#how to set up rockspace wifi extender

[wifi-range-extender-setup]

Rockspace WiFi Extender Setup 

A Rockspace WiFi extender Setup can significantly enhance your wireless network coverage, ensuring a strong and stable connection throughout your home or office. Setting up your Rockspace WiFi extender is a straightforward process. Step by step guide on how to set up a Rockspace WiFi extender:

Setting up Rockspace WiFi Extender:Manual Method

Step-by-step guide Rockspace WiFi extender setup manually. This guide assumes a generic setup process; the specific steps might vary slightly based on the model you have. Follow these steps to manually set up your Rockspace WiFi extender:

Plug in the extender near your router and wait for the power LED to become solid.

 Connect your device (computer or smartphone) to the WiFi network named "Rockspace-XXXX" (where XXXX represents the last 4 digits of your extender's MAC address).

Open a web browser and enter "ap.setup" or “192.168.10.1" in the address bar.

To finish the setup, follow the on-screen steps, which include selecting your existing WiFi network and entering its password.

Once the extender connects to your router's network, you can relocate it to an optimal location.

Following these steps should help you manually set up your Rockspace WiFi extender. Remember, it's important to consult your extender's specific user manual for accurate and detailed instructions to your model.

Rockspace Extender Setup using WPS method

Rockspace WiFi extender Setup using the WPS (Wi-Fi Protected Setup) method can be a quick and convenient way to extend your WiFi coverage:

Plug in the extender and wait for the power LED to become solid.

Press the WPS button on the extender.

Within 2 minutes, press the WPS button on your router.

Once the extender's WiFi LED becomes solid, the setup is complete.

Note: The WPS setup process might vary slightly depending on the model of your Rockspace extender. Please refer to the user manual that came with your extender for precise instructions.

How do I perform a factory reset on a Rockspace WiFi extender?

To perform a factory reset on a Rockspace WiFi extender, follow these steps:

Locate the reset button on the extender (usually on the side or back).

Use a paperclip or pin to press and hold the reset button for about 10 seconds.

When the LEDs begin to flash, release the button.

The extender will reset to its default settings.

By performing a factory reset, you'll essentially start over with a clean slate, allowing you to set up the extender as if it were brand new. Always refer to your specific extender's manual for the most accurate and detailed instructions on performing a factory reset.

Update Rockspace WiFi Extender Firmware 

Updating the firmware of your Rockspace WiFi extender is important to ensure that it's running the latest software version, which can improve performance, security, and functionality. Step by step general guide on how to update the firmware:

Visit the Rockspace official website and navigate to the support section.

Enter your extender's model number to find the latest firmware version.

Save the firmware file to your computer after downloading it.

Log in to the extender's web interface (using the IP address from the manual setup step).

Look for the "Firmware Update" section and upload the downloaded file.

Wait for the update to complete and do not interrupt the process.

Note:That the exact steps may vary depending on the specific model of your Rockspace WiFi extender. Always refer to the user manual or documentation provided by Rockspace for accurate and model-specific instructions.

Troubleshooting Steps:

If you're experiencing issues with your Rockspace WiFi extender Setup, there are several troubleshooting steps you can take to identify and resolve the problems.Here is a list of basic troubleshooting steps.

Ensure the extender is within a reasonable distance from the router.

Check that the extender's power LED is solid and not blinking.

Verify that you are connecting to the correct extended WiFi network.

Restart both the extender and your router.

Make sure the WiFi password is correctly entered during setup.

Update the firmware on the extender to the most recent version.

Perform a factory reset and set up the extender again from scratch.

By following these setup and troubleshooting guidelines, you can maximize the performance of your Rockspace WiFi extender and enjoy seamless connectivity across your space. If persistent issues occur, referring to the product's user manual or contacting Rockspace's customer support can provide further assistance.

[apsetupus]

Re.rockspace.local Extender Setup

You recently bought a re.rockspace.local  Wi-Fi Extender, right? Awesome! You can quickly expand your Wi-Fi signals to cover every area of your house or place of business in only a few minutes.

To take advantage of all of the device's capabilities, you must set it up correctly. Therefore, this guide is your go-to reference if you're unsure how to correctly set up your re.rockspace.local Wi-Fi Extender. Let's get started right away!

How can i setup Re.rockspace.local Extender?

You can configure your re.rockspace.local Wi-Fi extender in one of two ways. Either the WPS button or a web browser can be used for that. Let's begin with the WPS approach.

Re.rockspace.local Extender Setup via wps?

Using the Wi-Fi Protected Setup (WPS) button, you can use this technique to expand your Wi-Fi network. If your router has a WPS button, it should be marked "WPS" on your router. The absence of the button indicates that your router lacks it (so you will need to use the second method that will be discussed later in the post to extend your Wi-Fi network).

Connect your re.rockspace.local Extender to an electrical outlet (plug it near the router in the same room). After that, wait a short while for the PWR LED to turn completely blue. Ensure that the device's antenna is facing up and vertical to the ground.

After around two minutes, press the WPS button on your router. After that, press the WPS button on the re.rockspace.local Wi-Fi extender as well. then watch for the extender's Signal LED to turn solid blue.

Your Wi-Fi devices should be connected after moving the extender.

Connect the extender to an outlet located midway between the router and the Wi-Fi dead zone for optimal performance. However, confirm that the place you select is accessible via your current Wi-Fi network.

Wait a moment for the Signal LED to turn completely blue. When it does, join it with your Wi-Fi-enabled devices. The SSID of your extender is the SSID of your Wi-Fi router with the prefix _EXT/5GEXT. And your Wi-Fi router's password also works.

Note:- if you need any help regarding you're.rockspace.local extender so contact our technician or visit the official website that is ap setup.

How can i setup re.rockspace.local via web browser?

As previously indicated, this is an additional way to install a re.rockspace.local Wi-Fi Extender. You should attempt this strategy if the first one didn't work for you.

Wait until the PWR LED goes solid blue before plugging the device into a power outlet in the same room as the router.

Join the extender's wireless network, rockspace EXT, with your WiFi device. But make sure any mobile data is turned off. Enter http://re.rockspace.local in the address bar of your web browser now. Additionally, you can utilize 192.168.0.254 and set up a login password for future tries.

Choose the Wi-Fi network you want to expand after that. Once you've entered the network password, look for the "Extended Successfully!" screen after a brief delay.

Your Wi-Fi devices should be connected after moving the extender.

Connect the extender to an outlet located midway between the router and the Wi-Fi dead zone for optimal performance. But make sure the place you pick is accessible via your current Wi-Fi network.

Next, watch for a solid blue Signal LED. When it does, join it with your Wi-Fi-enabled devices. The SSID of your extender is the SSID of your Wi-Fi router with the prefix _EXT/5GEXT. The password is also the same as the one for your Wi-Fi router.

[profoundlandcreator]

How to Setup Rockspace Extender

Rock space extenders are well known in the market when it comes to best affordable extenders without compromising with the quality of wifi Connection. If you are on this page because you wanted to Setup Rockspace Extender then just follow the below given instructions. First of all make sure that your Rockspace Extender is plugged in to the wall near your router then only start the Re.Rockspace.Local Setup process. Before we start Setup its important to make sure extender have solid light on power.

Read more about Re rock space Extender....

[routerloginsetupnet]

Use your IP address to log in to the internet:

It's linked to a clandestine network. The SSID name of the switch is shown on the device's bottom and can be altered in simultaneous settings.

Open your program on your device and type 192.168.0.1 into the address box, then press Start on the first page.

Select a connection type. The switch has three connection methods: PPPoE, Dynamic IP Address, and Static IP Address.

You'll find autoconfiguration here. You can choose the precise type of link in your network by giving data as needed. The next button should be pressed.

Keep in mind that if you're using a PPPoE connection, you'll need to provide your PPPoE client name and password before pressing Next.

[xiomaraborjas9861]

How do I reset my rockspace wifi extender? Sometimes people forget their WiFi Externder’s password and couldn’t login to its user interface, sometimes Exterders wear off due to the daily use. There could be other problems with your extender. Its solution can be simple as to just Reset it, maybe something deeper that requires you to re-install it.

In this article, we are going to tell you how to rockspace WiFi extender and return the settings to the factory defaults.

Note: If you perform a factory reset , it will erase all current settings that you’ve made with your extender which cannot be undone. Steps to rockspace WiFi extender via ap.local

Method 1: Take a paperclip and straighten it. Now you need to insert this paperclip in a hole located at the base of your D-Link extender to press and hold the Reset button. Keep pressing it for 10 seconds until a LED will turn red. This proves that the device is rebooting.

Once it is turned ON, wait for 30 seconds. Open a web browser and access the user interface via default IP address is http://ap.local or http://192.168.1. Follow the instructions to reset the password if forgotten.

Method 2: If credentials are known.

Through the homepage of the user interface of the D-Link extender, at the top right corner or the screen, a Management Tab  is there. Click it. Then from the drop down menu, tap on the System. Tap the Restore Factory Defaults button. A confirmation window will pop up to confirm theRest, it is more like a warning. Tap OK to proceed with the factory reset.

Note:  There is no requirement of username password under the factory reset configuration interface. Leave the Admin Password field blank.

[katieralston2067977]

Re.rockspace.local is a setup link. If you have had a little bit of exposure to routers you may already know how they are supposed to be setup. They can be connected to your router via a link that allows you to feed the router’s details into the extender so that it can easily connect to your router and then relay the network without any hassle. Rockspace AC 1200 is a dual-band extender of 2.4GHz and 5GHz. It comes with strong signals which can penetrate walls and other obstacles effortlessly.The setup procedures to the majority of the extenders available in the market are quite simple and easy to figure out and so is the rock space setup. Just to diminish any sorts of confusion in the mechanism of the setup we shall go ahead and see in detail how we can set up our own rock space extender in a very convenient and simple way.

[shirleycaesar113992]

Re.rockspace.local is a setup link. If you have had a little bit of exposure to routers you may already know how they are supposed to be setup. They can be connected to your router via a link that allows you to feed the router’s details into the extender so that it can easily connect to your router and then relay the network without any hassle. Rockspace AC 1200 is a dual-band extender of 2.4GHz and 5GHz. It comes with strong signals which can penetrate walls and other obstacles effortlessly.The setup procedures to the majority of the extenders available in the market are quite simple and easy to figure out and so is the rock space setup. Just to diminish any sorts of confusion in the mechanism of the setup we shall go ahead and see in detail how we can set up our own rock space extender in a very convenient and simple way.

[rerockspacelocal-blog]

In this blog, you will learn how to set up Rockspace AC750 Wifi Range extender

[httprerockspacelocal]

How To Setup Rockspace Wifi Range Extender?

If you are looking to install the Rockspace Wifi range extender and looking for the steps on how to setup Rockspace Wifi range extender then this blog will help you. Easily install the Wifi extender at your home and office.

Read Here: https://httprerockspacelocal.blogspot.com/2022/08/how-to-setup-rockspace-wifi-range.html

[rockspacelocalus]

How to Easily Install the Rockspace Extender Setup?

Rockspace WiFi range extender is the great gadget used to store the settings on which you can get to the home WiFi network. Along these lines, to change the settings of the Rockspace extender then access the re.rockspace.local or 192.168.0.254 web address. From that point, rename the WiFi network, modify the administrator password of the Rockspace extender and change the security as per the prerequisite. Here, you can likewise make the visitor WiFi network and set or supplant the other security choices.

However, the majority of the users are confused about how to do the extender settings. Assuming that you are the person who is likewise searching for the directions to change or install the Rockspace extender setup settings then, at that point, don't overreact! You simply have to look down till the end and look at the means as referenced in it. We should get everything rolling right away.

Go through the mentioned points for the Rockspace WiFi range extender setup:

Step 1: Once you get the IP address of the Rockspace range extender then close the order brief window by tapping on the left button at the brief or by tapping on "x" on the spring up.

Step 2: Launch the web program from your framework. From that point onward, type the IP address in the location bar of the web program. Click on the enter button.

Step 3: Next, you will be approached to enter the username and password to get to the extender programming or firmware.

Step 4: It is both the default username and password for the Rockspace range extender or an extraordinary username and password assuming you have made it during the installation of Rockspace extender setup.

Step 5: in the event that you have made the extraordinary username and password then make a point to note them at the protected spot. In the event that you didn't recall the login certification subtleties then reset the extender to the manufacturing plant default settings.

Step 6: Write down the default login qualification subtleties of the Rockspace range extender. Enter the username and password into the fitting fields of the Rockspace window.

Step 7: Thereafter, you can see the firmware settings of the Rockspace extender.

Step 8: On every one of the Rock space WiFi range extender setup, you need to apply the progressions before proceeding with the further interaction.

Step 9: Once you are finished with the above advances, then sign in again to the Rockspace WiFi range extender web interface. At the point when you complete the entire setup process, you really want to close the internet browser.

With the previously mentioned guidelines, you can undoubtedly finish the re.rockspace.local setup and after that entrance and change the settings as per your necessities. In the event that you are confronting any trouble in adjusting the settings of the extender then you can contact our professionals or visit our website for more information while accessing re.rockspace.local login.

[carlos12ward]

Rockspace Extender RSD0606 configuration

Using a Rockspace RSD0606 WIFI Extender, wifi signals can access those areas of your home where they hardly used to reach. Now, feel the presence of your WIFI range at each corner of your house. Rockspace Extender directly takes the signals from the main router and replicates them to the larger areas. With Rockspace extenders like RSD060 and AC1900, you can enjoy WIFI signals up to 15000 sq. feet. 

Points to keep in mind

Keep in mind that the repeater should be plugged in and placed near the router only. Once you plug in your Rockspace extender and power it on, wait till the LED becomes solid. Now, learn how to login into your repeater using the following methods.

Re.rockspace.local configuration using the following methods

Launch an Internet directory from the devices connected to the Rockspace Local.

In your internet directory, visit www.Re.rockspace.local via its address bar

Click the enter tab. When you see the Rockspace local login page, enter the username.

Just next to the username field, enter the Re.rockspace.local login password.

As you enter the username and password, click the login tab.

As soon as you click the login tab, you are at the Rockspace local Basic homepage.

Rockspace features

The high-speed technology of this WIFI extender utilizes both 2.4 GHz and 5 GHz WI-FI bands.

Rockspace RSD0606 is an ideal device for online gaming.

It is also best for bandwidth-demanding tasks and smooth HD video streaming.

Using its WPS button, you get connected to the network within minutes. 

Its Smart Signal Indicator helps you to understand its functional behavior.

Using Rockspace RSD0606 repeater, you can enjoy Dual-band speeds of up to 750Mbps. 

It can boost your wireless signals instantly.

And it helps to reach the areas where it hardly used to go. 

Rockspace also has compatibility with 802.11 b/g/n and 802.11ac Wi-Fi-enabled gadgets.

Utilizing a Rockspace extender is the best way to achieve a stable and rapid network for all your home office devices. Rockspace extender also offers many latest features which are quick to use. The administrator can log into the Rockspace Extender's settings using the Re.rockspace.local web address manually.

[nesamarcil4321]

Why should I reset my re.rockspace.local range extender?

Like with any other hardware unit, your re.rockspace.local wireless extender too can face some problems or errors. There could be all sorts of potential reasons that you require to perform a reset on your range extender. Here, first of all, we will discuss all such potential reasons causing a kernel panic. Three of them are the basic reasons;

1. Bugs in firmware: - Just like a computer, your router and the wireless range extender can crash because of firmware bugs eating up most of the memory and causing compulsory reset to be performed. You can delete the bugs and clear the caches out of the memory of your range extender but some bugs can only be removed after reset. 

2. IP addresses Conflicts: - Your Rockspace local wireless range extender manages both public and private IP addresses. Sometimes both the IP addresses mess up and create conflicts. If two or more devices on your network have the same IP address, or if your Rockspace range extender doesn't have an up-to-date public IP address, your internet connection might start sinking. Resetting the more rote will reset the IP assignments so the extender and router start functioning again. 

3. Overheating Issue: - If your range extender starts heating up too much, especially when you keep it in an enclosed locus, it can crash. In this case, it is better to reset the entire settings and bring it to its default factory settings. You never know which software, feature, app, or application is causing the heating problem. It is better to reset and reinstall the devices. 

4. Dropping Internet Issue: - When your Rockspace local WIFI extender drops internet connection, and is going offline again and again, then it needs reset. Even when you install new firmware for your extender, you need to reset to apply fresh application into your extender's default configuration.

5. To swap between AP mode and extender mode: - If you want to set your range extender as an access point mode that is already working on extender mode, then perform a reset. After reset your re.rockspace.local login will be reframed and can set to a different Mode. Before the reset, make sure you have taken a backup of the entire settings and configuration that you have made on your range extender. 

How do I reset my Rockspace WiFi extender? 

Make certain that your Rockspace local extender is powered on and is connected to a power source. If it is not, then insert a power adapter and connect to a wall outlet. 

On the back of the extender locate a hole and press the embedded reset button inside the hole. Use a small pin or needle-like object to press the hole.

Hold the object gently that you have taken to perform reset. Insert the pin inside the hole and press it for at least ten to fifteen seconds.

 If the LED on your range extender is not flashing rapidly, that means you need to press the reset button again. 

Look at the power LED. If it is flashing rapidly, then your Rockspace extender is booting up and getting its default factory settings. 

Wait for a few minutes and let the extender achieve its factory default configuration.

That's all about how you reset your range extender with a simple reset button. Now, you also come to know why we need to reset. It is very important to know the cause before you perform an activity. Reset is a simple process but you should not perform it occasionally. Rockspace local reset process should only be performed when no other option is left with you. 

Is Rockspace a good WiFi extender?

Rockspace is a small plug-in device with adjustable antennas. If we take it as an example, then Rock Space AC1200 is a potential way to push wireless data even to the far corners of your house. The basic capability of your range extender and lack of customization are managed by an easy ap.setup web portal. Rockspace extenders come in all varieties, one that suits your small home other than to fill a multistory building. For a better output vertically place the antennas of your range extender. 

Re.rockspace.local login 

All routers by Rockspace wireless range extender are unobtrusive and can pack your home with wireless data. Rockspace extender has the ability and power to stretch your 2.4 GHz and 5 GHz networks. Moreover Re.rockspace.local login is a web address that is in-built in your router as the default gateway. The web address re.rockspace.local helps to login and access the settings of your extender. The web address is also used when the IP address fails to access the login window. IT makes the login and setup process more easy and simple.

How to use re.rockspace.local login web address?

Open a browser in a PC or any configuration device of your choice.

Navigate the address bar of the browser to re.rockspace.local login

As you see a login window, enter admin to fill the SSID authentication

After SSID, leave the password section blank and click login button

Here you are! You have successfully reached the login page of your range extender

[apsetupus]

Re.rockspace.local Extender Setup

Rockspace local WiFi extenders serve as a repeater to support the signal and offer adequate strength in dead spots or for bigger areas where wireless transmission is required. Fundamentally, the re.rockspace.local extender local WiFi extender uses the 2.4G band and can transmit a 300 Mbps full signal. An additional option is an AC1200 WiFi range extender, which operates on a dual band and enhances the organisation of your home by extending the range and speed of WiFi communications. You can access the basic settings for Rockspace local WiFi Extenders by heading to the Ap.Setup login page.

Simply hit the WPS button to connect to a router, and the connection with signal augmentation will be made in a matter of seconds. Additionally, the wifi extender has a reset button that may be pressed to restore it to its factory preset settings. Press the reset button repeatedly until the LED turns red. Re.rockspace.local is the standard web address for Rockspace Local routers.

How can i setup Re.rockspace.local 

Regarding Easy Steps for Rockspace.local Extender Setup:

To configure and connect the Re.rockspace.local Extnender Setup wifi extender to a device, the user must follow the installation instructions found at re.rockspace.local.

In order to extend the wifi signal, the user can use the WPS button or a smartphone to connect to the Web UI and check the rockspace extender's signal strength.

Additionally, the antennae must be positioned according to instructions for better wifi coverage and signal strength.

After successfully logging into the web UI for re.rockspace.local login, you can check the status of any connected routers or devices as well as the wifi name.

On this re.rockspace.local login page, you may also modify the wifi extender's settings and create a new login name and password.

To make changes and activate the new settings, you must restart the extension.

In either case, you must reset the extender; once reset to its default settings, the user will need to change every parameter on the extender.

Note:- If you need any help regarding your wifi extender so contact our technician or visit the official website that is ap.setup. 

 Re.rockspace.local extender setup via manual method

The fundamental steps indicated below should be followed to set up the rockspace extender:

You need to first put the wifi extender onto a power outlet in order to access http re.rockspace.local Extender Setup.

To access the re.rockspace.local login page when the power has been turned on, navigate to http re.rockspace.local Extender Setup or 192.168.0.254 and type either of these addresses into the address bar.

The user can try a different browser if the Rockspace Extender login page on one browser isn't working.

The user can configure the Rockspace Extender by entering the range extender username and password when the re.rockspace.local login page for the Rockspace local extender loads.

Set up the Rockspace Extender in accordance with your requirements.

 install the Rockspace Mesh WiFi System

The Rockspace Extender Home WiFi System features MU-MIMO Wi-Fi, which simultaneously operates on both the 2.4GHz and 5GHz bands, in contrast to earlier routers (accelerate to 1167Mbps). It can simultaneously and at a comparable rate transfer data to several devices. You can also engage greater Quality of Service skills to guarantee a better gameplay experience.

Rockspace AC1200 Mesh Wi-Fi Router setup

Installing and downloading the RS Wi-Fi App RS Wi-Fi App installation is required for mobile devices. You may get RS Wi-Fi from the App Store or Google Play or by using the QR code. Let us introduce you to the RS WiFi App using these instructions.

Your modem should be turned off after removing the battery (if there is any).

Using the included Ethernet cable, attach your modem's LAN port or the Ethernet connection to any hub's (WAN/LAN) port.

The most significant hub is this one.

Your modem's battery has to be replaced; turn it on.

The basic hub's LED marker lights will start to glow green and sparkle as soon as you attach it to a power source using the included power connector.

Hold for roughly 40 seconds, at which point the system's initialization process will be complete. until the LED pointer gradually becomes green.

Link the central hub to the internet.

Enter the password for the crucial node's SSID after choosing it from the list of Wi-Fi networks on your mobile device.

[profoundlandcreator]

Rockspace Extender General Guide

Rockspace Extender General Guide

Network dead zones are always a headache for those using a wireless connection. The best solution for this problem is to use a Wireless Extender. It's harder to pick a good Extender from the whole lineup with the value for money as well. One of the best manufacturers who create the best Wireless Extender is Rockspace. Each consumer can pick Extender from a huge lineup in various price sectors. Re rock space local wifi extender boost your signals and make your workplace no dead zone area.

Rockspace local wifi extender works at single 2.4 GHz and the most famous model from Rockspace Extender is AC1200 which supports dual-band too. These Wireless Extenders are very easy to setup device. Rockspace Extender can set up with the single press via WPS and also setup via online through their official setup page http://re.rockspace.local. or 192.168.0.254. We can go through a detailed step by step process in the following sections

Features On Rockspace Extender

* High Signal boost.

* Full signal coverage

* Easy setup via WPS and Web UI

* Almost compatible with all devices.

* Smart signal indicator helps to find the perfect spot easily.

* Most models support dual-band which is future proof.

* Some models support Access Point Mode.

Things inside the Box

 * Rockspace Wireless Extender

* Power cable and adaptor

* Quick Guide / Manual

* Warranty Card

Important Extender Models from Rockspace

Rockspace Extenders comprises of various single-band and dual-band Extenders in 2.4GHz and 5GHz. Most important model from Rockspace is AC-1200 Dual Band Repeater. AC750 is another model within a more budget section. Different models come with different features as well. All models include single press WPS setup but your router should also support WPS connection. Rockspace AC-1200 also works in triple mode; it can work as an Access point as well. The important part of Extenders is to proper positioning of Wireless Extenders. The position must be midpoint from the router as well as a dead zone to get maximum coverage and maximum performance. Some models come with a smart signal indicator as well. This shows the signal level graphically which is easier to find the perfect spot.

Rockspace Extender Setup

As we mentioned before, there are two ways to set up your Rockspace Extender. You can set up with the single press via WPS and you can set up in online through re.rockspace.local. or 192.168.0.254.

We can briefly go through each setup in the following steps.  

Rockspace Extender Setup with Web UI

To set up your Extender via Web UI, you need a web browser installed. We prefer Google Chrome and Mozilla Firefox. There is a specific website as well to do this setup, Connect to http://re.rockspace.local or 192.168.0.254. from the connected device.

 1. Power your Rock space Extender.

2. Connect your device Wi-Fi device to rockspace_EXT WiFi network.

3. Open any above-mentioned web browser from the connected device.

4. Open the above-mentioned link from the device via a web browser.

6. Select the WiFi Network.

7. Enter your Wi-Fi Password from the connected device.

8. Reposition your Wireless Extender to any better spot.

9. Start Enjoying your Extended Network connection.

 Rockspace Extender Setup with WPS

 Rockspace Extender also comprises of another easy method. In this method, the only requirement is the ability of your router for WPS. For all those devices which don't support WPS can use the above method. We can go through this method steps now.

 1. Power your Extender through an AC outlet.

2. After turning ON, Press WPS button on your router.

Note: If there's no WPS button, go for the above method.

3. Now press WPS button on your Rockspace Wireless Extender

4. Reposition your Rockspace Extender which prescribed in the description.

5. Connect your device as your comfort.

6. Start Enjoying your Network connection.

 Rock space Extender setup as Access Point

 Rockspace Extender can be used as an Access Point instead of working as an Extender. We can go through step by step process for Access Point setup now. re.rockspace.local login is needed in the official Website.

 1. Power your Rockspace repeater via Electrical outlet.

2. Connect your Rock space Extender to your Router using any compatible Ethernet cable.

3. Now follow the steps as mentioned above.

4. Open any web browser and open Rockspace Extender Webpage via websites mentioned in the Web browser.

5. In the website, change the connection mode as Access Point and start using your Rockspace Extender as Access Point.

FAQ

There are lots of doubts regarding Rockspace Extender. We can go through some questions now.

 1. Important Question is my rock space wifi extender not working.

A. If you go through the above steps correctly, there will be no problem. If there is no power in your Extender, then you can demand a replace or repair from the manufacturer.

 2. After Extending, do we need new SSID and password?

A. No, you can use the same SSID and password of your Wi-Fi router.

 3. Which connections Rockspace Extenders work?

A. Almost all models work in WPA, WPA2.

 4. What do the colours from the device represent?

A. Blue colour indicates a good connection, Red colour indicates poor connection and no colour indicate No connection at all.

 5. Rock space Extender support dual-band or single band?

A. Rock space Extender supports the single band in some models and dual-band in some other models. Most famous AC 1200 supports dual-band.

 6. Is there a mobile application for rockspace Extender?

A. No, but there is a website for remote managing the Extender and set up process as well.

  As a whole, Rock space Extenders is the best option for anyone looking for a good Wireless Extenders in any price point. It comes with good enough features and also budget-friendly as well. Rock space works hard to make you worth every penny External antennas help to give the best coverage available in the market. Even though there is no stand-alone mobile application for Rockspace, Website is good enough to forget that negative. The Best Wireless Extender or the best value for money Wireless Extender from Rockspace is definitely the Rockspace Wireless dual-band Extender AC-1200.

Read more…   https://re-rockspace-local.com/

[rerockpace-blog]

Full Instruction- How to setup re-rockspace-local wifi extender

Setup re-rockspace-local wifi extender

For bigger zones where remote transmission is required, re.rockspace nearby wifi extender goes about as a repeater to help the sign and keeps it from deadzone zone. Essentially, re.rockspace nearby wifi extender works at 2.4G band in this way giving full sign inclusion transmission speed of 300 Mbps. Likewise, AC1200 wifi go extender is accessible that works at double band and lift your home system by expanding the range and speed of wifi signal. To arrangement the association with switch, one needs to simply press the WPS button and inside couple of moments the association with broaden the sign will be set up. Essentially, a reset button is given on the gadget by which the wifi extender can be reestablished to default settings. The reset button must be squeezed until the marker turns red.

Steps to Follow Re.Rockspace nearby wifi extender Configuration

To arrange and associating the re.rockspace.local wifi extender to a gadget, one must follow the rockspace wifi extender arrangement guidelines gave on http/re.rockspace.local. For broadening the wifi signal by wifi extender, we can utilize WPS fasten or can likewise login to Web UI (utilizing an advanced mobile phone) and check the sign quality. In addition for better wifi inclusion and sign quality, the reception apparatuses must be situated as needs be. When you login effectively to web UI, you can check the status of associated switch or gadgets and wifi name. On this page, we can likewise change the settings of wifi extender and can arrangement new login name and secret word. To spare and actuate any of the altered settings, we need to reboot the extender. Yet, in the event that we reset the extender, at that point it will be set to the default settings and one needs to arrangement all the settings again in the extender.

Now and then, the gadget may perform irregular activities, at that point one needs to visit the rockspace wifi extender site http://re.rockspace.local or 192.168.0.254 and utilize the refreshed programming to determine the specific issue.

Read more... https://re-rockspace-local.com/

[rerockspacelocal01-blog]

Rerockspacelocal provide to solve your technical issues related to re.rockspace.local, how to set up rockspace wifi extender, rockspace wifi extender setup.