#biomass feedstock
Explore tagged Tumblr posts
poojagblog-blog · 18 days ago
Text
Chicago, June 20, 2024 (GLOBE NEWSWIRE) -- The global Synthetic Natural Gas Market size is expected to grow from USD 23.9 billion in 2024 to USD 68.4 billion by 2029, at a CAGR of 23.4% according to a new report by MarketsandMarkets™. Synthetic natural gas (SNG) is an artificially created substitute for natural gas, often made through a process called gasification, which transforms solid or liquid carbon-based materials into a methane-rich gas. SNG, is synthetically derived from various feedstocks including coal, biomass, and renewable energy sources, or municipal solid waste, mirrors natural gas in its properties and utility, suitable for purposes ranging from heating to power generation and transportation.
0 notes
itsgerges · 5 months ago
Text
Tumblr media
Best regards
 Can The Sun Rays Creation Process Depend On Saturn Motion?
or
or
or
Abstract
Paper Question
Can The Sun Rays Creation Process Depend On Saturn Motion?
The question tells us (If Saturn Is Not Found In The Solar System The Sun Rays Can Not Be Created)- If This is a fact- That proves we understand wrongly (completely) how the sun rays is created!
The question refuses directly The Sun Nuclear Fusion Theory – and tells us – The Sun Rays Is Produced by another Method – and
This another method depends on Saturn motion perfectly and without Saturn motion this method can NOT work and No Sun Rays Can Be Produced
The question answer can be summarized in 3 points
(Point No. 1) The Refutation Of The Sun Nuclear Fusion Theory
(Point No. 2) The Planet Motion Reason And Design
(Point No. 3) Saturn Effect On The Solar System Motion
Let's discuss these points in following…
(Point No. 1) The Refutation Of The Sun Nuclear Fusion Theory
There Are 7 Facts Refute The Sun Nuclear Fusion Theory…
Planet Motion Produces Energy
The gravitational waves are produced by the planets motions energies and NOT by the sun gravitational field (Moreover the sun does Not create a gravitational field)
The Gravitational Waves Can Move By Speed Of Light (C= 300000 km/s)
The Sun Rays Is Created By The Gravitational Waves Motions
The Sun Rays Creation Process Depends on A Relative Motion
The Sun Corona Temperature Is (5 million Kelvin) and the sun surface is 5800 Kelvin because the energy is NOT produced by The Sun Nuclear Fusion.
The Sun Data Depends On The Planets Data 
Let's summarize these facts in following
(Fact No. 1) Planet Motion Produces Energy
Any moving body produces energy (1/2 mv^2), the planet motion produces energy also, but where's the planet motion energy?
The planet doesn't store the energy in its body because it would raise this planet temperature and no planet temperature is raised by its motion- logically where can the planet motion energy be stored? In the space in waves form-
Means- the planet motion energy creates waves in the space
The space is similar to the sea of water, and the planet is similar to a fish swims through the sea of water- as we know- the fish moves by hitting the water by its body and by this action waves are created in the water- also we conclude the water moves by a velocity equal the fish velocity because of the reaction force-
Similar to that, the planet motion energy creates waves in the space- these waves are similar to the water waves, they move far from their planet and can be reflected- also we conclude the space waves move by a velocity equal the planet velocity-
Also–because the planets revolve around the sun in one direction- the planets motions energies waves move toward Pluto perpendicular on the revolution direction.
In Pluto orbit these waves are unified into one unified wave moves by the planets velocities total (9 planets velocities total is 176 km/s)
Pluto reflected this unified wave toward Venus and this wave revolves around the sun through the Earth moon orbit- because- all planets motion energy is stored finally in the moon orbit-
 And because the wave revolves around the sun through the moon orbit- the moon velocity is added to the total (the moon velocity = the Earth velocity) – by that
The velocities total be (176 +29.8 = 205.8 km/s)
Shortly-
The Planets Motions Energies Are Unified Together And Produce One Unified Wave Revolves Around The Sun Through The Earth Moon Orbit And This Unified Wave Moves By A Velocity 205.8 km/s.
(Fact No. 2) The Gravitational Waves Are Produced By The Planets Motions Energies And Not By The Sun Gravitational Field (Moreover The Sun Does Not Create A Gravitational Field)
I claim the space waves which I have described are the gravitational waves, the scientists called them wrongly supposing that these waves are produced by the sun gravitational field but this is NOT True – on the contrary- these waves are produced by the planets motions energies.
The previous analysis proves clearly that, the planet motion must create waves in the space- by that- I have a reason to claim that (the gravitational waves are produced by the planets motions energies)- and also the sun doesn't create a gravitational field – let's prove that in following to cause a confidence in my conclusion
The Sun Doesn't Produce A Gravitation Field  
The Sun Rotation Period is (25.4 days at equator) and (34.4 days at pole), that proves the sun has NO massive gravity (even it has no gravity equal any planet gravity otherwise it would rotate in one period of time)
No planet moves by the sun gravity (Newton Is Wrong).
The planet moves by its creation force- means-  the planet creation and motion should be done by the same one force because if two forces have effects on the same one planet, this planet would be broken
Mass gravity Can Not Cause any Motion- (Newton is wrong)– let's explain that -Mass gravity is a bond between 2 masses – the Earth and the moon are bond together by the mass gravity- They are similar to a lorry and its trailer– If a force causes the Earth to move the moon will move with the Earth– this is the effect of the mass gravity but the mass gravity can't cause any motion! Why? Suppose the moon moves by the Earth mass gravity- The moon motion produces energy (1/2mv^2)- and– From what source this motion energy will be provided? From the mass itself! means- If the Earth causes the moon to move that necessitates to decrease the Earth and moon masses by the motion energy– it's wrong definition for the mass gravity - the mass gravity creates a bond between two masses- and if a force causes the Earth to move the moon will move with the Earth, in this case, this force will provide the motion energy for the Earth and the moon– but No Motion can be done by the mass gravity.
(Fact No. 3) The Gravitational Waves Move By Speed Of Light (C= 300000 km/s)
This fact I provide by a direct proof – in following –
This Is Extraordinary: Gravity Can Create Light, All on Its Own
https://www.msn.com/en-us/news/technology/this-is-extraordinary-gravity-can-create-light-all-on-its-own/ar-AA19YL5d?ocid=hpmsnHYPERLINK "https://www.msn.com/en-us/news/technology/this-is-extraordinary-gravity-can-create-light-all-on-its-own/ar-AA19YL5d?ocid=hpmsn&cvid=620db4352aa943e2b454919a7b724604&ei=83"&HYPERLINK "https://www.msn.com/en-us/news/technology/this-is-extraordinary-gravity-can-create-light-all-on-its-own/ar-AA19YL5d?ocid=hpmsn&cvid=620db4352aa943e2b454919a7b724604&ei=83"cvid=620db4352aa943e2b454919a7b724604HYPERLINK "https://www.msn.com/en-us/news/technology/this-is-extraordinary-gravity-can-create-light-all-on-its-own/ar-AA19YL5d?ocid=hpmsn&cvid=620db4352aa943e2b454919a7b724604&ei=83"&HYPERLINK "https://www.msn.com/en-us/news/technology/this-is-extraordinary-gravity-can-create-light-all-on-its-own/ar-AA19YL5d?ocid=hpmsn&cvid=620db4352aa943e2b454919a7b724604&ei=83"ei=83
This new article states the gravitational waves can move by high velocity motion and can produce a light beam. 
Notice –
I Claim The Sun Rays Is Created By This Method (The Gravitational Waves Motions) And Not By The Sun Nuclear Fusion
But- I have proved, the gravitational waves are produced by the planets motions energies- how can the gravitational waves move by speed of light if they are produced by the planets motions energies? And If the gravitational waves move by speed of light how they can produce a light beam?
The fact is that
The planets motions use different rates of time- for that – the planets motions energies are produced based on different rates of time and the motion by speed of light is done by using different rates of time – let's explain how the unified wave (205.8 km/s) moves by speed of light relative to the sun point of space
W agreed that
There's one unified wave revolves around the sun through the Earth moon orbit and this wave moves by velocity 205.8 km/s relative to the sun point of space
This is A Relative Motion between two players (the unified wave) and (the sun point of space)
The two players use different rates of time which is
(one second of the sun clock = 1461 seconds of the unified wave clock)
The unified wave (205.8 km/s) moves in 1461 seconds a distance = 300000 km/s
But the sun clock moves only (one second) during these (1461 seconds of the unified wave clock) –means-
The distance 300000 km is passed in (one second) of the sun clock- by that
The different velocity between the unified wave and the sun motions is 300000 km/s = speed of light (C)
This analysis asks a new question (How Can The Planets Motions Use Different Rates Of Time?) this question is answered in Point (No. 2* the planet motion reason)
But there's one more question we left behind- let's remember it  
If the gravitational waves move by speed of light (300000 km/s) how can these waves produce a light beam? Let's answer in the following fact No. (4*)
(Fact No. 4) The Sun Rays Is Created By The Gravitational Waves Motions
The gravitational waves move by speed of light (C=300000 km/s) relative to the sun point of space- this idea is proved by the article states (the gravitational waves move by speed of light) BUT
How Can This Motion Produce A Light Beam?  The energy is reflected in the solar system, and the energy reflection causes to square the velocities, for that, the speed of light (C=300000 km/s) be squared (C^2) by the energy reflection- and the value (C^2) is the source of energy can produce the light beam
The reflection of energy and its effects are proved strongly in my paper   
The sun rays creation process provides three new features which are
The Gravitational Waves Move By Speed Of Light (C)
The Energy Reflection Squares The Velocities (C^2)
The Sun Rays Is Produced From (C^2) That Means The Sun Rays Is Produced By  A Relative Motion
(Fact No. 5) The Sun Rays Creation Process Depends on A Relative Motion
There are three basic critics against The Sun Nuclear Fusion Theory-
(First Critic) The Source Of Energy- while the solar system is so rich in the motion energy- the nuclear fusion theory invented strange source of energy to produce the sun rays and left the stored motion energy without using- logically- the energy can NOT be stored forever and should be used- The sun rays is the very good outlet for the stored energy- means- the sun rays should be produced from the planets motions energies which are stored in the space in waves form (the gravitational waves)       
(Second Critic) The Sun Rays Production Method- The sun rays are produced by the relative motion- means- the used technical method is the relative motion- the motion produces a relative motion with different velocity = speed of light (C= 300000 km/s) and by the reflection of energy this velocity be squared (C^2) and the sun rays is produced from this value (C^2)
The important thing here is (The Relative Motion) why? because this relative motion is found between two players (the unified wave motion 205.8 km/s) and (the sun point of space motion 1 km/s) – the light production process depends on the different velocity between the two motions (C=300000 km/s)- means- if this different velocity is decreased (NO Light Beam Can Be Created)
So the method needs the different velocity to be (C= speed of light =300000 km/s) and that necessitates the unified wave velocity to be (205.8 km/s) and the sun point of space to be (1 km/s) BUT there's NO any other point in the space moves by this velocity (1 km/s)- only – the sun point of space moves by 1 km/s – later I prove that 
Means- the different velocity (C=speed of light =300000 km/s) can be produced only between the unified wave motion (205.8 km/s) and the sun point of space
That tells- the light can be produced only on the sun point of space because this is the only one point in the space moves by velocity 1 km/s –
for that reason- the sun point of space is defined geometrically!
What does that mean (The Sun Point Is Defined Geometrically)?
The designer used many mathematical calculations and geometrical rules to define the sun position in the sky and the sun creation data- let's give one example
(The sun diameter / the moon diameter) = (Earth orbital distance/ Earth moon dist)
The previous equation enables us to see the sun disc = the moon disc and that causes the total solar eclipse to be occurred- but– why the diameters rate = the distances rate? 
Because the designer made all mathematical calculations to guarantee the velocity of the sun point of space to be only (1 km/s) and Never be faster
Let's see more data behind the total solar eclipse
4900 mkm (Jupiter orbital circumference) = 1.39 mkm (the sun diameter) x 3475 km =12104 km x 406000 km = 12756 km x 384000 km = 6792 km x 2 x 363000 km
3475 km      = the moon diameter                 12104 km    = Venus diameter
12756 km    = The Earth diameter                6792 km      = Mars diameter
 363000 km, 384000 km and 406000 km are the distances between the Earth and its moon in perigee, orbital distance and apogee radiuses respectively
We see how the data is designed geometrically accurately- why the data is created by this accurate system? because the designer aimed by all means to make the velocity of the sun point of space to be 1 km/s and never moves by any faster velocity
We remember (Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s) this fact is proved by my planet diameter equation-
Here also- the sun diameter is defined geometrically in proportionality with many planets to guarantee the velocity of the sun point of space be only (1 km/s)
This argument is so powerful against the nuclear fusion theory, because
The Sun Data Proves The Sun Rays Is Produced By (A Relative Motion) and not by nuclear fusion- the designer had a necessity to create these proportionalities between the sun position and data on one side with the planets data on the other side- the required task was (to create a system guarantee the velocity of the sun point of space to be 1 km/s and never moves by faster velocity) – this is the cornerstone in the sun rays creation process because the rays is created by A Relative Motion- based on different velocity = 300000 km/s
This velocity is the method by which the sun rays is created and If This Velocity Is Decreased No Light Beam Can Be Produced.
Notice
The sun circumference =4.37 million km and the sun rotation period at equator is 25.4 days – if we calculate the velocity of this motion (4.37 million km /25.4 days) the velocity be = 2 km /sec
This is a strong proof for my theory- and we note that- the machine uses the velocity 1 km/s and the sun velocity (2 km/s) forced the machine to make (double for all values) means- for example- the sun rays is created not by (90000 million km) but created by (180000 million km) as I explain later- means – this change in velocity from (1 km/s) to (2 km/s) has great effect on the data but the machine can still produce the light beam- shortly- the sun rays is created by this relative motion with different velocity = C= speed of light = 300000 km/s
(Third Critic)
The sun corona temperature is (5 million Kelvin) but the sun surface is 5800 Kelvin
This data proves strongly my theory – where
The sun rays is NOT produced by the sun nuclear fusion – means – the energy is NOT produced from the sun body – BUT
The energy is produced by the planets motions energies and for that the corona has energy more than the sun body- because the energy comes from out of the sun into the sun- shortly- the energy out of the sun is greater than the energy inside the sun because the sun does NOT produce this energy- this energy is produced by the planets motions energies.
(Fact No. 6) The Sun Corona Temperature Is (5 million Kelvin) and the sun surface is 5800 Kelvin because the energy is NOT produced by The Sun Nuclear Fusion.
This fact is told just before – the sun corona temperature is a strong proof supports my theory tells (the sun rays is created by the planets motions energies total and not by the nuclear fusion)
(Fact No. 7) The Sun Data Depends On The Planets Data 
As We Have Seen In The Total Solar Eclipse Data, the sun data is in proportionality with the planets data proves the sun rays is created by the planets motions energies- But – not only this data
The sun all data is created depending on the planets data – let's see one more example
243/224.7= 29.53/27.3 = 27.3/25.4 = 1.0725
243 and 224.7 days Venus rotation and orbital periods respectively
29.53 and 27.3 days The moon day and rotation periods respectively
25.4 days = the sun rotation period at equator
The data shows clear harmony as if the sun data very similar to the planets data
(Point No. 2) The Planet Motion Reason And Design
A- The Solar System Creation Theory
The solar system is created from one energy- this energy is provided by one light beam its velocity is 1.16 million km per second
From this energy the space is created firstly and the light energy is consumed in the space creation and the rest energy is found in One Wave moves by speed of light (C=300000 km/s) – from this one wave the planets are created-
The creation is done in 2 stages
(First stage The Space Creation)
The original light beam (its velocity 1.16 million km per second) creates the planets orbits before any planet creation, starting from Mercury to Pluto, because of the orbits creation, the light energy is consumed and its velocity be 300000 km/s
We understand this is one light beam- its velocity was 1.16 million km per second and after the space creation this light velocity be 300000 km/s
(Second stage The Planets Creation)
The planets are created from this one wave moves by speed of light (C=300000 km/s)
NOTICE
There are strong proves prove a coherence of light is done between the light 1.16 million km per second and the light 300000 km/s- let's see this idea deeply
The original light beam its speed (1.16 million km per second) started its motion from Mercury orbit to Pluto orbit (Mercury orbit is the light motion origin point) – and this light beam created all orbits before any planet creation- and the light lost its energy in the space creation and the rest energy is one light beam move by the known speed of light is (C=300000 km/s)
The other light beam is the rest energy- it moves by the known speed of light (C=300000 km/s) and it moves in the reflected direction from Pluto toward Venus and Mercury-
Now –there's a coherence of light between these two light beams- the coherence is proved BUT we should ask (how can this coherence be occurred)? Because the original light (1.16 million km/s) is consumed and its energy is used already and the rest energy be this light its speed is (300000 km/s) - HOW can the light (1.16 million km/s) meet the light (300000 km/s)??
Imagine we have (116 dollars) and we spent all money except (30 dollars)- how can this (30 dollars) meet the original money (116 dollars)??
Let's try to answer
Suppose the light beam (300000 km/s) moves in the reflected direction (in the space) and also (in the time) – that can enable the light (300000 km/s) to move into its past and meet the original one (1.16 million km/s) in the past and the coherence can be done there in the past- and we see the coherence results and effects on the solar system-
Means – the light (300000 km/s) moves into its past and found the original light (1.16 million km/s) in the past and the coherence could be done there in the past
Please note- this analysis tells us the light can move on the time axis means can move into the future and into the past- but the matter can Not do that- I explain the reason in my paper (No. I-6)
Shortly- we have a proof for the motion on the time axis and we can create the time machine by this method and the light will be our tool which can move into the past to get pictures and data from the past to us-  
Now
Let's see how the planets are created
B- The Solar Planets Creation
We know- The solar system is one wave moves by speed of light (C=300000 km/s)
Through the space- (till now NO any planet is created)  
Now -The Solar System needs To Create A Stationary Point Its velocity Zero relative to the moving wave its velocity is 300000 km/s
This is the basic information in the solar system design-
The solar system needs to create a stationary point relative to the wave motion- by that – two velocities will be found which are (v1= the wave velocity 300000 km/s) and (v2= Zero= the stationary point relative to the wave motion)–these two velocities produce a relative motion with different velocity 300000 km/s–
Notice – the stationary point velocity is 1 km/s (= Zero approximately)
Notice– The solar system is one wave moves by speed of light (C=300000 km/s), or the solar system is carried on light beam moves by speed of light (C=300000 km/s),
Everything in the solar system is carried on this one light beam motion- and nothing is static- No stationary point can be found here-
This is similar to ships are found on the sea- nothing is stopped- all ships move and can't stop- because the motion is done forcedly by the sea waves.
The stationary point will be similar to the whirlpool (vortex) found on the sea page- 
We see the whirlpool doesn't move with the sea waves- for that the whirlpool can be considered as a stationary point relative to the sea waves.  
But
The solar system needs to create the stationary point
Now – let's try to create this stationary point in following
The solar system uses two procedures to do that,  
The first procedure
The wave its velocity 300000 km/s revolves around a point in space (any point in space), the revolution motion creates 2 equal velocities on both sides of the revolution- the two velocities are equal in value and opposite in direction- their total be equal Zero-means- the revolution motion creates One Stationary Point in the center of the revolution. 
The second procedure
The previous idea is correct- but –the velocity 300000 km/s is a huge one and to decrease it to Zero velocity this is a complex process– for that- the wave (300000 km/s) created small waves with low velocities to use them as steps to decrease the velocity to Zero- the small waves are The Planets- (The planet is a small wave moves by low velocity relative to the mother wave its velocity 300000 km/s) 
Why Are These Small Waves Required?
Because the velocity 300000 km/s is decreased to Zero by using these small waves and their low velocities- the low velocities are used as steps to decrease the wave velocity (300000 km/s) to be (Zero)- this process decreases the velocity gradually from 300000 km/s to Zero depending on these small waves velocities (the planets velocities)  
Means- the planets are created for this process to decrease the wave velocity from 300000 km/s to Zero- and The Planet Is A Small Wave Moves By Low Velocity  
Shortly – the solar system has one complete system of velocities, Starting from Zero to 300000 km/s where the planets velocities are the steps between the two velocities –
Please note clearly this idea- because-
The solar system has one motor for all motions which is the wave motion by speed of light (300000 km/s) No any other motor is found in the solar system
The planets are similar to carriages in one train but the train engine is the light motion by that the only motor under all motions in the solar system is the wave motion (speed of light 300000 km/s)
So, we have to ask- how can any planet move by a velocity Less than (300000 km/s)?
Because – The Planets Use Different Rates Of Time-
The rates of time is created based on the velocities rates –
For example-
Mercury velocity =1.6 Earth velocity, for that, one hour of Mercury clock= 1.6 hours of the Earth clock and by that Mercury and the Earth move equal distances in equal periods of time. 
This is very important fact because – the light moves carrying all planets with it- Now the light moves (one motion) and passes (one distance) in (one period of time)
All planets will move (this same motion) and pass (this same distance) in (this same period of time)- but
We need different velocities for the planets to work as steps to decrease the velocity (300000 km/s) to Zero (Stationary point)- means- it's essential to have (different velocities) and that causes the using of the rates of time inevitable and essential method to enable the solar system to do its motion.
C- The Rate Of Time Use
(i)
The Rate Of Time Effect
The rate of time controls the moving energy rate-
For example (One Hour Of Mercury Clock = 24 Hours Of Pluto Clock)
What does that mean?
It means, Pluto motion energy (for 24 hours) can be used by Mercury in (one hour)
Here - the solar system is similar to a river of water moves from a point to another and the rate of time defines the amount of the transported water (energy)
In more details
The energy is transported among the planets and the amount of energy is defined by the rates of time- because- the energy transportation necessitates to transport the motion among the planets and the motion transportation caused to transport the rates of time among the planets-
(ii)
The Rate Of Time Use
We agreed that, the solar system has one motor only which is the wave moves by speed of light (C=300000 km/s)- means- no velocity can be less than speed of light unless it depends on a rate of time –
Means- all planets velocities are created based on rates of time- that causes the rates of time to be used in all motions in the solar system  
Let's remember,
Planet motion energy creates waves in the space- we remember the accurate vision- we observed one swimming fish, the fish hits the water by its tail and swims, that creates a wave in the sea and this wave moves by the fish velocity because of the reaction-
Similar to that, Mercury (47.4 km/s) moves and its motion energy waves are created and these waves move by Mercury velocity (47.4 km/s) –BUT- Mercury velocity is created based on a rate of time- that causes the waves motions use rates of time-   
I try to show how the gravitational waves motions depend on rates of time
For more clear vision
We have to consider that the solar system has one motor only and this motor is the wave moves by speed of light (C=300000 km/s) for that any motion in the solar system with velocity less than speed of light (must depend on rates of time)  
The rates of time = the velocities rate –
Let's remember out example
Mercury velocity =1.6 Earth velocity by that (One second of Mercury clock = 1.6 seconds of the Earth clock)– by this rate of time Mercury and the Earth move equal distances in equal periods of time -
We understand the reason- where
The planets are geometrical points on the same one light beam- and this light beam moves carrying all planets with it- and
The light moves one motion, passes one distance in one period of time, for that, all planets move this same motion, pass this same distance in this same period of time
(iii)
The Solar Planets Basic Rates Of Time
Let's remember the basic rates of time
(one hour of Mercury clock = 24 hours of any planet clock) and
(one hour of Mercury clock = 576 hours of Saturn clock)
That causes
(one hour of any planet clock = 24 hours of Saturn clock)
This rate of time is defined by Mercury motion effect And
The major rate of time between the planet and light motion is
(one second of light clock = one solar day of the planet clock)
This rate is a complex one because there are 2 velocities of the light (as I proved) 
The original velocity 1.16 million km per second and the known velocity 300000 km/s
Means
(one second of light 1.16 mkm/s   = one solar day of the planet clock) and
(one second of light 300000 km/s = one solar day of the planet clock)
That causes the rate of time (1=24) to be so necessary to create the harmony between the planets and light motions- for that this rate (1=24) is used by Mercury motion 
Notice
The rate of time is defined basically by the planets velocities as explained before – for example - Mercury velocity = 1.6 the Earth velocity- means – one hour of Mercury clock = 1.6 hours of the Earth clock
But the solar system energy is reflected three times in the solar system, and each reflection causes to square the velocity, by that, the rate of time (v1/v2) be growing to be (v1/v2)^3
That explains why the planets orbital periods rate = (their velocities rate)^3
Also all other planets data is worked as rates of time-
D- The Unified Wave Moves By Speed Of Light
Let's remember out equation
300000 km = 7.1 x (205.8)^2 where
7.1 is Lorentz length contraction effect for velocity 297000 km/s (= 0.99 C)
205.8 km/s = the 9 planets velocities total (176 km/s) + the Earth moon velocity
(The moon velocity =29.8 km/s = the Earth velocity because they revolve together)
Why does the data use the squared value (205.8)^2?
We know the answer- but - Let's remember it
The planets are geometrical points on the same light beam and move with its motion- for that- the planets velocities rates creates rates of time– for example-  Mercury velocity = 1.6 the Earth velocity- that means – one hour of Mercury clock = 1.6 hours of the Earth clock- as I have explained before 
Now- the velocity (205.8 km/s) move relative to the stationary point its velocity Zero (The Sun) and creates a rate of time (1 second = 205.8 seconds) –
(One Second Of The Unified Wave Clock = 205.8 Seconds Of The Sun Clock)
But – the energy is reflected in the solar system (I proved in the paper),
The energy reflection reflects the players – means
(one second of the Sun clock = 205.8 seconds of the unified wave clock)
means (one second of the sun clock = 205.8 seconds of any planet clock) –
Now during one second of the sun clock, the wave clock needs 205.8 seconds while the wave moves by a velocity 205.8 km/s- means –
During one second of the sun clock, the wave moves 42253 km = 300000 km /7.1
By that the velocity is 42253 km/s which is equivalent to the speed of light
Notice
The velocity 42253 km/s is equivalent to the speed of light 300000 km/s because of the length contraction effect rate (7.1) – because
The reflection of energy causes to reflect the geometrical effects and the rate 7.1 which caused (length contraction) will cause (length increasing)
The length contraction and increasing both effects are produced by the same one motion but the reflection of energy causes to reflect the geometrical effects.
E- Planet Velocity Analysis
DATA
My 5th equation (v1v2=322)- the planets velocities prove it–let's see that in following  
322 = 47.4 km/s (Mercury velocities)  x 6.8 km/s  (Uranus velocities)                    
322 = 35 km/s  (Venus velocity) x 4.7 km/s (Pluto velocity) x 2             
322 = 29.8 km/s (the Earth velocity) x 5.4 km/s (Neptune velocities) x 2      
322 = 24.1 km/s (Mars velocity) x 13.1 km/s (Jupiter velocity)               
322 = (17.9 km/s)^2 (Ceres velocity) (Max error 2%)
DATA ANALYSIS
The previous data tells the planets velocities are defined by two features
(1st Feature)
The planets velocities are complementary one another –means - each planet velocity is complementary with another planet – means– The planets velocities are defined in pairs and not in single planets. 
(Notice, the inner planets orbital inclinations are defined by the rule (v1/v2), for example, Mercury orbital inclination 7 deg = Mercury velocity 47.4/ Uranus velocity 6.8- that proves the effect of the rule (v1v2=322) on the planet motion)
(2nd Feature)
Why the constant is 322 because
1160000 seconds = 322 hours – means- there's a light velocity = 1.16 million km /s and this light moves for one second passes 1160000 km but we see this distance as a period (1160000 seconds =322 hours)- and - the planets velocities are defined based on this velocity 1.16 million km /s
Discussion
Ceres velocity tells the idea - Ceres is used as the origin point - as a result the outer planets be complementary with the inner planets – for that the rule (v1v2=322) controls the planets velocities.
(a)
The planets velocities are created based on one design- Ceres velocity is used as the origin point for this design
(b)
Shortly
Mercury (47.4 km/s) moves during 6.8 hours a distance             = 1160000 km 
Uranus (6.8 km/s) moves during 47.4 hours a distance               = 1160000 km 
And
Mars (24.1 km/s) moves during 13.1 hours a distance                = 1160000 km 
Jupiter (13.1 km/s) moves during 24.1 hours a distance             = 1160000 km 
(error 2%) - And
Earth (29.8 km/s) moves during 2 x 5.4 hours a distance             = 1160000 km 
Neptune (5.4 km/s) moves during 2 x 29.8 hours a distance        = 1160000 km 
And
Venus (35 km/s) moves during 2 x 4.7 hours a distance             = 1160000 km 
Pluto (4.7 km/s) moves during 2 x 35 hours a distance               = 1160000 km 
(error 2%)
Notice - Saturn (9.7 km/s) moves during 33.2 hours a distance = 1160000 km 
(between 33.2 and Venus velocity 35 km/s the error 5%) 
(c)
The planets velocities definition depend on the speed of light 300000 km/s
As we have seen before in the equation
300000 km = 7.1 x (205.8)^2
Here we see the planets velocities are defined based on two velocities which are – the speed 1.16 million km per second and the light speed 300000 km/s- that's one proof among many others which prove the coherence of light is done between the light 1.16 million km per second and the light 300000 km/s
Why is it necessary to review the planet velocity analysis here? 
Because the planet velocity analysis proves the sun is created after all planets creation and motion -Let's see that in the next point
F- The Sun Is Created After All Planets Creation And Motion (Proves)
We analyzed the planet velocity definition before, let's remember its basic feature  
DATA
We remember the rule (v1v2=322) (my 5th equation)– let's prove it
322 = 47.4 km/s (Mercury velocities)  x 6.8 km/s  (Uranus velocities)                    
322 = 35 km/s  (Venus velocity) x 4.7 km/s (Pluto velocity) x 2             
322 = 29.8 km/s (the Earth velocity) x 5.4 km/s (Neptune velocities) x 2      
322 = 24.1 km/s (Mars velocity) x 13.1 km/s (Jupiter velocity)               
322 = (17.9 km/s)^2 (Ceres velocity) (Max error 2%)
DISCUSSION
The data tells
The Planets Velocities Are Defined Based On One Design
The planets are added in pairs in the solar group- means- No single planet can be added to the solar group
Now we have to ask
Can We Add A New Planet To The Solar Group?
Let's answer in following
I add a new planet after Pluto
I suppose the new planet orbital distance to be =7000 million km
This new planet velocity will be 4.3 km/s (We can define it by kepler law)
Now we need the complementary planet because of the rule (v1v2 =322)
(322 =4.3 x 75), means, the complementary planet velocity is 75 km/s   
Where can we find a planet its velocity 75 km/s? this planet must be in the distance between the Sun and Mercury –
This planet orbital distance should be 23.2 million km
(57.9/23.2) = (75/47.4)^2  where
(57.9 million km = Mercury Orbital Distance) and (47.4 km/s) Mercury velocity
Shortly –
It's hard to add any planet in the distance between Mercury and the Sun- means- we can't add any new planet to the solar group because of the Sun existence.
But-
How Could The Found Planets Be Added To The Solar System?
The Sun is created after all planets creation and motion- means – after all planets be in their orbits the Sun is created- In details-The planets were created in their orbits and revolve around a point of space, before the sun creation, and later the sun is created in this point of space around which the planets revolve
Because - technically-  the Sun existence prevents to add any new planet to the solar system and also the Sun existence prevents any planet to change its orbit
(For example- Mars original orbit was between Mercury and Venus and Mars had migrated to its current orbit before the Sun creation And Mars couldn't return to its original orbit because of the Sun existence ) (Mars Migration is proved in the paper) 
Notice
This analysis is another proof for my theory tells (The Sun Rays Is Created By The Planets Motions Energies And Nut By The Sun Nuclear Fusion)
Shortly
The sun rays can NOT be created without the solar planets because the sun rays are created from the planets motions energies – logically the planets are found and moving before the sun creation-
(Point No. 3) Saturn Motion Effect On The Solar System Motion
Let's remember our question
Can The Sun Rays Creation Process Depend On Saturn Motion?
The question tells us (If Saturn Is Not Found In The Solar System The Sun Rays Can Not Be Created)- Let's ask (what's Saturn role in the solar system motion?)
The main rates of time are
(one hour of Mercury clock = 24 hours of any planet clock = 576 h of Saturn clock)
That causes (one hour of any planet clock = 24 h of Saturn clock)
This rate of time is changed slightly by the velocities effect to produce the nest rate
205.8 km/s = 9.7 km/s (Saturn velocity) x 21.4 second
205.8 km/s = the planets velocities total
The data tells
(one hour of any planet clock = 21.4 h of Saturn clock)
And Saturn created its rotation period (10.7 h) based on this rate (21.4 = 2 x 10.7 h)
The data shows- Saturn has the smallest rate of time in the solar system and by that Saturn moves more than any other planet- in fact
In the same period - Saturn moves a distance = all planets motions distances total 
Shortly -the Sun rays is created by the planets motions energies BUT Saturn motion alone provides (50%) of all this energy – that makes Saturn the most important planet in the solar system -and because of that- Saturn motion provides the greatest rate of time in the solar system and based on this rate of time the sun rays is created
Shortly
The Sun rays creation depends directly on Saturn motion because Saturn provides (50%) of all provided energy for the sun rays and because Saturn motion creates the rate of time based on which the energy can be stored to produce the sun rays
Saturn is the motor behind the sun rays creation process – I analyze Saturn data in details in point no. (3) of the paper because Saturn data proves that – the planets motions causes to create the sun rays clearly
The Paper hypotheses
The paper provides 4 hypotheses with their explanations and proves – let's provide them in following
Hypothesis No. (1)
The space is created from one energy and this energy is provided by a light beam moves by a speed 1.16 million km per second – the speed is registered in the created space proves the speed is a fact.
Hypothesis No. (2)
The Gravitational Waves Are Produced By The Planets Motions Energies And Not By The Sun Gravitational Field– Moreover- The Sun Does NOT Produce A Gravitational Field And It Has No Massive Gravity- 
Hypothesis No. (3)
Mars original orbit was between Mercury and Venus and Pluto was The Mercury Moon (Pluto size was equal Mercury size) But these two planets had migrated from their original orbits as a result for a collision- the planets migration caused a risk for the solar system geometrical design- Uranus and Jupiter the Two planets worked to repair the solar system design– that caused Jupiter orbit to be the main orbit in the solar system design- Jupiter orbit proves the speed 1.16 million km per second is a fact.   
Hypothesis No. (4)
The Sun Is a phenomenon created by the planets motions
The sun rays is created from the gravitational waves motions energies and the gravitational waves are produced by the planets motions energies-
Based on that 
The Sun Is A Phenomenon Created By The Planets Motions
And
The Sun Is NOT Doing Nuclear Fusion To Produce Its Rays- instead- The Planets Motions Energies Total Is Used To Produce The Sun Rays
The Sun Is Created After All Planets Creation And Motion –
Means
The Planets Are Created And Moving In Their Orbits Around A Point Of Space Before The Sun Creation- And The Sun Is Created On This Point Of Space around which the planets revolve –
And
No Planet moves by The Sun Gravity (Newton is Wrong) –
And
The Sun Doesn't Produce A Gravitational Field (Einstein Is Wrong)
And
The Sun Is A Phenomenon Created By The Planets Motions– means-The Sun creation and death depends on a cycle – means – after this current sun death another sun will be created for the solar system.
The Hypotheses Explanation
The abstract provides the hypotheses explanation and the paper provides their proves and discussions- In following the hypotheses will be explained in details 
NOTICE –
The creatures and all matters on the Earth are created from the sun light energy and the sun light speed is 300000 km/s, because of that, the creature realization is limited to the speed 300000 km/s and can't realize the original speed (1.16 million km per second) that means the speed 300000 km/s is a limit for the creatures realization and not for the universe design.   
Hypothesis No. (1)
The space is created from an energy and this energy is provided by a light beam moves by a speed 1.16 million km per second – the speed is registered in the created space which proves the speed is a fact
The Hypothesis Explanation
I- The Space Is Created By One Light Beam Energy- And This Light Beam Speed Is 1.16 million km per second
I-1 Preface (the main idea)
I-2 The Space Creation Method (the distances are one network)
I-3 Light Coherence between light (1.16 million km /s) and light (300000 km/s)
I-4 The Matter definition (based on my planet diameter equation)
I-5 The Planets Creation
I-6 Can The Time Machine Be A Fact?
The Hypothesis Proves
I-7 The Proves Logic Analysis
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
I-9 Planets Orbits Are Defined By A Motion Its Speed = (1.16 million km /s)
I-10 Jupiter distances are defined by a motion by a speed = (1.16 million km /s)
I-11 The Solar System Geometrical Design Proves The Hypothesis
I-12 The Solar System Distances Analysis Prove The Hypothesis
I-13 Deep Analysis For The Planets Orbits
1-14 Light defines each planet orbital period
I-15 Can Planet Diameter Be Used As A Period Of Time
I-16 Mercury Orbit Analysis
I-17 The Planets Data Is Created By The Light Motion Directly
I-18 Light Defines Each Planet Rotation Period
I-1 Preface (The Main Idea)
The solar system (planets and distances) is created from one energy and this energy is provided by one light beam and this light beam moves by speed (1.16 million km/s)
The space is created before the planets creation-
Let's write the whole story in following
The light beam (1.16 million km per second) started its motion from Mercury orbit moves toward Pluto orbit– by that– we consider Mercury orbit is the origin point-
Now- we should notice- No planet is created yet- the motion from Mercury orbit to Pluto orbit defines the motion direction- and No planet is created before this motion end nor during this motion- the planets will be created after this motion is finished means when the light 1.16 million km per second reaches to Pluto (orbit)- after this event – the planets will be created –as I will explain later  
Notice
The light (1.16 million km per second) creates the distances by its motion- means- the light moves from Mercury point to Venus point– the distance from Mercury to Venus was not found and is created only by the light motion through it for first time- means – before the light motion this distance was NOT found- It's found after the light moves through this distance for first time-    
This is similar to the blood motion through the arteries, the blood creates these arteries and the blood moves through these arteries, but the blood created these arteries with its first motion and that needed energy- but – after the arteries creation the blood move through them without any energy is required- means- the first motion is the most important one because by it the arteries are created
Shortly- The space is created from the energy of this light beam its speed 1.16 million km per second – NOW- after the Space creation- the light beam energy is decreased because of the energy consumption in the space creation process- and the rest energy is one light beam its speed is (C=300000 km/s =the light known speed) – But - We understand that- it's the same one light beam- its speed was 1.16 million km /s before the space creation- and the light created the space and that caused to consume the light energy and that caused to decrease the light speed to be 300000 km/s
Shortly- the light beam started its motion from Mercury (orbit) with speed 1.16 million km /s and reaches to Pluto (orbit) with a speed 300000 km/s because of the energy consumption in the space creation process  
Let's give example to explain this idea
Imagine we create A Sea Of Water- we use energy to create this sea of water- now we have some energy and we use this energy to create this sea of water- BUT- our energy is NOT spent completely But there's a small part still rest with us – this small part of energy is used to create one wave moves through this sea and this wave speed is 300000 km/s (I suppose the space is similar to the sea of water)
Now – the rest energy is found in one light beam its speed 300000 km/s and this light beam is found NOW in Pluto Orbit – and this light beam will be reflected from Pluto orbit toward the inner planets– means- the rest energy will move in the reflected direction to the original light motion direction.
This idea will be explained in details in the next point- shortly
The light beam (300000 km/s) will be reflected from Pluto toward the inner planets
AND  the light 300000 km/s will meet the original light beam (1.16 million km per second) in the origin point (in fact – beside the origin point) and there's a coherence of light is done between the light beam (300000 km/s) and the light beam (1.16 million km per second) – this coherence of light is proved strongly- we have to ask (how can that be possible while the light beam 1.16 million km /s is consumed and the new light beam 300000 km/s is the rest energy? how this light beam (300000 km/s) can meet the original one (1.16 million km per second)? in points no. (I-3) and no.(I-6) I answer this question.
Notice (1) I suppose the rest energy is a light beam its speed is (C=300000 km/s) but this idea is for simplicity- the rest energy can be in any wave form its speed (C=300000 km/s) – no necessity to be in visible light beam form
It's simply energy moves by the known speed of light (C=300000 km/s)
Notice (2)
All Planets Orbits Are Defined Before Any Planet Creation-
The light used the distance from the sun to Pluto as one area and create one geometrical design for this area before any planet creation 
Notice (3)
The planets are created from the rest energy its speed (300000 km/s) – means- the space is created by the light 1.16 million km per second and the energy is consumed in the space creation and the rest energy is one light beam its speed 300000 km/s (or one wave moves by the known speed of light C=300000 km/s) – the solar planets are created from this one wave its speed 300000 km/s and that means all planets orbit are created and defined before any planet creation
Notice (4)
The Sun Is Created After All Planets Creations And Motions
The sun is a phenomenon created by the planets motions energies total
The sun doesn't produce a gravitational field and doesn't have massive gravity
Logically – No planet moves by the sun gravity
(The Planet Moves With The Energy From Which The Planet Is Created – Newton is wrong- later we discuss the proves)
Notice (5)
The child (fetus) inside his mother is created by the blood motion- the blood motion creates arteries for this child and through these arteries the blood moves also but the arteries themselves are created by this same blood motion- Similar to that- the distances are created by the light motion energy and the light moves through these distances also but originally these distances themselves are created by the light motion energy-  means the distances creation is done with the first time of the light motion through them - that required energy- but after the distances are created no more energy is required- the light (or planet) can pass simply through these distances
I-2 The Space Creation Method (the distances are one network)
Data
778.6 = 1.16 x 671
721    = 1.16 x 621
629    = 1.16 x 543
543    = 1.16 x 468
5906  = 1.16 x 5127
These numbers are distances in (million km)
778.6, 721, 671, 629, 551 are Jupiter distances to the sun, Mercury, Venus, Earth and Mars respectively- 5906 and 5127 Pluto distances to the sun and Jupiter respectively     
468 = 936 /2 where (940 million km = the Earth orbital circumference)
Discussion
(1)
The previous data tells us how the light beam motion creates the distances-
Simply the light uses a distance as (a period of time) and travels through this period another distance- that can be understood clearly from Jupiter distances- let's look deeply as possible
The light beam (1.16 million km per second) uses the period 629 seconds to pass a new distance = 729 million km (Mercury Jupiter distance is 721 million km error 1%) – where 629 million km = Jupiter Earth distance
Also  
The light beam (1.16 million km per second) uses the period 671 seconds to pas a new distance =778.6 million km (Jupiter orbital distance) 
where 671 million km = Jupiter Venus distance
by this method the light creates the distances based on each other- and that makes all distances to be created depends on one another and that makes all distances in the solar system to be One Network where all distances are created based on the same One Geometrical Design
(2)
The data shows the creation method- and we understand that- the distance 551 million km (Jupiter Mars Distance) is created firstly and the light (1.16 mkm/s) used this distance as a period of time (551 sec) and the light travels during this period a distance =(639 million km where 629 million km is Jupiter Earth distance error 1.5%) and then the light uses the new distance (629 mkm) as a period of time (629 sec) and the light travels during this period a distance = (729 million km – where 721 million km = Mercury Jupiter distance – error 1%)
The data shows the method clearly and we understand the light original motion started from Mercury orbit to Pluto orbit because the distances are created based on one another in that direction of motion as explained clearly
(3)
New data NO. (1)
2723 sec x 2 x 300000 km/s = 1622 million km – where
2723 million km = Uranus Earth Distance
1622 million km = Uranus Neptune Distance
The data shows- the light beam its speed (C=300000 km/s) is in proportionality also with the created distances but this proportionally is found in Reflected Direction
Logically, The light can NOT move from Uranus to Neptune and after that the light returns to move from Uranus to the Earth- it's simply reflected direction  
The distances are NOT created by the motion of this light beam (300000 km/s) – but the distances are created by the motion of the original light beam (1.16 million km per second) but the proportionality between the distances with the light (300000 km/s) is found because there's a proportionality between the original one (1.16 million km per second) and this light beam (300000 km/s) – AND 
Because the light (300000 km/s) moves in the reflected direction of the original light beam (1.16 million km per second) that causes the proportionality between the distances and the light (300000 km/s) be in a reflected form
New data NO. (2)
2094 sec x 300000 km/s = 629 million km
2094 million km = Uranus Jupiter distance
629 million km   = Earth Jupiter distance
The light (300000 km/s) moves in reflected direction- for that- the distance 2094 million km is used as a period of time to pass a new distance (629 mkm)
The data proves the idea clearly
Notice (1)
The proportionality between the light (1.16 million km/s) and the light (300000km/s) will be discussed in point no. (I-3)
Notice (2)
In Point (**) I prove the gravitational waves are produced by the planets motions energies- and I prove that – the planets motions energies move toward Pluto and this energy is reflected from Pluto toward Venus- this fact is proved by powerful data and proves- for that – I don't explain in details the light motion trajectory from Pluto toward the inner planets because this motion trajectory is studied in details in the hypothesis No. (2) of this discussion- understandable that- the planets motions energy trajectory is the same trajectory the light moves through it – means this trajectory is studied in details and powerful proves in point no. (**)
Notice (3)
Jupiter Distances Analysis shows that Jupiter orbit is the central orbit for the light (1.16 million km per second) based on which all planets orbits are defined.
But – this is not the first creation case –
The light (1.16 million km per second) created the planets orbits based on each other starting from Mercury orbit moves toward Pluto orbit – this is the fist creation case – and this fact is proved strongly in point no. (I-9*)
BUT
Mars had migrated from its original orbit (Mars original orbit was between Mercury and Venus) and Pluto had migrated also (Pluto Was The Mercury Moon revolves around Mercury and Pluto size was equal Mercury size)
The planets migration caused a serious risk for the solar system geometrical design- Uranus was the first planet tried to repair the solar system geometrical design and to save it- by that
Uranus created a vertical effect on Jupiter orbit to fix Jupiter in its orbit and prevent it to migrate with the migrant planets- and based on Jupiter orbit the other planets orbits are modified – that supported the solar system original design and saved it which causes to protect the geometrical design from the destruction.  
As a result
That causes Jupiter orbit to be the most important orbit in the solar system- the paper third hypothesis explains the planets migration and Jupiter orbit analysis is done with the solar system design analysis (I-11*)
I-3 Light Coherence between light (1.16 million km /s) and light (300000 km/s)
(1)
The Coherence Of Light
The previous explanation told us that we have 2 light beams-
The original light beam its speed (1.16 million km per second) and it started its motion from Mercury orbit to Pluto orbit (where Mercury orbit is the light motion origin point) – and this light beam created all distances in the solar system and lost its energy in the space creation process and the rest energy is one light beam its speed is (C=300000 km/s)
The other light beam is the rest energy- its speed is (C=300000 km/s) and it moves in a reflected direction from Pluto toward Venus and Mercury-
Now – we have a coherence of light between these two light beams- the coherence is proved by powerful proves BUT firstly we have to ask (how can this coherence be occurred)? Because the original light (1.16 million km/s) is consumed and its energy is used already and the rest energy is this light its speed is (300000 km/s) - HOW can the light (1.16 million km/s) meet the light (300000 km/s)??
Imagine we have (116 dollars) and we spent all money except (30 dollars)- how can this (30 dollars) meet the original money (116 dollars)??
Let's write the answer
Suppose the light beam (300000 km/s) moves in the reflected direction (in the space) and also (in the time) – that can enable the light (300000 km/s) to meet the original one (1.16 million km/s) in the past and the coherence will be done there in the past- and we see the coherence results and effects on the solar system -
Means – the light (300000 km/s) moves into the past and found the original light (1.16 million km/s) in the past
Notice No. (1)
The original light beam (1.16 million km/s) can NOT move toward the future to meet the light (300000 km/s) because in the future the original light beam (1.16 million km/s) is NOT found –by that – the coherence can't be occurred in the future - But – the light (300000 km/s) can move into the past because this light beam (300000 km/s) was found in the past because it's a part of the original light beam (1.16 million km/s)
Notice no. (2)
I prove the coherence is done by powerful proves- that tells- this idea is a fact–means- there's a strong proof tells (in fact the light beam 300000 km/s moved into the past) and if we can use this feature practically we can get photos from the past events and by that we can have photos from the catastrophe which killed the dinosaurs and know much better about what had happened really in that time - This can be a real machine of time – the light motion into the past is a strong method to perform this invention. 
Notice no. (3)
Why Can NOT We Move Into The Past As We Move Into The Future?
This question is answered in point no. (**)
(2)
The Light Coherence Proves
First Proof
The planets order is typical to the interference of Young –
In the double slits experiment, Young Interference is consisted of bright fringes and dark fringes - If we consider planet diameter is equivalent to bright fringe – we will see that- the planets order is typically to Young interference because
Jupiter (the greatest fringe) is in the middle and the fringes width is decreased gradually on both sides – typically to the planets order
Notice / I have proved that (Mars original orbit was between Mercury and Venus) if we restore Mars to its original orbit the order will be typical to the Young Interference
(I prove this fact in point no. **)
Second Proof
The planets velocities are defined based on the speed (1.16 million km per second) and the planets velocities analysis shows the speed (300000 km/s) is the planets motions limit- means- the planets velocities are defined based on both velocities (1.16 million km per second) and (300000 km/s) I prove this fact in point No. (**)  
Third Proof
The light coherence defines the solar day period (24 hours) which is the solar system design cornerstone 
(1.16 /0.3) x 2π = 24.3
By this equation the space and time are created- the equation tells–the space is created in curves (2π) and the time is created in units each unit is (24 hours) 
Please note – the solar system geometrical design depends on the light motion in a solar day (24 hours = 86400 seconds) 
The light (1.16 million km per second) moves in a solar day (86400 seconds) a distance  = 100733 million km (= the planets orbital circumferences total)
Fourth Proof
The planets data prove there's a speed (1.16 million km per second) found in the solar system but the sun light beam moves by speed (300000 km/s) that tells the two speeds are facts and found in the solar system and the coherence between them is a logical result
The hypothesis proves discuss many powerful proves for this fact-
Notice- the coherence of light is a very important fact because it tells the light (300000 km/s) moved into the past and by that gives us a proof for the motion on the time axis- for that – many powerful proves support this fact.
I-4 The Matter definition (Based On My Planet Diameter Equation)
(1)
Let's remember my planet diameter equation
Planet Diameter Equation (v1/v2)= (s/r)= I
v = Planet Velocity                                                          
r = Planet Diameter
s= Planet Rotation Periods Number In Its Orbital Period
I= Planet Orbital Inclination        (example, 1.8 degrees be produced as a rate 1.8)
v2, s, r and I are belonged to one planet and v1 is belonged to another planet
The planet (v1) is defined by test the minimum error 
Earth Equation uses Neptune velocity
Mars Equation uses Pluto velocity
Jupiter Equation uses the Earth moon velocity
Saturn Equation uses Mars velocity
Uranus Equation uses Neptune velocity (As Earth)
Neptune Equation uses Saturn velocity
Pluto Equation uses the Earth moon velocity (As Jupiter)
(The Equation works from The Earth To Pluto) (the discussion explains the reason)
Example
Neptune Equation (89143 /49528) = 9.7/ 5.4 =1.8         
89143          = Neptune rotation periods number in Neptune orbital period
49528 km    = Neptune diameter
9.7 km/s      = Saturn velocity
5.4 km/s      = Neptune velocity
59800 days = Neptune orbital period (and Neptune rotation period =16.1 hours)
1.8 degrees = Neptune Orbital Inclination
(the equation is proved and discussed in details in point no. **)
(2)
Can We Define The Matter Nature Based On My Planet Diameter Equation?
The equation tells, the matter is created based on its motion! means Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s!!
That tells the motion with velocity 5.4 km/s is defined before Neptune diameter is created! Can we understand such definition for the matter nature? let's try
(A)
The Matter Nature
The space and matter are created from the same original energy and they move with this original energy motion- BUT the matter has a distinguish picture and different velocity from the space picture and velocity (notice- The Gravitational Waves Prove That The Space Has A Motion)  
If we suppose the space is similar to the sea of water, the matter be similar to a whirlpool or a vortex found on the sea page- means- the matter is a geometrical design has a distinguish picture from the space- as the whirlpool, it's created from the sea water but it has a distinguish picture from the sea waves picture
Means
The whirlpool is carried by the waves motion- and- the matter is carried by its original energy and moves with it- No Mass gravity is required for the matter motion- means- the matter is MOVABLE by nature.
Also
The whirlpool dimensions are defined by the water motion - for example- we have a whirlpool its diameter is (2 meters)- this diameter is defined by the sea water motion features (velocity, pressure and other motion features) by that- the water motion analysis explains how the whirlpool dimensions are created
Also- the whirlpool is created but the creation requirements are needed every day- means- even if this whirlpool is found since years it can be changed immediately if the water motion features are changed- means- the whirlpool creation process is NOT a historical one.
Also- the matter is similar to a creature muscle, the muscle is found based on the blood motion and without this motion the muscle can be changed or removed.
Shortly
The Original Energy Was Found In Motion By Itself (As Moving Light Beam)
From This Moving Energy The Planet Matter Is Created
The Created matter dimensions are defined by the features of this original energy motion (means the planet creation data is defined by the energy motion features)
After the planet creation- The Planet Moves With This Original Energy – means- the created planet moves a motion depending on the motion of this original energy because the planet moves with this original energy motion- and – the planet moves by this original energy motion (No mass gravity is required to cause the matter motion)
The planet creation data is in full harmony with its motion features- this fact is produced logically because the planet data is defined by the original energy motion features.
This explanation tells (Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s)
Example For Explanation
We agreed that the space is similar to the sea of water and the planet (matter) is similar to a whirlpool found on the sea page-  this picture explains the idea clearly- because
We see the whirlpool doesn't move by the sea water waves velocity but by another velocity and that shows a distinguish in form and motion between the whirlpool (the planet) and the sea waves (the space)- BUT- the whirlpool dimensions are defined based on the sea water motion features- and if the motion features are changed the whirlpool dimensions will be changed also- also the whirlpool moves by the sea water motion even with a different velocity relative to the sea waves velocity but the whirlpool motion still is  caused by the sea water motion- based on this picture we can say (because the water motion velocity is 80 km/h that causes this whirlpool diameter to be 2 meters "for example') – this is perfectly our sentence – let's remember it     
(because Neptune velocity is 5.4 km/s that causes Neptune diameter to be 49528 km)
This idea is proved by my planet diameter equation (my fourth equation) (point No.**)  
(B)
Now The velocity is a motion in (A Defined Direction)
Means– the matter is created because it depends on a motion in a defined direction- as we have seen- Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s but this velocity is a motion in defined direction- and that tells Neptune creation depends on a motion in the direction of the (x axis positive "+x ") (for example)
That tells, if this motion moves in (x axis negative "-x ") that will cause Neptune diameter to be changed or perished
Means- the matter creation needs a motion in A Defined Direction
Now let's ask our question
Why Can't The matter (creature) Moves Toward Its Past?
Because the matter depends on a motion in one defined direction- that causes the matter moves into (the future) always and can't move into (the past) let's discuss this question more deeply in point no (I-6)
Notice
No Planet Moves By The Sun Gravity (Newton is wrong) – logically because- the planet moves by its creation force- means- the planet creation and motion should be done by one force only (one energy only) because if two forces have effects on the same one planet- this planet will be broken- this fact is proved strongly with the gravitational waves source discussion (Point no.**)  
I-5 The Planets Creation
I summarize the main idea in following and the idea proves and discussions are found in point no. (**)
(i)
We know, the solar system is created from energy of one light beam its speed is 1.16 million km per second- and – the light created the space (the planets orbits) firstly and the energy is consumed in the space creation- and for that- the rest energy is found in one light beam its speed is 300000 km/s - And
From this light beam 300000 km/s the solar planets are created
Shortly
before the solar planets creation
The solar system was one light beam (or one wave moves by speed of light (300000 km/s)- by that – the solar system is One Wave moves by speed of light (300000 km/s)
Now
The Solar System needs To Create A Stationary Point Its velocity Zero relative to the moving one wave (300000 km/s)
This is the basic information in the solar system design-
The solar system needs to create a stationary point relative to the wave motion- by that – two velocities will be found which are (v1= the wave its speed 300000 km/s) and (v2= Zero= the stationary point velocity relative to the wave motion)–these two velocities produce a relative motion with different velocity 300000 km/s– this relative motion is the solar system design cornerstone.
Shortly – the solar system needs to create A Stationary Point 
Notice– The solar system is carried by the light beam motion, NO stationary point can be found here – it's similar to a ship on the sea water- Nothing can stop- because the motion is done forcedly by the sea water –
The stationary point will be similar to the whirlpool (vortex) on the sea page-  BUT
The solar system needs to create this stationary point - Now – let's try to create this stationary point in following - The solar system uses two procedures to do that,  
(ii)
The first procedure
The wave its velocity 300000 km/s revolves around a point in space (any point in space), the revolution motion creates 2 equal velocities on both sides of the revolution- the two velocities are equal in value and opposite in direction- their total be equal Zero-means- the revolution motion creates A Stationary Point in the center of the revolution. 
The second procedure
The previous idea is correct- but –the velocity 300000 km/s is a huge one and to decrease it to Zero velocity this is a complex process– for that- the wave (300000 km/s) created small waves with low velocities to use them as steps to decrease the velocity to Zero- the small waves are The Planets- (The planet is a small wave moves by low velocity relative to the original wave its velocity 300000 km/s) 
Why Are These Small Waves Required?
Because the velocity 300000 km/s is decreased to Zero by using these small waves and their low velocities- the low velocities are used as steps to decrease the unified wave velocity (300000 km/s) to be (Zero)- this process decreases the velocity gradually from 300000 km/s to Zero depending on these small waves velocities (the planets velocities)  
Means- the planets are created for this process to decrease the wave velocity from 300000 km/s to Zero- and The Planet Is A Small Wave Moves By Low Velocity 
Shortly – the solar system has one complete system of velocities, Starting from Zero to 300000 km/s where the planets velocities are the steps between the two velocities – let's prove that here
(iii)
300000 km = 7.1 x (205.8)^2 where
7.1 is Lorentz length contraction effect for speed 297000 km/s (99% of speed of light)
205.8 km/s = the 9 planets velocities total (176 km/s) + the Earth moon velocity
(The moon velocity =29.8 km/s = the Earth velocity because they revolve together)
Why does the data use the squared value (205.8)^2?
We know the answer- but - Let's remember it
The planets are geometrical points on the same light beam and move with its motion- for that- the planets velocities rates creates rates of time– for example-  Mercury velocity = 1.6 the Earth velocity- that means – one hour of Mercury clock = 1.6 hours of the Earth clock- Why??
Because Mercury and the Earth are carried by the same one light beam- the light moves one motion and passes one distance in one period of time- by that Mercury and the Earth have to move this same motion and to pass this same distance in this same period of time- but the two planets velocities are different- for that- the planets use different rates of time based on their velocities rates and by that the planets move equal distances in the same period of time –
Now- the velocity (205.8 km/s) moves relative to the stationary point (Zero) and creates a rate of time (1 second = 205.8 seconds) –
(one second of the unified wave clock = 205.8 seconds of the stationary point clock)
But – the energy is reflected in the solar system (I prove that in point no.**),
The energy reflection reflects the players – means
(one second of the stationary point clock = 205.8 seconds of the unified wave clock)
The stationary point will be THE SUN – by that
(one second of the sun clock = 205.8 seconds of the unified wave clock) – means
(one second of the sun clock = 205.8 seconds of any planet clock) –
Now during one second of the sun clock, the wave clock needs 205.8 seconds while the wave moves by a velocity 205.8 km/s- means –
During one second of the sun clock, the wave moves 42253 km = 300000 km /7.1
That creates the different velocity 300000 km/s between the sun motion and the wave motion-
Notice 1
The wave (205.8 km/s) moves during 1461 seconds a distance = 300000 km, and we know the Earth cycle (1461 days = 365 +365 +365 +366)
That tells, the speed of light (300000 km/s) is performed by the rate of time and that causes to create the Earth cycle-    
Notice 2
Planet velocity is created by the rate of time- means- if no rate of time can be used – No planet velocity can be created – instead- all motions will be only by speed of light (300000 km/s)- the planet can create a small velocity because it can use rate of time
We realize that clearly because
The planets motions depend on the light motion- by that – the motion is done by One Motor only which moves by speed of light (300000 km/s), the planets can only move by speed of light or create a rate of time for their smaller velocities - No more options are provided.  
Notice 3
We understand that, the planets are geometrical points on the same light beam, means
The planets are similar to carriages in one train and the light motion is the train engine  means the planets are carried on the light beam and move with this light motion
I-6 Can The Time Machine Be A Fact?
To answer this question we need to review basics facts we have studied – let's do that in following
(1)
The solar system is created from one energy and this energy is provided by one light beam
(2)
The light moves simply and freely in any direction (for space) and (for time)- means- the light can move into the future (as matter does) or into the past (which the matter can Not do)
(3)
We know, the solar system is created from one light beam, and this light moves by a speed (1.16 million km per second) - And
We know, the light (1.16 million km per second) created the planets orbits firstly before any planet creation and the energy is consumed in the space creation and because of the energy consumption the light speed is decreased from  (1.16 million km per second) to the known speed of light 300000 km/s – also
We know, the light (1.16 million km per second) started its motion from Mercury orbit moves toward Pluto- that means- the light (1.16 million km per second) started from Mercury orbit with speed (1.16 million km per second) and the light created all planets orbits till Pluto orbit- before any planet creation- and by that- the light lost its energy and the light beam in Pluto orbit reduced its speed to be 300000 km/s as a result for the energy consumption in the space creation process
(4)
Also we know the energy is reflected from Pluto toward Venus (the inner planets)
By that the light beam (300000 km/s) moves in the reflected direction to the original light beam (its speed 1.16 million km per second) 
And – we know-
The light beam (300000 km/s) reaches to the original point (Mercury Orbit) from which the light (1.16 million km per second)  started its motion 
And we know that
A coherence of light is done between the original light beam (1.16 million km per second) and the light beam (300000 km/s)
BUT  we don't know how such coherence can be occurred? Let's analyze that deeply in following
(5)
The produced light beam (300000 km/s) moves in (the reflected direction) to the direction of the original light beam (1.16 million km per second) (In Space)  and reaches to Mercury orbit (the origin point)
But– logically – the produced light beam (300000 km/s) can NOT find the original light beam (1.16 million km per second) there because the original light beam is consumed already in the space creation process and the rest energy is this produced light beam (300000 km/s) – based on that –
How Can This Coherence Be Occurred? Means-
How can the produced light beam (300000 km/s) meet the original light beam (1.16 million km per second)?  The answer is
The produced light beam (300000 km/s) moves (in the reflected direction) to the motion direction of the original light beam (1.16 million km per second) (In Space) and (In Time) Means- the produced light beam moves into (Its Own Past) and in the past this produced light beam (300000 km/s) was (A Part of the original light beam 1.16 million km per second) and because of that the produced light beam (300000 km/s) can meet the original light beam (1.16 million km per second),
And
The two light beams create a coherence (in the past) and we see the results of this coherence in our present time-
The idea is very important because – the coherence of the two light beams (1.16 mkm/s and 0.3 mkm/s) is proved strongly and with powerful proves and any explanation for this coherence will prove that the produced light beam (300000 km/s) must move Into The Past to enable this coherence occurrence- and that tells clearly- the travel through the time is possible and fact
BUT
Can the matter moves into its past as the light does? NO
Why?? Because
We know the light can move simply in any direction (+ x, + y, + z, + t) by that the light can move into the future and can move into the past BUT
The matter creation depends on A Motion In A Defined Direction-
let's remember this idea
Neptune diameter =49528 km because Neptune velocity is 5.4 km/s
(This Fact Is Proved By My Planet Diameter Equation)
Now, Neptune velocity is a motion in a defined direction
(for example a motion in +x direction)
The energy moves in this direction (+x direction) and because of this motion Neptune matter is created and Neptune diameter is defined- now if the energy moves in (opposite direction "–x direction") that will change Neptune diameter or cause to perish its matter at all
Means- as long as – Neptune is found- that means – the energy moves in one direction (and not two directions) – for that Neptune can move into the future but can NOT move into the past.    
Notice
The matter can not move into the past but the light can do that-
Means- we have the time machine already- we need to know how to send the light into the past and by that we can have photos from the past events- and this will be The Time Machine
The Hypothesis Proves
I-7 The Proves Logic Analysis
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
I-9 Planets Orbits Are Defined By A Motion Its Speed = (1.16 million km /s)
I-10 Jupiter distances are defined by a motion by a speed = (1.16 million km /s)
I-11 The Solar System Geometrical Design Proves The Hypothesis
I-12 The Solar System Distances Analysis Prove The Hypothesis
I-13 Deep Analysis For The Planets Orbits
1-14 Light defines each planet orbital period
I-15 Can Planet Diameter Be Used As A Period Of Time?
I-16 Mercury Orbit Analysis
I-17 The Planets Data Is Created By The Light Motion Directly
I-18 Light Defines Each Planet Rotation Period
I-7 The Proves Logic Analysis
Why can we prove that, a light beam its speed 1.16 million km per second is found in the solar system? also, the theory tells this light beam energy is consumed and the rest energy is found in one light beam its speed 300000 km/s (the known speed of light), if this light energy is consumed, how can we prove its existence?
There are two major reasons, which are
The Planets Orbits Are Created Before Any Planet Creation- And These Orbits Are Created Based On One Motion- And This One Motion Is Done By A Speed 1.16 Million Km Per Second.
The Planets Matters Are Created Based On Their Orbits – means- the planet is similar to a tree and the orbit is similar to a ground and the tree is planted in the ground-
NOTICE
after the planet creation, the planet can migrate from its original orbit to any other orbit - as Mars and Pluto did and that will not cause to destroy the planet. 
Shortly-
the planet matter and data is created based on this planet orbit- the orbit is defined before any planet creation and based on the orbit the planet matter and data is created (we remember- the space is similar to the sea of water and the planet matter is similar to a whirlpool found on this sea page- that tells the whirlpool is created based on its place in the sea of water)
Shortly- The Planet Matter Is Created Depends On This Planet Orbit
The speed 1.16 million km per second is registered in the planets orbits because the orbits are created from the energy of the light beam (1.16 million km per second), and the planet matter is created from this planet orbit (energy)
Shortly
The light beam (1.16 million km per second) is the source of energy for (everything) in the solar system-
All orbits are defined by its energy, all matters are created by its energy, and all motions are done by its motion-
Can we prove this light beam is a fact? YES we can
The analysis for any data or any motion will discover this light beam because it's the source of energy for everything
Shortly
the light beam (1.16 million km per second) is The Source Energy of the solar system
The mother of all children can be discovered by analysis these children data  
A QUESTION
Can the solar system design uses a rate 1.16 and I can't understand that but wrongly consider this rate (1.16) as a speed of light 1.16 million km per second?
NO- this can't be possible – Because
The light beam (1.16 million km per second) behaves typically to the known light beam (300000 km/s) – as we will see in the data discussion
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
DATA
My 5th equation (v1v2=322)- the planets velocities prove it–let's see that in following  
322 = 47.4 km/s (Mercury velocities)  x 6.8 km/s  (Uranus velocities)                    
322 = 35 km/s  (Venus velocity) x 4.7 km/s (Pluto velocity) x 2             
322 = 29.8 km/s (the Earth velocity) x 5.4 km/s (Neptune velocities) x 2      
322 = 24.1 km/s (Mars velocity) x 13.1 km/s (Jupiter velocity)               
322 = (17.9 km/s)^2 (Ceres velocity) (Max error 2%)
DATA ANALYSIS
The previous data tells the planets velocities are defined by three features
(1st Feature)
The planets velocities are complementary one another –means - each planet velocity is complementary with another planet velocity– means– The planets velocities are defined in pairs and not in single planets. 
(Notice, the inner planets orbital inclinations are defined by the rule (v1/v2), for example, Mercury orbital inclination 7 deg = Mercury velocity 47.4/ Uranus velocity 6.8 that proves the effect of the rule (v1v2=322) on the planet motion)
Ceres velocity tells the idea - Ceres is used as the main point - as a result the outer planets be complementary with the inner planets – for that the rule (v1v2=322) controls the planets velocities- that means- The planets velocities are created based on One Design- Ceres velocity is used as the main point for this design
(2nd Feature)
Why the constant is 322? because 1160000 seconds = 322 hours – means- there's speed of light = 1.16 million km /s - Shortly
Mercury (47.4 km/s) moves during 6.8 hours a distance             = 1160000 km 
Uranus (6.8 km/s) moves during 47.4 hours a distance               = 1160000 km  And
Venus (35 km/s) moves during 2 x 4.7 hours a distance             = 1160000 km 
Pluto (4.7 km/s) moves during 2 x 35 hours a distance               = 1160000 km 
Earth (29.8 km/s) moves during 2 x 5.4 hours a distance             = 1160000 km 
Neptune (5.4 km/s) moves during 2 x 29.8 hours a distance        = 1160000 km  And
Mars (24.1 km/s) moves during 13.1 hours a distance                = 1160000 km 
Jupiter (13.1 km/s) moves during 24.1 hours a distance             = 1160000 km  And
(Notice - Saturn (9.7 km/s) moves during 33.2 hours a distance = 1160000 km  - (between 33.2 and Venus velocity 35 km/s the error 5%)) (Data Max error 2%)
The Data Proves, The Planets Velocities Are Functions In The Speed 1.16 Million Km Per Second. That proves the speed (1.16 million km per second) is A Fact
(notice the planets velocities are complementary one another also based on the known speed of light 300000 km/s, the paper provides this data) 
(3rd Feature)
The planets velocities limit depend on the known speed of light 300000 km/s
Let's explain that in following
The 9 planets velocities total is 176 km/s (I add the Earth moon velocity 29.8 km/s)
The 10 planets velocities total is 205.8 km/s
300000 km = 7.1 x (205.8)^2
The speed 297000 km/s (99% speed of light) causes Lorentz length contraction effect with the rate 7.1
The velocity (205.8 km/s) moves during 205.8 seconds a distance 42253 km
Where 300000 = 7.1 x 42253 km BUT 42253 = (205.8)^2
The squared value (205.8)^2 is found because of the used rate of time
We have studied this equation in point (I-5**) -the data shows, the planets velocities are defined as parts of a complete system of velocities starts from (Zero = stationary point) and reaches to the speed of light 300000 km/s and between these two values the planets velocities are defined to support this same system- that tells- the planets velocities are defined with limit to the speed of light (300000 km/s) - The data proves the speed (1.16 million km per second) is a fact -and also the data proves the coherence is done between the light (1.16 million km per second) and the light (300000 km/s)
(CONT)
Gerges Francis Tawdrous +201022532292
Physics Department-  Physics & Mathematics  Faculty 
Peoples' Friendship university of Russia – Moscow   (2010-2013)
Curriculum Vitae                  https://www.academia.edu/s/b88b0ecb7c
E-mail                            [email protected], [email protected]
                                      [email protected]                   
ORCID                          https://orcid.org/0000-0002-1041-7147
Facebook                        https://www.facebook.com/gergis.tawadrous
VK                                 https://vk.com/id696655587
Tumblr                           https://www.tumblr.com/blog/itsgerges 
Researcherid                   https://publons.com/researcher/3510834/gerges-tawadrous/
Google                                https://scholar.google.com/citations?user=2Y4ZdTUAAAAJ&hl=en
Livejournal                     https://gerges2022.livejournal.com/profile
Pocket                                                                     https://getpocket.com/@646g8dZ0p3aX5Ad1bsTr4d9THjA5p6a5b2fX99zd54g221E4bs76eBdtf6aJw5d0?src=navbar
PUBLICATIONS
box                                 https://app.box.com/s/47fwd0gshir636xt0i3wpso8lvvl8vnv
Academia                       https://rudn.academia.edu/GergesTawadrous
List of publications         http://vixra.org/author/gerges_francis_tawdrous
Slideshare                            https://www.slideshare.net/Gergesfrancis
1 note · View note
electronalytics · 1 year ago
Text
Bio-Energy Market Report, Research Outlook, Products, and Application 2017 – 2032
Tumblr media
Overview of the Bio-Energy Market:
The production, delivery, and use of energy obtained from biomass resources are all part of the bioenergy market. The term "biomass" refers to organic materials that can be used to create energy through a variety of processes, such as combustion, gasification, and biochemical conversion, such as plants, agricultural residues, forestry residues, and organic waste. Biomass may be refilled through sustainable practises, which is why bioenergy is regarded as a renewable energy source.
The global bioenergy market size was valued at $102.5 billion in 2020, and is expected to reach $217.8 billion by 2030, registering a CAGR of 7.6% from 2021 to 2030.
Key Factors Driving the Bio-Energy Market:
Transition to Renewable Energy: The bioenergy sector is significantly influenced by the global move to renewable energy sources. As a renewable and environmentally friendly substitute for fossil fuels, bioenergy helps to slow global warming by lowering greenhouse gas emissions.
Energy Independence and Security: By utilising a variety of energy sources, bioenergy can help with energy security. Countries with plentiful biomass resources can increase their energy independence and decrease their reliance on imported fossil fuels.
Government Policies and Incentives: Countless countries around the world have put policies and incentives in place to encourage the use of bioenergy. These policies stimulate the creation and application of bioenergy technology and include feed-in tariffs, renewable energy objectives, tax incentives, and subsidies.
Concerns for the environment and carbon neutrality: Bioenergy is regarded as a carbon-neutral energy source because the carbon dioxide.
Waste Management and Circular Economy: Bio-energy can play a role in waste management by utilizing organic waste materials for energy production. This contributes to the circular economy concept, where waste is seen as a resource, promoting sustainable resource utilization and waste reduction.
Technological Advancements and Efficiency Improvements: Advances in bio-energy technologies, such as improved biomass conversion processes, biofuel production techniques, and efficient combustion systems, enhance the efficiency and economic viability of bio-energy. Technological advancements make bio-energy more competitive and attractive in the energy market.
Regional Variations in Biomass Resource Accessibility: There are regional differences in the accessibility and availability of biomass resources. Countries with an abundance of biomass resources, such as forestry waste and agricultural wastes, provide favourable conditions for the development of bioenergy.
Rural Development and Job Creation: By generating jobs in the biomass production, processing, and bioenergy plant operations, bioenergy initiatives frequently have a favourable effect on rural regions. Rural development and economic expansion are aided by this.
We recommend referring our Stringent datalytics firm, industry publications, and websites that specialize in providing market reports. These sources often offer comprehensive analysis, market trends, growth forecasts, competitive landscape, and other valuable insights into this market.
By visiting our website or contacting us directly, you can explore the availability of specific reports related to this market. These reports often require a purchase or subscription, but we provide comprehensive and in-depth information that can be valuable for businesses, investors, and individuals interested in this market.
“Remember to look for recent reports to ensure you have the most current and relevant information.”
Click Here, To Get Free Sample Report: https://stringentdatalytics.com/sample-request/bio-energy-market/11393/
Market Segmentations:
Global Bio-Energy Market: By Company
• Abengoa Bioenergy
• Amyris
• BP
• Butamax Advanced Biofuels
• Ceres
• Enerkem
• Joule Unlimited
• LanzaTech
• Novozymes
• Sapphire Energy
Global Bio-Energy Market: By Type
• Bioethanol
• Biodiesel
• Biogas
• Others
Global Bio-Energy Market: By Application
• Transportation
• Off-grid Electricity
• Cooking
• Others
Global Bio-Energy Market: Regional Analysis
The regional analysis of the global Bio-Energy market provides insights into the market's performance across different regions of the world. The analysis is based on recent and future trends and includes market forecast for the prediction period. The countries covered in the regional analysis of the Bio-Energy market report are as follows:
North America: The North America region includes the U.S., Canada, and Mexico. The U.S. is the largest market for Bio-Energy in this region, followed by Canada and Mexico. The market growth in this region is primarily driven by the presence of key market players and the increasing demand for the product.
Europe: The Europe region includes Germany, France, U.K., Russia, Italy, Spain, Turkey, Netherlands, Switzerland, Belgium, and Rest of Europe. Germany is the largest market for Bio-Energy in this region, followed by the U.K. and France. The market growth in this region is driven by the increasing demand for the product in the automotive and aerospace sectors.
Asia-Pacific: The Asia-Pacific region includes Singapore, Malaysia, Australia, Thailand, Indonesia, Philippines, China, Japan, India, South Korea, and Rest of Asia-Pacific. China is the largest market for Bio-Energy in this region, followed by Japan and India. The market growth in this region is driven by the increasing adoption of the product in various end-use industries, such as automotive, aerospace, and construction.
Middle East and Africa: The Middle East and Africa region includes Saudi Arabia, U.A.E, South Africa, Egypt, Israel, and Rest of Middle East and Africa. The market growth in this region is driven by the increasing demand for the product in the aerospace and defense sectors.
South America: The South America region includes Argentina, Brazil, and Rest of South America. Brazil is the largest market for Bio-Energy in this region, followed by Argentina. The market growth in this region is primarily driven by the increasing demand for the product in the automotive sector.
Click Here, To Buy Premium Report:  https://stringentdatalytics.com/purchase/bio-energy-market/11393/?license=single
Reasons to Purchase Bio-Energy Market Report:
• To gain insights into market trends and dynamics: this reports provide valuable insights into industry trends and dynamics, including market size, growth rates, and key drivers and challenges.
• To identify key players and competitors: this research reports can help businesses identify key players and competitors in their industry, including their market share, strategies, and strengths and weaknesses.
• To understand consumer behaviour: this research reports can provide valuable insights into consumer behaviour, including their preferences, purchasing habits, and demographics.
• To evaluate market opportunities: this research reports can help businesses evaluate market opportunities, including potential new products or services, new markets, and emerging trends.
• To make informed business decisions: this research reports provide businesses with data-driven insights that can help them make informed business decisions, including strategic planning, product development, and marketing and advertising strategies.
About US:
Stringent Datalytics offers both custom and syndicated market research reports. Custom market research reports are tailored to a specific client's needs and requirements. These reports provide unique insights into a particular industry or market segment and can help businesses make informed decisions about their strategies and operations.
Syndicated market research reports, on the other hand, are pre-existing reports that are available for purchase by multiple clients. These reports are often produced on a regular basis, such as annually or quarterly, and cover a broad range of industries and market segments. Syndicated reports provide clients with insights into industry trends, market sizes, and competitive landscapes. By offering both custom and syndicated reports, Stringent Datalytics can provide clients with a range of market research solutions that can be customized to their specific needs
Contact US:
Stringent Datalytics
Contact No -  +1 346 666 6655
Email Id -  [email protected]  
Web - https://stringentdatalytics.com/
0 notes
mindblowingscience · 9 months ago
Text
Researchers report that replacing 50% of animal products with alternative proteins by 2050 could free up enough agricultural land to generate renewable energy equivalent in volume to today's coal-generated power while simultaneously removing substantial CO2 from the atmosphere. The study, published in the journal One Earth, is based on a CO2-removal method known as "bioenergy with carbon capture and storage" (BECCS), which involves cultivating quickly growing crops whose biomass can then be stored permanently in geological formations or used as a feedstock to produce renewable energy.
Continue Reading.
105 notes · View notes
Text
Tumblr media
Researchers discover new route to recyclable polymers from plants
Researchers at Hokkaido University have taken a significant step forward in the drive to make recyclable yet stable plastics from plant materials. This is a key requirement to reduce the burden of plastic pollution in the environment. They developed a convenient and versatile method to make a variety of polymers from chemicals derived from plant cellulose; crucially, these polymers can be fully recycled. The method was published in the journal ACS Macro Letters. Cellulose is one of the most abundant components of biomass derived from plants, being a key part of the tough cell walls surrounding all plant cells. It can be readily obtained from plant wastes, such as straw and sawdust, therefore, using it as a feedstock for polymer manufacture should not reduce the availability of agricultural land for food production.
Read more.
20 notes · View notes
rjzimmerman · 6 months ago
Text
Excerpt from this story from the Chicago Tribune:
Reid Thompson, a fourth-generation farmer in central Illinois, is in the middle of planting season. Weather permitting, he tends to the fields in the morning, walks home for lunch with his wife and newborn, and then returns to his tractor until sundown. He’ll harvest his corn in early fall, sell it to a nearby ethanol plant, and eventually it will make its way to a car’s gas tank. That’s the routine, at least for now.
Nearly all U.S. gasoline contains ethanol to reduce emissions, and nearly all of that ethanol is made from corn starch. But, electric and hybrid vehicles offer even further emissions reductions. This poses a threat to corn demand that could be devastating for a state such as Illinois, the second-largest corn producer in the country.
The resulting decline in the value of Midwestern farmland and corn prices will hurt farmers and have ripple effects across rural communities, predict University of Nebraska at Lincoln agricultural economists Jeffrey Stokes and Jim Jansen. Rural businesses that cater to the agriculture sector could go under, property taxes that fund local schools will likely plummet and farmers could be forced to default on debts to community lenders, the economists forecast. This would come after farmers have been hit by a series of misfortunes over the last five years: the pandemic, trade wars, inflation and excess supply.
Corn could be the key to solving another clean energy dilemma, though. Unlike cars and trucks, planes are difficult to electrify, and some fuel companies believe the answer to cleaning up aviation lies in America’s heartland.
“(Corn is) the cheapest, most sustainable, most scalable feedstock (raw material),” said Patrick Gruber, CEO of Gevo, one of the companies with plans to turn corn ethanol into aviation fuel.
Thompson and other corn farmers are eager to seize this opportunity in sustainable aviation fuel, another term for jet fuel made without fossil fuels.
But, before corn ethanol-to-jet fuel can be a viable alternative to conventional jet fuel, the emissions associated with corn ethanol production must come down. This will require farmers to change their practices on the field and ethanol plants to implement controversial technologies like carbon sequestration.
Since 2005, the federal government has required transportation fuels to be blended with increasing amounts of renewable fuels such as corn ethanol to reduce air pollution, greenhouse gas emissions and dependence on foreign oil. The mandate transformed rural economies across the Midwest. Between 2008 and 2016, corn prices rose by 30%, and 26% more land was converted to cropland than would have been otherwise, according to a 2022 study published by the National Academy of Sciences.
Ethanol plants quickly sprang up around corn fields, due largely to investments from farmers eager for the new market to succeed.
The Biden administration established a “Grand Challenge” to produce 3 billion gallons of sustainable aviation fuel — defined as jet fuel with 50% less emissions than conventional jet fuel — annually by 2030. The ultimate goal is to make enough of this fuel to meet all national demand — estimated to be 35 billion gallons — by 2050.
Airlines are on board. United and Delta have both signed advance purchase agreements with numerous aspiring sustainable aviation fuel producers. Currently, however, sustainable fuel only accounts for 0.1% of the jet fuel used by major U.S. airlines, according to the latest federal government data.
The challenge is that creating sustainable aviation fuel costs three to five times more than conventional jet fuel and securing biomasses at scale is challenging. Most of the 24.5 million gallons produced last year were created with discarded cooking oil and animal fat, which are available in limited quantities.
3 notes · View notes
probablyasocialecologist · 2 years ago
Text
Edible insects are an environmentally attractive alternative to conventional livestock because they require less feed and water; they produce lower levels of greenhouse gases and can be raised in small spaces. Worldwide, livestock contributes to 18% of greenhouse gas emissions, which, in light of global warming and climate change, favours the less resource-intensive insect production which emits fewer greenhouse gases by a factor of 100.
Insects can be a renewable food source in the future as many edible species can consume agricultural and food waste or culinary by-products, but there remain important research gaps in understanding the effects of variable feedstocks as most case studies use high-grade feed. Such organic side streams could be used to reduce the environmental impact of insect farming while simultaneously creating a novel, circular waste-processing income. Throughout the world, 1/3 of all food is wasted, and household food waste is 70% of the post-farm total. If food waste was its own country, it would be the third largest emitter of greenhouse gases after the USA and China. Food waste is expected to increase in the future with a continually growing and increasingly urbanised global population adopting ‘modern’ lifestyles.
It is challenging and wasteful to commercialise traditional composting of multiple waste streams on a large scale, but waste can be fed directly to insects to convert low-value biomass into higher-value insect mass. By valorising waste as feed, it may mitigate the impact of the food industry. Some fly (Diptera) species are known to be able to convert agricultural manure into body mass and reduce the waste dry matter by 58%. For food waste the conversion is as high as 95% leaving the remainder as a high-grade soil improver .
40 notes · View notes
tritonmarketresearch · 2 years ago
Text
Biomass Power Market to Grow at CAGR of 6.08% from 2022 to 2028
Triton Market Research presents the Global Biomass Power Market report segmented by Application (Industrial, Commercial, Residential), by Feedstock (Municipal Solid Waste, Biogas, Liquid Biomass, Solid Biomass), by Technology (LFG, Co-firing & CHP, Gasification, Combustion, Anaerobic Digestion), by Geographical Region (North America, Europe, Asia-Pacific, Latin America, Middle East and Africa), discussing Market Summary, Competitive Landscape, Market Drivers, Market Challenges, Market Opportunities, Industry Outlook, Research Methodology & Scope, and Global Market Size, Forecasts, & Analysis (2022-2028).
According to estimates from Triton Market Research, the Global Biomass Power Market is likely to grow with CAGRs of 6.08% (by revenue) and 6.51% (by volume) in the forecast period from 2022 to 2028.
Tumblr media
Request Free Sample Report:
https://www.tritonmarketresearch.com/reports/biomass-power-market#request-free-sample
Growing environmental concerns regarding carbon emissions due to the increasing use of conventional fuels for power generation and transportation have resulted in nations across the world switching to cleaner and more effective energy sources. This, in turn, has shifted the focus on biomass for power generation, which is expected to benefit the global market growth.
Renewable power sources, such as wind and solar, act as substitute technologies for biomass power. Due to increased R&D, as well as the availability of financial incentives globally, these alternatives have emerged as superior options. This, however, has had a negative impact on the adoption of biomass for power generation, thus hampering the studied market’s growth.
The Asia-Pacific leads the global biomass power market, accounting for the highest revenue share in 2021. The availability of financial incentive schemes for the adoption of renewable power sources in a majority of the countries in this region is a key factor driving market growth. Also, the implementation of programs for cofiring biomass with coal-based power plants is anticipated to augment the studied market’s growth in this region.
Thermax Ltd, Suez SA, Orsted, Ramboll Group, Veolia Environnement SA, Xcel Energy Inc, Babcock & Wilcox Enterprises, Ameresco Inc, E.ON Energy, Mitsubishi Heavy Industries Ltd, Valmet Oyj, General Electric Company, and Vattenfall AB are some of the noteworthy players in the biomass power market.
The biomass power market is characterized by high capital investment. It requires the presence of high-end laboratories, technological expertise, and high capital cost for R&D, which act as a hindrance to new players aspiring to set foot into the market.
Besides, major global players, such as General Electric Company and Mitsubishi Heavy Industries Ltd, have a strong market presence and technical expertise in biomass power technologies and components, which helps them capture greater shares in the market. This enhances the industry rivalry among the companies operating in the biomass power market.
 Contact Us:
Phone: +44 7441 911839
2 notes · View notes
123567-9qaaq9 · 3 days ago
Text
Informative Report on Bio LNG  Market | BIS Research
Bio LNG (Bio Liquefied Natural Gas) refers to a renewable form of liquefied natural gas produced from organic biomass sources, such as agricultural waste, food waste, sewage sludge, or other organic materials through anaerobic digestion or gasification processes. 
Bio LNG is considered a sustainable fuel alternative to traditional fossil-based LNG, as it can significantly reduce greenhouse gas emissions, especially when considering its life-cycle carbon footprint. 
The global bio-LNG market was valued at $618.4 million in 2022 and is anticipated to reach $3,607.2 million by 2032, witnessing a CAGR of 20.3% during the forecast period 2023-2032.
Bio LNG  Overview 
Bio LNG, or Bio Liquefied Natural Gas, is a renewable, low-carbon fuel derived from organic biomass sources, such as agricultural residues, food waste, and sewage sludge. The production process begins with the breakdown of organic matter through anaerobic digestion or gasification, which generates biogas. 
Benefits for BIO LNG Market 
One of the critical benefits of Bio LNG is its circular economy aspect, as it is derived from waste materials that would otherwise contribute to emissions. Furthermore, when produced from waste, it can be considered a nearly carbon-neutral or even carbon-negative fuel, depending on the feedstock and production method. This makes it highly attractive for industries aiming to meet stringent emissions regulations and achieve sustainability goals.
Download the report to understand better 
Market Segmentation
By Application 
By Source 
By Region 
Grab a look at our free sample page to know more click here ! 
 
Key Market Players 
TotalEnergies SE
Linde plc
MAKEEN Energy
Nordsol
BoxLNG Pvt. Ltd
For more reports visit our Advanced Materials Chemicals and Fuels Vertical Page ! 
Bio LNG  Market Drivers 
The following are the demand drivers for the global bio-LNG market:
•    Rising Environmental Concerns •    Increasing Number of LNG Trucks
The market is expected to face some limitations as well due to the following challenges:
•    Limited Availability of Feedstocks •    High Price of Bio-LNG as Compared to LNG
Recent Developments in the Bio LNG  Market
•  In February 2024, D-Wave Systems announced that its 1200+ qubit Advantage2 prototype would be available via its Leap real-time quantum cloud service. This allowed existing Leap subscribers to gain immediate access to the new hardware, and new users can sign up for Leap and receive up to one minute of complimentary use of the Advantage2 prototype alongside other quantum processor units and solvers offered by the platform. •  In December 2023, IBM announced the collaboration with Keio University, University of Tokyo, Yonsei University, Seoul National University, and University of Chicago to work together to support quantum education activities in Japan, Korea, and the U.S. •    In June 2023, Intel Corporation unveiled its latest quantum research chip, Tunnel Falls, a 12-qubit silicon chip, extending its availability to the quantum research community. This introduction of Tunnel Falls underscores the ongoing technological advancements in quantum computing, and the company’s focus on silicon-based qubits highlights the potential for scalability and integration with existing semiconductor manufacturing processes, which could drive broader adoption of quantum computing technologies across industries.
Conclusion 
The Bio LNG market is poised for significant growth as industries across the globe shift toward sustainable energy solutions to combat climate change and reduce carbon emissions. With its ability to leverage existing LNG infrastructure, Bio LNG presents a practical and scalable solution for sectors like heavy-duty transport, shipping, and industrial applications. 
Bio LNG’s potential for carbon neutrality, especially when produced from waste feedstocks, adds a compelling environmental benefit, making it a key player in the transition toward a circular economy.
0 notes
poojagblog-blog · 5 months ago
Text
Biomass gasification is a sustainable alternative to fossil fuels, reducing greenhouse gas emissions and promoting energy independence. Government support for renewable energy, the need for energy security and rural development, and the growing need for clean energy solutions are driving the biomass gasification industry. The global biomass gasification is predicted to expand rapidly over the next few years, owing to technological developments, increased investment in bioenergy projects, and rising demand for sustainable energy solutions.
0 notes
electronalytics · 1 year ago
Text
Biomass Refining Market Overview, Demand, Key Players and Regional Outlook Study 2017 – 2032
Tumblr media
Overview:
The Biomass Refining Market refers to the market for converting biomass feedstock into value-added products through various refining processes. Biomass refers to organic materials derived from plants and agricultural residues, which can be used as a renewable and sustainable source of energy and chemical feedstock. Biomass refining involves the conversion of biomass into biofuels, biochemicals, bioplastics, and other valuable products. The Global Biorefinery Market is estimated to reach over USD 336.39 billion by 2031, exhibiting a CAGR of 9.06% during the forecast period. Here is an overview, key trends, key points, and demand factors related to the Biomass Refining Market:
Key Trends:
•             Shift towards Renewable Energy: The increasing focus on reducing greenhouse gas emissions and dependence on fossil fuels has propelled the demand for renewable energy sources. Biomass refining plays a vital role in the production of biofuels, such as bioethanol and biodiesel, which can replace fossil fuels in transportation and power generation.
•             Circular Economy and Waste Valorization: Biomass refining enables the valorization of organic waste streams and by-products from agricultural, forestry, and food processing industries. It contributes to the circular economy by converting waste materials into valuable products, reducing waste generation and promoting sustainable resource utilization.
•             Advanced Conversion Technologies: Advancements in biomass refining technologies, such as pyrolysis, gasification, and enzymatic hydrolysis, have improved the efficiency and scalability of biomass conversion processes. These technologies offer opportunities for the production of advanced biofuels and high-value biochemicals from diverse biomass feedstocks.
•             Biorefineries and Integrated Value Chains: Biomass refining often takes place in biorefineries, which are facilities that integrate multiple conversion processes to maximize the production of various products from biomass. Integrated value chains, where different industries collaborate to optimize biomass utilization, are emerging to leverage the potential of biomass refining across multiple sectors.
•             Policy Support and Incentives: Government policies and incentives promoting renewable energy, sustainable development, and decarbonization efforts are driving the demand for biomass refining. Supportive regulations, financial incentives, and research and development initiatives are encouraging investments in biomass refining technologies and infrastructure.
Key Points and Demand Factors:
•             Bioenergy Demand: The demand for bioenergy as a renewable alternative to fossil fuels in transportation and power generation is a significant driver for biomass refining. Biofuels derived from biomass, such as bioethanol and biodiesel, are sought after to meet renewable energy targets and reduce carbon emissions.
•             Sustainability and Environmental Concerns: Biomass refining offers a more sustainable and environmentally friendly alternative to traditional fossil fuel-based industries. The utilization of biomass feedstocks helps reduce greenhouse gas emissions, promote waste valorization, and minimize the environmental impact of energy and chemical production.
•             Renewable Chemicals and Materials: The demand for renewable chemicals and materials, such as bioplastics, bio-based polymers, and biochemicals, is growing. Biomass refining enables the production of these sustainable alternatives, driven by consumer preferences for eco-friendly products and the need to reduce reliance on petrochemicals.
•             Feedstock Availability: The availability and accessibility of biomass feedstocks, including agricultural residues, dedicated energy crops, and forestry residues, influence the demand for biomass refining. Regional biomass availability and supply chain logistics play a crucial role in determining the viability and competitiveness of biomass refining operations.
•             Technological Advancements and Cost Competitiveness: Continuous technological advancements in biomass refining processes, such as improved conversion efficiency, scalability, and cost reduction, are key factors driving market demand. The ability to produce biofuels and biochemicals at competitive prices compared to fossil fuel alternatives is essential for market growth and adoption.
We recommend referring our Stringent datalytics firm, industry publications, and websites that specialize in providing market reports. These sources often offer comprehensive analysis, market trends, growth forecasts, competitive landscape, and other valuable insights into this market.
By visiting our website or contacting us directly, you can explore the availability of specific reports related to this market. These reports often require a purchase or subscription, but we provide comprehensive and in-depth information that can be valuable for businesses, investors, and individuals interested in this market.
“Remember to look for recent reports to ensure you have the most current and relevant information.”
Click Here, To Get Free Sample Report: https://stringentdatalytics.com/sample-request/trailer-substation-market/6736/  
Market Segmentations:
Global Trailer Substation Market: By Company
• Hitachi
• Siemens
• Matelec
• Efacec
• EATON
• CG
• GE
• EKOS Group
• WEG
• Delta Star
• Meidensha Corporation
• AZZ
• Ampcontrol Pty Ltd.
• Tadeo Czerweny S.A.
• Tgood
• VRT
• Powell Industries
• Jacobsen Elektro
• Elgin Power Solutions
• Aktif Group
Global Trailer Substation Market: By Type
• HV Trailer Substation
• LV/MV Trailer Substation
Global Trailer Substation Market: By Application
• Energy
• Infrastructure
• Industrial
• Others
Global Trailer Substation Market: Regional Analysis
All the regional segmentation has been studied based on recent and future trends, and the market is forecasted throughout the prediction period. The countries covered in the regional analysis of the Global Trailer Substation market report are U.S., Canada, and Mexico in North America, Germany, France, U.K., Russia, Italy, Spain, Turkey, Netherlands, Switzerland, Belgium, and Rest of Europe in Europe, Singapore, Malaysia, Australia, Thailand, Indonesia, Philippines, China, Japan, India, South Korea, Rest of Asia-Pacific (APAC) in the Asia-Pacific (APAC), Saudi Arabia, U.A.E, South Africa, Egypt, Israel, Rest of Middle East and Africa (MEA) as a part of Middle East and Africa (MEA), and Argentina, Brazil, and Rest of South America as part of South America.
 Visit Report Page for More Details: https://stringentdatalytics.com/reports/trailer-substation-market/6736/  
Reasons to Purchase Trailer Substation Market Report:
• To obtain insights into industry trends and dynamics, including market size, growth rates, and important factors and difficulties. This study offers insightful information on these topics.
• To identify important participants and rivals: This research studies can assist companies in identifying key participants and rivals in their sector, along with their market share, business plans, and strengths and weaknesses.
• To comprehend consumer behaviour: these research studies can offer insightful information about customer behaviour, including preferences, spending patterns, and demographics.
• To assess market opportunities: These research studies can aid companies in assessing market chances, such as prospective new goods or services, fresh markets, and new trends.
• To make well-informed business decisions: These research reports give companies data-driven insights that they may use to plan their strategy, develop new products, and devise marketing and advertising plans.
In general, market research studies offer companies and organisations useful data that can aid in making decisions and maintaining competitiveness in their industry. They can offer a strong basis for decision-making, strategy formulation, and company planning.
About US:
Stringent Datalytics offers both custom and syndicated market research reports. Custom market research reports are tailored to a specific client's needs and requirements. These reports provide unique insights into a particular industry or market segment and can help businesses make informed decisions about their strategies and operations.
Syndicated market research reports, on the other hand, are pre-existing reports that are available for purchase by multiple clients. These reports are often produced on a regular basis, such as annually or quarterly, and cover a broad range of industries and market segments. Syndicated reports provide clients with insights into industry trends, market sizes, and competitive landscapes. By offering both custom and syndicated reports, Stringent Datalytics can provide clients with a range of market research solutions that can be customized to their specific needs
Contact US:
Stringent Datalytics
Contact No -  +1 346 666 6655
Email Id -  [email protected]  
Web - https://stringentdatalytics.com/
0 notes
mindblowingscience · 7 months ago
Text
Researchers at Hokkaido University have taken a significant step forward in the drive to make recyclable yet stable plastics from plant materials. This is a key requirement to reduce the burden of plastic pollution in the environment. They developed a convenient and versatile method to make a variety of polymers from chemicals derived from plant cellulose; crucially, these polymers can be fully recycled. The method was published in the journal ACS Macro Letters. Cellulose is one of the most abundant components of biomass derived from plants, being a key part of the tough cell walls surrounding all plant cells. It can be readily obtained from plant wastes, such as straw and sawdust, therefore, using it as a feedstock for polymer manufacture should not reduce the availability of agricultural land for food production.
Continue Reading.
94 notes · View notes
prachicmi · 10 days ago
Text
Tumblr media
The Steam Trap Market Will Grow at Highest Pace Owing to Rising Demand in Oil and Gas Industries
The Steam trap market involves the production of steam trap products used in steam systems to automatically release condensed air and water from steam lines, gathering systems and process equipment while keeping stem from escaping. Steam traps prevent economic and efficiency losses associated with the loss of steam from leakage. The steam trap product offerings include thermostatic, thermodynamic and other advanced steam traps suited for industrial applications.
The global steam trap market is estimated to be valued at US$ 2.32 Billion in 2024 and is expected to exhibit a CAGR of 3.8% over the forecast period 2024 to 2031. Key Takeaways Key players operating in the steam trap market are Emerson, Flowserve, Armstrong, Spirax Sarco, Schlumberger, Thermax, CIRCOR, Velan, Watts Water Technologies and others. Steam traps find widespread adoption in oil and gas, power, chemical, food & beverage and other process industries where steam is used for heating and other process requirements. With growing demand for steam traps from oil and gas industries, the market players are focusing on expanding their product portfolio and offering technologically advanced steam trap solutions suited for critical industrial applications. Growing demand in oil and gas industries:
Steam Trap Market Forecats injection plays an indispensable role in oil extraction from mature oilfields. This is propelling the demand for steam traps from oil & gas industries. Additionally, steam is widely used in LNG terminals for regasification, further driving the need for steam traps. Technological advancements:
Market players are focusing on developing innovative steam trap technologies such as thermostatic trap with advanced thermostatic elements, non-intrusive smart trap monitors and modular trap stations. This is improving functionality and enabling condition monitoring of steam traps. Market Trends Adoption of IIoT integrated steam traps: Integrating steam traps with industrial internet of things (IIoT) enables remote monitoring and predictive maintenance. Players are offering IIoT integrated smart steam traps with wireless communication capabilities. Growing demand from renewables industry: Use of steam in biomass power plants and solar thermal power production is driving the demand. Biomass plants use steam for processing biomass feedstock. Market Opportunities Greenfield LNG projects in North America and Asia: Major greenfield LNG terminals are in pipelineover the coming years. This will boost demand for high-performance steam traps. Subsea production in deepwater oilfields: Subsea production using thermostatic steam traps reduces risk of overheating and improves efficiency of offshore oil extraction. This presents opportunities. Impact of COVID-19 on Steam Trap Market Growth The Steam Trap Market News is coronavirus pandemic severely impacted in the 2020. The strict lockdowns imposed across various regions led to closure of several manufacturing plants and disruption in supply chains. This hampered the demand for steam traps from end-use industries such as power generation, oil & gas, chemical, pharmaceuticals, food & beverages, and others. With restrictions being gradually lifted in 2021, the market saw signs of recovery as manufacturing activities resumed partially. However, plants continue to operate at sub-optimal levels due to workforce shortage and constraints in logistic operations. This affected the replacement demand and new projects incorporating steam traps. The suppliers faced challenges in terms of inadequate labor, obtaining raw materials, and transporting finished products. Looking ahead, the market is anticipated to demonstrate steady growth post-pandemic. Various government initiatives to boost the manufacturing sector coupled with resumption of construction projects will propel the demand. Furthermore, rising need to improve operational efficiency and reduce energy consumption in industries will support market expansion. The key players are focusing on developing smart steam traps with advanced controls and remote monitoring capabilities to gain traction. Get more insights on, Steam Trap Market
For Deeper Insights, Find the Report in the Language that You want.
French
German
Italian
Russian
Japanese
Chinese
Korean
Portuguese
About Author:
Ravina Pandya, Content Writer, has a strong foothold in the market research industry. She specializes in writing well-researched articles from different industries, including food and beverages, information and technology, healthcare, chemical and materials, etc. (https://www.linkedin.com/in/ravina-pandya-1a3984191)
0 notes
energyandpowertrends · 11 days ago
Text
Biomass Gasification Market Size and Projections: Anticipated Growth from 2024 to 2031
Tumblr media
The Biomass Gasification Market size was valued at USD 31.58 Million in 2023 and is expected to grow to USD 64.33 Million by 2031 and grow at a CAGR of 9.3% over the forecast period of 2024–2031.
Market Overview
Biomass gasification involves the thermal decomposition of organic materials in a low-oxygen environment, resulting in the production of syngas, which primarily consists of hydrogen, carbon monoxide, and carbon dioxide. This process not only provides an efficient way to utilize waste materials but also supports the transition to a circular economy by reducing landfill waste and greenhouse gas emissions.
As governments and industries increasingly prioritize renewable energy and sustainability, biomass gasification is emerging as a key technology in the global energy landscape.
Key Market Drivers
Growing Demand for Renewable Energy: The global shift towards renewable energy sources to combat climate change is driving the adoption of biomass gasification technologies.
Waste Management Solutions: The increasing volume of agricultural, municipal, and forest waste is prompting the need for effective waste management solutions, with biomass gasification providing a viable option.
Government Support and Incentives: Numerous governments are implementing policies and providing incentives to promote the use of biomass energy, further boosting market growth.
Technological Advancements: Innovations in gasification technology are improving efficiency and reducing costs, making biomass gasification more competitive with fossil fuels.
Diverse Application Potential: Biomass gasification offers a range of applications, including power generation, transportation fuels, and chemical production, enhancing its market appeal.
Request Sample Report@ https://www.snsinsider.com/sample-request/2953
Market Segmentation
The biomass gasification market can be segmented by source, gasifier technology, application, and region.
By Source
Agricultural Waste: Includes residues from crops and other agricultural activities, which are abundant and often underutilized.
Animal Waste: Manure from livestock can be converted into energy, providing a dual benefit of waste management and energy production.
Forest Waste: Residual materials from forestry operations, such as wood chips and sawdust, are valuable feedstocks for gasification.
Municipal Waste: Organic waste from urban areas can be processed to generate energy, helping to reduce landfill burdens.
By Gasifier Technology
Fluidized Bed Gasifier: Known for its high efficiency and ability to handle a variety of feedstocks, making it popular in commercial applications.
Entrained Flow Gasifier: Utilized for high-capacity operations, ideal for large-scale biomass gasification.
Fixed Bed Gasifier: Commonly used in small-scale applications, offering simplicity and cost-effectiveness.
Others: Includes emerging and specialized gasification technologies tailored to specific applications and feedstocks.
By Application
Chemical Production: Syngas produced through gasification can be used as a feedstock for various chemical processes.
Transportation Fuel: Biomass gasification can produce biofuels, providing a renewable alternative to fossil fuels for transportation.
Power Generation: Biomass-derived syngas can be utilized in power plants for electricity generation, contributing to grid stability.
Ethanol Production: The process can support the generation of bioethanol, a widely used biofuel.
Hydrogen Generation: Biomass gasification can be a sustainable method for producing hydrogen, a key component in the transition to cleaner energy systems.
Regional Analysis
North America: The U.S. and Canada are leading markets for biomass gasification due to strong government support and investment in renewable energy technologies.
Europe: European countries are at the forefront of adopting biomass gasification, driven by stringent environmental regulations and a focus on sustainability.
Asia-Pacific: Rapid industrialization and increasing energy demands in countries like China and India are driving the growth of the biomass gasification market in this region.
Latin America: The abundance of biomass resources presents significant opportunities for market expansion in Latin America, particularly in Brazil and Argentina.
Middle East & Africa: The region is gradually recognizing the potential of biomass gasification as a sustainable energy solution, supported by government initiatives.
Buy a Complete Report of Biomass Gasification Market 2024–2031@ https://www.snsinsider.com/checkout/2953
Current Market Trends
Integration with Circular Economy: Companies are focusing on utilizing waste materials for energy production, aligning with circular economy principles.
Focus on Carbon Neutrality: Businesses are increasingly adopting biomass gasification to achieve carbon neutrality targets and enhance sustainability credentials.
Research and Development: Investment in R&D is leading to improved gasification technologies, enhancing efficiency and expanding application possibilities.
Public-Private Partnerships: Collaboration between governments and private entities is fostering the development of biomass gasification projects and supporting infrastructure.
Emergence of Small-Scale Solutions: Growing interest in decentralized energy systems is leading to the development of small-scale biomass gasification units.
Key Players: 
Bellwether Recuperative Gasification Ltd.
Valmet
Shanghai Haiqi Environmental Protection Technology Co. Ltd.
Synthesis Energy Systems Inc.
ThyssenKrupp AG
Infinite Energy Pvt. Ltd.
Conclusion
The global biomass gasification market is poised for substantial growth in the coming years, driven by the increasing demand for renewable energy, effective waste management solutions, and technological advancements. As industries and governments prioritize sustainable practices, biomass gasification will play a crucial role in transforming waste into valuable energy resources and contributing to a greener, more sustainable future.
About Us:
SNS Insider is a global leader in market research and consulting, shaping the future of the industry. Our mission is to empower clients with the insights they need to thrive in dynamic environments. Utilizing advanced methodologies such as surveys, video interviews, and focus groups, we provide up-to-date, accurate market intelligence and consumer insights, ensuring you make confident, informed decisions.   Contact Us: Akash Anand — Head of Business Development & Strategy [email protected]  Phone: +1–415–230–0044 (US) | +91–7798602273 (IND)
0 notes
dh5ryxhgbctgr · 12 days ago
Text
Malaysia Biomass Gasification Market Assessment and Future Trends 2024 - 2032
The Malaysia biomass gasification market is emerging as a crucial segment in the country’s energy landscape, contributing to sustainable energy production and waste management. As Malaysia strives to reduce its reliance on fossil fuels and address environmental concerns, biomass gasification offers a viable alternative. This article explores the key drivers, challenges, segmentation, regional insights, and future trends of the biomass gasification market in Malaysia.
What is Biomass Gasification?
Biomass gasification is a thermochemical process that converts organic materials—such as agricultural waste, wood, and other biomass—into a combustible gas called syngas. This gas can then be used for electricity generation, heating, or as a precursor for producing biofuels. The process involves high temperatures and limited oxygen, resulting in the breakdown of biomass into simpler molecules.
Types of Biomass Gasification Technologies
Fixed Bed Gasifiers: Suitable for small-scale applications, these gasifiers have a stationary bed of biomass and are often used in rural or off-grid settings.
Fluidized Bed Gasifiers: More versatile and efficient, these systems use a fluidized bed of biomass particles and are ideal for large-scale operations.
Entrained Flow Gasifiers: Designed for high throughput, these gasifiers are effective in converting biomass into syngas quickly and are typically used in industrial applications.
Market Dynamics
Growth Drivers
Rising Energy Demand: As Malaysia’s economy grows, so does the demand for energy. Biomass gasification provides a sustainable source of energy that can help meet this demand.
Government Support and Policies: The Malaysian government is actively promoting renewable energy sources through incentives and regulations aimed at reducing carbon emissions and encouraging biomass utilization.
Waste Management Solutions: Biomass gasification serves a dual purpose of energy generation and waste management, addressing the growing concerns over waste disposal in urban areas.
Challenges
Technology Adoption: The initial capital investment for gasification technology can be high, which may deter some potential investors and operators.
Feedstock Availability: Ensuring a consistent supply of suitable biomass feedstock remains a challenge, particularly in regions with competing uses for agricultural waste.
Public Awareness and Acceptance: There may be a lack of awareness about biomass gasification among potential users and investors, hindering market growth.
Market Segmentation
By Technology Type
Fixed Bed Gasifiers
Fluidized Bed Gasifiers
Entrained Flow Gasifiers
By Application
Electricity Generation
Heating
Biofuel Production
By Region
Peninsular Malaysia
East Malaysia (Sabah and Sarawak)
Regional Analysis
Peninsular Malaysia
Peninsular Malaysia is witnessing significant investments in biomass gasification projects, driven by urbanization and the increasing demand for renewable energy. The government’s commitment to sustainable energy policies is further enhancing market prospects.
East Malaysia
In East Malaysia, particularly in Sabah and Sarawak, abundant biomass resources from agricultural and forestry activities present vast opportunities for gasification projects. However, infrastructure development and accessibility remain key challenges.
Future Trends
Technological Advancements
Innovations in gasification technologies are expected to improve efficiency and reduce costs, making biomass gasification more attractive to investors and operators.
Integration with Other Renewable Sources
As Malaysia enhances its renewable energy mix, integrating biomass gasification with solar and wind energy could create hybrid systems that provide more reliable energy solutions.
Focus on Sustainability
With growing awareness of environmental issues, there is an increasing emphasis on sustainable practices in biomass gasification, such as carbon capture and utilization technologies.
Conclusion
The Malaysia biomass gasification market is poised for growth, driven by rising energy demands, supportive government policies, and a strong focus on sustainable waste management. While challenges such as technology adoption and feedstock availability persist, the future looks promising with advancements in gasification technologies and increased public awareness. As Malaysia continues its transition toward renewable energy, biomass gasification will play a vital role in shaping the country’s energy landscape, contributing to a greener and more sustainable future.
More Trending Reports
Heat Transfer Fluid Market Growth
Solar PV Mounting Systems Market Growth
Oilfield Services Market Growth
Floating Solar Panels Market Growth
0 notes
businessindustry · 20 days ago
Text
0 notes