#I was very happy to have that print ordered lol

[revivedredeemermareu]

I just gotta know...how do the ancients keep making yn come with them to face the beasts after going through BS with them. Do they have a super secret plan Z bribe? Like a bribe y/n can never resist and that's how they keep doing it? The snack to y/n's Scooby-Doo? Lmao!

Like now I can't help but imagine the cookies know about a treat y/n adores so much and they usually just give y/n the treat but since the cookies on both good and evil sides know y/n loves it so much and want y/n happy, they all made like a secret agreement to never use it as a bribe to bribe y/n because of it being so tempting to y/n...it's practically cheating using it. So they only do it in the most dire/desperate situations...

Ancient: come on y/n, you have to come with me/us to face [beast]

Y/n: NO! you can't make me! They are too scary and powerful and I already had my fill of them!

*after multiple different attempts to get them to come...*

Ancient: then you left me with no choice

*they go off...and then come back with the bribe.*

Y/n: wait...wait is that-

Ancient: would you do it for a [insert bribe here]

Y/n: OH YES YES YES!!!

or if you wanna add spice...imagine if it's treated very seriously like dead serious but then it's anticlimactic like...I'll use a bag of chips as a place holder for ultimate bribe...like it's a type of treat or object or idk but again gonna use place holder for example:

The ancients, the legendaries, dark enchantress, the beasts...all gather into a secret and hidden location. Each one of them held a key and all inserted it into the various key holes hidden all around the area but close by. With a single nod to time it, they all turn their keys at the exact same time. A thing rises from the ground...and after scanning finger prints...and a verbal satement spoken by the one who claimed they needed the bribe:

Pure vanilla (as an example): I, pure vanilla, have tried everything to get y/n to do what we really needed them to do...but all else failed...this is the final option and I choose to use it. I once again swear on the secret order of the y/n bribe that I will only use this bribe in dire circumstances and never use it to selfishly against our precious y/n. May y/n live happily!

(Or do some declaration along those lines lol!)

...it opens...and out rises a single bag of chips...which the cookie takes. The others nod then head off. .

(Just a secret society of the ultimate y/n bribe Lol!)

Instead of a bag of chips...

One million Rainbow Cubes is very much enough to bribe you on going back to Beast-Yeast.

[illusioncanthurtme--art]

Jack Horner makes a triumphant return to my tumblr!!!!!!1!

These are some drawings I included in my print orders. Mostly Jack, but also a few that went with others. I still have a LOT of all of my prints, INCLUDING the jack ones, so if you're interested, check out my store! (Also they're on sale - they're cheaper than they were when I first put them up. wink wink nudge nudge >:)) I'm putting original pencil drawings like these in every order I get.

[b4kuch1n]

hi! birthday. which means it's finally time t

yo what the itch store is fixed up now

damn what? I don't know where this came from. look all the comics I put on g*mr**d a year ago are back here again with all the formatting and typesetting by @fireflysummers as well as the exclusive bonus art wtf who did this. my werewolf comic on here too what the hells!! that one also got re-toned for printing if u want to AND an exclusive cover spread !!! what the fuck!!!!! come see for urself I can't make this shit up

[orcelito]

I GOT NEW STUFF INNNNNNN

Several things hfkdhfj

Love these stickers and I am OBSESSED with this print. God.

Also ft these lil freebies that I didn't order but LOVE. They came with the zine.

I DEFINITELY splurged on these keychains, but I love them so very much. Worth it ❤

And FINALLY...

All my current trigun merch together. Finally starting to get a collection ❤

[deoidesign]

if i may ask, is it difficult at all to re-edit/organize the comic pages from the webtoon format to fit the graphic novel format?

on another note, I'm so happy that your kickstarter was funded!!! I love time and time again, im so excited to see this all happen <3

I'll just turn this ask into something of a guide for the process! Because yes, it is difficult, but there are also many ways I have been preparing from the beginning for this very situation to make things easier for me!

I've worked in both print and scroll in the past, and have done this transition once before for a short story, so I already had familiarity both with my goals for print, and struggles with the transition!

How I prepared from the beginning for this transition:

1: My panels are 2500 pixels wide, so they can span my page (which is 8.3x5.8 inches) at 350 DPI (which is print quality)

2: My layers are organized: Text, FX, Foreground, Characters, Background

3: I draw one very large (twice as big as any panel would be, minimum) background for my major locations, as well as drawing furniture assets in isolation. This not only saves me time when making my actual episodes, but it also offers me INCREDIBLE flexibility when making this transition to print.

These 3 things let me pull the character art to the page by itself, scale it up or down to fit my panel, and then fill in the background behind the character.

So, I read the scroll version, decide how many and which panels I want on the page for the pacing (I also keep page spreads and page turns in mind while I am doing this), and then I pull those panels over from the scroll version to the page.

Then, I make the panel borders/page layout that I want, fit the character art into it, paste in the backgrounds, do any art editing that I need, add FX, and then re-do the text!

Sometimes I do need to draw parts that are missing (shoulders or elbows getting cut off is an extremely common one) and sometimes I need to adjust facial expressions, cut panels, or rearrange panels to make things read more clearly. Since it's my comic already, I know how to do these things while maintaining the original intent, but if I were working with someone else's comic I would need to work closely with them to know what can and can't be cut.

(original panel vs an expanded version)

Another common issue is that VERY tall panels will inevitably lose a lot of information when they’re turned to pages. Identify the purpose of the panel (pacing, showing a lot of detail, etc) and then replicate that with your page layout.

examples (in order) are: scene transition, being overwhelmed, suspense, and establishing shot. All of these were a single panel in the scroll version!

Another issue when converting pages is that panel order is a lot less straightforward than when starting from print format. Conversational back and forth that's fine in scroll often messes up the flow of reading in a page (characters facing out, not looking at eachother from panel to panel, etc) and so some creative solutions are necessary to keeping the reading order.

For the first page I had to delete and rearrange some panels, and in the second the dialogue bubbles guide us to read this page in a circle. (dialogue guides through a lot of my pages lol)

And the last really common issue that pops up is that height differences can be really difficult. Usually in print this is solved with clever angles, but I’ve already drawn everything. So, I’ll either resort to vertical shaped panels, panel pop-outs, or editing a character up or down to fit into the panel.

(examples in order)

So, yes, it is difficult! But I have a lot of experience with both formats, and having prepared for this from the beginning I've been able to make the transition a LOT more smoothly than I otherwise could have.

I hope this helps!

And, thank you about the kickstarter! I'm extremely excited I'll be able to print these, the proofs I've received so far look just absolutely stunning and I'm so so so excited to get to send them to people!!!

Obligatory self promo, if you want to see the kickstarter page and get these four books for yourself, then you can check it out here ^^ It's been funded, so at this point we're just reaching stretch goals and placing orders!

[genericpuff]

SO I just got my stay-flats in for mailing prints which means I'm one step closer to getting my online shop open <3

But what I WASN'T expecting to also show up inside the box of mailers was my pre-order copy of Covenant!

Apologies in advance because my photos aren't the greatest, but I wanna share some pics of it because I'm really impressed with how these books look and feel.

For starters, the actual cover designs. The front cover features stunning art and has a nice gloss cover, whereas the backside actually has a softer matte feel with gloss golden text which compliments the overall aesthetic of the book very nicely.

As for inside the book...

I was so relieved to see how well the formatting was done. Those who follow me here know I spend a lot of time bitching about webtoons-related stuff and one of my biggest gripes is how the webtoon format overall is very unfriendly to long-term publishing, as many creators don't anticipate eventually formatting for print (and Webtoons certainly hasn't helped as for years they've perpetuated the notion that print books are "dead", at least until it came to them making money 🍵) It's not an easy task to convert a vertical webtoon into a page format comic, but I'm happy to say that Lysandra's team here knocked it out of the park. The panel and text flow is smooth and easy to follow, they always take full advantage of the page space given to them, and the overall structure of every page feels very well thought out to work for the story it's trying to tell (as this is an action comic with fight scenes which can be tricky enough to pull off in page format, let alone converting from vertical format!) They've also gone out of their way to properly format the episode divides, so episodes (or as they're called in the story's stylization, "books") flow seamlessly with very little breakage, unlike what you would find in some webtoon-to-print books that often find the flow interrupted by episode title breaks every few pages. According to the credits page in the front of the book, we owe a lot of the formatting to layout designer Miranda Mundt and book designer Carey Soucy! Well done!

The print quality of the pages is also superb, printed on high-quality glossy paper which makes for stunning colors that have translated well from web to print. The darks are very dark which is necessary for a comic like Covenant which has a very earthy color palette; but when there ARE color pop moments of pink, red, and blue, they really shine. Of course, there is a downside to this, which is that the glossy paper WILL show your thumbprints in the darker areas (especially if you have particularly oily hands like I do, ech) but hey, it adds character and it's worth seeing the comic's art come to life on the glossy paper.

Sooo yeah! This is a very competent and well-made book from an awesome creator and if I have ANYTHING to snipe about just for the sake of it, it's that it's no wonder Webtoons tried to keep the creator from promoting their book launch, because it frankly outdoes a lot of WT's own publishing efforts LOL Congrats on your book launch Lysandra, I'm looking forward to getting my hands on Volume 2! <3

[monstermonger]

Hey!!

I have recently been going through a rough patch with my art. I am not enjoying or liking how I do linework and shading, and in order to remedy that, I'm collecting works from artists I like that I can study/re-imagine.

Your linework and composition is stunning 😍 and I am currently working on a reinterpretation of one of your pieces. This is the most fun I've had with a piece in a while. Beautiful work !! 👏 👏👏

....Er, I've been away from social media for quite a while, and even before that, I was behind on messages... I'm so sorry for my late responses to asks. I wanna say I appreciate ppl taking the time to send them, really :") thanks for the patience LOL

I'll try to condense this - respond to multiple in a single post. So I don't take up too much space in people's feeds.

so first of all @laurikarauchscat I'm sorry to hear you're in a rough patch, and I think your method of overcoming it is on the right track. At least, it's definitely something I do and it really helps me xD Most notably with all the Caspar David Friedrich-inspired pieces. As long as you give credit to the artists you're reinterpreting from (and asking is polite too, if they're an alive artist :D so yes thank you for asking) it seems perfectly fine to me to do so. Good luck and hope it goes well, I'm interested to see c:

More asks under the cut!

@blurred-antics thank you so much for the words ;b; it's validating to hear, since they're definitely emotions I have in mind while drawing lately. I lost both my parents in the last 2 years, and I've dumped a lot of feelings of grief/longing into my pieces since then, including ones that might seem rather cheerful and perfectly peaceful at a glance. I'm happy others can feel the bit of conflict under the surface-- I don't necessarily mind if my art comes across straightforward, since when throwing art into the public it must be accepted that everyone will interpret it how they want, but it does feel nice to know that some people sense the extra bits. Thank you again!

@kinnersonne thank you very much!! Definitely my favorite subjects at the moment c: You're very sweet.

@marinaaniseed I'm starting to get to ... quite old ones, and I worry this was a time-sensitive question :"D I'm very sorry if I'm too late.

First of all, thank you for asking! I'm honored people like my art enough they'd want it tattooed, it's pretty mind-blowing to me. I've actually had several people ask to use my art for tattoos the last few months and I think overall, I'm pretty okay with it. if you'd like to express support for my art for using it, then you're welcome to buy a print from my shop. It's not required, but it's very appreciated <3 Hope whatever you end up going for (whether my art or not in the end) goes well ^^

@wandersoffdoodling Aw, thank you T.T I'm happy they resonate with you! It's kind of my dream to finish some zines and some bigger projects in this sketchbook/journal art style. So that's very motivating to hear. Thanks again c:

@eldathe once again I apologize for how late I am to respond to questions that were intended to be very quick exchanges lol. First of all, thank you! :") I'm sure this is no longer relevant for how old this ask is, but in case you/(or anyone reading this) would still want to use it as a blog pfp or anywhere, yes, feel free, as long as there's credit somewhere visible! Thank you for asking <3

@starrforge thank you kindly, yours is great too :")

@herebesherlocks Aww thank you so much :") I'm honored it evokes that feeling.

@the-halcyon-effect 100 years later: thank you that's a huge honor to hear :"))))

[upsidedownsmore]

deck of playing card-sized prints I ordered from artscow just came in a couple days ago! (of this piece)

gonna try handing these out at tennocon this year! I might also order another deck or two since I'm pretty happy with this one (though i might make some adjustments if i have the time who knows)

(oh yeah and these prints are secretly just on the backs of regular ass playing cards cause it's cheaper (and maybe a bit gimmicky?) lmao)

I was inspired to go with playing cards partially due to people's suggestions on the original art post, but also because of this small outer wilds nomai print I got randomly from Fangamer alongside my copy of Tunic for switch! I just really like the idea of a smaller print having rounded corners I guess (the artist is Elliot Bouriot btw)

it's very cool I like this outer wilds print a lot :)

idk hopefully it'll be a fun thing to pass around at tennocon, would be cool to try and expand upon the idea in the future though! just might require a lot more work to feel like an actual product if I ever intend on selling this kind of thing lol

[bunni-lime-boutique]

Hiiii

Your work is soooo coolllllll!!!

If I may ask, what was your process in making the MM pants?

-XO

Hiii! Thank you so much!! And Great Question! I didn't take too many pictures of every single part of the process so this is going to be mostly words if that's ok 😅

but here's

How I Made The Mutant Mayhem Pants

First We Need Our Materials:

An Idea or A Drawing Of Your Design

A nice pair of pants ( The wider the pants leg the more space for your design! So I personally prefer to not use skinny jeans but at the end of the day it's up to you! :D )

Eyelets

Heat Transfer Paper

Something Non permanent to mark your pants ( I used heat erasable fabric pens )

Scissors

Parchment Paper

Clothing Iron

Shoelaces ( or whatever you want to connect the pants like chains or ribbon or safety pins etc. )

Step 1: Design

I use the app Procreate on my iPad to design all my projects! I just take a picture of the piece of clothing whether it's shoes or clothes and edit/draw my design on top of it until I'm happy with it! ( which usually takes a really long time 🤣 these took me 14+ hours to design )

Also here's a secret tip I used for this project: I put a denim overlay over the gray parts of the design before printing it so that when I printed it on the pants it blended in perfectly with the denim jeans! You can't even tell it was printed on, it looks like it was always there!!

Step 2: Cutting the Pants!

Use the Non-Permanent Pen where you want the opening of the pants to be. ( if you're making them for yourself then you can always double check by trying them on before cutting them just to make sure that they're being cut in the right place! ☝️🏽 )

Then once the markings are good, cut the pants!

Step 3: Eyelets!

Once I had the pants cut, I marked where I wanted the eyelets to go with my non permanent pen. Then I added them in one by one! If you've never worked with eyelets before it's not that hard. You can find a bunch of tutorials on Youtube! That's what I did lol! There's NO SHAME in being a beginner! :D ( Also beginner tip: practice putting the eyelets in the scrap pieces of pants that you just cut off )

Step 4: Printing and Cutting out the design

Get your heat transfer paper and print whatever your design is with a printer! If you have a big design like mine I had to use 2 pieces of heat transfer paper for each turtle!

Then after I took this picture I cut them out! Then I sat them on the jeans again for a couple of minutes just to make sure that they were perfect and I didn't need to re-print them! ( also to make sure I liked the order they were in. I put my favorite 2 ninja turtles at the top so that if I wanted to remove the shoelaces and wear these pants as shorts I would only be left with my favorites...so sorry leo and raph 😅)

Step 5: Ironing Them On

Place the design where you want it, cover it with parchment paper, and then iron it on the highest setting with no steam! THE NO STEAM IS VERY IMPORTANT, PLZ DON'T FORGET TO DUMP THE WATER OUT OF THE IRON BEFOREHAND ☝️🏽

Step 6: Shoelaces

Put the Shoelaces ( or whatever you used to keep em together! :D ) inside the eyelets. Then I just tied them like I would tie a shoe but it doesn't really matter how you tie them as long as they're secure!

Step 7: Cry and Marvel at your astounding work

And there you have it!

That how I made the Mutant Mayhem pants!!

Next time I do a project like these I'll take more pictures of every step, but until then I hope this was helpful!!

If ya ever make these or use this tutorial for anything plzzz tag me! I wanna see what ya make!! :DDD

And if there was any part of this tutorial you want me to elaborate on OR you know/found a better way to do some of the steps then please let me know!!! :D

[asaka-lucy-dr-rc]

苗木くんパーカーが届いたー！！！(届いてすぐハンガーにかけただけの写真なので皺くちゃですみません)

The Makoto Naegi hoodie I ordered has arrived!!! (This photo was taken as soon as it arrived, so it's very wrinkled. Sorry about that!)

買ったのはこれです↓ What I bought is this:

ロングテールパーカーなので後ろの方が長い。 It's a long-tailed hoodie, so the back is longer.

全体的にいいデザインだと思うけど、個人的に購入の決め手になったのがフードのプリントがちゃんと再現されてること。 I think it's a good design overall, but what made me decide to buy it personally was the fact that the print on the hood was reproduced accurately.

あとちゃんとダブルジップになってる。フードと学ランは内側で縫い合わせられてるので脱げない仕様。 It also has a double zipper. The green hoodie and the black school uniform on the outside are sewn together on the inside.

商品説明にある写真の通りの見た目にするにはちゃんとアイロンをかけてあげなきゃだけど、全体的にちゃんと思った通りの商品で良い感じ！ I need to iron it properly to make it look exactly like the photos on the product page, but overall I'm very happy with it!

問題はこれを買ったはいいけど特に着る機会がないことだけですね。笑 The only problem is that I bought it, but I don't have any opportunities to wear it. lol

[christanworkshop]

DIY: Making A Pwnagotchi

Yes, I know I am very late to the game ... LOL I was meddling with Flipper Zero and war driving, then I came across the Pwnagotchi project. Since I already had the parts to do this lying around in my workshop, I decided to put together my own Pwnagotchi just for fun. Started by hooking up the Waveshare 2.13" Black and White E-Ink Display to a Raspberry Pi running a fresh Raspbian image and downloaded the Waveshare demo code to test the display to make sure it's working properly, since I have not actually used it before. This is a v4 display.

After that, I just followed all the instructions over here to put it all together, including adding a real time clock. I used the DS3231 RTC module designed for Pi, but in order to make it fit into the space between the display and the Pi board, I had to make some modifications. The female header pins on the RTC module was desoldered and short wires were soldered on. The battery also had to be desoldered and resoldered on in a new positionlike below to make the module thin enough. The module was then wrapped in wire tape for insulation. Now, we can just slot the wires into the female header pin holes of the display before we snap it onto the Pi board.

Below, you can see the RTC fits comfortably between the boards. I also attached a UPS Lite v1.2 board. Apparently, the UPS Lite board I had was a clone/knock off. It uses I2C address of 0x32 instead of 0x36 that was used in the original product, so the UPS Lite plugin in Pwnagotchi won't work. Oh well, I will just use it like a normal battery pack.

Now, for the software. The original Pwnagotchi project has not had any new updates for over 2 years, so it's kinda out of date and it doesn't support the newer Waveshare displays. Luckily for us, someone had taken the effort to fork the project and released new versions of Pwnagotchi over here. Note that this requires Raspberry Pi Zero 2 W.

The Waveshare 2.13" E-Ink display that I had was v4, but I found that I had to set the display type to "waveshare_3" in Pwnagotchi settings for it to work properly. Next is to 3D print a case for this, but in the mean time, I used some nano bricks to build a temporary case for it.

That's it for now. Happy hacking!

[galaxia-art]

[id in alt text]

hello! if you happen to be in the uk then good news because etsy is doing £5 off orders over £30 until tomorrow midnight so feel free to check out my shop!

if you're not in the uk there's no deal i'm afraid but there's still a bunch of cool stickers, prints, pins, and such! would also make me happy lol

also have new pins!! very excited about them, as i haven't had the chance to take these ones to a convention yet (next con is animangapop cardiff in june)

[boxturret]

Captains Done!

I've now finished the Pikmin Captain figures I was working on! There's two different bodies, and a helmet and non-helmeted head, so effectively there's two complete sets of figures. The heads can be swapped around too!

I had to go with a solid helmet just due to the complexity involved in attempting to do a clear thing at this scale. Its something that's plagued me for years. Can't really find an off the shelf solution, and casting something in resin just has too high a cost of failure. I like this fine though, it gets the idea across, and I can swap out the fully detailed head whenever I feel like it. Its kind of nostalgic in a way, since its similar to how I handled the helmet on my very first attempt, well over a decade ago.

This guy's probably still a bit larger than the new ones, but he's so much smaller than the monstrosity I made most recently.

That helmet dome is the same ones I used for the cockpit canopies in the ship, to show how massive everything got lol. Really it was a ton of work to get that dome working for the helmet, and in the end it just looks so wrong being round, the real one is so squished and oddly shaped. I was really happy to be able to capture that with these.

Here's the seated bodies. They're meant to be able to fit in the cockpits, but when I tried it was a bit snug and I cracked Louie's hair a bit...so I don't think I'll be trying that again soon. I printed out the comfy chair model I made for the gold version of the ship too, just for something for Shachou to sit on.

I also printed off a little Olimar sprout from the bad end of Pikmin 1(the end I actually got the first time I played...I was not good at the game*) I'm really happy with the dirt.

He doesn't have a leaf yet, I want to start working on the Pikmin themselves soon, and I have ideas for how to handle the leaves, and I want everything to be consistent, so I'm not rushing it for now.

I'm also starting to really get in to a treasure hunting mood, I've got the marbles, I found the perfect shuttlecock just lying around our garage, and I've ordered some correct shoe polish, hanafuda cards, and a bunch of blank bottle caps, so that's probably going to be a thing going forward.

I spent so long this evening looking at globes, I think I'm just going to make my own lol.

*I didn't know about Pikmin drowning so I walked straight in to the lake in the Forest of Hope with a full complement of Reds and Yellows and didn't know about whistling to save them, there were no survivors.

[casdeans-pie]

Hi! First off, love your fics. They brighten my day. and your latte art is cool too.

Secondly, I've seen that you've gone to a few cons and I was curious what tips you'd give a baby con-goer who's going to their first spn con in a month? Also, what should I bring to have signed for an auto?

This might be a weird ask but I don't know who else to ask for con tips lol.

Hi Anon! Thanks so much !! ❤️ happy you're enjoying the stories! I have like a bazillion wips buzzing around my brain at all times so there will be plenty more!

And I genuinely wish I could pass you all supernatural themed coffees through my phone honestly lmaooo

Oooh!! First spn con! That's exciting because my first one wasn't objectively 'the best' but to. this. day it remains my favourite. It's so special to me. It'll be so so good you'll love it. The vibe at these kinds of cons is unmatched because spn fans are literally the friendliest people out there

Nothing quite like the bonds spn fans forge in The Queues. One big tip I'd give is to strike up a conversation with the folks around you - ask what they're getting signed or what poses they're doing - boom! Queue Friends.

Get all of your QR codes or tickets ready in the order you're gonna need them, so there's no panicking when you go for autos or photos. And definitely get a hard folder to put your autographed prints/photo ops in.

Don't forget a bottle of water! And lots of snacks!! And a portable charger/battery pack for your phone!! Mine dies in like a few hours so the extra power is a must.

Enjoy the very special vibe - soak up the atmosphere! There's just, a crazy amount of joy and hype at these things and if I could find a way to bottle it I would

As for stuff to get signed - it depends if you want a print of a character or not, cause usually they have those available at the signing itself on a desk nearby. So you wouldn't have to worry about taking anything. And the character prints always look rad with the signature on. OR you could get a dvd signed? Some artwork? Spn book? Some obscure merch you found? (my favourite kind)

Anyway I've rambled long enough lmao sorry anon you asked me a simple question and I have shot off into the stratosphere of long winded replies

It's not a weird question at all! The funny thing is that when you've done more (because there's always more spn cons) you'll look back on your first like, ah I didn't know what I was letting myself in for..... Addiction is such a negative word, but I'm struggling to think of another.... lmaoooo

Have an amazing time!!!

[blueskittlesart]

My zine arrived!!! The quality is so good it’s so awesome to be able to hold all these comics!!

I took a art book publishing class last semester so I’m inclined to ask how you chose the paper weight / texture you did and if you have any advice when it comes to printing art?

Love all your work!

hi im so glad it arrived safely!

The printer I used is called mixam, which i found because it was the same printer used for a few other collaborative zine projects i've been on. Their process for printing is really user-friendly and customizable so I liked them a lot!

As for how I chose paper weight and texture, i had a general idea of what I wanted and what was going to work best for what I was printing--I needed paper that was heavy enough that large blocks of black wouldn't show through from page to page, for example, while also not making the book too thick to be staple-bound, and for the cover I knew I wanted a matte finish because colorful digital art generally prints and displays better on matte paper than glossy. After that it was a matter of picking options that fit those constraints without getting too expensive to print, which wasn't hard since the interior printing was all black-and-white which brought down the cost significantly. I did order a prototype to make sure that my choices worked well physically, and thankfully I was happy with the quality I got and didn't need to order another prototype with different options, but that's what I planned to do if I needed to make any changes ahead of ordering the big batch.

As for general advice about printing art, I've always used the highest possible resolution files any given program can handle, and if I know I plan on printing something I work in CMYK. I've found that if a colored piece is heavy on blacks or very dark colors it doesn't print well, which is part of why I kept the cover of the zine so light. If i DO need to print something that's really dark, I usually bump the contrast considerably higher with the assumption that it will print darker than it looks on my screen. (I didn't originally plan on printing the interior comics in the zine, so some of the artwork had to be cropped or expanded to fit the print dimensions, but luckily they were black and white already so no color problems occurred in the printing process lol)

[thelunarfairy]

As I rambled on about my favorite characters I realized something. I've been curious for a while about Natsuhiko and Tsukasa and the kind of relationship they have, since they're on the same "team" so to speak. I believe that Natsuhiko is helping mainly because of Sakura, but if there is any other reason we don't know yet, but we do know that Tsukasa tends to use his help a lot (as I think, Tsukasa is the mind, Sakura is the voice and Natsuhiko the group's hands).

Today I realized that (apparently) neither of them even mention each other's names in the entire manga, so far so good, right? The twins don't usually mention many people's names, and from my memory Tsukasa only mentioned the names of people who know him (Nene-chan, Amane, Kou-kun, Mitsuba and I don't remember if he ever mentioned Shijima's name ), and Natsuhiko hasn't been seen talking to that many people either, but he seems to have a lot of knowledge about others.

But my point comes in now, we know that Tsukasa doesn't usually follow commands or orders from anyone, and not even from Sakura who is his assistant, however, whenever Natsuhiko stops Tsukasa from doing something he seems to obey. These are simpler things that are not Tsukasa's goals, but from the way he was described it seemed like he wouldn't listen to anyone regardless of whether it was an important situation or not. Natsuhiko seems to act like an older brother (to both Tsukasa and Mitsuba), lecturing him, stopping dangerous games, teaching him how to treat a girl, stopping him when he does something wrong, and Tsukasa seems to accept that.

(prints in portuguese because they are easier to find)

It really feels like a younger brother obeying an older brother sometimes. And I find all of this funny because they never say each other's names, since Natsuhiko always refers to Tsukasa as "shrimp", and even though they work together, Tsukasa never spoke his name either (from what I looked for).

Natsuhiko is a character who is starting to gain more importance and is having his abilities revealed, so much so that Tsukasa tends to use Natsuhiko's immortality to his advantage (as already seen in chapter 22), we still don't know the outcome for him in history, or its origin, but he certainly has a very important role

Maybe I thought too much tonight (it happens lol), but I was very intrigued by the fact that even though they've known each other for a long time now, have had a good amount of interactions and the way they happen, they've never said what each other's name.

(If they have already said each other's names please let me know, because I couldn't find any of their lines)

(Ps.: I love your analyzes and I really like the way you build them! This has helped me come back to formulate more theories too :))

I once saw Natsuhiko say that he takes care of the children, I don't remember the chapter, but it seems that this is one of his functions. Tsukasa can be rude to him sometimes, but nothing too serious, he doesn't treat Sakura and Natsuhiko the same way he treats Mitsuba.

Maybe that's why that theory came up that Sakura and Natsuhijo are the twins' parents, a problematic theory to say the least. There is a kind of respect between them, working towards something together.

We don't know what Natsuhiko's role is in the narrative, but given the great power and ability he has, I imagine it's something pretty big. I've seen theories talking about the possibility that Natsuhiko could be God himself, another theory that has big holes.

I didn't stop to think about them much because we have few clues, it's not possible to formulate anything very complete about it for now. Regarding names, he says Sakura's name, but doesn't say Natsuhiko's, in the same way that Hanako says Yashiro's name, but doesn't say Kou's.

Interesting, isn't it?

Awwww how sweet, I'm happy to know that you like my theories S2, it's always good to reread the manga trying to unravel the mysteries