#kilz paint colors

[ncspaint]

Top Shower Waterproof Paint

The most straightforward option for shower walls is to paint them with long-lasting, bathroom-safe paint. Waterproof paint for shower tiles, latex enamel, oil-based enamel, and specialty bathroom paint are all options for use in bathrooms. Most bathroom paints for tiles or walls are semi-gloss, and the glossier they are, the more water-resistant and easy to clean they are.

If you want painted shower walls, you can choose from a variety of colors. A wide range of colors is available, just like with non-waterproof paints. To maintain water resistance over time, painted walls require more attention and maintenance than other options. A solid backing is required for any waterproof bathroom paint.

You can find the best waterproof paint for shower walls in our reviews to prevent leaks when you least expect them. (Learn More About Enamel Paint)

Why Do You Need Waterproof Paint For Showers?

Because bathrooms are damp, moisture should be your primary concern when painting your walls. Moisture has two effects on the walls of your bathroom. Damp air accumulates on the walls as a result of steamy baths and showers. There’s also water splashed on the walls from the tub or sink. Moisture can damage the paint if it penetrates the paint layer and comes into contact with the drywall or plaster beneath.

This can result in paint peeling and mold growth. Moisture cannot penetrate the paint layer if it is permeable. Even before mildew-resistant paints were introduced, the most common way of dealing with bathroom moisture was to use high-gloss paints. The higher the gloss, the better the paint finish performs in toilets. In older bathrooms, high-gloss finishes on all surfaces are popular. While high-gloss paints do not prevent mildew, they make cleaning up those drippy, brown stains that are common in bathrooms a breeze. (Read more about Enamel vs Acrylic Paint.)

Several interior house products are abandoning the bathroom paint name in favor of creating paints to combat moisture. Interior Acrylic Latex Paint, like Bath Paint, is antimicrobial and can be used on trim, walls, and ceilings. In a wet setting, a flat finish is porous and absorbs moisture, whereas a glossy finish causes water to bead and runoff.

Waterproof bathroom paint is more expensive than other interior paints, but it is possible to find high-quality paint that will last in the bathroom. Because bathrooms are small, the amount of thick sealed paint required is usually less than that required in a standard room. If a low-sheen finish is not required in your bathroom, a good-quality satin, semi-gloss, or high-gloss regular paint with antimicrobial additives is washable. It has a steam and moisture-resistant finish, so that should be enough.

Reviews of the Best Waterproof Paint

1. Liquid Rubber Foundation and Basement Sealant

Pros

-Apply with a roller brush or a high-quality piston paint sprayer. -Water-based, so no solvents or VOCs -It can be used both indoors and outdoors. -Non-flammable

Cons

-Can smell in a confined space -It cannot be used within 24 hours of the anticipated rain.

When it comes to the Liquid Rubber Foundation and Basement Sealant, you have a product that will completely keep shower liners, deck and fence posts, metal, wood, and concrete corners dry and protected.

The solution is highly flexible, resulting in a final membrane with high elasticity that will not crack or tar. You also get a generous flat surface coverage of 50 sq ft per gallon for each coat.

The Liquid Rubber Foundation Sealant is environmentally friendly and safe for children, pets, and the environment. It can be used both outdoors and indoors without the need for breathing apparatus, though it may have a slight lingering odor in small areas.

With a suggested retail price of around $110 for 5-gallons, read more …..

[ghostlyviolets33]

hi! im going to paint my room soon and i was wondering if you could find any cool paint colors? they dont necessarily need to look exactly like violets, just colors you think she would like/consider. im sorry if that was a lot!! thanks

Thanks for asking! No need to apologize, I love this question 💜🖤

Violet Harmon-inspired Paint Colors:

#1: Sherwin-Williams "Great Green"

#2: KILZ "Foggy Promenade"

#3: Benjamin Moore "Lavender Mist"

#4: Glidden "Dusty Mauve"

If you can't find these, or if these paints aren't available where you live, any sage green, light blue/muted blue, dusty lavender, and pink-ish purple or mauve colors should work the same.

Violet's wall color:

I’m a little conflicted about Violet's room color; in some pictures it looks like a muted light blue or periwinkle, and in other pictures it almost looks teal. Here’s some pictures of her walls:

Because these pictures were taken with the flash on, it makes me think that a dull blue is the genuine color of the room instead of teal.

I hope this was helpful :)

[renee-writer]

The Contractor Chapter 4 Moving In

AO3

His men grouse as they clean an area for, “her royal pain in the arse,” as Angus puts it.

 

“This is her house. We are just hired help. It will do you both good to remember that.” His stern glance meets theirs. They both squirm.

 

“Aye Jamie.” Rupert gathers the rubbish into a bag.

 

“As you say. She just needs to stay out of the way.” Angus gathers the broom and dust bin, carrying them out. Jamie exams the space. He is satisfied.

 

A clean wooden floor, smelling of wood shavings ( now removed). It shines under it’s new stain. The walls are likewise clean if bare. Stone covered in wood, painted over with a coat of Kilz to protect against mold. It will be painted when Claire decides on a color.

 

On a far wall, the ancient fireplace reigns. Old brick and stone, it is the centerpiece of the room. It was cleaned and tested, certified safe. All loose stones and bricks, re-secured. It is laid out in case she wishes a fire .

 

She arrives at noon after spending the morning with her son. She stops, staring wide eyed at the transformed room.

 

“The walls will be painted as you wish. Carpet or rugs laid according to your preference.” Jamie explains. He leans against the door frame, watching her take it in.

 

“This is excellent work Mr. ahh, Jamie. Maybe a few throw rugs but I love the wooden floors. As for wall color, I don’t know yet. Can I get back to you?” She turns to face him and he stands straight.

 

“Aye Sassanach.”

 

“I will just place a bed in here. Not even that, more a cot, so it is easily moved out of the way.”

 

He nods. “Whatever you wish.”

 

“I really will try to make it easy on you.”

 

Really try, he thinks. That isn’t a definite. Oh well, as he told the lads, this is her home. “We will be working upstairs and on the stairs themselves.”

 

“Thanks.”

 

“Do you need help with your cot, before I leave?”

 

“No, but I thank you.” He nods, half bows to her, before departing.

 

They soon hear her pulling it in. It seems she has it and they return to work.

[starshieldpaint]

Unveiling the Best UV Resistant Outdoor Paint: Protecting Your Surfaces from the Sun’s Wrath

Introduction: When it comes to outdoor painting projects, durability and longevity are paramount. Exposing your outdoor surfaces to the elements, especially the sun’s harmful UV rays, can cause premature fading, discoloration, and deterioration. However, with the right UV resistant outdoor paint, you can safeguard your surfaces and maintain their beauty for years to come. In this blog post, we’ll delve into the importance of UV resistance and explore the best UV resistant outdoor paints available on the market.

Understanding UV Resistance: UV resistance refers to a material’s ability to withstand the damaging effects of ultraviolet radiation from the sun. UV rays can break down the molecular structure of paints and coatings, leading to fading, chalking, and eventual failure. Outdoor surfaces such as fences, decks, siding, and furniture are particularly susceptible to UV damage, making UV resistant paint essential for their protection.

The Benefits of UV Resistant Outdoor Paint: Investing in UV resistant outdoor paint offers a myriad of benefits:

Longevity: UV resistant paints are formulated to withstand prolonged exposure to sunlight, ensuring that your surfaces maintain their vibrant colors and finish for years.

Fade Resistance: By blocking UV rays, these paints prevent color fading and maintain the aesthetic appeal of your outdoor spaces.

Protection: UV resistant paints act as a protective barrier, shielding surfaces from UV-induced damage, including cracking, peeling, and warping.

Cost Savings: By extending the lifespan of your painted surfaces, UV resistant paint helps you save money on maintenance and repainting costs in the long run.

Enhanced Performance: These paints often come with additional features such as weather resistance, mold and mildew resistance, and easy application, further enhancing their performance in outdoor environments.

The Best UV Resistant Outdoor Paints: When selecting the best UV resistant outdoor paint for your project, consider factors such as durability, color retention, ease of application, and compatibility with your surface material. Here are some top-rated options:

Behr Premium Plus Ultra Exterior Paint & Primer in One: Known for its exceptional durability and fade resistance, Behr Premium Plus Ultra is a popular choice for outdoor painting projects. Its advanced UV protection formula ensures long-lasting color retention and weather resistance.

Rust-Oleum Marine Topside Paint: Designed specifically for marine applications, Rust-Oleum Marine Topside Paint offers superior UV resistance and durability. Ideal for painting boats, docks, and other outdoor surfaces exposed to harsh sunlight and saltwater.

Sherwin-Williams SuperPaint Exterior Acrylic Latex Paint: Sherwin-Williams SuperPaint is renowned for its excellent adhesion, color retention, and UV resistance. Its advanced acrylic formula provides lasting protection against UV damage and weathering.

KILZ Exterior Siding, Fence, and Barn Paint: KILZ Exterior Paint is formulated to withstand the rigors of outdoor exposure, including UV radiation, moisture, and temperature fluctuations. Its durable acrylic-latex formula ensures long-lasting protection and beauty for your outdoor surfaces.

Benjamin Moore Aura Exterior Paint: Benjamin Moore Aura Exterior Paint offers exceptional durability and UV resistance, thanks to its proprietary Color Lock technology. It provides excellent coverage, fade resistance, and weather protection for various outdoor surfaces.

Conclusion: Protecting your outdoor surfaces from the sun’s harmful UV rays is essential for maintaining their beauty and integrity. By choosing the best UV resistant outdoor paint, you can ensure long-lasting color retention, durability, and protection against UV-induced damage. Whether you’re painting fences, decks, siding, or furniture, investing in UV resistant paint is a smart choice for preserving the longevity and aesthetic appeal of your outdoor spaces.

[homeimprovementway]

Can Kilz Be Tinted? Unveiling The Power Of Customization

Yes, Kilz can be tinted. Tinting is possible for Kilz primer and paint products, allowing you to customize the color to match your desired paint shade. Kilz, a popular brand, offers a wide range of high-quality primers and paints that can be tinted to achieve the perfect hue for your project. Tinting the Kilz products gives you the flexibility to match the primer or paint with the color of your choice, ensuring a seamless and professional finish. Whether you are painting walls, ceilings, or other surfaces, being able to tint Kilz products allows for greater customization and satisfaction with your final paint job. With this option, you can achieve the precise color match you desire, making your painting experience more efficient and effective.

Credit: www.create-enjoy.com

Why Customize Kilz?

Why Customize Kilz? Increased Versatility Tinting Kilz allows for increased versatility in its application. By customizing the color of Kilz primer, you can more easily coordinate with the color scheme of your space. Whether you're painting a bedroom, living room, or kitchen, customized Kilz can enhance the overall aesthetics of your room by providing a seamless transition between the primer and the topcoat. Matching Aesthetic Preferences When it comes to interior design, details matter. Customizing Kilz primer enables you to match the aesthetic preferences of your space. By tinting Kilz to complement or accentuate your wall color, you can create a cohesive and harmonious appearance. This personalized touch adds depth and richness to the overall ambiance of your room, making it more inviting and visually appealing. Matching the color of your primer to your desired topcoat color can also help you achieve a more accurate representation of the final paint color. This is particularly beneficial when working with bold or dark colors, as a tinted primer can help prevent color bleed-through and ensure the true color of your topcoat shines through. Moreover, using a custom-tinted Kilz primer can also aid in hiding previous paint colors or imperfections on your walls, saving you time and effort in preparing your surfaces. With a tailored primer shade, you can achieve a higher level of coverage and a flawless finish. Take control of your paint project by customizing Kilz primer to suit your specific needs. The increased versatility and ability to match aesthetic preferences make this option an ideal choice for anyone looking to elevate their interior design.

Credit: www.walmart.com

Understanding Kilz Tinting Options

Kilz offers a range of tinting options, allowing you to customize the color of your paint. With Kilz, you can easily match your desired shade and achieve the perfect look for your space. Kilz primers and paints are well-known for their high-quality performance and ability to provide a solid base for your paint projects. Tinting Kilz products can offer added versatility and customization to your projects, allowing you to achieve the perfect hue for your space. Here, we will delve into the options available for tinting Kilz primer and paint, and how it can enhance your painting experience. Tinting Kilz Primer When it comes to primer, tinting can be a game-changer, as it allows you to kickstart your project with the exact color you desire. Kilz offers the option to tint their primers to a wide range of colors, ensuring that you can achieve the perfect shade to complement your paint choice. Tinting the primer to a color close to the final paint shade can also reduce the number of coats needed for complete coverage, saving time and effort. Tinting Kilz Paint Tinting Kilz paint offers a world of possibilities for achieving your desired color palette. Kilz paint can be tinted to a range of colors, allowing you to personalize your space with precision. Whether you're looking for a soft pastel or a bold statement color, the option to tint Kilz paint ensures you can bring your vision to life with ease. With the right tint, Kilz paint can deliver a cohesive and professional finish to your painting projects. In conclusion, understanding the tinting options available for Kilz primer and paint can open up new creative opportunities for your painting projects. Whether you're seeking to achieve a specific color or streamline the painting process, the ability to tint Kilz products provides added versatility and customization.

Benefits Of Tinting Kilz

Tinting Kilz offers multiple benefits, allowing you to customize the color to match your desired aesthetic and blend it seamlessly with your overall design scheme. With the ability to tint Kilz, you can achieve a polished, cohesive look for your walls while still enjoying the superior performance and protection that Kilz provides. If you're familiar with Kilz, you may know that it is a popular primer and sealer used to prepare surfaces before painting. But did you know that Kilz can also be tinted? This simple addition to the product can offer a range of benefits that can make your painting experience even better. Let's delve into the advantages of tinting Kilz. Enhanced Coverage And Hiding Power Tinting Kilz enhances its coverage and hiding power, making it an excellent choice for a variety of projects. When Kilz is tinted to match the desired paint color, it effectively acts as a neutral base, providing a more solid foundation for the final paint layer. This leads to improved coverage, ensuring that the color you apply looks vibrant and true to its intended shade. Benefits of Enhanced Coverage and Hiding Power Provides a better base for paint application Helps minimize the number of paint coats needed Achieves a more uniform and professional finish Tinting Kilz allows it to effectively conceal imperfections and stains on the surface being painted. Whether you're dealing with water stains, smoke damage, or other blemishes, the tinted Kilz can help block them out, ensuring they don't affect the final paint job. This is particularly beneficial when working with dark or bold paint colors, as the enhanced coverage can prevent any underlying discoloration from showing through. Improved Color Accuracy An additional advantage of tinting Kilz is the improved color accuracy it offers. When you tint Kilz to match the final paint color, you can ensure a more precise color outcome. This is especially important when working with medium to deep paint shades that require a solid base to bring out their true beauty. Pairing a tinted Kilz primer with the right paint color helps guarantee that the final result matches your desired vision without any variations or surprises. Benefits of Improved Color Accuracy Eliminates any variations or surprises in the final paint color Ensures the full depth and richness of the chosen paint shade Enhances color consistency throughout the painted surface By tinting Kilz, you can achieve enhanced coverage, hiding power, and improved color accuracy. This means your finished paint job will look more professional and aesthetically pleasing. Whether you're renovating your home or starting a new project, consider the benefits of tinting Kilz to elevate your painting experience.

Credit: www.kilz.com

How To Tint Kilz

Are you wondering if Kilz can be tinted? The good news is, yes, it can! Tinting Kilz allows you to achieve the desired color for your painting project while still enjoying the benefits of superior primer coverage. In this guide, we will walk you through the process of tinting Kilz, from choosing the right tint to the tinting process itself. Let's get started! Choosing The Right Tint When it comes to choosing the right tint for your Kilz, it's important to consider the final color you want to achieve. Kilz offers a wide range of tint options, allowing you to customize the primer to match or complement your paint color choice. Whether you're looking to lighten or darken the color, Kilz tint options can help you achieve your desired result. Here's how you can choose the right tint for your Kilz: - Identify your paint color: Start by determining the color you will be using for your actual paint. Having this information will help you select the right tint. - Refer to the color chart: Kilz provides a color chart that displays the available tint options. This chart allows you to visually assess which tint would best complement your paint color. - Test the tint: To ensure the tint matches your paint color, consider testing it on a small area before fully tinting the Kilz. This step can help you avoid any surprises or mismatched colors. Tinting Process Now that you have selected the tint for your Kilz, let's go through the process of tinting it: - Gather your supplies: Make sure you have all the necessary supplies, including the Kilz primer and the selected tint. - Mix the tint: Typically, the tint is available in a concentrated form. Follow the manufacturer's instructions to mix the tint with the Kilz primer. Ensure thorough mixing to evenly distribute the tint. - Stir well: Use a stir stick to stir the Kilz and tint mixture. Make sure there are no streaks or clumps in the mixture. - Test the color: Before applying the tinted Kilz to your project, it's always a good idea to test the color on a small area. This step allows you to confirm that the tint has been properly mixed and that it matches your desired color. - Apply the tinted Kilz: Once you are satisfied with the tinted color, you can now apply it to your project. Use a brush or roller to evenly coat the surface, ensuring complete coverage. - Allow drying time: Follow the manufacturer's instructions for drying time. Once the tinted Kilz has dried, you can proceed with your paint application as usual. And there you have it! Now you know how to tint Kilz and achieve the perfect color for your project. Tinting Kilz gives you the flexibility to create a customized primer that meets your specific needs. So go ahead and experiment with different tints to achieve the desired look for your painting project!

Tips For Successful Kilz Tinting

Tinting Kilz primer can be a great way to achieve a more customized and appealing look for your project. However, successful tinting requires careful consideration and execution. Here are some tips for successfully tinting Kilz. Testing And Adjusting Color Before tinting a large batch of Kilz primer, it's essential to test the color to ensure it meets your expectations. Start by tinting a small amount of Kilz with the desired color and applying it to a test area. Allow it to dry completely and assess the color in various lighting conditions. If the color needs adjustments, you can add more tint or adjust the base color until it matches your desired shade. Working With Multiple Coats When applying a tinted Kilz primer, it's important to consider whether multiple coats will be necessary to achieve the desired coverage and color intensity. If you anticipate needing multiple coats, be sure to allow sufficient drying time between each application. Additionally, ensure that each coat is applied evenly to avoid streaks or uneven color distribution.

Frequently Asked Questions On Can Kilz Be Tinted

Is It Possible To Tint Primer? Yes, it is possible to tint primer. Tinting primer can help create a better color base for the final coat. It is advisable to consult with a professional for the right tint and ratio. Does Kilz Come In Colors? Yes, Kilz is available in a variety of colors. Kilz offers a wide range of paint options to suit your needs. Can You Add Color To White Primer? Yes, you can add color to white primer. Simply mix the desired color pigment into the primer until it reaches the desired shade. This allows you to have a customized color for your primer to match your paint application. Can You Tint Kilz Drywall Primer? Yes, Kilz drywall primer can be tinted to the desired color. Tinting the primer will help achieve better coverage for the topcoat.

Conclusion

Tinting Kilz primer is a popular and effective way to personalize and enhance the look of your walls. Not only does it provide a more customized finish, but it also offers added benefits like improved hide and coverage. So, if you're looking to transform your space with a touch of color, tinting your Kilz primer is definitely worth considering. Read the full article

[benonirosehouse]

Kitchen Closet Part Two: Big Plans for a Little Space

(If you haven't read Part One, start here) Remember how terrifying the under-the-stairs-closet aka Kitchen Cave was looking in our last installment? It's looking much less horrifying. But it's not ready yet, because just when I am about to kinda half-ass something, J abandons her sensible nature and decides we need a beautiful closet, not just a functional one.

It's also not ready yet because we both work full time and have lives. Our mistake!

But in between working and living and beginning to totally restore the upstairs bathroom, we have had time to get somewhere with the closet. The exposed stairs had been half painted white and were stained, grimy, and very gross. We've primed them with Kilz and caulked them, and also primed the plywood floor as well. (You may be wondering why the floor is plywood. I looked in the cellar to see if the original floor was there, and it's not. It looks like there was a staircase down to the cellar at one point that was removed. That also seems to have something to do with the "temporary" support columns down there. We'll add it to the "ask a structural engineer" list.) Enjoy a little Before & After of our progress!

The door frame was (is) in horrible shape, and had been painted white over cream around the fridge, so some of it was... still cream. Thankfully, I have some white trim paint hanging around just because. I never thought I'd be so excited to hit something in my own home with the landlord special, but that's what the door frame got! The impact that white paint has had cannot possibly be overstated. Someday we'll actually fix the door frame, but that day is not today.

There was a shelf above the fridge when it was in the closet, and that shelf is made of the same plywood the floor is. There's a bit of space at the back of the closet that needs covering to even it all out for some laminate, and thankfully we have a free plywood scrap that fits the bill! Yeah, I said laminate. It's awful, I know. But it's a closet! And it's plywood! And we have so many visible parts of the house to spend money on beautifying. It just didn't seem worth even another dollar per square foot to use bamboo. I hopped on FB marketplace and found someone's insanely cheap (and low quality, but whatever) leftover stick-on vinyl planks in a decent color, and we're going to slap that straight on the plywood. J grimaced about it but agreed. There's a lot of shit to fix in this house, we may as well save where we can. Of course the plaster is cracked and in some places crumbling. I ordered a "homeowners" Plaster Magic kit and that's the next step in this journey. These walls were only ever hit with one light lime wash, so no paint stripping required to fix and then lime paint the walls. I thought we were going to paint the walls some version of white, put a cheap light in there, and call it a closet. However, after what felt like an hour of deliberation in the lighting section at Home Depot, we decided to go online instead and buy an attractive light fixture instead of a more utilitarian option. J, it turns out, wants a pretty closet, given that we'll be looking inside it every day. I was surprised, but happy to oblige. While we were shopping on the internet, we ordered rod brackets so we can hang our coats, and a tension rod. Someday we'll have closet door to match the other (seven!) doors in the space, but in the meantime, a curtain's going to have to serve.

Since we decided to make the space a bit nicer, we picked a cute blush color for the walls, Native from Color Atelier.

Looking forward to learning about plaster repair! Will post about it next time :)

[peteyoungsrealestatetraining]

Common Mistakes To Avoid When Rehabbing A Home

Beginners and seasoned investors alike are prone to making mistakes. Most mistakes can be easily avoided by just listening to people talking at your local REIA group or meet up sessions.

Some mistakes are minor and have little impact on the end result of selling or renting your property when others can become nightmares. This will not be the only portion I write on mistake but this one I am sure will affect everyone somehow.

One of the most guaranteed things you will have to do in your own house or investment property is painting. If you do it yourself or hire it out, you MUST know and follow this advice. You can not paint latex paint over oil-based paint anytime. It will peel and flake badly within about 3 to six months. Also, the paint will easily chip and scrape off as latex paint does not adhere to oil-based paint. You can however paint latex paint over an oil-based primer. I always use oil-based primer and sealer in one, such as KILZ or ZINZER. This will prime, seal in any stains and can be painted over with any latex paint. 

To know what type of paint you are painting over, there are a few ways to test the surfaces and paint over it correctly. You all may have heard of Goof Off, a canned liquid whose claim is that it removes dried latex paint. This costs about $5 in hardware stores for about 4 ounces. Squirt this on a white rag and lightly scrub an area on walls, trim, windows, doors and gutters or whatever you are going to paint. If it melts the paint on to the rag, its latex paint and you can easily just paint over it with latex, no problem. If all it does is clean the surface and no paint melts onto the rag, it is oil-based paint and must be painted with oil again. 

There is another way to avoid having to paint the oil-based paint. If you use an oil-based primer/sealer (KILZ) to prime the previously painted surfaces, you can paint latex on top of the oil-based primer and from here to eternity you can just paint latex on you house. That is how you change an oil painted house to being the easier latex painted house forever. You may also use XYLENE or DENATURED ALCOHOL instead of Goof Off. This will insure that your painted surfaces resist peeling away.

Another mistake is how do it yourselfers and painters paint cabinets and paneling in properties. The finished product can show runs, drips and brush marks making the job look shotty. To paint any stained surface, first wipe it down with white vinegar in full strength with a sponge or cloth. This will remove grease from cabinets and oils from wood stains and paneling. Then I apply one coat of Kilz oil-based primer. Before I apply the primer/sealer, I have it tinted to the same color I am painting the cabinets or paneling (usually a white color). With the white vinegar and the sealer/primer applied, I am positive that my latex paint will now stick. But here is the kicker !!! No matter what brand of paint you use (I use BEHR marquee from Home Depot) It MUST say “self leveling” latex paint. This self leveling paint is designed to dry smooth as glass and never leave brush marks or runs on the surface. Most people even pro painters, do not use my vinegar, sealer/primer and self leveling paint techniques and end up with cabinets that have runs drips and brush marks and paneling that will lets stains seep through within a short time after painting and will certainly look bad and need repainting.

I have hundreds more techniques to share that will stop costly mistakes and I plan on writing about them all. But until then, you can always follow PeteYoungs.com

[hometoursandotherstuff]

Not a bad deal, this 1888 home in Philadelphia, Pennsylvania is a lot of house and if you like color, the current residents really loved it, too. ($389k) I mean, look at the windows and that porte cochere. 

There’s a beautiful green door and screened porche back here. It’s going to need some work, like painting the window panes, but the porch looks fairly new.

What a dramatic entrance hall. Beautiful wood and a fireplace. I’m not that fond of the color combo they chose. It needs a good cleaning, some sanding, stain, and polishing, and the wood should brighten right up.

This built-in is so beautiful.

In the large formal dining room, there are beamed ceilings, a fireplace and a fabulous built-in china cabinet.

The sitting rooms are gigantic, the pocked doors are still intact, and so are the original fireplaces, but they need some work. 

This sitting room is such a saturated orange, it’s going to take gallons of Kilz, if the new owner wants to change it.

Hands down one of the very best kitchen reno’s I’ve seen. Just look at the red stove. 

And, how about this drainboard sink? 

Love the sun porch, it has potential to be gorgeous.

This bathroom on the landing is accessible from both floors. Interesting. 

The stairs and window on the landing are just stunning.

Very large main bedroom with a fireplace and alcove. This is very nice.

The bedrooms are surprisingly bright. This one has a great window seat and it actually has a built-in closet.

This one also has a seat and closet. I wonder if they put up that wall to make 2 bedrooms out of one big one.

When this room is cleared out, it will make a perfect library or home office.

The bath seems to have it’s original footprint.

This room looks done.

The large attic is finished and needs some work, but someone started it, already.

This is cool- a little roof top deck.

Beautiful big deck.

Oooh, a pool, too. Luckily, it has a cover. 

Gorgeous gardens. I love this house so much.

https://www.oldhousedreams.com/2022/05/03/1888-in-philadelphia-pa/

[endzii-rawr]

Installing Wallpaper

At the point when you need to have wallpaper installed in your home, think about these things. Wallpaper has a life span over paint. It will outlive paint 8 to 1. It gives your walls that "Amazing" you can't get with paint. Properly installed it will keep going quite a while and can be removed effectively when applied over a good primer/sealer. The harrowing tales I have seen when a project worker or home click here to learn more proprietor has installed wallpaper over an unacceptable primer over my 27 years in the business have given this industry an undeserving terrible name.

Assuming you are removing old wallpaper prior to installing new, utilize a good stripping arrangement that can be sprayed through a good 1 1/2 lady. siphon up garden sprayer. First you should strip the face (the printed surface) off before the arrangement will enter the support. Try to cover all electrical plates with channel tape to forestall any water coming in touch with them. Try not to be shy with the amount you put into the sprayer and don't be shy on the amount you spray on the wall. Fill the sprayer with warm water to assist the arrangement with entering better. Cover the floor with painters drop fabrics or utilize a few towels to retain the run off. I like to spray a few light covers on the wall, holding up around 3 to 5 in the middle between. Allow the answer for accomplish the work. The sponsorship paper ought to begin to air pocket and you can begin attempting to strip, scratch the easing off. Make a point not to gouge the walls not any more that you need to. In the event that the walls were ready with a good primer/sealer, the sponsorship ought to come off clean. In the event that they were not, say a request since you will doubtlessly harm the wall surface attempting to remove the sponsorship.

On the off chance that the walls are painted, you are ready to apply a good primer/sealer that will set up the surface for the new wallpaper. I like two groups "Zinzer 1-2-3 and" Kilz Premium". there are others available that function admirably and are recommended for wallpaper, however I have involved these two for quite a long time and have had good success with both.

However, if it's not too much trouble, note: These won't deal with a High sparkle or oil surface. For those walls you should utilize an item called "Gripper" Most educated Paint stores can assist you with this. Make preparations and let dry over night.

Installing wallpaper isn't the best thing in the world everybody. It takes a unique expertise and bunches of persistence. That being said, I will attempt to share my insight throughout the course of recent years to offer you the best guidance that I would be able.

While selecting the wallpaper, there are a few things to recollect. Shinny wraps up on wallpaper will quite often feature any surface or flaws on the walls that are to be covered. On the off chance that you are managing a finished wall, attempt and pick a wallpaper that will camouflage (stow away) the surface. The other choice is have a sheet rock project worker come in a smooth out the surface. A few surfaces are less observable than others. Know that dark colored wallpapers will quite often show their appears to be somewhat more that light colors. Enormous rehashes in the example match will cause more waste and more wallpaper. A few wallpapers are pre-glued and some are not.

[ncspaint]

NSL-X AMW100009A-01 WaterBlock Acrylic Masonry Waterproofer Paint, KILZ Interior/Exterior Basement and Masonry Waterproofing Paint, Liquid Rubber Color Waterproof Sealant, Liquid Rubber Foundation and Basement Sealant, Why Do You Need Waterproof Paint For Showers?

[zumpietoo]

It’s been an entertaining week with the betty/Lili stans melting down and outing themselves as only caring about Lili as a self insert (otherwise they would be happy she doesn’t have to work closely with evil Cole). I was wondering, if you don’t mind answering, now that it’s been sometime since you completed it, if you are happy with the Robin’s Egg blue in your kitchen because I was thinking of doing the same and have a similar cabinet colour.

Oh mah dude!!! I adore the robis egg blue! In fact, I’m starting to look for vintage placemats in the same color way.

Btw, it’s kilz (which is a great and very well priced paint) and the color is, I think “Venice escape”

[ncdweller]

In other news, D is covering the water stains in the room that has no name. Water based Kilz this time.

There is a steel beam up there, so iron-rich stains from the leaky roof (repaired) are our nemesis.

Not sure what color we'll paint this wall, but that will be after the ceiling is repaired.

[gregoryaezj021]

10 Fundamentals About Flat Ceiling Paint You Didn’t Learn In School

Which Ceiling Paint Should I Use?

Benjamin Moore Ceiling Paint is a great option for wood surfaces. This vinyl tile flooring can be used in all weather conditions and comes with various styles. It is able to be used on glass, wood, tile and various different surfaces, with ease and dependability. Benjamin Moore products are a well-known choice for interior designers and homeowners due https://felixfurniture.com/best-ceiling-paints/ to their distinctive quality.

The most important element of the exterior of a home the ceiling is often the first thing that people see. Ideal for small or large rooms, the flexibility of Benjamin Moore's Ceiling Paint implies that it can be used on even the dullest walls. The water-resistant , slip-resistant surface is suitable for both painted and unfinished wood surfaces, as well as on metal surfaces. It is ideal for areas that have a lot of traffic , such as hallways and exits. Benjamin Moore's UV stabilizers as well as water-resistant Wall Color provide a long-lasting shine.

Benjamin Moore Wall Color, unlike many commercial grade paints, is free of no VOCs (also known as volatile organic compound), which makes it a more environmentally sustainable option than regular paint. You can pick between two standard options for this paint: flat and texture. Benjamin Moore Ceiling paint is used in a myriad of ways including staining, painting or crown molding as well as other traditional paints.

You can achieve smoothness by using a roller or brush and applying the paint in even smooth strokes. Make use of a roller for the appearance of a bump or texture. You can smooth small areas by allowing the roller to dip. You will need to hold your hand steady to keep the roller from scratching off the finish.

Ceiling paints from Benjamin Moore are quick drying and require minimal cleaning. Utilize a cleaner specifically designed for MDF and wood to remove any extra spray or marks from the brush. Spray the cleaner over the area then scrub it into the wood with a brush. Benjamin Moore also sells an electrostatic charge cleaner that is a great tool to remove difficult blemishes.

Flat white ceiling paint can give your rooms a fresh, clean look. The finish is impervious to flaking, chipping, and fade. It's safe to apply indoors or outdoors as it does not contain VOCs. Combining the flat finish with an exterior finish will add to the room’s natural charm.

Benjamin Moore ceiling paint is high-quality and will last for a long time. It will save you time and money. It can also increase the value of your home. With the new design and feel of these paints homeowners can enjoy their rooms without having to think about the future.

VOCs can also be found in many other brands of the product, so be sure to choose a product that doesn't. Benjamin Moore is well-known for its high quality. This paint for ceilings will give amazing results.

The majority of people believe that ceilings need only two coats of paint. They're mistaken. Most installations require three coats of this flexible ceiling coating. It could be spray-on or drywall tape.

Two coats of latex ceiling paint are often recommended by the installers. This makes the task much easier and speedier. However, if your project includes hanging drywall as well in the form of paint on the ceiling typically, it is best to get two coats. The last coat of paint is able to hide bumpy surface imperfections on the ceiling. This also makes the project easier. Most projects only require two coats.

Many people choose to cover the wall by using wood veneer. There are those who want to cover wall scuffs by using wallpaper. However, this should be avoided when the wall has already been painted. Aluminum or vinyl ceiling tiles are not the best alternative for those in charge of installing their ceilings. One option is to cover up the wall's scuffs using other materials that is commonly used, like drywall paint.

Old paint and veneer could be hazardous, so it is vital to find out whether the paint is still available. Some hardware stores have paint in their inventory However, most will purchase it as required. You can get samples of other materials used by contractors in the hardware stores, which can be a great way to start to know how much stain blocking will work best for your. Kilz ceiling paint is used mainly for interior applications however, contractors will use it all over, including painted walls. Contractors can recommend various kinds and brands, so it's recommended to ask questions and research all options prior to choosing a specific one.

[malecmayhem]

Addicted to Stamped Concrete? Us Too. 6 Reasons We Just Can’t Stop

We will let you find a professional to deal with your venture wants. It does not matter whether it is a small project or a large job, we will find a professional that will help you out.

Referrals — Usually obtain referrals from builders and homeowners who may have used concrete tile contractors. Satisfy with them for getting an appreciation for their determination to excellent and price inside your career. Look for an experienced — Have they got a reputation for honesty and good quality? Do they full their Careers promptly and within just price range? Do they realize and abide by producer requirements for installation? Do your homework — Consider likely contractors’ coverage procedures and record their Experienced license quantity to be able to inquire your point out’s Division of Qualified Regulation and Licensing about its validity.

With various measurements and numerous apps, our gross sales team will get the job done along with you to create customized block configurations to supply options on your precise desires.

Our purpose is to provide data each and every old property proprietor ought to have for making their house glance the ideal it may possibly.

The shape liner then acts as a mildew to the concrete to be formed against. Once the concrete is about, the shape liner is stripped with the hardened concrete floor. The concrete is completely textured Along with the sample of the shape liner. Sector publications[edit]

There are a selection of the way to obtain the unique hues found in decorative concrete. With integral coloring, the goods are released with the All set-mix concrete plant, and are available in dry, liquid, or granular variety. Coloring blended throughout the concrete permits whole-depth shade. Making use of white cement instead of classic gray portland cement can enable for additional colour decisions. Dry-shake colour hardeners are applied topically to freshly positioned concrete, coloring the top three/sixteen inch on the surface area.

Clean up all tools and machines with clear drinking water. For disposal of vacant containers and unused solution, Get in touch with your residence refuse assortment assistance.

Our epoxy flooring contractors will walk you throughout the total process of having polished concrete floors, or decorative concrete in chicago. Polished concrete flooring polished concrete flooring stained concrete vs polished sprucing concrete flooring techniques concrete residential floors for the polished concrete floor strengths and.

Considering that 1990 in Arizona. We satisfaction ourselves from the installation of the best wanting, upkeep free, quick to clean ground coatings & painting companies!

Rated 5 out of five by Gramma7 from Fantastic product or service I pretty much told my partner each week in the past that I was so happy I employed Kilz on the concrete stone.

This is frequently achieved employing equipment like an angle grinder fitted with diamond blades, but is much more successfully achieved working with specialty tools built specifically for slicing patterns to the concrete. Form liner[edit]

Wonderful short article. I often appreciated our households block style and was good to read through up on it. Does any one transpire to understand what you'd connect with the colour of the house with brown windows higher than? We are portray soon and wife And that i fell in appreciate with that appear. Many thanks once more!

Warning IRRITANT Steer clear of connection with eyes. Could lead to eye, nose and throat discomfort. Prevent respiratory of dust, vapors or spray mist. Open Home windows and doors or use other suggests to be sure clean air entry all through software and drying. If you experience eye watering, headache or dizziness or if air checking demonstrates vapor/ mist ranges are higher than applicable boundaries, don an acceptable, effectively fitted respirator (NIOSH / MSHA TC -23C or equal) in the course of and just after application.

This informative article wants supplemental citations for verification. You should assist enhance this article by adding citations to dependable resources. Unsourced content might be challenged and eliminated.

[p-artsypants]

Well. It's the end of an era. For my quarantine project, I painted over the characters I've had on my walls for forever. I, of course, included the befores and afters. The first time I did my room was probably back in 2007-8, when I just painted the walls white and drew them in with sharpie (I don't recommend, the ink will bleed.) These were anime characters and...I didn't tell my parents I was doing it.  The second update was in 2013, when I started to use color and did more american comics and cartoons. Now, in 2020, I was working from home and I really began to notice all the mistakes I made and it started to bother me. I thought, 'eh, these characters don't mean anything to me anymore.' I went out and bought some Kilz and covered them. (To the absolute joy of my parents.) I finally finished putting up the new pattern, one which my mom assures will stay long after I move out. lol

[homeimprovementway]

Can You Tint Kilz Primer? Unveiling the Colorful Possibilities!

Yes, Kilz Primer can be tinted to achieve desired colors as per your preference. Kilz Primer is a versatile product that can be tinted to match the color of the paint you intend to apply, making it an excellent choice for those looking for a flawless finish. Tinting the primer helps to create a solid base for the paint and ensures that the final coat adheres properly to the surface. This process allows for better coverage and enhances the overall appearance of the painted surface. Tinting the primer can also help to reduce the number of paint coats required and save both time and money. Whether you want a bold or subtle look, tinting Kilz Primer offers you the flexibility to achieve a professional finish while also protecting and sealing the surface.

Credit: www.amazon.com

The Importance Of Primer

While it's possible to tint Kilz primer, it's crucial to understand its importance in the priming process. Using the right primer enhances adhesion and improves the coverage and durability of the topcoat. Tinting Kilz primer can provide better hiding power and color accuracy, ensuring a flawless paint job. Primer is a vital step in any painting project, yet it is often overlooked or skipped altogether. But what many people fail to realize is that primer plays a crucial role in achieving a smooth and long-lasting paint surface. It acts as a preparatory layer, creating a strong foundation for the paint to adhere to while also providing a barrier between the surface and the paint. With its ability to seal porous surfaces, cover stains, and improve adhesion, primer is an essential component in achieving a professional-looking finish.Benefits Of Using PrimerImproves Adhesion: Primer helps the paint stick better to the surface, allowing for a more even and durable finish. It creates a layer that binds to the surface, providing a solid base for the paint to adhere to.Seals Porous Surfaces: Unsealed surfaces, such as raw wood or drywall, can absorb paint unevenly, leading to a patchy and uneven finish. Primer seals these porous surfaces, preventing the paint from being absorbed and ensuring a consistent and smooth application of paint.Covers Stains: Whether it's water stains, smoke damage, or stubborn oil-based stains, primer is designed to cover them up. It acts as a barrier, preventing the stain from bleeding through the paint and ruining the finished product.Blocks Odors and Moisture: Certain types of primer, such as Kilz Primer, are specifically formulated to block odors and moisture. This is especially important in high-humidity areas like bathrooms and kitchens, where moisture can cause paint to peel or mold to grow.Kilz Primer - An OverviewKilz Primer is a highly regarded brand in the world of primers. It is known for its exceptional quality and performance, making it a popular choice among homeowners and professionals alike. Kilz Primer is formulated to provide excellent coverage, adhesion, and stain-blocking properties.Types of Kilz Primer: Type of Kilz Primer Features Kilz Original Multi-surface, high-hide formula that blocks most stains and ensures a smooth finish. Kilz 2 Latex Water-based primer that dries quickly and can be top-coated with latex or oil-based paint. Kilz Max Water-based primer that tackles severe stains like smoke, nicotine, and water damage. Whether you're painting a new surface or covering up stains and imperfections, using Kilz Primer can make a significant difference in the overall outcome of your painting project. Its high-quality formulation ensures a professional-grade finish that stands the test of time.

Credit: www.kilz.com

Understanding Tinting Kilz Primer

The Process Of TintingWhen it comes to painting projects, tinting Kilz primer can be a game changer. Tinting involves adding colorants to the primer, which transforms its appearance and provides a base closer to the desired paint color. The process of tinting Kilz primer is straightforward and can be done at your local home improvement store or by using a tinting machine at home.Whether you're tinting Kilz primer for a specific paint color or simply looking to enhance its performance, the first thing you'll need to determine is the desired shade or color. Keep in mind that Kilz primers are typically white, so tinting allows for better coverage and a more even application of the final paint color.Note: Before tinting, it's important to read the manufacturer's instructions and check if the specific Kilz primer you're using is suitable for tinting. Some primers may not be compatible or recommended for this process.To get your primer tinted to the desired shade, you'll have to follow these simple steps: - Start by selecting the colorants needed for your desired shade. These colorants come in liquid form and can be found at paint supply stores or home improvement centers. - Take your Kilz primer to the tinting machine or the paint counter at your local store. Depending on the store, you may need to provide the specific formula or shade you want. - The store attendant or machine operator will then add the chosen colorants to the primer, using the formula provided. They will mix it thoroughly until the color is evenly distributed. Once the tinting process is complete, your Kilz primer will be ready to use. Remember to mix it well before applying, ensuring that the color is evenly distributed throughout the primer.Factors To ConsiderBefore tinting Kilz primer, there are a few factors to consider to ensure the best results: - Type of Primer: Check if the Kilz primer you're using is suitable for tinting. Oil-based and shellac primers may not be appropriate for tinting, while latex and water-based primers generally work well. - Color Choice: Think about the final color you're aiming for and select the appropriate colorants. Keep in mind that the color of the primer will affect the final result, especially with lighter paint colors. - Opacity and Coverage: Understand that tinting Kilz primer will affect its opacity. For better coverage, particularly with vibrant or deep colors, consider opting for a tinted primer that matches your final paint color more closely. This can help reduce the number of paint coats required. - Compatibility: Ensure that the colorants you choose are compatible with the Kilz primer you have. Some primers may have restrictions on the types of colorants that can be used. By taking these factors into account and following the steps for tinting Kilz primer, you'll be well on your way to achieving a smooth and successful painting project. Tinting not only enhances the performance of the primer but also saves time and effort by providing a closer match to your desired paint color.

Exploring Color Options

When it comes to priming surfaces before painting, Kilz primer is a popular choice due to its effectiveness in covering stains and providing a smooth base for paint application. One question that often arises is whether Kilz primer can be tinted to provide a more customized color option. In this section, we'll explore the possibilities of tinting Kilz primer and how it can be used to customize and complement your paint color choices.Customizing With Tinted Kilz PrimerTinting Kilz primer offers the option to customize the base color for your paint, providing a personalized touch to your project. Whether you're aiming for a specific shade or looking to enhance the vibrancy of the topcoat, tinting your Kilz primer allows you to achieve a unique color that complements your space.Color Matching And Complementary TonesMatching Kilz primer with your desired paint color is essential for achieving a cohesive look. By selecting complementary tones or closely matching colors, you can create a harmonious transition between the primer and the topcoat, ensuring a professional and polished finish.

Application Techniques

When it comes to applying tinted Kilz primer, following the right techniques is essential to achieve the desired results. Whether you are a professional painter or a DIY enthusiast, understanding the best practices can help you ensure a smooth and successful application process.Best Practices For Applying Tinted PrimerWhen it comes to applying tinted Kilz primer, there are a few best practices that can help you achieve the best results: - Clean and prepare the surface: Before applying the tinted primer, make sure to clean the surface thoroughly. Remove any dirt, dust, or grease that could hinder the primer's adhesion. If necessary, sand the surface lightly to create a smooth and even base. - Use the right tools: To ensure a seamless application, it's crucial to use the right tools. A high-quality brush or a roller can help you achieve an even and professional finish. Consider the type of surface and the size of the project when selecting your tools. - Apply in thin layers: Instead of applying a thick coat of tinted primer, it's recommended to apply multiple thin layers. This allows for better coverage and helps prevent drips or uneven application. Allow each layer to dry completely before applying the next one. Tips For Achieving Desired ResultsIf you want to achieve the desired results when tinting Kilz primer, keep these tips in mind: - Select the right color: Choose a tint that matches or complements the final paint color you plan to apply. This will help create a uniform and harmonious look. - Test on a small area: Before tinting the entire batch of primer, it's wise to do a test on a small inconspicuous area. This will allow you to ensure that the tinted primer will achieve the desired shade and consistency. - Follow the manufacturer's instructions: Always refer to the product's instructions and guidelines provided by the manufacturer. This will help you understand the specific procedures and requirements for applying the tinted primer. By following these application techniques and implementing the best practices and tips, you can achieve professional-looking results when tinting Kilz primer. Remember to work in a well-ventilated area and take necessary safety precautions throughout the application process.

Expert Recommendations

Looking to tint Kilz primer? Get expert recommendations for achieving the perfect hue and finish with your primer application. Follow these tips for a professional result. Insights from professionals can be highly valuable when it comes to understanding how to get the best results from tinted Kilz primer. These experts have extensive experience and knowledge in the field, and they can provide helpful guidance and recommendations. Let's explore some expert insights below. Maximizing The Benefits Of Tinted Kilz Primer When it comes to using tinted Kilz primer, professionals have a few recommendations to ensure the maximum benefits. By following these tips, you can achieve better results and make the most out of this primer. Here are some expert suggestions to enhance your experience:Insights From Professionals1. Choose the right tint color: The color of the tint can greatly affect the final outcome of your project. Consult with a professional or use a color wheel to determine the best tint for your specific needs.2. Use the appropriate ratio: When tinting Kilz primer, it's crucial to follow the manufacturer's recommended ratio of primer to tint. This ensures that the primer retains its intended properties while adding the desired color.3. Blend well: Thoroughly mix the tinted Kilz primer before application. This helps to evenly distribute the color throughout the primer, resulting in a consistent finish.4. Test it first: Before applying tinted Kilz primer to a large surface, it's advisable to test it on a small inconspicuous area. This allows you to evaluate the color and ensure it matches your expectations.5. Apply in even coats: To achieve a smooth and professional-looking finish, apply the tinted Kilz primer in thin, even coats. This helps to avoid uneven coverage or excessive buildup of color.6. Consider the lighting: Keep in mind that lighting can impact how the tinted Kilz primer appears. Take into account the natural and artificial lighting in the room to ensure the desired color effect is achieved.By following these expert recommendations, you can optimize the benefits of tinted Kilz primer and achieve outstanding results in your painting projects.

Credit: www.amazon.com

Frequently Asked Questions On Can You Tint Kilz Primer

Can Kilz Primer Be Colored? Yes, Kilz primer can be colored. It is available in a variety of colors to match your desired paint color. Simply select the color you want, and Kilz primer can be tinted to match it. Can You Add Tint To Primer? Yes, you can add tint to primer. Tinting primer helps to better match the final paint color, improving coverage and reducing the number of paint coats required. This can save time and improve the overall finish of the paint job. Can Zinsser Primer Be Tinted? Yes, Zinsser primer can be tinted. What Paint Goes Over Kilz Primer? You can use any type of paint over Kilz primer.

Conclusion

Tinting Kilz primer can provide a custom base for your paint. It allows for better coverage and can even enhance the final color. Keep in mind the type of paint you plan to use and consult with a professional for the best results. Make sure to follow the recommended ratios for the best outcome. Read the full article