#structural defects repair services

[promptbuildinginspection]

Structural Defects Inspection Services in Perth

Here at Prompt Building Inspections, we take great pride in our expert judgement, authority, and prompt service. Since we understand the importance of precise and comprehensive findings when it comes to Major Structural Defects Inspection Services in Perth, we provide clients with in-depth reports that highlight any faults detected during the inspection.

Our genuine structural fault inspection services can help you in the following ways:

Peace of Mind: Our inspection services give you the confidence you need to make informed decisions when buying or selling a property.

Expertise: Our certified inspectors are capable of identifying any major defects that may threaten the property's value and safety.

Savings: Catching significant structural flaws early will save you money on future repairs.

Compliance: Our inspection services provide the assurance that your home conforms to all relevant building regulations and laws.

At Prompt Building Inspection, we are committed to providing you with the best severe structural problem inspection services in Perth. Contact us now to set up an inspection and start the process of ensuring the safety and value of your home.

[usafphantom2]

17 years after a USAF F-15 crashed due to cracks in the jet’s longeron the same issue appeared on 90 F-16 fighters across the entire service inventory

Cracks in canopy sill longeron appeared on 90 USAF F-16 fighters

The Colorado Air National Guard’s 140th Maintenance Group (MXG) at Buckley Air Force Base recently had two of their own F-16s grounded simultaneously due to cracked canopy sill longerons (CSLs).

As the airframe has aged, it required these airmen to incorporate new and innovative maintenance practices to remain at the forefront of discovering new means of increasing airpower efficiency to ensure the fighter jets remain mission capable and ready to defend the nation 24/7.

US Air Force (USAF) Staff Sgt. Danielle M. Morgan and Tech. Sgt. Taylar M. Reilly, led one of these new practices as they repaired canopy sill longerons. The CSLs run the full length of the cockpit and support the structure between the frame and skin of the aircraft, preventing tension and bending of the fuselage.

“The aircraft is immediately grounded when the canopies crack,” Reilly said to Staff Sgt. Luccario Lovato, 140th Wing Public Affairs, for the article Colorado Air National Guard Maintenance Group creates innovative solution to aging F-16. “A crack can spread, and if both sides break, the whole nose could fall off.”

17 years after a USAF F-15 crashed due to cracks in the jet's longeron the same issue appeared on 90 F-16 fighters across the entire service inventory

A US Air Force (USAF) F-16C Fighting Falcon, 120th Fighter Squadron (FS), 140th Fighter Wing (FW), Colorado Air National Guard (COANG).

Cracks in F-16 canopy sill longeron can become a fleet-wide issue

Canopy sill longeron cracking has already appeared in 90 aircraft across the USAF inventory of F-16s within the past year.

The F-16 can fly at twice the speed of sound, pulling up to 9-G turns (9 times the earth’s gravitational force) to accomplish air-to-air and air-to-ground missions, applying significant strain to an aging aircraft. While structural concerns are not new, structural maintenance is usually done at a depot facility.

“While this isn’t the first time we’ve done this specific task, this is the first time that we’ve had two aircraft with this issue at the same time,” Reilly said.

Reilly also explained that the structural integrity of the longeron is getting worse, and suspects it’ll become a fleet-wide issue.

Noteworthy, according to Alert 5, similar cracking issues plagued the USAF F-15 Eagle fleet in the past. In 2007 an F-15C suffered an in-flight break-up because of a defective longeron supplied by Boeing. The mishap, that took place during a training mission, resulted in a significant grounding event.

Similar cracking issues plagued the USAF F-15 Eagle fleet in the past

Wild Weasel F-16C print

This print is available in multiple sizes from AircraftProfilePrints.com – CLICK HERE TO GET YOURS. F-16CM Fighting Falcon – Wild Weasel 50th Anniversary, 2015

The Eagle destroyed in that incident was from the 131st Fighter Wing of the Missouri Air National Guard. On Nov. 2, 2007 the aircraft departed on a standard training sortie. The F-15C, flown by Maj. Stephen Stilwell, experienced a violent shudder in its forward fuselage approximately 20 minutes after departing from an airfield near St. Louis. Then the aircraft broke up at an altitude of 18,000 feet above the ground. Major Stilwell managed to eject safely (despite sustaining a dislocated left shoulder and a fractured left arm) just before the aircraft broke apart, scattering debris across the Missouri countryside.

As reported by The Seattle Times, investigators traced the cause of the accident to the jet’s longeron. The investigation revealed that the longeron in question exhibited a non-uniform thickness, failing to meet the 0.10-inch (0.25 centimeter) specification outlined in the Boeing contract. The measured thickness ranged between 0.039 and 0.073 inches, a significant deviation that compromised the structural integrity of the longeron.

A comprehensive inspection program for all F-15 A-D models in the USAF followed the investigation into the crash of the F-15C. As a result, all 441 of the F-15 fighter interceptors were temporarily sidelined. The inspections revealed that a concerning number, a total of 182 aircraft, had longerons that didn’t meet original manufacturing specifications.

After undergoing additional inspections as the investigation was completed, most of the grounded F-15s were cleared to return to flight by February 2008.

F-15 model

This model is available from AirModels – CLICK HERE TO GET YOURS.

Photo credit: SMSGT JOHN P. ROHRER / U.S. Air Force

Dario Leone

Dario Leone is an aviation, defense and military writer. He is the Founder and Editor of “The Aviation Geek Club” one of the world’s most read military aviation blogs. His writing has appeared in The National Interest and other news media. He has reported from Europe and flown Super Puma and Cougar helicopters with the Swiss Air Force.

@TAGC17 via X

[uavisuals]

UAVISUALS: Leading Australia’s Drone Inspection and Data Solutions with Precision and Innovation

Industries across Australia are transforming through the power of drone technology, and UAVISUALS stands at the forefront of this revolution. UAVISUALS offers advanced drone inspections and data solutions to enhance safety, efficiency, and data accuracy across multiple sectors. From construction and energy to environmental monitoring, UAVISUALS empowers industries to leverage aerial data insights that drive better decision-making and operational excellence.

Rethinking Inspections with Drone Technology

Traditional inspection methods are often labor-intensive, costly, and risky, requiring personnel to access difficult or dangerous locations. UAVISUALS redefines this process with drone technology, providing safe, efficient, and detailed inspections without the need for scaffolding, cranes, or extensive downtime. Licensed by the Civil Aviation Safety Authority (CASA), UAVISUALS brings a high standard of safety and regulatory compliance to every mission.

With drones equipped with high-resolution cameras, UAVISUALS captures precise visuals of assets such as power lines, towers, bridges, and rooftops, identifying potential issues before they escalate into costly repairs or operational interruptions. This proactive approach enables companies to conduct timely maintenance, reduce costs, and extend the life of their assets.

Comprehensive Data Solutions Across Industries

UAVISUALS is not just an inspection provider; it’s a full-spectrum data solutions partner. The company offers specialized services tailored to meet the diverse needs of Australia’s industries, including:

Asset and Infrastructure Inspections: UAVISUALS conducts thorough inspections on a wide range of industrial assets, capturing data from hard-to-reach places with exceptional clarity. Their drones can identify issues like corrosion, structural defects, and equipment wear, helping clients address maintenance needs efficiently.

3D Mapping and Topographic Surveys: Using photogrammetry and LiDAR, UAVISUALS generates accurate 3D models and maps, ideal for construction planning, urban development, and land management. These models provide essential measurements and an overall view that enhances precision for project managers, architects, and engineers.

Thermal Imaging and Fault Detection: UAVISUALS’ thermal drones detect temperature anomalies that signal equipment malfunctions or energy inefficiencies, making them invaluable for industries such as renewable energy, utilities, and manufacturing. By spotting issues early, clients can implement corrective actions, reducing risks and avoiding potential failures.

Environmental Monitoring: For agricultural and environmental applications, UAVISUALS offers drone solutions that monitor vegetation health, water quality, and land use. These insights are crucial for sustainable farming practices, conservation efforts, and ecological studies.

Empowering Australian Businesses with Actionable Insights

At UAVISUALS, the goal is not just to collect data but to provide clients with insights they can act on. The UAVISUALS team consists of experienced drone operators, data analysts, and industry experts who turn raw data into meaningful reports and recommendations. Whether it’s helping clients plan maintenance, optimize resource usage, or monitor environmental impacts, UAVISUALS delivers actionable insights that drive smarter, more informed decisions.

Their services streamline processes, save time, and enhance safety, allowing clients to focus on core operations while UAVISUALS handles data capture and analysis. From routine inspections to complex surveys, UAVISUALS’ solutions make data accessible, understandable, and highly relevant to each client’s objectives.

Pioneering the Future of Drone Technology in Australia

As demand for drone technology grows, UAVISUALS remains committed to staying at the cutting edge. The company continually invests in the latest drone models, advanced imaging technology, and data processing tools to ensure clients receive the best solutions available. This dedication to innovation positions UAVISUALS as a leader in the evolving drone services industry, ready to meet the changing needs of Australian businesses.

For companies looking to integrate advanced data solutions, UAVISUALS offers a partnership that combines technological excellence with practical expertise. By transforming how businesses approach inspections, mapping, and monitoring, UAVISUALS enables a safer, smarter, and more sustainable future across Australia.

[repairfoundation]

Slab Foundation Repair: Ensuring Stability and Longevity with Foundation Solutions

A solid foundation is essential for any structure, and slab foundations are among the most common types used in residential and commercial buildings. However, over time, slab foundations can develop issues that compromise the stability and safety of your property. At Foundation Solutions, we specialize in slab foundation repair, offering expert services to address and resolve these problems. In this blog post, we will explore the causes of slab foundation issues, the benefits of timely repairs, and why Foundation Solutions is your best choice for foundation repair services.

Common Causes of Slab Foundation Problems

Several factors can contribute to the deterioration of slab foundations. Understanding these causes can help in identifying issues early and seeking appropriate repairs:

Soil Movement: Changes in soil moisture levels can cause the ground to expand and contract, leading to foundation shifts and cracks.

Poor Drainage: Inadequate drainage systems can lead to water accumulation around the foundation, causing erosion and weakening the slab.

Tree Roots: Expanding tree roots can exert pressure on the foundation, leading to cracks and displacement.

Construction Defects: Poor construction practices, such as inadequate soil compaction or use of substandard materials, can compromise the foundation’s integrity.

Seismic Activity: In areas prone to earthquakes, seismic activity can cause significant damage to slab foundations.

Signs of Slab Foundation Issues

Identifying the early signs of slab foundation problems can help prevent more extensive damage. Look out for the following indicators:

Cracks in walls, floors, or the foundation itself

Uneven or sloping floors

Sticking doors or windows

Gaps between walls and ceilings or floors

Water pooling around the foundation

Benefits of Timely Slab Foundation Repair

Addressing slab foundation issues promptly offers several benefits, including:

Preventing Further Damage: Early intervention can stop minor issues from escalating into major structural problems.

Maintaining Property Value: A stable foundation preserves your property’s market value and aesthetic appeal.

Ensuring Safety: Timely repairs protect your family or occupants from potential hazards caused by a compromised foundation.

Reducing Repair Costs: Addressing problems early can save you from more expensive repairs in the future.

Our Slab Foundation Repair Process

At Foundation Solutions, we follow a comprehensive and meticulous process to ensure effective slab foundation repairs. Here’s how we do it:

Inspection and Assessment: Our experts conduct a thorough inspection to identify the root cause and extent of the foundation damage.

Customized Repair Plan: Based on the assessment, we develop a tailored repair plan that addresses the specific issues affecting your foundation.

Soil Stabilization: We stabilize the soil around and beneath the foundation to prevent further movement and ensure a solid base.

Crack Repair: Using high-quality materials and advanced techniques, we repair any cracks in the foundation to restore its integrity.

Piering and Underpinning: For more severe issues, we may install piers or use underpinning techniques to provide additional support and stabilize the foundation.

Waterproofing and Drainage Solutions: To prevent future water-related problems, we implement effective waterproofing and drainage solutions around the foundation.

Final Inspection: We conduct a final inspection to ensure all repairs meet our high standards of quality and durability.

Why Choose Foundation Solutions?

Selecting the right company for your slab foundation repair needs is crucial. Here’s why Foundation Solutions is the best choice:

Experience and Expertise: With years of experience, our team has the knowledge and skills to handle any foundation issue.

Customer Satisfaction: We prioritize customer satisfaction, delivering high-quality results that meet your expectations.

Advanced Technology: We use the latest equipment and techniques to ensure precise and efficient repairs.

Transparent Pricing: Our pricing is clear and upfront, with no hidden fees, so you know exactly what to expect.

Guaranteed Results: Our work comes with a guarantee, giving you peace of mind that your foundation is built to last.

Case Study: Successful Slab Foundation Repair

Recently, we completed a project for a homeowner whose slab foundation had significant cracks and settlement issues due to soil movement. Our team conducted a comprehensive assessment and implemented a customized repair plan, which included soil stabilization, crack repair, and the installation of piers for additional support. The result was a stable and secure foundation that restored the integrity of the home and prevented further damage.

Contact Us Today

If you’re experiencing issues with your slab foundation, don’t wait for the problem to worsen. Contact Foundation Solutions today for expert advice and professional slab foundation repair services. Let us help you maintain a strong, stable, and safe foundation for your property.

At Foundation Solutions, we are dedicated to providing top-quality slab foundation repair services that exceed your expectations. Trust us to deliver the strength and stability your property needs, ensuring long-term safety and reliability.

Tagged Foundation Repair, Foundation Solutions, Slab Foundation Repair

[housing-disrepair-claims1]

Addressing Housing Disrepair: Ensuring Safe and Healthy Homes

If you have ever experienced issues like leaking roofs, faulty heating systems, or mold infestations in your rented accommodation, you are not alone. Housing disrepair is a prevalent problem that affects millions of tenants worldwide, leading to various health, safety, and financial concerns. In this article, we delve into the intricacies of housing disrepair, its causes, impacts, legal rights of tenants, and measures to address and prevent such issues.

Introduction to Housing Disrepair

Housing disrepair refers to the state of a property that has fallen into a state of neglect or deterioration due to the failure of the landlord to maintain it adequately. This can encompass a wide range of issues, including structural defects, dampness, pest infestations, electrical faults, and plumbing problems. While some landlords promptly address maintenance issues, others may neglect their responsibilities, leaving tenants to live in substandard conditions.

Common Causes of Housing Disrepair

Several factors can contribute to housing disrepair, including poor construction, lack of regular maintenance, and environmental factors such as extreme weather conditions. Structural issues like cracked walls, unstable foundations, and leaking roofs are often the result of long-term neglect. Damp and mold thrive in poorly ventilated or damp environments, posing health risks to occupants. Plumbing and heating problems, such as burst pipes and malfunctioning boilers, can disrupt daily life and compromise safety.

Impact of Housing Disrepair

The consequences of living in a property with disrepair issues extend beyond mere inconvenience. Chronic exposure to dampness and mold can exacerbate respiratory conditions like asthma and allergies, leading to respiratory infections and other health problems. Additionally, living in substandard conditions can take a toll on mental well-being, causing stress, anxiety, and depression. Moreover, tenants may incur additional expenses for temporary accommodation or medical treatment, further exacerbating their financial strain.

Legal Rights of Tenants

Tenants have legal rights regarding housing disrepair, and landlords are obligated to maintain their properties to a certain standard. In the UK, the Landlord and Tenant Act 1985 outlines the landlord's responsibilities, including ensuring the property is safe, structurally sound, and free from hazards. Tenants have the right to request repairs in writing and, if necessary, take legal action to enforce their rights. Options include contacting local housing authorities, seeking assistance from legal aid services, or pursuing compensation through the courts.

Steps to Take When Facing Housing Disrepair

If you encounter housing disrepair issues in your rented accommodation, it's essential to take action promptly. Start by reporting the problem to your landlord or letting agent in writing, providing details of the issue and requesting repairs within a reasonable timeframe. Keep records of all communications, including photographs or videos of the disrepair, as evidence. If the landlord fails to address the issue, seek advice from a housing solicitor or advocacy organization to explore your legal options.

Resources Available for Tenants

Fortunately, tenants have access to various resources and support services to assist them in dealing with housing disrepair issues. Local housing authorities can provide guidance on tenants' rights and mediation services to resolve disputes between landlords and tenants. Legal aid services offer free or low-cost legal advice and representation to individuals facing housing-related issues. Additionally, community organizations and charities may offer practical support, advocacy, and educational programs to empower tenants.

Preventive Measures

Prevention is key to avoiding housing disrepair issues in the first place. Tenants can protect themselves by conducting regular inspections of their rental properties and promptly reporting any maintenance concerns to the landlord. Familiarize yourself with your tenancy agreement and understand your rights and responsibilities regarding property maintenance. By taking proactive measures and addressing minor issues early on, you can prevent larger problems from developing and ensure a safe and habitable living environment.

Conclusion

Housing disrepair is a significant issue that can have far-reaching consequences for tenants' health, safety, and well-being. By understanding their legal rights, seeking appropriate assistance, and taking proactive measures, tenants can effectively address and prevent housing disrepair issues. It is crucial for landlords, policymakers, and community stakeholders to collaborate in ensuring that all residents have access to safe, healthy, and adequately maintained housing.

FAQs

What are the landlord's responsibilities regarding housing disrepair? Landlords are responsible for maintaining their properties in a safe and habitable condition, including addressing any disrepair issues promptly.

How long does a landlord have to make repairs? Landlords should address repair requests within a reasonable timeframe, typically within 14 to 30 days, depending on the severity of the issue.

Can tenants withhold rent if repairs are not made? In some cases, tenants may be able to withhold rent or deduct the cost of repairs from their rent if the landlord fails to address the issue within a reasonable timeframe.

What if the landlord refuses to make repairs? If the landlord refuses to make necessary repairs, tenants can seek legal advice and explore options such as contacting local housing authorities or taking legal action.

[wedesignyouny]

Offering Solace: The Importance of Home Inspection in Nassau County

Providing Comfort: The Significance of House Inspection in Nassau

Acquiring a home is a big monetary commitment, so you need to be fully informed about the property's condition to make sure your investment is sound. In Nassau, where houses differ in terms of age and design, a thorough house inspection is an essential part of the purchasing process. Your reliable home inspection partner, Safe Harbor Inspections, is essential in giving potential homeowners the knowledge they need to make wise decisions. This blog post discusses the value of home inspections in Nassau and how Safe Harbor Inspections establishes the bar for comprehensive and trustworthy examinations.

The Benefits of Nassau Home Inspections

1. Identifying Potential Issues:

Nassau's diverse housing stock includes properties of varying ages and construction types.

A home inspection brings to light potential issues such as electrical problems, plumbing issues, and structural concerns, allowing buyers to make informed decisions.

2. Assessing Safety Standards:

Ensuring that the home adheres to safety standards is paramount.

Home inspectors in Nassau evaluate elements like electrical systems, carbon monoxide detectors, and fire safety to guarantee a secure living environment.

3. Uncovering Hidden Defects:

Some defects may not be apparent during a casual walkthrough.

Home inspections reveal hidden defects like water damage, mold, and structural issues that might not be immediately visible to the untrained eye.

4. Negotiation Leverage:

Armed with information from a home inspection, buyers can negotiate repairs or adjustments to the sale price.

This can be a valuable tool in ensuring a fair transaction for both parties.

Safe Harbor Inspections: Raising the Bar

1. Experienced and Certified Inspectors:

Safe Harbor Inspections boasts a team of experienced and certified home inspectors.

Their knowledge extends to Nassau's unique housing characteristics, ensuring a comprehensive assessment.

2. Thorough Evaluation of Structural Elements:

From the foundation to the roof, every structural element is meticulously inspected.

This includes assessing the integrity of walls, floors, ceilings, and the overall stability of the property.

3. Detailed Reports:

Safe Harbor Inspections provides clients with detailed reports.

These reports include photographs and descriptions of any identified issues, empowering clients with a clear understanding of the property's condition.

4. Focus on Safety and Code Compliance:

Evaluating safety features and code compliance is a priority.

Safe Harbor Inspections ensures that homes meet or exceed safety standards for the well-being of the occupants.

5. Client Education:

Safe Harbor Inspections believes in empowering clients with knowledge.

Clients are encouraged to attend the inspection, ask questions, and gain insights into the maintenance and care of their prospective homes.

Invest Safely with Safe Harbor Inspections Inc.

A home inspection is an essential step in guaranteeing a safe and prudent investment in Nassau, where the real estate market is diverse. Safe Harbor Inspections is a dependable collaborator that is dedicated to offering thorough assessments and equipping customers with the information they require to make wise choices.

Uncover more about the services delivered by Safe Harbor Inspections Inc., then move on with the purchase of a house with assurance knowing that your investment is in capable hands.

[leeahqueen]

The Remaining Dust Trio (CER-06)

(note: CER-05 was just a battle node)

Accompanied by a burst of smoke and dust, a massive ‘convoy’ stopped in front of the Cerberus.

Because Vera couldn’t tell whether these things were cars or not, some looked like bald sea urchins and some looked like watermelons covered with toothpicks.

What they have in common is that they all have wheels.

Vera: What are these people here for? Are they performing a show?

No.21: Hostile…hiss…

Noctis: Damn, the taste of this decoration is too bad…

???: Hey! You guys!

A man looked like a leader stepped put of the “watermelon full of toothpicks”, and behind him stood a group of strangely dressed minions.

???: Either give us money or die!

???: Or… you can also join our Oil Residue Gang.

Vera: Who is this person? Noctis, did you hire some clown privately to entertain me?

Noctis: …Do I have such bad taste?

No.21: Very bad.

Noctis: Hey! In the activity held by the execution team last time, my design won the ranking!

Vera: Ah, are you talking about the grenade with the image of No.21?

No.21: Huh!?

No.21: The grenade on No.21… Noctis?

Noctis: Yes, the grenade without a safety catch, it seems like that person from the Art Association, Lei or something …. Is working on it right?

Noctis: Let’s not talk about whether it looks good or not, but it is definitely explosive enough—

BANG—

The bullet pointed toward the sky along the rifling but failed to stir up any echo in the wasteland.

Boss: Listen… to… ME!

Even this roar with a hint of humiliation seemed very dull in the wilderness.

Vera: Yo, who do you think you are?

Vera: What, is giving people pleasure an add-on to your car repair service?

Boss: Even if you didn’t pay, you broke the things under my hands.

Noctis: What? What did we do?

Boss: Those are all my treasures!

The boss said, pointing to the pile of scrap metal with a small amount of Punishing in the back compartment of the Cerberus car.

Noctis: It seems that your taste is indeed quite bad, not as good as three or seven cents…

No.21: That’s the trophy for No.21.

Vera: We help you deal with these infected, you help us repair the car. Isn’t that a deal?

Boss: [Beep beep] yeah, then you are lucky and not dead!

Boss: Now you have only two ways to go! Either give us money or your life!

As soon as the auto repair boss waved, a group of strangely dressed structures jumped out of the massive convoy behind him, and there were even a few cars with eyeglasses on them.

Noctis: That’s it…

No.21: It’s the enemy’s breath…

Noctis: So, are you threatening us?

Vera: Since you haven’t heard of the Cerberus…

Vera pointed her flag gun at her opponent defiantly.

Vera: Then let me give you a taste.

The explosions and thunder finally calmed down, replaced by flames roaring in the wind of the wilderness.

Boss: You… don’t come here!

Stepping on the remains of equipment on the ground, it seemed that the Cerberus was the vicious bandit.

But the real bully was like a child who dared not to go the bathroom late at night, trembling holding a bag of explosives and retreating step by step.

Vera: What a hassle.

Vera: With so many defective constructs of unknown origin, the Cerberus will be renamed Special Volunteers of the Purifying Force from now on.

Noctis: They are all scum with no more than 0.5 combat effectiveness.

Vera: No matter what, we can’t work in vain! And these trivial matters can only delay us from completing the task.

Vera gave Noctis a dirty look.

Vera: Look what kind of rubbish you’ve attracted.

No.21: Captain, that’s an explosive.

Boss: You… don’t move! I have explosives that can destroy a whole village.

Vera: Oh? That’s really curious.

Vera continued walking in the direction of the auto repair shop owner provocatively.

Vera: None of your people can continue fighting, and you are the only one left.

Boss: I… there’s someone above me!

Boss: Don’t think that nothing will happen to me if you win!

Boss: Someone protect me! If I say his name, I might scare your inverse device!

Vera: I really want to see it.

Vera: Or are you just a useless coward who doesn’t dare to blow up yourself and us?

Despair is like a rope, and the man’s fearful trembling is transmitted along this rope. The closer Vera got, the more the rope wound around his neck, forming a noose with nowhere to escape.

It’s just that the executioners all wear masks, but Vera doesn’t.

Boss: You, don’t force me—

BANG—

The sound of gunfire dissipated so quickly in the open wilderness, and the person fell to the ground like a torn bag.

Vera: Huh…

No.21: The direction of the bullet is…

Huzi: There’s no use talking nonsense to him.

“Huzi” carefully wrapped the gun in the cloth and limped to his feet.

Huzi: If this madman really detonates a bomb, you constructs should be fine.

Huzi: These things I brought with me will definitely suffer disaster. And these minions might blow up too… get out of here!

‘Huzi’ ‘s hoarse and deep voice drove away the strangely dressed minions, who immediately scurried away.

Huzi: It’s just a bunch of rabbles anyway…

Huzi: You… are from the Sky Garden, right?

Huzi: I’ve seen the logo on you, the mark.

Vera: Are you from there too?

Huzi: No, I saw it a long time ago.

Huzi: What I want to say is that this is a lawless place, and no one will recognize the authority of the Sky Garden.

Huzi: Bad people are bad… good people have to be worse than bad people.

‘Huzi’ shook the holstered gun.

Huzi: He is going to die anyway, and you can’t scare him into being a good person with your words, so this is the best way to go.

Noctis: Well… then our views are very consistent!

Noctis: No more nonsense, just get started, I like it!

Huzi: Ha! Ha! Ha! You…

Noctis held ‘Huzi’ ‘s arm, as if they had reached some agreement.

Vera chuckled, picked up the old explosives the auto repair shop boss was holding, picked them up on the flag gun, and turned away.

Vera: No.21, take all the junk with you.

No.21: Got it. Do you want to clean up the battlefield?

Vera: No, just take away the pile of ‘motorcycle’.

Vera: The rest of these things will always be picked up by someone passing by.

No.21 nodded, and without any hesitation, she picked up all the broken parts and tied them to the rear compartment of the car.

No.21: Is this, okay?

Vera: That’s fine, it’s just a pile of junk anyway.

Vera opened the car door, and after visibly hesitating, carefully placed the explosives on the back seat of the car.

Vera: No.21, you sit in the front passenger seat.

Vera: You two, hurry up!

Vera said to the limping Huzi and Noctis who was joking behind.

READ: CER-04 | CER-06 | CER-07

[earaercircular]

The Recyclerie sportive in Lyon is in great shape

In the Duchère district, it is a booming business that is developing in premises of 300 m² dedicated to the repair and sale of sporting goods to raise awareness of zero waste sport.

La Recyclerie sportive[1], a national association for the collection, recycling, reuse and resale of second-hand sports equipment, has nine branches in the country. The one in Lyon opened in August 2021 on Avenue du Plateau, the shopping street of the Duchère district[2]. For Alexandra Pinto, manager and creator of this boutique-workshop-activity space, the establishment in the heart of this popular eco-district well equipped with sports equipment was “meaningful and obvious”. Among the main objectives of La Recyclerie is the promotion of sport for all and of responsible and zero waste sports activities.

Renew, repair, mend

La Recyclerie is primarily a shop selling sports, technical and textile equipment, donated by individuals, companies (unsold items, customer returns, defective items) but also partner sports structures, including the Lou Rugby club and climbing halls. “The material that we recover – four tonnes over the first four months of 2023 – is generally in good condition, thanks to the awareness of our donors and the organisers of collection points: we achieve a reuse rate of 75%, after sorting and possible repair”, says Alexandra Pinto. The selling prices of the products are deliberately very low, accessible to all but subject to an annual subscription of 5 euros.

However, La Recyclerie is much more than just a solidarity shop. It organises sports equipment co-repair workshops in its 300 m² premises, two afternoons a week: for a subscription of 15 to 25 euros (including the support of a technician, the provision of tools and spare parts and access to the shop), individuals can come and change the brakes or adjust the gearing system of their bike, renew the strings of their racket, repair their rollerblades or their scooter, mend their kimono or their torn football shirt… The branch also hosts the distribution of organic baskets from Amap de la Duchère[3], created by residents, as well as yoga classes.

Zero waste sports

Place of life and activities, with 1,150 members who live or work for the majority of them in the district, the Recyclerie employs two employees and two work-study students and benefits from the skills of volunteers. The structure is booming, with a third employee being recruited, particularly in the face of strong demand for outsourced workshops: manufacture of everyday or decorative objects from recovered sports equipment, workshops to learn how to extend the lifespan of its means of mobility, awareness of zero waste and anti-waste sport...

“Much remains to be done, our promotion of a circular economy is far from convincing the majority of Lyonnais,” smiles Alexandra Pinto. She works on a strong link with recycling centres, where too much unused equipment still ends up and calls for a change of mentality, an alternative to buying new: "Second-hand is neither poor quality nor dirty, but a real way to equip yourself!”

Source

François Carrel, A Lyon, la Recyclerie sportive en grande forme, in : Libération, 8-05-2023 ;

[1] https://recyclerie-sportive.org/  Le projet de la Recyclerie Sportive est né en juin 2015 de la rencontre de deux acteurs, respectivement du milieu du sport et de la gestion des déchets. Inscrite dans l’économie circulaire, la Recyclerie Sportive fournit des biens et des services de manière durable, en limitant la consommation et le gaspillage de ressources (matières premières, eau, énergie) ainsi que la production des déchets. Il s’agit de rompre avec le modèle de l’économie linéaire (extraire, fabriquer, consommer, jeter) pour aller vers un modèle économique « circulaire » dans le domaine du sport. L’association a pour but de favoriser l’accès au sport à tous et de prioriser le développement de l’emploi local et l’insertion professionnelle de personnes en difficultés.

Les fondateurs ont repensé les problématiques environnementales du sport afin d’y apporter des solutions : comment chacun peut agir pour réduire son impact sur l’environnement, même dans le domaine du sport ? Comment le sport peut-il faire converger les consciences vers un développement soutenable et respectueux de son environnement ? Parmi toutes les problématiques sociales et environnementales du sport, trois majeures ont été relevées :

– les déchets sportifs

– le « fast sport » et les moyens de transport énergivores

– l’accès au sport pour tous.

[2] La Duchère is an eco-district of Lyon and a concerted development zone of approximately 120 hectares located in the 9th arrondissement. The district of La Duchère, labelled eco-district in 2013 located on the 3rd hill of Lyon in terms of altitude, dominates the Saône by forming the plateau of West Lyonnais. The district is often defined as being the third hill of Lyon, after Fourvière and La Croix-Rousse.

[3] The AMAP, Association for the Maintenance of Peasant Agriculture, are solidarity partnerships between one or more peasants and a group of citizens. https://amap-aura.org/quest-ce-quune-amap/

[dansmeak]

Identify and Prevent Asphalt Shingle Roofing Problems

Protect Your Home with Regular Asphalt Shingle Roof Inspections and Maintenance

ACME Home Exteriors in Okemos, Michigan, is a trusted roofing company. They provide homeowners with comprehensive roofing services and maintenance to help ensure the longevity of their roofing systems.

When it comes to asphalt shingle roofing, early identification and prevention of problems are crucial. Regular inspections and maintenance can detect potential roof damage before it becomes a major issue. ACME Home Exteriors advises homeowners to schedule regular roof inspections to identify worn-out shingles and defective components that can cause leaks, mold growth, and other problems.

What Affects Asphalt Roof Shingles?

Weather damage

Asphalt shingles are susceptible to weather damage, especially hail, and high winds. These extreme weather conditions can cause torn or missing shingles, granule loss, and discoloration. Severe weather conditions are common in Michigan. Therefore, it's essential to hire a qualified roofing contractor to examine the roof for signs of damage and assess its condition. ACME Home Exteriors has a team of experienced professionals who are well-versed in identifying and repairing issues related to asphalt shingle roofing.

Water damage

In addition to weather damage, moisture, mold growth, and leakage can cause problems for asphalt shingle roofing. Water can seep through the shingles and cause damage to the underlying structures. Mold growth can result from trapped moisture, and leakage can cause significant damage to the roofing system and the home's interior. Homeowners are advised to take quick action when they notice these issues.

ACME Home Exteriors also reminds homeowners to pay attention to the ventilation requirements when installing new shingles. Proper ventilation helps maintain the attic's temperature and moisture levels and prevent moisture buildup. Inadequate ventilation can cause the shingles to age prematurely and damage the roofing system.

Damage by creatures

Creatures like birds or rodents can damage roofing. They may build nests or chew through the decking of the roof. 

Wear and tear

As roofs age, they bear the wear and tear of weather changes and the physical stress they are subjected to. 

In some cases, replacement may be necessary if significant damage has already occurred due to severe weather events or other acts of nature. Tear-offs and replacement procedures should only be performed by trained professionals to avoid further costly repairs down the line due to improper installation.

When assessing a roof for potential damage, getting a professional's opinion before attempting any repairs is important. Homeowners may be tempted to repair their roofs, but this can be dangerous, especially for inexperienced people. ACME Home Exteriors recommends seeking professional help for any roof repairs or replacements.

ACME Home Exteriors encourages homeowners to undertake regular inspections of asphalt shingle roofs, both visually and through detailed records stored in the property's maintenance log book. By monitoring changes in the appearance or condition of asphalt shingles regularly, any potential issues can be identified quickly, and preventative action may be taken before further damage occurs.

Signs of damaged asphalt shingles

Missing shingles

Bruised shingles

Curled shingles

Blistered shingles

Cracked shingles

Missing granules

In conclusion, identifying and preventing problems with asphalt shingle roofing is essential to the longevity of the roof system. Homeowners are advised to hire a qualified roofing contractor to regularly assess their roofing system's condition. ACME Home Exteriors in Okemos, Michigan, provides comprehensive roofing services and maintenance to help ensure the longevity of their roofing systems. They have a team of experienced professionals who can identify and repair issues related to asphalt shingle roofing. Homeowners are encouraged to seek professional help for roof repairs or replacements and to undertake regular inspections of asphalt shingle roofs to detect potential issues early. 

Okemos, Michigan, residents can call ACME Home Exteriors at (517) 321-5890 when they suspect any problem with their asphalt roof shingles. With years of experience and a strong dedication to providing quality workmanship, they are the best choice for roofing service in Okemos, Michigan.

[usbeaches]

Florida Home Inspection Standards of Practice

61-30.801 Standards of Practice, General.

(1) Home inspections performed to these Standards of Practice are intended to provide the client with information regarding the overall condition of installed systems and components of the home based on observation of the visible and apparent condition of the structure and components at the time of the home inspection and to report on those systems and components inspected that, in the professional opinion of the inspector, are significantly deficient or at the end of their service lives. A home inspection does not include the prediction of future conditions. (2) These standards shall not be construed as limiting the scope of the inspection process in those areas where the inspector is qualified and/or has special knowledge. (3) The inspector shall inspect readily accessible, installed systems and components of homes listed in these Standards of Practice by using normal operating controls and opening readily operable access panels. Where multiple instances of the same component exist, a representative number shall be inspected. (4) The inspector shall inspect and report as required by Section 468.8323, F.S., when required by these standards, systems or components by their type and/or significant characteristics. (5) If not self-evident to the client at the time of inspection, the inspector shall give a reason why, in his or her opinion, the system or component was reported as significantly deficient or near the end of its service life. (6) The inspector shall make recommendations for correction and/or monitoring, or further evaluation of the deficiencies that the inspector observed. (7) These Standards of Practice do not limit inspectors from: (a) Including other inspection services, in addition to those required by these Standards of Practice; (b) Specifying repairs, provided the inspector is appropriately qualified; (c) Excluding systems and components from the inspection if agreed upon in writing by the inspector and client. -

61-30.802 Standards of Practice, Structure.

(1) Structural system and components include the following: (a) Foundation; (b) Floor structure; (c) Wall structure; (d) Ceiling structure; (e) Roof structure; (f) Posts; (g) Beams; (h) Columns; (j) Joists; (k) Rafters; (l) Trusses; (m) Other framing; and (n) Ventilation of foundation areas. (2) The inspector shall inspect all of the visible structural systems and components by probing structural components where deterioration is visible or suspected or where clear indications of possible deterioration exist. Probing is not required when, in the opinion of the inspector, probing would only further damage any area already identified as defective or where no deterioration is visible or presumed to exist. (3) The inspector is not required to enter or traverse any under-floor crawl space or attic, if in the opinion of the inspector: (a) An unsafe or unsanitary condition exists; (b) Enter areas in which inadequate clearance exists to allow the inspector safe entry or traversing; (c) The potential exists to cause damage to insulation, ductwork, other components or stored items. (4) The inspector is not required to provide any engineering or architectural services or offer an opinion as to the adequacy of any structural system or component. -

61-30.803 Standards of Practice, Electrical Systems.

(1) Electrical systems and components include the following: (a) Service entrance conductors, drip loop, cables, and raceways; (b) Main service equipment and main disconnects; (c) Service grounding; (d) Interior components of main service panels and sub panels; (e) Conductors; (f) Over current protection devices; (g) Readily accessible installed lighting fixtures, switches, and receptacles; (h) Ground fault circuit interrupters; (i) Amperage and voltage rating of electrical service; (j) Main disconnect(s); (k) Methods or types of wiring; (l) Smoke detectors; (m) Carbon monoxide detectors; (n) Arc fault circuit interrupters. (2) The inspector shall inspect all of the visible and readily accessible electrical systems and components. (3) The inspector is not required to inspect: (a) Remote control devices; (b) Security alarm systems and components; (c) Low voltage wiring, systems and components, ancillary wiring and systems and components not a part of the primary electrical power distribution system; (d) Generators, photovoltaic solar collectors or battery or electrical storage devices and associated equipment. (4) The inspector is not required to: (a) Measure amperage, voltage or impedance; (b) Perform a load calculation; (c) Insert any tool, probe, or device into any electrical component; (d) Determine the accuracy of circuit labeling. -

61-30.804 Standards of Practice, HVAC Systems.

(1) HVAC systems and components include heating and air conditioning systems and components and HVAC distribution systems and components. (2) Heating and air conditioning systems and components. (a) The heating and air conditioning (HVAC) systems and components include the following: 1. Installed heating equipment; 2. Fuel storage and fuel distribution systems; 3. Vent systems, flues, and chimneys; 4. Ductwork and air distribution components; 5. Mechanical ventilation systems; 6. Heating system energy source(s); 7. Heating system capacity in BTUs or kilowatts. (b) The inspector shall inspect all readily accessible heating and air conditioning systems and components. (c) The inspector is not required to inspect: 1. Interiors of flues or chimneys which are not readily accessible; 2. Heat exchangers; 3. Humidifiers or dehumidifiers; 4. Electronic air filters, sanitizers, or UV lights; 5. Solar space heating systems; 6. Internal components such as coils and pans. (3) HVAC distribution systems and components. (a) The heating and air conditioning (HVAC) distribution systems and components include the following: 1. Energy source; 2. Cooling method by its distinguishing characteristics; 3. The presence of condensate over flow warning/shutoff devices. (b) The inspector shall inspect readily accessible HVAC distribution systems. (c) With regards to HVAC distribution systems, the inspector is not required to inspect: 1. Electronic air filters, sanitizers, or UV lights; 2. Humidistats; 3. Automatic HVAC zoned systems, dampers, controls, that are not readily accessible; 4. Removable window air conditioning systems. (3) The inspector is not required to: (a) Determine heat supply adequacy or distribution balance; (b) Operate heat pump systems when ambient temperatures pose the potential for damage to the air conditioning system; (c) Determine cooling supply adequacy, distribution balance or indoor air quality; (d) Operate the air conditioning system when ambient temperatures pose the potential for damage to the air conditioning system. -

61-30.805 Standards of Practice, Roof Covering.

(1) Roof covering systems and components include the following: (a) Roofing materials; (b) Flashings; (c) Skylights, chimneys, and roof penetrations; (d) Roof drainage systems; (e) Ventilation of attics; and (f) Insulation of attics. (2) The inspector shall inspect all of the visible and readily accessible roof covering systems and components. (3) The inspector is not required to inspect: (a) Components or systems that are not readily accessible; (b) Antenna or other installed accessories; (c) Interiors of flues or chimneys which are not readily accessible. (4) The inspector is not required to walk on the roof surface when, in the opinion of the inspector, the following conditions exist: (a) Roof slope is excessive to safely walk on; (b) There is no safe access to the roof; (c) Climatic conditions render the roof unsafe to walk on; (d) Condition of the roofing material or roof decking renders the roof unsafe to walk on; (e) Walking on the roof may cause damage to the roof covering materials; and (f) Walking will place any liability or danger to the homeowner or other representatives involved in the home inspection process. (5) The inspector is not required to disturb insulation. -

61-30.806 Standards of Practice, Plumbing System.

(1) Plumbing systems and components include the following: (a) Interior water supply piping and distribution systems including all fixtures, faucets, and components; (b) Drain, waste and vent systems, including all plumbing fixtures; (c) Plumbing related vent systems, flues, and chimneys; (d) Drainage sumps, sump pumps, and related piping; (e) Materials used for water supply, drain, waste, and vent piping; (f) Water heating equipment including the energy source; (g) Main water and main fuel shut-off valves. (2) The inspector shall inspect all of the visible and readily accessible plumbing systems and components. (3) The inspector is not required to inspect: (a) Wells or water storage related equipment; (b) Water conditioning systems; (c) Solar water heating systems; (d) Fire sprinkler systems; (e) Private waste disposal systems; (f) Irrigation system(s). (4) The inspector is not required to: (a) Test shower pans, tub and shower surround for leakage; (b) Operate safety valves or shut-off valves; (c) Determine whether water supply and waste disposal systems are public or private; (d) Determine the quantity or quality of the water supply, or if the function flow at the time of the inspection or thereafter will meet the client’s needs. -

61-30.807 Standards of Practice, Interior Components.

(1) The interior components that shall be inspected include the following: (a) Interior walls, ceilings, and floors; (b) Steps, stairways, and railings; (c) Counter-tops and representative number of installed cabinets; (d) Garage doors; (e) Interior and exterior doors and windows and their operating locks and latches or other opening mechanisms; (f) Insulation and vapor retarders in unfinished spaces; (g) Fireplaces and solid fuel burning appliances; (h) Vent systems, flues, and chimneys; (i) Household appliances. (2) The inspector shall inspect all of the visible and readily accessible interior components. When inspecting doors and windows, the inspector may inspect a representative number of doors and windows. The inspector shall inspect household appliances for normal operation – using normal operating controls to activate a primary function. Inspectors will not operate systems or appliances with owners’ belongings, or if there is a risk to the property being inspected. Inspectors will first review the system to be operated and use professional judgment as to whether it is safe to operate using normal operating controls and report accordingly. (3) The inspector is not required to inspect: (a) Paint, wallpaper, window treatments, and other specialty finish treatments; (b) Carpeting; (c) Window treatments; (d) Central vacuum systems; (e) Recreational facilities; (f) Fire screens and doors, if not permanently attached; (g) Seals and gaskets on fireplaces; (h) Automatic fuel feed devices; (i) Mantles and fireplace surrounds; (j) Combustion make-up air devices; (k) Heat distribution assists whether gravity controlled or fan assisted in fireplaces. (4) The inspector is not required to: (a) Open or operate any windows or doors and access covers that are permanently or temporarily secured by mechanical means, are painted shut, or are blocked by stored items or furniture; (b) Ignite or extinguish fires; (c) Light gas fireplaces or heaters, or other unlit pilot light devices; (d) Determine draft characteristics for fireplaces and chimneys; (e) Move fireplace inserts or stoves or firebox contents; (f) Disturb insulation; (g) Activate any system or appliance that is shut down, disconnected, or otherwise rendered inoperable; (h) Operate or evaluate any system, component or appliance that does not respond to normal user controls; (i) Operate any gas appliance that requires the manual lighting of a pilot light or burner device; (j) Operate any system, appliance or feature that requires the use of special codes, keys, combinations, or devices or where user manual reference is required; (k) Operate any system, component, or appliance where in the opinion of the inspector, damage may occur; (l) Determine thermostat(s) calibration, adequacy of heating elements, operate or evaluate self cleaning cycles, door seals, indicator lights, timers, clocks or timed features, defrost cycles or frost free features, or other specialist features as it applies to the appliance device; (m) Determine leakage from microwaves ovens; (n) Determine the presence or operation of back draft damper devices in exhaust devices; (o) Move any appliance; (p) Confirm operation of every control or feature of a system or appliance. -

61-30.810 Standards of Practice, Exterior Components.

(1) Exterior systems and components include the following: (a) Exterior wall cladding/siding, flashing and trim; (b) All exterior doors; (c) Attached decks, balconies, stoops, steps, porches, and their associated railings; (d) Eaves, soffits and fascias where accessible from the ground level; (e) Walkways, patios, and driveways leading to the dwelling entrances; (f) Garages and carports. (2) The inspector shall inspect all of the visible and readily accessible exterior systems and components. (3) The inspector is not required to inspect: (a) Window and door screening, shutters, awnings, and similar seasonal or protective accessories and devices; (b) Fences; (c) Recreational facilities; (d) Outbuildings, with the exception of garages and carports; (e) Swimming pools, seawalls, break-walls, boat lifts and/or docks. (4) The inspector is not required to move furniture, appliances, lawn and garden equipment, tools, stored items, wall decorations, floor covering, clothing or any items that block the view and access to components or structures. -

61-30.810 Standards of Practice, Exterior Components.

(1) Exterior systems and components include the following: (a) Exterior wall cladding/siding, flashing and trim; (b) All exterior doors; (c) Attached decks, balconies, stoops, steps, porches, and their associated railings; (d) Eaves, soffits and fascias where accessible from the ground level; (e) Walkways, patios, and driveways leading to the dwelling entrances; (f) Garages and carports. (2) The inspector shall inspect all of the visible and readily accessible exterior systems and components. (3) The inspector is not required to inspect: (a) Window and door screening, shutters, awnings, and similar seasonal or protective accessories and devices; (b) Fences; (c) Recreational facilities; (d) Outbuildings, with the exception of garages and carports; (e) Swimming pools, seawalls, break-walls, boat lifts and/or docks. (4) The inspector is not required to move furniture, appliances, lawn and garden equipment, tools, stored items, wall decorations, floor covering, clothing or any items that block the view and access to components or structures. -

61-30.811 Standards of Practice, Site Conditions that Affect the Structure.

(1) Site conditions that affect the structure include the following: (a) Vegetation; (b) Grading; (c) Surface drainage; and (d) Retaining walls on the property when any of these are likely to adversely affect the structure. (2) The inspector shall inspect all of the visible and readily accessible site conditions that affect the structure. (3) The inspector is not required to inspect: (a) Geological, geotechnical or hydrological site conditions; (b) Erosion control and earth stabilization measures

Source: Florida Home Inspection Standards of Practice

[studentabode]

What International Students Should Know About UK Rental Laws

International students are often likely to find the first difficulty in relocating to the UK: finding housing. The UK rental market has a tremendous variety, but the best way to get to know the rental sector is to comprehend its regulations. These laws have been enacted to guarantee tenants' safety and give them the right to reside in a fair and secure environment. This is why students who come to the UK for the first time must know them.

This is a full guide to all the crucial aspects of UK rental laws that international students must know. It also provides some tips to make the process more convenient.

1. Tenancy Agreements: Your Legal Safety Net

The tenancy agreement is a legally binding document you and your landlord signed. Typically, student housing is under an Assured Shorthold Tenancy (AST), which provides all the rights to the tenant.

Key Details to Check:

Rent amount and payment schedule. The length of the tenancy.Deposit amount and terms. Additional fees for utilities or late payments.

Rent amount and payment schedule.

Length of the tenancy.

Deposit amount and terms.

Any additional fees, such as for utilities or late payments.

The first and foremost step is to read all the contract clauses thoroughly and then you should line it up in your mind if it all makes sense to you. If there is anything that is not definitive to you, get guidance to confirm that you're confident about your duties and licenses.

2. Deposit Protection Schemes

In the UK, your landlord is by law obliged to put your deposit in a government-endorsed Deposit Protection Scheme. Thus, it is guaranteed that the money you've deposited will be safely returned when your lease expires, in case you do not leave any damage or fail to pay rent.

Types of Schemes:

Direct payments into this government-run scheme (Deposit Protection Scheme, DPS)

Tenancy Deposit Scheme (TDS)

Deposit Protection Service (DPS)

My Deposits

Tenancy Deposit Scheme (TDS)

You should be sent a certificate or confirmation of deposit within 30 days of the deposit from the landlord. You can get a court order to punish the landlord who does not do so.

3. Right to Rent Checks

Residing in the UK illegally is a punishable offense. Perhaps landlords can use the best available record to prove that the person is residing legally in the UK, but, if they neglect this measure, they could be found guilty of a serious crime. As a foreign student, you are going to have to hand in the following papers:

A valid passport.

Your student visa or BRP (Biometric Residence Permit).

Proof of university enrollment is required.

These checks are done before signing the contract and ensure that landlords do not rent to people who do not have their legal papers in order.

4. Landlord Responsibilities

Landlords have several legal obligations to ensure your safety and comfort during your tenancy. You can be sure of:

To fix structural defects, leaks, or broken appliances in the property.

Safety certificates must be provided: gas safety certification, including electrical safety laser tests and a valid energy efficiency rating (EPC) among others.

Smoke and Carbon Monoxide alarms that work properly: There should be at least one smoke alarm on each of the property's floors.

However, if your landlord does not fulfill these obligations, you have the opportunity to give this landlord a bad report at all the local council or housing authorities.

5. Your Rights as a Tenant

As a student tenant, you have the specific rights that shield you from being mistreated:

Peaceful enjoyment: Your landlord must provide you with at least 24 hours' notice if they are to enter the property.

Protection from eviction: Landlords must follow the proper procedures if they want to evict tenants. Any attempt to unlawfully evict you by a landlord without giving you a notice is illegal.

Requesting repairs: You have the right to ask for the necessary repairs and to have them attended to promptly.

6. Rental Scams: Stay Alert

International students can be the most likely to be the target of rental scams. Stay on alert when dealing with strangers or suspicious listings. Her common warnings are as follows:

Requests for large amounts of money as a deposit without being able to see the apartment.

The landlord does not want to sign a tenancy agreement.

Listings with deals that confer unreasonable benefits.

Ensuring the property is valid remains at all times, and whenever possible, use specialist platforms or agencies in student housing that have good reputations.

7. Council Tax and Utilities

In most cases, students are exempt from paying council tax, but you may have to supply evidence of your student status to your local council. However, you will probably want to plan your budget for utilities like electricity, water, and internet if they are not part of the rent.

8. How to Handle Disputes

If problems are likely to come up between you and the landlord then try to deal with your differences in a friendly way. In case this solution doesn't work, you can still take the case to:

Local council housing departments.

Citizen's Advice Bureau.

The Housing Ombudsman.

Document all the communications and records of the payments and agreements you have, and keep them as proof.

9. Choosing the Right Accommodation

It is critical to know UK rental laws; however, the right choice of accommodation is also of the same importance. Prefer student-centered residences, such as purpose-built student accommodations; which are exclusively designed to cater to students' studies.

Utilities, security, and social spaces are the most commonly used rental factors, eliminating most of the common problems. Also, these accommodations are even more preferable, as they are specially geared for international students; consequently, there is a safer and more comfortable experience for them.

Final Thoughts

It might seem a little worse than hellhole to be a foreign student who is relying on UK landlords. Nonetheless, thorough mastery of one's basic rights and responsibilities is the key to moving on to a successful and comfortable life in the UK. Along the way, you would know a landlord can be sued for not protecting a deposit and also failing to meet the agreements stated in the tenancy agreement.

Meanwhile, in Student Tenant, we only use the verified accommodations that are safe, which were thoroughly checked during the student exchange with the UK. In detail format, our team understands every student's expectations and they give guidance from beginning to end, e.g. finding the proper place to stay and getting settled in with comfort. Come to us so that we can help you transition to your study in the UK smoothly and cheerfully!

While gaining knowledge of the service and selecting the trusted accommodations, your UK dream could be as pleasant as you've been imagining. Have a safe trip and a continuous happy study!

Student Tenant: Room Hunting Without the Headache!

It may also not be easy for a foreign student to get a good house for instance; but when one looks for one, it is not a hard task to do. This is where platforms like Student Tenant are useful; this is where we come in. As a one-stop solution provider that focuses on the student housing journey, Student Tenant provides a variety of accommodation options which has been vetted to meet the needs of students. These properties have to go through different tests before they are considered safe, comfortable, and well-equipped to offer opportunities for student accommodation.

It goes further than simply advertising student apartments; helping users comprehend rental agreements and guarantee deposit protections in addition to Right to Rent check assistance and other legalities. If you need student accommodation which is all-inclusive or shared accommodation for creating a group of like-minded individuals, Student Tenant helps you find a home that meets your needs, pocket, and course.

For their dedicated approach, loyalty, and passion for truth and the student they make your shift to the life in UK as comfortable as possible and enjoyable. Trust them to make your dream of having a home in the UK a reality bristling with comfort, security, and above all, the blessings of a peaceful stay; from mere student beds to fun packed student community to support your studies.

[promptbuildinginspection]

Home Inspection Services Perth – Prompt Building Inspections

Prompt Building Inspections offers thorough evaluations of residential homes through its Home Inspection Services in Perth. Thorough inspections are performed by knowledgeable experts who evaluate the roofing, structural soundness, and other factors. We want homeowners to be able to make educated decisions about repairs, upkeep, and real estate transactions by using our home inspection services to spot concerns that are already present or potential risks. Roof Tie Downs are robust and tied to the roof's framework, preventing roofs from being lifted or blown off during high winds and safeguarding the home and its people. Our dependable home inspection services in Perth ensure the security and quality of houses with thorough reports and professional advice. Visit us right away for additional details!

[usafphantom2]

The cover artwork of the novel Firefox by Craig Thomas depicted a MiG-25, and the plane was described similarly to the MiG-25 in the book.

The Soviet MiG-25 (NATO code-name “Foxbat”) was a high-speed interceptor and reconnaissance aircraft. The aircraft entered service in 1970 and has a top speed of Mach 2.83, powerful radar, and could carry up to four air-to-air missiles.

A capable interceptor, the MiG-25 was widely exported by the Soviet Union.

The MiG-25’s capabilities were not discovered until 1976 when Viktor Belenko, a Soviet MiG-25 pilot, defected to Japan.

Subsequent analysis revealed a simple-yet-functional design with vacuum-tube electronics, two massive turbojet engines, and sparing use of advanced materials such as titanium.

The Soviet government put pressure on Japan, demanding the delivery of the purloined ‘Foxbat’ pronto. Since there were no legal reasons not to, the MiG-25 was returned, in dismantled and crated condition. The Japanese did it on purpose to cover up the ‘surgery’ they and the U.S. intelligence experts had undertaken on the MiG.

However the Soviet experts were quick to find out just how much the West actually knew. When the MiG-25 was returned to the USSR it was determined that the Americans had run the engines and measured the aircraft’s infra-red signature and also made a detailed analysis of the systems and avionics, including the radar, and the structural materials. Not knowing how to operate the equipment, the Americans had damaged some of it and had to make hasty repairs (foreign fuses and resistors were discovered in the radar set).

The incident got the world press going wild with stories about the MiG-25 and U.S. Defence Secretary Schlesinger stated that the new Soviet interceptor was a sufficiently potent weapon to bring about drastic changes to the Western weapons systems and strategies.

Belenko’s defection was also mentioned in the novel Firefox by Craig Thomas, on which Clint Eastwood’s movie is based. According to an interesting post appeared on Quora, in the book there’s a mail conversation (the snail mail kind, since it was published in 1977 and takes place a short time after) in which they discuss Belenko’s defection. Someone argues that the new MiG-31 Firefox is not a big deal, since they already have Belenko’s MiG-25, while someone else argues that the MiG-31 is a completely different beast.

Clint Eastwood in Firefox

Then, as MiG-31 flies for the first time, NATO has everything in the air to spy on it, and nobody could see anything on the radar. They conclude that the MiG-31 not only is faster than anything and features a revolutionary fire control system controlled by thought, but also is invisible to radar, and that they have to steal one.

And that’s when the book begins in earnest, and also where the movie starts.

Since the defection of Victor Belenko was widely mentioned at the time, the publisher had an unusual large first print run, gambling on the publicity of Belenko’s defection to push up the sales.

In fact Craig Thomas was inspired by the awesome performance of the MiG-25, and then Belenko defected as he was finishing the book and thus included in the letters.

Fun fact: the cover artwork depicted a MiG-25, and the plane was described similarly to the MiG-25 in the book. In the sequel, Firefox Down, the description was more like the MiG-31 in the 1982 movie.

MiG-31 Firefox

Full-scale MiG 31 Firefox mockup used in the film “Firefox” parked at Van Nuys Airport, California in May 1982

Fun fact 2: The artwork on the Swedish paperback translation of Firefox instead depicted a canard and double-delta aircraft, pretty similar to the Swedish JA-37 Viggen.

JA-37 Viggen

Photo credit: Screenshot from YouTube video, CIA, Dmitriy Pichugin and MilborneOne via wikipedia

Dario Leone

Dario Leone is an aviation, defense and military writer. He is the Founder and Editor of “The Aviation Geek Club” one of the world’s most read military aviation blogs. His writing has appeared in The National Interest and other news media. He has reported from Europe and flown Super Puma and Cougar helicopters with the Swiss Air Force.

NEXT US Navy selects Commercial Dismantlement plan to dismantle and dispose USS Enterprise (CVN-65), the world's first nuclear-powered aircraft carrier » PREVIOUS « F-8 Pilot recalls how a good brief by his Flight Lead saved his bacon during a night carrier landing with his Crusader radio not working

Leave a Comment

SHARE

PUBLISHED BY

Dario Leone

TAGS:

MiG-25MiG-25 FoxbatMiG-31MiG-31 FoxhoundViktor Belenko

t

Fedotov MiG-25RB altitude world record

[masterbuilding131]

The Importance of a Thorough Building Inspection for Homeowners and Buyers

When purchasing a home, whether it’s a new construction or an older property, one of the most important steps you can take is a building inspection. This inspection is a comprehensive assessment conducted by a qualified professional to evaluate the condition of a property. It can help you uncover hidden problems that could affect the safety, structure, and value of the home.

What Is a Building Inspection?

A building inspection involves a thorough examination of a property’s key systems and structures, including the foundation, roof, plumbing, electrical wiring, and overall condition. The goal is to identify any defects or areas that may need repairs or upgrades, ensuring the property meets safety and livability standards. Inspectors use specialized tools to check for things like mold, pests, water damage, and structural weaknesses.

Why Is a Building Inspection Important?

A building inspection can save you from costly surprises down the line. Whether you are a first-time homebuyer or someone looking to invest in real estate, understanding the true condition of a property before making a commitment is essential. An inspector’s findings can also help with negotiations, as repairs or improvements may need to be addressed by the seller prior to finalizing the deal.

For current homeowners, regular inspections can help spot issues early, preventing further damage and expensive repairs. It’s also an essential step for anyone planning to renovate or remodel, as it can highlight structural changes that may require professional intervention.

What Do Inspectors Look For?

Building inspectors typically evaluate the following areas:

Structural Integrity: The foundation, framing, and roof are all assessed for damage or instability.

Plumbing and Electrical Systems: Inspectors check for outdated or faulty systems that could pose safety hazards or cause costly issues later.

Interior and Exterior: They examine walls, windows, doors, flooring, and exterior siding for signs of wear, leaks, or damage.

Safety Concerns: Inspectors identify fire hazards, carbon monoxide risks, or issues with ventilation and heating.

Conclusion

In conclusion, a building inspection is an invaluable service for anyone buying or owning property. It offers peace of mind by revealing potential problems early and ensures that the property is safe, stable, and structurally sound. Whether you are negotiating a purchase or maintaining your home, regular inspections help protect your investment for years to come.

[caseybuildingconsultants]

Trusted Pre-Purchase Building Inspections You Can Count On

Pre-purchase building inspections in Tarneit are crucial for ensuring a property is in good condition before buying, potentially saving you from unexpected costs and giving peace of mind. Casey Building Consultants, a trusted name in Melbourne, offers comprehensive building inspections, pest and termite assessments, and maintenance checks. With years of experience and in-depth knowledge of the local building environment, they provide thorough evaluations to uncover hidden defects in areas like foundations, roofing, plumbing, and electrical systems.

A building inspection not only identifies structural or cosmetic issues but also provides negotiating leverage, helping buyers secure a better price or request repairs. It protects you from future expensive repairs by revealing problems early, allowing you to budget accordingly.

Casey Building Consultants offers detailed pre-purchase inspections, pest and termite checks, and ongoing building maintenance inspections. They also provide specialized services like dilapidation reports, pre-sale inspections, and insurance appraisals. Their expert team uses advanced tools to detect hidden damage, ensuring you make informed decisions when purchasing or maintaining property.

[iadrywall]

Breathe New Life into Your Walls: Drywall Repair Services Fairfield, IA

Did water damage or general wear and tear take its toll on your Fairfield, IA, house’s drywall? They are ugly and unsightly and negatively affect the interior's attractiveness, usability, and integrity. However, professional drywall repair services will be useful to regain the looks that your walls once used to have. Let’s look at how a drywall contractor in Fairfield, IA, can help or enhance your property.

Repair Misdeed and Redecorating

Drywalls, like any other structure in a home, may require some facelift after some time because of some effects like wear and tear, accidental impacts, and water damage. A drywall contractor in Fairfield, IA, can repair these defects to ensure the return of the smooth surface on your walls. Whether it is just a nail pop, a big crack, or a large hole, such people know how they can fix it since they already have the right tools for the job.

The Accreditations are useful in guaranteeing duty and reliability

If you are not willing to spend a lot of money on drywall repair, inquire about the service of a professional since the job might be more complicated than it seems. The drywall contractor in Fairfield, IA, has adequate experience and is capable of completing repair services effectively and accurately. They have all the required equipment to do the job effectively and as fast as possible, thus causing minimal interruptions to your day. They also can guarantee that the repaired area of the drywall will be matched perfectly to the other parts of the new surface to make it seem as if there was no damage for some time.

With Different Types of Works, Expectations of Remodelling Projects

Is it time for a home improvement project in your Fairfield house? They can also take corner work, and this drywall contractor in Fairfield, IA, can help prepare the area for the transformation. They are capable of performing jobs, including tearing out the previous forms of drywalls, putting up new forms of panels, and cutting what might be necessary to create space for a door or windows. They guarantee a clean bill as you proceed with the rest of your remodeling process.

Conclusion

Professional drywall repair service can prove to be very beneficial in improving the appearance and, ultimately, the value of your home in Fairfield. A drywall contractor in Fairfield, IA, is useful in taking care of existing damages, adding to future remodels, and guaranteeing that the final product is impeccable and fits your decor well. Do not wait any longer to get in touch with a good drywall contractor to invigorate your walls out there.