#maintenance guide

[trainz99]

Recently found out that the Rand McNally TND 550 has no references anywhere online for how to open it for e.g. a battery replacement.

Let me throw my two cents in!

I found out the hard way that using a heat gun to pry off the touch panel only grants access to the, uh, touch panel adhesive backing. That is not the way to go about this.

Turns out the body clips together - the seam between the rubberized back portion and the glossy plastic front portion is where you gotta attack it with a metal spudger blade. Bottom center is the best starting point because it's relatively flexible and also the least seen place for if/when you scuff the plastics. Then it's just a matter of moving around the seam, unclipping the two pieces. Once it's fully open, make sure to watch for the two ribbon cables - one goes to the LCD and the other to the TFT panel.

Basically, like opening a 4th gen ipod, but the seam is a lot tighter.

I hope this helps at least one person avoid my heat gun mistake haha

[intheairbike]

Electric Bike Winter Maintenance Guide!

 The weather is getting colder and colder, presumably many friends are still rain or shine, and can't bear to close the car. If a worker wants to do a good job, he must first sharpen his tools. Electric bicycles can be said to be sports machines. To make this machine exert its maximum power, you must pay attention to the maintenance of your car when riding in winter. A comprehensive inspection of your car after leaving the car can not only prolong the service life of the car. It can eliminate many hidden dangers and improve safety! Let's take a look at the winter maintenance guide for electric bike!

Maintenance description and purpose of each part of the bicycle:

1. Head

Maintenance description: Check whether the bearings at the upper and lower ends of the head tube can be used normally, clean and oil the bearings.

Maintenance purpose: to clean the dust and sludge of the bearings in the head tube, to prevent bearing damage, rust and abnormal noise.

2. Axis

Maintenance description: Check whether the center shaft can be used normally, clean and oil the bearings.

Maintenance purpose: to clean the dust and sludge in the bottom bracket and bottom bracket to prevent damage, rust and abnormal noise of the bottom bracket.

3. Wheel front and rear hubs

Maintenance description: Check whether the hub can be used normally, clean and oil the balls in the hub.

Maintenance purpose: Check whether the hub can be used normally, clean and oil the balls in the hub.

4. Wheel set adjustment (front and rear wheels)

Maintenance description: Put the wheel set on the ring adjustment table to check whether it is deflected, and adjust it according to the situation (Nalong)

Maintenance purpose: to reduce the deflection of the wheel set to make the handling better.

5. Transmission system (front and rear derailleurs, flywheels, chains, cranksets)

Maintenance description: Check the transmission system: whether the front and rear derailleurs, flywheels, chains, and chainrings can be used normally, clean the dust and sludge, replace with new oil, and adjust the gear.

Maintenance purpose: reduce excessive wear caused by sludge and other sundries, and prolong the service life of flywheel and chain.

6. Frame

Care Description: Clean the body and remove stains.

Electric bike maintenance process

Step 1: Clean the Dirt

If the body is not very dirty, just wipe it with a damp soft cloth; if there are many mud spots, you can wash it with a water hose. It should be noted that the pressure of the water column should not be too high. At the same time, the rotating parts such as triaxial and headset cannot be washed directly with water. A toothbrush can be used for places that cannot be wiped by a rag, and the upper tube of the front fork should also be removed with a toothbrush to avoid scratches during shock absorbers. Both the rim and the brakes need to be cleaned to remove the impurities embedded in the brakes and reduce unnecessary wear and tear. Brakes and shift cables should also be wiped clean. If there is a lot of mud and sand, the wire tube can be removed and the internal chain can be cleaned with the spray pressure of the anti-rust agent. The most dust-absorbing place on the whole car, wipe off the stains with a rag. If it is very dirty, you can use an anti-rust agent to clean it. Remember to dry the chain after completion to facilitate subsequent chain oiling.

Step 2: Lubricate

Brake and shifting line pipes need to be re-oiled after cleaning, and grease lubricating oil with weak fluidity is suitable for use on the line pipes. The chain is an important part of the transmission, and it also has high requirements for oiling. Generally, 5-6 drops can be added at a time. After adding, let the chain fully rotate, and at the same time bring lubricating oil to each tooth piece, and dry the chain with a rag after adding. After cleaning the upper tube of the front fork, special lubricating oil should be used to keep the front fork moving smoothly in winter.

Step 3: Prevent Rust

After riding, it is recommended to apply some anti-rust agent to the various screws and transfer points on the bicycle. Firstly, it is anti-rust, and secondly, it is also good for future disassembly.

Electric Bike Winter Maintenance Guide!

[dmimpex]

How to Maintain Lathe Centers for Longevity and Performance

Lathe centres are critical to the accuracy and efficiency of machining processes. These essential components provide precise rotation and alignment, crucial for achieving high-quality output. Whether you're a seasoned expert or a weekend hobbyist, an appropriate lathe centre maintenance guide is critical to ensuring their longevity and best performance. We dig into the world of lathe centres in this thorough tutorial, presented to you in collaboration with RR Tool Store - a reputable machinery tool accessories manufacturer and authentic vendor in India - delivering vital insights and recommendations to maintain your machining activities smooth and successful.

Understanding Lathe Centers

Lathe centres, lathe points or lathe dogs are essential in turning and machining operations. They support the workpiece while allowing it to rotate precisely. Lathe centres are classified into two types: active centres and dead centres, with each providing a specific purpose.

Lubrication is the lifeblood of any machine, including lathe centres. Lubricate live centres' bearings and moving parts regularly to reduce friction and heat buildup. For best results, use high-quality lubricants recommended by the manufacturer.

Examine your lathe centres for wear and damage. Examine the taper surfaces for dents, dings, or excessive wear. To preserve precision and accuracy, replace any centres exhibiting significant deterioration symptoms.

Proper Storage: A Place to Keep Your Tools

Keep your lathe centres in a clean and dry place when not in use. Consider utilizing protective caps or cases to keep dust and moisture out of your electronics.

Unbalanced lathe centres can cause vibrations and poor outcomes. Before using your lathe, balance the centres to ensure smooth and stable spinning. To help with this process, RR Tool Store sells high-quality balancing accessories.

It is critical to invest in high-quality lathe centres to achieve consistent output. RR Tool Store, a reputable machinery tool accessories manufacturer and seller in India, provides a diverse assortment of precision-engineered lathe centres designed to fulfil the needs of both professional machinists and enthusiasts.

Lathe Center Types: Select the Best Fit for Your Needs

Centres that are dead:

Dead centres are stationary centres frequently employed to support the tailstock end of a workpiece. In addition, they are available in various styles, including plain, ball, and carbide-tipped, each serving a specific purpose. RR Tool Store has many dead centres to meet your machining needs.

Living Centers:

Live centres have bearings that allow rotation and support the rotating end of the workpiece. They are helpful for high-speed machining applications because they reduce friction and ensure a smooth process. RR Tool Store provides a variety of live centres with various bearing styles to meet multiple machining needs.

5 Tips for Lathe Center Maintenance

Precision machining requires lathe centres to ensure correct rotation and alignment. Follow these five performance tips to ensure their longevity and performance:

Routine Lubrication: Feed for Smooth Operation

Lubrication is the lifeblood of all machinery, including lathe centres. Lubricate the bearings and moving parts of your centres with an appropriate lubricant. Lubrication regularly lowers friction, wear and strain and avoids overheating during continuous usage. See your lathe's handbook or a specialist for suggested lubricants and intervals.

Keep it Clean: Hygiene as a Virtue

For maximum extending lathe centre life performance, cleanliness is essential. After each usage, remove accumulated dust, chips, and debris from the spindle and the lathe's centre. In addition, to guarantee thorough cleaning, use a soft brush and compressed air. During machining processes, a clean environment avoids contamination and ensures exact alignment.

Inspection and Maintenance: A Closer Look

Inspecting your lathe centres regularly is critical to detect wear, damage, or misalignment. In this maintenance guide, look for signs of wear on the taper surfaces, such as dents, scratches, or unevenness. To preserve accuracy, replace broken centres as soon as possible. Check for any bearing play or excessive wobble, which may signal the need for correction or replacement.

Sheltered Care: Proper Storage

Store your lathe centres in a designated space away from dust, moisture, and potential damage when unused. Consider using protective cases or coverings to protect them from the weather. Proper storage avoids corrosion and physical damage, ensuring your extending lathe center life stays in top shape.

Precision Requires Balance: Equilibrium

Smooth and accurate rotation requires balanced lathe centres. Unbalanced centres can cause vibrations and compromise machining quality. In addition, invest in a premium balancing kit or use specialist balancing accessories to maintain precise equilibrium. Balance your centres regularly to ensure consistent and high-quality machining results.

Lathe Center Best Practices

Avoid Excessive Stress

Excessive strain on the lathe centres might cause early wear and damage. Moreover, use the proper cutting pressures and ensure the workpiece is gripped correctly without putting too much pressure on the centres.

Workpiece Balance

Unbalanced workpieces can create vibrations, resulting in poor machining results and possibly lathe centre damage. Moreover, use counterweights or support tools to establish a balanced and stable configuration for easier machining operations.

Regular Inspection

Frequent examination is essential for detecting wear, misalignment, or damage to your lathe centres. Perform visual and physical inspections before and after each machining operation. Keep an eye out for taper surfaces, bearings, and overall stability. Likewise, address any concerns as soon as possible to avoid further troubles and to preserve peak performance.

Proper Lubrication

Lubrication is a critical component of lathe centre maintenance. Apply the specified lubricant regularly to maintain smooth movement and prevent friction. Centres that are well-lubricated not only improve performance but also avoid overheating and excessive wear. Likewise, consult the manual for your lathe or seek professional guidance to find the best lubrication routine for your specific configuration.

Mindful Storage

Proper storage is essential for protecting your lathe centres during downtime. Keep them clean and dry, free from dust, humidity, and potential impact. Likewise, consider using protective cases or coveextending lathe center liferings to safeguard them from the weather. By providing a safe resting place, you protect your lathe centres from corrosion, pollution, and physical harm, keeping their quality.

The Art of Equilibrium

Keep your lathe centres balanced to ensure exact rotations and optimum machining results. Unbalanced centres can wreak havoc on the entire process and jeopardize the quality of your work. Moreover, use balancing kits or accessories to ensure that your lathe centres are in optimal balance before each machining session.

You may improve your lathe centres' performance, lifespan, and accuracy by following these best practices with the best performance tips. Additionally, with each cautious step, you contribute to the overall efficiency and success of your machining operations. Implementing these principles, in collaboration with a reputable provider such as RR Tool Store, guarantees that your extending lathe center life continue to function as dependable tools in your pursuit of machining perfection.

[thatmexisaurusrex]

This is for @sambuckylibrary's SamBucky Summer Bingo 2024 for the prompt "Meanwhile, on the Boat..." It's a little vibe-y, but it's about Sam and Bucky fixing the boat. What Sam needs in his life 🥰 Under the cut will be what's written up top!

PAGE 1: A FALCON'S GUIDE TO BOAT MAINTENANCE

Sides: WHAT DOES A FALCON NEED FOR BOAT MAINTENANCE?

01: A younger sibling who somehow knows way more about boats than you do and can fix them better despite you being a literal rocket scientist.

02: A family boat in need of some love and maintenance. A family boat filled with memories of childhood. A family boat that Sam Wilson is going to fix.

03: An ex-assassin who is totally not in love with Sam Wilson, nope. He just moved to Delacroix for no reason, why did you ask? Maybe you’re the one in love with Sam Wilson. Leave him alone.

04: A certain Captain America who won’t give up, no matter how terrible he is at boat maintenance. He can do this. He doesn’t need instructions to fix this boat. He’s a rocket scientist in all but name. What could go wrong?

Corner: THINGS WILL GO WRONG

PAGE 2: AND REMEMBER! ALL FALCONS NEED:

The love and affection of a Winter Soldier

Time off with family

An emotional support Redwing

A beloved protege

[mostlysignssomeportents]

Deb Chachra's "How Infrastructure Works": Mutual aid, the built environment, the climate, and a future of comfort and abundance

This Thursday (Oct 19), I'm in Charleston, WV to give the 41st annual McCreight Lecture in the Humanities. And on Friday (Oct 20), I'm at Charleston's Taylor Books from 12h-14h.

Engineering professor and materials scientist Deb Chachra's new book How Infrastructure Works is a hopeful, lyrical – even beautiful – hymn to the systems of mutual aid we embed in our material world, from sewers to roads to the power grid. It's a book that will make you see the world in a different way – forever:

https://www.penguinrandomhouse.com/books/612711/how-infrastructure-works-by-deb-chachra/

Chachra structures the book as a kind of travelogue, in which she visits power plants, sewers, water treatment plants and other "charismatic megaprojects," connecting these to science, history, and her own memoir. In so doing, she doesn't merely surface the normally invisible stuff that sustains us all, but also surfaces its normally invisible meaning.

Infrastructure isn't merely a way to deliver life's necessities – mobility, energy, sanitation, water, and so on – it's a shared way of delivering those necessities. It's not just that economies of scale and network effects don't merely make it more efficient and cheaper to provide these necessities to whole populations. It's also that the lack of these network and scale effects make it unimaginable that these necessities could be provided to all of us without being part of a collective, public project.

Think of the automobile versus public transit: if you want to live in a big, built up city, you need public transit. Once a city gets big enough, putting everyone who needs to go everywhere in a car becomes a Red Queen's Race. With that many cars on the road, you need more roads. More roads push everything farther apart. Once everything is farther apart, you need more cars.

Geometry hates cars. You can't bargain with geometry. You can't tunnel your way out of this. You can't solve it with VTOL sky-taxis. You can't fix it with self-driving cars whose car-to-car comms let them shave down their following distances. You need buses, subways and trams. You need transit. There's a reason that every plan to "disrupt" transportation ends up reinventing the bus:

https://stanforddaily.com/2018/04/09/when-silicon-valley-accidentally-reinvents-the-city-bus/

Even the cities we think of as motorists' paradises – such as LA – have vast, extensive transit systems. They suck – because they are designed for poor people – but without them, the city would go from traffic-blighted to traffic-destroyed.

The dream of declaring independence from society, of going "off-grid," of rejecting any system of mutual obligation and reliance isn't merely an infantile fantasy – it also doesn't scale, which is ironic, given how scale-obsessed its foremost proponents are in their other passions. Replicating sanitation, water, rubbish disposal, etc to create individual systems is wildly inefficient. Creating per-person communications systems makes no sense – by definition, communications involves at least two people.

So infrastructure, Chachra reminds us, is a form of mutual aid. It's a gift we give to ourselves, to each other, and to the people who come after us. Any rugged individualism is but a thin raft, floating on an ocean of mutual obligation, mutual aid, care and maintenance.

Infrastructure is vital and difficult. Its amortization schedule is so long that in most cases, it won't pay for itself until long after the politicians who shepherded it into being are out of office (or dead). Its duty cycle is so long that it can be easy to forget it even exists – especially since the only time most of us notice infrastructure is when it stops working.

This makes infrastructure precarious even at the best of times – hard to commit to, easy to neglect. But throw in the climate emergency and it all gets pretty gnarly. Whatever operating parameters we've designed into our infra, whatever maintenance regimes we've committed to for it, it's totally inadequate. We're living through a period where abnormal is normal, where hundred year storms come every six months, where the heat and cold and wet and dry are all off the charts.

It's not just that the climate emergency is straining our existing infrastructure – Chachra makes the obvious and important point that any answer to the climate emergency means building a lot of new infrastructure. We're going to need new systems for power, transportation, telecoms, water delivery, sanitation, health delivery, and emergency response. Lots of emergency response.

Chachra points out here that the history of big, transformative infra projects is…complicated. Yes, Bazalgette's London sewers were a breathtaking achievement (though they could have done a better job separating sewage from storm runoff), but the money to build them, and all the other megaprojects of Victorian England, came from looting India. Chachra's family is from India, though she was raised in my hometown of Toronto, and spent a lot of her childhood traveling to see family in Bhopal, and she has a keen appreciation of the way that those old timey Victorian engineers externalized their costs on brown people half a world away.

But if we can figure out how to deliver climate-ready infra, the possibilities are wild – and beautiful. Take energy: we've all heard that Americans use far more energy than most of their foreign cousins (Canadians and Norwegians are even more energy-hungry, thanks to their heating bills).

The idea of providing every person on Earth with the energy abundance of an average Canadian is a horrifying prospect – provided that your energy generation is coupled to your carbon emissions. But there are lots of renewable sources of energy. For every single person on Earth to enjoy the same energy diet as a Canadian, we would have to capture a whopping four tenths of a percent of the solar radiation that reaches the Earth. Four tenths of a percent!

Of course, making solar – and wind, tidal, and geothermal – work will require a lot of stuff. We'll need panels and windmills and turbines to catch the energy, batteries to store it, and wires to transmit it. The material bill for all of this is astounding, and if all that material is to come out of the ground, it'll mean despoiling the environments and destroying the lives of the people who live near those extraction sites. Those are, of course and inevitably, poor and/or brown people.

But all those materials? They're also infra problems. We've spent millennia treating energy as scarce, despite the fact that fresh supplies of it arrive on Earth with every sunrise and every moonrise. Moreover, we've spent that same period treating materials as infinite despite the fact that we've got precisely one Earth's worth of stuff, and fresh supplies arrive sporadically, unpredictably, and in tiny quantities that usually burn up before they reach the ground.

Chachra proposes that we could – we must – treat material as scarce, and that one way to do this is to recognize that energy is not. We can trade energy for material, opting for more energy intensive manufacturing processes that make materials easier to recover when the good reaches its end of life. We can also opt for energy intensive material recovery processes. If we put our focus on designing objects that decompose gracefully back into the material stream, we can build the energy infrastructure to make energy truly abundant and truly clean.

This is a bold engineering vision, one that fuses Chachra's material science background, her work as an engineering educator, her activism as an anti-colonialist and feminist. The way she lays it out is just…breathtaking. Here, read an essay of hers that prefigures this book:

https://tinyletter.com/metafoundry/letters/metafoundry-75-resilience-abundance-decentralization

How Infrastructure Works is a worthy addition to the popular engineering books that have grappled with the climate emergency. The granddaddy of these is the late David MacKay's open access, brilliant, essential, Sustainable Energy Without the Hot Air, a book that will forever change the way you think about energy:

https://memex.craphound.com/2009/04/08/sustainable-energy-without-the-hot-air-the-freakonomics-of-conservation-climate-and-energy/

The whole "Without the Hot Air" series is totally radical, brilliant, and beautiful. Start with the Sustainable Materials companion volume to understand why everything can be explained by studying, thinking about and changing the way we use concrete and aluminum:

https://memex.craphound.com/2011/11/17/sustainable-materials-indispensable-impartial-popular-engineering-book-on-the-future-of-our-built-and-made-world/

And then get much closer to home – your kitchen, to be precise – with the Food and Climate Change volume:

https://pluralistic.net/2021/01/06/methane-diet/#3kg-per-day

Reading Chachra's book, I kept thinking about Saul Griffith's amazing Electrify, a shovel-ready book about how we can effect the transition to a fully electrified America:

https://pluralistic.net/2021/12/09/practical-visionary/#popular-engineering

Chachra's How Infrastructure Works makes a great companion volume to Electrify, a kind of inspirational march to play accompaniment on Griffith's nuts-and-bolts journey. It's a lyrical, visionary book, charting a bold course through the climate emergency, to a world of care, maintenance, comfort and abundance.

If you'd like an essay-formatted version of this post to read or share, here's a link to it on pluralistic.net, my surveillance-free, ad-free, tracker-free blog:

https://pluralistic.net/2023/10/17/care-work/#charismatic-megaprojects

My next novel is The Lost Cause, a hopeful novel of the climate emergency. Amazon won't sell the audiobook, so I made my own and I'm pre-selling it on Kickstarter!

[speakofthedebbie]

you (read: i) asked so you shall recieve: radioapple fic recs august 2024 update!!

the following are the ones from the last post w/some minor changes (think: misspellings and even more osas praising) (sorry for the re-tags!!):

Bedtime Rituals to Try out Before the Next Angelic War by @miribalis

just yes. thousand times yes. so basically my boy luci has some sleep troubles and that somehow leads to a qpr with al look its been a while ok just read it

Managerial Liberties by the same fella

these two tags explain it pretty well

something that sticks out to me about this is that charlie is actually (reasonably) cold to adam and like. im actually surprised with how little ive seen that. i mean i dont think id be exactly buddy-buddy with my besties killer either. only 4 chaps as of writing but already looking to be a radioapple classic. has the same vibe as bedtime rituals, but it is NOT a sequel

devils don't fly (don't expect me not to fall) by @corgiss

also just yes. basically a really not cool joke evolves into a blossoming romance because why wouldnt it. (man if i had a nickel for every radioapple fic that had a masquerade that was sabotaged by the vees- *gets shot bc i cant mention osas yet*)

i’ll hold you close (i’ll stay the course) by the same fella

the entire time i was just going "yas king! put that egotistical flatscreen in his place!!". basically luci reminds the overlords who he is and vox shows he can be more of a threat than he lets on.

ykw fuck it just the entire series (i didnt mention i would give anything to not give a shit (but i do) and my perfect rock bottom (my beautiful trauma) because the first one sounded a lil too angsty and ive gotten enough of that from other sources [pointedly glares at Quietly, It Slips Through Your Fingers, Love {also coming up later!}] and the second is (mostly) smut

Of Saints and Sinners by the forever amazing @morningstarwrites!! (if you see this i have a serious question: is this your first time ever writing a fic? because how do you get so much right the first time- [not even beginners luck could explain this level of skill])

if youre even half the radioapple fanatic i am and havent read this, literally what are you doing?? i could sing its praises until my death bed but ill hold off so i can explain whats happening. basically after burning down a meeting room several times, luci and al make a deal ("not a deal!", luci laments to the void): they will attempt to be civil and maybe even friendly, with some daily compliments sprinkled along the way, and by the end luci will owe al a favour. whats the favour? read it yourself dammit! seriously, 10/10, i foam at the mouth every friday

Quietly, It Slips Through Your Fingers, Love by Starlit_Rainfall (no tumblr in sight, so AO3) (i. urgfgh. what happened. i was just smiling over the fluff while crossing to go to school. where did it go. where did it gooooo)

if thats anything to go by, the last few chapters have been rough. the fluff feels so far away that i cant even explain what happens. luci was waxing poetic about swimming in maple syrup for al, i remember that much. lilith is particularly an asshole even tho we havent seen her yet (or maybe we have. idr, mightve chatted with al) also emily is there (fallen) and has a lil smth to do with als and liliths deal. if you read it, warning for the gut punch of angst that starts chap 32 "She/Her" (though the chapter before that, "Should Alastor Know By Now?" ends pretty rough too)

Freely We Serve by @romanaxe

i dont remember how i managed to stumble upon this but im having a great time. basically alastor is a new sinner fresh in hell (but time doesnt matter and the whole cast is still here) and thinks "what better way to gain power than be the personal assistant of the heartbroken king of hell!" features a 6-7 (rosies words) year old charlie and a morally dubious lilith (also i loved eepy al X3)

A Family Forged in Hellfire by Green_Ghostwriter (once again, no Tumblr, so AO3)

this ones a bit newer (10 chaps), is so far mostly exposition and the slowburn pot hasnt even been put on the stove, but as just a hazbin fic in general i see the potential. basically its a 1920s(30s?) au where heaven decides little charlie doesnt deserve to be raised in hell and is sent to earth with a "foster" family where her actions in life will determine witch realm she will return to after death. her "parents", al and mimzy, are given false memories so they can claim the girl as their own and gee i wasnt kidding when i said it was a lot of exposition. erm honestly explaining anymore would tech be spoiling so go read it!!

The Red Thread That Binds Us by @scun-gilli

{{future me prefacing this by saying i have no idea where i was going with yesterdays thought process, all you need to know from it was im on chapter 27. also scungilli your comment is making me very worried 😟 well theres no mcd tag so im sure itll fine, right? RIGHT, SCUNGILLI??}}

basically its a king x kings guard au where al and luci grow up together and only grow closer after a. certain life event for al (its fine guys trust :)) [she said, like a liar]) then al is sent off for royal guard training school (ik its not called that i forgor 😭) but dw he comes back. just watch out for graphic depictions of injuries (i think thats this fic) angst and a sneaky eve bc radioapple fics are allergic to happiness (or maybe im not looking hard enough lol) (also im really tempted to make the friendship bracelets they had 👀)

somewhere down the line by kj_crwm (AO3 link)

this one starts off as human!alastor/lucifer but by the middle(?) its just regular radioapple. basically al is encountered by luci while finishing off a job who agrees to keep quiet. luci just keeps on showing up, reveals hes the devil to which al us just like "lol ok" and eventually they get in a relationship (ooh lala 👀) but they break up after saying some hurtful things to each other (oh nono 👀) with luci promising al they will never cross paths again. if you watched the show then well. you know that doesnt happen 😂 most human!al radioapple have al summon him (no hate to them) so this was an interesting change of pace

new recs below!! ↓↓

Alastor and Lucifer do whatever the Hell this is (series) by Vagabond_Sloth (personally asked, no Tumblr, but they might make one 👀)

i know this is radioapple fic rec post but... *cough* Husk and Angel do a Romance for some soft huskerdust *cough* anyway- basically, a perplexing flower arrangement leads to a blossoming something between the resident radio demon and king of hell. seriously, its some good shit, and the author is really nice!

A Compliment A Day by @decembercamiecherries

spinning this around in my head at all times

basically, a classic "charlie makes al and luci compliment each other as a bonding excessive" but it does not disappoint (check out her other three radioapple fics too)

a lovely night (lalaland is that you??) and pancakes, small talk by @mirotic_chess (X Twitter account)

in a lovely night they do a lil dancey dancey and in pancakes, small talk luci makes some pancakes!!

Sin and Sentiment and Time On My Hands by demon_fawn (supposed Tumblr leads to a dead end)

oh my god future debs here and i am so fucking tired of doing these descriptions but. um. the plot for sin and sentiment def seems very interesting and time on my hands is an incomplete (but good!) attempt at radioapple week. hmm not sure if they still post bc the most recent update was july 12th

honestly just every radioapple fic by @otoshigo (i think ive read all but Forbidden Fruit of the Poisonous Tree)

if you look underneath the little island that is radioapple, on god otoshigo is one of the creators holding it up. all 19 (yes, 19. we eatin good tonight [excluding forbidden fruit]) of their radioapple fics are fantastic, buuut if i had to recommend anything specific: A Guide to the Care and Maintenance of the King of Hell (fuck count furfur!) and The Devil's Trip to the Big Apple

not to continue the trend, but basically anything by @thief-of-eggs (even the singular huskerdust) but personal recommendations: Trust and Hair Pets and Let Me Be Your Shelter (sickfics 🔛🔝)

idk if youll catch me doing the descriptions for these anymore shit was exhausting

tagging time!!!! (i want to end it all)

[of-the-eventide]

He found them sitting alone atop the Congregation. It was the wee hours of the morning, the sun not even gracing the horizon with its first light and yet he knew they would be awake. Sleep would not come to them after the events of the Vault and it seems neither for him. He did not hide his steps, not hiding his deafening clinks of armor as he let his hand pull out the chair beside them. They did not remove the tight white grip they had upon their hair, didn't move their tear-stained checks towards him as he took a seat upon their right, and they did not breathe in his direction as he faced his eyes towards them. It was a standoff then. Ito did not move to face him, made no noise to acknowledge he was even there while Estinien made no move to speak platitudes. What was there to say that was not already given? To this grief that marked this stoic and proud warrior so plainly? Nothing spoken could bandage this bleeding heart. Nothing said could bring him back. So he simply let out his hand between them. An offer. A kindness of touch he is sure no one has yet offered them but the young boy under their care. A reminder that he is here, no matter the path. They fit their small hand in his with nary a word, their grip tight enough to make his armor groan in protest but he held them gently as they broke and broke upon the early morning sun.

auraugust 2024 - standoff

[femmefatalevibe]

Tips on how to look like an heiress?? Thank you!

Style:

Embrace classic silhouettes and elevated wardrobe staples in high-quality fabrics and some unique patterns that suit your personal style

Focus on tailored sundresses, midi dresses, and slip dresses for day-to-night looks for the warmer months and eveningwear

Wear trendy denim with cami tops or sweaters in classic cuts, fun bright colors and patterns that suit your personal style

Invest in structured handbags and classic footwear (heels, boots, sandals, sneakers, etc.)

Mixed refined, elevated jewelry with fun costume pieces

Experiment with colors, textures, and whimsical accessories for special events or eveningwear (or go the opposite direction with a classic, ultra-luxurious monotone and streamlined dress and elegant accessories like diamonds and pearls)

Show skin strategically: If you decide on a sleeveless top/dress, one with cutouts, or a low neckline, pair it with pants or a longer-length skirt. Cover your shoulders, arms, or chest if you choose a mini-length skirt, dress, or shorts

Beauty:

Focus on maintaining shiny & sleek hair (and brows in a matching hue)

Place an emphasis on glowy, even skin with subtle blush or highlight, defined brows, and mascara with either a natural brown eye or a lip shade in a neutral pigment that "pops"

For evening events or special occasions, either pair a smoky eye with a natural lip or a bold lip with either a brown/neutral eye or bold liner with rosy cheeks

Maintain clean, classic-looking nails in a timeless shape and color

[uni-vee]

[LN] Anniversary Update and News

Patch notes after our maintenance. There will be tons of new things coming for anniversary (spoiler: no new Starry Corridor format)

Tips for Guiding Star: Explains the format of the event!

Battle pass: Basically, there is a free and paid tier for rewards. As you pull in the event, you’ll get the avatar frame, background, profile picture, etc at certain tiers. Spend $2.99 USD to unlock a special tier, where you get pieces of the suit as you pull. So it’s recharge but you also have to spend diamonds to get it.

Free background: The ‘Desert Mirage’ background will be given for free after reading through the event story.

New Wish Court: ‘Cozy Inn’ will debut after the update. Draw in the court to receive furniture; complete the pavilion set to get a chibi.

(okay this is where they would announce diamond postcards but they haven’t?? Hope there is another post coming with anniversary stuff because this is the biggest nothing burger I’ve ever eaten)

[the1975attheirverybest]

About

Halla. she/her. 29. USA.

Main blog is @puffpasstea (no longer active, but i use it to follow).

Blog Guide

Masterlist

Minors DNI

Swifties DNI

emoji anon list

I will not respond to, or post, asks that include: paparazzi content, negative comments on someone's body, negative comments concerning Matty's addiction, "leaked" album track-lists, or any kind of information released about the boys' work without their consent.

Requests are currently OPEN.

Palestine Resources

Listen to our 1975 podcast!

[baeshijima]

FUCK HELLO I DIDNT REALISE WE WERE ALREADY IN MAINTENANCE SO UHM

MAY ALL BLACK SWAN WANTERS BE BLACK SWAN HAVERS !!!

MAY ALL IMBIBITOR LUNAE WANTERS BE IMBIBITOR LUNAE HAVERS !!!

MAY ALL MISHA WANTERS BE MISHA HAVERS !!!

MAY ALL SPARKLE WANTERS BE SPARKLE HAVERS !!!

MAY ALL JING YUAN WANTERS BE JING YUAN HAVERS !!!

HAPPY 2.0 AND WELCOME TO PENACONY EVERYONE <333

[ikkaku-of-heart]

💛 The vampire ball brainrot is so strong that I legit had a dream last night about vampire Mihawk deciding that Zoro's not getting strong enough to defeat him fast enough and he's getting impatient. So he wrecked the little cottage he and Ikkaku built together and kidnapped her as motivation for Zoro to defeat him, and he actually ends up biting Ikkaku in front of him to make it clear he's serious.

This stupid dream has been burned into my mind since I woke up and will not leave me alone! I don't know what's up with my brain lately but I just need to scream at someone about this.

[fitlifefuel]

How to Free Up Space on Windows 10: A Comprehensive Guide

As your Windows 10 system accumulates more files and applications, it can start to slow down and become less efficient. Freeing up space not only improves your system’s performance but also extends its lifespan. In this guide, we’ll explore various methods to free up space on Windows 10, going beyond the basics to ensure you have a well-optimized system.

Table of Contents

Introduction

Understanding Disk Space Usage

Utilizing Built-in Windows Tools

Disk Cleanup

Storage Sense

Uninstalling Unnecessary Applications

Managing Temporary and Cached Files

Cleaning Up System Files

Windows Update Cleanup

System Restore and Shadow Copies

Using Third-Party Disk Cleaners

Handling Large Files and Folders

Moving Data to External Storage

Using Cloud Storage Solutions

Conclusion

1. Introduction

As modern software and files grow larger, managing disk space effectively becomes crucial. This guide offers practical steps and tips to reclaim disk space on your Windows 10 computer, ensuring it runs smoothly and efficiently.

2. Understanding Disk Space Usage

Before freeing up space, it’s essential to understand how your disk space is being used. Navigate to Settings > System > Storage to view a detailed breakdown. This will help identify which areas need attention.

3. Utilizing Built-in Windows Tools

Disk Cleanup

Windows 10 features a built-in Disk Cleanup tool designed to delete unnecessary files. To access it:

Type “Disk Cleanup” in the search bar and select the app.

Choose the drive you want to clean.

Select the file types to delete (e.g., temporary files, system cache).

Storage Sense

Storage Sense automates disk cleanup. To enable it:

Go to Settings > System > Storage.

Toggle on Storage Sense and configure settings to regularly delete temporary files.

4. Uninstalling Unnecessary Applications

Unused applications take up significant space. To uninstall them:

Go to Settings > Apps > Apps & features.

Review the list and uninstall non-essential programs.

5. Managing Temporary and Cached Files

Temporary files can quickly accumulate and consume disk space. Use Disk Cleanup or third-party tools to regularly clear these files. Browsers also store cached data, which can be cleared from the browser settings.

6. Cleaning Up System Files

Windows Update Cleanup

Old update files can take up substantial space. Disk Cleanup includes an option to remove these:

Open Disk Cleanup and select Clean up system files.

Choose Windows Update Cleanup.

System Restore and Shadow Copies

System Restore points and shadow copies can consume significant disk space. Manage these by:

Typing “System Protection” in the search bar.

Selecting the drive and clicking Configure.

Adjusting the Max Usage slider to limit space usage.

7. Using Third-Party Disk Cleaners

Third-party tools like CCleaner provide more comprehensive cleaning options. They can remove junk files, clean registries, and manage startup programs to free up space.

8. Handling Large Files and Folders

Identifying and managing large files is crucial. Use tools like WinDirStat to find large files and folders. Consider moving non-essential large files to external storage.

9. Moving Data to External Storage

Free up space by moving data such as videos, photos, and documents to external hard drives or USB sticks. Ensure you regularly back up important data to avoid loss.

10. Using Cloud Storage Solutions

Cloud storage services like OneDrive, Google Drive, and Dropbox offer substantial space. Move infrequently accessed files to the cloud to save local disk space.

11. Conclusion

Regular maintenance and mindful storage practices can keep your Windows 10 system running efficiently. Use the tips and tools outlined in this guide to manage and optimize your disk space effectively.

External Authoritative Sources

Microsoft Support: Free up drive space in Windows

CCleaner Official Website

How-To Geek: The Ultimate Guide to Freeing Up Space on Your Windows PC

By following these detailed steps, you can efficiently manage and optimize your disk space on Windows 10, ensuring your system remains fast and reliable.

[houghtalingelectrical01]

The Ultimate Guide to Troy Electrical Maintenance Ensuring Safety and Efficiency

Electrical systems are the backbone of modern infrastructure, powering homes, businesses, and industries. In Troy, ensuring that these systems are maintained properly is crucial for safety, efficiency, and reliability. Troy electrical maintenance encompasses a wide range of services, from routine inspections and repairs to comprehensive upgrades and emergency services. This guide will delve into the importance of electrical maintenance, common services offered, and tips for choosing the right professionals for the job.

The Importance of Electrical Maintenance

Electrical maintenance is essential for several reasons:

Safety: Faulty wiring and electrical systems are leading causes of fires and electrical shocks. Regular maintenance helps identify and fix potential hazards before they become serious issues.

Efficiency: Well-maintained electrical systems operate more efficiently, reducing energy consumption and lowering utility bills.

Reliability: Regular maintenance prevents unexpected breakdowns and ensures that electrical systems function smoothly.

Compliance: Adhering to local building codes and safety regulations is mandatory. Proper electrical maintenance ensures compliance and avoids legal issues.

Longevity: Routine maintenance extends the lifespan of electrical systems and appliances, protecting your investment.

Common Electrical Maintenance Services

Troy electrical maintenance services cover a broad spectrum of tasks. Here are some of the most common services provided:

1. Routine Inspections

Regular inspections are vital for identifying potential issues early. Professional electricians check for signs of wear and tear, loose connections, and other problems that could lead to malfunctions or safety hazards.

2. Electrical Repairs

From minor fixes like replacing a faulty outlet to major repairs such as rewiring an entire building, electrical repair services address any issues found during inspections or that arise unexpectedly.

3. Upgrades and Installations

Upgrading electrical systems to accommodate new appliances or meet increased power demands is a common service. This includes installing new circuits, outlets, and energy-efficient lighting systems.

4. Preventative Maintenance

Preventative maintenance involves routine tasks such as cleaning electrical panels, tightening connections, and testing circuit breakers to ensure everything is in optimal condition.

5. Emergency Services

Electrical emergencies, such as power outages or electrical fires, require immediate attention. Emergency electrical services are available 24/7 to address urgent issues promptly.

6. Energy Audits

Energy audits help identify areas where you can improve energy efficiency. Electricians assess your current usage and recommend upgrades to reduce energy consumption and costs.

Key Components of Electrical Maintenance

Understanding the key components of electrical maintenance can help you appreciate the scope of services and the expertise required. Here are some critical areas of focus:

1. Electrical Panels

Electrical panels distribute power throughout your building. Regular maintenance involves inspecting for corrosion, ensuring connections are secure, and replacing outdated panels to handle modern power demands.

2. Wiring

Over time, wiring can degrade or become damaged. Inspecting wiring for signs of wear, fraying, or damage prevents electrical hazards. Upgrading old wiring to modern standards is also crucial.

3. Circuit Breakers

Circuit breakers protect electrical circuits from overload. Regular testing ensures they function correctly, and replacing faulty breakers prevents potential electrical fires.

4. Outlets and Switches

Outlets and switches are often subject to wear and tear. Ensuring they are in good condition and upgrading to modern, safer designs can prevent electrical issues.

5. Lighting Systems

Maintaining and upgrading lighting systems improves energy efficiency and safety. This includes replacing old bulbs with LEDs, fixing flickering lights, and ensuring proper illumination in all areas.

Choosing the Right Electrical Maintenance Provider in Troy

Selecting a reliable and skilled electrical maintenance provider is crucial for ensuring high-quality service. Here are some tips to help you choose the right professionals in Troy:

1. Credentials and Licensing

Ensure that the electricians are licensed and certified to perform electrical work. This guarantees they have the necessary training and adhere to industry standards.

2. Experience and Expertise

Choose a provider with extensive experience in electrical maintenance. Experienced electricians are better equipped to handle complex issues and provide reliable solutions.

3. Reputation and Reviews

Check online reviews and ask for references to gauge the reputation of the electrical maintenance provider. Positive feedback from previous clients is a good indicator of quality service.

4. Range of Services

Select a provider that offers a comprehensive range of services, from routine inspections to emergency repairs. This ensures you have a single point of contact for all your electrical maintenance needs.

5. Customer Service

Good customer service is essential for a smooth and satisfactory experience. Choose a provider that is responsive, communicates clearly, and prioritizes customer satisfaction.

The Role of Preventative Maintenance

Preventative maintenance is a proactive approach to electrical maintenance that can save you time, money, and hassle in the long run. Here’s why it’s important:

1. Early Detection of Issues

Regular maintenance helps identify potential problems before they become major issues. This allows for timely repairs and prevents costly damage.

2. Cost Savings

By preventing major breakdowns and improving energy efficiency, preventative maintenance can lead to significant cost savings on repairs and utility bills.

3. Improved Safety

Routine checks and maintenance reduce the risk of electrical fires, shocks, and other hazards, ensuring a safer environment for occupants.

Troy electrical maintenance is an essential service for ensuring the safety, efficiency, and reliability of electrical systems. From routine inspections and repairs to emergency services and energy audits, a comprehensive approach to electrical maintenance can prevent potential hazards and extend the lifespan of your electrical infrastructure.

Choosing the right electrical maintenance provider in Troy involves considering credentials, experience, reputation, and customer service. By prioritizing preventative maintenance and addressing issues early, you can enjoy a safer, more efficient, and more reliable electrical system in your home or business.

Regular maintenance not only protects your investment but also contributes to a safer living and working environment. Whether you’re a homeowner, business owner, or property manager, investing in quality electrical maintenance is a smart and essential decision.

[ace-sailor-uranus]

but what if i WANNA sit like a shrimp :C

[remedialcare]

A Perfect Guide for Quicker Nail Growth

Nails can also be an indicator of general health and wellbeing. Strong, long nails are an indication of health and nutrition. Nonetheless, many people may find it difficult to grow and strengthen their nails to the proper length. We'll examine the nuances of nail development in this in-depth article, along with helpful tips on how to efficiently speed up this process.

Knowing About Nail Development

Understanding the fundamentals of nail biology is crucial before exploring techniques for accelerating nail development. The nail matrix, which is found underneath the cuticle, is where nails, which are made of a protein called keratin, grow. Individual differences in growth rate are caused by a variety of factors, including age, genetics, and general health.

Three phases make up the nail growth cycle: the rest phase (telogen), the transition phase (catagen), and the growth phase (anagen). It is essential to comprehend this cycle in order to put tactics in place that maximize nail development.

Ways to Encourage the Growth of Nails

Keep a Balanced Diet: For healthy and growing nails, make sure you're getting enough of these important nutrients: biotin, protein, vitamins A, C, and E. Include items like leafy greens, salmon, almonds, and eggs in your diet. Hydration and Moisture: To keep your nails from becoming dry and brittle, drink lots of water and use moisturizing lotions.

Establish a regular nail care regimen that consists of hydrating, filing gently, and avoiding harsh chemicals, such as those contained in nail paint removers.

Steer Clear of Harsh Chemicals: Acetone and formaldehyde are two examples of harsh chemicals that should be avoided as they can weaken and destroy nails.

Wear gloves when performing home tasks or participating in activities that could subject nails to chemicals or trauma to prevent damage to them.

Think About Supplements: To boost nail development and strength, speak with a healthcare provider about combining supplements like collagen or biotin.

You Can Also Try This Product: ProNail Complex

How to Grow Nails More Quickly at Home

Nail Strengthening Treatments: To encourage nail growth and strength, try natural therapies like soaking nails in olive oil or dabbing on a mixture of honey and lemon juice.

DIY Nail Masks: Known for their nourishing qualities, avocado, banana, and yogurt are excellent items to use to make homemade nail masks. Essential Oil Treatments: To strengthen and hydrate nails while also encouraging growth, apply essential oils such as jojoba, lavender, or tea tree oil.

Expert Interventions for Nail Development Consider expert treatments offered at salons, such as vitamin and mineral-enriched nail growth serums and strengthening treatments for nails, if you're looking for more instant results. Common Myths About Nail Growth Dispelled Regular Nail cutting Encourages development: Despite common assumption, regular cutting has no direct impact on nail development. On the other hand, routine care keeps nails from breaking and encourages general health.

Growth is Hindered by Gel and Acrylic Nails: Although incorrect application or removal of artificial nails can harm natural nails, well-maintained and applied extensions can offer defense and promote normal growth. Nail Hardeners Encourage Growth: Although they could momentarily strengthen nails, nail hardeners do not actively encourage growth. Prolonged use might also cause brittleness and excessive dryness.

You Can Also Try This Product: ProNail Complex

Maintaining Nail Health To preserve the health of your nails, use appropriate procedures for shaping and trimming them, keep your nails clean to stop germs from growing in them, and give up bad behaviors like picking and biting your nails that can harm them. Identifying Problems with Nail Growth Watch out for symptoms like discoloration, ridges, or alterations in shape that could indicate underlying health problems that need to be addressed. These signals of sluggish nail growth should also be taken seriously.

When to Get Expert Assistance For an accurate diagnosis and course of therapy, speak with a dermatologist or other healthcare professional if you have significant abnormalities or persistent problems with nail development.

You Can Also Try This Product: ProNail Complex

Conclusion: It takes perseverance, consistency, and a comprehensive strategy that includes healthy eating, staying hydrated, and taking care of your nails to get faster nail development. You can cultivate strong, healthy nails that represent your general well-being by putting the techniques mentioned in this article into practice and dispelling frequent misconceptions. Recall that achieving ideal nail development requires perseverance and commitment.

DISCLAIMER:

There is an affiliate link of a Best Product in this article which may make me some profit.