#Change BMW CAS4/CAS4+ Mileage

[eobdtooluk-blog]

Yanhua ACDP1/ACDP2 Change BMW CAS4/CAS4+ Mileage Tutorial

How to use Yanhua Mini ACDP (ACDP1/ACDP2) to change mileage on BMW CAS4/CAS4+?

First remove the cluster from the vehicle before resetting the CAS mileage via OBD, and then disassemble the instrument chip to modify mileage. After modification, install the instrument panel back to the car and check if the new mileage is correct.

Yanhua ACDP 1/Mini ACDP 2 OBD connection:

Step 1: Reset CAS4 Mileage via OBD

Open Mini ACDP APP

Confirm the ACDP device is connected

Select BMW>> CAS1~4 >> CAS4/CAS4+>> OBD mode>> IMMO/Mileage>> Reset mileage

Use the ACDP standard power adapter (voltage+ 12V, current>=2.5A)

Device is being reconnected

Connect ACDP with vehicle OBD port

Make a screenshot to save the vehicle info incl. original mileage read out

Pay attention to the on-screen prompt:

Need to disassemble the dashboard from car and modify the mileage first, put it back after resetting the CAS4 mileage.

If the ECU does not pre-process, preprogram it first.

Backup coding file…

Backup file succeeded. Pay attention to the path to save the file

Pre-process ECU system finished

Reset mileage finished

Record the operation log path

Select OBD detect

Confirm use the ACDP standard power adapter (voltage+ 12V, current>=2.5A) and connect Yanhua ACDP2/ACDP1 with vehicle OBD port

Now the CAS mileage has been set to 0.

Identify system info finish

Step 2: Change Mileage of the Instrument Chip

Disassemble the instrument to confirm the instrument chip

Select M35XX and select the corresponding chip type (i.e 160DOWT)

The overall connection diagram of the instrument chip (ICP method and OBD method) is shown in the following figure.

Select Modify mileage

Confirm use the ACDP standard power adapter and connect ACDP device with M35XXX adapter

Detect probe Pins successfully. The test results are normal.

Save the result

Check if the mileage read is correct (i.e.140856)

Input a new mileage (i.e.50000)

Program execution completed

Select Backup data

Confirm use the ACDP standard power adapter and Mini ACDP 1/ACDP-2 device connect with the Yanhua M35XX adapter

Test the probe Pins successfully

Save the data and remember the file name

Modify mileage successfully

Finally, install the instrument panel into the car and check if the mileage displayed on the panel is normal.

[sparkegg]

XTOOL Professional Products OBD2 Key Programming Update Notice

Xtool key programmer has cost-effective professional programming tools such as Xtool X100 PAD3, X100 PAD2 PRO, X100 PAD which can provide customers with the most needed functions when performing key programming. They can satisfy the actual needs of different users, for example car enthusiasts, automotive repair factory and workshops. OBD2 professional tools has increasingly become one of the most critical parts concerned with car users.

Let's come and see the Xtool majorkey programming update in August 2020:

Porsche-2011-2017 all vehicle series V26.20

>Read DFlash

>Generate dealer key

>Learning key

HIGHLIGHT:

Support disassembly and reading of front-end electronic control module DFlash

Support generating Porsche 49 chip dedicated key

Support all lost of all vehicle models from 2011to 2017"

GM Buick/Cadillac V27.80

>Add 2020Buick ENCLAVE smart key matching

>Add 2020 Cadillac CTS smart key matching

HIGHLIGHT:

Support OBD read password

BMW V26.35

>Improve the preprocessing CAS4 and upgrade the CAS4 version library of all CAS4 models

>Add CAS4: reset mileage function

>Add MV1722 engine: read ECU information, read ISN, write ISN, write VIN

>Add MS450DS0 engine: read ECU information, read ISN

>Add MEV9N46L engine: read ECU information, read ISN

>Add MSS60engine: read ECU information, read ISN

>Increase MSD851 engine: read ECU information, read ISN, backup FLASH, restore FLASH"

Toyota V26.71

>Smart Key all lost "Optimize KC501 to generate analog keys

>Add 94 types of immobilization data backup and analysis (2007 Corolla Smart key)"

BVD V26.35

>Optimize matching engine computer

HIGIHLGHT:

Support ECU change matching

SGMW/Baojun ->Wuling V26.11/Baojun V26.51

> Add password-free matching

HIGHLIGHT;

SGMW/Baojun all series password free

Brilliance-Zhonghua V7 V26.57

>Add intelligent key programming function

Changan-CS55 PLUS/CS85 V27.40

>Add CS55 PLUS integrated vehicle body control system, remote control matching and BCM matching

>Add CS85 vehicle body system (Delphi IBCM), key matching, Bluetooth key matching and anti-theft matching"

HIGHLIGHT:

Support all lost

HaiMa-S5 second generation V26.70

>Add Tiejun body, mechanical key and remote control match-ing, smart key matching, BCM learning

>Add Jinzheng Carl vehicle body, remote control matching

HIGHLIGHT

Support all lost

Futon-Savannah/Auman(heavy truck)/Aoling(light truck)/M4 V26.20

>Add remote control matching

Learn more: Top 3 XTOOL Key Programmers Review 2020

[icarscan-blog]

2004-2018 BMW CAS3CAS4 (AKL) Key Programming VVDI2 Or VVDI BMW Tool

I need a BMW device to do key programming for 2004-2018 BMW both spare keys and all keys lost (CAS3/ CAS4) and read BMW ISN. Which is better between VVDI2and VVDI BMW tool?

This is a customer consultation from OBD2TOOL.

Compared two Xhorse BMW key programmers, we suggested using VVDI BMW.

VVDI BMW is not only for the locksmith, it also has functions of coding and programming and much more.

VVDI for BMW has the possibility for manual coding and changing cars vo (vehicle order), emergency flash and retrofit options

For the people who already are familiar with BMW, this tool is a mix of Esys and VVDI. It’s very powerful and easy to use.

Xhorse VVDI BMW tool Highlights:

1.Support E chassis/F chassis Programming function 2.Support E chassis / F chassis code function 3.OBD key: Support CAS1/CAS2/CAS3/CAS3+/ISTAP/ etc. 4.File Generation Key:

Supports CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+, etc. 5.Support FEM/BDC system to generate keys, replace FEM/BDC control unit, support reset mileage 6.Supports mileage correction  CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+ 7.Support for reading EEPROM and sync data for CAS1/CAS2/CAS3/CAS3 systems 8.Support simultaneous engine and CAS, synchronous ELV and CAS 9.Support reading SN data from the engine

In addition, VVDI for BMW is cheaper than VVDI2.

[qingqin]

CGDI BMW Newest Test Report & Review

CGDI BMW come with OBD, FEM/BDC and CAS4+ function by default, no need pay extra, it is cost-effective BMW key programmer for DIY user. Here we collect some test report and review from customers, hope it is helpful for you.

CGDI BMW Prog Test Report: cas4 F10 – ok (new key) cas4+ F10 – ok (new key) isn from org key or dump DME fem/bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE cas3+ E60- ok , downgrade and make key with isn from org key CGDI PROG bmw f20 2014 mileage reset OK Read ISN DME MSD80 OK 5WK93628 program bdc key via obd for bmw x6 ok! add key to bmw x5 successfully program key to 2016 BMW 5-series ok program key for BMW 523Li OK Program BMW FEM all key lost done! program FEM for F30 328 2013 ok programing orignal key for BMW 325 ok add new key to BMW 3 series ok. program bmw m3 key done! Cas 2 – E60 2005 lost key – Obd – not working ( no option to program from dump) Cas 3+ E87 2008 spare key – eeprom dump – ok F10 – key from dump – OK F10 LCI – key from dump and isn from working key – OK F10 LCI – key from dump and isn from DDE – OK E60 LCI – downgrade CAS3+ and key via OBD – OK

CGDI Prog BMW Review and Feedback: CGDI for BMW can reprogram EGS for 2009 for BMW x5. CGDI Prog for BMW supports for BMW 650i 2003 all key lost. CGDI for BMW can read and write the ISN EWS egs for BMW M5 F10 dct gearbox 2013. Can read from DME and write into egs. CGDI PROG for bmw f20 2014 mileage reset OK Read ISN DME MSD80 OK 5WK93628 Excellent tool so far. no bricks or problems. extremely fast for cas1, 2 & 3 for cas3+ if need downgrade 10 minutes and seems safe. make sure you have proper power on the car

You can reuse an old key and reprogram it, there is a button that says unlock key. I tried and worked with aftermarket key, did not try on a original for BMW key to unlock(tested on e60 cas2) and yes it is safe if downgrade for CAS3+.

Read ISN form MSV80 result OK Read and write ISN cas 3 result OK

Did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully Did a 2008 E60 528i it asked for Downgrade it took around 10min no error codes all perfect key works

Instructions for cas4 F10 key programming: Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generate key. It can no ne done by obd. You need xprog or vvdi prog to read the dflash.

CGDI BMW package newly add Reading 8 Foot Chip Free Clip Adapter for free

[myemilyzhang]

How to download and install BMW EF scanner V2018.12 (Explorer)

BMW E/F Scanner V2018.12 (Explorer) free download and installation guide and tips.  2018 BMW E/F scanner (Explorer) can perform full capacities incl. BMW Diagnosis, IMMO, Mileage Correction, Coding etc.

2018 BMW E/F scanner (Explorer) free download:

https://share.weiyun.com/5puEb7b

Password: ikmumq Contributor: the engineer working for www.obd2tool.com Security: 100% safe Works on 2018 BMW E/F scanner full version

***Everyone knows that buying BMW Explorer would be the right thing to do but it is crazy expensive and while if you can’t afford to invest that kind of money in tools for now, that’s no bad to take a chance on clone tools like this.

File including

Software version: BMW-Explorer v18.12.03 Added new versions of  SWFL for FEM/BDC and DME/DDE Fixed programming FEM/BDC/EGS/DME/DDE Operating system: Windows 7 – Windows 10 Language: Russian /English

Function: Full version supports BMW Diagnosis + IMMO key programming + Mileage Correction + Coding

Full Version Feature: 1.Basic features module 3. E-series Coding module 3.E-series CAS1, CAS2, CAS3, CAS3+  mileage Reset 4.E-series keyprog module 5.FEM/BDC mileage module 6.F-series mileage correction module 7. FLASH calibration READ/WRITE calibrations for F and G series models 8. ISN reset for F-series HP8 gearbox 9. FEM/BDC keyprog module 10. ISN MSx8x (SIEMENS) for BMW 11. F-Coding module 12. Tricore module for BMW 13. CAS4 CAS4+ F-series keyprog module with F-ISN

Using Tip: 1. Please ensure the car has enough power supply especially for programming, coding, ISN reset. otherwise, the programming job won’t be done, or the control module get broken. 2. Don’t set the computer to standby, because the programming will take a long time for example reading ISN code will take over 30 minutes, if the computer is set to standby, the programming job won’t be done, or the control module get broken.

BMW E/ F scanner V2018.12 (Explorer) installation (Words & images)

Paste all zip files and extract them all on desktop

Open BMW_v018.12.03 folder

Run BMW_Explorer_v0.18.12.03 sofwtware as Administrator

Press Next to install device driver Accept license agreement

FTDI driver installation finished

Install WHQL Certified driver until success

Connect BMW E/F scanner with laptop

Open Device Manager to check interface is well connected and current COM Port

Run BMW Explorer software on desktop as Administrator

Press Setup and search COM port

Detect COM Port 5 and confirm

Software is installed and ready to use

You can run a qucik self-test first

Open ECU

Coding

Edit AIF

Change VIN

RAM/FLASH

In Extra options, you can read ISN, reset adaptation, register battery, update ECU etc

In EF 20181203 folder, you can directly run BMW EF 201812 software as Administrator

and do qucik test and perform other functions.

Done. Connect BMW E/F scanner with laptop

[mrcutfish]

BMW AK90+ II and AK90+ Programmer,which is better?

BMW AK90+ II

compares

BMW AK90+

: both are the best

BMW EWS key programmer

; BMW AK90+ II update:

add the key info reading function for new

F series

CAS4/CAS4+/

and new Porsche, also the key renew functions for BMW CAS1-4

.

Part 1:

BMW AK90+ II

Vs.

BMW AK90+

: the Differences

BMW AK90+ IIUpdate:

BMW E series PCF7945 chip

The

original factory PCF7953 chip

renew function (restore to a new key state)

New BMW F series CAS4/CAS4+/ new Porsche: adds key information identification function.

Automobile fix

The package: not the same

AK90+ II package comes with one

6 Pin Cable

( image 1);

AK90+ with

10 pin cable

(image 2).

You can see the package includes one piece of AK90+ II Host,

AK90+ II 6 Pin Cable

, AK90+ II Chip data to read specific seat, AK90+ II software CD-ROM, AK90+ II USB communication cable etc.

auto key cutting

AK90+ package includes AK90+ Host,

10 Pin Cable

, AK90-Chip data to read specific seat, AK90 V3.19 software CD-ROM, AK90+ USB communication cable.

Part 2:

BMW AK90+ II

Vs.

BMW AK90+

: the

Similarities

  Best BMW EWS key programmer:

Both can program key for

EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4

from

1995-2009

functions : Same

Directly reading data dumps from MCU which marked 1D47J,2D47J,0D46J,2L86D without removing MCU from circuit board,easy to do yourself. 2. With the help of software you can change VIN,Mileage and renew, lock or unlock keys as well. 3. Programming original chips “EML 10030A” for making keys . 4. Identifying keys for all EWS ,showing VIN, key No. and mileage .

Way:Same

No need to disassemble the chip, safe and efficiently.

Language: English, Chinese

OS:WinXP, Win7

Conclusion:

AK90+ II wins in functions.

AK90+ wins in Price (35USD only)

[diyobd2]

CG PRO Odometer Correction BMW E91 Dashboard & CAS4

How to do BMW E91 dashboard and CAS Odometer Correction:

BMW Odometer correction tool:

CG PRO 9S12 programmer for MB BMW LandRover Porsche

Digiprog 3 universal odometer correction tool

You have to know:

For BMW CAS, it’s necessary to correct odometer for both dashboard and CAS.

For BMW EWS, it’s okay to have dashboard odometer correction only.

How-to’s:

Step 1: BMW dashboard V4 (35080 VP/V6) odometer correction

Step 2: BMW CAS4 1L15Y odometer correction

In detail...

Step 1: CG PRO change mileage BMW dashboard V4 (35080 VP/V6)

Select a model

Brand: BWM

Function: Dashboard

Model: V4 (35080 VP/V6)

Read data

Successfully read data

Save file

Operation completed!

Exit!

Run CG PRO software as administrator

Select a model

Brand: BWM

Function: Dashboard

Model: V4 (35080 VP/V6)

Open file- original eprom bin file

Adjust mileage

Enter a new km as odometer correction

Here:1000 KM

Step 2: CG PRO change mileage BMW CAS4 1L15Y

Wiring diagram of DB25 Adapter

Wiring diagram of CAS4 1L15Y

Close CG PRO wiring diagram

Select a model

Brand: BWM

Function: Anti-theft

Model: CAS4 1L15Y

Open file- CAS4 bin file

Adjust mileage

Enter a new km as the new mileage

Here: 1000KM

Note that, the dashboard mileage should be the same as CAS4 mileage.

Reference: CG PRO User Manual for details.. here you go

http://obd2-diag.blogspot.com/2018/01/cg-pro-user-manual.html

What is CG PRO

where to buy a CG PRO

How much do you know CG Pro

CG PRO software download and update

How to install CG PRO driver + software

CG PRO car list download

[eobdtooluk-blog]

Lonsdor K518 Pro Vehicle Support List

Lonsdor K518 PRO Key Programmer has built-in LKE, and supports Bluetooth, file management, anti-theft deactivation, access card copy, data Write Initialization, EEPROM data mileage restoration, CAN-FD Protocol & DOIP Protocol.

Which vehicles can work with it? Check the support list below.

Highlight model list:

Support Volvo S40/ S60/ S80/ S90/ V40/ V60/ V70/V90/ C30/ C70/XC40/XC60/ XC70/ XC90 all series IMMO

Support latest Toyota/Lexus chip type 8A/4A smart key programmed with free pin code

Support 2015-2018 Land Rover/Jaguar key programmed via OBD (no disassembly required)

Support Land Rover/Jaguar 2018- Change RFA module to program smart key

Support 2018- Land Rover&Jaguar -Turn off UWB PEPS function to program smart key

Support Latest Mazda smart key all key lost w/o PIN code

Support Latest Honda chip type 4A smart key all key lost

Support Latest Subaru chip type 8A smart key programmed

Support Latest Nissan New Sylphy B18,X-Trail T33 smart key all key lost

Support Latest Hyundai/Kia chip type 4A/47 smart key programmed

Support Latest Ford Mustang IMMO program

Support BMW CAS1/ CAS2/ CAS3/ CAS3+/ CAS3++/ CAS4/ CAS4+/FEM/ BDCIMMO

Support Latest GM CAN-FD protocol IMMO

Support 90% of 2010-2020 GM models read pin code from BCM

Support Volkswagen/ Audi/ Skoda/ Seat MOB platform IMMO and odometer adjustment

Support Ssangyong smart key and mechanical key program

Support Latest Maserati read pin code and smart key program

Support Ferrari (458, F12, F149) key programmed via OBD

Support key programming for European cars such as Renault, Fiat, Opel, Peugeot, Citroen, Alfa Romeo Lancia, Dacia, etc

Support key programming for American cars such as Dodge, Chrysler, JEEP, Buick, Cadillac, Chevrolet, and GMC, etc.

Support key programming for Asian cars such as Toyota/Lexus, Honda/Acura, Mitsubishi, Subaru, Nissan/lnfiniti, Hyundai, Kia, and Proton, etc

Support key programming for luxury cars such as Porsche, Land Rover, Jaguar, Lamborghini, Bentley, Ferrari, and Cadillac, etc

Support key programming for Chinese cars such as BYD, Great Wall, Geely, BAlC, Changan, Roewe, MG, Lynk &Co, etc

Support electric cars such as Leading ldeal, Denza, Leap Motor, etc

Support other functions like chip decoding, chip simulation, chip identification, remote generation, smart key generation, and frequency identification

Support generate key chip like 4D, 46, 48, T5, 7936

Read also:

Lonsdor K518 Pro vs. Lonsdor K518ISE/K518S:

Lonsdor K518 Pro vs. K518ISE (Function, System, Software License, Accessories):

[mrcutfish]

Which BMW key programmer is best for you?

BMW key lost or need a clone? which BMW key programmer to use? When you plan to buy a BMW key programmer online, have you wonder which key programmer do I know? Have you ask yourself or your friends like this “among these BMW key programmer supplied by the seller, which one should I buy”? In the following parts, I will list some BMW key programmers, and generally tell you their similarities and differences. CGDI BMW   1.High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 1. 2.Support Key Programming for BMW CAS1/CAS2/CAS3, and Support Key Matching and All key lost for CAS4 /CAS 4+; 3. Support BMW Key Programming with OBD Functions 4. Software response fast, short time programming, and new breakthrough in operation safety and technical support. 5. Supported Languages: English, Chinese 6.  Certification: CCC,CE,GS, CCC,CE,GS,ISO 7. Warranty:1 year 8. Free Update Online on official website http://www.cgprogcar.com/?langid=en, when you receive the device, please download software on official website too. 9. Newly Add BMW FEM/EDC Function for free http://www.cgdishop.com AK90 Key Programmer AK90+ For All BMW EWS Newest AK90 BMW KEY-PROG V3.19 is a safe and effecitive key match tool for BMW EWS system. It covers EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4,can read all EWS key information from 1995-2005. Newest version:V3.19 AK90 Functions: 1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself. 2. With the help of software you can renew , lock or unlock keys as well. 3. Programming original chips “EML 10030A” for making keys . 4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews. BMW CAS AK300 AK300+ V1.5 Key Maker AK300+ BMW CAS Key Maker (Support in 2002 -2009 years) especially for BMW CAS system key programmer.Support new BMW CAS,CAS2,CAS3,CAS3+. Automatic analysis CAS data,easy to match keys. AK300 highlights in features and functions: Highlights: Language: English, Chinese Operation System: Windows XP Car Coverage: BMW 2002 -2009 Year Firmware Version: 1.16 Software Version: 1.50 Support new BMW CAS,CAS2,CAS3,CAS3+. Automatic analysis CAS data AK300+ Features: 1 BMW CAS supports a diagnosis of communication directly through the OBD port or through the CAN BUS port security to read and write data EEPROM; 2 automatic analysis CAS data, automatically displays the BMW keys to use quantity; key tooth number; remote control frequency; CAS with the DME synchronization ID; keys scrapped the state, etc.; 3 supports key scrapped or restart using the old key; this technology unmatched global technology; 4 supporting the rehabilitation of CAS computer (due to transfer table is damaged or programming lock); 5 supports the new 2002-2009 BMW CAS; CAS2; CAS3; CAS3+ 6 support the horse CAS; CAS 2; CAS 3; CAS 3 + BMW and BMW remote key. 7.support E65/E66/E87/E60/E61/E90/E91/E92/E93/E71/E71 HiTag2 V3.1 Programmer HiTag2 v.3.1 programmer is universal key programmer, with additional options of key programming from dump and PIN extraction. Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically. Language: English Functions: 1.BMW (CAS1/2/3/3 +) at 912/9S12 immo + remote control, editing, KM, VIN, reading data from the key, read / write eeprom of the transponder, reading data from remote 2.AUDI (Kessy) on 93C66 immo + remote, read PIN, edit VIN number and immo 3.VW (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo 4.PORSCHE (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo 5.BENTLEY (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo 6.CHRYSLER (State) on the 95040/95080 immo + remote, read PIN, VIN Edition 7.LAND ROVER (EWSх) to immo 9S12, editing VIN 8.NISSAN (NATS) at 95,080 immo 9.OPEL (CIM) in the 9S12 immo + remote, read PIN, VIN Edition 10.RENAULT (UCH) on 93C66 immo + remote, read PIN, VIN Edition 11.SAAB (CIM) for the 93LC66 immo + pilot edition of the VIN Features: 1. Latest versions of HiTag2 transponders are fully supported. 2. Widest range of supported cars, using HiTag2 protocol. 3. Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality! 4. Correct BMW keys programming – RADIO REMOTE is working. If you want to know more about BMW key programmer,you can visit our online shop uobdii.com auto key programmer UOBDII All rights reserved Which BMW  key programmer do I know

[diyobd2]

Xprog Box vs Xprog-M vs Xprog T vs Xprog

XPROG is an universal car ECU Programmer,supports more than 500 units, and the latest XPROG box 5.76 supports CAS4 5M48H and new adds other authorization, including: serial EEPROM's, Microcontrollers (MCU), Electronics Control Units (ECU), DashBoards, Immobilizers, Calculators and others).

XPROG -->  XPROG-T -->  Xprog-M -->  XPROG BOX

Xprog turns into Xprog-T when using BDM.exe and supports HC912B32 and HC912D60 ONLY .... so that's what makes Xprog as Xprog-T

Xprog and Xprog-T are same when using "Device Programmer Desktop" soft...

Xprog-M is designed to replace the earlier version of XPROG programmer.

Xprog-M programmer is fully upward-compatible hardware with XPROG programmer and have many additional features.

The Xprog-M supports in-circuit or on-board programming of Motorola 68HC05, 68HC08, 68HC11, 68HC(S)12 , HC912, MC9S12, MC9S12X , Texas Instruments TMS370 , MPC5xx, ST10Fxx, ATmega family MCU's and serial EEPROM's.

Xprog-box is newer and it supports more units than older Xprog-M.

So, about XPROG programmers, which one do you need?

There are mainly four versions available in the market, differs from software functions (that is, chips authorizations). Here you go.

1: 2014 Version --  V5.00

2: 2015 Version --  V5.55

3: 2016 Version --  V5.60

4: 2017 Version --  V5.70

5: 06.2017 Version-- V5.76

Xprog box 5.76 adds new authorization:

(the programmer is coming soon)

MCU/MPU->infineon{XC16x}->SAK-XC164CS-16F

MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG

MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG

MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH

MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH

MCU/MPU->Fresscale9S12XD->MC9S12XDx128_EFPROM

MCU/MPU->Fresscale9S12XD->MC9S12XDx128-EFPROM-secured

MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE

MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE

MCU/MPU->Fresscale9S12XHY->MC9S12XHY128_D-FLASH

MCU/MPU->FresscaleMPC55xx->MPC5515_Code-Flash

MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash

MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash

Immobilizers->Yamaxa->T-MAX_TYPE_I_9S12T64

Other ECU ->Chrysler-DodgeJeep->BCM-GRAND_CHEROKEE_WK_2014_Flash

Other ECU ->GM ECU->SAF-XC164CS-16F

Other ECU ->HONDA Bikes->CB650F 2015_Code_Flash

Other ECU ->Renault ClioOther ->EPS_ST10F269

Other ECU ->Renault Modus ->ECU_SAK-XC164CS-32F

Airbag(XC2xxx)->FR3T-14B321-AF(XC2336A-72)->FR3T-14B321-AFflash0

Airbag(SPC560xx)/MPC560x)->Honda_CR-V(SPC560P50LS)->Code_Flash

XPROG-box v5.70 adds new MCU/MPU:

MCU/MPU->infineon{XC16x}->SAK-XC164CS-16F

MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG

MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG

MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH

MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH

MCU/MPU->Fresscale9S12XD->MC9S12XDx128_EFPROM

MCU/MPU->Fresscale9S12XD->MC9S12XDx128-EFPROM-secured

MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE

MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE

MCU/MPU->Fresscale9S12XHY->MC9S12XHY128_D-FLASH

MCU/MPU->FresscaleMPC55xx->MPC5515_Code-Flash

MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash

MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash

Immobilizers->Yamaxa->T-MAX_TYPE_I_9S12T64

Other ECU ->Chrysler-DodgeJeep->BCM-GRAND_CHEROKEE_WK_2014_Flash

Other ECU ->GM ECU->SAF-XC164CS-16F

Other ECU ->HONDA Bikes->CB650F 2015_Code_Flash

Other ECU ->Renault ClioOther ->EPS_ST10F269

Other ECU ->Renault Modus ->ECU_SAK-XC164CS-32F

Airbag(XC2xxx)->FR3T-14B321-AF(XC2336A-72)->FR3T-14B321-AFflash0

Airbag(SPC560xx)/MPC560x)->Honda_CR-V(SPC560P50LS)->Code_Flash

XPROG-box v5.60 addsnew EEPROM / MCU/ECU:

9S12XEP768 P-FLASH, D-FLASH, EEPROM (AUTH-0024-2) 9S12XET256 SECURITY P-FLASH, D-FLASH, EEPROM (AUTH-0024-3) 9S12XEQ384 SECURITY P-FLASH, D-FLASH, EEPROM (AUTH-0024-3) 9S12XEP768 SECURITY P-FLASH, D-FLASH, EEPROM (AUTH-0024-3) 9S12XEP100 SECURITY P-FLASH, D-FLASH, EEPROM (AUTH-0024-3) XC2361A-56 FLASH3  (AUTH-0023-2) MC9S12XDP512 0M23S MAC7241 write bug fixed (AUTH-0023-1)....

Xprog-m 5.5 adds ic device list:

MCU/MPU  SPC560 serial

SPC560P44Lx_Code_Flash SPC560P44Lx_Code_Flash_Test SPC560P44Lx_Code_Flash_Shadow SPC560P44Lx_Data_Flash SPC560P44Lx_Code_Flash_Block SPC560P50Lx_Code_Flash SPC560P50Lx_Code_Flash_Test SPC560P50Lx_Code_Flash_Shadow SPC560P50Lx_Code_Flash SPC560P50Lx_Code_Flash_Block

Freescale MPC5xx

MPC MPC->Configuration-A MPC->Configuration-B MPC->External Flash MPC->External EEPROM M95xxx

MCU/MPU

Freescale 9s12XHY

MC9S12XHY256 D-Flash MC9S12XHY256 P-Flash

Freescale (Mac7xxx)

MAC7111VAG50_Flash MAC7111VAG50_Data_Flash MAC7112VAG50_Flash MAC7112VAG50_Data_Flash MAC7116VAG50_Flash MAC7116VAG50_Data_Flash MAC7131MVF_Flash MAC7131MVF_Data_Flash MAC7241VAF64_Flash MAC7241VAF64_Shadow_Flash MAC7242VAF64_Flash

Freescale 9S12XS-secured MC9S12XS128_D-Flash-Secured MC9S12XS128_P-Flash-Secured

Xprog m 5.55 has additional function:

AUTH-0025 Authorized 11/4/2014

Xprog m 5.50 adds new chips:

AUTH-0023-1 MAC7xxx AUTH-0023-2 XC23xx AUTH-0024-1 MC9S12Cxx AUTH-0024-2 MC9S12XE AUTH-0024-3 9S12XE SECURITY AUTH-0024-4 MC9S12HA/HY/P

So, the Xprog box 5.70 authorizations includes:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM) AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM) AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory) AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM) AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory) AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state. AUTH-0008 BMW EWS3 authorization AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory) AUTH-0010 MB ZGS001 authorization AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory) AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory) AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash) AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size) AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory) AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM) AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code). AUTH-0023-1 MAC7xxx AUTH-0023-2 XC23xx AUTH-0024-1 MC9S12Cxx AUTH-0024-2 MC9S12XE AUTH-0024-3 9S12XE SECURITY AUTH-0024-4 MC9S12HA/HY/P AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014

Here is what’s new in Xprog box 5.7.0.

Xprog 5.70 adapters:

ADP-0001 TMS370 PLCC28 programming adapter ADP-0002 TMS370 PLCC44 programming adapter ADP-0003 TMS370 PLCC68 programming adapter ADP-0004 Motorola HC05B/X PLCC52 programming adapter ADP-0005 Motorola HC05B/X QFP64 programming adapter ADP-0006 ST M35080 in-circuit programming adapter ADP-0008 TMS374 family in-circuit programming adapter ADP-0009 MC68HC05V12 programming adapter ADP-0010 TMS374 on-board programming adapter ADP-0011 HC11EA9/E9 programming adapter ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter Additional adaptor for 5M48H P-Flash

The most important note-

Xprog-M is better than UPA-USB but UPA-USB is better for money.

UPA-USB is thebest,safest,cheapest way of reprogramming Motorola/freescale PCUs.