#dead!spamton

[zarla-s]

[previous] [next]

Time to restock the shelves!

In the game, when the Addisons all leave after Spamton "dies", some Darkners go and look in their stalls to steal stuff and then say that all of it looks like cheap junk, and they would have felt ripped off even if they didn't pay. So I figure that Spamton AND the Addisons both just sell garbage and the Addisons were just better at it than him, haha. Meaning they can both go dumpster diving together for new product! Who knows what Yellow even sells anyway...

[index] [patreon] [comicfury]

[the-other-puppet]

~Two to the one for the one to the three~

Jon Arbuckle's dance fits him just right I swear

[chaosxcrushed]

it happens on a regular basis

original under cut !!

[cheesycatz]

The Making of: Life-Size Malworm Plush

(Wormton AU)

STATS

16 ft 3 in (495 cm) long

Total time: 150 hours

Material Cost: $124

Theoretical minimum cost (based on seamstress wage): $2,524

(Progress photos and commentary below)

I'll be referring to my life-size wormton plush as "malworm" for convenience sake.

Unlike my Spamton NEO, Caine, and Fake Peppino plushies, I didn't spend a lot of time on concept art. Since I planned to make the malworm plush as close as possible to its 2D design, I didn't have to add much stylization, other than simplifying some details (no way in hell was I going to make 104 separate embroidered stitches for the segments of his toes, sorry). I mainly used the planning stage to calculate how wide the body pieces needed to be, plotting it out in 1/4 in : 3 in scale and using circumference formula to find the values I needed. I planned to make it around 10 feet long, the length of a young adult malworm. A lot of this project was improv, but, I mean, it wasn't my first or second or third time making a spamton centipede.

The head was quite a complicated shape, so I carved a tiny model out of craft foam, covered one half of it in masking tape, then cut the masking tape mask (hah) into flat pieces. I then traced the pieces onto graph paper and manually scaled them up by using the fact that I wanted the nose to be 1 ft long as reference. The rest of the pattern pieces were very simple, as wormton's teeth, body, legs, etc were very easy to translate into 2D shapes. I used old school notes as paper for the body, as I needed a lot of it. It was entertaining cutting exerpts of Moby Dick and English Renaissance biographies into body parts. I ended up making the body significantly longer; I had to spend $100 dollars on fur anyways, so why not make a maximum size one?

Making the pattern pieces took around 8 hours. While waiting for the fur to ship, I started cutting out the teeth, legs, and eyes. By the time the fur arrived, I had already sewn 36 worm teeth. I did an 11hr all-nighter to cut all the fur in one sitting the day it arrived. After a long vacuuming session and an uptake in the amount of polyester fiber in my lungs, I finished cutting the pieces, taking about 18 hours and 40 minutes.

As usual, the head was the first thing I worked on. It was...kind of wonky once I flipped it inside out. I trimmed some of the fur so that I could actually see what was happening. The main issues were the lack of any forehead, the nose being way too wide, and the cheeks being too flat. I did some ladder stitching as well as modifying the thing from the inside, and eventually made the head look much better. The cheeks still don't stick out that much still, but I'm happy with how the head looks now. I think it conquered the sopping wet owl resemblance. I inserted wire into the nose and jaws to help them keep their shape.

When I started this project, I wasn't sure whether to make it based off of Wormton or just a copyright-free malworm; I decided to do both. I went with red for the non-Spamton version, as I think it really fits the cartoony fly/mothman-style cryptid look malworms are supposed to have.

I sewed a square pouch into the throat and put in all those teeth. I used hot glue to wrap blue squares around a wire for the proboscis, because I think I would've gone bonkers cuckoo bananas if I had to hand sew that entire thing. The throat pouch holds the proboscis when it's not extended, as well as anything else I wanted to shove in there. I never measured it, but it's around 4-5 ft long. I finally made the Spamton... eye patches(?) and a pair of eyelids, though I didn't end up using them in the photo shoot. I also made a new pair of nostrils, as the old ones kind of got swallowed up from all the plastic surgery I was giving him

Now that the head was finished, I got to work on the body. I sewed the white belly and segments of the body together. I left most of the tail open, as the fur was too thick for me to flip it out at a certain point. I worked on the legs, next. After living out my cosplay dreams by putting the claws on my fingers like bugles chips, I grouped the claws together and sewed most of each leg and foot together, leaving me with many pairs of charred drumsticks (did not taste good)

I attached an extra long wire structure into each set of claws, then threaded the wire through each respective leg and stuffed them. I ladder stitched the claws to each foot, then stuffed each with some plastic beans in order to give the feet weight. I then finished sewing each foot shut. I now had a pile of disembodied limbs and one very long scarf.

I wound many long pieces of wire together to create an armature for the body. While the plush's body is way too heavy to be properly posable, the wire does still give some structure. I wrapped the extra long ends of the legs' wires to the metal spine, using the body's leg holes for reference. I then pulled the body up the metal armature like a sock.

I pulled the legs through their respective holes and stuffed the body. It was the first time the malworm was huggable! It's sort of like an oversized body pillow, in a way. I had to ladder-stich all the limbs, the head, and the rest of the tail, as it would've been completely impossible to flip inside out. It was quite difficult to do on furry fabric, and my thread frequently broke from the force I had to pull with to keep the stitches tight. Eventually, I got everything attached to some degree.

The last details I worked on were the mane, tail tufts, and scopula pads. The mane and tail tufts were ladder stitched onto the body, but I decided to use glue to attach the pads to the feet. I think the extra blue details make his proboscis fit much better, and who doesn't love spider paw pads? I also glued some velcro to the eye patches so that they stay attached better. They slide under the black eye rings.

My malworm was finally finished! I tried to put a lot of effort into the photo shoot so that people who don't know about the AU can enjoy it. I wanted to make it seem like some weird entity whose only goal is obtaining more Spamton brainrot. Hence it making Spamton on Mario Kart DS under the bed, obsessing over the Spamton Plush, inspecting the Spamton Shrine, and just generally harassing the photographer (me, I guess?). I wanted to capture the silliness, creepiness, and lack of respect for personal space that Spamton is known for. I thought about giving him a bag of doritos under the bed like that one image of the isopods eating them, but went with the DS instead. I thought it would be funny to see this thing playing Super Mario 64 DS (or Super Spamton 64) and here the "buh bye!" sound effect when it closes the DSi XL.

That's all from me, for now. I have other Wormton related matter to attend to.

Don't let the parasitic Spamton larvae bite

[voidshrub]

“Time is running out… make a move!”

Heh.. I guess you could say…. he’s drowning in his own tho- *I am forcibly removed from the stage and thrown into the Abyss*

I tried out a bunch of new things with this one… I’m really happy with how it turned out :)

Kinda wish it could flash to the beat though…

Clicky wicky (pink bastard) belongs to @brightgoat ! And there’s a veeeeery brief appearance of @e40536 ‘s Link (green) in there as well! Next art will be an actual browser history post… two browser doodles in a month (hopefully) guys… I’m on a roll!!!

Individual frames under the cut for your viewing pleasure (and because I had to kill the gif quality a little to make it fit in the post)

[taralen]

[what do you mean]? [i wonder!]

LOSING MY @#()$. PSYCHOSIS VENT.

[killergift]

Haha

[sunny-m00n]

[boykisserwoah]

DOODLE DUMP!!

Sorry I’ve been kinda dead on this site but we’re BACK IN BUSINESS BABYYYYYYYYY

C/W : THE LAST IMAGE IS ACID BATH THEORY SPAMTON. THIS CAN BE SEEN AS DISTURBING, AND THERE IS SLIGHT BLOOD.

[grim-vs-lizard]

[ventussolder]

Dear lord the mental eel

Spamton mii, for miitopia, with custom mouth, expression,,

[jul-yando]

Jevil Dies

[b1g-sh0t-s4lsmn-1997]

[yanderespamton78]

i made a thing

my friend told me to draw them iceskating so here we are

i couldnt be arsed to do a background raugh. also the dress blue is wearing is was inspired by the dress pink addison was wearing in that cool aurora borealis snowgrave MAP here (GO WATCH IT ITS SO COOL AND AURORA BOREALIS IS A BANGER). idk not my best work i feel like the anatomy looks a bit stiff but i might as well post it bc tumblr nice and wont bully me. im happy with the colour choices tho (i actually swatched the colours to see how they would look next to eachother instead of winging it for once wow). also i spend like all yesterday afternoon working on this and when i was finished i left the file open in case i wanted to do a bg and then MY WHOLE ASS COMPUTER RESET IT HAS NEVER DONE THAT BEFORE WTF. thank fuck krita has an autosave feature but if it didnt i would jump into oncoming traffic.

sketch below the cut bc why not i already have it

i made addispams coat longer cus it was bugging me

[spamton-and-neo]

Huh those are... interesting tapes- can we see what's on them?

SPAMPTON: (Goid BoY) [NE0]!!1!

[bl4z3-qwer]

He's the businessman, he's the talent agent.

He's the smile of the Metropolis, and you ALL know his name!

He's TENNA VISSIONNE!!