#concrete formwork magnets

[mpcomagnetics]

Magnetic Recess Members

Magnetic Recess Members, Lifting Recess, & Holding Plates Dog Bone Pin Recess Members Designed for the installation of the lifting pin anchors in a steel form using a one-piece urethane recess made to fit all standard size Dog Bone pin inserts. Available with an embedded magnetic base or just the urethane casing to put on a plate. Description Size Part Number Magnetic Dog Bone Recess Member 1…

[meikomagnetics]

U60 Magnetic Formwork System For Precast Slabs and Double Wall Panel Production

U60 Magnetic Formwork System consists of U shaped metal channel profile (steel/stainless steel/aluminum options) and several buit-in automatic permanent magnetic systems. It's formed as a concrete frame to produce precast elements in various shuttering lengths, heights, especially for floor slabs, sandwich and double wall panels. The side edges could be straight with no chamfer or milled sharply with one or two sides for elements chamfering. During the procession, this magnetic siderail profile could be moved to the position by robot handling or manual operating, after marking by scribine machine or manual.  As a critical component, the switchable knob connecting with inside magnetic block performs to active or deactive the magnetic force. DETAILED SPECIFICATIONS

Model L(mm) W(mm) H(mm) Magnet Force(kg) Chamfer U60-500 500 60 70 2 x 450KG Magnets Non/1/2 Sides 10mm x 45° U60-750 750 60 70 2 x 450KG Magnets Non/1/2 Sides 10mm x 45° U60-900 900 60 70 2 x 450KG Magnets Non/1/2 Sides 10mm x 45° U60-1000 1000 60 70 2 x 450KG Magnets Non/1/2 Sides 10mm x 45° U60-1500 1500 60 70 2 x 900KG Magnets Non/1/2 Sides 10mm x 45° U60-2000 2000 60 70 2 x 900KG Magnets Non/1/2 Sides 10mm x 45° U60-2500 2500 60 70 3 x 900KG Magnets Non/1/2 Sides 10mm x 45° U60-3000 3000 60 70 3 x 900KG Magnets Non/1/2 Sides 10mm x 45° U60-3500 3500 60 70 3 x 900KG Magnets Non/1/2 Sides 10mm x 45° MAIN ADVANTAGES The U-profile could be machined in different lengths, widths, heights with or without lateral miltres Wide applications for precast ceilings, girder slabs, sandwich and double wall panels. High holding and resistant force due to the integrated powerful and proven magnet technology Activation of magnets by simple pressing with foot or robot Direct force closure between U channel profile shuttering, magnet and steel casting table Easy removal over the mirro-smooth through switchable magnet Read the full article

[magnetsw]

Souwest Magnetech Formwork Magnets

Formwork magnets is committed to equipping builders to succeed by providing the lightest, safest and most versatile framing system in its class. Souwest Magnetech offers a wide range of magnetic holder systems for the production of prefabricated concrete elements. Magnets are available with formwork profile and integrated magnets or as separate units -- shuttering magnets and magnetic chamfer, which can be attached to a separate wooden or steel formwork onto the casting table.

Formwork Magnets Characteristics

The precast concrete industry is looking for ways to manufacture parts more economically and efficiently, and Souwest Magnetech offers products that can be used with posts or clamping devices and on any formwork surface. Special geometries allow them to adapt to any size to meet the applications and needs of our customers.

With magnetic solutions we have developed fastening magnets and very special formwork. These fastening magnets are used to hold the concrete shape in place during the pouring of concrete.

[hsmagnet]

What is precast concrete?

What is precast concrete?

What is precast concrete? Precast concrete – a construction method using prefabricated reinforced concrete elements – is gaining popularity worldwide. Initially developed in the Nordic countries in the 1950s, modular precast has proven itself one of the fastest, most profitable, sustainable, and cost-effective ways to build. Precast is a method for industrialized construction Precast is a method…

[azorganics]

Aluminium Formwork – The Future of the Construction Industry

Aluminium is a silvery-white, soft, non-magnetic chemical element with the symbol Al and atomic number 13. It is a ductile metal in the boron group. By mass, aluminium is the most abundant metal in the Earth's crust. The oxides and sulfates are the most useful compounds of aluminium. The abundance of aluminium decreases relative to other elements at greater depths into Earth's mantle and beyond. The chief ore of aluminium is bauxite. Aluminium is remarkable for its low density and its ability to resist corrosion through the phenomenon of passivation.

Aluminium and its alloys are vital to the aerospace industry and important in transportation and building industries, such as building facades and window frames. Despite its prevalence in the environment, no living organism is known to use aluminium salts metabolically, but aluminium is well tolerated by plants and animals. Aluminium metal is highly reactive, so native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals.

Aluminium Formwork is the use of creating support structures and moulds to create structures out of concrete which is poured into the prepared moulds. Formwork can be made using moulds out of steel, wood, aluminium and/or any prefabricated forms. Into this mould, fresh concrete is placed only to harden the structure subsequently.

This is a construction system used for forming cast in place concrete structure of a building during construction. It is also used an alternative or for controlling and scheduling the work of other construction trades other construction trades such as aluminium shuttering, modulations, refabricating works, concrete placement, steel reinforcement, mechanical and electrical conduits.

The Use and Purpose of Aluminium Formwork is such that, the Formwork serves as a mould for concrete structural components unless such type of mould is given by other structural components or by the soil, etc. It helps in moulding the placed fresh concrete, which normally is viscous in this stage, to the shape specified or given in the drawing or as desired.

The Aluminium Formwork is specifically designed to allow the increase in the rate of construction of multiple unit projects at an optimum productivity level and also, the aluminium formwork can be used for a broad range of construction work.

Some Benefits of Aluminium Formwork System are that it does not require any plastering, you can have savings on overhead expenses due to the increased speed in construction, crack free structures, it doesn't require any kind of timber or plywood for construction activities, casting of walls and slabs is possible simultaneously in this, and also it doesn't require skilled labour.

[hybconstructionltd]

Tips To Improve Your Formwork Construction Process

Pouring concrete for load-bearing structures can be a difficult task, which mandates the use of formwork to create a strong and stable completed concrete structure. Contractors will frequently hire a formwork construction specialist to guarantee that the formwork is installed correctly, although, for smaller works, the formwork can be installed without the assistance of a professional. The most critical phase in the process is determining the appropriate type and quantity of formwork for the job.

When constructing formwork in a congested city where bystanders may be present, it is critical to consider their safety as well. Barriers should be put well outside of the formwork construction to prevent pedestrians from getting too close to the structure and perhaps injuring themselves. Formwork may fall out of position, and concrete may splatter during the pouring process, necessitating the establishment of a safety zone surrounding the structure. Column formwork construction has two main advantages: it is quick and easy to put together, and it requires less labour and equipment to make consistent, strong, vertical concrete shapes with the appropriate dimensions. Use the latest in shuttering by selecting Nova Formworks. Certain tips to improve the construction of formwork are discussed below.

Lay out the pads- In place of laser levels and planning tools, which can quickly provide straight and plumb lines to guide formwork, chalk lines are increasingly being phased away. The crew instantly used equipment to draw straight lines on each pad. A miniature laser level with a magnetic mounting device was used to level the formwork.

Replace nails with screws- There are benefits to attaching forms with screws. They don't rattle or loosen the forms when you screw them in, and adjustments are straightforward to make subsequently. Screws can also be used again. Utilising them is best done with an impact driver rather than a drill driver. Contractors may never want to use a drill/driver again, even if they aren't aware of them. The process of driving a 3-inch screw into the wood with an impact driver requires relatively little effort, never peels the screw head, and cannot be halted. The shaping crew used little 12-V Li-ion impact drivers that easily fit in their pockets.

Should be strong- A professional groundworks company will ensure the strength of your formwork. It needs to be precisely tailored to the necessary dimensions and shapes to fit in the intended location. The material of the formwork will be chosen based on the desired concrete surface. Formwork must be sturdy enough to take the weight of both working loads and fresh concrete, and it must remain in place during the concrete laying process without warping or deflecting. Formwork must withstand the intended vertical and horizontal loads. Throughout the construction phase, it should also be able to withstand additional unexpected loads. During removal, the formwork shouldn't cause any damage to the building or the concrete's surface. To reduce gaps between formwork pieces and avoid cement material leakage, the formwork pieces should be closely fitted.

Securing asphalt- A traditional finishing method involves drilling 5/32- or 3/16-inch holes in concrete or asphalt, inserting a piece of tie wire, and hammering a 16-cent double-headed nail into the holes. A crowbar is then required to remove it after that. We replaced a lengthy extension connection connected to a generator with a 36-V lithium-ion (Li-ion) battery-operated hammer drill, and the device performed well.

Safety comes first- Groundwork contractors develop after considering all the safety measures, dead loads, concrete temperature settings, the working load to be sustained, and safety considerations for the formwork materials. Before usage, the timber formwork must be carefully inspected, and any members with cracks or too many knots should be eliminated. While filled with concrete, the timber centring typically sinks, thus when designing, this element must be taken into account. If the load is released or the supports are accidentally struck, the vertical supports must be suitably braced or fastened in place to prevent failure.

It's usually advantageous to find someone qualified to handle all of them with the best possible use of resources and money for a strong formwork process and better innovations. Contractors for groundwork are obligated to evaluate the site for this reason. If you are considering your options but are still unclear about what to do, get in touch with HYB Construction. We provide trustworthy and knowledgeable groundwork services. by creating the strategies and plans required to launch your project successfully.

[awesotechmagnetics]

#Shutteringmagnet #MagneticShutteringProfile 

This Shuttering Magnetic Formwork System, consist of a frame profile and integrated magnetic block system, is available in all sized formwork for moulding or demoulding, like double walls and lattice girder ceilings.

#Precast #Concrete #PrecastConcreteMagnet

[horizonmagnet-blog]

900Kg Shuttering Magnet

900Kg Shuttering Magnet

Shuttering Magnet

precast concrete formworks Shuttering Magnet

Easy to operate Shuttering Magnet

900Kg shuttering magnet is magnetic shuttering solutions for precast concrete formworks!

In fact, construction market is too small compared to all Neodymium magnet markets, and Neodymium magnet is also too small to extensive construction accessories. Almost none of magnet suppliers have interest or knowledge in the application of magnet in the construction market. We focus our assembly attention on developing and manufacturing Neodymium magnet assemblies for the construction industry, especially precast concrete industry.

The precast concrete industry has been searching for a more economical and efficient formwork method. In the past, some conventional magnets were used to position and fasten the formwork, but considerable mechanical loads with a hammer were required, which was easy to damage the magnets and the surface of the expensive formwork tables as well. Thanks to Horizon's knowledge and experienced experts in magnet and construction fields, in order to facilitate the formwork activities, Horizon are developing and manufacturing our own shuttering magnet to solve this problem successfully.

Our shuttering magnet provides quick operation leading to improved efficiency when setting out and breaking down the formwork. It consists of a switchable NdFeB magnet unit and a steel casing which forms a certain designed magnetic circuit. By pressing the button on top of the steel casing, this magnetic force is activated so that this magnet can fasten the formwork to the steel table tightly. In a deactivated mode, the magnet is easy to position. By means of two threaded holes integrated on the top, this magnet can be equipped with various adapters, which can provide unlimited options for use.

exact positioning Shuttering Magnet

Characteristics:

Use with wood or steel formworks

Easy to operate

Simple and exact positioning

Adhesive force ranging from 450 Kg to 3100 Kg

Avoid welding or bolting to the formwork table therefore preserving surface finish

Same magnet can be used for different purposes

Integrated threaded holes to adapt formwork

Adapters to be custom made

More information please view here.

[akamaotto]

RATEC, LLC appoints exclusive sales representative in the United States and Canada - Construction Review Online

RATEC, LLC appoints exclusive sales representative in the United States and Canada – Construction Review Online

This article was originally posted in Construction Review Online [ad_1]

Starting from 1st August 2018 RATEC, LLC has appointed IWI Group, LLC as its sole and exclusive sales representative in the United States and Canada. RATEC is one of the leading suppliers of magnetic formwork technology and mold solutions for the precast concrete industry worldwide.

RATEC LLC has started its business in…

[mpcomagnetics]

Magnetic Coil Loop & Locator Magnets

Magnetic Coil Loop & Locator Magnets Magnetic Coil Thread & Ferrule Locators Magnetic Coil Thread Protectors & Magnetic Ferrule Locators are made with a threaded steel stud. The base contains a strong neodymium magnet encased in a urethane shell. The base has a square recess machined into it to accommodate a 1/2″ ratchet driver for easy removal from concrete. Custom threading & stud lengths are…

[mpcomagnetics]

Loaf Magnets

Loaf Magnets Loaf Magnets are suitable for various applications including but not limited to steel rails & securing wooden forms in place. Available in 3 standard sizes with custom sizes able to be manufactured upon request. Please contact a MPCO Inc representative with technical questions & for a quote. Description Tension Capacity Length Bottom Width Top Width Height Part Number 3” Loaf…

[mpcomagnetics]

Button Magnets

Button Magnets Button Magnets are designed for supporting side rails & block outs. The magnet is engaged to steel by impacting the button with the Dead Blow Mallet (or rubber mallet) & is disengaged using the Lifting Handle on the button. Button Magnets are available in 1/2 ton, 1 ton, 2 tons, & 2-1/2 tons holding force with the 1 ton strength having a low profile housing available. Please…

[mpcomagnetics]

Magnetic Chamfer

Magnetic Chamfer Rigid steel chamfer with magnets embedded designed to create beveled edges on concrete. Magnetic steel chamfers are reusable & have magnets strong enough to securely hold the chamfer in place while still allowing for easy removal. Magnets in the steel chamfer can be embedded to make a reveal. Please contact a Fister Inc representative with technical questions & for a…

[meikomagnetics]

Precast Aluminum Plywood Sideforms Fixing Magnets with Adaptor

Due to the  heavy dead weight of steel framework, it's cumbersom for manual operation and the robot handling equipments lead to too much investment. Therefor, more and more precast plants choose aluminum profile or plywood siderails to form the concrete, especially in those areas, which are filled with competitive cost of wooden material, like Australia, Canada and else. In order to fit customer's sideforms well, we used a special adaptor to support and fix the formwork from sliding and moving on basis of switchable shuttering magnets as a key functional part. The adapting plates could be easliy attached to the box magnets with two small bolts. After aluminum profile placed, the magnet could be directly hanged onto it and push the button for magnet activing. When demoulding, use the lever bar to deactive the magnet and remove it for further maintenance and storage. In some sites, when precaster only using plywood material without supporting aluminum profile, this magnet with adaptor could be workable as well. Just need to nail the additional small plate onto the plywood parallelly and then attach the magnet with hanging the particular groove on it. Meiko Magnetics is a China-based precast concrete magnets manufacturer, mainly produce all retaining forces shutter magnets ranging from 450KG to 3000KG, adapters, precast emerged accessories holding magnets, magnetic and non-magnetic steel chamfers as well as magnetic shuttering siderails for manual or robot operating. Thanks to our experienced and skilled technical teams, at present, we are equiped with numerous types of magnetic fixing systems and constantly innovate to process better magnetic solutions for our precasting customers. ADAPTOR SPECIFICATION TYPE L(mm) W(mm) T(mm) Fitting Magnet Forces(kg) Adaptor 185 120 20 500KG to 2100KG Read the full article

[meikomagnetics]

Loaf Magnet with Adapting Accessories for Modular Wooden Shuttering System

Loaf Magnet with adaptor accessory is applied for the production of precast modular components, with plywood or wooden shuttering forms. It's designed with no button, compared to standard switchable push/pull button magnet. It's quite slim and make less occupation of the steel table. It simplies the formwork mould installation and just need to locate the shuttering magnet into the exact position by hands. Normally if there is a slight wrong position, you can use a rubber hammer to fix it.  The further step is to install the adaptor accessory and adjust the tensile bar to fit your wooden mould height and make it support tightly. The bottom magnetic system could afford powerful resistance force against the forms moving under the circumstance of pouring concrete and steel platform vibrating, due to the integrated neodymium magnets.  After works done, a special release bar is provided to release it and remove it for further maintain or next use. The stainless case feature soutstanding performance for anti-rust, which greatly increase the magnets using life. MAGNET DIMENSION Type L(mm) W(top) W(bottom) H(mm) N.W.(KG) Force(KG) LF-350 125 54 45 35 1.2 350 LF-900 250 54 45 35 2.3 900

In the processing of this magnet house, we make 100% size inspection with GO/NO GO gauge to make sure it fits your current adaptor. After magnet assembling and grinding, the inspection will be done again before shipment.

Read the full article

[meikomagnetics]

Shuttering Magnets with Single Rod for Locating Formwork Side Rails

Shuttering Magnets With Hanging Rod is an evoluted type magnetic system on basis of standard switchable push/pull shuttering magnet. The solid welding rod is specially produced to fix customers' formwork side rail in the precast processing. Manually hang the rod onto the groove of form rails and push down the button to active the magnet. Owing to the integrated neodymium magnet systems, it could perform over 2100kg magnetic force, which firmly hold on the steel platform from sliding under concrete pouring and vibrating. The shorter length of magnet body could extremely reduce the occupation of your table and increase the module efficiency.  It features light weight for easier operating than standard formwork button magnets.

After couple of years magnetic systems producing for precast concrete moular construction, Meiko Magnetics has grown up to be a specialized and qualified precast concrete magnets manufacturer in China. We have been committed to supply one-stop magnetic fixture solutions for precast concrete factories and precast mold equipments manufacturers of the world. Read the full article