#castor has it hard fr

[murasaki-cha]

Chaos: Can I say Eva you look absolutely deliciously ravishing tonight-

Jacks: *major ptsd flashbacks and starts hyperventilating"

Eva: Oh my god Jacks bREATHE-

Lala: MUST YOU OPEN YOUR MOUTH! HE'S HAVING A PANIC ATTACK!

Chaos: I DON'T EVEN KNOW WHAT I DID!?!?

[perenlop]

everyone loves to say “get that man pregnant” til you actually get that man pregnant…..

[somewhereincairparavel]

🪸 𓇼 ⋆｡˚ 𓆝⋆｡˚ 𓇼 Percy Jackson headcanons starring Elora! (An island and summer girl at heart!) 🪸 𓇼 ⋆｡˚ 𓆝⋆｡˚ 𓇼

Thank you @sequinsnstars for reigniting my interest in this series. It's time I did a remake!

I know everyone is just thinking "why did you have yourself be a camper in camp Jupiter if you hate camp Jupiter so much?" Well. I exist in camp Jupiter because I want to spite everyone who gave Jason a hard time there 😤

Anyways, I had no claiming in Camp Jupiter, the moment I stepped foot onto the campus with the 7, a huge shiny blue trident appeared over my head, the storm clouds were huddling together to form a storm, and all that typical dramatic Poseidon shenanigans. I think that kinda cemented that I was officially a part of camp half blood now??The claiming actually made me feel good? Because Poseidon chose to be extra dramatic and made sure to do it when basically everyone at camp was inside the huge campus, so basically everyone stopped what they were doing to like, stare in curiosity.

Because in Camp Jupiter, I never received any positive kind of attention yk? Neptune was considered bad luck, so I was basically receiving the child of hades treatment, but the Roman version.

As a legacy of Athena and Hermes (thank you to my moots for helping me figure this out!) I naturally get along with them very well.

@gentlehue would SO teach me how to grow plants, and I'll help her water them 😤💅 Cynthia I'd definitely give you potted flowers every time I run into you 🩷

I swear the Aphrodite children are SO superficially judged by people in camp sometimes :/ I'd defend my pretty babies from harassment and gossip any day fr (@sequinsnstars @auroraofthesun)

Also dear Aphrodite children, I love makeup and would spend hours in your cabin with you drowning in lip gloss. Y'all would be the best teachers for my make-up lessons.

Percy and I have beds facing diagonal to each other, while Tyson sleeps in the bottom bunk. We have fun game nights all the time omgg.

I have pictures of my happy times in Rome stick on my board (‘happy times’ translate to pictures w my bb boy Jason Grace since we were kids and he has them stuck too awh 🥹)

Since I'm an Athena legacy, I always tease Annabeth and Percy that “I'm related to BOTH of them” and also, they make me pick sides when they're annoying e/o by saying “cmon family sticks together!”

I would be great buddies with Castor and Pollux (let's pretend they're both happy and alive) and would always reassure them that Dionysus kids don't deserve to be called “lazy and useless” bc THEY DON'T.

Speaking of which, Dionysus rolled his eyes at my dramatic claiming muttering “another useless sea urchin that provides nothing but high attitude to our camp” 😭 bro didn't even Hesitate

I feel like I wouldn't get along with Ares children that much. Neptune children are known for their high temper (with Neptune representing the ‘violent and turbulent’ side of the ocean, unlike Poseidon who represents the positive sides of it) and it would totally clash with Ares kids tbh. Frank Zhang, however, is the biggest exception!

I have these moments where Annabeth is just so used to calling Percy “seaweed brain” and teasing him about being oblivious that she forgets that I'm an Athena legacy aswell and just assumes I'm not that smart. (Not implying that she thinks Percy's dumb, but her teasing kinda gets to her head sometimes) and i have to snap back with some quick smart response to remind her that lol

am considerably close to Nico, because I already knew him at camp Jupiter, and we kinda had a small heart to heart about how terribly we were both treated because of our parentage. Of course, that closeness continued in camp half blood as well.

I'm the closest to Kayla and Will in the apollo cabin because they almost always are the ones who treat my injuries (and @auroraofthesun too because you're an Apollo legacy!)

I have a Pegasus that I took with me from Camp Jupiter, his name is ‘Alga’ (meaning, ‘seaweed’ in Latin) he's steel blue with a grayish tint. I didn't get a Pegasus of my own like Reyna did, but more rather, I came across one who followed me around, and i adopted it without telling anyone but Jason about it while I was at camp. He thought it was sweet and didn't snitch on me or even tell Reyna <3

And Yes, Alga and blackjack are buds. And yes they do roast us, and yes we do understand them.Also, just like how Demeter kids hate when flowers are being plucked from their roots, and how Percy hates aquariums because they confine sea creatures, I hate it when people take too many seashells from the beach. (irl I actually love seashells and used to collect them, but I've heard taking too many spoils the ecosystem in a way, and realistically if I am in the pjoverse, that would naturally make me dislike it)

But I do love making sand castles and attachingseashells on them, because I'm not taking them with me right? It's just gonna stay there. I can have fun in an eco friendly way lolzAnd I prefer keeping fake seashells made of ceramic and stuff as decor to maintain my aesthetic

Me and Percy can communicate underwater, but to other people, it would sound like we are speaking gibberish. He was ECSTATIC when he discovered this new made-up sea language ability lmao

Also, we are both in-charge of cleaning the ocean if it gets too dirty, so we have “chores days” where we dive in, and clean every ounce of harmful algae. And tending to sick sea animals.My nickname is ‘Kelp head’ because I have extremely wavy hair that's shaped like kelp. I've had that nickname ever since my time at camp Jupiter!I'm extremely competitive at capture the flag! Because of that Roman wild war blood in me, I just can't help but take it kinda seriously. I feel like Percy's way more chill when it comes to this lol

[juniperpublishersajop]

Polyurethane: Recent Engineering Contributions

Abstract

Polyurethane is one of the most versatile polymers which stands out with a wide range of tunable properties such as chemical stability, flexibility, abrasion and scratch resistance, toughness and biodegradability. It is a unique polymer containing alternating soft and hard segments. This review covers the most recent (2018-2019) engineering research contributions done for the synthesis, properties and applications of the polyurethane foams, coatings, adhesives, sealants, elastomers, composites and insists on the important aspects and realizations related to the polyurethane flammability and acoustic.

Keywords: Polyurethane Synthesis; Applications; Properties; Flammability; Acoustics

Abbreviations: AC: Alternative Current; BPAF: 4,4’ [2,2,2,-trifluoro-1-(trifluoromethyl)ethylidene] bisphenol; CNT: Carbon Nano tube; DAP: Dimer fatty acid band polyol; DC: Direct current; DMA: Dynamic mechanic analysis; DSC: Dynamic scanning calorimetry; DTP: N,N’,N’’-tri(dietoxy) phosphoramide; EG: Expanded graphite; EMD: Non-Reactive Phosphonate; EPUUS: Ureaurethane elastomer; FGO: Functionalized graphene oxide; FHPO-PO: Phosphorous Containing Polyether Polyol; FR: Fire Retardant; FTIR: Fourier Transform Infrared Spectroscopy; FTPU: Fluorinated Thermoplastic Polyurethane; G: Graphene; GO: Graphene oxide; HFBA 2,2,3,3,4,: heptafluoro-butiric acid 2,2-bis-hydroxymethyl-butyl ester; HRR: Heat release rate; HPU: Hyper Branched Polyurethane; LMPET: Low Melting Polyester; LOI: Limited Oxygen Index; MW: Molecular Weight; PEG: Poly(ethylene glycol); PHRR: Peak Heat Release Rate; PPG: Poly (propylene glycol); POSS Polyhedral Oligomeric Silsequioxanes; PU: Polyurethane; PU FR: Polyurethane with FR; RO: Rape seed oil; SEM: Scanning Electron Microscopy; SPB: Soybean Oil Based Polyol; TEM: Transmission Electron microscopy; TGA: Thermo gravimetry analysis; THRR: Total heat release rate; THR: Total heat release; TPIA: Acylhydrazine; TPID: Disulfide bonds; TPU: Thermoplastic polyurethane; VOCs: Volatile organic compounds

Introduction

Polyurethanes (PUs) constitute one of the most versatile class of macromolecular compounds known nowadays. They can contain a diversity of functional groups such as ether, ester, amide, urea, biuret, alophanate, uretidione, carbodiimide, isocyanurate, along with the urethane one (-NH-CO-O-) which open possibilities to react with many other components. PUs are synthesized by polycondensation reaction in which the macromolecular chain increases as the reaction progresses. This reaction can produce linear, slightly branched, or hyper branched macromolecules like in thermoplastics or they may have a crosslinked network leading to thermosetings. A recent kinetics study highlights the difficulties in quantifying the synthesis of linear PUs [1]. The main chemicals used for PU synthesis are polyols, isocyanates, and chain extenders having hydroxyl or amine group. PU contains in its macromolecules soft and hard segments; the former are made by the reaction between isocyanate and polyol, and the latter by the reaction between isocyanate and chain extender, both these components having 2 or 3 functional groups. In the PU macromolecule the polyol provides the elasticity, and the isocyanate provides the mechanical strength. Recently it has been reported new types of PUs made by the polyaddtion participation of diisocyanates. To perform the polyaddition with diols in order to obtain PU, mostly methylene diphenyl diisocyanate and hexamethylene diisocyanate were chosen [2]. A method for solving a system of bulk polyaddition of 2,4-toluene diisocyanate with 1,4-butanediol process balance equations, allowing the determination of the kinetic parameters is presented. The approach provides an opportunity to associate kinetic parameters with the average molar mass of the mixture and thus with the viscosity [3].

Beside PU as a simple polymer, it is also used in various types of composites together with other compounds. These can be molecular composites, fiber composites, and nano filled composites. Like in the case of other groups of composites the interaction matrix-filler plays an important role, for instance for PU nano composites the interface PU-nanofiller in cases of special silica, polyhedral oligomeric silsequioxanes (POSS), carbon nano tube (CNT), graphene (G), graphene oxide (GO), metallic nano particles are also very important [4]. PUs are processed to obtain various products such as flexible and rigid foams for construction and furniture items, sport equipments, coatings, adhesives, sealants, elastomers, fibers, medicine products. Adding other components beside polyols and isocyanates during the PU synthesis contributes to the improvement of some PU properties. For instance, tridecanoic acid added to toluene diisocyanate based PU is able to extend its working time with minimal changes to physical and chemical properties [5]. Another example is that of recycled polyol and benzimidazole grafted onto PU to enhance the surface hydrophilicity [6]. Due to the effects of PUs on human health, the replacement of toxic isocyanates with biocomponents is one of the main recent research direction related to PU synthesis [7]. The raw components necessary for the synthesis of PU can be obtained from natural products to substitute petroleum as their basic resource. Compared to isocyanates, the biobased raw materials possess many advantages like biodegradability, sustainability, nontoxicity and environmentally benign attributes [8]. Polyester polyols from renewable resources have gained important interest in the PU domain. Without petroleum-based polyols, castor oil polyols have been used as soft segments in PU [9]. Biobased PUs was also obtained from fatty acids with double functionality synthesized through cross-metathesis of oleic acid and oleic alcohol [10]. With azelate polyols produced from n-alkanediols with even number of CH₂ repeating units thermoplastic PUs (TPU)s result with increased hardness, tensile and tear strength [11].

From crystalline azelate polyol and amorphous azelate polyol two sets of segmented TPUs were prepared. Their study showed that the crystalline azelate polyols are suitable for dynamic applications and the amorphous ones are suggested for coatings and adhesives [12]. The product of 1-butene methatesis of canola triacylglicerol with shortened structure, terminal double bonds and oligomers was used to synthesize novel polyols and PU foams. The study highlights that one can improve and control jointly the mechanical properties and deformation recovery ability of biobased PU foams by combining primary functional group oligomers, and high molar volume molecules in the polyols [13]. Dimer fatty acid-based polyol (DAP) was used to substitute petrochemical DAP and has been used to produce rigid PU foam. The research data indicated that bio-polyol DAP can substitute partial petrochemical polyol to produce rigid PU foams with good comprehensive performance [14]. A series of PUs nonisocyanate were produced from the transurethanization between 2,5-bis(hydroxymethyl)furan and dicarbamates obtained from metoxycarbonylation of diamines with dimethyl carbonate [15]. Other example of studies using bio-components will be presented. This paper will review the most recent studies done on PU products like foams coatings, adhesives, sealants, elastomers, and composites, and on flammability and acoustic properties.

Research Contributions

Foams

During the production of PU foam using aminophosphonated polyols the thermal resistance was confirmed and a lower peak of heat release rate (PHRR) and lower smoke production was found [16]. A polyol obtained by glycolysis of waste rigid PU foams was used to produce a new rigid foam. This new foam showed higher compressive strength, thermal insulation, and self-extinguishing property compared with conventional foam [17]. Liquefied rice husk with different NCO/OH ratios was used to produce PU foams [18]. The effect of crosslinking agent on the properties and morphology of semi-rigid waterborn PU (WPU) foam was studied. The crosslinking density of the foams was adjusted by varying the amount of triethanolamine. The most characteristics processes to produce the foam are related to foaming and gelation. Increasing the amount of triethanolamine the crosslinking density increased and the swelling ratio decreased from 294.9 to 194.7%, Tg increased from -14.2 to-8.6 ⁰C [19]. To optimize the formulation of a PU foam for better sound absorption, a study was carried out with a response surface methodology to investigate the effects of different variables, catalysts and polyethylene fiber. For correlating experimental data, a mathematical model was developed, and model parameters were optimized by adoptive simulated annealing algoritm [20]. The optimization of rigid WPU foams obtained from a polyol functionalized with GO has been the object of a recent study. A series of rigid WPU foams were synthesized by varying either the isocyanate index, catalyst amounts, the surfactant contents or a combination of these three components. The obtained results show how controlling WPU formulations allows to improve important properties like mechanical and thermal of rigid WPU foams containing GO [21].

The effects of shear thickening fluid content and SiO₂ size on the cell structure, mechanical performance, acoustic absorption, and thermal performance of shear thickening fluid/PU foam were explored [22]. Adding to a flexible PU foam a negative powder modified with a silane coupling agent led to the improvement of important properties such as thermal stability, tensile strength and resilience [23]. Diferential scanning calorimetry (DSC), thermo gravimetry analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) were used to measure the thermokinetics and degradation of soybean oil-based PU foam. The thermodynamic properties and thermal stability during the degradation were also studied. The degradation included 3 or 4 step-degradation profiles. As the soybean oil content or NCO/OH molar ratio increases, the thermal stability of the foam, the activation energy, and reaction rate increased [24]. A technique for the production of new cheaper components able to substitute polyols for the production of PU-polyisocyanurate foams is presented. The influence of the components on the foam flammability, thermal properties and other characteristics was examined [25].

Coatings

New biobased PU coatings with lignin were studied. A diisocyanate obtained from lignin-derived vanilic acid and crosslinked with three different nonchemically modified technical lignins namely mild acetone organosolv, kraft, and soda. The results of the research showed that the reaction of a ligninderived biobased diisocyanate represent an interesting way for the production of TPU coating. The study also showed that the reaction of lignin-derived biobased diisocyanate represents an interesting way for the production of TPU coatings with a high biomass content that can find applications as an alternative to petroleum products [26]. By using stoichiometric proportions of PU polyamines and aliphatic epoxies as crosslinker, coatings were produced. These new products possess flexibility at low temperatures and resistance to chemicals, but their thermostability is low [27].

Fully biobased polyester polyols were prepared and used for PU coatings by reacting with diisocyanate. The mechanical, chemical and thermal properties demonstrated that the renewable sources used for the production of PU coatings can be good substitutes for petroleum products [28]. The structural and morphological characteristics of functionalized graphene oxide (FGO)/PU coatings were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Beside a chemical reaction between the two components they are able to effectively enhance the thermal, flame retardant and mechanical properties of the coatings [29]. Siloxane-semifluorinated PU coatings were synthesized for robust underwater applications [30].

The state-of-the-art of isocyanates and polyisocyanates of the various PU crosslinking mechanisms and the corresponding applications are presented. Aspects ranging from the replacement of oil-based PU components by biobased equivalents to the development of new synthetic pathways for the production of polyhydroxy polyurethanes for coatings have been also investigated [31]. A study of a PU network of polyaniline, polym- amino phenol and poly-α-anisidine coated on a mild steel panel was reported. The coated films showed excellent corrosion protection in the following order: PU-polyanilin>PU-poly-maminophenol> PU-poly-α-anisidine [32].

As an alternative to PU coatings based on toxic components, the synthesis of poly (hydroxy urethanes) by cyclocarbonate aminolysis constitutes a solution to avoid emissions of volatile organic compounds (VOC)s. Thus, developing their technology became important [33]. Using polyblends of WPU and polyacrylate porous-coated fabrics for synthetic leather were produced. The H bonds between the polymers were proved by FTIR and DSC. The best performance of coated fabrics was found at the ratios from 15/85 to 30/70 polyacrylate /PU [34]. Novel PU coatings were produced by polycondensation of hydroxylationterminated poly (L-lactide) (PLLA) functionalized graphene (G-g-PLLA) and isocyanate terminated PU oligomer with dimethylsiloxane. The functionalized PU was able to hydrolyze in seawater and the hydrolysis rate decreased with the increase of polydimethylsiloxane amount. The new coatings exhibited good antifouling [35].

Polymers containig spirooxazine were grafted and doped with WPU used as an environmentally friendly coating. The obtained films had improved water resistance, mechanical and photochromic properties [36]. TPU was blended in tetrahydrofuran with polyphosphate containing furfuryl and trifluorothoxy groups. Using FTIR, DSC, scanning electron microscopy (SEM) and limited oxygen index (LOI) the obtaining films were analyzed. The results demonstrated that the addition of 20% phosphazene in the blend enhanced the tensile strength by about 110% and decreased the elongation at break by nearly 13% [37].

PU synthesis and film forming using the asymmetric cyclic aliphatic diisocyanate -isophorone diisocyanate with acetylated and pristine partially hydrolyzed amylopectine/white dextrin as a crosslinker has been studied [38]. From isophorone diisocyanate, poly (ethylene glycol), aminopropyl terminated poly (dimethyl siloxane) and 1,4-butandiol via two-step polycondensation, new PU membranes were produced [39]. To obtain a pH responsive hybrid films different amounts of 2-(diethylamino) ethyl methacrylate and PU based on isophorone diisocyanate were used for heavy metal ions removal. The study revealed that functional groups of 2-(diethylamino) ethyl methacrylate are the main sorption sites for the metal ions [40].

Adhesives

A PU powder used as adhesive was synthesized by solution polymerization. The influence of molar ratio of –NCO to –OH, neutralization and types of solution dispersion on the properties of the adhesive were studied. Excellent adhesive properties were found, and that the adhesive thermostability could meet the requirements of industrial gluing for packaging, lining and footwear [41]. A research concluded that WPU could enhance its adhesive characteristics with materials of different natures and structures [42]. A review compares the properties and the use of petrol-based PU with biobased PU for adhesive technology. To reduce the VOCs, PU based on castor oil was preferred as bio raw material [43]. A study insists on the role of accurate selection of diisocyanate -which induces the hard segments- on the viscoelastic and the adhesion properties of PUs. The polyblend studied consists of a mixture of a macrodiol of hydroxyl terminated polybutadiene, polypropylene glycol (PPG) and isophorone diisocyanate necessary to develop the urethane linkages. The controlled quantities of hard and soft segments resulted in better adhesive properties and the balance is realized by the selection of the isophorone diisocyanate [44].

By incorporating synthetic glycerol mono -methacrylate, underwater PU adhesives were produced. The study confirmed that this incorporation induced increasing cohesion and adhesive strength superior to that of pure PU [45]. A new PU sealant for insulating glass based on a nucleophilic substitution reaction between the p-chlorophenol-terminated PU prepolymer and a poly-functional hyper branched polyamine has been synthesized. After crosslinking-curing it was found that the sealant is applicable in a wide temperature range, is not sensitive to moisture, is easy to store, and does not corrode the substrate; all of these as well as its mildew resistance and low cost [46].

PU Elastomers

Poly (ethylene glycol) (PEG) grafted GO was blended with PU elastomer. Their interaction was produced by H bonding. Due to it the strength and toughness of vulcanizate rubber were significantly improved and the blend Tg shifted to higher temperature [47]. Two PU elastomers, one having acylhydrazine (TPIA) and the other disulfide bonds (TPID) were synthesized, and their self-repairable ability and reprocess ability have been investigated. The conclusion of the study was that TPIA elastomer can be repaired under acidic conditions, and the TPID can autorepair under visible light at room temperature [48]. In the case of a polyblend of epoxidized natural rubber/TPU it was found that rice husk ash particles had stronger interactions with epoxidized natural rubber and provided enhanced mechanical properties to the rubber [49]. TPU elastomers having aliphatic polycarbonate soft segments and hard segments made by 1,1’-methanediylbis(4- isocyanato-cyclohexane) or 1,6-diisocyanatohexane and a combination of two chain extenders were synthesized in one-step catalyzed polyaddition [50].

To evaluate the effect of rape seed-oil-based (RO) polyol on the properties of tested urea urethane elastomers (EPUUS) was the objective of a new study. FTIR, thermo gravimetry analysis (TGA), DSC, DMA, static tensile strength and physico-mechanical tests were applied. The use of RO polyol in polyol premixes changed the chemical structure of EPUUS showing a modification in the amount of H-bonds and the degree of phase separation. An increase in Tg of the soft phase was also established [51].

Composites

Thin laminated composite has been produced by blending TPU with low-melting polyester (LMPET) and Kevlar fibers. The presence of Kevlar enhances the tensile properties and flame resistance. The tensile strength of the composite reaches 18.85 MPa and the combustion rate is reduced [52]. The effects of temperature, humidity and automotive fluids on the long-term durability of the two types of glass fiber reinforced PU has been investigated. Variation of mass, flexural strength and viscoelastic response are determined in order to find the changes of the composite [53]. A comparison of TPU/GO and TPU/reduce GO showed that the reduction of GO is not always necessary [54]. The dynamo- mechanical, thermal and mechanical characteristics of long glass fiber reinforced TPU / poly (butylene terephthalate) polyblend have been studied. A good compatibility was found between the two polymers. DMA showed that the TPU content had some influence on dynamic- mechanical properties and the Tg of the long glass fiber reinforced polyblend . DSC indicated that with the increase of TPU amount the crystallization temperature, the melting point and the percent of crystallinity decreased. The TPU presence contributes to a remarkable increase of some mechanical characteristics but also produces a decrease of flexural and modulus of elasticity [55].

Using melt-blending a hybrid made of a shape memory TPU with GO and montmorillonite (MMT) was produced. Thermal analysis showed that GO-MMT enhanced the thermal decomposition of TPU composites [56]. Expandable graphite (EG) is often added to PUs to prevent their flammability. Such graphite was incapsulated in melamine cyanurate and after that was added to rigid PU. It was established that the mechanical properties of the polymer were improved. This composite decomposes faster and produces more smoke than the PU without EG. The obtained data show that melamine cyanurate and EG have a synergistic enhancing effect on the flame retardancy of the composite [57]. A composite made of PU reinforced with sugar palm fiber and glass fiber is recommended to be used in applications that require resistance to high temperature [58]. Carbon fiber-GO reinforcement improved thermo-mechanical and thermal stability of PU due to the carbon fiber- PU improved interfacial interaction as well as the local stiffening of fiber-matrix interphase by the dispersed GO sheets [59].

A PU and red mud composite, the mud in micron particles uniformly embedded in PU, exhibited satisfactory mechanical performance and the compressive and flexural strength are, after complete curing, up to 38.6 and 12.4 MPa. It also displayed very good thermal stability, flame retardancy, storage stability, and reinforcement [60]. The heat conducting with focus on the enhancement of thermal conductivity of WPU composites through compatibility and feasibility of hybrid techniques is reviewed [61]. In a research PU foam was filled with paper waste sludge (5% by foam mass). It was found that the thermal conductivity, water vapor resistance, density, compressive strength, and modulus of elasticity were improved [62].

By using the ring-opening reaction of cyclic carbonate with excess amine and methanol to increase the molar mass of -NHɂ terminated non-isocyanate PU prepolymer, its performance was improved. By adding bisphenol A diglycidyl ether into the prepolymer a hybrid was obtained which has good mechanical properties, a Tg-49,1 ºC and a good thermal stability [63]. Applying a low melting point chain extender, the raw components being 1,4-butanediol and dimethyl propionic acid a study showed that with the decrease of the ratio of dimethyl propionic acid/1,4- butanediol the mechanical properties of the PU decreased [64]. To control the soft segment thermal properties and to enhance tensile strength, shape memory and low temperature flexibility, norbornen was grafted onto PU. This grafted PU demonstrated enhanced low temperature flexibility due to reduce restrictions of rotational and translation mobility [65].

A new molecular design was proposed by incorporating 2-ureido-4-[1H]-pyrimidone motifs in the backbone chains of PU to enhance the mechanical performance and using a triol functional Diels-Alder crosslinker to realize PU healable and recyclable [66]. New PUs made with homocubane (C’ı₀Hı₀O₂)- based diols and diisocyanates were synthesized. They are soluble in polar organic solvents, decompose at relatively high temperature, and the Tg is higher than those of commercial PUs. It is expected that these new polymers will find application in products that need thermally robust PUs [67]. One pot technique for the production of GO/(hyper branched PU)(HPU) has been presented. The composite obtained shows very good increase in the mechanical properties due to the covalent bonding realized between GO and isocyanate component and an excellent load transfer. Mild increase in stability towards thermal degradation and higher dielectric constant compare with HPU at low frequency was also found [68].

The effects of polyhydric alcohols on the mechanical and thermal properties, porosity and air permeability of PU composites have been studied. With increasing polyhydric alcohol amount, the tesile strength and Tg decrease remarkably. The swelling capacity and porosities of the PU/propylene glycol (PPG)-blended and PU/glycerol blended films increased with the increase of PPG or glycerol amount [69]. In composites TPU/wood flour the properties depend on the ratio between the components; it was established that the presence of the wood flower contributes to the increase of important properties such as density, hardness, water absorption, tensile modulus; impact and and abrasion resistance decrease [70]. The high electrical resistivity of blast furnace slag and fly ash make these materials an asset for use in rigid PU foams for insulation [71]. A PU/melamine formaldehide composite foam was prepared through foaming PU. The foam composite showed satisfactory fire retardancy and good comprehensive properties [72].

PU composites which could be used as damping materials with different amounts of hydroxyl silicone oil were prepared. The damping, mechanical properties, thermal stability and molecular groups were established. It was found that the composites with 8% hydroxyl silicone oil possess the best properties [73]. Sandwich composites made of a core of flexible PU foam and nonwoven poly (ethylene terephthalate) as the top and bottom panels were produced. The research found that such composites have functionalities of FR efficacy, acoustic absorption, heat insulation, electromagnetic shielding effectiveness and thus are suited for protective partitions [74].

Flammability

PU foams are in general flammable and their flammability is controlled by using flame-retardants (FR)s. Phenyl phosphonic acid and propylene oxide-based reactive FR polyol, together with limonene based polyol have been used for the preparation of FR/ PU foams. The phosphorous based polyols could be mixed with bio-based polyols to prepare highly fire retardancy and superior physico-mechanical rigid PU foams [75]. The study of a rigid PU foam showed that 3,3’,4,4’-biphenyltetracarboxylic dianhydride and 9,10-dihydro-9-oxa-(10-glycidoxypropilene)-10-phosphaphenantrene- 10-oxide lead to an increase in graphite in the fire residue and the formation of a better barrier to prevent burning by the condensed phase mechanism [76]. Rigid PU modified with microencapsulated red phosphorous, Mg(OH)₂, glass filler and hollow glass bead were prepared and showed that the fire retardancy and the combustion were improved [77].

A new, inherent, fire retardancy of the foams based on imide and oxazolidinone were investigated by LOI , vertical burning test and calorimetry. Cone calorimeter test data showed also that EG reduced the heat release rate (HRR), total heat release ( THR), and total smoke production. A low amount of EG added to PU increased the compression strength but as the amount increases the compression strength decreases [78]. It was found that the EG modified by poly (methyl methacrylate) and poly (glycidyl methacrylate) is an important product as a FR for foams made of PU-polyisocyanurate [79]. FR/ PU foams containing a nonreactive phosphonate (EMD) and EG were produced. This new complex increased the LOI and decreased the total heat release rate ( THRR), average effective combustion heat, peak heat release rate ( PHRR) and total smoke release of the PU foams [80].

New polyols containing 0.8-1.2 wt% boron and 7.9-8.5 wt% nitrogen were used to obtain rigid PU foams. LOI test as horizontal and vertical flammability tests showed reduced flammability and also improved thermal, dimensional stability and mechanical properties [81]. PU foams were also produced by mixing with a phosphorous containing polyether polyol (THPO-PO) and soybean oil-based polyol (SBP).Although the thermal stability of the foams decreased with the increase of THPO-PO amount, the flame retardancy was improved. LOI increased 40% .THPO-PO worked in inhibiting flame and forming phosphorous rich char layer [82]. A polyol made of mercaptenized castor oil and diethyl allyl phosphonate was used for preparing PU foams having different amounts of phosphorous. The closed cells amount in all the foams was above 95%.The results of flammability tests suggest that in the synthesis polyol could act as an essential FR for rigid PU foams ensuring fire safety [83].

The fire characteristics (heat and smoke) were studied using calorimetry test in the case of a composite made of rigid PU foams and flax fibers treated with a FR. The obtained research data showed that treated flax fibers besides improving the mechanical properties of the foam had a good prospect in reducing the fire hazard [84].

A new FR based on a P-N compound namely N,N’’N’’’- tri(diethoxy) phosphoramide (DTP) was synthesized and added to WPU foams. According to TGA data the combination restrained the decomposition, enhanced the residue at high temperature, higher LOI data were obtained and lowered the HRR. The cone calorimetry test indicated that the EG/DTP system jointly inhibited the fire intensity and the smoke production [85].

After a surface modification EG was introduce also in foams based on PU-imide. The foams exhibited outstanding enhancements compare to that of only pristine EG introduction in compressive strength, thermal stability and flame resistance [86]. Four wood-based wastes were incorporated into rigid bio-based PU foams; these were characterized by thermal and combustion properties. Filled PU foams with such wastes showed higher thermal and dimensional stability, however the thermal conductivities and flammabilities were similar to neat foam [87].

Acoustics

Using polycaprolactone diol, toluene diisocyanate, hydroxyl fluorosilicate and 2,4-diamino-3,5-dimethyl thiotoluene, a new Fluor silicon polyester PU was synthesized. The study of its properties indicates that it has an excellent water resistance which has acoustic performance, a low Tg and the fact that it is an ideal transparent product for underwater acoustics [88]. Using linear saturated aliphatic polyesters, methylene diphenyl diisocyanate and other reagents, high performance acoustic damping flexible PUs were produced. The study showed that sound proofing flexible PU foams under optimum conditions can be promising candidates for use as sound-insulating products [89].

With the finite element method PU sound absorbing panels were designed using for material formulation Comsol able to provide optimum performance of echo reduction with minimum thickness. The research shows that by judicious choice of matrix/ filler combination it is possible to achieve selective/broadband absorber for underwater applications [90]. Using Tung oleic acid-base polyol and polyether polyols a new biobased PU foam different from common PU foam was prepared. The study found that the biobased PU mean sound absorption coefficient and transmission loss can reach 0.515 and 21.389 dB [91].

Other Contributions

Fluorinated TPU (FTPU) elastomers based on 3-isocyanatomethyl- 3,5,5-trimethylcyclohexyl isocyanate poly(tetramethyl glycol) polycaprolactone and 4,4’[2,2,2-trifluoro- 1-(trifluoromethyl) ethylidene] bisphenol (BPAF) have been synthesized. The study of their properties showed that the thermal stability and mechanical properties are significantly improved by BPAF [92].

Fluorinated PUs (FPU)s having various amounts of fluorinated chain extender and the same amounts of poly (oxytetramethylene glycol) and diphenyl methane diisocyanate were synthesized in view to find the relationship between surface physico-chemical properties , the bulk microphase separation structures of these FPUs and their antifouling. The conclusion of the study is that the increased microphase separation of FPUs results in enhanced antifouling properties [93]. A WPU prepolymer was obtained based on poly(tetramethyleneglycol), isophorone diisocyanate and 2,2,3,3,4,4-heptafluoro-butyric acid 2,2- bis-hydroxymethylbutyl ester (HFBA) for a series of HFBA/WPUs; ethylenediamine was used as the chain extender. In vitro platelet and erythrocyte adhesion experiments revealed that increasing HFBA content also enhanced the hydrophobicity and reduced blood adhesion to the HFBA/WPUs [94].

The effect of the type of diisocyanates and glycols, degree of crosslinking, the amount of hard segments, crystallinity, the amount of hydrophilic groups on optical properties of WPU have been studied focusing on the matting effect and transmittance. The particle size of PU latex was the most important factor to influence the matting [95]. The effects TPU with various amounts of boron nitride has on DC and AC conductivities and the free volume have been investigated [96]. Results of dielectric/electrical studies of onion-like carbon/PU composite films in very broad frequency and temperature are presented in a study [97]. By studying the spinning technique and the fiber topology, it was found that the characteristics of the PU solutions influence the spinning process and is able to affect the fiber topology [98].

For more Open Access Journals in Juniper Publishers please click on: https://juniperpublishers.com

For more articles in Academic Journal of Polymer Science please click on:https://juniperpublishers.com/ajop/index.php

For more Open Access Journals please click on: https://juniperpublishers.com

[designforsocialimpact]

14 - The Magic Is Happening

The MDES cru starts prepping for our big event <<What Art Can Do...>> amidst a slew of final exams and presentations. Lots of personal victories, we brave the bright lights at a pop culture show and I strive to teach the beauty of a cinemagraph. Because well, MDES is classy like that and ‘tis the season.

Most of the team knows me for my bad-dad jokes. They make moments zip and they soften even the hardest of hearts. I'm not surprised if people secretly love to hate them. But I also know that they won't stop you from sharing them! So welcome to Monday, and How many tickles does it take to get an octopus to laugh? Ten tickles.

No tickles for us - our class for Research & Methodology converts this Monday into one-on-one sessions to review our thesis proposals. This week the projects feel more refined and practicing literature reviews has given each of us an appreciation for the science of research writing. [groan] For those of you keeping score - Amy: Refugees and Sports, Vaila: Identity, Clothing and Slow Fashion, Hanna: Universal Basic Income and Speculative Design, Rica: Blockchain System to Resource Favelas, and me, Smarti: Plastic, Un-plastic and Packaging Design.

The race is on for presentation phase next week. The presentation is a chance to showcase our proposals in front a panel who will judge our work and help us decide on our thesis advisors. I’m keeping my fingers crossed that there is an advisor in the lists available for my work AND who is stimulating but calming. I'm a nervous type and I work hard so I just need someone who can bounce ideas and release the pressure off my work pace valve.

In French that night we go over subjunctive tense. I would/I wish/I doubt. How perfectly ironic that in the second to last week of school we are talking about the expressions of necessity, possibility and judgment. A squiggle smile plays on my face as I say phrases Je doute que..., Je veux que..., Il est possible que... The moody french take no prisoners! Je reve d'avoir un chance. Wait, did I win? Is that subjunctive?

Tuesday is another back to back meeting day. We start with our beloved leadership class as Sabine leads us through a standing meeting. (This is a regular meeting but you get to stand. I really like doing these. It reminds me of a chiropractic exercise I did once at a yoga camp. It made me aware of all kinds of small things I do unconsciously with my body. Like I often collapse my chest downward and lift my chin when I sit. But when I stand, have to round my shoulders back and drop my chin. It corrects so much pressure in the lower back.) Today I say that I feel like that IKEA alarm clock that flips and changes colors. Lots of work ahead so lots of flipping to do.

Sabine even leads us through a presentation on how to do a proper pitch, and we get to learn about a project she did with design thinking in a development project with World Food Programme. The project was about break through the hierarchies and limitations in int'l development to  to get innovative ideas from the field. A lot of times we put pressure on international politics to solve things when they are incapacitated because of limitations of bureaucracies and hierarchies and quite frankly, funding. Grassroots work or even high-level int'l political work with a grassroots access and mindset can be part of a solution.

In the afternoon we reconvene the Design Thinking group to cover details on how to take the next steps for the event What Art Can Do [14 December, 6-9 p.m. We have such an amazing group of artists scheduled to speak at the event. It's been a dream (and a headache - gotta confess) putting all the details together right while finals are looming. Is all event management a bucket of planning and then one day of problem-solving on the fly? We shall find out.  Eventbrite tickets here: https://www.eventbrite.com/e/what-art-can-do-tickets-40799667905. 

In the evening I work to finalize the prototype Social Entrepreneur that I created to help them overcome a community-building challenge. It's all about getting people to galvanize around their cause, and for Champerché it's about getting them to explain just why bioponic gardening can be so great! Check out their crowdfunding site: <<https://bluebees.fr/fr/project/391>>

We're back at Draft Atelier on Wednesday where a couple of us are finishing our last printed pieces. We share the lab hour with the Transdisciplinary New Media cohort who will be judged for their finished work in a critique in another class. Our Design for Social Impact cohort will have to present our work separately. Ultimately the main goal is to learn how to 3d print, laser cut and how to use the CNC mill in relation to your work. So, since my project is about compostable, biodegradable and edible packaging I only found purpose for the 3d printer and the laser cutter. In the laser-cutter I worked to make a tessellated folding creation that will help me design an edible paper folded packaging. 

In 3d printing here's my small test take-away container box printed with biodegradable filament made of beer! (It gets covered by tree-resin coated paper cover and sits inside a cloth-sling packaging). This little thing took 1 hour to print last week so I'll have to purchase extra hours in the print lab in order to do a full test. I didn't realize that 3d printing can be so very slow.

In the afternoon I go to a meeting at Living Lab at La Villette in the top right hand corner of Paris. I've been in talks with the staff there about hosting my un-plastic creations in their upcoming exhibit on plastic. Fortunately, they like my prototypes (especially the beer filament 3d creation) and they offer me a residence in February, as well as a chance to present at the event and a space to do testing with my prototypes. YES! So I am dreaming up ideas on how to showcase possible finished work and how to prepare a presentation in french. Also, what exactly does a test-group interaction look like? Maybe I'll serve people food from my packaging and then ask them questions afterwards? I'll have to search around for answers...

This evening calls for a show with my French class at Le Quotidien. Our fearless professor Julie got us tickets to a night entertainment show. Think Daily Show. It's got all the lights and fake set furniture. The host seems nice, the topic is about Johnny Hallyday, the Elvis of France who died today. Apparently he was well known in France, but a most obscure person worldwide. We were told in advance to wear anything but black as the lighting crew prefers to have colorful audience. So here we are - colorful and happy and trying to follow along! I’m wearing green in the very back row, can you spot me?

Thursday is prepping at home for all the different deadlines coming up. Marina Hor-Meyll Lemos mocked up a funny ‘zine on finals - it cheered me up while prepping my bits. So here’s the line-up: Final presentations on thesis and French on the 11th. Final presentation in Leadership on the 12th. Final event for Design Thinking on 14th. Final presentation for Social Entrepreneurship and a manual turned in for Design Thinking on the 15th. So I use the day to move forward on each of these presentations. One by one. Afterwards I head to the gym for a long cardio session. I need to clear my head and zone out for a bit with some therapeutic gymming. I slip into a Netflix Outlander episode and enjoy every minute.

​Friday midday we meet back at our PCA classroom. We're practicing delivery on Leadership presentation. We each did different tracks in the leadership training modules provided by MakeSense. So each of us has different perspectives to share in the presentation. I think MakeSense will be pleased with how we brainstorm solutions for the future of this MOOC. 

Tonight I have a soiree with my husband's company so I get a dry-hair cut in preparation for it. Haven’t tried a dry hair cut before? They are absolutely divine.  I hear it’s a growing trend and I can see why. Who wants to stare at themselves looking like a wet dog while getting snipped? Not me. Bring on the dry cuts. I’ll never go back. We head out to the annual holiday gathering - this time booked at a small cafe in La Marais. There is music-a-playing, spouses a-glittering, ​and even a couple of vegan plates-on-offering! In the back I find a wall-to-wall bookshelf filled with antique books. My book-binding eye begins to twitch. I cannot help myself - and I slide some books out. I even find a random vintage copy of Walt Disney sci-fi books featuring none other than Les Castors Juniors Astronautes aka Huey, Dewey, and Louie Duck, nephews to Donald Duck go to the moon.

The night is complete with a walk down Parisian streets back to the metro. It's nice to hold hands and walk through the chill. There’s lots of sparkly lights glowing up the city. We're dolled up and it's likely the last time I'll feel so fresh because the weekend will be spent glued to my computer screen, typing away, designing the last bits and finishing all the work left on my to-do sheet. Finals are looming!

Saturday and Sunday is more of the same prepping for finals. Except I found a gorgeous cinemagraph that made all the work worthwhile. The magic is happening...