#90mm round bar

[triroundbars]

How do you calculate weight of round bar?

Weight of MS round bar calculator and its formula | weight of round bar | weight of round bar calculator | weight of round bar formula | weight calculation formula for round bar | how to calculate round bar weight | unit weight for round bar | weight calculation formula for the round bar.

There are many uses for round bars, such as shafts, frameworks, supports, brushes, axles, rollers, foundations, anchor bolts, pins, etc. It has many applications and has a great deal of significance in engineering. In addition to hot-rolled steel and cold-rolled steel, round bars are available in aluminum, stainless steel, mild steel, and more.

The round bar of mild steel/MS is a highly malleable, highly versatile metal that is suitable for many commercial and industrial applications. It is commonly referred to as Carbon Steel because it contains a low amount of carbon, which is why it is known as Low Carbon Steel. As far as the carbon content is concerned, it varies from 0.05% to 0.25% by weight.

Our article discusses the weight of a round bar calculator and its formula for different sizes of MS bars, such as 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 45mm, 50mm, 60mm, 65mm, 75mm, 90mm, 100mm. There are three different formulas used to measure their weight: kilogram per meter (kg/m), kilogram per foot (kg/ft), and pound per foot (lb/ft).

Weight of  round bar calculator and its formula

It is used to calculate the weight of different sizes of MS round bars, such as 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 45mm, 50mm, 60mm, 65mm, 75mm, 90mm, 100mm, by multiplying volume and density.

The volume of the round tube is equal to the product of the circumference of the pipe, divided by the height of the pipe.

The weight of an m3 is given by πD^2/4.H × 7850kg/m3.

A number of formulas are used to calculate the weight of MS round bars since it is the most important construction material widely used in industrial and commercial projects. In order to find out the formula for the weight of the round bar for the MS bar, people want to know the formula for the weight of the round bar and try to find it out on their own.

The Unit Weight of a round bar is defined as a ratio of Unit Weight to its volume, measured in kg/m3, so if 1 cubic meter of MS round bar weighs 7850kg, then the unit weight of the round bar in cubic meters is 7850kg/m3. 

For More Information Visit

#aluminum #copper #metalart #metalwork #iron #engineering #welding #fabrication #metal #steel 

[drfroebindia]

What are benefits of Burger Patty Making Machine in the food industry?

Patty forming machine, also known as burger patty machine, offers many benefits in the food industry, especially in burger production:

1. Efficiency: Patty forming machines are designed to streamline the burger patty production process, significantly increase productivity and reduce labor costs. These machines can produce large numbers of patties in a short period of time, ensuring fast and efficient production.

2. Consistency: One of the main benefits of using a patty making machine is that it ensures consistent patty size and weight. This is important for businesses that strive to maintain uniformity across their products to ensure customer satisfaction and efficient segmentation.

3. Food Safety: Patty making machines adopt hygienic practices, reducing the risk of contamination and ensuring food safety. These machines are made from food-grade materials and are easy to clean and sanitize, reducing the chance of cross-contamination.

4. Versatility: Many patty making machines offer adjustable settings, allowing businesses to produce patties of different shapes, sizes and thicknesses. This versatility is beneficial to businesses that offer a wide range of burger options and customization to meet different customer preferences.

5. Time Saving: Manual patty making can be a time-consuming task. Patty making machines automate the process, reducing the time and effort required to manually shape patties. This enables businesses to increase production capacity and meet higher demand.

6. Cost-effective: Investing in a patty making machine can be cost-effective in the long run. With increased production and lower labor costs, businesses can achieve higher profitability.

At a glance on main benefits

Easy to use and Clean

High standard yield without loose parts

Food grade stainless steel is used

Work efficiently with minimal noise.

Easy to operate, maintain and clean

Suitable for the processing of a wide range of products

Easily adjustable

Online technical support

Fast assembly/disassemble, enables easy cleaning

Efficient operation saves labor cost

HACCP and CE authorization ensure operation safety

We have written some features of Burger Patty making Machine

Structure in stainless steel and anodized aluminium.

Exchangeable cylinder made in Delrin®, one or two shapes. Provided with a standard forming cylinder and a scraper.

Certified materials for food contact.

Standard conveyor belt

Portion thickness is easy to adjust.

Constant weight.

Safe! Codified magnetic micro-switches and safety guards to prevent access to moving parts.

Paddles, forming a cylinder, and product feed hopper easy removable for cleaning and maintaining.

User-friendly transparent methacrylate window and cover.

Electric plant in ip55 box.

Maximum Security! Our hamburger making machine is equipped with all the useful equipment to enhance the safety level; The glass panel covers all the moving parts and gives maximum visibility of the process.

The stainless steel tank is completely removable to facilitate cleaning. All components that come into contact with meat or other mixtures are approved for use with foods in compliance with the HACCP process. if you want to know the burger patty machine price click on the given link and send an enquiry.

Dimensions and Technical Details            

Feed pan capacity           23ltr  

Productivity                       2100 pcs/h 

Voltage                               V230 / 1 / 50Hz

Single Phase Motor         0.65 (0.9) kW (HP)

Shape Ø                             Max 120mm

Configuration   Standard   Configuration (no cylinders or other accessories included)

PFA   Special   automatic scraper device (pneumatic system needed compressed air min 4 bar; instead of the standard manual system)

Cylinder Delrin cylinder   hamburger shape (round shape) Ø 90mm

Net Weight       50 kg

Options of hamburger forming machine:

a) Burger Shape Drum

Size: Burger shape Ø 90 mm or Ø 100 mm or Ø 110 mm or Ø 120 mm

b) Meat Ball Drum

Size: 38mm

c) Customized Drum

d) Foot Control

e) Paper Interlever

f) Extended Conveyor

g) 40 Litre Hopper

h) Automatic Scrapper

i) Variable Speed

Overall, patty making machines offer efficiency, consistency, food safety, versatility, and time-saving benefits. These machines are valuable equipment for businesses in the food industry, especially burger production.

[wheelsgoroundincircles]

1963 Chevrolet Classic Sedan 4D

Professionally built by Jim Hallowell this checks all the boxes of sex appeal , driveability and animal horsepower. The car can be driven anywhere , has been a best of 8.30's with mild tune and much more left. Also included are the Weld Wheels shown in the track pictures, front and rear , mounted with tires ready to go. Chute and Kirkey Seats with window net It features: -370” SBC -Jeffco 4 speed transmission -Browell 7.5” SFI Bell Housing -Black Magic twin disc 11.5” adjustable clutch -American power train hydraulic clutch set up -Lokar Billet gas pedal -All new or restored stainless and aluminum body trim -Mowtown aftermarket block -Billet steel splayed main caps -Billet Callie’s crank -Billet Molinar rods -Blower pistons -Custom ground Comp Cam -Twin Borg Warner 75mm turbos with Billet Wheel upgrade and Front bell upgrade. -Dual Precision 45mm wastegates -Procharger “Big Red” blow off valve -Custom Stainless headers -Custom cold side 4” aluminum intake system -Custom 8.50 certified roll cage with swing out door bars -Custom round tube front end -Strange single adjustable front struts -Wilwood Foxbody front brakes -Wilwood rear brakes -Ford 9” with back brace -Strange 40 spline gun drilled axles -Moser aluminum through bolt Third member with 10 bolt pinion support 3.42 gear. -Smith Racecraft 1”drop perches for the housing. -Smith Racecraft Assassin Bar reaction device -Afco Big Gun 3870BG double adjustable rear shocks -Custom TRZ anti roll bar -Ported Edelbrock “Shaver” heads -Edelbrock Victor Jr intake -90mm Accufab throttle body -160lb injectors -Weldon 2345A fuel pump -Weldon fuel regulator -Weldon electronic fuel pump regulator. -Billet MSD distributor -MSD 7531 digital 7 ignition box -MSD HVC2 pro power coil -Fast XFI 2.0 fuel management system -Racepak IQ3 Street dash -AMS 500 boost controller -American Auto Wire Highway 22 fuse panel -Ididit tilt column -Original style interior -Custom aluminum valve covers -2000hp Chiseled Performance intercooler -7 gallon Chiseled Performance water tank with pump -Wheel Vintiques custom offset steel wheels with Copo style dog dish caps, M&H Racemaster fronts and Mickey Thompson 275-60-15 radials in back -Stroud 430 pro stock parachute -Afco Dual pass L/S style radiator -The wiring is all new and custom

[afstar]

What are the sizes of round bars? | AFStar

Stainless steel is low-carbon steel, often known as an iron alloy, that contains at least 50% volume of iron and at least 10% by weight of chromium. Stainless steel does not easily corrode, rust, or stain with water as regular steel does, and the chromium gives it great corrosion resistance for a specific use or context.

The SS round bar is one of the most significant players in the machining sector. Stainless steel round bars are employed in industrial sectors that produce machinery and fasteners with the outstanding property of corrosion resistance.

In India, there are several sizes/diameters of steel used in construction, including 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 45mm, and 50mm; higher sizes/diameters, such as 60mm, 75mm, 90mm, and 100mm, are made to order and sold by different steel companies. There are other 5 mm steel bars available, but these are not used for structural work because they are too thin; they resemble pencils.

Steel bars of varying sizes and diameters are used in construction components such as columns, beams, and slabs by the design structure, the span between the column, and the weight applied to it.

Steel bar sizes used in building

Steel bars come in sizes 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 45mm, 50mm, 60mm, and so forth. Higher size steel bars like 75mm, 90mm, and 100mm are also custom-made by different steel companies based on customer needs.

Steel bar sizes in the slab

Slabs typically use steel bars with a size/diameter of 8mm, 10mm, and 12mm.

Size of steel bars for beams and columns

The size of the steel bar needed for the column and beam depends on the structure's design, the load placed on it, and the distance between the two supports. However, beams and columns need steel bars with a size of 12 mm to 25 mm. Steel bars in the 32mm size or diameter can also be offered on occasion for raft foundations.

One of the leading brands in the production of high-quality and superior round bars, AF Star provides round wires in various sizes. If you are looking for round bars for your construction, trust the reliable and strong round bars from AF Star. 

[helpfullarticle]

Elf Bar Disposable Vape Review

Disposable e-cigarettes make it easy to switch to vaping. The disposable vapes are easy to use and require little maintenance. They also come prefilled with juice, so you don't need to worry about refilling them. You can toss them out once they run out of juice. Draw-activated disposable vapes are easy to use. You can vape by simply inhaling through the mouthpiece.

The elf bar flavours 600 Disposable Pod Device is your best new pocket companion to help you STOP smoking and comes in a range of tasty flavours. Meanwhile, it supports about 600 puffs with the large 550mAh built-in battery and 2ml pod pre-refilled with juice. And the Elf Bar 600 Disposable Pod has 2% Nicotine strength for a faster and more satisfying nicotine hit.

One such disposable vape is the Elf Bar. Each Elf Bar is prefilled with 1.4ml 5% (50mg) strength nicotine salt juice. Elf Bars come in 8 flavors and are compact and colorful. Each one should last for 300 puffs, according to the description.

Elf Bar's disposables are made entirely from plastic. It has a nice look and almost looks like a toy. (But, after thinking about it, it's not a great thing). The shell has a transparent outer surface and an inner colored body. Each Elf Bar's transparent outer plastic shell gives it a shiny, appealing appearance. Each Elf bar is customized with the flavor. This is not a discreet disposable, considering how bright the colors look.

Each Elf Bar is brightly colored and has a bright LED that lights up when it's time to puff. The transparent outer shell glows around the device's bottom like a ring. You can use it as a flashlight when you are in darkness. Is it safe to vape in public at night? Yes, people will notice.

Each Elf Bar measures 90mm high, 20mm wide, and 13mm thick. Although shorter than most disposables of the rectangle shape, they are slightly thicker.

These are easy to use because they have a round shape with a slimmer mouthpiece. They are portable and easy to carry. I have taken them with me everywhere I go. 8 Elf Bars fit in my sweater pocket and were lightweight. Although it was a bit excessive to carry all 8, it's still possible.

[idweb]

Naomi Especificaciones & recomendaciones

Descripción: servilletero Dimensiones: 100mm x 90mm x 50mm apróx. Peso: 100g aprox. Materiales: barra metálica de 6mm Colores y/o acabado: recubrimiento electroestático. Proceso: doblado hecho a mano.

Specifications & recommendations

Design: Mayra A. Briceño. Description: napkinholder Size: 100mm x 90mm x 50mm aprox. Weight: 100g aprox. Materials: 6mm round steel bar Colors and/or finishes: electrostatic coating. Process: handcrafted bent bar 

home

[leyuangroup]

China Industrial Magnetic Filters & Separators Manufacturer

https://www.leyuangroup.com/products/magnetic-filter/

Food-grade magnetic particle separators are massively advanced when compared to traditional applications of magnets to remove ferrous particles. According to the function of the magnetite filter, it also includes magnetic tubes, magnetic grates, magnetic boiler filters, magnetic drawers, and magnetic traps.

 As one of the leading magnetic products manufacturer in China, Leyuan offers a magnetic filtration system manufactured in strict accordance with food safety standards for applications with demanding customers. Strong magnetic fields can remove nano-level ferromagnetic contaminants. These magnetically separated products are equipped with a high-intensity magnetic separator that can withstand over 13000Gs of magnetic force, and so they are widely used in magnetic separation, inline magnets for food processing, pharmaceutical processing, and oil and gas industries. Design and custom types of industrial magnetic separators for different industries. Contact us to get more about magnetic filter & separator price now!

 Types of Magnetic Filter & Separators For Sale

Magnetic Tube

Magnetic Tubes remove iron contaminants to purify the material and protect the equipment. Our magnetic bar is TIG welded, sealed and fully waterproof. After 4 polishing procedures, the surface roughness reaches RA0.6 which fully meets the requirements of food and pharmaceutical production.

 Magnetic Grid

Strong permanent magnetic grid, has 3-6 times stronger than ferrite magnets. It provides more than 13000G strong magnetic force separates fine ferromagnetic impurity particles, the product can be easily installed in the cone, square, round or irregular shape hoppers.

 Magnetic Drawer

Magnetic drawers are made from magnetic grates in a 304L or 316L stainless steel casing. As one kind of popular magnetic separator, drawer magnets effectively separate ferrous particles. The magnetic field intensity of magnetic drawers is over 13000GS and so is applicable to all types of powder industries.

 Magnetic Trap

LEYUAN permanent magnet magnetic traps, equipped with super-strong magnetic bars, are used to protect pipe lines and processing equipment. The magnetic trap adsorbs ferromagnetic dirt, rust and fine iron pollutants in the pipeline through magnetic force to ensure product purification.

 Magnetic Boiler Filter

As a magnetic central heating filter bars manufacturer, we produce 20-50 thousands magnetic bars every year, which are used in central heating magnetic filtration system. Diameter: 10mm, 15mm, 22mm, 25mm, or customized as your request, Length: 90mm-2000mm, or customized as your request.

[jrsafetysupplie]

Find Safety Bollard at JR Safety Supplies Pty Ltd

J R Safety and Supplies is one of the leading Line Marking Companies in the advancement and implementation of line marking and safety solutions in NSW. We are specialized in the application of all aspects of line marking such as waterborne paint, preformed thermoplastic, audio tactile line marking (ATLM), raised pavement markers (RPM’s) and paint removal in and around NSW. From standard hand operated units to automated thermoplastic equipment, we have the equipment; skill and relevant experience to accommodate any size project. We also provide a full range of car park fixtures and rubber wheel stops, speed humps, height  bars, bollards, convex mirrors and lane markers.          

We manufacture a range of bollards and each range comes in: ‘base plated’ (for bolting onto hard surfaces), ‘in-ground’ (for core drilling into concrete, asphalt, road base & dirt) and ‘removable’ (for providing access when required by being able to be removed easily when required).

Standard sizes are: 90mm & 165mm in round steel & 100mm square tube. Bollards are designed to offer visual and physical protection in carparks and industrial settings. We can also manufacture a range of custom sizes on request.

The bollards are hot dipped galvanized after manufacture and powder coated in a range of colors. The steel cap can be removed to fill the bollard with concrete if required.

 Installing bollards at your store up is for all time a good proposal because you can’t put safety on the back burner. Still insecure which bollard would be exact for you and your industry?

CALL NOW FOR ON-SITE MEASURE AND QUOTE

[sere22world]

What to do if the door lock wo n’t open

I believe that many people have encountered the situation where the door of the house is locked in their lives. It is too expensive to call a lock-unlocking company. So what is the reason why the door cannot be opened? Let ’s take a look at my analysis.

stainless steel handle lock manufacturers suggest.

First, it is because the safety latch button inside the door is loose. When the door is closed with too much force, the safety latch is shaken. The lock cylinder can be turned with the original key, but the door cannot be opened.

2. Some people, because someone was at home and there was something at the door, first lifted the safety bolt, and forgot it for a while; when they closed the door hard, the oblique tongue of the lock forcibly closed the door without contraction.

Third, it is that there are sensible children and elderly people with Alzheimer's at home, accidentally put the safety plug on at home, and it will not open the safety plug to cause people outside to unlock it with the key. Open the door.

The above situation occurs in several types of anti-theft doors, including ordinary three-segment split locks (three safety door locks) and automatic door locks (self-closing locks) and AB card bar mortise door locks. The method is for your reference.

The door lock of the three insurance splits is covered with a safety bolt and the door cannot be opened with a key. Solution:

There are two types of safety bolt buttons on the lock box inside the door of the insurance security door: one is a twist-type button, and the other is a push-up button. The latter method can only deal with button-type insurance.

The above method can handle this type of failure lock with a safety bolt up to more than 90%. Another stupid method is to use an electric drill, and use an electric drill on the door to drill a circle of eyes on the lock box. Then, you can use the drill to pry it big, you can directly see the insurance mechanism baffle inside, and then use a screwdriver to move the insurance piece, or you can install a special part for the iron door on the front of the electric drill. The round multi-tooth drill clamp for the installation of the lock clamp hole is drilled through the hole of the door lock and projects directly into the lock box on the back of the door. After drilling into a large hole, it is easy to move. Steel plate of safety bolt.

If the door has been locked inside, the door is narrow, and the above method does not work, you can use the lock puller to pull out the lock first; after pulling out the lock, you can pass through the door through the door. The hole where the lock is installed sees the lock box. There is a hole on the lock box where you can insert the flat square rotating pin of the lock. This hole is not large. It is flat and then you can use a homemade 7-shaped steel wire. Line to make, flatten with a hammer in front of your head, and then use a file to modify it). When making this tool, you can find an old lock box to try it out, and you can find it more accurately in practice Position of the safety piece. At this time, you can insert the tool from this hole to pull the safety piece inside the lock box. As long as the safety piece is pulled out, you can open the lock, or you can make another one. The motorcycle wire is made as shown in the picture. The tool is used to turn the bolt. So two of them are stretched together inside, and the toggle is turned while turning the safety plate. Sometimes the safety plate has been activated. Still flicking, some locksmiths have made such tools, Use a flat-head screwdriver to cut off the part in front of the head, and then open a groove. Use an electric drill to connect the eye and connect a section of iron bar to the groove. This iron bar is as large as the concave part on the top. It ’s smaller enough to fit in. Before this iron bar head, punch holes as large as the holes on both sides of the screwdriver groove, and then screw on, or use a wire hammer. The head of the iron bar can be made in advance. Measure the distance just to the position of the lock button's safety button. Use the file to file some small tooth shapes at the position where the safety button is contacted, so as to facilitate the movement of the safety bolt with friction.

The weakest point of the spherical door lock is the connection between the lock tongue and the lock body. When we open the outer cover, the entire lock body will shake. At this time, there is a certain gap at the connection where the 7-head tool can be inserted. The gap is small and difficult to insert, which can flatten the 7-head. The length of the 7-head is preferably 0.7 cm. As long as the pull part of the lock body is pressed by 0.7 cm, the lock can be opened. The material is preferably made of steel wire, and the round body material is easy to rotate.

怎么 How to remove the spherical door lock

First step: first loosen the disc that is close to the door, and twist it counter clock to make it back.

Step 2: Twist the ball (that is, the part holding the hand) a few times, look at the small hole on the top, and insert it with a small object to hold it firmly, so the part you can hold can be pulled. Out.

Step 3: At this time, you can take out the disc that has just been loosened, remove the two screws inside, and then pull it out from the door.

Door lock purchase method

1. When choosing a lock, pay attention to the industry brand. Don't just look at the price one-sidedly, you should choose a large enterprise product with strong scale, stable product quality, and reliability, and buy it from the brand agent's hardware store. It is necessary to identify whether the lock product has a factory name, factory address, trademark, and whether there is a recent inspection qualification report issued by a professional quality inspection agency.

2. The appearance of the lock should be clear, the surface should not be rough, and it should be comfortable. The lock can be opened and rotated flexibly, the locking device should work, and there should be no sense of failure when it feels good, and the security performance is better.

3. When choosing a lock, you must first choose a lock that is consistent with the opening direction of your door. Secondly, pay attention to the width of the door frame. Handle locks are not suitable for doors with a door frame smaller than 90mm. Generally speaking, the door locks are large luxury locks with large panels. Whether the thickness of the door matches the lock is also an important option. To lock the door.

4. The material of the lock should be moderate when buying, and it should be firm and reliable when you feel it. Don't choose all kinds of locks made of low quality and low quality materials. The main materials of the panel and handle are zinc alloy, aluminum, precision cast stainless steel, sheet stainless steel, precision cast copper, and sintered copper. The surface treatment of the panel and the handle mainly includes polishing, sandblasting, wire drawing, electroplating chrome, copper, light gold, PVD, etc. The main material of the lock body is a cold-rolled iron plate or stainless steel in the outer box, stainless steel or copper in the tongue, and other parts of zinc alloy or iron. There are also all stainless steel lock bodies. At present, most of the lock cylinders are made of copper.

[itsworn]

The quickest and fastest 4.6L-powered Terminator on the planet…and probably the cleanest too

For over a century, mining has been an economic cornerstone of Montana; in fact, the state motto, Oro y Plata is Spanish for gold and silver, which refers to two of the precious minerals that gave rise to the state’s’ nickname, The Treasure State.

But we’d argue Montana has been hiding an even greater treasure; a serpent as midnight as obsidian with a heart of silver. Rumor has it the serpent’s onyx coat is so dark and so mesmerizing that countless men have been lost in their reflection—it’s so intriguing you can’t help but stare, but look too long and you too could fall victim.

Montana is known for big skies and open spaces, not wicked-fast cars, but this 2003 Cobra isn’t just putting the Treasure State on the map, it’s rewriting the recipe for success in the 8.5-small tire shootout classes—no big block and no nitrous? No problem.

So clean, yet so mean; you wouldn’t know it, but this 10th Anniversary Cobra makes north of 1,200hp and has been a best of 4.73 at 154 in the eighth-mile.

Once things got serious, an Enterprise Motorsports custom parachute mount and a Stroud parachute were added to slow things down in a hurry.

Never heard of the Midnight Monster from Montana, you soon will…because to the best of our knowledge, this is the quickest 4.6L powered Terminator Cobra on the planet; oh yeah, and it set those records on a small tire, too.

“When the owner, Jack Sucilsky approached us about building a reliable 9-second drag car, we had no idea it would end up where it is today, I just knew whatever state it ended in, it had to be done the AED way,” co-owner of AED and builder of this Cobra, Drew Wallace laughingly said.

In case you were wondering what the AED way is, it’s all-out speed wrapped in understated excellence.

This is the type of car you can’t take your eyes off of. It’s drop dead gorgeous, magnetic and sinister, all in one. You can’t help but stare, but it’s more than lust, deep down you’re scared to look away for fear it might strike—just ask those who’ve lined up against the silent assassin at small-tire events. Look too long and it’s gone!

“People don’t know how to take it, I mean, it has power windows, carpet, stock bodywork, it’s quiet, and the factory paint looks nearly new,” Drew said. In fact, with the hood popped some don’t even know what they’re staring at. “We’ve had people ask us if it’s a Hemi, if it’s something exotic or even something from an import…in reality, it’s just a little 4.6,” Drew said with a smile.

To know the owner, Jack, and the builder, Drew, is to know perfection. Neither would admit it, but their commitment to perfection has no ends, and even in its current state, they’re still searching for more. But before we can look forward, we must take inventory of how we got here; from a bolt-on, auto-swapped 10th Anniversary Cobra that rolled into AED back in 2010 to its currently sinister status.

“Jack wanted something that ran reliable 9s, and after ditching the IRS, adding a TH400 and tuning the positive displacement blower setup, I only drove it to the end of the parking lot before Jack called and said it wasn’t going to be enough, we needed more,” Drew said.

And like that, the hunt for serious e.t.’s was on, which started with a new bullet from Accufab Racing. Rather than go with a bigger 5.4 or 5.8-based motor, they decided to stick with stock displacement and instead, focused on efficiency.

“We decided to have the heads ported by Livernois Motorsports and paired those with custom-spec Accufab Racing cams, which were then mounted to a stout bottom-end from Accufab Racing with Billet I-beam rods and JE pistons,” Drew explained.

In keeping with max efficiency, they kept the compression up (10:1) and partnered the wicked motor with a 76mm Precision turbo, a Hogan Racing intake manifold, Accufab 90mm throttle-body and a custom AED turbo kit with a laid-down FMIC all crafted by AED. An ATI damper and a Meziere electric waterpump were added, as was the F.A.S.T. XFI standalone system all under the notion of harnessing all that power.

Since the Cobra was still a street car and drivability was nearly as important as outright performance, they kept pleasantries like the power windows, hydroboost, and basically everything but the A/C. They also added a Powerglide transmission with a 5,600 rpm stall and a Gear Vendors overdrive for solid launches and tranquil highway cruising—the setup was good for a best of 5.23 at 141 mph on 275 radials.

Behold, 4.6L of fury! In the land of small-tire racing, mod motors are scarce, but thanks to extreme efficiency and over 1,000 horsepower, this four-valve is holds its own.

The turbo kit was fabricated by Drew Wallace at AED and is anchored around an 88mm Garrett GTX turbo that feeds the 10:1 4.6L mod motor built by John Mihovetz.

As you know, horsepower isn’t the only thing that gets you down the track in a hurry, which is why the midnight monster may look composed up top, but it’s got a lot going on beneath the surface, including a Strange third member with 3.70 gears, Strange 35-spline axles, ⅝-inch titanium studs with billet lugs, Enterprise Motorsports custom housing and upper control arms, Chris Alston’s Chassisworks lower control arms and anti-roll bar, along with Santhuff coilovers.

Up front is a Racecraft chromoly K-member and A-arms, custom AED mid plate, and AFCO coilovers to help keep everything buttoned down. Let us not forget the wicked Lamb Components drag brakes hiding under the Bogart wheels that roll on ceramic bearings. Other go-fast necessities included a Racecraft rear wing, a custom Enterprise Motorsports cage and rear parachute mount with its Stroud parachute, the Kirkey race seat, Stroud harnesses, Racecraft steering wheel on the factory column that’s mated to a Racecraft tubular steering shaft and rack.

“The first turbo setup did really well, but after maxing out the 76mm and the injectors, instead of dialing it back and just having fun at events, we got the genius idea to rebuild it, and run in the Outlaw 8.5 class at the Super Nationals in Las Vegas…who’s idea was it again to make more power on a smaller tire,” Drew laughingly said.

As you already know, making the jump to the small tire class and pushing even more power through a setup with even more limitations isn’t exactly easy, but in proper AED fashion, they set out with an eye for efficiency.

“We ditched the air-to-air intercooler for an air-to-water setup for better weight distribution and cooling, and we rebuilt the turbo setup around a bigger 88mm Garrett GTX turbo so that the turbo was mounted up front, the exhaust poked through the fenders, and so you wouldn’t see very much piping under the hood,” Drew said. He’s right, look at that bay and tell us where the charge pipes are?

Along with the bigger snail and new turbo setup, some other go-fast bits joined the party too; like reversing the direction of Hogan intake, and a custom laid-down radiator (more on that later).

Like most builds, they thrashed to the very end before making the drive to the Super Nationals in Vegas with only hours to spare, arriving at the track without any testing under their belts and very little sleep. In the end, despite the odds, they unknowingly built a contender out of the little 4.6 that could.

“We arrived at the track only having idled the car into the trailer, we weren’t even sure if the 88mm turbo was even going to spool at the line with only a 4.6 and no nitrous assist,” Drew said.

The Cobra had never been on the dyno or even scaled; they did that and made test-hits in the TNT lanes in order to check the tune before going rounds. What they found was a maxed-out fuel pump because the new turbo setup was ready to party. Thankfully John Urist of Hellion Turbo loaned them a Weldon 2445A pump, the next size larger so they could race in the morning.

“In the morning we made our first full pass on low boost and went from a previous personal best in the 5.20s straight to 4.96—as we began feeding in more power we realized that even with the big pump we couldn’t give it enough fuel on top end, so we backed it down to 28psi and let it fly, instead working on the short track times,” Drew said. As you know, in the 26×8.5 small tire racing world, only a handful of people have been that fast on such a small tire, regardless of the powerplant, which makes the feat of doing so on such a small motor that much more impressive. To put that into perspective, on that pass they shut the car off at the eighth-mile and still coasted to a 7.8-second quarter-mile time…how’s that for fast?

But we digress; when he said, let it fly, what he meant was that on the morning of the race, after realizing that they were not only down on power because the fuel system couldn’t keep up with the demand of the engine on kill, but the street car amenities of the Cobra meant it was over 200 pounds heavier than most cars in the class. So what did they do? They did what had to be done to stay competitive.

“On the morning of the event, we decided to ditch the radiator, alternator, cooling system, and accessories to try and get it down the track quicker—we dropped 80 pounds and were still overweight,” Drew said.

After rescaling the car just minutes before entering eliminations, Jack hit the staging lanes and went rounds until ultimately facing the number one qualifier in the semi-final round; a seasoned racer with a wicked-fast, ultra light, big-cubic inch small-block Ford powered race car. “We continued to tweak the tune and the suspension all the way until the last round, and ultimately we lost by a tight margin—we went a 4.81 to his 4.80,” Drew said.

It was bittersweet; as they unknowingly built a real contender with power windows, carpets and a mini-mouse of a motor; and yet, they knew that with the proper injectors and a more aggressive tune they might have walked away with the W.

Fast-forward the clock some months and they found themselves thrashing for another big West Coast, small-tire event; same story, missing parts, and late-nights. Except, this time, they had to repair an oil pan when the car went skyward on the first test hit. Nonetheless, they backed up their Vegas run in eliminations with a 4.73 at 154 mph thanks to bigger injectors and an upgraded XFI system, which, as we mentioned, makes it the quickest 4.6L-powered Terminator Cobra on earth…on a baby 8.5-inch tire no less.

Beneath the Bogart wheels you’ll find Lamb drag brakes, ceramic bearings, and plenty of Racecraft suspension components.

It’s hard to believe just how fast this Cobra is going on itty-bitty 26×8.5 Mickey Thompson drag radials.

“Funny thing is, we could easily take 250 pounds out of the car and go even faster, but then we would need a bit more cage work and we would be tearing apart such a nice car,” Drew said.

Sure, the car has plenty more left in it, but at what expense? For AED, while they’re always searching for more, anything beyond its current state, and the car loses one of the very things that makes it so unique, it’s perfect aesthetics.

Speaking of perfection, which as you’ve noticed, is a common theme here; while you may think that Drew’s favorite part of the car is its killer looks or serious speed, in reality, what makes him happiest is seeing it launch straight. In fact, he takes the most pleasure in the subtle things most wouldn’t notice, like how the car requires very little steering input going down the track or how after a 100-foot wheelie it landed back in the center of the groove—he lives for the nuances, the small things and the difficult ones required of a car at this level.

Perhaps what makes this car so great is that the owner and the builder sweated the small stuff, settled for nothing less than perfection, and stuck to their guns of race car performance with show-car aesthetics—it wasn’t easy, but then again, how does the old saying go; if it was easy, everyone would be doing it, right?

“I joke with my wife that AED stands for Adversity Every Day, and if you’re into building and racing fast cars, you know exactly what I mean,” Drew said.

The post The quickest and fastest 4.6L-powered Terminator on the planet…and probably the cleanest too appeared first on Hot Rod Network.

from Hot Rod Network http://www.hotrod.com/articles/quickest-fastest-4-6l-powered-terminator-planet-probably-cleanest/ via IFTTT

[biketrade]

Ryde Round Stubby Motorcycle Bar End Mirrors - Chrome

£6.99 (as of 03/21/2015 at 14:53) Product Description Features Motorcycle Bar End Mirrors - Black Mirror Diameter: 70mm - Total Length: 90mm . Stubby Design - Fits Flush Against Bars with No Stem Fits 22mm Motorbike Handlebars with 18mm Internal Diameter Round Mirror with Adjustable Read more at https://www.pinterest.com/pin/314407617727060723

[blogbathroomaccessories-blog]

Description

Monsoon Showers Heated Towel Rail x 3 - Round Matte Finish

This stylish and efficient heated towel rail is a practical addition to any bathroom. Can be used as an extra heater for the bathroom or to assist in drying towels year round. This towel radiator has a simple but attractive design.

The towel warmer couldn`t be simpler to use; simply fit to the wall and enjoy a luxurious level of warmth throughout the room and warm or simply to dry towels.

Dimensions: 600mm x 90mm x 32mm

Power: 12V, 50HZ, 20W with 1.4m power cable, without plug. Used with a 12V AC safety isolating transformer, included. Up to 3 towel rails can be used on one transformer. However, for best results use 1 transformer per rail. Transformer Input: 220-240V 50 Hz 0.50A ? 0.97; Output 11.5 VAC Max 120W. Additional transformers are sold separately

3 straight horizontal bar

Easy installation

Concealed wiring to wall

Manufactured from high quality, 304 stainless steel, matte (non polished) finish

1 x Transformer included.

SAA Certification... Bundled item (SN:ETW71 M & Transformer 1 & SE041 - Wall fittings) (214843-13)

[bestshopuk]

#‘Kair Air Vent Gravity Grille with Non-Return Shutter Flaps – 100mm Round Spigot – Terracotta – SYS-100 – DUCVKC243-TC’ Price Comparison

Great inside the hose and opens well when the dryer …

Bought this to go on the end of a tumble dryer vent hose when finally got around to blowing a hole through the wall instead of opening a windows to dangle hose out of. Great inside the hose and opens well when the dryer is on. As soon as dryer stops vent closes. Perfect. Has holes to screw it to the wall which I did and put a silicone bead around the edge too to keep the elements out

Price Today Kair Air Vent Gravity Grille with Non-Return Shutter Flaps – 100mm Round Spigot – Terracotta – SYS-100 – DUCVKC243-TC.

Title : Kair Air Vent Gravity Grille with Non-Return Shutter Flaps – 100mm Round Spigot – Terracotta – SYS-100 – DUCVKC243-TC

ASIN : B004X4RXAE Description : Kair terracotta plastic 100mm / 4 inch air exhaust outlet round vent with non-return shutter flaps which close automatically when not in use to prevent unpleasant odours noises or draughts flowing back through your duct into your property. 100mm round male spigot on the back of the grille fits inside Kair 100mm Round Female Duct Pipe (Part: DUCVKC250 ) or 102mm flexible hose (Part: DUCP0092/102/35 ). Easy to install just push-fit together & seal if required using a method of your choice (Popular options include Mastic Sealant Poly Cement or Tape). Perfectly suited as an outlet for your Bathroom Toilet or Kitchen extractor fan Hydroponics In-Line Extract Fans or Cooker Hood. Unlike generic imported products Kair products are made in the UK and are compatible with the extensive range of fittings outlets and grilles in multiple sizes to offer your a complete solution for all of your ventilation needs. For other sizes please use the search bar above. Kair Ducting comes in the following sizes: 100mm Round 125mm Round 150mm Round 110mm x 54mm Rectangular 150mm x 70mm Rectangular 180mm x 95mm Rectangular 204mm x 60mm Rectangular 220mm x 90mm Rectangular 234mm x 29mm Rectangular 310mm x 29mm Rectangular. If you have any questions please do not hesitate to ask fellow purchasers via the Customer Questions & Answers system below. Features :

Terracotta colour plastic ducting air inlet / air outlet with gravity shutters – 4 inch / 100mm round male spigot on the back of the grille fits inside Kair 100mm Round Female Duct Pipe (Part: “DUCVKC250”) or 102mm flexible hose (Part: “DUCP0092/102/35”).

Non-return shutter flaps close automatically when not in use. Stops unpleasant odours, noises, or draughts flowing back through your duct. Gravity flap – no need for springs that break. Available in 5 colours: White (Part: “DUCVKC243”), Terracotta (Part: “DUCVKC243-TC”), Brown (Part: “DUCVKC243-BR”), Beige (Part: “DUCVKC243-BG”), and Black (Part: “DUCVKC243-BK”). Built to last out of high-quality Polystyrene/Polypropylene plastic Material. Max /

Easy to install, just push-fit duct and fittings together. Perfectly suited for use as a termination point with your Bathroom or Kitchen extractor fan, Hydroponics fan, or In-Line Extract Fan. This grille can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive ventilation, positive input, air conditioning, HVAC, and Heat Recovery Systems.

Wipe-clean durable design for indoor or outdoor use. Suitable to use in compliance with Part F Building Regulations. Airflow performance independently tested by BSRIA or BRE. Free Air: 7200mm2. Static Pressure Drop in Pascals: 15 l/s = 10.94 Pa – 30 l/s = 18.59 Pa – 60 l/s= 24.21 Pa.

Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee. Made in the UK. Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles. For the full range of compatible 100mm and 110mm x 54mm Rectangular products please search for “Kair SYS-100 Ducting” in the search bar. Also fits other ranges. If you have any questions please do not hesitate to ask fellow purchasers via the Customer Questions & Answers system below

Category: Ramekins & Soufflé Dishes Brand: Kair Item Page Detail URL : link Rating : 4.6

The post ‘Kair Air Vent Gravity Grille with Non-Return Shutter Flaps – 100mm Round Spigot – Terracotta – SYS-100 – DUCVKC243-TC’ Price Comparison appeared first on Bestshop UK.

[boatgoldcoast-blog]

Summer Fishing

Fishing on the Gold Coast is an all-year-round affair, with many options from rivers, canals, estuaries, creeks, and sand banks to offshore in the vast ocean. As the long summer days heat up, the waters teem with inshore fish such as flathead and offshore ones such as mackerel.

Here is a list of inshore and offshore species, and tips on when, where and how to catch them.

Inshore

SPECIES WHEN & WHERE EQUIPMENT HOW TO  FLATHEADLate run after heading back from spawning at the river mouths Hard body lures or soft plastics on typically light gear no more than 8lb line/braid for best results;Flathead like bright pinks, chartreuse, and natural colours typically.  

Best methods are casting or trolling. Flathead can also be tempted or taken on baits including small pilchards or white bait. Live bait can be either herring, whiting or small mullet.

MANGROVE JACKShould start heating up as water temperatures begin to rise. Heavier tackle should be used with this species; 20+lb braid when using larger hard bodies or plastics. Live baits are, however, their preferred meal. Trolling or casting are again the best methods. Pay particular attention to snaggy areas, including but not limited to, rock walls, pontoons, jetties and marinas. (Most marinas on the Gold Coast prohibit fishing, so it is necessary to check first before deciding to fish at any marina.) SAND WHITINGIn big numbers and size in yabby beds and sand banks Gear should be as light as willing or prepared to go 6lb max.Live yabbies or worms (either sand or blood worms).Ultralight braid with either poppers or stick baits, between 50 and 90mm. Casting is the best method for sand whiting if using baits. Cast it out and allow it to sit until eaten/taken. MUD CRABSIn full swing as water temperatures start to rise. Measuring crabs is a MUST to comply with legal requirements. (See instructions on how to measure crabs.) Only MALE crabs can be kept for consumption. Place labels on both the pots and floats, clearly indicating your name, phone number as required by law. Place close to or around creek mouths and near mangrove trees and muddy banks. DO NOT drop next to professional fishing pots. (Professional pots are tied to coloured float balls with numbers engraved on the sides.)

  OFFSHORE

SAILFISHSmaller sizes off Jumpinpin Bar; part of the billfish family which include blue, black & striped marlin Skirted lures; 20lb+ linesTry and match lure size to that of the bait fish under you. Find Bait Schools on sounder or on the surface and troll with the skirted lures around on with a minimum 20+lb Line. MACKERELJumpinpin Bar from behind the breakers out to roughly the 36’s 20+lb gear, and hard body lures or poppers Casting towards bait schools with hard bodies or poppers.Can also troll using hard bodies or, alternatively, can also troll with live or dead baits. MAHI MAHI (DOLPHIN FISH)From the 36’s out to deeper depths. Find current lines with some floating debris as a starting point. Then, use techniques varying from trolling to float lining to jigging, as you may be required to use all 3 techniques throughout your day to achieve the bite.

    Identifying mud crabs (male vs female) and how to measure

    Take this list with you as you prepare your gear and plan your fishing trip before you go out for a day or two. Whether solo fishing or in the company of friends, summer fishing with ice-cold drinks is the best way to soak in the heat.

  By Luke Rafton

Summer Fishing was originally published on Boat Gold Coast

[leyuangroup]

Magnetic Filters & Separators Manufacturer

Food grade magnetic particle separators are massively advanced when compared to traditional applications of magnets to remove ferrous particles. According to the function of the magnetite filter, it also includes magnetic tubes, magnetic grates, magnetic boiler filters, magnetic drawers, and magnetic traps.

 As one of the leading magnetic filter manufacturers in China, Leyuan offers a magnetic filtration system manufactured in strict accordance with food safety standards for applications with demanding customers. Strong magnetic fields can remove nano-level ferromagnetic contaminants. These magnetically-separated products are equipped with high-intensity magnetic separator that can withstand over 13000Gs of magnetic force, and so they are widely used in the magnetic separation, inline magnets for food processing, pharmaceutical processing, and oil and gas industries. Design and custom types of industrial magnetic separators for different industries.

  Types of Magnetic Filter & Separators

Magnetic Tube

Magnetic Tubes remove iron contaminants to purify the material and protect the equipment. Our magnetic bar is TIG welded, sealed and fully waterproof. After 4 polishing procedures, the surface roughness reaches RA0.6 which fully meets the requirements of food and pharmaceutical production.

  Magnetic Grid

Strong permanent magnetic grid, has 3-6 times stronger than ferrite magnets. It provides more than 13000G strong magnetic force separates fine ferromagnetic impurity particles, the product can be easily installed in the cone, square, round or irregular shape hoppers.

 Magnetic Drawer

Magnetic drawers are made from magnetic grates in a 304L or 316L stainless steel casing. As one kind of popular magnetic separator, drawer magnets effectively separate ferrous particles. The magnetic field intensity of magnetic drawers is over 13000GS and so is applicable to all types of powder industries.

 Magnetic Trap

LEYUAN permanent magnet magnetic traps, equipped with super-strong magnetic bars, are used to protect pipe lines and processing equipment. The magnetic trap adsorbs ferromagnetic dirt, rust and fine iron pollutants in the pipeline through magnetic force to ensure product purification.

 Magnetic Boiler Filter

As a magnetic central heating filter bars manufacturer, we produce 20-50 thousands magnetic bars every year, which are used in central heating magnetic filtration system. Diameter: 10mm, 15mm, 22mm, 25mm, or customized as your request, Length: 90mm-2000mm, or customized as your request.



Products

Magnetic Filter



Magnetic Tube

Magnetic Grid

Magnetic Drawer

Magnetic Trap

Magnetic Boiler Filter

Magnetic Coupling

Pot Magnets



Permanent Magnet



Custom Design Magnets

Industries

Power Transmission

 Magnetic Separation

 Food Processing

 Pharmaceutical Processing

 Chemical Processing

 Recycling

 Office Supplies

 Oil and Gas

 Interested in Magnetic Products & Assemblies?

 Submit inquiry to Leyuan now!

 Magnetic Filter FAQs

How Does A Magnetic Filter Work?

The magnetic filter can separate magnetic substances from nonmagnetic substances through the magnetic filtration system. Magnetic filters equip permanent magnets, which generate magnetic force, magnetic substances will be held by magnets but nonmagnetic substances will not, they pass through magnets because of gravity or pressure, then you get pure nonmagnetic substances.

 What Is The Most Powerful Magnetic Material?

At present, the most powerful magnetic material is sintered neodymium which was invented in the year of 1985.

 Which Metal Can Not Be Separated By Magnetic Filter?

3 kinds of materials can be held by magnetic force: iron, nickel and cobalt. All others cannot be separated by all types of magnetic separators.

 What Are The Benefits Of Magnetic Filter?

1.remove ferrous contaminant to purify incoming material.

 2. separate iron particles to prevent damage to equipments.

  https://www.leyuangroup.com/products/magnetic-filter/