#ic smd semiconductors

[98995]

Best Capacitors manufacturer in India

Electronic component:

An electronic component is any basic discrete electronic device or physical entity part of an electronic system used to affect electrons or their associated fields. Electronic components are mostly industrial products, available in a singular form and are not to be confused with electrical elements, which are conceptual abstractions representing idealized electronic components and elements. A datasheet for an electronic component is a technical document that provides detailed information about the component’s specifications, characteristics, and performance.

Advantages of Electronic components:

These leads connect to other electrical components, often over wire, to create an electronic circuit with a particular function (for example an amplifier, radio receiver, or oscillator). Basic electronic components may be packaged discretely, as arrays or networks of like components, or integrated inside of packages such as semiconductor integrated circuits, hybrid integrated circuits, or thick film devices. The following list of electronic components focuses on the discrete version of these components, treating such packages as components in their own right.

Classification Electronic components:

Active components rely on a source of energy (usually from the DC circuit, which we have chosen to ignore) and usually can inject power into a circuit, though this is not part of the definition.[1] Active components include amplifying components such as transistors, triode vacuum tubes (valves), and tunnel diodes.

Passive components cannot introduce net energy into the circuit. They also cannot rely on a source of power, except for what is available from the (AC) circuit they are connected to. As a consequence, they cannot amplify (increase the power of a signal), although they may increase a voltage or current (such as is done by a transformer or resonant circuit). Passive components include two-terminal components such as resistors, capacitors, inductors, and transformers.

Electromechanical components can carry out electrical operations by using moving parts or by using electrical connections.

Most passive components with more than two terminals can be described in terms of two-port parameters that satisfy the principle of reciprocity — though there are rare exceptions.[2] In contrast, active components (with more than two terminals) generally lack that property.

Explore our wide range of resistor options designed to meet your electronic component needs. Discover SMD resistors and DIP resistors, available in various power ratings and resistance values, providing versatile solutions for circuit designs.

Additionally, we offer Ceramic Varactors for applications requiring variable capacitance. For higher power applications, our Wire Wound Resistors provide excellent performance and durability. Looking for light-dependent resistors (LDRs) We have those too!

For bulk production, we offer SMD resistor reels, providing convenience and efficiency in large-scale manufacturing. Browse our selection and find the perfect resistors for your electronic projects.

Electronic components like Resistors, Capacitors, Inductors, semiconductor ICs, Relays form the backbone of all the technological advances today. With these, you can design any system, any model for your project.

As the saying goes “You want it, we got it” and we at robu take extra pride in providing the highest quality products to fulfill your ideas at the best price.

All products are shipped within 24 hours and delivered right to your doorstep with the minimum shipping charges.

Film resistors are essential components in electronic circuits, offering precise resistance values. Browse our comprehensive selection of film resistors, including carbon film and metal film variants, renowned for their stability and reliability. Explore various wattages, tolerances, and sizes suitable for diverse applications, from basic circuits to intricate electronic projects.

With exceptional temperature stability and low noise performance, our film resistors ensure optimal functionality in your designs. Whether you’re a hobbyist or a seasoned engineer, find the perfect film resistors to meet your requirements and elevate your projects.

Trust in our quality offerings for dependable performance and seamless integration into your circuits.

[spookysaladchaos]

Global Top 15 Companies Accounted for 51% of total SMD ECG Monitor market (QYResearch, 2021)

According to the new market research report “Global SMD ECG Monitor Market Report 2023-2029”, published by QYResearch, the global SMD ECG Monitor market size is projected to reach USD 5.25 billion by 2029, at a CAGR of 4.8% during the forecast period.

Figure.   Global SMD ECG Monitor Market Size (US$ Million), 2018-2029

Figure.   Global SMD ECG Monitor Top 15 Players Ranking and Market Share（Based on data of 2021, Continually updated）

The global key manufacturers of SMD ECG Monitor include GE Healthcare, Philips, Fukuda Denshi, Schiller, Hill-Rom, Suzuken, NIHON KOHDEN, Spacelabs Healthcare, Libang Equipment, Preventice Solutions , etc. In 2021, the global top five players had a share approximately 51.0% in terms of revenue.

About QYResearch

QYResearch founded in California, USA in 2007.It is a leading global market research and consulting company. With over 16 years’ experience and professional research team in various cities over the world QY Research focuses on management consulting, database and seminar services, IPO consulting, industry chain research and customized research to help our clients in providing non-linear revenue model and make them successful. We are globally recognized for our expansive portfolio of services, good corporate citizenship, and our strong commitment to sustainability. Up to now, we have cooperated with more than 60,000 clients across five continents. Let’s work closely with you and build a bold and better future.

QYResearch is a world-renowned large-scale consulting company. The industry covers various high-tech industry chain market segments, spanning the semiconductor industry chain (semiconductor equipment and parts, semiconductor materials, ICs, Foundry, packaging and testing, discrete devices, sensors, optoelectronic devices), photovoltaic industry chain (equipment, cells, modules, auxiliary material brackets, inverters, power station terminals), new energy automobile industry chain (batteries and materials, auto parts, batteries, motors, electronic control, automotive semiconductors, etc.), communication industry chain (communication system equipment, terminal equipment, electronic components, RF front-end, optical modules, 4G/5G/6G, broadband, IoT, digital economy, AI), advanced materials industry Chain (metal materials, polymer materials, ceramic materials, nano materials, etc.), machinery manufacturing industry chain (CNC machine tools, construction machinery, electrical machinery, 3C automation, industrial robots, lasers, industrial control, drones), food, beverages and pharmaceuticals, medical equipment, agriculture, etc.

[icbros]

Semiconductor channel providers: inventory reduction is slower than expected The problem of semiconductor inventory is not only faced by IC design manufacturers, but also faced by downstream IC channel manufacturers to "overcome difficulties" with chip manufacturers in order to take long-term cooperation into account. Even though there is a small amount of urgent order demand for some chips in succession, some IC channel manufacturers have admitted that the current inventory reduction rate is still slower than originally estimated. IC channel manufacturers analyze whether the current short order in the market is a flash in the pan. Inflation, the Federal Reserve's interest rate increase, the Russian-Uzbekistan conflict and whether there will be retaliatory buying demand in China are the key points to observe. An unnamed IC channel manufacturer revealed that the current inventory de-stocking situation is not as expected. Assuming that the original estimated inventory de-stocking speed is to purchase 0.5 months of goods and cooperate with the sales of 1 month of goods, the inventory of 0.5 months can be gradually reduced; However, the actual situation now is to buy 0.6 to 0.7 months of goods, but only sell 0.8 to 0.9 months of goods, which leads to a slower rate of inventory reduction than expected. According to the report of International Data Corporation (IDC), IDC expects that the global semiconductor revenue in the first quarter of this year will decrease by 13.8% year on year due to inventory adjustment and weak demand. It is not expected to turn to positive growth until the fourth quarter, and the total revenue of the whole year will decline by 5.3%.

ICBROS TECHNOLOGY LIMITED is a worldwide professional electronic components distributor.

【Our hot chip models today:】(In Stock)

BF1608-E2R4DRAT/LF 0603C BF1608-L2R4KCBT/LF 0603C BL2012-20B2450T 0805C BL2012-05B2450T/LF 0805C BL2012-05K2450T/LF 0805C BF2012-L2R4KCCT/LF 0805C BF2012-07N2R4CT/LF 0805C LF2012-B2R4FAAT/LF 0805C BF3225-B2R4CAAT 1210L BF2520-B2R4CACT/LF 2520C BF2520-B2R4CAAT/LF 2520C AT5020-E3R0HBAT/LF SMD BF2520-L2R4CAD SMD BL1608-AVM2450-Q6 SMD BF2012-F2R4DAAT/LF SMD BF3216-B2R4DAAT/LF/F SMD LF1005-K1R8DABT/LF SMD FB2520-05L2R6BT/LF SMD BL1608-20B2450T/LF 0603C BF1608-E2R4DAAT/LF 0603C CP1608-20B0836T/LF 0603C HI0603-1C3N9SNT 201 DP2520-L1524SAT/LF SMD BD2012-20L0820T/LF SMD DP2012-A2455MTT/LF SMD BD2012-20L0820-V2T/LF SMD ATR250-TR43HAAT/LF SMD DP2012-A2455NTT/LF SMD FB2012-07N2R4DT/LF SMD LF2012-L1R4NAAT/LF SMD BL0605-10L0790NAT/LF SMD BF2012-L2R4DAAT/LF SMD0805 M3P250 BGA OP16BJ CAN8 I1-574ATD DIP I1574ATD DIP OP27CJ8 DIP8 OP113GS SOP-8 OP177AR SOP-8 OP184E SOP-8 OP184G SOP-8 OP184GS SOP-8 OP192GS SOP-8 OP193E SOP-8 OP213GS SOP-8 OP262ES SOP-8 OP262FS SOP-8 OP271ES SOP-8 OP275ES SOP-8 OP279ES SOP-8 OP279FS SOP-8 OP282E SOP-8 OP282ES SOP-8 OP282F SOP-8 OP282FS SOP-8 OP284E SOP-8 OP284G SOP-8 OP292ES SOP-8 OP292FS SOP-8 OP295ES SOP-8 OP295FS SOP-8 OP296ES SOP-8 OP77CS SOP-8 OP77ES SOP-8 OP97GS SOP-8 REF191ES SOP-8 REF192ES SOP-8 REF198ESZ SOP-8 REF50D SOP-8 LTC4227CUFD-1#TRPBF 20QFN OP37FP/F DIP8 OP37EP/E DIP8 OP77FP DIP8 LT1461CIS8-5#TRPBF 8SOIC AD632BH CAN10 AD632AH CAN10 OP177CJ CAN8 OP177CJ/883 CAN8 OP177BJ CAN8 AD702AH CAN8 AD702BH CAN8 OP37J CAN8 OP37FJ CAN8 AD712AH CAN8 AD711SH CAN8 AD712SH CAN8 OP220AJ/883B CAN8 OP27J/883 CAN8 AD712TH CAN8 OP42AJ/883 CAN8 OP27AJ/883 CAN8 OP37AJ/883 CAN8 OP43AJ/883 CAN8 OP177AJ/883 CAN8 OP37AJ/883C CAN8 OP16J/883 CAN8 OP42BJ/883 CAN8 AD707AJH CAN8 AD707ALH CAN8

AD707AKH CAN8

Web：http://www.icbros.com Email：jammy@icbros.com HK Tel：+852 44058386 Whatsapp：+852 44058386

[adatronixpvtltd]

390 AL/CL

390 AL/CL Teledyne Integrated Circuit 390ALCL

For more details visit www.adatronix.com

[cooltatoworld]

Electronic components and very hard to find parts. All your electrical parts in one place.

Brands and parts supplier. TI, GE,

Yaskawa, Honeywell, Eaton, Rockwell parts, Siemens, ABB, allen Bradley, siemens, Omron, 

All In One Components sells: Active components, passive components, all in one components, hard to find parts distributor, distributor of obsolete parts, distributor of components, obsolete parts distributor, electronics distributor, electronics components distributor, components distributor, obsolete electronics, obsolete electronic parts, obsolete components, components, hard to find parts, electronic components, obsolete parts, Resistor, Capacitor, Microcontroller, Inductor, Transformer, Battery, Fuse, Diode/LED, Diode, Transistors, Integrated Circuit, Relays, Switches, Motors, Circuit Breakers, LCD, quote,   motorola,   quality,   relays,   sale,   audio,   directory, component,  types electronic,   integrated circuits, ics,   excess,   relays, switches,   products,   protection,   spec,   optoelectronics,   diodes,   parts source,   led,   socket   cable, wire, assemblies,   electronics,   cable connectors,  wire, cable, leds,   switches,   capacitor, resistor, supplies, quote, request, quality,   specials,   obsolete,   distributor electronic,   network,  molex,   source, semiconductors, connectors, cables,   ceramic,   call us, electronic,  power,   electric,   source electronic components,   semiconductors,   resistors,   diode,   electronic component parts,   electronic components,   transistors,   electrical,   source,  shop,   connectors,   manufacturers,   electronic, component,   capacitors,   services,   displays,   semiconductor,   tools, passive components,   components store,   wide,   buy electronic,   distributors,   hard find,    panasonic,   fixed,   manufacturing,   prices, component types, electronic components,   components plus,   types electronic components line,   parts, directory component types,   electronic components line card,   fuses,   need,   part search,  parts,   popular parts,  leading,   board,   control,   quality,   new,   batteries,   hyperlinecard, hot parts, popular,   sourcing, best, alphabetized parts directory, component parts industry,   well,   brands,   raw materials,   needs obsolete, hard find,   adhesives, rf, microtemp g4a01, kte fan switch, jsu21x126aqb, e127584, kedu hy56, e185116, joemex, joemex 74 series, TI, GE, yaskawa, honeywell, eaton, rockwell parts, siemens, ABB, Allen Bradley, Siemens, Omron, Schneider, electronic components, list of components, active components, passive components,  obsolete electronic parts, obsolete components, components, hard to find parts, electronic components, obsolete parts, resistor, capacitor, micro controller, inductor, transformer, battery, fuse, diode/LED, diode, transistors, integrated circuit, relays, switches, motors, circuit breakers, LCD, power supply units, laptop screen replacement parts,   resistors, photo-boards, headers, switches, photo-resistors, voltage regulator,  ic sockets, laser diode, gunn diode, pin diode, tunnel diode, varactor diode,step recovery diode,schottky diode, zonor diode,smd diode, motherboard components, omron electronic components, velocity electronics, soldering electronic equipment, circuit board parts, power modules, electromechanical, wireless connectivity sensors, custom magnetics, custom connectors, flex rigid, microvia HDI.

[e-energyit]

[Weekly Chip Hot List] Top 10 is open! Come see what's new in this week's list! (2022.10.24-10.30)

IRFB4410ZPbF   The Infineon IRFB4410ZPbF is a 100V single N-channel StrongIRFET™ power MOSFET in a TO-220 package.The StrongIRFET™ power MOSFET family is optimized for low RDS (on-state) and high current capability. These devices are ideal for low frequency applications where performance and ruggedness are required. The comprehensive portfolio is suitable for a wide range of applications including DC motors, battery management systems, inverters and DC-DC converters.

  Key applications: interrupters, uninterruptible power supplies, solar inverters, DC motor drives, battery powered applications

   SG2823J-883B   The US Microchip SG2823J-883B is an array of high voltage medium current drivers.The SG2823J-883B integrates eight NPN Darlington pairs and internal suppression diodes for driving lamps, relays and solenoids in many military, aerospace and industrial applications requiring harsh environments. Features an open collector output, breakdown voltage greater than 50V and current carrying capacity of 500mA.

  Main applications: can be used to drive lamps, relays and solenoids in many military, aerospace and industrial applications where harsh environments are required

STM32F103RCT6   The STMicroelectronics STM32F103RCT6 is based on the mainstream enhanced Arm® 32-bit Cortex®-M3 microcontroller with 256 KB Flash, 72 MHz CPU, motor control, USB and CAN.

  Main applications: wireless connectivity, medical, consumer market

  

PMBT3906,215   The Ansett Semiconductor PMBT3906,215 is a PNP switching transistor in a SOT23 (TO-236AB) small surface mount device (SMD) plastic package. Collector-emitter voltage VCEO = -40 V, collector current capability IC = -200 mA.

  Main applications: general purpose amplification and switching

  

SPC5602DF1MLL4   The NXP Semiconductors SPC5602DF1MLL4 is a 32-bit MCU, power architecture core, 256KB Flash, 48MHz, -40 to 125°C, automotive grade, QFP-64 package. The SPC5602DF1MLL4 is a series of 32-bit automotive microcontrollers designed to form the basis for the next wave of central body controller, smart junction box, front module, peripheral body, door control and seat control applications.

  Key applications: Automotive

TL3842P   The Texas Instruments TL3842P is an economical, single-ended 500KHz current-mode PWM controller with 16V/10V UVLO and 100% duty cycle over a temperature range of 0°C to 70°C.

  Key applications: switching regulators of any polarity, transformer-coupled DC/DC converters

  

UC3842BN   ST's UC3842BN is a current-mode PWM. The UC3842BN is a UC284xB family control IC that provides the necessary functionality to implement an off-line or DC-DC fixed frequency current-mode control scheme with a minimum number of external components. The internally implemented circuitry includes a trimmed oscillator (for precise duty cycle control under voltage-locked conditions with a start-up current of less than 0.5mA), a trimmed precision reference for error amplifier input accuracy, logic to ensure latching operation, a PWM comparator that also provides current limit control, and a totem pole designed to supply or absorb high peak currents output stage designed to supply or absorb high peak currents. The output stage is suitable for driving an N-channel MOSFET, which is low in the off state.

  Main applications: Suitable for a wide range of applications

   ZLDO1117QG18TA   The ZLDO1117QG18TA is a fixed-mode regulator with a 1A output current capability.The ZLDO1117QG18TA has a 2% tolerance over the entire industrial temperature range. It is ideally suited to provide well regulated power supplies for high voltage IC applications such as high speed bus termination and low current 3.3V logic supplies over the entire industrial temperature range.

  Main applications: Industrial applications

   AD590MF/883B   The AD590MF/883B is a two-pin IC temperature sensor with an output current proportional to the absolute temperature. The device acts as a high impedance, constant current regulator with a regulation factor of 1 µA/K over a supply voltage range of 4 V to 30 V. The on-chip thin film resistor is laser adjusted and can be used to calibrate the device to output 298.2 μA of current at 298.2 K (25°C).

  Main applications: Remote detection applications

   CYTLP127(TP)   The Zuorui CYTLP127(TP) is a small SMD optocoupler for surface mount assembly.The CYTLP127 consists of a GaAs infrared light emitting diode and a Darlington phototransistor with integral base-emitter resistor to form a high voltage photocoupler with a VCEO of 300 V or more.

  Main applications: switching power supplies, smart meters, industrial control, measuring instruments, copiers and other office equipment, household appliances such as air conditioners, fans, water heaters, etc.

Prepare your supply chain

Buyers of electronic components must now be prepared for future prices, extended delivery time, and continuous challenge of the supply chain. Looking forward to the future, if the price and delivery time continues to increase, the procurement of JIT may become increasingly inevitable. On the contrary, buyers may need to adopt the "just in case" business model, holding excess inventory and finished products to prevent the long -term preparation period and the supply chain interruption.

As the shortage and the interruption of the supply chain continue, communication with customers and suppliers will be essential. Regular communication with suppliers will help buyers prepare for extension of delivery time, and always understand the changing market conditions at any time. Regular communication with customers will help customers manage the expectations of potential delays, rising prices and increased delivery time. This is essential to ease the impact of this news or at least ensure that customers will not be taken attention to the sudden changes in this chaotic market.

Most importantly, buyers of electronic components must take measures to expand and improve their supplier network. In this era, managing your supply chain requires every link to work as a cohesive unit. The distributor of the agent rather than a partner cannot withstand the storm of this market. Communication and transparency are essential for management and planning. In E-energy Holding Limited, we use the following ways to hedge these market conditions for customers:

Our supplier network has been reviewed and improved for more than ten years.

Our strategic location around the world enables us to access and review the company's headquarters before making a purchase decision.

E-energy Holding Limited cooperates with a well -represented testing agency to conduct in -depth inspections and tests before delivering parts to our customers.

Our procurement is concentrated in franchise and manufacturer direct sales.

Our customer manager is committed to providing the highest level of services, communication and transparency. In addition to simply receiving orders, your customer manager will also help you develop solutions, planned inventory and delivery plans, maintain the inventory level of regular procurement, and ensure the authenticity of your parts.

Add E-energy Holding Limited to the list of suppliers approved by you, and let our team help you make strategic and wise procurement decisions.

[shunlongwei]

Rohm 2SAR544P5T100 Https://www.slw-ele.com; Email: sales@shunlongwei.com

#2SAR544P5T100 Rohm 2SAR544P5T100 New Bipolar Transistors - BJT PNP -50V Vceo -3A Ic MPT3 , 2SAR544P5T100 pictures, 2SAR544P5T100 price, #2SAR544P5T100 supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com

https://www.slw-ele.com/2sar544p5t100.html

-------------------------------------------------------------------

Manufacturer: Rohm Semiconductor 

Product Category: Bipolar Transistors - BJT 

RoHS:  Details  

Technology: Si 

Mounting Style: SMD/SMT 

Package / Case: SC-62-3 

Transistor Polarity: PNP 

Configuration: Single 

Collector- Emitter Voltage VCEO Max: - 50 V 

Collector- Base Voltage VCBO: - 50 V 

Emitter- Base Voltage VEBO: - 6 V 

Collector-Emitter Saturation Voltage: - 200 mV 

Maximum DC Collector Current: - 3 A 

Gain Bandwidth Product fT: 300 MHz 

Minimum Operating Temperature: - 55 C 

Maximum Operating Temperature: + 150 C 

Series: 2SxR 

DC Current Gain hFE Max: 450 at - 50 mA, - 3 V  

Packaging: Cut Tape  

Packaging: MouseReel  

Packaging: Reel  

Brand: ROHM Semiconductor  

Continuous Collector Current: - 3 A  

DC Collector/Base Gain hfe Min: 180 at - 50 mA, - 3 V  

Pd - Power Dissipation: 500 mW (1/2 W)  

Product Type: BJTs - Bipolar Transistors  

Factory Pack Quantity: 1000  

Subcategory: Transistors  

Part # Aliases: 2SAR533P5

Bipolar Transistors - BJT PNP -50V Vceo -3A Ic MPT3

[torindia]

'' This current round of gigs, I'm just doing it using pure electronic '' -TOM JENKINSON website : https://torindia.com/

[fastpcba]

SMT Patch basic process

Solder paste printing --> parts placement --> reflow soldering -->AOI optical inspection --> maintenance --> sub-board.

Electronic products are pursuing miniaturization, and the previously used perforated plug-in components cannot be reduced. Electronic products have more complete functions, and the integrated circuits (ICs) used no longer have perforated components, especially large-scale, highly integrated ICs, which have to use surface patch components. With mass production of products and automation of production, the factory must produce high-quality products with low cost and high output to meet customer needs and strengthen market competitiveness. The development of electronic components, the development of integrated circuits (IC), and the diversified application of semiconductor materials. The revolution of electronic technology is imperative and chasing the international trend. It is conceivable that when the production processes of international cpu and image processing device manufacturers such as intel and amd have advanced to more than 20 nanometers, the development of smt, such as surface assembly technology and process, is not a case.

The advantages of SMT Patch processing: high assembly density, small size and light weight of electronic products. The volume and weight of patch components are only about 1/10 of that of traditional plug-in components. Generally, after SMT is adopted, the volume of electronic products is reduced by 40%~60%. The weight is reduced by 60%~80%. High reliability and strong anti-vibration ability. Low solder joint defect rate. Good high frequency characteristics. Reduce electromagnetic and radio frequency interference. It is easy to realize automation and improve production efficiency. Reduce costs by 30%~50%. Save materials, energy, equipment, manpower, time, etc.

It is precisely because of the complexity of the SMT Patch processing process that there are many SMT Patch processing factories that specialize in SMT Patch processing. In Shenzhen, thanks to the vigorous development of the electronics industry, SMT Patch processing has achieved an industry prosperity.

Patch process

1. Single-sided assembly

Incoming inspection => silk screen solder paste (point patch glue) => SMD => drying (curing) => reflow soldering => cleaning => inspection => repair

2. Double-sided assembly

A: Incoming inspection => PCB's A-side silk screen solder paste (point patch glue) => SMD PCB's B-side silk screen solder paste (point patch glue) => SMD => Drying => Reflow soldering ( It is best to only apply to side B => cleaning => inspection => repair).

B: Incoming inspection => PCB's A side silkscreen solder paste (point patch glue) => SMD => Drying (curing) => A side reflow soldering => Cleaning => Turnover = PCB's B side point SMD glue => SMD => curing => B surface wave soldering => cleaning => inspection => repair)

This process is suitable for reflow soldering on side A and wave soldering on side B of PCB. This process should be used when only SOT or SOIC (28) pins are used in the SMD assembled on the B side of the PCB.

3. Single-sided mixed packaging process

Incoming inspection => PCB's A-side silkscreen solder paste (point patch glue) => SMD => drying (curing) => reflow soldering => cleaning => plug-in => wave soldering => cleaning => inspection = > Rework

4. Double-sided mixed packaging process

A: Incoming inspection => PCB's B side point patch glue => SMD => curing => flip board => PCB's A side plug-in => wave soldering => cleaning => inspection => rework

Paste first, insert later, suitable for situations where there are more SMD components than separate components

B: Incoming inspection => PCB's A side plug-in (pin bend) => flip board => PCB's B side patch glue => patch => curing => flip board => wave soldering => cleaning => Inspection => Repair

Insert first, then paste, suitable for the situation where there are more separate components than SMD components

C: Incoming inspection => PCB A side silk screen solder paste => SMD => Drying => Reflow soldering => Plug-in, pin bending => Turnover => PCB B side point patch glue => SMD => curing => flipping => wave soldering => cleaning => inspection => rework A side mixed, B side mounted.

D: Incoming inspection => PCB's B side point patch glue => SMD => curing => flip board => PCB's A side silk screen solder paste => patch => A side reflow soldering => plug-in => B-side wave soldering => cleaning => inspection => rework A-side mixed assembly, B-side mounting. First paste on both sides of SMD, reflow soldering, then inserting, wave soldering E: Incoming inspection => PCB's B-side silk screen solder paste (point patch glue) => SMD => drying (curing) => reflow soldering = > Flip board => PCB A-side silk screen solder paste => SMD => Drying = Reflow soldering 1 (partial soldering can be used) => Plug-in => Wave soldering 2 (If there are few components, manual soldering can be used) => Cleaning => Inspection => Rework A side mounting and B side mixed mounting.

5. Double-sided assembly process

A: Incoming inspection, PCB A side silk screen solder paste (point patch glue), SMD, drying (curing), A side reflow soldering, cleaning, flipping; PCB B side silk screen solder paste (point patch glue) ), SMD, drying, reflow soldering (preferably only for side B, cleaning, testing, rework)

This process is suitable for picking when large SMDs such as PLCC are attached to both sides of the PCB.

B: Incoming inspection, PCB A side silk screen solder paste (point patch glue), SMD, drying (curing), A side reflow soldering, cleaning, flipping; PCB B side point patch glue, SMD, curing , B side wave soldering, cleaning, inspection, rework) This process is suitable for reflow on the A side of the PCB.

Process

SMT basic process components include: screen printing (or dispensing), placement (curing), reflow soldering, cleaning, testing, and repair

1. Silk screen: Its function is to print solder paste or patch glue onto the PCB pads to prepare for the soldering of components. The equipment used is a screen printing machine (screen printing machine), located at the forefront of the SMT production line.

2. Dispensing: It is to drip glue onto the fixed position of the PCB board, and its main function is to fix the components on the PCB board. The equipment used is a glue dispenser, located at the forefront of the SMT production line or behind the testing equipment.

3. Mounting: Its function is to accurately mount the surface mount components to the fixed position of the PCB. The equipment used is a placement machine, located behind the screen printing machine in the SMT production line.

4. Curing: Its function is to melt the patch glue, so that the surface assembly components and the PCB board are firmly bonded together. The equipment used is a curing oven, located behind the placement machine in the SMT production line.

5. Reflow soldering: Its function is to melt the solder paste, so that the surface assembly components and the PCB board are firmly bonded together. The equipment used is a reflow oven, located behind the placement machine in the SMT production line.

6. Cleaning: Its function is to remove the solder residues such as flux that are harmful to the human body on the assembled PCB board. The equipment used is a washing machine, and the location can be variable, online or offline.

7. Inspection: Its function is to inspect the welding quality and assembly quality of the assembled PCB board. The equipment used includes magnifying glass, microscope, online tester (ICT), flying probe tester, automatic optical inspection (AOI), X-RAY inspection system, functional tester, etc. The position can be configured in a suitable place on the production line according to the needs of inspection.

8. Rework: Its function is to rework the PCB board that has failed to detect. The tools used are soldering iron, rework station, etc. Configured at any position in the production line.

[aartimuleict]

Industrial Radiography Equipment Market Worth S$ 1,032.7 by 2027

According to a new market research report published by Transparency Market Research titled ‘Industrial Radiography Equipment Market – Global Industry Analysis, Size, Share, Growth, Trends, and Forecast, 2019–2027,’ the global industrial radiography equipment market was valued at US$ 574.8 Mn in 2018 and is expected to expand at a CAGR of 6.75% from 2019 to 2027, to reach value of US$ 1,032.7 Mn by the end of the forecast period.

Request a Sample - https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=64233

Growing popularity of industrial radiography across the globe to fuel the market

Industrial radiography is increasingly being used in various sectors, such as aerospace & defense, semiconductor, and oil & gas, in order to ensure the structural integrity of products and identify faults, if any, in the manufacturing of components. This is projected to augment the demand for industrial radiographs across the globe. This, in turn, is likely to fuel the industrial radiography equipment market during the forecast period.

Increasing miniaturization in the semiconductor industry to fuel the global industrial radiography equipment market

Over the last few years, the semiconductor industry has been flourishing across the globe, especially in developing economies such as China and India. There have been several technological advancements in the field of semiconductors as the size of electronic components continues to shrink and the demand for high-performance products with increased efficiency in terms of power consumption is increasing. The shrinking size of components makes it difficult to conduct quality tests on components such as printed circuit boards (PCBs), wafers, plug contacts, and wiring. With the help of industrial radiography, it is possible to carry out nondestructive analysis of electronic components such as surface-mount devices (SMDs) and column grid arrays; to identify solder bumps in ICs; and to study the thickness of materials coated on PCBs. Industrial radiography is increasingly being used in the semiconductor sector by key players engaged in the manufacture of electronic components in order to ensure high quality and efficient performance.

Digital radiography segment to expand at a rapid pace throughout the forecast period

Based on imaging technique, the global industrial radiography equipment market has been divided into film-based radiography and digital radiography. Furthermore, the digital radiography segment has been sub-segmented into direct radiography, computed radiography, and computed tomography. Owing to high quality of images generated with the help of digital radiography, the digital radiography segment is expected to expand at a rapid pace during the forecast period. High quality of images makes it possible to better analyze the quality of components under consideration.

Asia Pacific to be rapidly expanding market for industrial radiography equipment led by rising popularity of laundromats in the region

In terms of geography, the global industrial radiography equipment market has been segmented into North America, Europe, Asia Pacific, Middle East & Africa, and South America. In 2018, North America was the leading market, followed by Europe. The market in Asia Pacific is expected to expand at the maximum CAGR from 2019 to 2027, due to rising popularity and growing adoption of industrial radiographs across various sectors in the region.

Key players focusing on expanding their footprint worldwide and gain a competitive edge

Key players operating in the global industrial radiography equipment market are focusing on the development of new products and their introduction in the market to gain a competitive edge and improve their brand positioning in the market. For instance, in November 2018, Fujifilm Corporation announced that it would be adding two new digital radiography (DR) detectors i.e. the Calneo Dual (available only in Japan) and the FDR ES to its portfolio of digital radiography solutions. Furthermore, major players are engaged in forming strategic alliances with peers and less established players in order to gain market share. Key players operating in the global industrial radiography equipment market are Fujifilm Corporation, Comet Group, Shimadzu Corporation, Nikon Corporation, and North Star Imaging.

Request for covid19 Impact Analysis - https://www.transparencymarketresearch.com/sample/sample.php?flag=covid19&rep_id=64233

[maryyeblog]

A Comprehensive Introduction of PCBA

         PCBA, short for printed circuit board assembly, refers to the combination of PCB, components and electronic accessories. Simply speaking, PCBA is actually the PCB with components assembled. This article provides a comprehensive introduction of PCBA from which everybody will learn much.

Assembly Types of PCBA

     The main assembly types of PCBA are shown in Table 1 below.

       Up to now, single-side SMD only and double-side SMD only are mainly applied for power panel and communication backplane while the other assembly types are applied for complicated devices such as computers, DVDs, mobile phones etc.

SMT Procedure

       SMT procedure belongs to a type of solder craft during which paste solder that is distributed to PCB pad in advance is melted through reflow oven so that mechanical and electric connection is implemented between soldering points or pins of SMDs and PCB pad. It is suitable for the soldering of all types of SMDs. The major steps of SMT include tin paste printing, components mounting and reflow soldering.

     • Solder paste printing station

       This station mainly consists of solder paste, model and solder paste printer. Solder paste is first printed on the corresponding position of PCBs from professional solder paste model through solder paste printer. Then electronic components soldering is finished through components mounting and reflow soldering.

         Components mounting station

           This station mainly consists of SMDs, loader and mounter. SMDs are mounted on the certain position of PCBs through component loader and professional mounting software program and are soldered through reflow. Mounters are classified into high-speed mounter and general mounter. The former is applied for crystal chip and small components mounting while the latter for ICs, irregular and large components mounting.

        Reflow soldering station

          This station mainly consists of reflow oven. The soldering of SMDs is to make PCBs with components mounted on them pass reflow oven with soldering parameters set to implement components soldering. Reflow oven mainly includes infrared heating and hot wind heating.

       Wave soldering procedure

         In the process of wave solding, melted solder is transformed into required solder wave through mechanical bump or electromagnetic bump that features jet flow. Then PCBs with components assembled have to pass through solder wave so that mechanical and electric soldering between component soldering points or PCB pad.

           The key steps of wave soldering contain component molding, component plug in or mounting, soldering and cooling through solder wave. It means that molded components are plugged on PCB based on requirement. Then PCB loaded with components is pushed into wave soldering system by transmission device. Next solder flux is sprayed and PCB will suffer preheating in the preheating zone. The final step comes with the wave soldering and cooling.

           • Components molding and plug-in components

           The main job of this station is to premold some components in order to make them meet the requirements of mounting, plugging and wave soldering.

      Wave soldering

        The main job of wave soldering is to plug molded components on the required places according to some requirements. Then PCB loaded with components enters wave soldering system by transmission device. Soldering flux is first sprayed and PCB suffers preheating in the preheating zone. Next comes wave soldering with cooling as the final step.

      Basics on Soldering

      Soldering can be classified into the following three categories: fusion welding, pressure welding and brazing that are displayed in Figure 3.

        Besides, soldering has other categories such as ultrasonic pressure welding, gold ball bonding and laser soldering.

         Brazing can be also classified into hard brazing and soft brazing. The former refers to high temperature and large scale soldering while the latter refers to relatively low temperature and small scale soldering such as component soldering. Concerning some aspects on soft brazing, the following content is complemented.

      a. Definition: Soft brazing refers to the soldering with a temperature that is lower than 450°C.

    b. Features: The following figure indicates features of soft brazing.

       c. Basic theory

         When metal is being soldered and the soldered metal is heated to the certain temperature range, the oxide layer and contaminant will be cleaned under the activation of welding flux and metal surface will obtain sufficient activation energy. Melting solder is melted, wetted, expanded and connected with metallurgy. As weld occurs between solder and soldered metal surface, solder will become solid after cooling with soldering points formed. Strength of extension is related with lattice structure and thickness of bonding layer between metal.

         d. Brazing procedure: The main procedure of soft brazing includes wetting, diffusion, dissolution and metallurgic bonding.

         HK ETEST GROUP supply the electronic component, such as IC, Diodes, Resistor, Capacitor, Agent Brand have Sansung,  Intel, Sk hynix, Micron Technology, Broadcom, Qualcomm, Texas Instruments, Western Digital, ST Microelectronics , NXP Semiconductors,  Broadcom, Sk hynix ,Toshiba, Etc....

[sakshitmr]

Industrial Radiography Equipment Market Latest Innovations, Drivers And Industry Key Events

According to a new market research report published by Transparency Market Research titled ‘Industrial Radiography Equipment Market – Global Industry Analysis, Size, Share, Growth, Trends, and Forecast, 2019–2027,’ the global industrial radiography equipment market was valued at US$ 574.8 Mn in 2018 and is expected to expand at a CAGR of 6.75% from 2019 to 2027, to reach value of US$ 1,032.7 Mn by the end of the forecast period.

Request a Sample – https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=64233

Growing popularity of industrial radiography across the globe to fuel the market

Industrial radiography is increasingly being used in various sectors, such as aerospace & defense, semiconductor, and oil & gas, in order to ensure the structural integrity of products and identify faults, if any, in the manufacturing of components. This is projected to augment the demand for industrial radiographs across the globe. This, in turn, is likely to fuel the industrial radiography equipment market during the forecast period.

Increasing miniaturization in the semiconductor industry to fuel the global industrial radiography equipment market

Over the last few years, the semiconductor industry has been flourishing across the globe, especially in developing economies such as China and India. There have been several technological advancements in the field of semiconductors as the size of electronic components continues to shrink and the demand for high-performance products with increased efficiency in terms of power consumption is increasing. The shrinking size of components makes it difficult to conduct quality tests on components such as printed circuit boards (PCBs), wafers, plug contacts, and wiring. With the help of industrial radiography, it is possible to carry out nondestructive analysis of electronic components such as surface-mount devices (SMDs) and column grid arrays; to identify solder bumps in ICs; and to study the thickness of materials coated on PCBs. Industrial radiography is increasingly being used in the semiconductor sector by key players engaged in the manufacture of electronic components in order to ensure high quality and efficient performance.

[digood223]

PCB assembly process trends

In 2019, the development of electronic PCBA products in the direction of short, small, light, thin and multi-functional, led to the increasing integration of semiconductor integrated circuits, the smaller and smaller SMC, and the narrower pin spacing of SMD. The PCB assembly density of electronic products is getting higher and higher, and the assembly difficulty is getting bigger and bigger. For some products and some occasions, traditional through-hole component insertion process, wave soldering, and manual soldering have been unable to do anything. SMT chip processing has become the mainstream technology of electronic manufacturing.

The development trend of process technology is reflected in the following aspects.

At present, PCB assembly mainly uses printed solder paste reflow soldering process, and reflow soldering is still the mainstream process of SMT chip processing.

Wave soldering is used when mixing single panels and having more through-hole components.

In the mixed board with fewer through-hole components, the through-hole component reflow process is also being used more and more.

With the implementation of lead-free soldering, the wave soldering process is becoming more and more difficult, so selective wave soldering is becoming more and more widely used.

ACA, ACF and ESC technology applications.

Flip-chip FC, wafer-level CSP, WLP and other new packaging assembly technology.

The application of 3D stacked POP technology.

Embedded IC, wafer, and micro passive components in the polymer. Components such as R (resistance), C (capacitance), L (inductance), and filter are embedded in the ceramic substrate and in the PCB substrate to form a composite component or a composite printed board.

FPC has broken through the traditional concept of interconnected technology and has been widely used in various fields.

LED lighting is an important part of the energy-saving and environmental protection industry. It is widely used in display panels, light bulbs, lamps, street lamps, advertising and decorative light strings. It has also developed rapidly in recent years.

[shunlongwei]

Rohm 2SAR544P5T100 Https://www.slw-ele.com; Email: sales@shunlongwei.com

#2SAR544P5T100 Rohm 2SAR544P5T100 New Bipolar Transistors - BJT PNP -50V Vceo -3A Ic MPT3 , 2SAR544P5T100 pictures, 2SAR544P5T100 price, #2SAR544P5T100 supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com

https://www.slw-ele.com/2sar544p5t100.html

-------------------------------------------------------------------

Manufacturer: Rohm Semiconductor 

Product Category: Bipolar Transistors - BJT 

RoHS:  Details  

Technology: Si 

Mounting Style: SMD/SMT 

Package / Case: SC-62-3 

Transistor Polarity: PNP 

Configuration: Single 

Collector- Emitter Voltage VCEO Max: - 50 V 

Collector- Base Voltage VCBO: - 50 V 

Emitter- Base Voltage VEBO: - 6 V 

Collector-Emitter Saturation Voltage: - 200 mV 

Maximum DC Collector Current: - 3 A 

Gain Bandwidth Product fT: 300 MHz 

Minimum Operating Temperature: - 55 C 

Maximum Operating Temperature: + 150 C 

Series: 2SxR 

DC Current Gain hFE Max: 450 at - 50 mA, - 3 V  

Packaging: Cut Tape  

Packaging: MouseReel  

Packaging: Reel  

Brand: ROHM Semiconductor  

Continuous Collector Current: - 3 A  

DC Collector/Base Gain hfe Min: 180 at - 50 mA, - 3 V  

Pd - Power Dissipation: 500 mW (1/2 W)  

Product Type: BJTs - Bipolar Transistors  

Factory Pack Quantity: 1000  

Subcategory: Transistors  

Part # Aliases: 2SAR533P5

Bipolar Transistors - BJT PNP -50V Vceo -3A Ic MPT3

[dvtvn]

Top 11 công ty sản xuất linh kiện điện tử chất lượng nhất tại Việt Nam

Linh kiện điện tử là các phần tử rời rạc cơ bản có những tính năng xác định được dùng cho ghép nối thành mạch điện hay thiết bị điện tử. Một linh kiện điển tử là một thành phần điện tử cơ bản có thể có trong một linh kiện riêng biệt có hai hay nhiều đầu mối điện.

Phân loại linh kiện điện tử có thể có nhiều tiêu chí khác nhau. Song với ý nghĩa phục vụ cho phân tích mạch và khả năng mô hình hoá thành mạch tương đương để tính toán được các tham số mà mạch điện thiết kế ra có thể đạt được, thì sự phân loại theo tác động tới tín hiệu điện được quan niệm là hợp lý nhất.

Ngày nay, ở Việt Nam ngành sản xuất linh kiện điện tử đã và đang đóng góp rất lớn cho nền kinh tế cả nước về số lượng việc làm cũng như thu nhập ngoại tệ. Sau đây dvt.vn xin giới thiệu đến các bạn top 10 công ty sản xuất linh kiện điện tử chất lượng nhất tại Việt Nam để các bạn tham khảo.

1. Công ty TNHH thiết bị điện tử DAEWOO Việt Nam

[caption id="attachment_74363" align="aligncenter" width="494"] Công ty TNHH thiết bị điện tử DAEWOO Việt Nam[/caption]

Lịch sử thành lập từ năm 1973 tại Hàn Quốc và gia nhập vào thị trường Việt Nam năm 1995, DAEWOO là thương hiệu nổi tiếng toàn cầu trong lĩnh vực Linh kiện điện tử.

Chuyên sản xuất và cung cấp Tụ Điện Hóa CE như: Tụ hóa loại nhỏ, tụ hóa loại vừa, tụ nguồn,.. phục vụ rộng rãi trong các ngành thiết bị điện, điện tử,.. Đảm bảo: Chất lượng cao, số lượng lớn, giao hàng nhanh chóng, giá cả hợp lý nhất.

Địa chỉ: Khu Sản Xuất Tân Định, P. Tân Định, TX. Bến Cát,Bình Dương.

2. Công ty TNHH điện tử ABECO Việt Nam

Công Ty ABECO Electronic Việt Nam thành lập vào tháng 7/2010, là một trong những thành viên của tập đoàn ABICO, có trụ sở chính tại Đài Loan, lĩnh vực chính của ABECO là thương mại và phân phối các loại linh kiện điện tử, như: các linh kiện thụ động và các loại linh kiện tách rời cần thiết cho các ngành chế tạo đặc biệt.

Nhân viên và đội ngũ quản lý của ABECO đã có kinh nghiệm trong lĩnh vực linh kiện điện tử trên 10 năm.

ABECO cũng là đại lý phân phối ắc quy Long-Globe tại miền Bắc. ABECO vừa là nhà sản xuất và phân phối các dòng sản phẩm đèn LED nội ngoại thất cung cấp cho các thị trường Châu Á, Châu Âu,..

Địa chỉ: Lô số 20, KCN Quang Minh, Xã Quang Minh, H. Mê Linh, Hà Nội , Việt Nam 

3. Công ty TNHH sản xuất thương mai xuất nhập khẩu và dịch vụ Thiên Bảo

[caption id="attachment_74366" align="aligncenter" width="430"] Công ty TNHH[/caption]

Thiên Bảo là công ty chuyên phân phối các sản phẩm và dịch vụ điện tử - điện công nghiệp chất lượng cao, mang các thương hiệu nổi tiếng quốc tế như quạt Sanyo Denki, Phoenix Contact, tụ Iskra, tụ Elco, Honewell. Bên cạnh đó, chúng tôi còn thiết kế, lắp đặt và thi công các hệ thống điện - điện công nghiệp, tự động hóa dây chuyền sản xuất. Tiêu chí kinh doanh của chúng tôi là "Chất lượng vượt trội - Giá trị gia tăng cao - Giá cả cạnh tranh và Tính thẩm mỹ ưu việt"

Địa chỉ: 170 Bùi Hữu Nghĩa, P. 8, Q. 5,Tp. Hồ Chí Minh

4. Công ty cổ phần điện tử tự động Nguyên Phi

[caption id="attachment_74365" align="aligncenter" width="639"] Công ty cổ phần điện tử tự động Nguyên Phi[/caption]

Autotronics Việt Nam được thành lập và phát triển trên nền tảng là công ty chuyên cung cấp các giải pháp kỹ thuật điện tử-tự động. Hiện nay, chúng tôi chuyên: - Thiết kế, phát triển và sản xuất các thiết bị điện tử-viễn thông, mạch điện tử, mạch và hệ thống điều khiển tự động, phần mềm điều khiển tự động, hệ thống máy tính, hệ thống mạng,…theo yêu cầu của khách hàng, dành cho tất cả các lĩnh vực như công nghiệp, dịch vụ, quảng cáo, giáo dục và đào tạo, y tế, thể thao, dân dụng, giải trí… - Chúng tôi là đối tác và chuyên cung cấp chính thức các thiết bị, máy móc, dụng cụ kiểm tra và đo lường điện tử-viễn thông-cơ khí…của các hãng nổi tiếng như KILEWS, GwINSTEK, GOOTS, HAKKO, KONIKA MINOLTA , \... - Bên cạnh đó, chúng tôi chuyên cung cấp các loại linh kiện điện tử-viễn thông, máy tính… - Các đối tác: UNILEVER, PANASONIC,..

Địa chỉ: 99B Hòa Hưng, P. 12, Q. 10,Tp. Hồ Chí Minh

5. Công ty TNHH FC Việt Nam

[caption id="attachment_74372" align="aligncenter" width="649"] Công ty TNHH FC Việt Nam[/caption]

Đây là công ty có vốn đầu tư 100% từ Nhật Bản, có bề dày kinh nghiệm trong lĩnh vực sản xuất các loại Ribbon inpact, các linh kiện điện tử. Đội ngũ nhân viên kĩ thuật cao, nhiều kinh nghiệm và tâm huyết.

Ưu điểm:

Giá cả hợp lí

Nhân viên tâm huyết và kinh nghiệm

Sản phẩm: linh kiện điện tử, linh kiện hộp mực, màn hình,...

Địa chỉ: đường số 4, khu công nghiêp Long Bình, TP. Biên Hòa, Đồng Nai.

6. Công ty khoa học sáng tạo ROBOTICS

[caption id="attachment_74371" align="aligncenter" width="631"] Công ty khoa học sáng tạo ROBOTICS[/caption]

Công ty chuyên mua bán các loại linh kiện điện tử đầy đủ mọi chủng loại từ vi mạch điều khiển, module mạch sạc đến máy khoan cắt cầm tay, động cơ khoan mini, sò nóng lạnh cùng đa dạng các loại linh kiện điện tử khác.

Đảm bảo:

- Chất lượng cao - Số lượng không hạn chế - Giao hàng nhanh chóng - Giá cả hợp lý

Đ/c: 121 Bùi Xương Trạch, P. Khương Đình, Q. Thanh Xuân, Hà Nội

7. Công ty TNHH điện tử Jing Gong Việt Nam

[caption id="attachment_74370" align="aligncenter" width="567"] CÔNG TY TNHH ĐIỆN TỬ JING GONG[/caption]

Công Ty TNHH Điện Tử Jing Gong ( Việt Nam ) có trụ sở chính là Công Ty TNHH Điện Tử Cao Dương đặt tại Đài Loan, với hơn hơn 20 năm kinh nghiệm và kỹ thuật sản xuất board mạch điện tử . Chuyên ngành sản xuất board mạch điện tử, có thể sản xuất PCB và MPCB. Máy móc thiết bị sản xuất gồm: máy đồ họa, máy in phim, máy khoan lỗ CNC, máy ăn mòn, máy in, máy hoàn thành, V-CUT, máy chống oxy hóa, các thiết bị có khả năng sản xuất độc lập.

Địa chỉ: Đường Na1, Mỹ Phước, Bến Cát, Bình Dương

8. Công ty TNHH Caristech Ban NBW

[caption id="attachment_74369" align="aligncenter" width="509"] Công Ty TNHH CARISTECH BAN NBW[/caption]

Thành lập năm 1999 tại Hàn Quốc, CARISTEK là công ty tiên phong trong lĩnh vực phân phối và cung cấp chip, linh kiện điện - điện tử hàng đầu trên thị trường thế giới. &#10150 Sản phẩm: - Chip Ceramic, Murata MLCC, Samsung MLCC, Tantal Capacitor, Chip Tantal, Chip Inductor, Chip Resistor, Samsung Memory. - Cảm biến, biến trở, cầu chì, tụ điện, điện trở, chiết áp, IC,.. &#10150 Murata, Samsung, UniOhm, Vishay, ST, Yageo, Waisn, ON, AVX, Kemet, Texas Instruments, Freescale, Seoul Semiconductor,.. Để đóng góp vào sự phát triển ngành kỹ thuật Điện – Điện tử vốn còn non trẻ tại Việt Nam. CARISTEK cam kết cung cấp cho quý khách hàng sản phẩm chất lượng và những dịch vụ kiểu mới đầy sáng tạo, chuyên nghiệp được giao hàng quốc tế nhanh chóng.

Địa chỉ: 596 Đường Liên Phường, Phường Phú Hữu, Quận 9, Hồ Chí Minh

9. Công ty TNHH Tài Sinh

[caption id="attachment_74368" align="aligncenter" width="551"] Công ty TNHH Tài Sinh[/caption]

Đây là công ty chuyên sản xuất và cung cấp các linh kiện điện tử, terminal các loại, thiết bị tự động hóa, thiết bị viễn thông... Sản phẩm tại công ty được kiểm định nghiêm ngặt, đạt chuẩn ISO 9002-2008.

Ưu điểm:

Chất lượng cao

Uy tín

Giá cả hợp lí

Sản phẩm: Terminal, thiết bị đầu cuối các loại, thiết bị truyền tải điện,...

Địa chỉ: 316 An Dương Vương, phường 10, quận 6, TP. HCM

10. Công ty TNHH kỹ thuật điện tử TH

[caption id="attachment_74367" align="aligncenter" width="583"] Công ty TNHH kỹ thuật điện tử TH[/caption]

Công ty TNHH kỹ thuật điện tử TH được thành lập năm 2014, với hơn 15 năm trong lĩnh vực phân phối linh kiện điện tử, thiết bị dụng cụ. Công ty có vai trò là cầu nối giữa các nhà sản xuất linh kiện, nguyên liệu để cung cấp cho các nhà sản xuất thiết bị ứng dụng.

Ưu điểm:

Kinh nghiệm sản xuất dày dặn

Đáp ứng tốt nhu cầu khách hàng

Sản phẩm: linh kiện thụ động, linh kiện kết nối, linh kiện SMD, cảm biến, vật liệu hàn, vật liệu chống nhiễu, thiết bị gỡ hàn, thiết bị hút khói, thiết bị kiểm tra,..

Địa chỉ: số 82, đường 13, Phước Bình, quận 9, TP. HCM

Ngày nay, việc sản xuất linh kiện điện tử đóng vai trò rất quan trọng trong việc phát triển nền kinh tế, cho thấy được nền công nghệ ngày một phát triển. Các công ty sản xuất linh kiện điện tử ngày càng nhiều xong chất lượng và uy tín thì vẫn chưa được đảm bảo. qua bài viết có thể giúp các bạn có thêm những công ty sản xuất linh kiện điện tử chất lượng và uy tín nhất.

Tham khảo bài gốc ở : Top 11 công ty sản xuất linh kiện điện tử chất lượng nhất tại Việt Nam