So the most commonly suggested thing that most people have at home that can be used as a sharps/needle disposal is a laundry detergent bottle
That is what I'm using and it worked fine for the Aimovig injectable I was using for my migraines (which either did nothing or made me worse)
Unfortunately, because of the failure of the Aimovig we decided to switch me to Emgality which I did for the first time last night, and the first injection is actually done as 2 injections
Unfortunately I went to put these in my laundry detergent/sharps disposal container and low-and-behold the top of the pen (where the needle is) is WAY too big to fit through either hole!
Like what the fuck?
So I'm of course having to stress about what I should do since these are used needles that need to be disposed of but also have the potential to accidentally stick me again
My eventual solution was to tape up the area and smash it with a hammer until it could be dropped in (taping it prevented the needle and the broken plastic from getting everywhere) and like it did work but was WAY too much work and literally makes no sense seeing as even the Emgality website suggests the detergent bottle for sharps disposal and yet their auto-injectors are incredibly difficult to get inside them
-_-
3 notes
·
View notes
A tip for anyone taking Ajovy via auto-injector pen (and probably relevant for other auto-injector medications that have to be refrigerated and then brought to room temperature before injecting):
Once the pen has had a few hours out of the fridge to warm up a bit, hold it against your skin for a couple of minutes before you use it. This’ll make sure the pen is closer to the temperature (of the outside) of your body and it’ll be less of a shock introducing cold liquid into your warm body
I find this makes doing the injections hurt a lot less, especially if the ‘room temperature’ in my room is lower than room temperature is supposed to be
(Note: do not use any active method to warm up your medication as this could denature the medication! For comfortable injection it only needs to be as warm as the surroundings, hence using the surroundings to warm it)
1 note
·
View note
The Importance of Car Inspection: Ensuring Safety, Reliability, and Longevity
Regular car inspections are a fundamental aspect of vehicle maintenance that can significantly impact safety, reliability, and the overall longevity of your vehicle. By identifying potential issues before they become serious problems, car inspections help ensure that your vehicle operates efficiently and safely. This article explores the importance of car inspections, what they entail, and how they contribute to a safer and more reliable driving experience.
Why Car Inspections Are Crucial
Ensuring Safety:
Identifying Potential Risks: Regular inspections help detect issues that could compromise vehicle safety, such as worn-out brakes, faulty steering components, or malfunctioning lights.
Preventing Accidents: By addressing potential safety hazards early, inspections can prevent accidents and reduce the risk of breakdowns on the road.
Enhancing Vehicle Reliability:
Early Problem Detection: Inspections identify minor issues before they escalate into major problems, ensuring that your vehicle remains dependable.
Reducing Breakdown Risks: Routine checks can prevent unexpected breakdowns, which can be inconvenient and costly.
Extending Vehicle Longevity:
Maintenance and Repairs: Regular inspections allow for timely maintenance and repairs, which can prolong the life of critical components and systems.
Preserving Value: Well-maintained vehicles generally have higher resale values. Regular inspections and documented maintenance history can be beneficial if you decide to sell your vehicle.
Improving Fuel Efficiency:
Optimal Performance: Inspections ensure that all systems are functioning correctly, which can lead to improved fuel efficiency. For instance, a clean air filter and properly aligned wheels contribute to better gas mileage.
Compliance with Regulations:
Legal Requirements: Many regions have mandatory vehicle inspection programs to ensure that vehicles meet safety and emissions standards. Compliance with these regulations helps you avoid fines and legal issues.
What to Expect During a Car Inspection
A comprehensive car inspection typically covers various aspects of your vehicle to ensure its safety and performance. Key areas include:
Engine and Transmission:
Fluid Levels: Checking engine oil, transmission fluid, and coolant levels to ensure they are at the correct levels.
Leaks and Belts: Inspecting for any leaks, cracks, or wear in belts and hoses.
Brakes:
Brake Pads and Rotors: Examining the condition of brake pads and rotors for wear and tear.
Brake Fluid: Checking brake fluid levels and the condition of the brake lines.
Suspension and Steering:
Shock Absorbers and Struts: Evaluating the condition of shock absorbers and struts for signs of damage or wear.
Steering Components: Inspecting steering linkage and alignment.
Lights and Electrical Systems:
Headlights and Taillights: Ensuring all lights are functioning correctly, including headlights, taillights, turn signals, and brake lights.
Battery and Wiring: Checking the battery’s charge and inspecting electrical connections and wiring for any signs of corrosion or damage.
Tires and Alignment:
Tire Condition: Checking for tread wear, proper inflation, and signs of damage.
Wheel Alignment: Verifying proper alignment to prevent uneven tire wear and handling issues.
Exhaust System:
Muffler and Exhaust Pipes: Inspecting the exhaust system for leaks, rust, or damage, which can affect performance and emissions.
Interior and Comfort Features:
Seats and Seatbelts: Ensuring that seats, seatbelts, and airbags are in proper working order.
Climate Control: Checking the operation of the air conditioning and heating systems.
When to Schedule a Car Inspection
Routine Maintenance:
Manufacturer Recommendations: Follow the vehicle manufacturer’s recommended maintenance schedule for regular inspections, usually every 6 to 12 months or as specified in the owner’s manual.
Pre-Purchase or Pre-Sale:
Buying a Used Car: If you’re purchasing a used vehicle, a pre-purchase inspection can reveal potential issues and help you make an informed decision.
Selling Your Vehicle: A pre-sale inspection can help address any issues before listing your vehicle, potentially increasing its resale value.
After Significant Events:
Accidents or Collisions: Even minor accidents can cause hidden damage. Schedule an inspection after any collision or significant impact.
Warning Lights: If your vehicle’s dashboard warning lights are illuminated, it’s essential to have it inspected promptly.
Choosing the Right Inspection Service
Certified Mechanics:
Professional Expertise: Choose a reputable repair shop or service center with certified mechanics who have the expertise to perform thorough inspections.
Reputable Shops:
Reviews and Recommendations: Seek out repair shops with positive reviews and recommendations from trusted sources or friends.
Comprehensive Inspections:
Checklists and Reports: Ensure that the inspection service provides a detailed checklist and a comprehensive report of the findings.
Conclusion
Regular car inspections are an essential aspect of vehicle maintenance that contribute to safety, reliability, and longevity. By proactively addressing potential issues and adhering to a regular inspection schedule, you can ensure that your vehicle remains in optimal condition, reducing the risk of breakdowns and accidents. Prioritize car inspections as part of your vehicle care routine to enhance performance, protect your investment, and enjoy a safer driving experience
1 note
·
View note