#pe pipe shredder

[applelzp]

How to Recycle Thick-Wall Pipe? Waste Plastic Pipe Shredder/PVC HDPE PP ...

[henry-jwell]

DYSSG Pipe Crusher and Shredder Unit

DYSSG shredder is able to shred the PE, PP, PVC pipe with diameter 1200mm, the length of 3-6m pipe can be shredded directly without cutting, and the rotary speed is slow and stable. Variety of pipes is put into theflat feeding tank, and the tanks closed automatically, and push the pipe by hydraulic into the center axis for shredding.The material after crushing is transported by conveyor belt for secondary crushing in order to get the requested granule. DYSSG shredder has the main advantage of energy saving safe and efficient,and the system is controlled by PLC center control system. Main technical specification Model Max.shredable pipe(mm) Main motor power(kw) Rotor speed(rpm) Mechanical pusher power Rotor blade swing diameter Output(kg/h) DYSSG-630 630 2×30 39 11kw Φ848 800-1000 DYSSG-800 800 2×37 33 11kw Φ1028 1000-1200 DYSSG-1000 1000 2×45 27 15kw Φ1258 1200-1500 DYSSG-1200 1200 2×55 23 15kw Φ1478 1500-2000 Product image display Read the full article

[jwellextrusionmachine]

Jwell PE PVC PP pipe shredder crusher system

[wisconenvirotech]

Heavy-duty shredder developed by Wiscon Envirotech.

Industrial Shredder Applications

Plastic: Plastic lump, plastic pipe, plastic sheet, PE film, PP woven bag, PET bottle, plastic pallet Wood: industrial waste paper, wood pallet Scrap Metal: circuit board, aluminum material, copper material, wire, cable

https://www.wiscon-tech.com/shredder/

[sheddertech-blog]

Plastic Pipes Shredder Machine

Plastic pipes are widely applied in many fields like agriculture irrigation systems, gas piping, water mains, drainage outlet, sewer, underground tap water supplies, etc. Such kind of plastic piping usually is made of below four types of plastic materials: PVC (Polyvinyl Chloride), PE (Polyethylene), PP (Polypropylene) and Pex (Cross-linked Polyethylene). Among these materials, PE and PVC are the most commonly used for plastic pipe.

               Being the best material choice for piping in various industries, it is not only due to plastic pipe’s good performance, but also because of its long and sustainable life (estimated to be more than 100 years according to WSAA). Even when the long service life is reached, it can be recycled and made into new pipes, or made into some other plastic products such as rubbish bin, plastic the film, etc.

               Although plastic pipe has a long life cycle, there are many scrap pipes generated in life. For example, scrap pipes may be leftover during the pipe manufacturing process, road or building installation project, house decoration project, or old and damaged pipes need to be replaced.

               If you have piles of scrap plastic pipes need to be recycled, loading, transporting and unloading would be very costly and troublesome without proper shredding or granulating in advance. Shredder Tech provides different models of Pipe Shredder and Pipe Granulator which can handle almost all sizes and shapes of plastic pipes. For shredding small volume of PVC pipes, our PPC Series pipe granulator is most suitable and most cost-effective. If you have a large volume of various types and various sizes of pipes to be shredded, you can consider our DR Shredder single shaft shredder with hydraulic-driven pusher, or even our horizontal pipe shredder which is very heavy duty but very efficient especially suitable for handling long and big diameter pipes.

               If you need advice or help to choose a shredder machine to reduce the size of your plastic pipes, contact us today. One of our sales representatives will provide you the most suitable solutions to fit your project.

[raymondmill]

Metal shredder

Metal shredder main sheet can be less than 5 cm of such as: caigang watts, oil barrels, cans, paint bucket, motor shell, motorcycle engine shell, auto oil filter, hard metal materials are torn into 3-10 cm block, can also be wood metal shredder, automobile tires, large PE pipe torn and broken processing, is a multifunctional metal and broken pieces of machinery.

http://www.sg-shredder.com/Products/Industrial_Shredder/Metal_Shredder.html

[linghengmachine]

View this post on Instagram

A post shared by Seven Chan (@seven_lingheng_machinery)

PP PE PVC pipe tube shredder machine testing video , Henan LingHeng Machinery Co., Ltd，/http://www.sinolingheng.com / Whatsapp:+86-15637169509 /E: seven@sinolingheng.com #Metalshreddermachine #metalshredder #metalshredderforsale #metalshredderinc #metalshreddervideo #Metalshreddermachine #Metalshreddermachinemanufacturers #Metalshreddermachineprice #Metalshreddermachineforsale #Metalshreddermachineinindia #metalshredders #metalshreddersforsale #metalshreddersnearme #metalshredding #metalshreddingmachinesforsale #industrialmetalshreddingmachines #scrapmetalshredder #scrapmetalshredderprice #scrapmetalshreddermachine #scrapmetalshredderforsale #scrapmetalshredding #scrapmetalshreddingmachine #industrialmetalshredder #industrialmetalshredderforsale #industrialmetalshredderprice #earthdayeveryday #earthday #recycle #PPpipeshredder #tubeshredder #PVCshreddr #PVCcrushing （在 Henan Ling Heng Machinery co.，ltd）

[waimaoniu-blog]

http://www.wellmancn.com/case/the-pakistani-customers-to-visit-our-company-pe-pipe-production-line#.WiY5TlPOnBE

The Pakistani customers to visit our company PE pipe production line

The Pakistani customers to visit our company PE pipe production line， PVC pipe equipment, PPR pipe equipment，Plastic shredder, etc.Our company successfully cooperate with Pakistan customers.

Company : Zhangjiagang Bonded area Wellman Machinery Equipment CO.,TL

Address : 250B, Noah logistics building, Zhangjiagang Free Trade Zone

Phone : +86-512-58665322

Fax : +86-512-58665229

Email : amy@wellmancn.com

[wasteplasticrecyclingmachine]

View this post on Instagram

A post shared by JOHNSON ZHANG (@redstarmachinery)

PP PE PIPE SHREDDER (at Zhangjiagang Redstar Machinery CO.,LTD.)

[thebestmadeinkorea]

Our products are ISO certified, field proven, innovative products. Equipment’s and Accessories such as Cylindrical fittings, Service Tees, Stopping fittings, Cutters, Small size Ball valves, Tapping and Stopping machines are designed and supplied to meet the request of Engineers in this field.

[applelzp]

PP PE Pipe Shredder/HDPE Pipe Shredder/PVC Pipe Shredder/Pipe Single Sha...

[henry-jwell]

DYSSG Pipe Crusher and Shredder Unit

DYSSG shredder is able to shred the PE, PP, PVC pipe with diameter 1200mm, the length of 3-6m pipe can be shredded directly without cutting, and the rotary speed is slow and stable. Variety of pipes is put into theflat feeding tank, and the tanks closed automatically, and push the pipe by hydraulic into the center axis for shredding.The material after crushing is transported by conveyor belt for secondary crushing in order to get the requested granule. DYSSG shredder has the main advantage of energy saving safe and efficient,and the system is controlled by PLC center control system. Main technical specification Model Max.shredable pipe(mm) Main motor power(kw) Rotor speed(rpm) Mechanical pusher power Rotor blade swing diameter Output(kg/h) DYSSG-630 630 2×30 39 11kw Φ848 800-1000 DYSSG-800 800 2×37 33 11kw Φ1028 1000-1200 DYSSG-1000 1000 2×45 27 15kw Φ1258 1200-1500 DYSSG-1200 1200 2×55 23 15kw Φ1478 1500-2000 Product image display Read the full article

[cloverincinerator]

www.chinaclover.net has been published on http://www.chinaclover.net/two-combustion-chambers-type-incinerator/

Two combustion chambers type incinerator

Load Capacity minimum:  1500 kg Burner fuel type:  Diesel Burner fuel rate max.:   20-25 Liter diesel/ per hour Burners minimum: 3 Burning rate minimum: 200-300kg/per hour Furnace bar area minimum: 2 м3 Fuel tank capacity minimum: 300L Main chamber burning temperature min. 1100 0C Afterburner chamber burning temperature min.  1300 0C Power supply 220V Incinerator items and electrical appliances should be weather proof and humidity resistant within the range of 30-90 % Incinerator should be compliant to the environmental protection rules in accordance to national legislation Maximum dimensions – Length – 5m, width – 3.5m, height – 5m.Medical and Biological wastage. 3.1              Main unit 3.1.1 Application      For incineration, general and pathological 3.1.2                                            Capacity       100 – 120 kg/h burn rate 3.1.3 Type    Two  combustion chambers type; primary  and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit 3.1.4         Operating time                   Minimum 8 hours daily 3.1.5          Operating temperature        From 850 0C to 1200 0C, Automatic controlled 3.1.6          Residual Ash                       5 to 10% 3.2     Primary Chamber 3.2.1 Construction    Constructed from heavy duty mild or aluminized  steel Or equal and approved equivalent 3.2.2 Insulation material               Refractory material lining similar or equal to calcium Silicate and hot face combination of heavy duty brickwork 3.2.3 Internal Construction           Fixed hearth type complete with gratings, concave bottom and charging door, lined with refractory material 3.2.4 Charging Door                      Suitable for manual loading of wastes and with smooth Dear seal equivalent of Ceramic seals with hinges. 3.2.5          Door Lock                             Automatic, Electric type 3.2.6 Ash removal door       Provided, for removing resultant bottom ash leftovers                              from the Primary chamber 3.2.7                                    Gratings       Provided 3.2.8                                            Loading    Manual loading of waste 3.2.9           Primary Burner                           Fully automatic, with fuel, temperature and speed  controls with ignition system  flame detector                                                         Air fan Complete with safety features, flame failure                                                                    Diesel fired fuel injector type Flange mounted 3.2.10    Blower      Provided.  3 phase for supplying excess combustion air through the distribution system with speed control system 3.2.11    Temperature    Minimum exit 850 0C 3.2.12                               Observation port    To be provided with protective glass type 3.3    Secondary chamber 3.3.1 Construction    Constructed from heavy duty mild or aluminized steel or equal and approved equivalent 3.3.2                                            Insulation    Refractory material lining 3.3.3             Combustion Temperatures      Above 850 0C, controlled electronically 3.3.4             Gas residue or retention time                                              > 2 second at minimum 850 0C 3.3.5    Secondary Burner    Provided, Diesel fired, Fully automatic, with fuel, temperature and speed controls With ignition system Flame detector Air fan Complete with safety features, flame failure Diesel fired fuel injector type Flange mounted 3.3.6    Ejector    Provided, Venturi type, for cooling the flue gases 3.3.7 Combustion Air Fan                      Provided for supplying combustion and creating a negative drift and turbulences with variable speed control 3.3.8                                         Temperature    Maximum  1600 0C 3.4       Chimney 3.4.1 Construction    Constructed from heavy duty mild or aluminized steel  or equal and approved equivalent Refractory material lining 3.4.2                                                    Length    10 m above ground 3.4.3                                                        Bore    about 350mm diameter 3.4.4            Discharge temperatures             About 850 0C 3.4.5                                            Emissions    To comply with standards in section 9 of third schedule of the waste management regulations, 2006. 3.5       Electrical System 3.5.1    Control unit                                           Fully automatic with microprocessor based control unit (PLC) automating all operations of the incinerator Capable of monitoring all incinerator parameters With large LCD or similar for display of all progress Parameters  i.e. temperature of primary and second chambers , turbulence and time With status lamp With user of defined and differed programmed operating cycles for different type of loads/conditions With safety interlocks, display of errors and visible and audio alarms. System for continuous  emission monitoring 3.5.2    Isolator switch                                  Supply and install isolator switch 100A, 3 phase, 415V, 50Hz, for the incinerator unit , including all necessary cables 10m 3.5.3 Distribution Board           Supply and install distribution board 100 A, 3 phase 415V, 50Hz, complete with MCBs suitable for the rating of the incinerator unit and associated equipment.  Wiring   to be done according IEE regulations. 3.5.4 Wiring       Make provisions for wiring the isolator switch, Distribution Board control unit to Incinerator and all associated equipment inside to incinerator room. Working length 20m. Wiring to be done using PVC Sheath cable on steel conduits and trucking and in accordance with IEE regulations 3.6    Fuel System 3.6.1          Fuel Tank                                            Supply and install storage fuel tank inside the incinerator room at an elevated position (about 1.5 m above the floor) Tank capacity, 500 liters, constructed from preferable suitable metallic material or high temperature resistance material Fuel type    Diesel 3.6.2 Fuel Lines                                       Supply and install fuel lines, complete with fuel filters, pump, sight glass, fuel level and all other safety devices and connect from fuel tank to incinerator.  Working length , 20m Fuel pipe material    Special copper pipes or similar and approved materials 4. Physical characteristics 4.1              Main unit                                           Floor mounted, stand alone, fixed hearth type Dimensions    About 2.5 x 2.8m (WxD) 5.  Operating environment 5.1              Power Requirements                      415V, A/C 50Hz, Three phase, with PE Ambient temperature                     10 0C to 40 0C Relatively humidity                          40% to 90% 6             Accessories 6.1             Rack, 2 m long                               1 piece Waste cart, stainless steel               1 piece 7. Spare parts 7.1                                                      Burner        1 set 7.2              Fuel Filters                                         6 sets 7.3 All other spare parts                 required for replacement during and after 12 months of operations.    2 pieces of each 8              Quality Standards 8.2 Manufacturing standards               Environmental Management and Coordination Act, 1999 Legal Notice No.121 of 29th September 1999 on                                                                         waste Management Regulations EU waste incinerator Directive- EC 76/2000 BS 3316 WHO Emission Standards World Bank Emission Standards or any other internationally recognized standards Conformity to standards                      CE marked or any other internationally recognized documents 9          Local back up service 9.1                                                         Available    Should be available locally 9.2           Capacity to service equipment                                                                         Manufacturer/Agent shall have adequate facilities, spare parts, qualified and skilled technical staff to offer comprehensive maintenance  service and spare parts sales for the lifespan of the incinerator 10       Delivery point 10.1                                                        KEMSA    For inspection and verification 10.2 Moi Voi, Makindu Maragua, Eldama Ravine and Isiolo Hospitals      For installation, testing, NEMA Certification and commissioning 11    Pre installation works Provide for foundation plinth, necessary plumbing works, Fuel piping works, Elevated Diesel oil storage tank, electrical works including cabling, trunking and switch gears required to install the incinerator and all its accessories to required IEE standards 12    Installation and testing    Complete installation and setup of the incinerator at designated as per manufacturer’s instructions Provide fuel and test run the incinerator for 3 hours daily for 7 days 13            Training 13.1 User training                                           On site user training on operation and daily up keep 13.2 Maintenance training                            On-site maintenance training on Preventive Maintenance, repair and trouble shooting 14    Technical Documentations 14.1         User manuals                                          2 sets 14.2         Service manuals                                     2 sets 14.3                                                     Drawings    2 sets 15        Commissioning 15.1    Testing and Commissioning of the machine to the satisfaction of the user 16    Warranty 16.1                                                  Equipment      Minimum of one year after commissioning on all parts. 16.2       Equipment system                                     Nil 17.    Maintenance contract 17.2         Comprehensive preventive & repair         service      Provided a 12 months comprehensive preventive and repair service contract inclusive of spare parts and material from date of commissioning

Capacity per day around 8-10 kg wastage/day.·         Which product do you offer, only incinerator or also compactor, shredder machine, any other equipment related to waste treatment ?

·         For the incinerator, can you propose (and of so please send us specs and price) incinerator for 25 kg/hr, 50 Kg / hr, 100 kg / hr, 200 kg / hr ? what is your minimum and maximum size available ?

·         As we are not so experience in incineration process, can you tell us which type of waste can go into the incinerator and still respecting international environmental regulation ?

·         Do you equipped your incinerator with filters ? if so which one and they are following which standard ?

·         Can you supply exhaust pipe from incinerator to the roof, and then whirly bird to avoid the rain water to go into the pipe ?

·         When we install an incinerator within a building, what are the distance to observe between equipment and wall and roof (as we need to supply also the building to house the incinerator )

[henry-jwell]

JWELL Co., Ltd was founded in 1978, the Chinese biggest plastic extrusion machinery manufacturers with over 25 years in extrusion industry .Now we have 6 production base , more than 3000 employees, having a strong technical & after sales service team for serving more than 150 countries. Welcome your Inquiry : saldl@jwell.cn WhatsApp/WeChat：+8618851213800 www.cnjwell.com (1) Plastic(PVC,PP,HDPE,PEX,PPR) pipe extrusion line (2) Plastic (PP,PS,ABS,PMMA,PET,ABS,PVC,PC,PE, PVDF etc.) sheet and plate extrusion line (3)CPP,CPE,TPU,PVC,PVDF,ETFE etc. casting film extrusion line (4) Plastic (PVC,PSP,XPE,XPS, WPC) foamed sheet & plate extrusion line (5) Plastic door/profile (PVC, PP, PC, ABS, PE) extrusion machine & Wooden (Wooden + PP/PE/PVC)plastic machine (6)PEEK,PPS,PPSU,PSU,PEI,POM bar and plate extrusion line (7) All auxiliary equipment of plastic extrusion equipment (Crusher, shredder, mixer, hopper, dryer, etc) (8) Recycling and pelletizing machine. (9) T die, roller, distributor, etc. (10) Extrusion Screw and barrel .

[henry-jwell]

Jwell TPU film extrusion line

JWELL Co., Ltd was founded in 1978, the Chinese biggest plastic extrusion machinery manufacturers with over 25 years in extrusion industry .Now we have 6 production base , more than 3000 employees, having a strong technical & after sales service team for serving more than 150 countries.

Welcome your Inquiry :  saldl@jwell.cn  WhatsApp/WeChat：+8618851213800   www.cnjwell.com

(1) Plastic(PVC,PP,HDPE,PEX,PPR) pipe extrusion line

(2) Plastic (PP,PS,ABS,PMMA,PET,ABS,PVC,PC,PE, PVDF etc.) sheet and plate extrusion line

(3)CPP,CPE,TPU,PVC,PVDF,ETFE etc. casting film extrusion line

(4) Plastic (PVC,PSP,XPE,XPS, WPC) foamed sheet & plate extrusion line

(5) Plastic door/profile (PVC, PP, PC, ABS, PE) extrusion machine & Wooden (Wooden + PP/PE/PVC)plastic machine

(6)PEEK,PPS,PPSU,PSU,PEI,POM bar and plate extrusion line

(7) All auxiliary equipment of plastic extrusion equipment (Crusher, shredder, mixer, hopper, dryer, etc)

(8) Recycling and pelletizing machine.

(9) T die, roller, distributor, etc.

(10) Extrusion Screw and barrel .

[henry-jwell]

JWELL Co., Ltd was founded in 1978, the Chinese biggest plastic extrusion machinery manufacturers with over 24 years in extrusion industry .Now we have 6 production base , more than 3000 employees, having a strong technical & after sales service team for serving more than 150 countries.  

Welcome your Inquiry :  saldl@jwell.cn   WhatsApp/WeChat：+8618851213800     www.cnjwell.com

(1) Plastic(PVC,PP,HDPE,PEX,PPR) pipe extrusion line

(2) Plastic (PP,PS,ABS,PMMA,PET,ABS,PVC,PC,PE, PVDF etc.) sheet and plate extrusion line

(3)CPP,CPE,TPU,PVC,PVDF,ETFE etc. casting film extrusion line

(4) Plastic (PVC,PSP,XPE,XPS, WPC) foamed sheet & plate extrusion line 

(5) Plastic door/profile (PVC, PP, PC, ABS, PE) extrusion machine & Wooden (Wooden + PP/PE/PVC)plastic machine

(6)PEEK,PPS,PPSU,PSU,PEI,POM bar and plate extrusion line 

(7) All auxiliary equipment of plastic extrusion equipment (Crusher, shredder, mixer, hopper, dryer, etc) 

(8) Recycling and pelletizing machine. 

(9) T die, roller, distributor, etc.

(10) Extrusion Screw and barrel .