#elastic rubber tape

[dineshenterprise]

Elastic Tape Manufacturers and Suppliers in Gujarat-Dinesh Enterprise

Dinesh Enterprise is a leading manufacturer and supplier of elastic tapes in Gujarat. They offer a diverse range of high-quality products, including polyester, rubber, and knitted latex elastics. Catering to various industrial and commercial applications, they ensure superior durability, elasticity, and performance.

[chetanagblog]

Elastic Rubber Tapes Market is expected to grow at a CAGR of 4.22% during the forecast period. Global Elastic Rubber Tapes Market is expected to reach US$ 5.43 Bn by 2029.

[jainnarrowfabrics]

Elastic Rubber Tape

Elastic rubber tape is a multifunctional and resilient binding material designed to provide exceptional flexibility and durability in various applications. This innovative tape combines rubber's stretchiness with traditional tape's crucial capabilities, making it an indispensable tool for a wide range of tasks.

[fulflex]

Our elastic rubber tapes are specially formulated synthetic or natural rubber compounds that deliver superior results for any elastication application in the demanding fabrics of today’s textile industry. 

[projectforyou]

Elastic Rubber Tapes

[richagup]

Elastic Rubber Tapes

[kaijutegu]

Is It Ok For An Alligator To Have Tape On Their Mouth?

Alligators make pretty amazing animal ambassadors when handled safely and ethically. And it is actually pretty safe to take them out to interact with the zoo-going public (or general public in some settings), when done correctly. Many zoos and outreach organizations do an amazing job of this! Every state has different rules, but even if a state doesn't mandate that alligators be banded... well, if you're a responsible crocodilian handler, you'll band anyways. It's a huge public safety issue! Even an accidental graze against their front teeth can cause injury. See, the alligators that are used as handle-able ambassadors are pretty small, and their teeth are razor sharp. An adult gator has sharp teeth, too, as well as blunt teeth for crushing, and they also have the additional force of their jaw muscles.

Here's what it sounds like when an adult alligator pops his jaw. (Don't worry about the hissing/gaping; this is a trained and queued behavior. The stick towards the top of the inside of the mouth is triggering the bite reflex. Chester probably got lots of chicken and fish as he learned to do this.)

Skip ahead to 0:32 if you wanna skip the guest commentary.

What's more, biting is an important reflex for crocodilians. The lower jaws of crocodilians are some of the most innervated tissues in the animal kingdom; they are more sensitive than human fingertips! Even the slightest touch triggers their bite reflex, which likely is an adaptation that lets them detect changes in water pressure that signal a snack heading their way.

Here's a pretty good video about the biomechanics of crocodilian jaws:

So yeah. They need to not be able to bite for public safety. There's just too much risk involved with an unbanded alligator (or other crocodilian). Fortunately, it's easy to get a crocodilian to not bite- you just need to band its mouth!

(This fella is Frodo the dwarf caiman, but the principle is the same.)

This works because while crocodilians have an extremely strong bite force (claims range from 2,000 PSI to 5,000+ PSI, but I don't have time to get into that now but someday I will probably), but not particularly strong muscles to open their mouths. Selective pressure for quickly nabbing prey in murky water where there's not a lot of visibility lead to pterygoid and adductor muscles so big, they extend into the animal's neck. But those muscles only pull the jaw closed- they don't work to open it! That's why you see people holding an alligator's mouth closed with their hands.

Safe bands include:

Silicone tape- this is the best. It sticks to itself and not the gator's snout

Electrical tape

Medical tape

Rubber or elastic bands

There are other options, but these are the most popular- they're cheap, easily available, and safe. So if you see an alligator (or other crocodilian) out in public and it's got tape on its mouth, don't worry too much- it's safe for the gator (most of the time) and it's safe for you!

Here's a couple of safe tape options, modeled by a juvenile American alligator in pink electrical tape (I forget her name, these are from an outreach event a couple of years ago) and Pagasa, a juvenile Philippine crocodile wearing the white medical tape.

So when is tape not safe? When it's the wrong kind of tape. One of the worst offenders is duct tape.

When you're banding an alligator, you need to think about how sensitive their jaws are. A band that's too tight or too sticky can hurt them badly when it's removed- and you want that removal process to be fast, so that it doesn't stress them out too much.

What inspired this post was this picture I saw on Facebook:

That's so much duct tape! Now, this little guy is quite unhealthy; he's been loose in the Pittsburgh area all winter, and he's been struggling. What you see here is a very quick tape job done as he's getting ready for transport. The article didn't say who taped him, but given that he's in a dog crate and was found by bicyclists, I would wager that it was some harried animal control officer who was doing the best they could. And that's fine because this was truly an emergency situation. In an emergency situation, uncomfortable is always, always better than unsafe.

But if you see a tourist attraction and they've put duct tape on their alligator's mouth? That's a red flag! Banding an alligator in public is the safe, correct thing to do- you just want to make sure that it's done right.

If you want more information about alligator jaws, here's some interesting papers to read:

Erickson, Gregory et al. Insights into the Ecology and Evolutionary Success of Crocodilians Revealed through Bite-Force and Tooth-Pressure Experimentation. PLoS ONE 7(3): e31781.

Knight, Kathryn. Croc Jaws More Sensitive Than Human Fingertips. Journal of Experimental Biology (2012) 215.

Sellers et al. Ontogeny of bite force in a validated biomechanical model of the American alligator. Journal of Experimental Biology (2017), 220.

[docgold13]

Heroes & Villains The DC Animated Universe - Paper Cut-Out Portraits and Profiles

Rubber Band Man

Adam Evans was a young man who grew up in Dakota City.  An aspiring musician, Adam had a true knack for writing rap songs and he made a demo tape for the acclaimed music producer, D.J. Rock.  Rock claimed not to be interested in Adam’s music, yet secretly stole his lyrics and used them to make his own protégé, ‘Ice Pack,’ and hugely successful hiphop star.   When Adam discovered he had been swindled he was furious; and yet there was nothing he could do about it.  

All this changed when Adam was exposed to the mutagenic effects of the Quantum Vapor were released during the so-called 'Big Bang' event.  Adam was bestowed shapeshifting powers wherein his body became highly elastic, enabling him to elongate his limbs and manipulate his form in various fashions.  Now calling himself ‘The Rubber Band Man’ Adam made himself a costume and set out to get revenge on Ice Pack and DJ Rock.  

The heroic Static witnessed Rubber Band Man going after Ice Pack and attempted to intervene.  This would prove to be the first in numerous altercations between the two.  Static prevailed and the Rubber Band Man was apprehended; while DJ Rock was exposed as a thief and fraud.    

The Rubber Band Man would later escape form prison and would have further dealings with Static.  Eventually, Rubber Band Man became something of an antihero and aided Static in dealing with the villainous schemes of his older brother, Ebon.  

Actor Kadeem Hardison provided the voice for The Rubber Band Man, with the villain turned hero first appearing in the fifth episode of the first seasons of Static Shock, ‘They’re Playing My Song.’  

[kingofthe-egirls]

hihi i love ur hurt/comfort and would like to make a request 🫶🏽 what do u think of reader/you getting injured somehow, and luffy being overprotective & needy about it?? 🫣

so i hope this satisfies your cravings

SPRAINED ANKLE: LUFFY x Y/N

(cw: est relationship, sprained ankle, food mention, kissing, cunnilingus, so many m dashes sorry lmao)

(a/n: this feels like a part 1 but im scared to promise anything in case i dont wanna)

Songs: "All the Stars" by Mree

words: 870

You’re sitting with your foot propped up on a pillow, at the foot of the crow’s nest. Bandages wrap around your sprained ankle, with a silver ice pack freezing your skin.

Luffy is screaming at Sanji for food, as usual, since it’s almost noon and he has to snack at least every three hours. You lick your lips, waiting for the sudden impact you know is coming.

Smack!

Luffy collides into your side, sending the ice pack flying. His arms are wrapped around your waist, his face already smushed against yours.

“Kitty!” He shouts directly against your cheek. You strain away from his megaphone of a voice, squirming in his elastic arms.

“Stop it,” you complain, swatting him away. He groans, slumping against you with his head buried in your hair. He sniffs, once.

“Sorry,” he says, muffled.

You wriggle out from under him, his arms loosely draped over you like ship’s ropes. He’s got his black coat on, with his scarlet cardigan left open over his sculpted torso.

He snaps his hands back to normal. It’s like reeling in a measuring tape.

“Sanji’s making salmon today,” he swipes at his nose, squatting next to you with his dusty sandals planted firmly on the deck’s wooden slats. He’s scanning the horizon, sky reflected in his dark chocolate eyes. He smiles back down at you, squeezing them shut.

“Let’s make snacks!” He lifts you up with strong arms, carrying you bridal style toward the kitchen. He squats down again, still cradling you, as he picks up the ice pack he’d scattered earlier. He stands, his arms under your shoulders and knees, and kisses the tip of your nose. You hide your face in his neck, and sniff.

Cedar.

His sandals slap against the deck as he carries you across. You let your head fall on his shoulder, your eyes slipping closed. He’s carrying you oh so gently, slower than any rubber-wrapped speed shot he usually does.

He side-steps you into the room, softly closing the door behind him. You lift up, expecting to see the kitchen, but you’re surprised.

Luffy’s quarters.

“Captain?” You ask, staring up at him, the sharp underside of his jawline above you. He smiles down at you, sparkling eyes heavy.

He sets you down on the mattress, ass first.

“Wanna taste,” he says, sliding his hands up your legs. He squeezes at your thighs, smiling brightly. The lantern suspended from the ceiling sways above him, rocking in time with the subtle movement of the ship. “S’okay?”

Desperate, you nod.

Captain Luffy smirks, sliding your shorts down with no further hesitation. He sniffs deeply at the apex of your thighs, his lips dusting over the coarse hairs. He presses a kiss to the mound, this place at the center of yourself. He thumbs down your outer lips gracefully, spreading you apart ever so slightly. His lips part in awe.

“Sweetness…,” he whispers, swiping the tip of his tongue across his bottom lip. He softly strokes down the hood of your slick clit. His eyes sear yours as he circles the swollen head, his lashes casting shadows over his squishy cheeks. He smirks. “Say please?”

“Pleeaassseee,” you moan, arching your hips. He snickers, and then leans down on his stomach to nestle his face in front of your cunt. He noses at your clit, smooching the base of your entrance. He stays there, for a second. Just silently reintroducing his face to your pussy.

His hand skims down your leg before he hooks his fingers beneath your knee, setting it over his shoulder.

Your sprained ankle finds a comfortable place beside his spine, and you settle back into the bed.

You close your eyes.

****

Luffy sucks on your swollen clit, stealing little kisses in between. His thumb presses inside your pussy, squirming around as he buries it deep. He slathers his tongue over you, starting to thrust his thumb inside and out. Something flutters around his digit—something deep like it’s at the center of the earth—something forbidden and unseen and you’re squeezing—

He hisses, “S’tight, shit—,” before sucking harshly on your clit as you squirm. He speeds up inside you, lust clouding his senses as you start to sound out your pleasure from beneath him. He stuffs his tongue inside you, slurping at your juices as you scream (cream)--so he laughs and laughs inside of you. His voice vibrates through your abdomen as you seize and squirm and start to unravel beneath his tongue and his teeth and he’s he’s he’s um oh god he’s———

Everything.

Spots dance in front of your eyes, so you try to blink them away. Spit drips down your face.

Luffy rasps over you, his wheezy breaths scratching in his throat.

“Kiss me,” you say, so he does.

His lips taste like you.

He groans as you slide your tongue inside his mouth, coaxing him to start stroking it against yours.

He swoons into the kiss, something high-pitched and squeaky sounding from the back of his throat. His body melts against you.

“Luffy…,” you whisper, bitten lips swollen and stinging as you both devour each other’s faces. Like animals, sometimes. He scrapes his teeth against your cheek. “So sexy.”

“Thanks, princess.”

****

[searincosplay]

Here's a breakdown of how I made my Archaic sandals for Link! I don't have many progress photos because of course I was crunching these for no good reason so be prepared for a long description below the post break. I was following the step-by-step process laid out in the book The Sandal Making Guide. If you're looking for a detailed introduction to sandal making, get this book! It tells you all the tools and materials you need and the photos and explanations are super concise and clear.

I started with a plastic wrap and masking tape copy of my leg and foot that I drew the placement and size of the straps on and then transferred it to a paper pattern.

The straps are made from a lovely grainy textured milled veg-tan leather and the footbed and outsole are regular veg-tan leather that I custom dyed. The main foot straps I wet molded to my feet and then marked the placement for the strap slots onto the soles.

Where the foot straps go behind and under the heel, there's a couple small, hidden pieces of elastic that connect them so they can stretch enough for me to slide the sandals on.

The straps and sole layers are contact cemented together with the ends of the straps shaved down to reduce bulk. I trimmed down the sole edges and evened them out with a surform plane since I don't have a belt sander. The last step was to rough up the bottom of the leather soles and contact cement a very thin rubber shoe soling so the sandals actually have some traction 😂

At this point I've walked several con days and at least over 10 miles in them. Overall, they're really comfortable, durable, and the custom fit is so nice! Only downside of this particular style is there is no arch support, so my muscles do get pretty tired and sore after a full day of walking.

I know this is super wordy with not a lot of WIP photos, feel free to ask any questions you might have!

[dineshenterprise]

Elastic Rubber Tape Manufacturer -Dinesh Enterprise

Dinesh Enterprise is a premier manufacturer of elastic rubber tapes, offering a diverse range of high-quality products. Their tapes are designed for various industrial and commercial applications, ensuring excellent durability, flexibility, and reliability. They are committed to delivering superior performance and customer satisfaction.

[chamaknikar-garage]

Replace 3 elastic in vintage Adidas (part one)

This is the gear a used. Not on picture, a sewing machine, and a pincet.

1 Mark the place in the waistband where I will open the sewing thread. Always on the backside near the center seal. At the left of right of the label

2 Fix the existing thread with a “button stitch “ at either end. If hand stitching, you can make it smaller and meaning a knot. (The mask tape is about 2,5 cm wide)

3 Using a torn knife, open about 2 cm between the button stitches. The masking tape protects the cotton liner

4 clean the removed thread on right and back side.

5 pull out the old elastic with a pincer, starting with lower elastic, cut ✂️ and pull out gentle by hand at one side and using you free and to stretch the waistband lightly . Don’t remove the drawstring if not necessary. If you prefer, you can replace it with a fourth elastic.

6 cut the new elastic at the right length ( see separate posts ) The old elastic was relatively good for this age.

7 attach one end of the elastic on the special needle. If fixed it with a pin 📍 This method is fast when experienced doing, as you can pull backwards! For the first times, fix it with some thread is a los safer, as backwards pulling is possible. Also use this method when the shorts is damaged or repaired.

Once attached, fix the other end with a clothes pin, and enter the needle in the upper tunnel over the drawstring.

8 work the needle through bit by bit, by pusching and stretching the fabric over the needle.alternatively holding top end end. Be careful at the seams of damaged places. Go until make a complete loop and exit, over the drawstring .

9 remove the needle and fix both end so it won’t slide in again. Feel through the fabric with your fingers the elastic did not make turns, and both ends are 3 cm overlapping.

10 using the fines needle 🪡 and a double thread and enter from the inside , between the upper elastic strings so you don’t damage the rubber and use the fabric.

11 make the shortest turn, and enter from the other outside again to the inside of the elastic.

Make a double knot, and continue sewing now going through the elastic and make the shortest turn, but allow advance to the left like making a spiral around the upper rubber.

12 Continue to the end of the overlap. Then stretch the elastic so the windings of the thread loosen a bit. The make a knot like at the beginning. Check the sewing’s and knots!

Continue here…

[kabirbajaj]

Make Ball Bouncer For Kids With Waste Material | DIY toys | Toys from Trash | Best from Waste 

Kids and their obsession with toys is never-ending. Sometimes, the endless toys could not keep them entertained for a longer time. So, instead of giving them a toy every time,  why not make a toy from waste material with their help? 

So, today’s short and quick video is about making a ball bouncer from waste material that is a fun and easy DIY project. Here’s how to do it -

First, gather an empty plastic bottle, scissors, a rubber band, and a small ball (like a ping-pong ball or a bouncy ball). Cut off the bottom third of the plastic bottle, making sure the edges are smooth so no one gets hurt.

Next, take the rubber band and stretch it across the open mouth of the bottle. Secure it tightly by looping it around the bottle’s neck several times. This rubber band will act as the launcher.

Place the ball inside the bottle, resting on the stretched rubber band. To play, pull the rubber band down slightly and then release it to launch the ball into the air.

For added stability, you can tape the bottle to a flat surface. Alternatively, you can create a handle by attaching a piece of sturdy cardboard or another section of the plastic bottle to the base.

This simple toy not only provides hours of entertainment but also teaches about elasticity and energy transfer. Plus, it’s a great way to recycle and turn trash into something fun!

[ylresin]

Understanding Hydrocarbon Resins: Overview and Applications

What Are Hydrocarbon Resins?

Hydrocarbon resins, commonly referred to as petroleum resins, are synthetic resins derived from unsaturated hydrocarbons. These versatile materials are typically produced from crude oil or natural gas through processes such as thermal or catalytic cracking. They are recognized for their high thermal stability, strong adhesion, and compatibility with various polymers, making them integral to numerous industrial applications.

Types of Hydrocarbon Resins

C5 Resins:

Derived from C5 feedstocks (aliphatic hydrocarbons like pentenes).

Characterized by low molecular weight and tackiness.

Ideal for adhesives and coatings due to their stickiness and flexibility.

C9 Resins:

Made from C9 feedstocks (aromatic hydrocarbons such as indene and styrene).

Known for higher molecular weight, thermal stability, and color stability.

Suitable for rubber compounding and ink formulations.

C5/C9 Copolymer Resins:

A blend of C5 and C9 monomers.

Provides a balanced set of properties, useful in adhesives and sealants.

Hydrogenated Hydrocarbon Resins:

Undergo hydrogenation for enhanced stability, reduced color, and odor.

Suitable for applications requiring high purity, such as hot-melt adhesives and packaging materials.

Applications of Hydrocarbon Resins

Adhesives:

Hot Melt Adhesives: Essential for hot-melt formulations due to tackiness and adhesion, used in packaging, bookbinding, and pressure-sensitive adhesives.

Pressure-Sensitive Adhesives: Enhance tack, adhesion, and peel strength for tapes, labels, and hygiene products.

Rubber Compounding:

Serve as tackifiers to improve processing, adhesion, and reinforcement in tires, conveyor belts, and other rubber products.

Provide a balance between tensile strength and elasticity.

Coatings:

Paints and Varnishes: Improve adhesion, gloss, and durability in various paints and varnishes.

Road Markings: Enhance adhesion and weather resistance in traffic paint formulations.

Printing Inks:

Offer excellent adhesion, color stability, and fast drying for flexographic and gravure inks.

Packaging:

Used in films and coatings to improve mechanical properties, adhesion, and sealing.

Tapes and Labels:

Increase tackiness and adhesion in adhesive tapes and labels.

Sealants:

Integral to sealant formulations for construction and automotive uses, providing good adhesion and flexibility.

Advantages of Hydrocarbon Resins

Cost-Effectiveness: Generally more affordable compared to natural resins.

Versatility: Available in various molecular weights and viscosities, allowing for tailored applications.

Chemical Stability: Resistant to chemicals and environmental conditions, suitable for outdoor and industrial uses.

Summary

Hydrocarbon resins are indispensable in many industries, known for their adhesive properties, compatibility with a wide range of materials, and their role in enhancing the performance of adhesives, rubber, coatings, printing inks, and packaging materials. Their cost-effectiveness and adaptability make them a preferred choice for numerous manufacturing processes.

Contact:

Yuen Liang Industrial & Co., Ltd.

Website: www.ylresin.com

Email: tommyluu@ylresin.com

Tel: +886-7-6161787 Ext.224

Mobile/WhatsApp/Zalo: +886-952 715 676

Skype: luuman123

[legion-of-stationary-pkmn]

We are the Legion of Stationary!

We are the loyal generals of King Olly the Origami King and have found ourselves in this new world! Let us introduce ourselves one by one.

I am Jean Pierre (or Coloured Pencils if you're basic)! The Missile Maestro~! I am an artist, and ze whole WORLD is my canvas! I shall colour ze world with my coloured pencils! If you don't like my art then ze jokes on you!!!! I go by He/Him~!

Indeed, it is I, the Elastic Entertainer! Rubber Bands, the glorious star of the show!~ I use she/he/they depending on the day. Respect that or I'll stretch you thin!~

Heyyyy, I'm Hole Punch, but they call me the Disco Devil. Any pronouns 'cept she are fine for me. Stay off my dance floor and we're good.

Ayo, dey call me da Shifty Sticker, da one and only Tape. You use he/it fer me, got it? Stick around and I just might surprise ya, eheheheh.

Name's Scissors, also known as the Dual-Bladed Duelist, but you can just call me S for short. I recommend you stay away from my blades if you don't want to be cut to shreds, even without them I could still probably break your paper-thin spine, I'm a samurai after all. A fight isn't fun if a fight isn't fair. He/They pronouns for me.

There is also Stapler but they are a dog, and frankly cannot type. They are still here however! With that we hope to see you around, and remember one very important thing.

All hail the Origami King!

Hello there! This a blog of what would happen if the Legion of Stationary became fallers and now share a Tumblr Blog!

There are two mods on this blog! Mod Coco (Who will now go by Mod Bowser but is too lazy to change their tag) (@bowsers-keep) and Mod Hoodie (@hoodie-prince-kid)! Mod Bowser's Pronouns are Any/All and plays Colored Pencils/Scissors. Mod Hoodie's Pronouns are He/Him and plays Rubber Band/Hole Punch/Tape. We both run other blogs but this one was made over a shared Origami King brainrot <3

Note: Mod Coco is a Minor, Don't send us NSFW Asks

[zaozhaungjinfu]

Let’s talk about heat-resistant conveyor belts

1. The covering glue has high heat resistance and wear resistance, preventing cracks or hardening on the surface of the tape due to high temperatures.

2. After special heat treatment, the shrinkage of the belt core due to thermal aging is minimized.

3. It has good elasticity and is not prone to breakage. It solves the key problems of high saturation, poor adhesion and low inter-layer adhesion of ethylene-propylene rubber.

4. Low breakage rate, long service life, light belt body, strong heat resistance, and not easy to deform.

Therefore, heat-resistant conveyor belts have the advantages of high heat resistance, wear resistance, low breakage rate, and long service life.

Zaozhuang Jinflex has 50 years of experience in conveyor belt production. It is a conveyor belt manufacturer integrating production, research and development, and sales. It has passed ISO991 certification for many years.

https://www.jinflexhome.com