#welding blog

[bobmartinblogs]

What are the key differences between a MIG stick welder and a traditional MIG welder?

When choosing welding equipment, understanding the differences between various types of welders is crucial. Among these, the MIG stick welder and the traditional MIG welder each offer unique benefits and limitations. In this article, we'll break down the key differences between these two welding options by addressing common questions that arise when comparing them.

What Is a MIG Stick Welder and How Does It Differ from a Traditional MIG Welder?

A mig stick welder is a type of welding machine that combines features of both MIG (Metal Inert Gas) and stick welding processes. It typically allows for welding with or without the use of gas. On the other hand, a traditional MIG welder (often referred to as a gas MIG welder) relies on a constant supply of shielding gas to protect the weld from contamination. MIG stick welders can often switch between MIG and stick modes, making them versatile. In contrast, traditional MIG welders are specialized for MIG welding and require a constant flow of MIG welder gas to function properly. This difference in operation affects how each type of welder handles various welding tasks.

How Do the Welding Processes of MIG Stick Welders and Traditional MIG Welders Compare?

The welding processes of MIG stick welders and traditional MIG welders differ mainly in terms of gas usage and versatility. Many MIG stick welders can operate without shielding gas, using flux-cored wire instead. This makes them suitable for outdoor or windy conditions where gas shielding might be less effective. They can switch between MIG and stick welding, making them adaptable to various materials and situations. A traditional MIG welder always uses mig welder gas to shield the weld. This creates a cleaner weld with less spatter but requires careful setup and control of gas flow. They provide consistent results when welding indoors or in controlled environments where gas shielding can be effectively maintained.

How Do MIG Stick Welders and Traditional MIG Welders Affect Project Costs?

The cost implications of using a MIG stick welder versus a traditional mig welders can vary based on several factors:

MIG Stick Welder:

Initial Cost: May have a lower initial purchase cost.

Operational Costs: Potentially lower ongoing costs since it can operate without gas, reducing expenses related to MIG welders on sale or gas refills.

Traditional MIG Welder:

Initial Cost: Can be more expensive due to the specialized equipment and gas setup.

Operational Costs: Higher ongoing costs due to the need for continuous gas supply and maintenance of gas equipment.

What Should You Consider When Choosing Between a MIG Stick Welder and a Traditional MIG Welder?

Choosing between a MIG stick welder and a traditional everlast mig welder depends on your specific needs and welding environment. Consider the following:

Welding Environment: If you need to weld outdoors or in variable conditions, a MIG stick welder might be more suitable due to its gasless operation.

Project Precision: For projects requiring clean, precise welds, a traditional MIG welder with gas might be the better option.

Budget: Factor in both initial and operational costs, including whether you can manage the ongoing expense of MIG welder gas.

Making the Right Choice for Your Welding Needs

In conclusion, the decision between a MIG stick welder and a traditional MIG welder depends on your specific welding needs and preferences. The MIG stick welder offers versatility and can operate without gas, making it a flexible choice for various conditions. On the other hand, a traditional MIG welder provides cleaner, more precise welds in controlled environments but comes with the added cost of gas. By understanding the key differences and evaluating your project requirements, you can choose the best welder for your needs. Whether you opt for a MIG stick welder or a traditional MIG welder, ensuring you have the right equipment will help you achieve successful and high-quality welds.

[saeran-exe]

20/08/24

I forgot to post this yesterday 'cause I got home so late from uni 😭

Yesterday was a pretty tiring, but worth it, day of studying since I missed an entire week of class and had to study all of the content from last week's welding technology class + study from a texbook on science and engineering of materials.

Content studied yesterday:

> Stress-Strain of metals under tension, compression, sheer and torsion tests ;

> Stress-Strain graph (elastic and plastic strain, recognization of ductile and brittle materials, points of elastic limit, yielding, ultimate strength and rupture) ;

> General types of welding ;

> Concepts of welding technology .

My welding technology class went great and I was relieved when I found myself following the explanations with ease and being able to participate because of successful studying and absorption of the last class' content through photos of the board that my classmate sent me. I was really scared I would fall behind but I feel pretty confident and intrigued by the subject and engineering in general... I think like I'm finally falling in love with it!

[pfhwrittes]

Welding anon here, I technically didn’t complete the program bc I am missing a single credit, which is fine by me because I ended up switching up and going into agriculture instead, which I am much happier to be in and I just got my degree for it. I don’t regret taking that program because I enjoyed the work (best I can describe it? It was almost like piping a cake) but I was the only girl in the room, not usually a problem for me but the guys didn’t talk to me at all and it was soul crushingly isolating

I always pictured him as a welder bc ye he has massive beefy arms and him being an explosives expert, I could see him enjoying the sparks and the process of creating something durable and strong. Both require a good bit of math, (not to mention shooting math which I still struggle with too) Just seems like a dude who finds fulfillment in difficult, heavy precision work. All those scars on his arms too… yea he’d be a hot welder, all sweaty and bit dirty and smelling like steel. Would make you a welded flower bouquet and it would look immaculate

I did also dabble in wood working (not carpentry. If ur curious I was making bee hives bc I was a bee keeper for a time and my company was so small I had to learn how to do everything) price is so carpenter core. He would smell like freshly cut wood, just a bit smokey and strong. I can just picture saw dust absolutely filling his pockets and trailing it around everywhere by accident. Carpenters always have really calloused, rough, strong hands and that’s just so him. Obsessed with carpenter price ngl.

I’m kinda redneck as fuck and I have the obsessed with being outside flavour of autism. I do have buff arms too 💪 (sorry this is a long ask sorry)

welding anon (or maybe i should just call you buff 💪 anon because hell yeah hell yeah hell yeah) please do not ever apologise for long asks. i love long asks. i cherish long asks. i cherish you for sending me a long ask.

firstly, the guys on your course SUCK for making you feel isolated. i get it on some level as i've been the only non-cis person on-site before. i know i've been lucky as i am technically a plumbing nepo-baby so any other shit has been shut down hard by my mum but more often than not she's the only woman on-site. thankfully she's got something like 40 years experience working with the guys she works with so she knows everyone and their children (and all the gossip, tradies are incorrigible gossips and i love it so much).

secondly, fuck yeah to finding something you love doing! i'm incredibly proud of you for getting your degree! go you! and also you're an incredibly talented multi-skilled individual, be proud of yourself for all the skills you have (welding, woodworking, beekeeping!!!).

thirdly, it's official you've converted me into a welder!soap person. you're absolutely correct. he would love welding. sparks + maths + methodical + challenging = welder!soap. he'd be so cheesy about giving you a metal flower bouquet too. excuse me for a minute while i think about sweaty soap with big beefy arms. oooooh boy 😵‍💫

finally, you are entirely correct that carpenter!price would smell so good. ugh, the smell of cut wood is addictive and definitely one of my most favourite smells in the world (i am that person that lingers in the timber yard in a B&Q just to get a whiff of the cut pine). carpenter!price would love his sweetheart fussing over his callouses and rubbing hand cream into his hands before bed every night, you can't tell me he wouldn't. i think the fact that he smells so good definitely makes up for the fact that you'd be fishing pencils and sawdust out of his pockets every time you did laundry. plus you'd have the most beautiful kitchen cabinets that are the envy of all your friends just because he wanted to give the kitchen a "spruce up" (side note: never trust a tradie to do their own DIY, you WILL end up living in a half-finished construction site for over 2 years).

[dwarvenstims]

🦁 — fíli stimboard

🥐 — welding, baking & lion stims for anon

★ : ★ : ★ | ★ : O : ★ | ★ : ★ : ★

[cursemyexistences]

i welded this for you ⋆ ˚｡⋆୨୧˚

[askpomniithejester]

Pomni

Can you weld

Ever since the accident of ‘87 I swore to never weld again

[backpackingspace]

this isn't my writing blog but

wrote some of the most messed up world building I've ever concocted before. Which is saying something bc growing up my short stories got my parents frequently called in

[puppyeared]

scab... in my nose.......... nhhhgg....

[bethncherry]

the final hours of the oc smackdown poll is here! @wallspikes + @frostios this poll was so much fun! your ocs deserve the world and im happy to have been up against such cuties < 3 please spoil your ocs after this good brawl lol

[futuristic-science]

Please remember when using a welder you haven't used before to double check the MIG settings (if using a MIG welder of course)! Setting the voltage too high can burn holes in your metal, yes, but can also cause short circuits if you're unlucky.

[askthebadkidz]

Gorgug made Zelda a bunch of his medal flowers and Sam fucking- broke one. So I’m gonna break her. He worked so hard on that with Ayda >:(

-Fig

[bobmartinblogs]

What Welding Equipment Does a Professional Welder Need?

Professional welding requires a comprehensive set of tools and welding equipment to handle diverse projects and achieve high-quality results. Whether working on industrial applications, complex repairs, or precision fabrication, having the right welding supplies is crucial. Here's a detailed look at the essential welding equipment and supplies that every professional welder should have in their arsenal.

Core Welding Equipment for Professionals

For any professional welder, having robust and versatile welding equipment is fundamental. One of the core pieces of equipment is a high-quality MIG welder. MIG welding equipment is favored for its ease of use and efficiency, especially in applications requiring continuous welds. A professional-grade MIG welder typically features adjustable settings for wire feed speed and voltage, enabling precise control over the welding process. In addition to MIG welders, professionals often require TIG welders for applications that demand high precision and a clean weld appearance. TIG welders are ideal for welding thin materials and performing intricate welds. Stick welders, while less common in some professional settings are still essential for heavy-duty tasks and situations where portability is important.

Another crucial piece of welding equipment is a reliable plasma cutter. Plasma cutters provide clean and precise cuts on various metals, making them indispensable for cutting sheet metal and other materials with high accuracy. Additionally, a well-equipped professional welder will have access to various grinders and sanders for finishing work and ensuring clean, smooth welds.

Essential Welding Supplies for a Professional

A wide range of welding supplies is necessary to complement the welding equipment used by professionals. One of the most critical supplies is welding wire. For MIG welding, the choice of wire type such as ER70S-6 for mild steel or aluminum wire for aluminum work—depends on the specific materials being welded. The quality and type of welding wire directly impact the weld's strength and appearance. Shielding gas is another vital supply. For MIG welding, a mixture of argon and carbon dioxide (CO2) is commonly used, while pure argon or helium might be used for TIG welding. The correct shielding gas helps protect the weld pool from contamination and ensures a stable arc.

Protective gear is equally important in professional welding environments. High-quality welding helmets with auto-darkening lenses, durable welding gloves, and flame-resistant clothing are essential for safety and comfort. These supplies protect welders from intense light, heat, and spatter, ensuring a safe working environment.

Finding the Right Welding Supply Store

Choosing the right welding supply store is crucial for acquiring high-quality welding supplies and equipment. A good store should offer a comprehensive range of products, including MIG welding equipment, TIG and stick welders, plasma cutters, and essential welding accessories. When evaluating a welding supply store, consider factors such as the variety of products available, the expertise of the staff, and the quality of customer service. Stores that provide detailed product information, including specifications and usage recommendations, can help professionals make informed decisions about their equipment and supplies.

Additionally, the store should offer reliable support for troubleshooting and maintenance of welding equipment. Access to knowledgeable customer service representatives who can provide technical assistance and answer questions about equipment setup and operation is valuable for ensuring that you get the most out of your welding gear.

Advanced Welding Equipment and Accessories

Additional welding equipment and accessories might be necessary for specialized professional work. This includes advanced machines like automated welders or robotic welding systems, which can increase efficiency and precision in high-volume production settings. Fume extraction systems are another important addition, especially in environments where welders are exposed to high levels of smoke and fumes. These systems help maintain a clean and safe working environment by removing hazardous fumes and particulate matter from the air.

Proper storage solutions for welding supplies are also essential. A well-organized workspace with dedicated storage for welding wire, electrodes, and other small parts ensures that supplies are readily accessible and in good condition. This organization helps streamline workflow and maintain an efficient working environment. By equipping yourself with the right welding equipment, choosing high-quality welding supplies, and selecting a reliable welding supply store, you can ensure that your professional welding operations are efficient, safe, and capable of producing top-notch results.

[saeran-exe]

07/08/24

It's past midnight already but I'll pretend it's still August 7th

To-do list for the day:

Wake up late and miss boxing training (not planned 😭)

Shedule appontment to renew passports

Start studying Transport Phenomena

Have french class

Transport Phenomena class at campus

Borrow textbooks from the library

Start reading the textbooks for Welding Technology class ❌️

Read a few pages of The Wizar of Oz ❌️

[aristomal]

John comes back to his hangar one day just to find all the welds on his plane have been cut through and replaced with welds with no gas in them.

[donnies-low-empathy]

I love him so bad ough

Transcript:

Mikey: Boo!

Donnie: GAH!

Mikey: Woah! Easy, partner, don’t shoot!

Donnie: Mikey, never sneak up on a turtle while he’s welding!

[cursemyexistences]

i hope the girls at the grocery store thought i was pretty wearing my dirty ass welding clothes with shmutz all over my face