#inductive sensor market price

[trendingrepots]

Distance Measurement Sensors Market - Forecast(2025 - 2032)

Distance Measurement Sensors can actively check distances, position system parts and monitor other parameters in order to intelligently and independently initiate action and these sensors supply an analog signal representing the distance proportional to the selected sensor’s range. The global Distance Measurement Sensors market in 2017 is valued at $2.5 billion and is anticipated to $2.81 billion by 2023 growing at an estimated value of CAGR of more than 2% during the forecast period 2018 to 2023. North America will dominate the Distance Measurement Sensors Market in the upcoming years with a significant share due to several factors. The penetration of the market is quite high in this category, the presence of several automotive and manufacturing giants is a vital growth causing factors.

𝐑𝐞𝐩𝐨𝐫𝐭 𝐒𝐚𝐦𝐩𝐥𝐞 @ https://bitly.ws/3aerY

Distance Measurement Sensors Market Outlook:

Distance Measurement Sensors Market is segmented by sensing technology, measurement type, application and end user. On the basis of Sensing Technology, the Distance Measurement Sensors Market is segmented in to Laser Diodes, IR LED, Ultrasonic, Capacitive, Inductive, Photo electric, Draw wire, Image sensor and others. Ultrasonic sensors are very widely used in this industry along with laser diodes giving them the edge and making them the largest product segment in this market. On the basis of measurement type, the Distance Measurement Sensors market is categorized in to Laser Triangulation, TOF,  Confocal chromatic imaging, Photoelectric Sensor, Others. On the basis of application, the Distance Measurement Sensors market is segmented in to Automation, Safety Systems, Robotics, Defense aerospace & intelligent, Packaging, Automatic identification, tracking position, automobiles Others. On the basis of end user, the Distance Measurement Sensors market is segmented in to Oil and Gas Industry, Automotive, Military & Defense, Packaging, Consumer Electronics. The global Distance Measurement Sensors market is set to experience a substantial growth owing to the strong demand from Oil & Gas segment across the worldwide.

The current price quoted for Infrared sensors of Distance Measurement Sensors is around $45 to $80 per piece by most manufacturers supplying these sensors. 

[jayanthitbrc]

Global Motor Monitoring Market Overview – Market Growth Analysis And Key Drivers

The Motor Monitoring Global Market Report 2023, provides comprehensive information on the motor monitoring market across 60+ geographies in the seven regions - Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, Africa for the 27 major global industries. The report covers a ten year historic period – 2010-2021, and a ten year forecast period – 2023-2032.

Learn More On The Motor Monitoring Market’s Growth:

As per The Business Research Company’s Motor Monitoring Global Market Report 2023, the global motor monitoring market size is expected to grow from $2.12 billion in 2022 to $2.31 billion in 2023 at a compound annual growth rate (CAGR) of 8.93%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, and affecting many every markets across the globe. The global motor monitoring market size is expected to reach $3.12 billion in 2027 at a CAGR of 7.78%.

Get A Free Sample Of The Report (Includes Graphs And Tables):

Technological advancement is the key trend traction in the motor monitoring market. Major companies operating in the motor monitoring market are focusing on developing new technologies. For instance, in May 2022, TMEIC Asia Pte. Ltd., a Singapore-based company that designs and manufactures induction, synchronous motors, and generators, launched TMASMS, an artificial intelligence (AI) based smart motor sensor. The platform offers high-performance predictive maintenance can be used for electric motors that enables the early prediction of motor failures and contributes to the steady operation of factories and plants by continuously monitoring and analyzing data.

The motor monitoring market is segmented:

1) By Offering: Hardware, Software, Services

2) By Deployment: On-Premise, Cloud

3) By Monitoring Process: Oil Analysis, Motor Current Analysis, Ultrasound, Thermography, Vibration Analysis, Other Monitoring Process

4) By End User: Automotive, Oil And Gas, Metals And Mining, Power Generation, Water And Wastewater Treatment, Food And Beverages, Chemicals, Other End Users

North America was the largest region in the motor monitoring market in 2022.

The table of contents in TBRC’s motor monitoring market report includes:

1. Executive Summary

2. Market Characteristics

3. Market Trends And Strategies

4. Impact Of COVID-19

5. Market Size And Growth

6. Segmentation

7. Regional And Country Analysis

.

.

.

27. Competitive Landscape And Company Profiles

28. Key Mergers And Acquisitions

29. Future Outlook and Potential Analysis

Learn About Us:  The Business Research Company is a market intelligence firm that pioneers in market, company, and consumer research. TBRC’s specialist consultants are located globally and are experts in a wide range of industries that include healthcare, manufacturing, financial services, chemicals, and technology. The firm has offices located in the UK, the US, and India, along with a network of proficient researchers in 28 countries. Through the report businesses can gain a thorough understanding of the market’s size, growth rate, major drivers and leading players.

Contact Us:  The Business Research Company  Europe: +44 207 1930 708

Asia: +91 88972 63534

Americas: +1 315 623 0293

Email: info@tbrc.info

Follow Us On:

LinkedIn: https://in.linkedin.com/company/the-business-research-company

Twitter: https://twitter.com/tbrc_info

Facebook: https://www.facebook.com/TheBusinessResearchCompany

YouTube: https://www.youtube.com/channel/UC24_fI0rV8cR5DxlCpgmyFQ

Blog: https://blog.tbrc.info/

Healthcare Blog: https://healthcareresearchreports.com/

Global Market Model: https://www.thebusinessresearchcompany.com/global-market-model

[rohitpalan]

Driving Profitability: Electronic Toll Collection Market Analysis

The analysts at Future Market Insights (FMI) followed a multidisciplinary approach during the pandemic to study the growth and development of the Electronic Toll Collection Market. The report features insights on the current growth dynamics and the major revenue reforms prevailing in the market as along with the key takeaways over the forecast period 2022 to 2032. The assessment period is anticipated to see a CAGR of 10.5% for the worldwide electronic toll collecting market.

The team of researchers at Future Business Insights are focusing on research and market study to produce different Electronic Toll Collection Market forecasts and predictions at both national and international levels. They have considered several leads of information pertaining to the industry like market figures and merger estimations to assess and produce reliable and informative insights on the Electronic Toll Collection Market.

Request a Sample of this Report @ https://www.futuremarketinsights.com/reports/sample/rep-gb-76

The need to reduce travel time, the availability of cashless transportation, the need to reduce or eliminate traffic congestion, and quick toll transactions are the main factors influencing future growth.

The market for electronic toll collecting is predicted to keep growing quickly in order to keep up with the escalating need for an infrastructure that is better, safer, and more secure. The market for electronic toll collecting offers quick, effective, and reasonably priced services. They include user-friendly buttons that are simple to use.

Due to the fact that these systems do away with the necessity for several toll plazas, which saves money for road operator agencies, they are also advantageous for traffic agencies and businesses. The environment benefits from electronic toll collecting systems because they lessen the quantity of emissions that vehicles generate when they stop and start at manual toll booths.

What is the Segmentation Outlook for the Electronic Toll Collection Market?

Participants in the ETC ecosystem provide a wide range of solutions, including maintenance, payment processing, revenue assurance, software services, system integration, and toll system operations. It is the long-term answer to the issue of reducing traffic congestion.

Transponders, antennae, communication systems, treadles, inductive loops, scanning devices, weigh-in-motion devices, cameras, and film storage devices are some of the product categories that make up the market.

Automatic vehicle identification (AVI), automatic vehicle classification (AVC), back-office & integration, and violation enforcement system are just a few of the subsystems that make up an electronic toll collection system (VES). These subsystems are beneficial for a variety of tasks, including AVI for vehicle identification, AVC for vehicle classification, toll collection transactions by fusing the back-office and payment system, and VES for lowering unpaid tolls through vehicle imaging.

The ETC market can be divided into a number of categories based on technologies, including radio-frequency identification (RFID), dedicated short-range communications (DSRC), video analytics, global positioning system (GPS), and global navigation satellite system (GPS)

Request Customization @ https://www.futuremarketinsights.com/customization-available/rep-gb-76

Key Players

The writer will create content on the general strategies of market players. And then will write the key players in the market are:

Honeywell International,Inc

Transurban

Transtoll Pty Ltd.

Transcore Holdings, Inc.

Toll Collect GmbH

TRMI Systems Integration

Sensor Dynamics

Xerox Corporation

3M

Connect East

EFKON

SAIC

DENSO

Segmentation

The report provides insights on the important highlights and current trends prevailing in the market. This helps the readers to gain a deeper understanding and form an unbiased opinion on the market. Numerous segmentations have been provided for this market based on:

By Product

Transponders Antennae Communication systems Treadles Inductive loops Scanning devices Weigh-in-motion devices Cameras and film storage devices

By Technology

Radio-Frequency Identification (RFID) Dedicated Short-Range Communications (DSRC) Video Analytics Global Navigation Satellite System (GNSS) Global Positioning System (GPS)

By Application

Highway Urban Bridges

By Region

North America Latin America Asia Pacific Japan Western Europe Eastern Europe Middle East & Africa

[lanshengic]

STMicroelectronics won the Vico Cup OFweek2023 Internet of Things Industry Innovation Technology

【Lansheng Technology Information】STMicroelectronics selected ST25R3916B high Performance NFC universal device and EMVCo® card reader won the Chip Technology Breakthrough Award.

The new ST25R3916B NFC reader speeds up payment, consumer and industrial application designs. Optimized for POS terminal applications, the NFC IC is fully EMVCo 3.1a analog and digital compliant, enabling fast EMVCo certification cycles even under harsh conditions such as noise interference from LCD displays around the antenna.

The ST25R3916B solution has advanced features and a versatile design for any payment system requiring fast and reliable NFC technology. Whether upgrading an existing payment terminal or building a new one from the ground up, the ST25R3916B is ideal for ensuring secure and efficient transactions.

At the same time, the NFC wireless charging solution selected by STMicroelectronics - based on NFC/RFID electromagnetic induction technology, can achieve a wireless charging power of more than 500mW with a very small antenna size, and wirelessly charge medical sensors and wearable medical health products. It provides a broad market application prospect, and also won the Outstanding Successful Case Award in the same period of selection.

The NFC wireless charging technology complies with the standard requirements set by the NFC Forum. The advantage is that it can charge the device without using a physical plug, which is very convenient. So far, in the electrical appliance industry, wireless charging has only been realized in a very small number of product areas, and it also requires the use of huge geometric antennas. These technical deficiencies limit the application areas of wireless charging technology, so it cannot be used in small devices with low power requirements (such as earbuds and fitness trackers)

Lansheng Technology Limited, which is a spot stock distributor of many well-known brands, we have price advantage of the first-hand spot channel, and have technical supports. 

Our main brands: STMicroelectronics, Toshiba, Microchip, Vishay, Marvell, ON Semiconductor, AOS, DIODES, Murata, Samsung, Hyundai/Hynix, Xilinx, Micron, Infinone, Texas Instruments, ADI, Maxim Integrated, NXP, etc

To learn more about our products, services, and capabilities, please visit our website at http://www.lanshengic.com

[vividracing]

New Post has been published on https://www.vividracing.com/blog/how-to-add-horsepower-to-your-polaris-slingshot/

How To Add An Easy 11 Horsepower To Your Polaris Slingshot!

Manufactured by Polaris Industries, Polaris Slingshot features a high-end style and performance, while producing 203hp of power and 144 lb-ft of torque. This three-wheeled vehicle is nothing short of an exciting and fun ride that gives the driver and the passenger a front-row seat to the great adventure ahead. If you own a Polaris Slingshot, we have exciting news for you. You can now add up to 11hp to your ride and get the throaty sound that can turn heads on the road, with the Injen SP Aluminum Series Intake Kit for Polaris Slingshot L4-2.0L 2020 – 2023.

The Injen SP Aluminum Series Intake Kit for Polaris Slingshot L4-2.0L 2020 – 2023 comes in three amazing finishes; Wrinkle Red, Wrinkle Black, and Polished. Available in our shop for an affordable price of $394.95, these cold air intake systems are manufactured by an iconic company with more than three decades of reputation in the manufacturing of high-quality air induction products. This means the Injen PS Cold Air Intake System Polaris Slingshot L4-2.0L 2020-2023 was designed by the industry’s top designers and engineers to not only improve your Polaris’ performance but also add some aesthetic value to the Polaris Slingshot.

The SP intake is set apart from the rest in the market by features like a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. In addition to that the intake provides an aggressive and throaty tone giving you power that you can not only feel but also hear. Also, the system has a massive 4.00in O.D. 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. And lastly, this intake system keeps the IAT sensor inside the airflow path for far superior fuel trim calibrations during normal driving, which is something you can’t find from other systems in the market. What’s more important though is the fact the system delivers Dyno Proven gains of up to 11 hp and 9 lb-ft. of torque meaning this intake system provides the added performance that your Polaris Slingshot needs.

Features:

Dyno Proven gains of up to 11 hp and 9 lb-ft. of torque

Mandrel-bent 4.0in O.D. 6061-T6 aluminum intake tubing

The IAT sensor remains in the intake tract and is not relocated to a heatshield like the competition

Includes custom heat shield specifically designed for this application

Short Ram Air Intake Design

Provides power gains while maintaining A/F ratios

No additional tuning required

Fully serviceable Injen SuperNano-Web dry air filter

Available in three amazing finishes

Aggressive engine tone under full throttle

Smooth intake piping eliminates restrictions and improves airflow

Made in Pomona California, USA

Injen Technology Limited Lifetime Warranty

Fitments:

2020-2023 Polaris Slingshot L4-2.0L (All Trim Levels)

CLICK HERE to buy the Injen PS Cold Air Intake System Wrinkle Red Polaris Slingshot L4-2.0L 2020-2023

Buy the Injen PS Cold Air Intake System Wrinkle Black Polaris Slingshot L4-2.0L 2020-2023 by CLICKING HERE

CLICK HERE to buy the Injen PS Cold Air Intake System Polished Polaris Slingshot L4-2.0L 2020-2023

Notes:

This product is not currently CARB-exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

[onosokkiindia]

Understanding and Optimizing the Use of Digital Fuel Flow Meters

Fuel is the most important component in getting a vehicle, piece of machinery, or asset to work properly in the industry. The fuel flow meter is essential for controlling fuel flow and monitoring fuel supply and management.

Because an analogue or manual fuel flow meter is insufficient to provide a precise result on time, most of the industry developed a digital fuel flow meter. This article is about the digital fuel flow meter and its optimization in marketing. But before jumping right into the digital flow meter, first, we need to know what a fuel flow meter is.

An Introduction to Fuel Flow Meters

A fuel flow meter or fuel flow detector is a device that measures the flow rate or amount of fuel being consumed by an engine. These meters are often used in the aviation and auto industries and in industrial settings where fuel is used to power generators or other machines.

Various industries use numerous fuel flow meter tools due to the wide variety of fluids used and transferred in the market. This tool has a numerical display and a digital and mechanical surface. The tool is used in many industries and companies to measure and monitor fuel flow.

Application of Digital Fuel Flow Meters in Different Industries

The most common industry applications are:

Logistics and Transportation: To maintain the density and purity of fuel, which directly improve its efficiency on the road, a fuel consumption meter is used.

Beverages and Food: The food industry requires tools to measure edible oil and check the weight and volume used to produce a portion of food; the industry must use the required tools.

Oil and Gas: This tool is great because it gives precise and accurate results and can evaluate a wide range of petroleum products.

Components of a Digital Flow Meter

A digital flow meter typically includes the following components:

A sensor or transducer that measures the flow of fluid. This can be a turbine, vortex, or ultrasonic sensor.

A microprocessor or electronic circuit reads the data from the sensor and converts it into a digital output.

A display or output device that shows the flow rate, total flow, or other information. This can be a digital readout, a computer interface, or a remote telemetry system.

The sensor and electronic circuit get their power from a power source, such as a battery or an external power supply.

Optionally, an additional device like a flow controller can control the flow rate.

Types of Digital Fuel Flow Meters

There are several digital fuel flow meters, each with unique characteristics and capabilities. Some common types include:

Turbine flow meters use a turbine rotor to measure fluid flow. They are typically used for measuring high-volume, high-pressure fuel flows.

Coriolis flow meters: These meters use the Coriolis effect to measure the flow rate of a fluid. They are known for being very accurate and are often used to measure how much fuel a car uses.

Ultrasonic flow meters: These meters use ultrasonic waves to measure the flow rate of a fluid. They are commonly used for measuring low-flow, low-pressure fuel streams.

Magnetic flow meters: These meters use the principle of Faraday's law of electromagnetic induction to measure the flow rate of a fluid. They are commonly used for measuring low-flow, low-pressure fuel streams.

How to Choose the Right Digital Fuel Flow Meter?

The market is facing high fuel prices, and as many industries' key product is fuel, this necessarily demands digital fuel flow meters. Ono Sokki understands the need for time and is now helping many industries with the different types of fuel flow meter to make their work efficient. It helps in saving time and provides accurate results, which help the industry understand and utilize the fuel efficiently.

Do you need more information? To learn more about choosing the right fuel flow meter for your application, check out the Ono Sokki Fuel Flow Detector.

[madmantechnologies]

Unveiling the Depths: The Revolutionary Era of Deep Search Mines Detectors

Introduction:

Deep search mine detectors are a ray of hope in the global effort to eliminate the threat posed by landmines as technology develops. These detectors have the potential to have a significant and long-lasting effect on the safety and well-being of communities impacted by the scourge of landmines because of their novel features, practical principles, and positive implications. Future advancements in this field of study and development could lead to even more complex and successful solutions.

Delving Into the Depths:

Landmines buried at considerable depths have long been difficult to find using conventional minesweeping techniques. The limitations of these techniques have led to the development of deep search mine detectors, which are outfitted with cutting-edge sensor technologies and can penetrate the earth to previously unheard-of depths.

1. Advanced Sensor Technologies:

Modern sensor technologies such as nuclear quadrupole resonance (NQR), electromagnetic induction, and ground-penetrating radar (GPR) are combined in deep search mine detectors. A thorough and precise subsurface analysis is ensured by this multi-sensor approach.

2. Deep Penetration Capabilities:

Deep search mine detectors offer unmatched depth penetration capabilities, in contrast to their predecessors. Their ability to uncover concealed dangers buried far below the surface gives them a significant edge in the laborious task of finding landmines.

Do you know how does deep search mine detector works?

1. Ground-Penetrating Radar (GPR):

Using high-frequency radio waves, GPR technology creates a detailed subsurface image by sending radio waves into the ground. This enables detectors to identify disturbances in the soil, such as the presence of buried landmines.

2. Electromagnetic Induction:

Detectors that produce electromagnetic fields can detect metallic objects in the soil. This is especially useful in identifying landmines made of metal, enhancing the powers of GPR technology.

3. Nuclear Quadrupole Resonance (NQR):

Using NQR technology, specific nuclear resonances released by substances found in landmines are detected. This extremely selective method helps to improve overall detection accuracy by reducing false positives.

Conclusion:

In the era of deep search mines detectors, the vision of a world free from the shackles of landmines is becoming increasingly tangible. These sophisticated devices, with their advanced sensor technologies and deep penetration capabilities, herald a new era in demining—a safer, more accurate, and more efficient era. As we embrace this technological evolution, we move closer to creating a world where the scars of conflict are healed, and communities can thrive without the looming threat of buried dangers.

Deep search mine detectors are a ray of hope in the global effort to eliminate the threat posed by landmines as technology develops. These detectors have the potential to have a significant and long-lasting effect on the safety and well-being of communities impacted by the scourge of landmines because of their novel features, practical principles, and positive implications. Future advancements in this field of study and development could lead to even more complex and successful solutions.

Madman Technologies is coming up huge in the area of Government Tactical Product Portfolio that can help you both in the design consulting and best services, also they can arrange the best deal price in the market and make the product available for you.

For any further queries and details email us at —

madmantechnologies{dot}ai{at}gmail{dot}com

Contact information:- 9625468776

[latestmarketblogupdates]

Inductive Sensor Market

An inductive sensor is a type of non-contact electronic proximity sensor that is used to detect the position of metal objects. The sensing range of an inductive switch is dependent on the type of metal being detected. Ferrous metals, such as iron and steel, allow for a longer sensing range, while nonferrous metals, such as aluminum and copper, can reduce the sensing range by up to 60 percent. Since the output of an inductive sensor has two possible states, an inductive sensor is sometimes referred to as an inductive proximity switch.

Request Sample

The sensor consists of an induction loop. Electric current generates a magnetic field, which collapses generating a current that falls toward zero from its initial trans when the input electricity ceases. The inductance of the loop changes according to the material inside it and since metals are much more effective inductors than other materials the presence of metal increases the current flowing through the loop. This change can be detected by sensing circuitry, which can signal to some other device whenever metal is detected.

Common applications of inductive sensors include metal detectors, traffic lights, car washes and a host of automated industrial processes. Because the sensor does not require physical contact it is particularly useful for applications where access presents challenges or where dirt is prevalent.

Inquiry Before Buying

This report identifies the global Inductive Sensor market size in for the year 2014-2016 and forecast of the same for year 2021. It also highlights the potential growth opportunities in the coming years, while also reviewing the market drivers, restraints, growth indicators, challenges, market dynamics, competitive landscape and other key aspects with respect to global Inductive Sensor market.

Geographically, North America is a key market for inductive sensors. Industrialization in developing countries of Asia Pacific is estimated to drive the growth in this region. Asia-Pacific is estimated to witness the highest growth during the forecast period and North America is estimated to hold the highest share in Inductive Sensor market.

Schedule a Call

This report segments global Inductive Sensor market on the basis of type, application, and regional market as follows:

Global Inductive Sensor Market, by Type: Fixed Distance and Adjustable Distance Global Inductive Sensor Market, by Sensing Range: 0 mm to 20 mm, 20 mm to 40 mm & Greater than 40 mm Global Inductive Sensor Market, by Application: Aerospace & Defense, Automotive, Industrial Manufacturing, Food & Beverage, Pharmaceuticals, Consumer Electronics & Building Automation This report has been further segmented into major regions, which includes detailed analysis of each region such as: North America, Europe, Asia-Pacific (APAC) and Rest of the World (RoW) covering all the major country level markets in each of the region.

Buy Now

Sample Companies profiled in this Report are:

Pepperl + Fuchs GmbH Sick AG Omron Corporation IFM Electronic GmbH Schneider Electric Se 10+.

[yaorong]

What factors need to be considered when purchasing UFO high bay lights?

UFO high bay lights play an important role in the application of different environments and are widely used in various industries. Because of its many advantages and characteristics, many customers in need have started, but it is still necessary to pay attention to all aspects of factors that must be considered when purchasing UFO high bay lights? The following is a detailed analysis of professional UFO high bay light manufacturer Yaorong Technology:

1. Lighting use

Before purchasing this UFO high bay light, customers should consider their daily lighting needs and understand their operating environment and use. For applications in the chemical, coal and petroleum industries, they should pay more attention to the explosion-proof and dust-proof of UFO high bay lights. In order to purchase UFO high bay lights that are more suitable for the environment where the product is located and meet the requirements of national quality standards.

2. Manufacturer selection

When purchasing UFO high bay lights, you need to consider the choice of manufacturers. Try to choose a manufacturer with a long established time, rich experience and strength, which is responsible for your products. Because the LED lighting industry is ushering in a new round of development opportunities, many businesses have poured in, resulting in insufficient experience and inferior products, so the choice of manufacturers is very important.

3. Cost-effective

When purchasing UFO high bay lights, it is necessary to comprehensively consider the cost-effectiveness, instead of only considering its price factor unilaterally. Since high-quality UFO high bay lights are relatively reliable in terms of their price and performance, they will also save for their daily use. Certain electricity bills and maintenance and replacement costs.

4. Power

Nowadays, manufacturers often falsely indicate false power on the market. For novice buyers, of course, it is impossible to tell whether the label is true or not, but as long as the UFO high bay light is connected through an electric energy meter, the actual power of the lamp can be seen. Virtual standard power may cause insufficient illumination of UFO high bay lights, so it will actually affect normal lighting and affect people. If you want to avoid this problem, you must choose a reliable brand of lamps.

5. Light effect

Different places of use have different requirements for contrast. Places such as workshops, stadiums, libraries, etc., require high illuminance. Places such as warehouses and parking lots have low illuminance requirements. Therefore, pay attention to the use of places and The light effect you want to achieve, in addition to the height of the installation space, the light-emitting angle and the density of the lights, this is also the place to pay attention.

6. Chips, power materials

First of all, what brand of chips are used in UFO high bay lights? Imported first-line brands have the characteristics of high light efficiency, long service life, low light attenuation and good stability. Secondly, look at the power supply of the UFO high bay light, which will affect the life of the bulb, and look at the material of the lamp housing. The imported pure aluminum heat sink is large, and aluminum is naturally used. Only the materials used can guarantee the heat dissipation effect of the lamp.

7. Heat dissipation

Look at the material and type of the UFO high bay light radiator to choose. Generally speaking, if the purity of the aluminum material used is higher and the area of the heat sink is larger, then the UFO high bay light has a better heat dissipation effect, and the UFO high bay light with poor heat dissipation The high temperature may be generated in less than a few hours of operation, and the temperature rise caused by the undissipated heat will continue to affect the use of other accessories.

8. After-sales service

The after-sales service of UFO high bay lights is still very important. The quality assurance of UFO high bay lights will directly affect your input cost for several years. Some manufacturers have less warranty years. Then you have to find it yourself if there is a problem with your UFO high bay light. It is recommended to find a manufacturer with a warranty of more than 5 years to solve the problems related to after-sales service.

Technical characteristics of UFO high bay light:

1. Bionic fins for heat dissipation. The shape imitates the UFO shape design, the shell is made of high thermal conductivity die-cast aluminum, and the bionic fin convection integrated lamp body heat dissipation design is not only good-looking, but also the heat dissipation is leveraged.

2. PC anti-ultraviolet ring aperture design for light transmission. Using PC material, there is very little change under high temperature conditions. The anti-UV experiment ensures that the color does not change when used indoors and outdoors.

3. High light efficiency. The whole lighting effect is ≥130lm/W. The ring-shaped arrangement, branded lamp beads and drivers are optional to meet the needs of different customers.

4. Intelligent induction. Intelligent sensor module, the sensor module setting is turned on, the lights are on when people come, and the brightness is adjusted to 100%. The lights are kept for 30 minutes after the people walk. After the people walk for 30 minutes, they will automatically turn off if no objects move. Intelligent dimming and microwave induction configurations are optional.

5. High protection. The IP65 protection level is suitable for use in high dust and high water vapor environments. The use of silicone rubber seals ensures that the product can be used in harsh environments such as high dust and water vapor.

6. Free choice of light distribution and installation. We have a variety of installation methods such as 60°, 90°, 120° light distribution angle, ring type, U-shaped bracket, etc. Different light distribution angles and installation methods can meet your needs.

Through the above suggestions, people should pay attention to its comprehensive factors when purchasing UFO high bay lights, so that UFO high bay lights can meet the requirements of use in the application environment and ensure the lighting effect.

[rupayan80]

How to choose a good microwave oven

The power of the microwave

If reheating your dishes quickly is your first choice, know that the vast majority of devices tested do the job well, and even very well. There is therefore little difference between an oven with a power of 900 W and one of 1200 W.

That said, the majority of ovens offer power levels from 1 to 10. At 1, the appliance operates only at 10% of its capacity, while at 10, it provides 100% of its power. For our test, we compared microwaves at maximum intensity.

In general, manufacturers recommend using the high levels (8, 9, and 10) for reheating foods that contain a lot of water, such as soups, drinks, and most vegetables. The low intensities, from 1 to 4, are useful for slightly reheating a dish - which would have become lukewarm, for example -, softening butter or gently defrosting food. Of course, the higher the intensity selected, the faster the food will heat; watch your dish to prevent it from overheating!

The interior and exterior volume

If you have little counter space, pay attention to the dimensions of the appliance that interests you. The difference in width between the tested models can be up to 8 cm; height, 6 cm; and depth, up to 13 cm! Two or three centimeters can make all the difference in your choice; be sure that the chosen oven will fit in the space provided in your kitchen.

Also, it is possible to put a large plate in all the ovens evaluated, but it will be less easy to fit into a small capacity model and to be removed from it.

With or without humidity sensor

Are you tempted by a model with a button (sometimes called sensor reheat or sensor cook in English) that eliminates the need to select the duration and intensity of cooking? This function activates a sensor designed to detect the moisture given off by food throughout the heating cycle and adjusts the cooking time accordingly. The goal is to provide you with a dish that is not overcooked. Be careful, however: do not open the door before the time is displayed, otherwise, the program will be canceled. Also, in order not to generate additional humidity, the container, the tray, and the cavity of the microwave oven must be dry.

So, essentially, this cooking sensor? We are not convinced of that. In some cases, the time set by the appliance was too long, resulting in dishes that were much too hot. Result: you will have to wait for your meal to cool before eating it… which negates any time savings! In short, you can play the role of the sensor yourself by choosing the power recommended in the instruction manual, stirring the food halfway through cooking, and checking the temperature of your dish periodically.

The pre-programmed functions

If you find it tedious to choose the length and intensity of cooking, you will certainly appreciate the “quick add” button. Just press it several times to obtain the desired cooking time. The Danby, RCA, and Everyday Essentials models we tested are the only ones that don't have this button.

The “automatic defrost” function, which is available on all devices, is also very practical. Follow the indications given in the instruction manual and watch the work in the specific case of the meat, which risks cooking.

All models tested have a child safety device that, when activated, locks the buttons on the device. On most models, you must press the "on / off" button until an indication appears on the display and a beep sounds.

The price

Our three "best choice" have volumes of 1.5 and 1.6 fit 3 and are $ 200, respectively, $ 280 and $ 400. We also found two "good choices" for $ 100, but they are smaller (0.9 and 1.1 fit 3) and devoid of the "humidity sensor".

How does a microwave oven work?

The microwave may have been part of the decor for many years, but its operation remains a mystery to many people. Unlike the cooker - which works with electric, gas, or induction heating elements - the microwave oven uses the energy of electromagnetic waves to heat food. These microwaves are generated in the magnetron and then pass through a waveguide to a stirrer, which propagates them in the oven.

The waves thus penetrate directly into the food, or after having bounced off the walls of the appliance. The energy absorbed by food causes the water molecules to oscillate and rotate, which produces heat and cooks the food.

What is a magnetron?

This device is an energy generator that was originally found in radar. It was in 1945 - during work carried out for the army on these devices - that the American engineer Percy Spencer, of the Raytheon Company, discovered that a candy bar had melted in his pocket. He, therefore, looked into the reason for this phenomenon and undertook several tests to arrive at the development, in 1947, of the radiance, a microwave oven intended for industrial use. It was not until 20 years later, in 1967, that the Amana Company marketed the first device intended for home use.

Should you wait before eating a meal that comes out of the microwave?

Yes, simply to allow the temperature of your dish time to become uniform. Most instruction manuals prescribe a two to three-minute wait. In the case of a soup, for example, this will prevent you from burning yourself!

Does a microwave use less energy than a stove?

According to Energy Star, the microwave oven consumes up to 80% less energy than a traditional stove. Consider using it effectively, for example by reheating small portions of a dish or by defrosting meat only occasionally, when you don't have time to do it in the fridge. Also, do not overheat your dishes; stir food halfway through cooking so that the heat accumulated around the pan disperses evenly.

Can the microwave cause interference?

Yes. The microwave oven may interfere with radio, television, cordless phone, or router signals. If this happens to you, move your microwave oven away from sources with which it is interfering. Also, do not plug devices that may be touched into the same outlet you use for the microwave.

Do you have a pacemaker? The operation of some of these slightly older devices may be affected by a microwave oven, but this is no longer the case with newer pacemakers. See your doctor if you are worried about this.

[itcars]

Details: The New Audi A3 Sedan

The second generation of an Audi success story is here – the A3 Sedan. The compact four-door model is digitally and fully connected – from the infotainment through to the assist systems. Beneath the body, new drives and refined suspension tuning ensure a driving experience that is as efficient & dynamic. 

Powerful and elegant: The exterior The front is dominated by a large Singleframe with honeycomb grille that is flanked by striking headlights. On the outside, they form trapezoidal angles that are drawn downward. In the top model with Matrix LED technology, this is where the new digital daytime running lights are housed. They consist of a pixel array made up of 15 LED segments that can be actuated individually and give the various versions of the A3 Sedan a specific signature.

With the A3 Sportback, the body line running above the sill rises towards the rear lights before the rear wheel arch, thus accentuating the short rear end. The body line on the Sedan, by contrast, extends up to the rear bumper. This emphasizes its length – 15 centimeters (5.9 in) longer than the Sportback – and gives the flank an elegant appearance. The concave surface under the broad body shoulder further accentuates the quattro blisters and the sill. This creates an intensive play of light and shadow. The roof line slopes down from the B-pillar dynamically – just like on a coupé – and finishes in a striking spoiler on the tailgate. Optionally available in carbon, this provides a visual accent and, in so doing, emphasizes the powerful appearance of the four-door model.

Streamlined body The aerodynamics benefit from the higher rear end compared with the predecessor as well as the large diffuser. As a result, the new A3 Sedan with the 2.0 TDI 110 kW (150 PS) achieves a Cd value of 0.25 and is therefore 0.04 Cd points better than the first generation. The controllable cooling-air inlet with two electrically actuated louver modules behind the Singleframe also contribute to this. They regulate the flow of air intelligently and according to the situation. In addition, the paneled underbody, the exterior mirrors with improved aerodynamics, and the active brake cooling reduce air resistance and make for a streamlined vehicle.

Focused and digitalized: The cockpit The cockpit of the A3 Sedan is entirely focused on the driver. This begins with the interior design and ends with the display and control elements. Thus, the instrument panel with the central MMI touch display is inclined slightly toward the driver. It has a 10.1-inch diagonal and is intuitive to operate. As standard, it includes handwriting detection as well as natural language control that can optionally draw on the capabilities of the cloud. The 10.25-inch instrument cluster behind the steering wheel is digital even in the basic model. As the Audi virtual cockpit plus, it measures 12.3 inches and offers three different views, including sporty graphics with inclined digits and a particularly dynamic layout. The RPM and speed are shown here as bar diagrams with angular red graphical elements. Upon request, a head-up display complements the display concept, whereby it projects important information onto the windshield in the driver’s direct field of vision. Highly connected: From infotainment to driver assistance The top infotainment system in the new A3 Sedan is the MMI Navigation plus, which uses the third-generation modular infotainment platform (MIB 3). The MIB 3 boasts computing power ten times higher than in the predecessor model, connects the car via LTE Advanced speed, and connects the smartphones of the passengers to the Internet via Wi-Fi hotspot. The MMI Navigation plus offers a multitude of Audi connect services as standard, including online traffic information, news, and additional information such as photos, opening times, and user reviews relating to points of interest.

Car-to-X services that make use of the swarm intelligence of the Audi fleet are also part of the portfolio. They report hazardous areas or speed limits, for example, to vehicles with the corresponding equipment or find free parking spaces at the side of the road. If the car is switched off, the myAudi app continues navigation from the car on a smartphone. This way, customers reaches their destination directly.

The A3 Sedan is also connected to the smartphone via the Audi smartphone interface, which integrates iOS and Android cell phones with Apple Car Play and Android Auto in the MMI, as well as via Audi phone box. The latter connects the device to the car antenna and can charge it inductively. What is more, the A3 Sedan can be locked and unlocked as well as started via an Android smartphone with the Audi connect key. Personalization allows up to six users to store their preferred settings in individual profiles, including those for the seat, climate control and media. The DAB+ digital radio comes as standard. Options include online radio and the hybrid radio, which automatically switches between FM, DAB, and the online stream depending on a station’s signal strength, thus ensuring optimum reception. Beginning in the middle of the year, the Amazon Alexa voice assistant will complement the offering.

The driver assist systems are also particularly effective thanks to the close networking. In the Audi pre sense front system, the camera behind the interior mirror works together with the front radar to prevent accidents, or at least reduce their severity. The standard collision avoidance assist also uses the data from this sensor system. Adaptive cruise assist, an innovation from the full-size class, supports drivers with longitudinal and lateral guidance. The efficiency assist notifies them when it would be sensible to take their foot off the accelerator. To do so, it evaluates information including the navigation data. The exit warning, the cross-traffic assist and the surround view cameras that will follow shortly after the market launch are also useful in in urban traffic.

Three engines at ramp-up: The drives

The new A3 Sedan is available with a choice of two TFSI engines and one TDI engine at launch. One thing they all have in common is high efficiency. The 35 TFSI, a 1.5-liter direct injection engine, produces 110 kW (150 PS) and is available in two versions – with a newly developed six-speed manual transmission (combined fuel consumption in l/100 km: 5.0 – 4.7 (47.0 – 50.0 US mpg)*; combined CO2 emissions in g/km: 114 – 108 (183.5 – 173.8 g/mi)*) and with a quick-shifting seven-speed S tronic (combined fuel consumption in l/100 km: 4.9 – 4.7 (48.0 – 50.0 US mpg)*; combined CO2 emissions in g/km: 113 – 107 (181.9 – 172.2 g/mi)*).

Besides the cylinder on demand technology, the powertrain in conjunction with the S tronic dual-clutch transmission uses a 48-volt mild hybrid system. It recovers energy during deceleration, supports the engine with up to 50 Nm (36.9 lb-ft) of torque when driving off and accelerating from low engine speeds and allows the A3 Sedan to coast with the engine switched off in many situations. In everyday driving, it reduces consumption by up to 0.4 liters (0.1 US gal) per 100 kilometers (62.1 mi).

The 2.0 TDI with 110 kW (150 PS) (combined fuel consumption in l/100 km: 3.9 – 3.6 (60.3 – 65.3 US mpg)*; combined CO2 emissions in g/km: 101 – 96 (162.5 – 154.5 g/mi)*) also works in conjunction with a seven-speed S tronic, whereby gear shifts are performed via a new switch using shift-by-wire technology.

Comfortable and dynamic at once: The suspension The suspension of the new A3 Sedan has been tuned to be sporty and harmonious – a touch more precise than in the predecessor model. To a large degree, this precision and reaction speed is thanks to the central dynamic handling system that ensures optimal interaction between all the components relevant to the transverse dynamics. As an alternative to the standard setup, there is a sport suspension and a suspension with controlled dampers. The latter offers a wide spread between highly comfortable roll motion and agile handling. The Audi drive select dynamic handling system also allows the driver to experience different levels of suspension tuning in their A3 Sedan – from comfort-oriented and distinctly dynamic right through to particularly fuel-efficient. This also brings about changes in the characteristics of the throttle response and the progressive steering, for example, which varies its ratio depending on the steering angle.

Prices and market launch Presales of the new A3 Sedan will begin at the end of April 2020 in Germany and many other European markets. Deliveries will commence in the summer. Prices for the 35 TFSI with 110 kW (150 PS) start at EUR 29,800. Shortly after the market launch, an entry-level gasoline engine will follow with a list price of EUR 27,700.

[vividracing]

New Post has been published on https://www.vividracing.com/blog/top-5-best-intake-systems-for-the-toyota-tundra/

Top 5 Best Intake Systems for the Toyota Tundra

The Toyota Tundra has mastered the familiar motto of “work hard, play hard.” Built in the heart of truck country (San Antonio, Texas), the Tundra can handle everything from a tedious daily commute to long road trips and trail adventures. Led by its available 5.7-liter i-FORCE V8 engine that has a towing capacity of up to 10,200 pounds and a max payload of 1,730 pounds, Toyota’s full-size pickup truck is ready and able to tackle anything that comes its way. The standard 4.6-liter i-Force V8 has an output of 310 horsepower at 5,600 rpm and 327 pound-feet of peak torque at 3,400 rpm. The popular 5.7-liter version delivers 381 horsepower at 5,600 rpm and 401 pound-feet of peak torque at 3,600 rpm.

If you are looking to amp up those numbers a bit without breaking the bank, upgrading the stock air intake system may be on your radar. Swapping out your truck’s stock restrictive air intake system will help your Tundra breathe in more air at cooler temperatures to have it running even better. Aside from improved airflow, you will also experience power gains, an enhanced soundtrack, and added underhood styling to boot. For the price point, you certainly cannot beat it and it’s no wonder why so many enthusiasts look to the aftermarket for a new air intake system as one of their first mods. 

We have compiled the following list of the top 5 best intake systems for your Tundra to help you along. Keep in mind that these are in no particular order but are based on factors like power gains, filtration properties, overall construction, and ease of installation. You can also browse our entire inventory of air intakes right here to see which may be the best fit for you. If you have any further questions, please reach out to us by phone at 1-480-966-3040 or via email at sales@vividracing.com. 

1. aFe Momentum GT Cold Air Intake System

·        

  The air induction experts over at aFe (advanced FLOW engineering) know what it takes to manufacture a high-quality, high-performing air intake system. aFe’s Momentum GT series are designed and tested around the specific performance needs of gas vehicle applications. The Momentum GT series focuses on specially engineered intake systems that utilize a smooth one-piece housing that keeps hot engine air out for maximum performance. The system uses a unique patent-pending filter-to-housing interface that enables the use of the largest filter possible for optimal results. The housing is constructed of heat-resistant cross-linked polyethylene (XLPE) with an innovative design that minimizes the number of parts used to streamline the installation process.

This system also features a computer-designed, dyno-tuned intake tube that has been tested and proven to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable to stand up to the elements of both daily driving and off-road driving. The CAD-designed intake tube provides the largest cross-section possible to reach maximum volumetric flow rate and unleash the potential horsepower and torque of your Toyota Tundra. This cold air intake includes a 9-inch tall 360-degree radial flow air filter featuring aFe’s pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media to provide your Tundra engine with the biggest amount of high-flowing air to deliver up to 20 horsepower and 33 pound-feet of torque.

Features: 

Dyno-Proven Gains up to 20 hp and 33 lb.-ft. of Torque

Outflows Factory Intake by 38%

Measured Flow: 241 CFM @ 1.5″ H2O

Durable XLPE Construction and Sealed Housing

CAD-Designed Roto-Molded Intake Tube

One-Piece Sealed Housing with Auxiliary Air Scoop

Protects from Impact, Extreme Temperatures, and Other Elements

Unique (Patent Pending) Housing-to-Filter Interface for Easy Installation

Washable and Reusable Pro 5R Air Filter for Maximum Performance

Clear Sight Window for Convenient Filter Inspection Without Disassembly

Learn More and Get It Here.

2. K&N Performance Cold Air Intake System

K&N’s Series 77 Cold Air Intake Systems eliminates air path restriction from the stock system by replacing the air filter and entire path to the engine with a high-density polyethylene (HDPE) roto-molded intake tube. The aerodynamically engineered intake tube drives a larger volume of air into your Tundra’s engine to deliver enhanced performance in addition to horsepower and torque gains. Each system is paired with a washable, reusable high-flow air filter featuring oiled cotton media. The oversized conical filter is composed of red cotton gauze media that captures more dirt and lets drivers go up to 100,000 miles between filter maintenance under normal highway driving conditions. What’s more, a custom heat shield or airbox is incorporated to help protect your vehicle’s air intake from the high temperatures of the engine bay.

Be it on the streets or the trails, the K&N Performance Cold Air Intake will deliver a boost in your truck’s overall power figures, while also providing better throttle response, added underhood styling, and an attractive sound to go along with it. Crafted from the highest-quality materials for ultimate longevity, you can count on K&N to offer a system that is meant to last. Mandrel-bent tubing allows for less restrictive airflow so your Tundra can breathe better and perform to its potential. With a solid aluminum intake tube, this CAI is able to withstand extreme underhood conditions without failing or breaking. This system offers a full bolt-on installation so you can easily and directly mount this cold air intake onto your vehicle’s factory mounting points in place of the restrictive factory one.

Features: 

Guaranteed to Increase Horsepower and Torque

Mandrel-Bent Aluminum Intake Tubing

Oversized Oiled Red Cotton Gauze Air Filter

Provides Improved Airflow and Exceptional Filtration

Improved Engine Sound for a Sportier Appeal

Replaces Factory Air Filter and Intake Tube

Filter Only Requires Cleaning Every 100,000 Miles

Straightforward Installation Process

10-Year/Million Mile Limited Warranty

Learn More and Get It Here.

3. Injen EVOLUTION Cold Air Intake System

The EVOLUTION cold air intake system from Injen will crank up the power of your Toyota Tundra in a complete, easy-to-install package that will deliver exceptional power figures, added underhood styling, and an aggressive growl to boot. Injen’s EVOLUTION sealed air intake systems were designed using the latest state-of-the-art engineering tools and methods to build the finest-quality kit that is unmatched on the aftermarket. In fact, Injen Technology designed and produced the world’s first tuned air intake system and holds four patents on the tuning process of an intake system – something no other manufacturer can claim. Such allows all of its air intakes to deliver proven horsepower and torque gains right out of the box without the need for expensive tuning. What’s more, the dyno-tuned intake tube funnels air at a precise rate past the MAF sensor so you don’t have to worry about check engine lights. 

The EVOLUTION Cold Air Intake System features a one-piece sealed housing that utilizes Injen’s patent-pending Twist-Lock technology to securely fasten the 8-layer oiled cotton gauze air filter in place. It also features a clear-view window so you can seamlessly inspect the air filter in between trips. The clear-view badge has a bold red stripe on it with a white Injen logo that really pops when you open your Tundra’s hood. Injen’s special technology has allowed its technicians to use the largest air filter available, which enhances the air volume and consequently results in increased power gains. Dyno tests show that this cold air intake will deliver an additional 14 horsepower and 13 pound-feet of torque for your Toyota truck. Installation is super simple as this system offers a reliable fit and was designed with fewer parts to provide the end-user with one of the swiftest, most manageable installations on the market.

Features: 

Dyno Proven Gains of up to 14 hp and 13 lb-ft. of Torque

Designed to Work with the Stock Calibration

Aggressive Intake Growl under Acceleration

Injen Clear-View badge for Simple Air Filter Inspection

Durable Roto-Molded Polyethylene Housing and Intake Tube

Reinforced Automotive-Grade Silicone Souplers

Fully Serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter

Stainless Steel Band Clamps with Inner Protective Liner

Aggressive Underhood Appearance while Maintaining OE Fitment

Learn More and Get It Here.

4. Flowmaster Delta Force Performance Air Intake

Amp up your Toyota Tundra’s power figures with the Flowmaster Delta Force Performance Cold Air Intake.  Flowmaster is well-known for offering air intakes that not only provide proven results, but also spotlight a sleek streamlined design that adds styling to your engine bay for a more customized look. The Delta Force system features custom roto-molded black cross-linked polyethylene (XLPE) high-flow intake tubing with black anodized fittings (when applicable), high-quality reinforced silicone couplers, and all stainless-steel hardware. Each and every component was strategically engineered to benefit “operation cool” and ensure your truck gets better airflow at lower temps. Installation is super simple, as no cutting or drilling is required, and there is no need for any tuning once it’s on. 

Flowmaster’s Delta Force series delivers the next step in attaining maximum performance and efficiency for your truck. This air intake system will provide your Tundra with up to five percent more horsepower and torque over stock while also reducing any heat soak. It features a large diameter high-flow conical-shaped 8-layer cotton gauze air filter, which captures more dirt than typical 6-layer designs. This intake also has a custom-fit black powder-coated air dam with attachment brackets to securely mount the system in place with soft bumpers to eliminate any metal-to-metal contact under the hood. If you are serious about quality and performance, then the Flowmaster air intake system will check all the boxes while looking good doing so.

Features:

Serviceable Lifetime High-Flow 8 Layer Cotton Gauze Filter

Cross-Linked Polyethylene (XLPE) High-Flow Intake Tube

Serviceable with our Delta Force Cleaning Kit

High-Quality Components with Custom Look

Includes All Necessary Mounting Hardware

No Cutting or Drilling for Easy Installation

Power Gains of Up to 5 Percent HP and TQ

XLPE Intake Tube Resists Heat Soak

No Special Tuning Required

Learn More and Get It Here.

5.  AIRAID Performance Air Intake System

  The AIRAID Performance Cold Air Dam (CAD) Air Intake System is specifically engineered to give your truck’s engine larger amounts of cooler air. By letting your engine breathe in better, cooler, and larger amounts of air, you are simultaneously unleashing its potential power in the form of increased horsepower and torque figures. AIRAID performance air intake systems feature an aerodynamically designed intake tube that accelerates airflow to your engine and reduces turbulence, thus helping increase your vehicle’s overall performance. This intake system retains the original location of your Tundra’s stock air filter but delivers a big boost with the addition of an open-element air inlet protected by the Cold Air Dam panels, which act as a heat shield to protect intake air from engine bay heat. This provides a steady free-flowing supply of cooler air from outside into your engine so that your truck gets the coolest air possible for optimal results. 

The AIRAID CAD-designed intake system for the Toyota Tundra utilizes a replacement low-restriction intake tube with a 360-degree conical premium air filter. This high-performance air filter is both washable and reusable as well as less restrictive than traditional paper filters and better at filtering the elements. The dry synthetic SYNTHAMAX air filter captures contaminants better than the stock Tundra filter and provides top-quality protection to keep your ride running healthier than before. AIRAID performance intake systems are engineered to provide a smooth, unimpeded path for airflow to your engine in a simple-to-install package that helps maintain proper air-to-fuel ratios. There is no need for any recalibration. Just bolt it on and be on your way!

Features: 

Increased Horsepower and Torque

Provides Super Filtration Properties

High-Performance Reusable Filter

Cold Air Dam Panels Block Out Hot Engine Air

Easy-to-Clean Oil-Free Synthetic Air Filter

Replaces Stock Air Box, Filter, and Tubing

Simple Installation Process Using Basic Tools

Washable and Reusable Air Filter Media

No Hassle Lifetime Warranty

Learn More and Get It Here. 

[jamesliamme]

realme C12 Review with Price in Bangladesh

Bangladesh, Oct. 27 -- Every month new phones are hitting the market with advanced features and smarter designs. But only a

few brands can keep the balance between the quality and price range. The trend-setter Smartphone

manufacturing company realme has acquired huge reputation among the mobile-enthusiasts for

offering quality phones with reasonable price-tags. In this legacy, realme has launched its latest

innovation realme C12 on the 26 th October, 2020. Stay with us to read the full review of realme C12

with its price in Bangladesh.

realme C12: Review of Key Features

Massive 6,000 mAh Battery

What makes realme C12 out-win the pricier competitors is its staggering battery power. realme shook

the world by offering an incredible 6000 mAh battery in its latest C12 Smartphone. It would be certainly

helpful for the users who would like to use this gadget for participating online classes/virtual meetings,

watching full movies/ TV series, playing high definition virtual games, doing social media lives, or many

more things.

More specifically, on a full charge, the realme C12's 6000mAh battery can support call time for 46 hours,

or PUBG gaming for about 10 hours, or YouTube video streaming for 28 hours, or music play for 60

hours. What is more? realme C12 promises about 57 days of standby support.

It often happens that the unused apps drain the battery of phones. Thanks to realme for providing C12

with the 'Quick App Freeze' app that assists in preserving battery life by closing with idle apps after

crossing the pre-specified time boundary. Furthermore, realme C12 is blessed with the 'Screen battery

optimization' feature that can slightly downgrade the resolution and display effects with the purpose to

extend the battery strength.

The box includes a 10W charger that supports reverse charging. On the moment of necessity, you can

utilize this phone as a power bank to charge up other phones via USB cables. What else you need?

Superb Nightscape AI Cameras

Nowadays, most of the consumers bear high expectation on the camera section while choosing any

Smartphone. The realme phones come with smart camera configuration and the latest C12 keeps up

this tradition. In this realme Smartphone, you get a triple AI rear camera setup including a 13MP

primary rear sensor, 2MP B&W and 2MP macro lens. On the front side, there is a 5MP selfie camera.

Its 13MP prime rear sensor featuring f/2.2 aperture can take decent photos under ample light

conditions. However, using the provided NightScape mode, you can improve the quality of photos

captured in low light situations. Moreover, this prime camera is bestowed with a 4X zooming capacity

that facilitates in taking lucid shots from long distance. It is a blessing for the amateur photographers.

The 2MP black-and-white portrait lens with f/2.4 aperture is capable of providing higher exposure while

detecting the edges of main subject correctly. This sensor also makes out brilliant contrast between the light and dark colors. And its 2MP macro lens bearing f/2.4 aperture aims to capture clear photos of tiny

objects. This 4cm sensor can cherish your desire for macro photography.

While taking snaps with rear camera series, you can apply the wonderful photographic features, such as

Portrait, Beauty, Expert, filter, HDR, Slo-mo, panoramic view, Time-lapse, etc. Speaking of the overall

image quality, the realme C12 does a great job considering its price range.

Now turning to the front screen of realme C12, you would find a 5MP selfie camera featuring f/2.4

aperture and 3p lens. This sensor takes attractive photos in adequate light conditions. The provided

creative photography functions including Portrait, Beauty, filter, panoramic view, Timelapse and HDR

would facilitate you in capturing versatile photos.

Despite being a highly affordable Smartphone, realme C12 can be used for shooting video clips. You can

shoot up to 1080p footage at 30fps. This phone also supports 720P slo-mo video shooting at 30fps. This

phone's video shooting option is enriched with a bunch of handy functions like panorama mode, HDR,

time-laps, etc. If you have a passion for video-graphy, realme C12 can certainly help you!

Elegant Slick Design

The realme C12 bears a 6.5-inch LCD multi-touch screen featuring an HD plus display with 1600-by-720-

Pixel of Resolution capacity. Its fantastic mini-drop design with an amazing 88.7% screen-to-body ratio

would blow up your mind. This wide screen can be prolific while doing professional works, watching

media or playing games. C12's display is protected by the Corning Gorila Glass that can save the screen

from accidental scratches.

realme claims that C12 offers about 420cd/m2 typical brightness at maximum. Certainly, this is good

news for those people who stay outdoor long hours of the day and expect great sunlight visibility. Unlike

other phones, the realme C12 lacks any camera bump that not only reflects its design efficiency; but also

makes this phone highly compatible for rough use in everyday life.

The realme C12 will captivate you with its elegant geometric gradient design. On the rear panel, it

presents the magnificent visual effects of diverse color-shades, and angle of lines induced by a creative

trapezoid divider. The realme C12 has a fingerprint sensor on its back panel. This phone is available in

two fascinating colors: Coral Red and Marine Blue.

Reliable Performance with Terrific Speed

The realme C12 is equipped with a 64-bit octa-core processor built with Cortex A53 cortex architecture.

This CPU sports the MediaTek Helio G35 12nm Soc combined with the PowerVR GE8320 GPU. The Helio

G35 is a gaming friendly chipset that assures an amazing combination of speed and efficiency. With the

utmost clock-speed of 2.3 GHz, realme C12's processor can deliver stunning performance while

operating diverse apps and running the latest gaming software. This phone is programmed with the

realme UI on top of Android 10 OS that runs fluently in day to day operations.

The realme C12 packs a LPDDR4X RAM of 3GB capacity. By virtue of its standard RAM power, C12's

graphics performance can be boosted up by 20 percents. In C12, about 32 GB of internal storage is

provided that is quite enough for regular applications. However, if you require much storage, insert an

external memory card up to 256 GB capacity.

The realme C12 can support dual nano SIM cards with a microSD card. Here you also get a 3.5mm

Headset Jack and Micro-USB. This Smartphone has all the essential sensors including Fingerprint sensor,

Light Sensor, Magnetic induction Sensor, Proximity Sensor, and Acceleration Sensor. Its navigation

system includes GPS/Beidou/Glonass.

realme C12 Price in Bangladesh

The price of realme C12 is only BDT 10,990 in Bangladesh. However, the price may vary depending upon

circumstances.

Verdict

The realme C12 presents a proficient combination of software and hardware. Here you get a 6.5-inch

HD+ display, 6000 mAh huge battery, 3GB RAM, 32 GB internal storage, triple AI Nightscape camera and

the Helio G35 gaming processor. Considering the price-range realme C12 packs exciting features. If you

are on the search of the best Smartphone under 11000, don't miss realme C12!

Read: realme 7 Pro Review with Price in Bangladesh

Published by HT Digital Content Services with permission from United News of Bangladesh.

[gzbluedio]

Cost-effective earbuds with auto pause feature and Qualcomm chip: Bluedio Fi in-ear true wireless Bluetooth earbuds

Preface:

Bluetooth technology has developed a lot, from lossy transmission, audio distortion, heavy latency to supporting various high bit rate transmission, it has showed us a huge improvement! Now, most Bluetooth earbuds have changed its wireless mono into TWS (True Wireless Stereo) and adopted Bluedio 5.0.

Bluetooth 5.0, it achieves up to 300-meter wireless transmission distance, upgraded transmission rate and lower latency, Because of Bluetooth 5.0, many Bluetooth 4.0 version TWS earbuds have to be upgraded or even reproduced to remain their competitiveness in the market.

Apart from Apple earbuds, most earbuds in the mid-market adopt RTL8763B and qcc30xx chip, like the Redmi AirDots earbuds that I tested before, which used RTL8763B chip but have heavy disconnection problem. Compared with this, there’s no doubt that Qualcomm chip does a better job in Bluetooth stability, supporting APTX and building higher sound quality. But in the same time, Qualcomm chip’s cost is a little bit higher.

Today, I’m excited to show you guys an excellent TWS earbuds with QCC 3020 chip and auto induction feature, that’s Bluedio Fi in-ear true wireless earbuds! Cost-effective earbuds, Only over 300RMB.

Bluedio, the brand I originally saw on Amazon hot new releases, but with further searching online, I realized that it’s an audio equipment manufacture and a Chinese local brand. 

Fi, as a Bluedio new released item, has a business-style outlook that attracts me a lot.       

Product display and using experience:

Bluedio Fi is packed in a transparent box, and its name Fi seems to be composed of two letters in the word “faith���.

I learned this brand mainly through Amazon before. On the package box, you can see muti-language product introduction and contacts in international platforms like Facebook, Twitter, and domestic platforms like Wechat and Weibo.

There’s also a specifically designed Bluedio App for earbuds burning in and other instruction controls. Very convenient for using.

In the box, there’s a set of earbuds, charging case, user manual, two extra different sizes of silicone earplugs and a Type-C charging cable. The earbuds and the charging case are cleverly packed separately to avoid long-time charging.

The earbuds shape like a dark drop. Where the “L” and “R” marks show is also the touching sensor area.

Compared with my Airpods Pro earbuds, Bluedio Fi has a smaller body, but obvious seams on its surface. 

Bluedio Fi supports phone call, but not with ANC feature and strengthening call quality. More phone call experience will be added after I used it.

Metal shiny cover and strict drawing body together, the charging case has a more elegant and graceful outlook. It has a almost same size with Airpods, but can stand in the desk.

Logo only shows at the charging case, very low-key.

Earbuds will automatically charge when you put it in the charging case, and automatically power on when you open charging case. Operation is simplized a lot.

The workmanship of the charging case is quite good, no visible burr and other flaws inside. And the charging contacts is neat.

There’s a Fi logo inside the charging case. When you charge the case, it will turn red.

And recording LED light will fresh when you put earbuds in the charging case.

Besides, the charging case adopts Type-C interface and is equipped with a charging cable, extremely love it !

Moreover, earbuds is equipped with three different sizes (S,M,L) of soft silicone earplugs, make you wear comfortably.

Even my wife, who hates in-ear earbuds, felt no pain and pressure when she wear it.

Looking from its shape and outlook, we can feel its great fit to ears. It’s just awesome that earbuds won’t fall when you move.

Fi two earbuds can be used synchronously or separately. When you listen to music, you can use them synchronously and enjoy the surround sound. And the power will also show out on your phone when successfully connect them.

In synchronization mode, after connecting one earbud successfully, your cellphone will automatically pop out another earbud’s pairing request. The whole connecting process is very simple.

By scanning the QR code on the package, you can download Bluedio App to enjoy other extra features and services like burning in earbuds with music there. But you need to pay for some music. I think it will be better if all these music are free .

With its adopted high-quality QCC 3020 chip, Bluedio Fi has a great improvement and upgrade in transmission rate and lower latency. Apart from the chip, it also adopts 6mm large drive unit to bring crystal-clear sound and strengthens bass tuning.      

Powerful bass, contagious middle, very good performance. But the treble is a little harsh. I think it’s very good for this price.

Compared with other Bluetooth earbuds which only support AAC (Advanced Audio Coding), Bluedio Fi supports APTX, more effective audio coding, 16bit, 24bit audio and up to 48KHZ radio frequency, to remain more sound details.

Bluedio Fi also has very low latency. The sound and the image is synchronous and I quite enjoy watching movies with this earbuds.

Auto pause, a feature that is only supported in high-end earbuds before, makes music automatically pause when you take off earbuds. I’m quite satisfied that Bluedio Fi has this amazing feature,           

Some true wireless earbuds have a bad performance in phone call because of the long distance between mouth and earbuds microphone. However, Bluedio Fi adopts their own patented VFT technology and effectively improve phone call sound quality.

Although the patented VFT technology is applied in this earbuds, the microphone have no ANC function so that we still will be effected by the surrounding noises when we in the outdoors.

Earbuds endurance is just like the product official introduction, providing about 6 hours of using time, and I usually charge it per 3-4 days. With additional 4 times of charging from the charging case, I can feel free to use it to listen to music no matter when I’m on a business trip or at home.

Only slight tap on the touching sensor area, you can control music play and pause, adjust volume, switch songs or answer phone call, etc. Conveniently. For its business earbuds positioning, the designers didn’t set too much personalized flash lights, but for me, it’s still one of the best earbuds with competitive price.

[nancyulon81]

Effective Kinds Of Metal Detectors

Metal detectors are used to trace any metal objects whether deep underwater or ground. Such metal sensors are an effective and simple way to detect hidden or lost metals such as coins, jewelry, historical findings, bullets, guns and the like. It was initially used for industrial purposes. Many of its other purposes include security screening, metal detection in food and beverages, archaeological findings, treasure hunting and the like.

There are generally three types of metal detectors. It is important to purchase one according to its purpose for effective results. There are very low-frequency metal sensors that are commonly used for a scavenger hunt. Little higher frequency metal sensors are also applied for security screening. Such metal sensor devices are comparatively cheaper than other metal sensors and are commonly available. The device is composed of two coils, one that acts as the receiver and the other as a transmitter. The transmitter sends the electric current and produces a magnetic field around. With the presence of a metal object, the device will produce an alerting sound. To generate new information on best metal detectors please head to Buyersimpact. Pulse Induction is another type of technology applied in metal detectors. The device is composed of a single-coil that sends its signal even deep underground. As such due to its extensive ability, it is used for detecting gold or any other form of precious metals that are deeply rooted. However, such a device comes with higher price tags and is not easily available in the market for purchase.

Lastly, there is a beat frequency oscillator that uses two types of coils such as in the case of low-frequency metal sensors. However, such metal sensors are highly sensitive and can send out several thousand electric pulses per second. Then there are industrial metal detectors great form of metal sensor applied to screen metal objects, firearms, explosives and the like. It can extensively be used for security checking in places such as airports, shopping malls, hotels, and other public places.

[proximitysensorstips-blog]

Factors To Consider When Buying Ferrous Proximity Sensors

 Proximity sensors are used to detect things within a given range of distance and have various applications. These applications vary from the specifications of a sensor .There numerous types of proximity sensors , which makes the selection of one particular one  difficult task . One type of proximity sensors is the ferrous proximity sensor. If one does not have the necessary information to guide them through the process of selecting the appropriate ferrous proximity sensor they can end up with a product that they did not subscribe for or did not plan on buying. The following are some of the tips that one should follow so as to get the best proximity sensors in the market.

 The first thing that one should consider is the sensing distance. Majority of the sensors work from a distance of 0.8 mm to around 40mm and above that, the sensors don not exist. One is then advised to choose a proximity sensor that will be able to fairly suit the needs that the applications will require. It would be absurd to select a sensor whose sensing distance that is before that which the application requires. Learn more about sensors at https://www.britannica.com/technology/radio-sensor.

 The other thing to consider is the compatibility of this proximity sensor one chooses with the available system. There are several proximity sensors that have compatibility in that one can be used in the place of another. For example, the ferrous proximity sensor can be used comfortably in the place of an inductive proximity sensor, as such if one is in search of a ferrous proximity sensor and they miss to find it, they should choose an inductive proximity sensor. One is also advised to carefully inspect their systems so as to know the exact type of sensors the application needs before setting out to find the sensor.

 The other thing to consider is the cost of the proximity sensor. Since there are many sensors in the market, the prices of each proximity sensor varies with the area of application as well as the quality of the sensor. One should look around in the market and get to know the approximate prices of the sensors they desire and compare the price with other dealers so as to get the general trend in price. This step helps you to avoid over spending or being over charged by dealers. After getting the trend, one should go for the dealer with the most affordable prices. Start now!