#mg ver ka

[athena-gunpla]

MG Ver. Ka. 1/100 E.F.S.F Mass-Produced Middle-Range Support Type Mobile Pod RB-79 "Ball"

It's finally done!!! I showcased this kit's interior earlier here, but now it's finished and ready for a proper review.

This is my first Master Grade kit. I was unsure what to go for, but the RB-79 Ball looked pretty simple and forgiving for new builders. It's a smaller kit, with only six sprues in total - one being the display stand/hangar bay and the rest building the internal mechanics, surface plating, and arms. It even included some metal pieces for the arms, with steel piston parts and small wires. Surprisingly, there's also a small rubber sprue, which has both popycaps as well as some rubber gasket detailing parts for the arms and main engine.

A cool feature of this MG was the impressive internal detail, just like an RG kit (although with larger parts, there's room for a lot more detail). I brought out a lot of the smaller features with my metallic paints, giving it a bronzed look.

I really like how it turned out - it's got an almost steampunk look to it and it really looks like a functional machine.

The kit looks just as good with the armor plating, arms, and main. cannon attached. The surface armor just clips on over the mechanical struts, and can be removed pretty easily for display of the internals. I'll probably leave it on for now until I get a more dust-free display though.

The markings for this kit are a combination of dry decals and stickers. Unfortunately a lot of the stickers are poorly sized and need to be cut to fit properly on the kit. I also found the dry decals to be really fragile and difficult to work with, and would've preferred waterslides instead.

I ended up leaving most of the dry decals off, and relied on a heavy weathering with gunmetal and silver drybrushing, and some finer wear and tear with the Tamiya weathering pigments (sets D and C).

The main 180mm cannon is nicely detailed, and fits into a rubber gasket polycap on top of the kit, on which it rotates freely as well as pivoting up and down. Unlike the HG Ball, there's no twin autocannon option, or really any optional parts in this kit.

There are PC rubber parts over the ball joint connection the manipulator claws to the body as well, helping to hide the connection and adding a bit of extra realism.

The claws are the only part of this kit that can really be posed, apart from the gun moving and the cockpit opening. The upper claws open and close, and the lower set can swing outwards for larger items or fold backwards and store away underneath the upper arm. They're really nicely detailed, with a metal bar implying a piston and a few exposed red wires on the upper claws.

The kit also contains 3 miniature figures: one pilot and two support crew, which were fun to paint, although the detail is lost at a distance.

The pilot is just barely visible within the cockpit, and really emphasizes how surprisingly large the RB-79 Ball really is. There's a little paintable control screen in front of him, although it can't really be seen once the kit is assembled.

I decided to spruce up the hangar bay base that the kit comes with, as, lacking legs, the kit requires it to be displayed. I've added a warning strip, some fuel lines, and plenty of oil stains and scuff marks, as well as the support crew, idling underneath the collosal mech. I just wish this kit had also included some scale ammunition, which would've looked great on the base as well.

Overall, this was a great introduction to MG kits, and it really makes me want to buy more. If you're looking to start getting into MGs, I definitely recommend this kit, although a 3rd party waterslide decal set might be necessary.

[blip--bloop]

MG Nu Gundam Ver Ka, with the Rage Nucleon backpack, resin parts, and some other bits from my box of extra parts.

Probably my favorite project yet! I LOVE the green, and getting to work with resin parts and 3rd party additions really added to the experience. Now to find somewhere to put it..,,,.,.

[l-crimson-l]

I might have a slight problem

So since my last backlog update I’ve added: Durga I, Sol Raptor, AUV Amaterasu Regalia, Noir, Ilshana, MGEX Strike Freedom

Also I needed to put the Virtue box sideways so you can properly see just how massive that kit is (well not really like size massive but weight massive).

Since then I’ve built: MG Kyrios, HG Calibarn, HG Schwarzette, HG Guntank, 30MS option part set 6, 30MS Luluce (mid progress while I figure out how to make the noir jacket work).

Be warned and stay safe kids. Plastic crack is real.

[searchsystem]

Bandai / Gundam / MG 1/100 Full Armor Gundam Thunderbolt Ver. KA (Custom Build) / Action Figure / 2023

[sylviegunpla]

Amuro Ray gets Cask of Amontillado'd into the MG Ver Ka Hi-ν (SUPPLEMENTAL to: Gunpla: Completed Collection of Minis Part 1: EFSF Alliance)

First we start with the boy:

Then we put him in his little seat:

Then he becomes entombed in The Sphere: (below the cut)

The little sphere sits in the Inner Frame:

and the outer frame gets assembled (and yes i see the decal that has fallen off, such is life; this was before i used Mr. Softer and Mr. Setter)

We can still see him from above

And then the outer armor is complete, and we shut the hatch:

All that's left is The Machine:

Boo!

[bringmygunplatolife]

[tukathewolf]

it took a hot minute but i finally finished my sweet boy. the MG GM is a really fun kit to build. the shoulder and ankle joints are some of the most fun things ive built in a kit so far!

[omegamechanicum]

Manic Monday Model Build at 20:00 BST

It's Monday again which means more sponsored Gunpla.

Me and my co-host ViTheFluffyGunpla are building two kits sent to us by our sponsor GunplaUK.

I will have the MG Narrative C-Packs Ver. Ka and vi will have the HG Shin Burning Gundam.

[kolegaliterat]

MG 1/100 Zeta Gundam ver Ka. 20 lat serii!

Nowy model w mojej kolekcji!

[pmasaojack]

[건프라] 클래식하게 부활한 원점의 제타! MG 1/100 제타건담 Ver.ka 언박싱/MG 1/100 Zeta Gundam Ve...

[fostersffff]

Comical!

I'm in the "comical" phase of gunpla backlog, and wasn't planning on picking up anything new for a while until I can make a dent in it, but my local shop somehow got the G-Self?

I'm a long way off from watching G-Reco but the G-Self really is the Littlest Guy Gundam I've ever seen.

It's incredible that they managed to make a giant robot with static facial features look like this much of a Little Guy.

[athena-gunpla]

MG Ver. Ka. 1/100 RB-79 Ball work in progress

Recently got my first MG kit!!! It's surprisingly light on sprue, being the rather simple RB-79 Ball, but it's a super detailed and intricate kit with a ton of internal mechanical detail.

I won't do a full write up now, but keep an eye out for the final post when I finish this build!

So far I think the coolest part of this kit were the miniature scale figures included. Got to practice some mini painting again.

I also painted a lot of the mechanical detail to really make the kit pop.

[loop-zoop]

Oh yeah btw I finished MG Sazabi Ver Ka the other day

[sylviegunpla]

Gunpla: Completed Collection of Minis Part 1: EFSF Alliance

Here's all the minis i've painted over the past few months!! They are as complete as they're gonna get and also top-coated and everything now. Let's run down the list under the cut! I've also rephotographed them on a matt that has scale, and using a ringlight. Each square on the matte is half-centimeter square, to appreciate the tiny scale of these guys. You'll notice that i have some duplicate figures above. Various people have gifted me some figs, so you can also see the evolution of my mini painting techniques in some of them. Because of tumblr post image limits, i'm splitting this up into multiple galleries. I will start with a gallery of minis associated with the "EFSF" (Earth Federation Space Force) group from the Gundam series.

PG Unleashed RX-78-2: Amuro Ray and Sayla Mass

I've already posted these guys but let's ass some scale, for fun.

I don't have much new to say about these guys, except that they were the first figures i painted in my "second run" of figure painting. I'll go into more detail about this later. I painted them and the others according to the color guide provided in the manual, as best i could. I think Sayla's collar badges could be done better and tbh, i can still fix that. I'll give an update if i do. Anyway, this kit came with TWO pilot figurines that sit inside the core fighter / cockpit. I present to you images of them in their homes:

This also serves as a preview for some parts of the PGU! I don't believe i made a post yet about the final build. I still need to do that, as well as edit the VODs of the build (the painting was also done on camera! ... mostly. I did some touchups off camera). This is the core fighter, and if you want you can put it inside the mobile suit, but there's no reason to. So i prefer to have it displayed outside, because there's a separate "core block" that you can also put inside the gundam, and it also has its own pilot!

Let's move on. I have many more Amuros for you. But first, a diversion! (EDIT: Turns out tumblr posts can only have 30 images at once. I was originally going to put Tobia Arronax here, but then i wouldn't be able to include the full set of EFSF characters here. So go check out the first entry of the part 2 post here: https://www.tumblr.com/sylviegunpla/753409506351939584/gunpla-completed-collection-of-minis-part-2 and then come back to this post)

MG 2.0 RX-78-2: Amuro Ray

This is the civilian outfit Amuro from the MG 2.0 kit. This was one of the "first runs" of minis i painted, i think in Fall 2023. I was convinced i could panel line it and make it look good. Honestly it looks fine at a distance but with the details blown up... well you can see it's a mess. Still, not bad for an early work. The rightmost image is when it was WIP, before being panel lined. TBH that might have looked better if i kept it that way, but you live and learn! This kit also had a pilot outfit figure:

This was also one of my early paints. Here you can see the panel line colors just running wild. I think the civilian outfit has less bleed at least. The helmet is also messy as hell. And as for the pilot that sits in the core fighter... well the actual model kit is currently disassembled for painting, but i can show you the pilot figurine.

Once i finish the MG 2.0 RX-78-2, i'll include an additional picture here. {NOTE TO SELF: INCLUDE PILOT IN COCKPIT PHOTO LATER}

I still have yet more Amuros though! At a local build jam, i've been gifted some minis that people don't want to paint. I got two extra figures of Amuro Ray, that match the sculpt above. I'm not sure if they're from the MG 2.0 or the MG 3.0 RX-78-2, but i referenced the color guide specifically from MG 3.0 for these. I also painted them this year, so you can begin to see the difference. Why not get the extra practice in, ya know? The biggest differences between my old minis and the more recently painted ones are two fold: 1) I started properly thinning my paints (which i did for the PGU figures, they were the first of the "new" line). 2) Eventually, i began using a pair of binocular magnifying goggles i could wear on my head, giving me a better ability to see mini details. I think the difference speaks for themselves:

For the one on top, i did a basic paint with flat coat, no panel lining or anything. Since i had two, why not experiment a bit. THe second one, i coated it in Mr Super Clear Gloss and then used some Citadel Paints Nuln Oil (gifted from a friend who's into warhammer) to achieve the "panel lining" / "shading". I think it turned out okay ultimately. I think the nuln oil works as a better panel liner over the super clear than some other pigments i've used, but it depends on the technique and precision involved. Oh yeah, and all these based were also custom made. Here's all 3 standing together!

Lookit those boys!!

MG Hi-ν (Hi-Nu) Ver. Ka: Amuro Ray

I think he's supposed to be older than in the previous kits here? You can see i opted NOT to panel line this boy... well except the line down his back which imo kinda turned out not that great looking. I probably could have used some nuln oil to highlight some of his facial details and give the impression of having eyes. ANd then here is the pilot figurine:

I'll get pictures of this kit entirely in a separate post, too. Right now the kit is disassembled and i need to re-assemble it. It's not a "WIP" kit, the kit itself is all done, got water slide decals, even has the "Heavy Weapons System" setup. Here, i DID use nuln oil, to try to highlight some of the suit details. I'm not sure if the lighting is blown out here, but it's also accurate to say that the suit details didn't come out as nicely highlighted as i'd wanted them to. Still, he's gonna live inside a clear green plastic sphere once he goes inside, so it won't be easy to see anyway.

BONUS: Watch this boy get Cask of Amontillado'd (and additional pics) I have to admit, sometimes when painting i'm having trouble finding the actual details through a layer of paint. I suspect the Mr. Hobby Aqueous Line may not be as useful for hand painting tiny boys like this, but it's also the set of paints i decided to slowly acquire over multiple years, so it's what i'm using. The Citadel acrylic paints seem to not glob up as much.

MG RB-79 "Ball" Ver. Ka: EFSF Workers

These boys were also among some of my earlier paints in 2023. You can see i globbed up some paint on one of the faces and kinda ruined it. I think the panel lining is mostly okay, but yeah. This kit also didn't have a color guide, so i basically eyeballed the colors. This kit is also one of the ones i have fully disassembled in the process of painting, so the whole build will eventually be its own post too. This thing also has a pilot figurine that lives inside the ball. I took some pictures highlighting the pilot, but i haven't applied decals to the inner ball yet.

However, i did get some duplicates of the standing workers from someone at one of the first build jams i went to! Which i used as an opportunity to just... get more practice, and try to paint these guys again.

Here, i used slightly different shades of yellow and orange. I think the details stand out a lot more. I also used nuln oil here for the shading. I think overall these look a lot better than my first attempt, and i'm rather proud of them. I'll have four workers able to hang out with the Ball once it's completed! This concludes Part 1 of my minis gallery. Continue to Part 2 by Clicking This Link!

[silkburrito27]

If anyone's interested in making their own I put the files up for free on my thingiverse

Here's the final shots for the mg ball fisheye conversion I designed in fusion 360

[filthyneverdie]

MG 1/100 Full Armor Gundam Ver. ka