#Thermaltake

[mikufigureoftheday]

🖱Today's Miku "figure" is:🖱

Thermaltake Versa H26 PC case ver.

[littlerapas]

Mi nuevo case :3 con su patamon

[elvirusx]

I cannot put into words how badly I want this PC case.

[moddersinc]

Thermaltake The Tower 200 Mini Chassis Debuts New Green ColorsAuto Draft

Thermaltake released new additions to The Tower 200 Mini Chassis in the fan-favorite Turquoise, Racing Green colors, and this year’s new color Matcha Green. The Tower 200 is a tiny but mighty mini-ITX case, which comes with an iconic vertical case design that can accommodate a 4090 graphics card, and supports up to a 280mm AIO. Users have been looking forward to the multiple-color versions of The…

[gavbon]

Thermaltake TOUGHPOWER GF3 ARGB 850w Review

The TOUGHPOWER GF3 ARGB 850w power supply from Thermaltake is an 80PLUS Gold unit with the latest Intel ATX 3.0 spec and a 16-pin PCIe Gen 5.0 power connector

Thermaltake is no stranger to the Play3r website, with various products and awards across its ranges. Today’s review sees us look at the TOUGHPOWER GF3 ARGB 850w. We’ve replaced the old GF1 850w we looked at last year with this in our test bench to give it a thorough shakedown; let’s see how it gets on… Thermaltake TOUGHPOWER GF3 ARGB 850w: Specifications Thermaltake TOUGHPOWER GF3 ARGB 850w:…

[braillecortex]

it is so difficult to find any PC case with any sort of aesthetics with a 5 1/4 inch bay. I just want to put a disc drive in, dammit! Why should my PC have to look like it's from the 90s for that?

RB if you think CD drives in computers are not obsolete, but in fact still necessary, despite being artificially phased out

[glowcircuit]

I built a miniature Va11 Hall-A Bar inside of my PC!!

Va11 Hall-A PC Parts & Build list

PC:

CPU : Intel I9 14900k

GPU: Intel Arc A770 16gb

Ram: Corsair Dominator 64gb 5600

Mobo: Maxsun Terminator Z790 D5 wifi

Hard drives M.2: Samsung 990 pro 2tb, Samsung 970 evo plus 1tb, CT 1tb,                                 Adata 500gb

PSU: ROG Thor 850 P2

Cables: Cablemod.com custom shortened and sleeved

Water loop distro : EKWB FLT 120 reservoir + D5 pump

Water loop cpu block: ThermalTake Pacific Mx2 Ultra 

Water loop radiators: Alphacool HPE 20 x 2

Water loop hardware: 15 Alphacool, 3 EKWB, 2 Alphacool soft, 2 granzon    

Water loop tubes: EKWB Acrylic tube 14mm, Alphacool 13/10 soft

Air Cooling : ThermalTake Toughfan 120mm x 3  + Controller

Air Cooling : Noctua 40mm pwm server fan x 2 (non visible)

Additional RGB Control : Coolermaster controller

Case:

Lian Li PC V600, left side mount, released in 2006, I acquired it in 2015 from PC Recycle in sodo Seattle.

I had to track down a new foot, one had been missing since I acquired the case (ebay)

Mods:These are the case mods I did personally

Cut a hole for the cpu mounts in the Motherboard mount plate as this case was designed for older hardware 

Cut two 120mm blowholes and added aluminum covers (Dremel)

Cut Front and rear windows into side panels (Dremel Max)

Moved PSU from vertical placement in the lower right side of the case in front of the CPU  to horizontal placement in the top left in old drive bays. 

The PSU bracket had to be cut to show the OLED on the side. 

Modded the side panel rail slide to accommodate the PSU, I used the original aluminum stand the psu was on, cut in half and epoxied with JB weld. 

Changed and moved Power/ Reset switch to the back of the case, shortened and spliced the cable

I cut and bent my own 14mm acrylic tubes (hobby miter, heat gun). 

Cut and made two way mirror for the front panel

Plastic "truss" is both functional and aesthetic. It came from a Gunpla accessory kit and has two cables passing through it and it acts as the GPU support. I could only get red and had to paint it.

Notice that some logos are missing/ covered, I dislike having a case as an advertisement. The Rog eye on the PSU is mostly covered but iykyk, most of the word "Intel" on the ARC GPU, Two of the Thermaltake logos on the fan edges, the Paint on the Thermaltake Mx2 Ultra and Maxsun terminator heatsink. (I will eventually cover the visible SSD with a heat sink, cover the fan info on the rear and work a cover for the word "dominator"). the one logo explicitly unchanged is the LianLi case badge, if I think of a perfect replacement, maybe then.

Mod I did not do:

I did NOT shorten and sleeve my own cables, I used cable-mod.com. I am not confident in my ability to do this.

BAR:

"Bar Tiny" Re-ment sets from Japan, 17 sets involved. 

 I customized the color of the bar and chairs and shortened one table for the mezzanine. The whole bar, minus barback- is on a removable 7 inch piece of black acrylic for cleaning.

Jill Stingray Nendoroid

Jils Cat, it sleeps on the GPU

Jill Stool: Jill is glued to a cute doll stool to see over the bar

Jill Accessories non-Nendoroid: cellphone, purse, coat (ebay)

Dorothy Haze Nendoroid

will be added on release.

Bar Back:I made this myself

Black acrylic sheet, and frosted acrylic rods.

Doll Light power kit: 8 Led lights, 4 incandescent lights

USB Doll light power strip

Other Bar Accessories:

Overhead Hanging farmhouse light

trash, mop, broom, pan, mop bucket, 

2 blue fuzzy chairs 

Miniature plants

Miniature Microphone

Mini bottle Dom Perignon, an xmas gift from my friend nemo, it's

 on the top shelf 

Problems and changes:

1. ARGB, pretty pretty pain in the ass. 4 pieces of software........

2. The water loop was changed extensively as hardware came in and space limitations were discovered. The biggest change is that I originally planned to have one radiator on the front of the case, the tubes running over Jills head and to light the tubes as lighting for the bar, to do this the fan would have been in the case proper pushing the whole bar to far into the mobo, it didn't work, so the loop was moved to the top of the case and caused me to have one complex bent tube 

 Second, I had planned the loop to use one sideport on the distro, but space limitation moved both ports to the top causing the complex fittings setup in that corner.   

3. The MOBO, sigh. This has been clearly the most challenging choice I made in this build, I really wanted it to work perfectly too, but I rolled those dice because: Aesthetic+function, the board I wanted (https://en.colorful.cn/en/home/product?mid=84&id=400d19bc-5655-49e1-b391-df00b60935ef) was to great a risk for the cost. This was a silver medal. 

I generally dislike the design options I had in the Z790 series of the big board makers (I  HATE big logos), especially the full ATX, there was one M that interested me, I should have picked it . This board has potential, but the BIOS is underdeveloped and compatibility has been problematic, I had to do a tricky outdated style BIOS update right from the box, and have had to reset the cmos a couple times. It skips BIOS on general boot and though stable, it will have to be addressed eventually, it doesn't have a proper sleep because of some issue between uefi & legacy. It may end up replaced, which will require a full build teardown.

the Turbo fan built into the board doesn't seem to function

Alos, the two argb connections on the mobo dont work, or I can't get them to recognize anything, necessitating the Coolermaster controller for the PSU and Distro. it is shoved behind the distro along with a Noctua 40mm

[talleyran]

Тихая сборка для Эсти

Собрал новый ПК для Эсти. Основным приоритетом была тишина, потому что её очень сильно раздражает шум, который издаёт ноутбук. Конечно хотелось, чтобы шли все современные игры, чтобы ничего не глючило и чтобы этого железа хватило на несколько лет, чтобы вообще не думать ни про какие апгрейды. А ещё, чтобы весь сетап был белый, потому что так захотелось мне.

Корпус be quiet! Pure base 500DX white — тихий белый корпус с хорошей звукоизоляцией и отличными тихими вентиляторами в комплекте.

Материнская плата MSI MAG B760 Mortar max WiFi — в неё все влезает, есть вайфай, хорошие радиаторы и встроенный звук.

Процессор Intel Core i5 13400F — более менее холодный процессор, но достаточно производительный, чтобы тянуть видеокарту и DDR5 память.

Видеокарта Gigabyte RTX 4060 Ti Aero OC 16 Gb — брать что-то более старое смысла не было, а у этой версии запас видеопамяти и отличное охлаждение с центральной вертушкой в противофазе. И еще она белая.

Оперативная память DDR5 Kingston Fury Beast white 32Gb — в 24 году не DDR 5 наверное уже неправильно, а еще я люблю Kingston.

Диск SSD M2 Kingston Fury Renegade 1 Tb, очень быстрый, правда чёрный, но под радиатором на материнке не видно.

СЖО XPG Levante X240 — самая тихая, не свистящая и не пердящая водянка по отзывам. Вроде не соврали.

Блок питания Thermaltake Toughpower GF1 Snow 850W — сертификат 80+ Gold и белые провода. Что еще надо для счастья?

Монитор Andor Gaming AF24H1 FullHD 144Hz IPS — внезапно топ за свои деньги с такими характеристиками, за исключением родного кронштейна.

Клавиатура Dark Project KD87A Gateron teal — белоснежная механика с линейными свичами, шумкой, стабами и адресной подсветкой в том числе кириллицы.

Мышь Logitech Signature M650 — про эти мыши я уже писал, они офигенно лежат в руках и кликают тихо. Так же есть белая версия.

Кронштейн ONKRON G80 — единственный минус монитора выше — огромная нога, которая занимает пол стола. Хороший кронштейн избавляет от этого недостатка.

На столе ещё удачно вписалась лампа Xiaomi Mi Led 1S, но она у нас уже давно была.

В целом я очень доволен тем, что получилось, даже немного по-доброму завидую, потому что мой ПК уже старьё по сравнению с этим 😊

Главное, что он вышел действительно очень тихим даже на высоких нагрузках, так что цель достигнута.

[purringbonehead]

Supr proud of this thing so I'm reposting it again w Specs this time because there's a mentally ill Teenager bouncing around inside of me Giggling with No one to geek out about this 2

•GPU: MSI GeForce 2x ventus 4070

•CPU: AMD Ryzen 7 9700x

•MOBO: MSI B650 gaming plus wifi

•PSU: Corsair RM850x RMX

•CPU fan: Endorfy Fera 5 black

•RAM: G.SKILL Trident Z5 royal DDR5 2 x 16

•HDD: 4TB Western Digital

•Case: Thermaltake view 380 tg argb hydrangea blue

[a-student-out-of-time]

Yeah I wonder who he’s getting chocolate from.

Hey, look who's here!

Hm?

Hi, Souda-kun!

Uhh, h-hey, Arima-san.

Don't worry, I'm not gonna say anything cheesy again, I promise. I'm just here to help Chihiro.

But how's your day been?

Oh, y'know. It's been alright.

My little brother's on a date right now, lucky him. Mostly just had the day to myself.

Yeah, being single on Valentine's Day. I know the feeling.

But hey, thanks to Chihiro, I've been keeping busy, thanks to this G-Force RTZ 4080 Super...

Ah...

Terabyte B750F Torus Master motherboard...

Ahhh...

...All in this Thermaltake Versa H20, complete with a tempered glass window!

Whoa, is it getting hot in here...?

And that's how you flirt with a tech guy!

Yeah, hehe!

[crowcryptid]

it’s not released yet but I think this is the case I’m going to get, assuming it’s big enough and doesn’t have any major issues. It’s the tower 600 from thermaltake if anyone is curious.

Gotta watch reviews once it comes out to decide

The gpu mounting is what worries me. Especially cause my gpu has a support bracket that is screwed into the case.

[nataliabdraws]

I saw on Insta that you got a new PC. Here is the obligatory "specs?" question.

Oh boy. I’m gonna get torn to shreds for this I know it. So here’s the big reveal: it’s a prebuilt.

I know I know.

But as someone who is a lifelong Mac user I don’t feel comfortable enough to build it myself yet since I have so little experience with this type of computer. I did make sure to get a prebuilt that would allow for upgrades in the future so as I get more comfortable I can make changes.

This pc is a ABS Stratos Aqua.

Here are the specs directly copied from the site:

Operating System: Windows 11 Home

CPU: Intel Core i5 13400F 2.5GHz (4.6GHz Turbo Boost Max) 6 P-Core, 4 E-Core, 16-Thread

GPU: MSI GeForce RTX 4060 Ti Ventus with support for DLSS 3 - AI-Powered Performance

Motherboard: MSI B760 Motherboard

RAM: Kingston Fury RGB 16GB DDR5 5600MHz (2x8GB)

SSD: Kingston 1TB M.2 NVMe SSD

CPU Cooler: RGB Air Cooler

PSU: Thermaltake 600W Gold

Case: ABS Stratos S200 White with tempered glass

Dimension: 18.11" x 8.27" x 15.56"

WiFi: Yes

Bluetooth: Yes

VR Ready: Yes

I do plan to upgrade the i5 and the RTX 4060 to something better in the future but for what I need now I think it will be fine!

[pancakeke]

thanks for putting this screw for far back that it's obstructed by the motherboard's sata and and m.2 connectors I love you thermaltake

[moddersinc]

New Toughpower iRGB PLUS 1250W/1650W Titanium Power Supply by Thermaltake

Thermaltake is excited to declare the send-off of the Toughpower iRGB In addition to the Titanium series, Thermaltake’s most memorable computerized power supply with ATX 3.0 norm and accessible in 1250W and 1650W. The PSUs are completely measured and come in the components of 150mm(W)x86mm(H)x180mm(D), 80 Or more Titanium productivity, and consolidate a Riing Team 14 RGB Fan with 18 addressable…

[gavbon]

Thermaltake CT120/CT140 ARGB Sync PC Cooling Fan Pack(s) Review

Thermaltake has sent the CT120 & CT140 ARGB cooling fans for today's review, with short daisy-chained cables that connect directly to the motherboard.

Thermaltake is well known for their radiator fan kits with the SWANFAN and TOUGHFAN range, and for a short time now I’ve been saying that they need to complement these with airflow fans that you can use as a case fan. Today they’ve answered my prayers with the CT120 & CT140 ARGB (and non-ARGB) dual fan kits. Let’s take a look… Thermaltake CT120/CT140 ARGB Sync PC Cooling Fan Pack(s) Review:…

[transienturl]

this is. so random. but.

it's been really fun to see all of the high-performance pc fans coalesce around the same general fan blade shape. and by fun I mean sort of silly, because... I mean, you would think that for the however many years before this one that people had been making PC fans they would have actually bothered figuring out the correct shape to make the blades, but whatever

but yeah. after having swapped every fan in every product he buys for a cheaper, quieter, and higher-performing Arctic P14/P12, my dad has enough of them to build a small house.

back in 2018, noctua spent what I assume is an exorbitant amount of R&D money creating the industry's highest-end and most expensive 120mm fan, the NF-A12x25. thermaltake was roundly criticized for immediately copying them.

in 2022, corsair finally got with the program and redesigned its fans to create the AF140/AF120 elite. it has recently come to the attention of some big reviewers that thermalright's peerless assassin cooler is probably the best deal in cpu coolers, driven by its very competent TL-C12 fans.

this post probably looks completely absurd. yes, you are saying, those definitely are fans with smooth, scooped, very forward-swept blades. like a fan. what is your point.

I need you to understand something. for years, the standard budget cooler to recommend was the cooler master hyper 212 evo. we had people buy, over many years, what I assume is many, many millions of these. I had one. it was fine, albeit somewhat whiny at higher rpms. but... okay it is hard to illustrate this, but the outer centimeter or so of these blades sweeps out in the wrong direction! that is not how air works! whoever designed this was presumably just like "this looks fancy let's do it." I mean, there is nothing fundamentally wrong with that, but like... it doesn't cost you anything more to manufacture it the right way, right? if you shaped the fan correctly you could reduce the size of the fin stack slightly for the same noise level and save what would have turned out to be like multiple tons of aluminum! idk.