#cad design programs

[synnoptech]

Selecting the Finest 3D CAD Program: An All-Inclusive

Welcome to the realm of design innovation! At Synnoptech CAD Solutions, we're not just about creating designs; we're about sculpting visions into reality. Our CAD design programs are the heartbeat of countless industries, empowering designers, engineers, and creators to bring their ideas to life with precision and efficiency.

Business Name: Synnoptech Cad Solutions

Website:https://www.synnoptechcad.com/

Call: +91-9924 333 633

Mail Id: hello@synnoptechcad.com

Adress- D-810, Titanium Business Park, Behind Divya Bhaskar Press, Off Prahladnagar Road, Prahladnagar, Ahmedabad – 380015 SEND AN INQUIRY

Street - Eglinton Avenue, Toronto, ON - M4P 1A6

CAD, or Computer-Aided Design, revolutionized the way designs are conceptualized and executed. It's not just about drawing lines anymore; it's about creating virtual prototypes, simulating real-world scenarios, and optimizing designs for efficiency and performance.

Exploring Synnoptech CAD Solutions

Synnoptech CAD Solutions stands at the forefront of CAD innovation, providing a suite of powerful tools tailored to meet the diverse needs of modern designers. Whether you're designing mechanical parts, architectural structures, or intricate prototypes, Synnoptech has you covered.

Features and Capabilities of Synnoptech CAD

User-Friendly Interface: Say goodbye to steep learning curves. Synnoptech CAD Solutions boasts an intuitive interface designed to streamline your workflow and minimize frustration.

Compatibility Across Platforms: Whether you're on Windows, macOS, or Linux, Synnoptech CAD Solutions ensures seamless compatibility, allowing you to work across different devices without missing a beat.

Precision and Accuracy: When precision matters, trust Synnoptech CAD Solutions to deliver. Our advanced algorithms and robust tools ensure that your designs are as accurate as they are beautiful.

Collaborative Capabilities: Collaboration is key to success in today's interconnected world. With Synnoptech CAD Solutions, you can easily share your designs with colleagues and clients, facilitating seamless collaboration and feedback.

Seamless Integration with Other Tools: From CAM software to 3D printing platforms, Synnoptech CAD Solutions integrates seamlessly with a wide range of tools, allowing you to extend the functionality of your design workflow.

Customization Options: We understand that every designer has unique preferences and requirements. That's why Synnoptech CAD Solutions offers extensive customization options, allowing you to tailor the software to suit your specific needs.

Cost-Effectiveness: Investing in cad design programs software shouldn't break the bank. Synnoptech CAD Solutions offers competitive pricing plans to ensure that our tools remain accessible to designers of all backgrounds.

Training and Support: Transitioning to a new CAD software can be daunting, but fear not. Synnoptech CAD Solutions provides comprehensive training resources and dedicated support to help you make the most of our tools.

Community and Resources: Join a vibrant community of designers, engineers, and creators who are passionate about pushing the boundaries of design. Access exclusive resources, participate in forums, and stay up-to-date with the latest trends and techniques.

In conclusion, Synnoptech CAD Solutions isn't just a software suite; it's a gateway to limitless creativity and innovation. Whether you're a hobbyist tinkering in your garage or a professional architect shaping the skylines of tomorrow, Synnoptech CAD Solutions has the tools you need to turn your dreams into reality.

[attitudetallyacademy]

Master Multi AutoCAD Skills for 2D & 3D Design Like a Pro

Looking to upskill in CAD design? The Multi AutoCAD course covers 2D drafting, 3D modeling, interior layouts, civil, mechanical, and architectural drawings – all in one complete program. This course is ideal for engineers, architects, and design students who want to gain real-world AutoCAD experience across multiple domains. Learn advanced techniques, industry workflows, and design practices that align with today's project requirements. Whether you're preparing for a career in design or want to boost your professional value, Multi AutoCAD training offers the flexibility and depth you need.

Start your journey toward CAD mastery today with the right guidance and tools.

Visit Attitude Academy📚

📍 Visit Us: Yamuna Vihar | Uttam Nagar

📞 Call: +91 9654382235

🌐 Website: www.attitudetallyacademy.com

📩 Email: career@attitudetallyacademy.com

📸 Follow us on: attitudeacademy4u

[yeehawgeek]

HOLY SHIT I CAN DESIGN AND PRINT EARRINGS

[iigjaipur]

Unlocking the World of CAD Jewelry Design: A Comprehensive Course for Creative Mastery

In the ever-evolving landscape of jewelry design, Computer-Aided Design (CAD) has emerged as a revolutionary tool, transforming the way artisans bring their creative visions to life. The intersection of traditional craftsmanship and cutting-edge technology has paved the way for a new era in jewelry design, and mastering with CAD Jewellery Design Course is an essential skill for those seeking to thrive in this dynamic industry.

The Significance of CAD in Jewelry Design

CAD offers designers a virtual canvas to explore and experiment with intricate designs that may be challenging to achieve through traditional methods alone. This technology allows for precision and accuracy in every detail, ensuring that the final piece is a true reflection of the artist's vision.

One of the primary advantages of CAD in jewelry design is the ability to create highly detailed 3D models. Designers can manipulate and visualize their creations from every angle, allowing for a comprehensive understanding of the piece before it even reaches the production phase. This not only streamlines the design process but also minimizes the margin for error, ensuring a higher level of quality in the final product.

The Journey of Learning CAD Jewelry Design

Embarking on the journey to master CAD jewelry design is a transformative experience. A comprehensive course in this field not only equips aspiring designers with technical skills but also nurtures their creativity. The curriculum typically covers a range of topics, including software proficiency, design principles, and practical applications.

Understanding CAD Software

The cornerstone of any CAD jewelry design course lies in mastering the relevant software. Students delve into the functionalities of popular CAD tools, learning how to navigate the interface, create and modify 3D models, and utilize advanced features to enhance their designs. Proficiency in these tools empowers designers to bring their ideas to life with precision and efficiency.

Exploring Design Principles

While technical proficiency is crucial, a well-rounded CAD jewelry design course also places a strong emphasis on design principles. Understanding the fundamentals of aesthetics, proportion, and balance is essential for creating visually appealing and marketable jewelry. Students learn how to seamlessly integrate these principles into their digital designs, elevating their creations to works of art.

Practical Applications and Project Work

The beauty of a comprehensive CAD jewelry design course lies in its hands-on approach. Students are often tasked with real-world projects that challenge them to apply their newly acquired skills. These projects not only serve as a testament to their growth but also provide a portfolio of work that can be showcased to potential clients or employers.

Future Prospects in CAD Jewelry Design

As the jewelry industry continues to embrace technology, the demand for skilled CAD designers is on the rise. Graduates of a comprehensive CAD jewelry design course find themselves well-positioned for exciting opportunities in various sectors, including custom jewelry design, manufacturing, and even entrepreneurship.

Click here to know more about such jewellery designing courses.

Conclusion

Mastering the art of CAD jewelry design opens doors to a world where creativity knows no bounds. A comprehensive course in this field is not just about acquiring technical skills but about unlocking the true potential of one's artistic vision. Aspiring designers who embark on this journey find themselves at the forefront of innovation, ready to shape the future of jewelry design with their unique creations. So, are you ready to unleash your creativity and master the art of CAD jewelry design? The virtual realm of limitless possibilities awaits.

[notsoheadless]

Build things :)

me and some of my friends installed a program that was originally supposed to be like LogMeIn but for gamers and we have it set so you don't have to ask for permission to get on someone else's computer and can just Hop On and sometimes I'll be bored on my laptop and be like 'yayyy time to go see what Antoinette is up to :)' like my own personal twitch streamer except it's shapes 102 homework

[jojo-oliver]

Buy a patch, help me pay my rent

$25 CAD Only 25 of each design available, 50 total Click me for Etsy link I have moved from Germany to Canada, where my mom had been homeless for 3 months. I placed myself in homelessness with her and we stayed in a shelter for 1 month. We have: ✅found housing (after 30+ viewings that all rejected her) ✅gotten hired (mom increased to full time, I have found part time) ✅registered with every assistance program we can However, after fronting the deposit and first month's rent and all the bills myself, I'm worried about making ends meet at the end of the month. Mom is escaping an abusive relationship and has very little. I'm having iron-on patches printed by a local business and they're currently past the proof stage. They will be 4x4 inches big and will look absolutely sick on your jacket. Or your jeans. Or your bag. If you go buy a patch, I'll send it in the mail to you as soon as they're done(could be a couple weeks). You will be supporting me and my mom getting back on our feet. And you'll have a badass new patch.

[docgold13]

Heroes & Villains The DC Animated Universe - Paper Cut-Out Portraits and Profiles

Goons of Gotham

There was no shortage of goon, miscreants and scoundrels in Gotham City, far too many to list individually in this project.  That said, here are several of the more prominent goons that batman has had to contend with throughout the years.

Germs and Bell

A pair of neurotic goons in the employ of Roland Daggat, Germs and Bell handled the illegal dirty work that allowed Daggat to conduct his illegal affairs while keeping his hands clean and maintaining plausible deniability.  Unsurprisingly, this did not work out well for the pair of ne’er-do-wells and both ended up defeated and apprehended by the Dark Knight.  

Actor Ed Bagley Jr. provided the voice for Germs while actor Scott Valentine voiced Bell.  The cads first appeared in the fourth episode of the first season of Batman: The Animated Series, ‘Feat of Clay Part One.’    

Carlton Duquesne 

A renown mobster in Gotham City, Carlton Duquesne ran highly successful protection rackets for The Penguin. Duquesne teamed up with the Penguin and Rupert Thorne in a potentially lucrative scheme to sell illegal weapons to the war torn nation of Kaznia.  The operation was taken down by the mysterious Batwoman and Duquesne and his coconspirators were sentenced to prison.

Actor Kevin Michael Richardson provided the voice for Carlton Duquesne with the character appearing in the animated feature, Batman: Mystery of The Batwoman.  

Ma Mayhem

The villainous Ma Mayhem was an old-fashioned criminal in the futuristic Gotham City. With her two sons in tow, Ma Mayhem committed several robberies that eventually led to her running afoul of Batman (Terry McGinnis).  Although Batman initially struggled in dealing with the villains, the hero eventually prevailed and Mayhem and her two boys were captured and incarcerated.

Actress Kathleen Freeman provided the voice for Ma Mayhem with the matriarchal menace  first appearing in the nineteenth episode of the second season of Batman Beyond, ‘The Egg Baby.’  

Captain Clown

Not much is known about Captain Clown, other than it was absolutely terrifying.  It was a powerful android of unknown origins that The Joker had obtained and dressed up as a sea-faring clown.  The android was programed to follow The Joker’s instruction and aided the Clown Prince of Crime in his scheme to use a garbage barge to embank all of Gotham with his toxic laughing gas.  

It was quite difficult for Batman to defeat Captain Clown, only succeeding when he was able to trap the android in an industrial car crusher that compacted it into a cube of metal and wires.  Distraught over his robotic minion’s demise, The Joker exclaimed ‘You’ve killed Captain Clown!’

The frightening android appeared in the fifteenth episode of the first season of Batman: The Animated Series, ‘The Last Laugh.’  

Armory

A former Special Forces operative, Jim Tate later acquired advanced degrees in electronics and engineering, with which he made an impressive career as a small arms weapons designer.  After he was fired from Wayne/Powers, Tate became desperate to maintain his tony lifestyle.  Utilizing his training and expertise in experimental weaponry, he became the villainous Armory yet was ultimately taken down by Batman.  

Actor Dorian Harewood provided the voice for the Jim Tate with the character first appearing in the tenth episode of the first season of Batman Beyond, ‘Spellbound.’ 

Nitro

An explosives expert and arsonist, ‘Nitro’ Nelson took great glee in blowing things up.  He was hired by Roland Daggett to set off a series of bombs that would level the Park Row neighborhood of Gotham.  Actor David L. Lander provided the voice for Nitro, with the villain appearing in the twelve episode of the first season of Batman: The Animated Series, ‘Appointment in Crime Alley.’  

Golem

Nelson Nash was a student at Hamilton High School who was frequently bullied by a fellow student.  Pushed too far, Nelson decided to get his revenge by stealing a Galvanic Lifter Machine so to destroy his tormentor’s car.  This Galvanic Lifter Machine (nicknamed a ‘golem’) was an enormous robotic loading device with a roughly humanoid shape.  The machine was operated by way of a neural-syncing headband that enabled the operator to control it through mental command.  

After destroying the car, Nelson used the Golem to menace another classmate he had a crush on.  At this point Batman interceded and debilitated the Golem unit with an electrified battarang that caused it to short circuit and shut down.  The feedback into the neural headband caused Nelson to be shocked into unconsciousness.  When he awakened, however, he found that had somehow cultivated psychic powers that enabled him to control the Golem even without the rural headband.  

Actor Seth Green provided the voice for Nelson Nash with the young villain and his robotic companion first appearing in the fourth episode of the first season of Batman Beyond, ‘Golem.’  

Garth

An early subject outcome of Doctor Dorian's experiments, Garth was a gorilla with enhanced intelligence and other rudimentary human-like capabilities.  Not as refined a subject as Dorian’s later creation, Tygrus, Garth did prove useful as muscle to execute the scientist’s schemes.  

Actor Jim Cummings provided the voice for Garth, with the brute appearing in the thirtieth episode of the first season of Batman: The Animated Series, ‘Tyger Tyger.’ 

Ian Peak

An ambitious and unscrupulous television journalist, Ian Peak was the host of ‘The Inside Peak,’ an infamous tabloid newscast that dished the dirt on the influential people of Gotham City.  After stealing an experimental intangibility belt from a scientist, Peak used the belt to garner all manner of secrets regarding the luminaries of Gotham.  He even discovered Bruce Wayne’s secret identity as Batman.  Unfortunately for Peak, however, the belt ultimately caused his body to lose structural integrity and he perished when his body defended down into the earth’s core.  

Actor Michael McKean provided the voice for Ian Peak with the villainous paparazzi appearing in the eighteenth episode of the second season of Batman Beyond ‘Sneak Peak.’   

Doctor Belson

Gregory Belson was a transplant surgeon who had previously worked in the  cryogenics laboratories at GothCorp where he was a colleague of Victor Fries.  A series of poorly thought through investments resulted in Belson’s finding himself in a dire financial situation.  Mr. Freeze was able to leverage Belson’s debts as a means of getting him to conspire with him in a dastardly plot.  This resulted in the craven Belson meeting a fiery end.  

Actor George Dzundza provided the voice for Dr. Belson, appearing in the animated feature, Batman & Mr. Freeze: Sub-Zero.

The Repeller

Dr. Suzuki was a researcher working in the medicinal technologies department of Wayne-Powers.  He and his colleague developed the ISO field generator rings which could generate a magnetic forcefield around a living being.  Suzuki stole the device and used it to commit crimes as the villains ‘Repeller.’  Batman was ultimately able to surmise the Repeller’s true identity and take the villain down.  

Actor Gedde Watanabe provided the voice for the Repeller with the villain appearing in the second episode of the third season of Batman Beyond, ‘Untouchable.’   

Vincent Starkey

Also known as ‘The Shark’ Vincent Starkey was a mobster and drug dealer who had previously been put away by Detective Harvey Bullock.  When Bullock was receiving death threats, he was certain that the recently paroled Starkey was behind them.  Aided by Batman, The Shark was taken down as he was starting up a new narcotics racket.  Although it turned out that it was actually Bullock’s landlord who was behind the death threats.  

Actor Gregg Berger provided the voice for Vincent Starkey with the villain first appearing in the fourth episode of the fourth season of Batman: The Animated Series, ‘A Bullet for Bullock.’  

Falseface

The mysterious mercenary known only as Falseface possessed the ability to shape the contours of his face so to imitate any man of his size and stature. The villain was hired by the terrorist organization known as Kobra to smuggle a deadly virus into Gotham.  The plot was thwarted by the combined efforts of Batman and Stalker.

Actor Townsend Coleman provided the voice for Falseface with the villain appearing in the twenty-first episode of the second season of Batman Beyond, ‘Plague.’  

Montague Kane

Doctor Montague Kane traveled around the world publishing works on debunking the supernatural.  He showed a particular interest in magicians, revealing to the public the non-magical ways of how their illusions worked. 

The stage magician known as Zatanna was aware of Kane's reputation.  Revealing the secrets of stage magic was very much frown upon and Zatanna was eager to stump him with a trick he would not be able to figure out.  Although Zatanna was practiced in real magic, she relied on traditional sleight of hand in her stage act.  And she had created an illusion utilizing mirrors that would make it appear as though ten million dollars had disappeared from the Gotham Mint.

Kane was actually a cheat and a thief.  He learned how Zatanna was planning to pull off her trick and seized upon it as a means to steal this money for himself.   And Kane's expertise of illusions allowed him to rig the trick so that it would seem the money was there, while it was already stolen.

Kane and his lacks tried to make a quick getaway with the stolen money but were stopped by Batman and Zatanna.  Kane was delivered to the police and Zatanna was cleared of all charges.

Actor Michael York provided the voice of Montague Kane with he villainous skeptic appearing in the fiftieth episode of the first season of Batman: The Animated Series, ‘Zatanna.’

Bigtime

Charlie ‘Big Time’ Bigelow was an ambitious hoodlum and former friend of Terry McGinnis.  Three years prior to Terry becoming Batman, Charlie and Terry were arrested for burglary.  Charlie was eighteen and tried as an adult, resulting in a three year prison term; whereas Terry was still a minor and hence avoided jail time.  

Following his release, Charlie fell in was a gang of thieves who planned to steal an experimental chemical from a Wayne-Powers facility.  

The robbery went awry and Charlie ended up doused in the mutagenic chemical.  This caused him become physically deformed, yet also bestowed him super human strength and durability.  Going by the alias of ‘Big Time’ Charlie used his newfound powers to become a super villain and had multiple altercations with Batman.

Actors Stephen Baldwin and Clancy Brown provided the voice for the villain, first appearing in the fourth episode of the third season of Batman Beyond, ‘Big Time.’  

Mutro Botha

The killer known as Mutro Botha was a top lieutenant within the mysterious Society of Assassins.  When the Society found itself hunted by Curaré, Botha attempted to extort Batman into protecting him.  The plan did not work and Botha ended up killed by Curaré.  

The legendary Tim Curry provided the voice for Muto Botha, with the desperate criminal appearing in the fifteenth episode of the second season of Batman Beyond, ‘The Final Cut.’  

[whirligig-girl]

Eaurp Guz's roughly 1:30 scale live-steam model of Slaibsgloth Coal Railroad No.32, a ~1.6 meter gauge 2-8-8-2 garratt steam locomotive built on planet Mellanus in (earth-)year 2346 and retired in 2379 (two years ago) for service bringing coal carriages from the coal pits up to the interchange at the Glooiw & North Eastern. It is unusual for a coal burning steam engine to remain in revenue service--the majority that remained in use after the development of Diesel-Hydraulics were decommissioned with nuclear-powered railway electrification in the 2360s, and the ones that remained were mostly converted to oil burning. The Slaibsgloth steam engines meanwhile persisted right up until the closure of the coal mine. Glooiw & North Eastern has acquired the 40 locomotives. Their fates are uncertain but railway preservation groups remain optimistic.

When Guz first came aboard the Cerritos she was overworking herself constantly, which lead to her being so tired that she was leaving residues on the consoles and generally doing sloppier work. It turned out that Guz had been working double shifts, and when Billups found out he put a stop to that. That's when Guz turned to a hobby she'd done a lot of before joining starfleet--model rocketry. Armed with far more advanced tools than she'd had on Mellanus, she made accurate working model replicas of real historical prewarp spacecraft from a variety of planets and would fly them in real space whenever possible.

Eventually, she also found a new appreciation for her childhood love of trains, and her model-making skills and tools translated well to model railroading as well. She has a little shelf layout in storage that she occasionally tinkers with, and she runs large scale model trains on the holodeck. She could run full-scale holographic trains on the holodeck too of course, but it wouldn't be nearly as satisfying. And then there's the 1:5600 scale BM-gauge railroad she's building on a microscope slide! (Bµ gauge is "Byte micrometer" gauge or a track spacing of 256 µm)

Guz eventually wants to build a roughly 1:80 scale modular layout of the Slaibsgloth Coal Mine, with smaller scale electric-powered models of the Slaibsgloth coal-burning steam engines and enough track to wrap around a room and give them a good run, but unless she can rally support for a Cerritos chapter of the Starfleet Rail Transport Modelling Club or she can get her own crew quarters, it's a pipe dream--or maybe something for her retirement.

Replicators and advanced computer aided design tools reduce the amount of time it takes to get modelling projects done by whatever factor is desired. Technically Guz could probably replicate fully assembled working models as long as they fit in the replicator bed, but where's the fun in that? But she's still only got so much time in an off-shift, and doing it 'properly,' scratch-built using machine tools like 'real' modellers on Mellanus, or manually defining all of the geometry in a CAD program like modellers on Earth, would take too much time.

see also: alt versions of the locomotive.

[nineoftoads]

im a CAD expert

I'm tasked with designing our little internal 80-20 shelving unit that goes inside our oven and I've never used this stuff before or designed or built basically anything so this is exciting, if a little daunting. but there's an online little CAD program by the 80-20 company itself that can help u draft up your concept. and mine is basically a box frame with some support bits for like, drawer slides... and probably cable management, somehow.

[lonniemachin]

Nagham reached out to me to help share her family's fundraiser. Yasmeen Ouda is urgently raising money to evacuate her family from Gaza to Canada. They have currently only made $13,850 CAD out of their $50,000 goal, a little under 1/4th of the way there! Please donate and share, and if you can't donate, please still share!

Yasmeen's Twitter/X account: @Jasmeen217

From Yasmeen's GFM:

Hi everyone,

My name is Yasmeen Ouda, I am Palestinian born and raised in Gaza city, I moved to London Ontario 4 years ago with my husband. I am raising this fund to help my family flee the war and come safely to Canada and reunite with me and my kids again.

I'm writing to you at a really critical and urgent moment. Presently, my family is in Gaza and is dealing with unspeakable conditions. My family and I are fervently requesting your assistance so that we can help them flee to safety and reunite with me in Canada. I live in Canada with my 2 kids , yet I feel like I'm thousands of miles away from my family and are helpless to stop the suffering caused by ongoing aggression in Gaza. The situation is getting worse every day, and I worry about their safety.

I've been putting my family before myself since the beginning of the war. My heart shatters into even more pieces and hurts more each time I say this but they have already made evacuations inside Gaza with no safe place to go to. They didn’t manage to take any of their belongings except some clothes and important documents as the Israeli occupation forced them to evacuate immediately. Even by evacuating to the safe area as the Israeli claims they have witnessed so many bombs and death everywhere but they have miraculously survived each time.

Recently, Canada announced a program stating that immediate families of Palestinians with Canadian citizenship or permanent residency will be eligible to remain in Canada for three years in a move designed to bring them to safety while war rages in Gaza between Hamas and Israel.

I was overjoyed to hear this news because it gave me hope that, after this extremely difficult period, I would be reunited with my family. However, my joy was tinged with bitterness since I knew that they would not be able to pay for the rent or even the exorbitant living expenses in Canada

My brother is expecting his first child in May 2024 , after 1 year of marriage. he is very worried about this baby after having one miscarriage before and wish to take his wife and baby to safety but he won't be able to afford the costs of the delivery in Canada or even provide for his baby's needs at least for a while until he settles down and finds a job.

My sister is a 4th year medical student, she is studying in the Islamic university of Gaza. She's passionate about her major and dreaming of becoming a doctor but the Israeli occupation has shattered her dream into pieces when they bombed the university and turned it into aches. Now, she has a new opportunity to fulfill her dream again here in Canada, but studying in Canada is expensive and she will never make it without your help and support.

It is extremely difficult and demanding to start over in a new country without any savings, especially for people who are already fleeing the war and have nothing left for them. However, you may assist them by helping them with the initial steps of their new journey.

Your support, no matter how small the contribution, means more than mere financial aid. It's an expression of your solidarity, compassion, and humanity, granting her a chance at a new, secure life .Together, we can make a difference, rebuilding a life and dreams from scratch. Each donation, regardless of size, contributes to their new start.

[aurorangen]

10 Random Facts About Me

I was tagged by @druidberries and @faerun-s thank you so much 🥰

My height is 173cm and I am a Virgo ♍️

The other day, I went to the hairdressers for the first time in 3 years 😂 my mum usually cuts my hair every few months (no need to pay haha). She cuts 1-2 inches off the bottom and trims my curtain fringe a bit every time. I have a kind of wolf cut now, not too far off my usual style, but still, a bit different.

Binge-playing the sims is really hard for me because I get distracted easily and PROCRASTINATION 🙃. Mostly I play during the weekend to destress from life, but it was a few hours at a time. It was like a personal record posting daily and that was when I was really into it!!! I think I would be posting a lot more if not for this, plus I had several burnouts/breaks throughout the years. Playing two legacies really helped my motivation and it also kept my simblr alive 👍

Continuing from the previous! I'm a perfectionist and I'm really picky with my posts. 2-3 hours would be waiting for the game to load, letting the game do its thing for a bit, setting out scenes, then taking the pics. It's like making a movie 🎬 And that would only result in one post (no editing yet). I'd have planned what I wanted to do that day and written all my text/dialogue as I feel I don't want to play if idk what I'm doing.

I'm very clumsy!!!! The amount of times I have walked into something or banged my foot. This is TMI but I have broken my big toenails more than once lmao one time it was from playing basketball (I'm no good at it…and I was wearing sandals) and I dribbled it on my toe 😞

I have had bad acne in the past and have tried so many products to help with my skincare. My skin is a lot better now and mainly acne scars remain. Also drinking milk makes me break out and I didn't know it was a trigger back then. I have soya milk instead and it tastes just as good in tea (I love drinking tea).

I get motion sickness when playing particular games. I used to be fine, but one day I played COD with my brother and just couldn't handle the first-person view I was SICK 😵‍💫 I prefer third-person view in any game, but I still get dizzy if playing for too long. Sims is great because it's like GOD PERSON VIEW 😂 With games, I don't really play a lot now and sims is the only one!

I had no fizzy drinks for 5 years one time!!! I thought "let's see how long I can hold out for". During my first year of uni, I had a really bad flu and nothing helped. My mum told me to boil coke and ginger together (it's an old Chinese remedy lol) and it helped like MAGIC 🤩 There went my 5 years of cutting it out and now I drink it sometimes!

I was close to studying architecture at uni. I studied computer science and 3d design at A level, but was unsure of an artsy route or technical one. I loved both and I knew I wanted to do something with maths. In the end, I went with engineering because it had more opportunities with me still being able to program (thanks to robotics and electrical modules), design stuff (with CAD) and lots more 😊 IG that's why I live my architecture dreams through building in sims!! Speaking of...

I HAVE 🎓GRADUATED🎓 (graduation ceremony was the other day 🤭). The final year was really tough for me but I can't believe I have completed my undergraduate studies!!!

I will tag: @mikachusblog @duusheen @mdshh @sharona-sims @gingenr but feel free to ignore this 💖

[frakyeahbattlestargalactica]

Monty Jaggers McGraw:

I am writing new BASIC programs to demo at my VCF Southwest 2025 exhibit of my 1979 Tektronix 4054A color vector graphics computer.

One of the programs I am writing is a 1978-1979 Battlestar Galactica TV demo. That TV show had $500,000 of Tektronix vector graphics computers and test equipment and many screenshots of their green vector storage CRT displays - some stills - some animated. These computer graphics were generated on both 1975 4051 and 1976 4081 vector graphics computers - predecessors to my 4052 and 4054A computers (see first photo attached).

Miami Herald TV 1978 magazine interview with the Battlestar Galactica set designer indicated extras on the set stationed in front of the 4051 computers were playing games during filming to increase realism and were so absorbed they kept playing after the cut! (article page attached).

The 4051 and second generation 4052 were the same physical size and used the same CRT and same Display board, but the 4052 and 4054 computers replaced the 800KHz Motorola 6800 CPU with a custom four AMD2901 bit-slice CPU to create a 16-bit address and data bus ALU which emulated the 6800 opcodes and added hardware floating point opcodes to speed up these computers 10x over the Motorola 6800, doubled the BASIC ROM space to 64KB and doubled the RAM space to 64KB!

I created these vector bitmap graphics using a "3D CAD" picture I found on the web of the Battlestar Galactica (last attachment).

As far as I know - there was never any 4050 BASIC program to view bitmap pictures on any of the 4050 computers. The 1979 4014 vector graphics terminal had a grayscale bitmap mode in the Extended Graphics option board, but I have only found a couple of bitmap 4014 images on a single Tektronix demo tape cartridge.

My 4050 BASIC program to display bitmaps works on all 4050 series computers - with an optional Tektronix 4050R12 Fast Graphics/Graphics Enhancement ROM Pack. This ROM Pack speeds up displaying vector images (including vector dot images) 10x over using BASIC MOVE and DRAW commands.

The Battlestar Galactica bitmap image in R12 binary format is 332234 bytes - slightly larger than would fit on a DC300 quarter-inch tape cartridge in the internal tape drive of all three 4050 computers, but would have fit on a 3M DC600 tape cartridge with a capacity of 600KB - it would have been very slow to load.

I designed an Arduino board to emulate the Tektronix 4924 GPIB tape drive - with the help of my software developer. My GPIB Flash Drive board contains a MicroSD card with gigabytes of storage and the Flash Drive emulates a GPIB tape changer, storing all the files of a "tape" in a single directory. I have also attached to this post a photo of my GPIB Flash Drive.

I have recovered almost 100 Tektronix 4050 Tapes and posted the ones I think are the most interesting at this time on my github repository for Tektronix 4051/4052/4054 computers: https://github.com/mmcgraw74/Tektronix-4051-4052-4054-Program-Files I included Tektronix published MATH volumes 1, 2, and 3 and Electrical Engineering, but I don't think they have a lot of use today. I have in my collection but not recovered tapes on Project Management, Statistics, and over 100 more tapes from the very active user group, which Tektronix made collections and published abstracts in their newsletter and the newletter customer got the tape for free. Commercial software like CAD programs were likely encrypted to eliminate copying - since Tektronix 4050 BASIC included a SECRET command which would then encrypt the program file as it was recorded to tape and add a SECRET flag in the tape header that would signal to BASIC ROM when that file was accessed to decrypt the program when it was loaded into memory. One big limiter to the size of the program was RAM in the 4051 was limited to 32KB and the 4052 and 4054 were limited to 64KB of RAM, although Tek BASIC did include commands to allow program "chunks" to be overlayed as necessary. Tektronix used those commands in their 4050 System Tape which was shipped with every system and included a tutorial on many of their BASIC commands. The tutorial ran on the original 4051 with 8KB of memory, and if the program detected 16KB of memory it would APPEND larger program files to speed up the tutorial.

[carlyraejepsans]

If you are going to make a game here’s some things that might be helpful!

Game engines:

Godot: very new dev friendly and it’s free. Has its own programming language (GDscript) but also supports C#. It’s best for 2D games but it can do 3D also.

Unity: I don’t even know if I should be recommending Unity. It has caused me much pain and the suffering. But Unity has an incredible amount of guides and tutorials. And once you get the hang of something it’s hard to get caught on the same thing again. It also has a great Visual Studio integration and uses C#. I will warn you the unity animator is where all dreams go to die. It’s a tedious process but you can probably get some plugins to help with that.

Unreal: Don’t use it unless you’re building a very large or very detailed 3D game. It also uses C++ which is hell.

Renpy: Made for visual novels but has support for small mini games. It only supports Python iirc. Basically if you’re making a VN it’s renpy all the way otherwise you should look elsewhere.

What to learn: Game design and how to act as your own game designer. As a designer you need to know if a part of your game isn’t meshing with the rest of it and be willing to give up that part if needed. Also sound design is very important as well. If you want to make your own sounds audacity is perfect for recording and cutting up your clips. If you want to find sound effects I recommend freesound.org and the YouTube royalty free music database.

Sadly I can’t recommend a lot of places to learn this stuff because I’m taking Game Development in Uni. So most of my info comes from my lectures and stuff. One of my game design textbooks is pretty good but it’s around $40 CAD. It’s called the game designers playbook by Samantha Stahlke and Pejman Mirza-Babaei if you’re interested (fun fact there’s a photo of Toriel in there)

Anyway sorry for dumping this large ask on you I’m just really passionate about game design and I like to see other people get into it.

please do not apologize I'd never heard half of this stuff so this is super useful!! I've seen some godot tutorials on YouTube although so far I've played around with RPG maker MV (it was on sale. very very fiddly interface, i had trouble getting around it) and gamemaker, which recently became free for non-commercial use (a lot more approachable on first impact but like i said, haven't really done anything substantial in either yet).

mostly, I'm still in the super vague stage. I've got an idea for the main story conflict, the protagonist and their foil, the general aesthetic i want to go for (likely 2D graphics, but it would be cool to make like. small cutscenes in low-poly 3D) but not much else. haven't exactly decided on the gameplay either! it's gonna necessarily be rpg-esque, but I'm not much of a fan of classic turn-based combat so. I'm gonna check out other games and see if i can frankenstein anything cooler :P

[iigjaipur]

Discover the future of jewelry design with our in-depth exploration of CAD in Jewellery Designing. Explore how CAD technology is revolutionizing the traditional methods, enabling intricate designs and precise detailing. Dive into the fascinating intersection of technology and artistry, unveiling the limitless possibilities and advancements reshaping the landscape of contemporary jewellery designing. Elevate your understanding of this transformative trend and its impact on the evolving world of jewelry creation.

[paracosmicka]

Hey! I love your art so much 💖 I wanted to ask what program you use for 3D modelling?

aw thank you!! :3

and to answer your question i’m going to warn you this is going to be kinda long because i’m gonna use this post as an excuse to show my 3D models that aren’t awful (sorry lol).

i actually use two different programs, both for different purposes, but you don’t need to get both, it really depends on which kind of modeling you want to do.

1) the first is called Nomad Sculpt on the iPad, you do have to pay for it unfortunately but it’s definitely one of the best modeling apps for the iPad. i know Blender is free but my computer is really old and doesn’t run the program very well, and at this point i’ve already gotten used to nomad sculpt.

anyway tho, i use it for art-related things like the obvious 3D models, but recently i’ve been playing around with just making scenes to use as references for my drawings. they’re not anything impressive, most of the time i actually use it to make little figurines to print and turn into earrings/little friends that sit in my room just for fun.

i’m gonna show this first bc they look cooler once they’re printed and colored (also you can tell i printed mini crowley and aziraphale when my sonadow hyperfixation started bc i never actually painted crowley) (he’s just kinda sitting there oops).

the little red guys are actually my favorite bugs (goliath beetles), i made them about a year ago but i still wear them like every day.

and here’s what they look like in the app, it’s a little intimidating but once you get used to it it’s actually kinda fun just playing around and seeing what you can do.

2) the second program i use is Shapr3D (also for the iPad, but i think they made an update where you can run it on windows/mac). you also have to pay for this as a subscription which sucks, i’m only able to use it since the engineering program i’m in pays for it.

Shapr3D is one of the many CAD software programs out there, but it’s nice bc it’s very beginner friendly and very easy to use. CAD is mainly for architecture/engineering but i honestly think more 3D artists should give it a try. it’s really nice once you get the hang of it and (i’m probably biased bc i’m a student) i honestly prefer it over just normal modeling software because i feel like you can be a lot more creative with it.

right now for my engineering class, our semester final is to design and present something that’s functional, and we can either explain the math behind it or just 3D print it and demonstrate how it works, and i’m making a functional mini model of “the rack” trap from Saw III (i’m not psychotic i swear i’ve just had a Saw hyperfixation for 5 years).

i’m definitely gonna post it when it’s finished just bc i’m already excited with how it’s turning out, but for now here’s a couple at-home projects i’ve done:

(above) i have a bunch of wet liners and i designed a stackable holder thingy with bolts between the shelves and a little cute star screw to fasten it at the top.

(above) i also made a few rotating brush holders at home (bc the ones that actually rotate are like $40 for some reason) by buying a set of small sphere bearings at home depot for like $5 (that’s what those little metal things are inside the third one, i took it apart bc i don’t know how to put a video and a picture in the same post) (just pretend they’re spinning rn).

anyway that’s all!! if you actually read this whole thing i love you so much bc engineering and design is one of my special interests so thanks for letting me tell you about the silly things i’ve made :3

[commodorez]

What kind of work can be done on a commodore 64 or those other old computers? The tech back then was extremely limited but I keep seeing portable IBMs and such for office guys.

I asked a handful of friends for good examples, and while this isn't an exhaustive list, it should give you a taste.

I'll lean into the Commodore 64 as a baseline for what era to hone in one, let's take a look at 1982 +/-5 years.

A C64 can do home finances, spreadsheets, word processing, some math programming, and all sorts of other other basic productivity work. Games were the big thing you bought a C64 for, but we're not talking about games here -- we're talking about work. I bought one that someone used to write and maintain a local user group newsletter on both a C64C and C128D for years, printing labels and letters with their own home equipment, mailing floppies full of software around, that sorta thing.

IBM PCs eventually became capable of handling computer aided design (CAD) work, along with a bunch of other standard productivity software. The famous AutoCAD was mostly used on this platform, but it began life on S-100 based systems from the 1970s.

Spreadsheets were a really big deal for some platforms. Visicalc was the killer app that the Apple II can credit its initial success with. Many other platforms had clones of Visicalc (and eventually ports) because it was groundbreaking to do that sort of list-based mathematical work so quickly, and so error-free. I can't forget to mention Lotus 1-2-3 on the IBM PC compatibles, a staple of offices for a long time before Microsoft Office dominance.

CP/M machines like Kaypro luggables were an inexpensive way of making a "portable" productivity box, handling some of the lighter tasks mentioned above (as they had no graphics functionality).

The TRS-80 Model 100 was able to do alot of computing (mostly word processing) on nothing but a few AA batteries. They were a staple of field correspondence for newspaper journalists because they had an integrated modem. They're little slabs of computer, but they're awesomely portable, and great for writing on the go. Everyone you hear going nuts over cyberdecks gets that because of the Model 100.

Centurion minicomputers were mostly doing finances and general ledger work for oil companies out of Texas, but were used for all sorts of other comparable work. They were multi-user systems, running several terminals and atleast one printer on one central database. These were not high-performance machines, but entire offices were built around them.

Tandy, Panasonic, Sharp, and other brands of pocket computers were used for things like portable math, credit, loan, etc. calculation for car dealerships. Aircraft calculations, replacing slide rules were one other application available on cassette. These went beyond what a standard pocket calculator could do without a whole lot of extra work.

Even something like the IBM 5340 with an incredibly limited amount of RAM but it could handle tracking a general ledger, accounts receivable, inventory management, storing service orders for your company. Small bank branches uses them because they had peripherals that could handle automatic reading of the magnetic ink used on checks. Boring stuff, but important stuff.

I haven't even mentioned Digital Equipment Corporation, Data General, or a dozen other manufacturers.

I'm curious which portable IBM you were referring to initially.

All of these examples are limited by today's standards, but these were considered standard or even top of the line machines at the time. If you write software to take advantage of the hardware you have, however limited, you can do a surprising amount of work on a computer of that era.