#chisels

[moishe-pipick]

[slack-wise]

Cole Hardware c/o John McVey

[wikirobot]

Continuing to make progress on my new bench. Got the legs finished and the stringers setup. Marked out and cut two of the mortises into the top. Gotta take a break and sharpen my chisels up before the next two.

[handcraftedloghomes]

#ThrowbackThursday Here's a great video from 2015 using the "Flaren," This tool is flat on one side and has an outcannel bevel on the other. Fitted with a socket handle, the flaren can be used effectively on either side for planing, dressing and as a clean-up tool, rolling off the flared edge. At Cascade Handcrafted, we use this tool daily, building our beautifully detailed, handcrafted log homes and cabins.

[weirdponytail]

I love my new gouge chisel. It came out of the box arm shave sharp, and it’s only attacked me twice!

[mymerit]

Points and Chisels for Atlas Copco/Epiroc CP300

Our points and chisels are a direct fit for Atlas Copco/Epiroc CP300 models. These tools measure 2.76 inches in diameter and 32 inches in length. Points and chisels are essential tools for a wide range of hydraulic breaker tasks. From breaking rock to asphalt and pavement demolition, these tools deliver outstanding performance. Made from high-quality alloy steel, our points and chisels undergo…

[chiselsset]

chisels

Are you passionate about woodworking and carving? Whether you’re a professional craftsman or a hobbyist, the right tools can make a significant difference in the quality of your work. One essential tool for any woodworker is a chisel set. In this article, we will guide you through finding the best chisel set for carving that suits your needs and budget.

Read More : https://genuisreviews.com/best-chisel-set-for-carving/

[dwuerch-blog]

Ouch and Oh Me – Enduring Construction

A couple of days ago, I blogged about us being temples of the Holy Spirit. But we are very much still under construction. In fact, we are perpetual “works in progress”! And speaking of works in progress, let’s talk about the grand basilica, the Sagrada Familia in the heart of Barcelona, Spain. If you thought your home renovations took forever, this architectural marvel has been “coming soon” for…

[hinamie]

inflict

[turtletoria]

they call me the sitter the way i sit on piles of doodles for weeks at a time

[lazylittledragon]

Hey so I'm the goober that's writing the Baldur's Skate fanfic. When thinking about the worldbuilding I had a question. What do you imagine Drizzt is doing? (I like to think he's an Olympic speedskater but 🤷🏼)

tHIS IS THE BEST QUESTION EVER

i really like the idea of him being a figure skater bc the books always describe him as lithe and graceful (and that swordfighting is like dancing to him 🥺🥺). and also astarion being obsessed with him would make even more sense akfdhdfj

also this is basically the equivalent of being at your community theatre and then meryl streep shows up

[wikirobot]

Went through and sharpened my chisels. Mostly a motley crew or hand me downs. Gotta say the ones I got from Aldi a few years ago might be my favorites after they get a good sharpening in (also I don't feel guilty abusing them a bit).

My general process is to use the honing guide and have the main face be around 25 degrees (this is only really needed occasionally), then cut a higher angle edge, 30 degrees, on the cutting edge. It means I only have to hit that 30degree grind for the next few sharpening sessions.

For the higher angle cuts I tend to do a few passes at 1000 till the edge is crisp, then a few at 4000, then place the flat on the 4000 and cut off the "burr"

[shawnwerner]

Narex Premium Before/After Stropping

This is my 1" Narex Premium unhandled chisel.

The first photo is the bevel from the wood after chopping/paring. Gunk is likely wood fiber with a touch of rust since they sat in the shop for a day or two prior to the photo.

The second is after stropping w/ 15K compound on 2mm buffalo leather glued to plywood.

I've never sharpened the side bevels so we can compare to the grind straight from the factory, which was and is very consistent and sharp.

I strop frequently, though my approach is slow and methodical. I put my finger as close to the edge as possible to keep the bevel flat and then with firm downward pressure slowly draw the chisel across the compound.

After I see iron swarf start to collect in the wax I'll check my bevel and usually I'm about 1/2 there. Once I'm satisfied I'll flip it over the edge and pull the back flat across a few times, careful not to pull it over the edge.

[weirdponytail]

13 years ago I ruined this chisel’s edge by trying to sharpen it with a dremel.

I’ve tried three different times in the last week to get it back to the right angle to even start putting a good edge on it. Now, after three hours of hard work tonight, the edge is straight, 25°, and it shaves hair off my arm with light pressure. I can even see my reflection clearly.

All by hand. A very relaxing evening.

EDIT: that’s a Norwegian flag reflected, not me.

[mymerit]

Points and Chisels for Atlas Copco/Epiroc CP180H

Our points and chisels are a direct fit for your Atlas Copco/Epiroc CP180H. The OEM part numbers are 3363119534 (Chisel) and 3363119533 (Moil point). This tool measures 2.63 inches in diameter and 24 inches in length. Points and chisels are essential for almost every job with a hydraulic breaker, from breaking rock to asphalt and pavement demolition. Our tools are crafted from alloy steel,…

[sundreary]

the beef is squashed! (but at what cost...)

sequel to this