#Bending plate

[himalayamachine]

Buying a Plate Bending Machine? Gain the Himalaya Advantage

When it comes to workshop machines, one of the versatile machines is a Plate Bending (Rolling) machine. It can do various jobs over and above circular shells when used suitably. Its ability to bend any workpiece is important in many industries. Most of the customers use a Bending / Rolling machine to make Circular bending jobs, Conical bending, and various other jobs. Compared to other machine tools, it exhibits quite an extended working life.

How do Rolling/Bending Machines Work?

Permanently changing the workpiece into a certain shape is called bending. Steel is elastic under normal circumstances. It means that it is subjected to deformity under load, but upon removal of load, it regains the original shape. However, this is true only up to a certain extent of deformation. Beyond a certain level, the material cannot regain its original shape. However, after the load is removed, it does spring back a little.

The plate is deformed (bent) due to the roll’s force (see below figures) –

The deformation should be sufficient to develop stress in the plate material higher than the plate’s yield point. In simple words, it can be said that yield point is the stress at which a material bends or elongates, while Ultimate Tensile Strength is the stress at which the material breaks into two pieces.

Suppose the rolls are now given a rotary motion. In that case, a continuous bending process results, which is called Rolling (refer below figure) –

It can be seen that a certain end portion of the plate has not passed under the top roll and remains almost straight, and to reduce that pre-pinching feature is provided.

With the rotation movement and position change of work rolls with different shapes, the plate bending machine is capable of processing oval, arc, and cylindrical parts. Upon the proper adjustment of the relative distance between the lower and upper rollers, users can bend the plate to any value. However, it must be remembered that the lower roller’s radius must not be less than the radius of the upper roller.

The bending roll process is a deformation operation, which can make the plate have a certain curvature. It has the function of rolling O-shaped, U-shaped and multi-stage R-shaped plates. With a Plate rolling, you can manufacture a wide range of different products. Typically, all steel or metal forming for cylindrical lines use bending rollers for rolling.

How to Use a Bending Machine?

Step-1: From the wall-mounted isolator switch, you have to switch on the main supply to the machine. After this, you will see a ‘power on’ indicator light up. If the phase sequence is not ‘OK,’ or in case of any fault with the incoming power supply, such as phase failure, under voltage and overvoltage, or unbalanced voltage, the single phasing preventer will not allow the ‘control on’ indication on the operating console. However, the ‘control on’ indication will automatically light up when the incoming power supply is okay.

Step-2: Switch on the Hydraulic Pump Motor and allow it to run idle for a minute or so.

Step-3: Amidst the idle run of the Hydraulic Pump Motor run, monitor the direction of rotation of the main pump motor and run the cooling fan motor of the oil cooler. They must be in the direction of the arrow indicated on it.

Step-4: You can now try other operations like UP, DOWN, REVERSE & FORWARD etc., at no load.

This idle run spreads the lubricants on the working gear trains and bearing journals. Then, if everything appears fine, you can begin the bending work.

Now that you have a better understanding of the functioning of bending machines, it is recommended that you take a closer look at which options your needs are met. Always look into factors like bending force, length, table height and breadth. Considering these factors will help you determine the efficiency of the machine. To solve your woes, Himalaya Machinery is here with its powerful range of machines. Let us see some of the basic features of the machines.

Features of Himalaya Bending Machine

Sturdy Steel Structure

Himalaya machines exhibit a strong steel structure made up of heavy metal plates. A strong box design chassis connects the frames. The frames have interlocks and strengthening ribs. The roll guideways are machined together utilizing a fixed single reference point which allows for parallelism of all axes and precise surfaces, as well as longevity and precision of the critical characteristics of the machine.

Rolls

Himalaya designs the rolls with the optimal diameter and uses forged carbon steel rolls machined by high-precision CNC lathes. Our rolls have a spline-based design that is extremely efficient in connecting the rolls with planetary gear systems. This diminishes points of roll failure compared to welded connections.

Crowning

All the rolls manufactured by our company are crowned to compensate for roll deflection during the bending process. While ordering, users can select custom crown-machined rolls for different materials or thicknesses.

Hydraulic System

In all our machines, we ensure additional energy saving with the help of a hydraulic system that can work at less than full capacity when jobs with less than maximum thickness are rolled. The twin-speed operation also reduces energy consumption by up to 50% when a slower operating speed is selected. The Himalaya Planetary driving system ™ used in the machines is efficient and eliminates energy wastage associated with heavy-transmission systems and yet achieves the goal of speed reduction by increasing the stages in gears and pinions.

Why Choose Himalaya Plate Bending Machines?

Himalaya Machinery is a 40-year-old company that has supplied over 2500+ plate bending machines to customers across India and abroad. Let us see why:

Better Accuracy: All our machines are designed and manufactured with proven superior Linear Guideway (bottom rolls positively guided without any linkages) Design (like HAEUSLER) for Plate Bending machines. As a result, the machine does an accurate bending / rolling job.

3-Year Warranty: We offer a 3-year warranty that demonstrates the performance; thus, the reliability of our machines at a nominal cost.

400+ Clients Across the Globe: More than 400 customers have already placed repeat orders on Himalaya Machinery. Some names are market leaders like Thermax, Tatas, Godrej, Reliance, etc.

Operator-Friendly & Minimum Maintenance: Himalaya’s Machines are robust and convenient to maintain. Also, there are quite operator-friendly machines and therefore a preferred choice among many.

Top-Notch Customer Support: Himalaya is known for its exceptional customer service support — the USP of purchasing the company’s wide range of plate bending machines. Our technicians reside in major cities of India. So they are readily available in case of any issues with the machine.

Trusted Brand: The machines by Himalaya come with a high resale value, are quite high in demand, and get resold almost immediately. Some of our valued clients in India are government organizations such as Railways, Defence, Steel Plants, Refineries, Fertilizer Plants, Atomic Energy plants, Shipyards, BARC, BHEL, HAL, BEML, NTPC, etc.

Four decades of excellence: The company supplied its first machine 4 decades ago, which is still functional, speaking volumes about the brand’s credibility. We’ve never accepted anything below excellence and never will.

More than 2500+ operational machines: Himalaya Machinery has manufactured over 2500 bending machines, all in operation today. We believe in quality, and the numbers are a testament to it.

Are you looking for a reliable manufacturer of bending machines? Then, Himalaya Machinery is your answer! Schedule a free consultation with our experienced team to walk you through the process of buying a plate bending machine.

Learn more about our 3 Roll Plate Bending Machines and 4 Roll Plate Bending Machines.

Original Source : https://www.himalayamachine.com/post/why-buy-himalaya-plate-bending-machine

[reginaldubel]

godziller i designed a year ago

(quality might suck cause its huge)

[uwmspeccoll]

Decorative Sunday

GEE’S BEND QUILTS

Since the 19th century, the women of Gee’s Bend in southern Alabama have created stunning, vibrant quilts. In 2002, folk art collector, historian, and curator William Arnett organized an exhibition entitled "The Quilts of Gee's Bend," which debuted at the Museum of Fine Arts in Houston and later travelled to a dozen other locations across the country, including our own Milwaukee Art Museum (September 27, 2003 - January 4, 2004). This exhibition brought fame to the quilts, and Arnett's foundation Souls Grown Deep Foundation continues to collect and organize exhibitions for Gee’s Bend Quilts.

The images shown here are from Gee’s Bend: The Women and Their Quilts, with essays by John Beardsley, William Arnett, Paul Arnett, and Jane Livingston, an introduction by Alvia Wardlaw, and a foreword by Peter Marzio. The book was published in 2002 by Tinwood Books, Atlanta, and published in conjunction with the 2002 exhibition at the Museum of Fine Arts, Houston. It includes 350 color illustrations and 30 black-and-white illustrations. The dust jacket notes observe:

The women of Gee’s Bend - a small, remote, black community in Alabama - have created hundreds of quilt masterpieces dating from the early twentieth century to the present. . . . [The] quilts carry forward an old and proud tradition of textiles made for home and family. They represent only a part of the rich body of African American quilts. But they are in a league by themselves. Few other places can boast the extent of Gee’s Bends’s artistic achievement, the result of geographical isolation and an unusual degree of cultural continuity. In few places elsewhere have works been found by three and sometimes four generations of women of the same family, or works that bear witness to visual conversations among community quilting groups and lineages.

Our copy is a gift from our friend and benefactor Suzy Ettinger.

View more Black History Month posts.

View more Decorative Sunday posts.

[uas-art]

My sewing machine broke recently so I've been hand mending things.

Process

[shepscapades]

So, um, basing on what is the result of smashing an androids head open is in dbh, uhhhh. gg etho rest in peace :|

Yeah mans is not doing well. Etho needed a LOT of physical repairs after this incident, and that’s not even taking into account the programming/internal errors that caused it in the first place. Doc and Xisuma spend a LONG time trying to fix him before they eventually deem his programming unsalvageable and reset him.

[billford-dump]

The plate in Ford's skull is powerful. Absurdly so. But that power mostly comes from how specific it is.

Every ward and symbol etched into it, every enchantment, every single aspect of its design down to the molecular structure of whatever alien metal it's made of, it's all meant to ward off Bill's influence. To disrupt a deal giving Bill full and unconditional access to Ford's mind and body.

It's powerful to the point that even though it's designed to only keep Bill out of his head, it also happens to keep out most other types of mental influence. Even the ones that can get past the plate are usually so weak from the effort that by the time they reach Ford's mind he can fight them off on his own.

And it still doesn't keep Bill out of Ford's dreams, because the world of dreams isn't a place you can reach from within the safety of your own skull.

[cavityinmybrain]

this might be a shot in the dark, but do any spoonies who deal with hypermobility know any good tips for stabilizing joints?

the issue im currently having is with my thumb when i do dishes, holding dishes for an extended amount of time makes my thumb joint hurt extremely painfully and im not sure what to do about it. i have KT tape so i might try that bc i wear gloves while i wash dishes anyways, but i just dont know what to do to prevent this pain.

[heraldrydiculous]

#411 Heraldry-licious!

[blood-injections]

What is it with so many zombie movies and not having armor like. Wear a leather or denim jacket at the least. Not even a zombies sinking its teeth into your flesh through that. I mean have armor anyway just to be safe especially something on your forearms like. So many people in movies go out because they raise their arm to block the thing from going for heir face and surprise. You got bit because you blocked like a smart person but weren't wearing armor like one. It would literally have taken ten minutes to change your fate. You dont need like a suit of armor its an apocalypse you need to be able to move armor would weigh you down bla bla bla. No! First of all you're probably carrying around a bigass pack of supplies, armor isnt going to weigh you down any more than that. Also the armor is like. Wouldnt be a heavy suit of armor like i said. Literally just pad yourself with extra fabric ducttape shit to yourself. Or be cool and collect like aluminum cans and license plates, thin, light metal that you can bend around your arms so next time you block with your arm you'll actually be protected. Thin, light, strong metal that you can tape and wrap all over yourself and it won't weigh you down. Might not withstand bullets but you won't get bit

[slippery-minghus]

hmm. had an actual conversation with nightmare coworker today that seemed mutually productive. she apologized for saying some bullshit that hurt my feelings and i clarified that my intentions are to help not to undermine her, and we both agreed that there's no competition against each other and that it's the lack of growth in our role that's the problem. it was...productive.

and further cementing for me that it is time to begin making my Exit. i will be sending out my resume to a few places this weekend.

i'm still processing the conversation, and am struggling to place myself in where i am responsible to better my behavior. because i genuinely don't want to be an ass, even though i really don't like this lady and will jump for joy the day i never have to see her again. she stated that she knows my intentions aren't to hurt her, and that she thinks i'm very kind. i apologized for if my behavior came off as undermining her, and said that my intentions are only to better my own growth—and that i know she's trying to succeed too. i validated her feelings, and complemented the effort she is putting in.

where i'm struggling with is: am i in the wrong/causing harm and needing to change if the issue is that her feelings are incongruent with what she knows of my intentions? her feelings are her responsibility (WOW i almost typed "her feelings are my responsibility". i feel like that's a freudian slip) and she states that she knows i don't mean to hurt her. i'm going to try to be more clear in wording my intentions with her (she feels like me trying to take work off her plate is to undermine her. when really, i'm caught up and see her getting overwhelmed, and i want to help and also have something to do since i'm bored).

but i'm really struggling to look at my role in this and pass judgement on myself. i can and want to do better, and i don't think i did anything wrong, but i'm always so hesitant to say it's not my fault or i didn't do something bad. like i can't trust my judgement on that. my intentions were good, her bad feelings are ones caused by her insecurities, which she more or less has expressed to be aware that they are not true—the hurtful thing she said to me, she acknowledged was said out of hurt and not what she actually thinks. so, is it fair to say i'm not the bad guy? i'm not in the wrong? i know good intentions that still result in harm don't absolve anyone, but when the things that are clashing are insufficient communication and reactive insecurities... i'm not a monster, am i?

[galionne-speeding]

started thinking about how D.U.F.U.S. works on a technological level and now i'm coming up with headcanons at speeds not yet known to man

[rodismancave]

Need to see ‘im faceplant more times

[pedestrianversee]

people in the death cab for cutie tag on here really do sleep on every single death cab song thats not i will follow you into the dark

[discountalien-pancake]

Sometimes i see a piece of art and i just wanna ask the artist,

are you aware that plate armor is not flexible?

[thecoffeelorian]

AIN'T NO PARTY LIKE A MORIA PARTY, LET'S FOOKIN GO!

[himalayamachine]

Learn how plate bending machines enhance accuracy, speed up projects, and improve overall construction quality.

For more information visit: https://www.himalayamachine.com/