#architecturalcommericalproducts

[weareinyourcorner]

Wall and Door Protection Products for Retail and Commercial Spaces

High-traffic areas like airports, hospitals, warehouses, kitchens, etc. can damage your interior spaces. Retail and commercial buildings need products to maintain and protect them. The interior and exterior of these facilities, though different need extra protection. 

Finding the best products to protect your building can be difficult. Whether you are a designer (architectural or interior), contractor, DIY, or a facility owner/manager working on a retail or commercial project we've got you covered. At Boss Corner Guards, you will find all the protection products you may need for your facility. Let's look at the products:

Wall Protection Products

All our products are steel, aluminum checker plate, or stainless steel. We offer different profiles, standard or heavy-duty, to ensure we meet your needs.

Corner guards protect your walls from impact damage and protect your wall edges.

End cap guards protect your walls, corners, and ends from damage.

Wall Trim-Baseboards cover the area your wall meets the floor from damage in high traffic areas

Wall trim-Crown Molding protects your walls where the wall meets the ceiling from damage.

Door Protection Products

Armor plates protect the lower half of the door from damage by pushcarts, wheelchairs, and other equipment use.

Kick plates protect the push side of the door for facilities with high service, like hospitals, bars, or restaurants.

Push plates protect the doors' finish. Used on doors without handles or door knobs. A person uses the push plate to push the door open.

Mop plates protect the door's pull side from constant foot traffic, cleaning, or equipment.

Stretcher plates protect the doors' finish. Used on doors without handles or door knobs. A person uses the stretcher plate to push the door open.

Retail and commercial spaces incur very high traffic. Damage from moving people and equipment can damage your building structure. Grocery stores, bars, restaurants, hospitals, and more spaces must protect their investment in their interior spaces. Using our protection products will save you repair costs and increase the longevity of your building.

You can find our products online in our store or order a custom-made product with your specific measurements. Please consult with our team for the best product to use for your specific need. Contact us with any queries.

[weareinyourcorner]

[weareinyourcorner]

[weareinyourcorner]

Using Corner Guards in the Hospitality Industry

The hospitality and tourism sector, airports, restaurants, hotels, etc., are characterized by heavy human traffic. Travelers often carry, push and pull their luggage through these areas, and by simply being in a rush or being careless, damages wall corners, and other surfaces occur often. In this context, such architectural hardware products as corner guards and wall end cap guards come in handy to protect wall corners against wear and tear. Have you safeguarded your wall corners using Boss Corner Guards?

 

What is a Corner Guard?

A corner guard is a protective component used to preserve the edges of a building's interior or exterior walls from being damaged through impact. A corner guard can be made of aluminum, aluminum checker plate, stainless steel, and steel. The most preferred corner guards are stainless steel as they offer considerable protection to walls and look great.

 

Where can we use Corner Guards?

Just about anywhere, corner guards are normally used in places with a high human traffic. They are especially used in airports, restaurants, garages, retail stores, commercial kitchens, offices, workshops, concert venues, warehouses, hospitals, hotels, etc. They were designed for walls, but we have had customers protect equipment, vehicles, etc.

 

How do we install Corner Guards?

Corner guards are fixed to walls using adhesive or screws (holes are an additional charge). The main advantage of corner guards is that they last long without being replaced. When you purchase Corner Guards they come with installation instructions, they are very easy to install and virtually require no tools.

If you would like to protect your facility’s walls against any damage occurring due to impact, please don't hesitate to contact us.

Here at Boss Corner Guards, we offer the best corner guards solution to all your commercial construction. Be sure to stop by our Website for more Wall & Door Protection products.

[weareinyourcorner]

[weareinyourcorner]

BOSS Door Protection Products

In institutional and commercial buildings, interior door protection is an important component for frequently used doors. Considering that some people enter doors with their feet while others use carts and other devices to push stretchers and equipment. Building owners should consider the type of door protection they should install based on the type of protection they need. For a great solution, BOSS Wall and Door Protection products offer a range of tailored door plates.

Armor Plates 

Armor plates offer the most protection and are typically installed on the push side of the door. Armor plates come in different sizes depending on the protection required, but the most common is 36 inches and 42 inches tall. 

Kick Plates

Kick plates, just as the name suggests, are installed on doors that are normally pushed open by foot. Similarly, to Armor plates, kick plates are installed on the push side of a door. A kick plate are typically  10 inches to 16 inches high. For areas where wheelchairs are commonly used, 16 inches is a recommended height.  They provide sufficient protection for the bottom part of the door. 

Mop Plates

Mop plates protect the pull-side of the door. They protect the door from damage caused by mops and vacuum cleaners. They are as typically 4 to 8 inches high and installed at the bottom part of the inner side of the door. 

Push Plates

Push plates are best for non-latching doors, allowing one to open a door without using the handles or doorknobs. They protect the door finish from accumulating oils and dirt. Push plates are best for swinging doors.  

Stretcher Plates

Stretcher plates are mostly installed on hospital doors where there is constant in and out movement of stretcher beds. They are installed on both sides of the door to protect against wear and tear in areas where the stretcher bed crashes into.  At BOSS Wall and Door Protection, we also offer to manufacture customized plates for various doors at an affordable price. To learn more about these products, visit the BOSS Wall and Door Protection products' newly launched website, http://www.cornerguardsonline.com/. We hope to help you find the perfect solution for your interior door protection needs.

[weareinyourcorner]

Save Time and Money in Commercial Construction with Corner Guards and End Cap Guards

Corner Guards and Wall End Cap Guards work as a shield for wall corners giving protective coverage your all-too-vulnerable corners require. They are also an important interior design décor fixture, and their affordability makes them an easy decision for any commercial or retail space. Our website cornerguardsonline showcases our extensive selection of corner guards and other wall and door protection solutions. Let's explore how their all-around coverage of corner guards can save you time and money.

Punishable but forgiving walls 

Wall protection products such as Corner Guards and Wall End Cap Guards provide splash, abrasion, and impact protection to prevent walls from looking rundown, chipped, and discoloured. In other words, let the Corner Guards and Wall End Cap Guards take the beating so your walls don't. Daily traffic magnifies the wear and strain on business spaces, but it is the walls and corners with which we contact that are most vulnerable to harm. 

We manufacture our Wall and Door protection products in both Aluminum Checker Plate and Stainless Steel which are durable materials and commonly used in commercial construction and frequently used in retail stores, commercial kitchens and restaurants, transit stations, airports, and healthcare facilities.

Cost-saving walls

Architectural Hardware products such as our wall protection guards increase the durability of the architectural and interior design by protecting the wall finishing (wall paint, paper or other covering or finishing) from damages. The result is avoiding the cost of regular repainting and replacement of worn materials.

If your walls and corners started off pristine but have now degraded to blemishes, dings, bumps, and scratches, it is time to fix them. We offer a variety of standard stock sizes of guards to quickly fix your walls at affordable prices, and quick delivery. Need custom sizes, we do that to. Contact us today with your needs.

Time-saving walls

You could lose productive work hours each time you have to do maintenance, interior renovations, or remodelling. Look to BOSS Corners Guards for your architectural and interior décor hardware solutions and for aiding to reducing downtime and time spent taking 'intensive' care for walls and surfaces.

Hygienic walls

The simplicity of our wall guards, trim and door plates only require a simple wipe down to clean and this makes them perfect for commercial spaces with walls that can easily be grimy like restaurants, kitchens, healthcare facilities, and high traffic areas. An important consideration when hygiene and personal care in public spaces are coming into sharp focus.

Designers must take all considerations into account when trying to marry the aesthetics and structure of the space and selecting products that will last for the duration of their usage.  Contact us now for solutions to complement any space, store, or boutique.

[weareinyourcorner]