#house davion

[moustacherie]

Marauder! Another perpetually-in-progress finally complete. I'm especially a fan of the little antenna barbels I added, gives it vibes of the original unseen.

The Exterminator! The most sneeki-breeki stealth boy out there. The base color was a custom mix meant to evoke the radar-absorbing paint look from the SR-71 and F-117, and I'm especially proud of the freehand Star League emblem.

[is-the-battlemech-cool-or-not]

by u/MagnanimousTaco

[crippledautist]

With my semester well and truly underway, figured I'd throw these up since it's going to be a bit before I can do a significant amount of painting again. 1st Argyll Lancers, AFFS. (Some have yet to be based.)

[agbpaints]

Getting back into the swing of doing paint tutorials- I pulled a Spider out of a salvage box and I figured I'd do a quick and dirty davion scheme! This is the parade paint job for the First Davion Guards, AKA quintessential battletech 'good' guy mechs.

Paints you will need:

Black primer

Dark grey (citadel mechanicus standard grey)

Light grey (citadel dawnstone)

Off white (army painter spaceship armor)

Red (citadel mephiston red)

Light blue (citadel baharroth blue)

Green (citadel warpstone glow)

Gun metal (citadel leadbelcher)

Silver (citadel rune fang steel)

Dark wash (citadel drakenhof nightshade)

Citadel akhelian green cintrast

Citadel blood angels red contrast

Things you might want

Khaki (citadel zandri dust)

Fleshy orange (citadel ratskin flesh)

White (army painter matt white)

Dark green (citadel Caribana green)

Light red (citadel evil sunz scarlet)

Yellow (citadel averland sunset)

Black (army painter matt black)

Citadel aggaros dunes contrast

I started by basing my mini with my normal desert badlands basing scheme (paint base in glue, sprinkle on basing sand and let cure. Paint on more glue and stick down some aquarium gravel) and then priming the whole thing black with brush-on primer.

Once the primer is finished drying, load some of your dark grey up on a fat drybrush, wipe off slightly less than most of the paint, and then apply the remainder to the model in long up and down strokes. All of the panels should be grey, with some black showing in crevices and hard to reach recesses of the model. Next, repeat this process with your light grey paint, but wipe off more and apply less liberally- you want the darker grey color to remain in most places with the edges and raised details highlighted in grey. Finally, drybrush the model one last time with your off-white color only in the areas that will catch the light most like the head, torso, shoulders, the vectoring fins on the mech's back, and the outstretched left knee.

Now that the mech has been presented in greyscale, we can make it blue. Akhelian green is going to be doing the majority of the heavy lifting in this paint scheme- I find it to be a pretty easy contrast paint to work with. Apply it undiluted to the model, looking to spread it in a single coat like a thick wash, and then leave it to dry for 20 minutes. Afterwards, you might want to brighten the blue up in places as I did- drybrush on some light blue in the same areas you used off-white earlier.

At this point, I got a little excited and decided to do the Davion stripes. Start with your red, pretty well thinned on your palet, and a thin detail brush. To make this easy on ourselves, we're going to look for vertical panels on the left side of the mech's torso and leg and basically connect all of those with a straight line. In the case of the Spider, the easy ones are the shoulder and that panel that runs down the upper thigh. Apply a thin edge highlight of red along those panels and then carefully continue the line down the rest of the leg, terminating at the ankle. If your hand is steady enough, run a thin line of red around the mech's ankle where the vertical line ends. Then, go back with your off-white and using the red line you made already as a guide, run a parallel stripe down the outside edge of the red (if you swap these battletech nerds will dunk on you online).

At this point, I also striped the ridge running down the Spider's helmet, but it's not super necessary.

Now that we've got our blue sorted out, we've got a bit of a 'draw the rest of the owl' step. First, you're going to want to go back over any of the parts of the model that you want to be exposed mechanical elements with your dark grey. I painted the joints in the legs, the shoulders, the lasers and the big vent on the chest, the 'chin strap' under the spider's canopy glass, and the jump jets in this color. Then, wash the grey with your favorite dark wash- I really like the deep blue of drakenhof nightshade but something like nuln oil will also work well for this. Finally, apply a light drybrush of your light grey to the shaded grey. If a part is too recessed to easily drybrush, you can leave it as is or do use a small brush to carefully highlight it. You should also add a small dot of green to the inside of each of the laser barrels at this point.

Next, paint the mech's canopy glass silver. Once that's dry, paint over the silver with blood angels red or any other colorful contrast paint for a vibrant metallic color.

If you're following along with my desert basing, paint the sand on the base khaki and the larger pebbles with your fleshy orange. Then paint over everything with agarros dunes contrast or a dark brown wash like agrax earthshade.

And with that you have a Spider that's fully ready for tabletop with 3 colors, shading, and a textured base. There's still a couple more things we can do if you have more time and patience that I'll detail below.

To apply some quick and dirty jeweling to the lasers, start by painting a half circle of light green on each barrel, focused on one of the bottom corners. Paint the recess of the barrel with a dot of dark green and put a tiny little dot of white opposite the half circle of green, which should now be more of a crescent shape with with dark spot in the center.

While the white is still in your pallet, you can also highlight the parts of the off white stripes on the mech most exposed to overhead light like the lower thigh, knee, and shoulder. Do the same thing with the red stripe using a light red as well.

At this point I also added unit numbering to the mech's shoulder. Basic numbers are a really good way to practice your fine control and I try to consistently add a couple to each of my projects. Use your off-white well thinned and a fine detail brush, lock your hand holding the model against your hand holding the brush just below the wrists, and then draw the paintbrush 'downwards' with a pulling motion. This should keep you your line relatively straight and fine.

While you can keep the jump jets on your mech dark I prefer to paint mine with some orange in them. Using the fleshy orange from earlier, paint most of the interior of each jump jet, then add a dot of yellow at the very deepest recess of each one.

Finally, let's add some hazard stripes to the mech. Pick out a few areas near joints or vents that seem like a bad place for an Astech's hand to go and paint in a thick 'edge highlight' of black. Then, going back to yellow find the center of the line and add a diagonal tickmark there. You may need to go over this more than twice to get a strong color depending on your yellow. Once your centerline is marked, work out towards the edges, painting another ticmark at regular intervals until you hit the ends of the Black.

[sweet-zards]

Here’s all my silly little Battletech mechs that I painted last weekend! I’m gonna make them kiss!

[blackboxfaxes]

Naginata Battalion engages the 1st FedCom RCT over the most important objective in the Inner Sphere

[missallyblue]

In the Battletech universe, there are no good guys.

Instead, you get to choose your flavour of awful.

I, myself, am a Davion gal. House Davion of the Federated Suns are largely modeled off of the French and British monarchies, and are smug, imperialist assholes who deliver freedom by the barrel of a gun.

They haven’t got the biggest military in the setting, or the best equipped, but what they do have is well trained and professional, and they have a magnificent fetish preference for sticking autocannons on ANYTHING they’ll fit on. There is no amount of dakka that is considered too much dakka.

Anyway, all that is to say that I’ve been badging up my mechs lately. I’ve been using very, VERY tiny decals with the sun and sword Davion badge, even if I’m keeping my mechs OD green and not going for the blue, white and red (sound familiar?) parade schemes they tend to go for.

[doolallymagpie]

honse davion, is that anything?

[legionofmyth]

BattleTech: The Succession Wars

🎲 Experience the epic conflicts of The Succession Wars board game, set in the BattleTech universe. Engage in strategic warfare reminiscent of Risk. Conquer, dominate, and seize your path to power! #BattleTech #MechWarrior #Gaming #SciFi #Mechs

Ah, The Succession Wars tabletop board game, a captivating embodiment of the tumultuous era that has shaped the very fabric of our noble houses of the Inner Sphere. As a House noble, I find myself drawn to the intricate tapestry of political intrigue and military strategy that unfolds upon the interstellar battlefield. It allows me to indulge in the art of grand manipulation, deftly navigating…

[ultra-nohai]

European Maxi-Single CD covers from the album, "Clevolution" by Brayden Nohai

[diwns]

and i was stun-locked

[laguzmage]

Gonna schedule a new batch of battlemech of the weekday posts but it had to be Fafnir Friday at least one more time

[ross-hollander]

Everybody makes a joke of it...

...but the Liao delegation really did walk out of that wedding with a good forty or so plates. Not cheap, either, serious high-quality china. Custom work. The House still has them, and dines on them regularly. The Davions, for their part, still want them back, although their claims that it was unbecoming behavior for a wedding guest to steal the flatware fall flat to the typical riposte that declaring war is pretty unbecoming behavior for a host.

[krinsbez]

BattleTech WorldBuilding Thought

So, I get why the BT devs have skimped out on giving the Great Houses all the pageantry and regalia and other nonsense that RL monarchs have, but I don't see why we can't make stuff up. But as a n00b I'm not confident of doing so myself.

I'm just gonna make some suggestions of things we can do, and see if any of y'all have ideas?

-So, traditionally, the Archon of the Lyran Commonwealth's throne is flanked by a pair of Griffin BattleMechs. I think they ought to have names. What would be best?

-Crown jewels. Nobody seems to have them, at all. the least we can do is come up with names for their main crowns (because monarchs often have several of those), although we have no descriptions of any of them, so we'd have to make that up ourselves, also.

-I believe the Kurita's Dragon Throne is the only named throne. We can do better (also, the Dragon Throne was the throne of the Emperors of CHINA, not Japan, but the Kuritas getting that detail wrong feels in-character)

-Again, to my knowledge, only the Steiners and Kuritas have their own mottoes, that being "Indomitable Will" and "Honor the Dragon", respectivaly

-To my knowledge, only the Davions have their own Coat of Arms, separate from that of the nation itself, which I don't know enough about heraldry to properly describe in heraldic language, but looks like this:

What would you give the other Houses?

-To my knowledge, the Chancellor of the Capellan Confederation is the only one of the Successor Lords that has a Style of any kind, that being "Celestial Wisdom", which sounds impressive until you realize that the short version of King Charles' official royal style (IE, not including his lesser titles, knightly honors, military rank, etc.), specifically in the UK (because he is also King of the Commonwealth realms), is "Charles the Third, by the Grace of God, of the United Kingdom of Great Britain and Northern Ireland and of His other Realms and Territories King, Head of the Commonwealth, Defender of the Faith". The full version (again, purely royal UK titles) is "the Most High, Most Mighty and Most Excellent Monarch, our Sovereign Lord, Charles III, now, by the Grace of God, of the United Kingdom of Great Britain and Northern Ireland and of His other Realms and Territories King, Head of the Commonwealth, Defender of the Faith, and Sovereign of the Most Noble Order of the Garter". This is in addition to being Addressed or referred as "Your/His Majesty"" (which depending on circumstances may be modified to "Your/His Gracious Majesty", "Your/His Most Excellent Majesty", or "Your/His Britannic Majesty")

Anyways, all the Successor Lords ought to have styles that are at least as grandiose as this, I think? Suggestions?

I have spent way longer on this than I expected, sorry.

[sweet-zards]

Painted up the Alpha Strike box this week, this time going for the 1st Crucis Lancers as my paint scheme. All of the mechs here were painted this month and I still haven’t played the game!

[is-the-battlemech-cool-or-not]

New images of the not-yet-released House Davion Heavy Battle and Cavalry Lances!

The Heavy Battle Lance has the Templar, Falconer, Thanatos, and a new Thunderbolt variant.

The Cavalry Lance has the Hellspawn, Legionnaire, Gunsmith, and a new Enforcer variant.