#SRAM in microprocessor
Explore tagged Tumblr posts
stnl2yobb · 5 months ago
Text
https://www.futureelectronics.com/p/semiconductors--memory--RAM--static-ram--asynchronous/cy62167ev30ll-45bvxit-infineon-8026254
SRAM memory card, SRAM memory chips, Static ram, SRAM memory
CY62167EV30 Series 16 Mb (1M x 16 / 2 M x 8) 3 V 45 ns Static RAM - FBGA-48
1 note · View note
campuscomponent · 6 months ago
Text
Features ESP32-WROOM-32UE - Campus Component
ESP32-WROOM-32 UE are two powerful, generic Wifi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. ESP32-WROOM-32 UE with an IPEX antenna. They both feature a 8 MB external SPI flash. The integration of Bluetooth®, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is all-around: using Wi-Fi allows a large physical range and direct connection to Internet through a Wi-Fi router, while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection.
The sleep current of the ESP32 chip is less than 5 μA, making it suitable for battery powered and wearable electronics applications. The module supports a data rate of up to 150 Mbps, and 20 dBm output power at the antenna to ensure the widest physical range. As such the module does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity.
ESP32-WROOM-32UE Features:-
MCU :
ESP32-D0WD-V3 embedded, Xtensa® dual-core 32-bit LX6 microprocessor, up to 240 MHz
448 KB ROM for booting and core functions
520 KB SRAM for data and instructions
16 KB SRAM in RTC
802.11b/g/n
Bit rate: 802.11n up to 150 Mbps
A- Wi-Fi :
MPDU and A-MSDU aggregation
0.4 μs guard interval support
Center frequency range of operating channel: 2412 ~ 2484 MHz
Bluetooth :
Bluetooth V4.2 BR/EDR and Bluetooth LE specification
Class-1, class-2 and class-3 transmitter
AFH
CVSD and SBC
Hardware :
Interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC
40 MHz crystal oscillator
4 MB SPI flash
Operating voltage/Power supply: 3.0 ~ 3.6 V
Operating temperature range: –40 ~ 85 °C
Buy ESP32-WROOM-32UE 8MB Flash, 448kB ROM, 536kB SRAM 2.4GHz ~ 2.5GHz Bluetooth V4.2 BR/EDR 40MHz crystal oscillator avaliable at the lowest price from Espressif Systems Distributor in India | Campus Component.
0 notes
govindhtech · 7 months ago
Text
RISC-V GPU Advances to Manage CPU and NPU Tasks
Tumblr media
A new RISC-V microprocessor is capable of handling CPU, GPU, and NPU tasks concurrently. A novel RISC-V micro processing chip design has been developed by X-Silicon Inc. (XSI) that integrates a RISC-V CPU core, RISC-V GPU acceleration, and vector capabilities onto a single device.
According to Jon Peddie Research, the CPU/GPU hybrid device is open-standard and would presumably be open-source as well. It is intended to perform a range of tasks, such as artificial intelligence (AI), that would typically be performed by dedicated CPUs and GPUs. The problem is that it is meant to accomplish all of this with significantly greater efficiency.
The new hybrid CPU/GPU is intended to be a “jack of all trades” machine. JPR claims that the industry has been looking for an open-standard RISC-V GPU that is adaptable and scalable enough to serve a range of sectors, such as IoT devices, virtual reality, and cars. The goal of this new RISC-V CPU and RISC-V GPU is to give manufacturers an open chip architecture that can handle whatever workload they want.
The chip from X-Silicon is unique from previous architectures since it integrates a GPU and CPU into a single-core architecture. This isn’t like the standard AMD and Intel designs, which have distinct GPU and CPU cores. Rather, the core is built to be able to handle tasks on both the CPU and the GPU. It sounds a lot like Intel’s shelved Lara Bee project in that regard, which tried to employ x86 for workloads such as graphics.
The chip makes use of the C-GPU architecture from X-Silicon, which combines GPU acceleration with a vector CPU core that is RISC-V. A 32-bit FPU and Scalier ALU are located in the RISC-V vector core of the architecture. Thread scheduler, Pasteurizer, Clipping Engine, Texture Unit, Neural Engine, and Pixel Processor are some of its features. The device is designed to handle applications such as 2D and 3D graphics, geometric computation, AI, and high-performance computing (HPC).
Theoretically, X-Silicon’s hybrid chip has numerous benefits due to its ability to process both CPU and RISC-V GPU code within its single core. The chip runs a single instruction stream on the open-standard RISC-V ISA for both the CPU and GPU. This results in higher performance and low-memory footprint execution since there is no data copying between the GPU and CPU memory spaces.
Manufacturers can increase processing power as needed by combining the CPU and RISC-V GPU cores into a multi-core design. A fast fabric is used to connect several cores that are tiled across a chip in a multi-core configuration. This also has fast on-chip SRAM or e DRAM caches, which function as an L2 cache capable of combining data from several cores. When necessary, each core can be scheduled to execute workloads unrelated to the others, such as physics, AI, graphics, video, and HPC.
RISC-V GPU
This architecture may allow X-Silicon’s C-GPU architecture to handle any kind of CPU or GPU workload. It is claimed by X-Silicon that Vulkan graphics API is already functioning with “fused RISC-V GPU acceleration.” This ought to be quite beneficial for its advancement and uptake on Android gadgets.
Unlike x86 and ARM, the new design is based on RISC-V, which means that anyone can use the architecture without having to pay instruction-set license fees. The chips could revolutionize the microprocessor business if they function as planned. Theoretically, what X-Silicon claims to have built is more versatile and competent than the existing conventional designs.
Although workloads from both CPUs and RISC-V GPU can be handled by a new RISC-V micro processor, the following summarizes the main distinctions between them:
Building A RISC-V CPU Core
All-purpose: Designed to perform an extensive range of functions, such as multitasking, managing system resources, and executing applications.
Sequential processing: Carries out commands one at a time. more effective when dealing with complicated branching and logic tasks.
Fewer cores: Usually has fewer cores (four to sixteen) that are better suited to specific activities.
Graphics Processing Unit:
Specialized processor: Made to handle graphics and video data quickly, especially for jobs requiring a lot of data to be processed in parallel.
Parallel processing: Is perfect for tasks involving repetitive procedures because it can handle multiple calculations at once.
More cores: Frequently contains a sizable number of parallel processing-optimized cores, in the hundreds or even thousands.
CPU vs GPU Upgrade
CPU: Comparable to an experienced chef who manages several meals at once, alternating between them and making sure each is prepared to perfection. GPU: Similar to a group of line cooks who work together to efficiently prepare big amounts of food by assigning each person to a specialized duty on an assembly line. Even if the RISC-V chip you described is capable of handling both workloads, for best results, it’s critical to grasp the advantages and disadvantages of each type of CPU.
Read more on Govindhtech.com
1 note · View note
nonsensebot · 1 year ago
Text
I'm 0 steps away from 3d rendering anything I want on a microprocessor with as much SRAM as 11% of the file size of doom
0 notes
glamourdj · 1 year ago
Text
Unleashing the Power of Semiconductor ICs
Introduction
Semiconductor Integrated Circuits (ICs) have revolutionized the world of electronics, enabling compact, efficient, and powerful electronic devices. These tiny wonders, made up of various electronic components on a single semiconductor substrate, play a crucial role in modern technology. In this blog post, we will delve into the fascinating realm of Semiconductor ICs, focusing on Audio ICs, Interface ICs, Logic Gate ICs, MOSFET ICs, Optocoupler ICs, Memory ICs, and Sensor ICs. Join us on this captivating journey as we explore the applications, working principles, and advancements in these essential IC categories.
Audio ICs: Enhancing Sound Experience
Audio ICs are designed specifically to process, amplify, and control audio signals. These ICs find applications in a wide range of audio devices, including smartphones, music players, home theater systems, and car audio systems. They play a crucial role in delivering high-quality sound with features like amplification, filtering, and audio signal processing. From delivering immersive music experiences to enabling crystal-clear voice calls, Audio ICs make our audio devices come alive.
Interface ICs: Bridging the Digital Divide
Interface ICs act as intermediaries, facilitating communication and data transfer between different electronic components or systems. They enable seamless connectivity by converting signals between different voltage levels, formats, or protocols. These ICs find applications in devices like USB interfaces, display controllers, and communication modules. With their ability to bridge the digital divide, Interface ICs empower diverse devices to work together harmoniously.
Logic Gate ICs: Building the Foundation of Digital Circuits
Logic Gate ICs are fundamental building blocks of digital circuits. They perform logical operations such as AND, OR, and NOT, enabling the manipulation and processing of binary data. These ICs are the backbone of digital systems, including microprocessors, memory units, and control units. Logic Gate ICs make complex computations and decision-making possible, providing the intelligence behind our digital devices.
MOSFET ICs: Powering Electronic Switching
Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) ICs are essential for power management and electronic switching applications. These ICs offer high efficiency, low power consumption, and fast switching capabilities. They find applications in power supplies, motor control, and various electronic circuits that require efficient power handling. MOSFET ICs play a crucial role in optimizing power usage and enabling energy-efficient electronic devices.
Optocoupler ICs: Isolating and Protecting Signals
Optocoupler ICs, also known as optoisolators, are designed to provide electrical isolation between input and output signals. They utilize light-emitting diodes (LEDs) and phototransistors to transmit signals without direct electrical connection. Optocoupler ICs are commonly used in situations where signal isolation, noise reduction, or protection against voltage spikes is required. They find applications in industries such as telecommunications, industrial automation, and medical equipment, ensuring reliable and safe signal transmission.
Memory ICs: Storing and Retrieving Data
Memory ICs are responsible for storing and retrieving digital data in electronic devices. These ICs come in various forms, such as Static Random Access Memory (SRAM) and Flash memory. Memory ICs are vital components of computers, smartphones, gaming consoles, and other data-intensive devices. They enable rapid data access, high-speed data transfer, and non-volatile storage, ensuring seamless user experiences and efficient data management.
Sensor ICs: Sensing the World Around Us
Sensor ICs are designed to detect and measure physical phenomena, converting them into electrical signals for further processing. They enable devices to sense various parameters such as temperature, pressure, motion, light, and proximity. Sensor ICs find applications in diverse fields, including automotive, healthcare, environmental monitoring, and consumer electronics. From enabling accurate navigation in smartphones to facilitating precise environmental monitoring, Sensor ICs make our devices smarter and more responsive.
Conclusion
Semiconductor ICs have reshaped the world of electronics, powering our devices with unprecedented functionality, efficiency, and miniaturization. In this blog post, we explored the remarkable applications and advancements in Audio ICs, Interface ICs, Logic Gate ICs, MOSFET ICs, Optocoupler ICs, Memory ICs, and Sensor ICs. These ICs play pivotal roles in delivering enhanced audio experiences, bridging digital gaps, enabling digital logic, managing power efficiently, providing signal isolation, storing and retrieving data, and sensing the world around us. As we continue to push the boundaries of technology, Semiconductor ICs will undoubtedly remain at the forefront of innovation, driving the next wave of breakthroughs in electronics.
0 notes
swarupkumarnath07 · 2 years ago
Text
Basic Understanding of AVR Microcontroller
AVR Microcontroller
If you are interested in learning how to program and control electronic devices, you might want to explore the world of AVR microcontrollers. These are small, low-cost and powerful chips that can be used for a variety of applications, such as robotics, home automation, gaming and more. In this blog post, I will give you a brief introduction to the basics of AVR microcontrollers and how to get started with them.
What is an AVR microcontroller?
A microcontroller is a device that contains a processor, memory and input/output peripherals on a single chip. It can be programmed to perform specific tasks by executing instructions stored in its memory. A microcontroller is different from a microprocessor, which is only the processor part and needs external components to function.
AVR is a family of microcontrollers developed by Atmel (now part of Microchip Technology). The name AVR comes from the initials of its creators: Alf-Egil Bogen and Vegard Wollan. AVR microcontrollers are based on the RISC (reduced instruction set computer) architecture, which means they have a simple and efficient instruction set that allows fast execution of code. AVR microcontrollers are also known for their low power consumption, high performance and ease of use.
Some of the features of AVR microcontrollers are:
- 8-bit or 32-bit processor cores - Flash memory for storing program code - SRAM for storing data - EEPROM for storing non-volatile data - GPIO (general purpose input/output) pins for interfacing with external devices - ADC (analog to digital converter) for reading analog signals - PWM (pulse width modulation) for generating analog signals - Timers and counters for measuring time and frequency - UART (universal asynchronous receiver/transmitter) for serial communication - SPI (serial peripheral interface) and I2C (inter-integrated circuit) for communication with other chips - Interrupts for responding to external events - Watchdog timer for resetting the device in case of errors
How to get started with AVR microcontrollers?
To start working with AVR microcontrollers, you will need some hardware and software tools. Here are some of the essential ones:
- An AVR microcontroller chip. You can choose from a wide range of models depending on your needs and budget. Some popular ones are ATmega328P (used in Arduino Uno), ATtiny85 (used in Digispark), ATmega2560 (used in Arduino Mega) and ATmega32U4 (used in Arduino Leonardo). - A programmer. This is a device that connects your computer to the microcontroller and transfers the program code to its memory. You can use a dedicated programmer, such as USBasp or AVRISP mkII, or an Arduino board as a programmer. - A breadboard. This is a board with holes that allow you to insert wires and components without soldering. You can use it to build circuits and connect your microcontroller to other devices. - A power supply. You can use batteries, USB cables or wall adapters to provide power to your microcontroller and circuit. - Some LEDs, resistors, capacitors, switches, sensors and other components. These are useful for creating various projects and experiments with your microcontroller. - An IDE (integrated development environment). This is a software that allows you to write, compile and upload your code to your microcontroller. You can use the official Arduino IDE, which supports many AVR models, or other alternatives, such as Atmel Studio or CodeVisionAVR. - A library or framework. This is a collection of code that simplifies the programming of your microcontroller by providing predefined functions and variables. You can use the Arduino core library, which is compatible with many AVR models, or other libraries, such as avr-libc or avr-gcc.
Once you have these tools ready, you can follow these steps to program your AVR microcontroller:
1. Connect your programmer to your computer and your microcontroller to your programmer. 2. Launch your IDE and create a new project or sketch. 3. Write your code using the syntax and functions of your chosen library or framework. 4. Compile your code and check for errors or warnings. 5. Upload your code to your microcontroller using your programmer. 6. Test your code by observing the behavior of your microcontroller and circuit.
Congratulations! You have just programmed your first AVR microcontroller!
What can you do with AVR microcontrollers?
The possibilities are endless! You can use AVR microcontrollers for various purposes, such as:
Making interactive gadgets and toys - Controlling motors, servos and relays - Reading sensors and displaying data - Communicating with other devices via Bluetooth, Wi-Fi or radio - Creating musical instruments and sound effects
If you are interested to understand more about the AVR microcontrollers, then you can go through the PiEmbSysTech AVR microcontrollers Tutorial Blog. If you have any questions or query, that you need to get answer or you have any idea to share it with the community, you can use Piest Forum.
0 notes
precisionlogictech · 3 years ago
Link
Find obsolete, discontinued, EOL, Last time Buys, Hard to find, and long lead time electronic products in stock/available. Immediate Price and Delivery.
Request A Quote Click Here
TYPES OF ELECTRONIC PRODUCTS
Audio ICs
Amplifier ICs
Chipsets
Clock & Timer ICs
Communication ICs
Networking ICs
Counter ICs
Data Converter ICs
Digital Potentiometer ICs
Driver ICs
Interface ICs
Integrated Circuits
Logic ICs
Microprocessors
Microcontrollers
Multimedia ICs
Power Management ICs
Programmable Logic ICs
Switch ICs
Semiconductors
Wireless ICs
RF Integrated Circuits
Memory ICs
Audio & Video Connectors
Automotive Connectors
Backplane Connectors
Board to Board Connectors
Card Edge Connectors
Circular Connectors
Connectors Obsolete
D-Sub Connectors
Ethernet Connectors
FFC/FPC Connectors
Fiber Optic Connectors
IEEE 1394 Connectors
I/O Connectors
Lightning Connectors
Memory Connectors
MIL-Spec / MIL-Type Connectors
Modular Connectors
Mezzanine Connectors
Photo-voltaic Connectors
Pin & Socket Connectors
Power Connectors
RJ45 Connectors
Solar Connectors
USB Connectors
Industrial semiconductors
Industrial Integrated Circuits
Industrial Capacitors
Industrial Connectors
Industrial Controllers
Industrial Counters
Industrial Relays
Industrial Solenoids
Industrial Sensors
Industrial Switches
Industrial Terminal Blocks
Industrial Timers
Industrial microprocessors
Industrial obsolete Parts
Industrial Components
Industrial Electronics
Backlighting Components
Electronic Visual Displays
Electronic Drivers
Fiber Optics
LED Emitters
LED Indication
LED Lighting
Optical Detectors and Sensors
Optical Switches
Optocouplers
Photocouplers
Flash memory
FPGA - Configuration Memory
FPGA - Field Programmable Gate Array
Managed NAND
Memory Controllers
Obsolete DRAM Memory
Memory IC Development Tools
Memory Cards
NVRAMs
NAND Flash
NOR Flash
Obsolete SRAM Memory
Simm
SO Dimm
Dimm
Transflash memory module
Memory Modules
Audio Transformers
Signal Transformers
Capacitors
EMI Filters
EMI Suppression
Encoders
Ferrites
Filters
Timing Devices
Potentiometers
Trimmers
Rheostats
Resistors
Thermistors/NTC
Thermistors/PTC
Varistors
Audio Sensors
Current Sensors
Environmental Sensors
Flow Sensors
Magnetic Sensors
Motion & Position Sensors
Optical Sensors
Pressure Sensors
Proximity Sensors
Temperature Sensors
MIL-STD-883
Mil Spec Resistors
Mil Spec Capacitors
Mil Spec Semiconductors
Mil Spec Integrated Circuits
Mil Spec Ics
Mil Spec Connectors
M39006 Series
M83733 Series
SNJ55 Series
SNJ54 Series
5962 Series
54F Series
MS3349 Series
5945-00 Series
MS310 Series
JAN/JANTX Series
JANTXV Series
JM38510 Series
285 notes · View notes
unitedloading766 · 3 years ago
Text
Initio Inic 3609 Windows 10
INIC-1610
The Initio INIC-1610 provides an advanced solution to connect SATA devices to USB or SATA Host with integrated CPU and embedded SRAM. To provide high performance and cost effective solution, the INIC-1610 integrates USB-PHY Mass Storage Class Bulk-Only USB function, SATA link/PHY core and microprocessor into a single ASIC. The INIC-1610 provides the data transfer rate of up to 60 MB/sec connecting to a 1.5G SATA interface.
Features Summary | FW/SW Support | Device Support
Features Summary
Integrates USB2.0 PHY IP core.
Data transfer rate of up to 60 MB/sec on USB side, 150 MB/sec on SATA side.
Integrated internal Turbo 8051 uP with 16KB embedded SRAM.
Program Flash In-Line (Firmware download mechanism, USB direct for MFG Test, write .bta file.
Local Bus Interface to Serial Peripheral Interface (SPI) Flash Only.
Support HID.
Up to 9 GPIO pins.
Use a single crystal for both USB and SATA.
Provide software utilities for downloading the upgraded firmware code under USB.
Supports SATA (bridged SATA) Hard Disk drives, CD-RW devices, DVDs, Removable media devices, BD (Blu-Ray Disc) drive
USB 1.1 and USB 2.0 compliant.
USB Mass Storage Class Bulk-Only Transport Specification Compliant.
Serial ATA Revision 2.5 specification Compliant (Hot Plug is supported).
Support SATA to SATA pass through.
Supports SATA NCQ.
Supports 3Gbps SATA host and 3Gbps SATA HDD.
Support ATA/ATAPI device DMA and PIO mode.
4k bytes of data buffer for data transfer.
On-Chip 3.3V to 1.8V regulator.
64 pin LQFP
Firmware/Software Support
USB Mass Storage Class Bulk-Only Transport support
Provide software utilities for downloading the upgraded firmware code
Device Support
Hard disk drives
CD-RW devices
DVDs
Removable media devices
Blu-Ray Disk driver
INIC-1610 Datasheet
Inic-3609
Initio Inic 3609 Windows 10
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz, Intel64 Family 6 Model 58 Stepping 9 Processor Count: 4 RAM: 8122 Mb Graphics Card: NVIDIA GeForce GT 620, 1024 Mb Hard.
Initio Inic 3609 Usb Device Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP It appears in Device manager as Initio Combo Device Class Moreover more and more IT managers and PC technicians reported that by using this software on a daily basis they are able to slash their working time and be much more productive.
Below you can download initio inic-3609 driver for Windows. File name: initioinic-3609.exe Version: 1.1.5 File size: 5.191 MB Upload source: manufactuter website Antivirus software passed: Norton Download Driver (click above to download).
Inic-3609
Tumblr media
Initio Inic 3609 Windows 10
Initio Corporation, a leading supplier of storage and high speed serial interface ASICs, has introduced INIC-3610, the first USB 3.0 to two ports SATA 6Gbps SOC solution in the world.
1 note · View note
flatairasd-blog · 5 years ago
Text
Completely independently developed display controller
Brief introduction of PCM-3499 motherboard PCM-3499 is an embedded control module with extremely high cost performance, size and compactness. Almost all the functions required by industrial computers are realized on the PC104 specification board. PCM-3499 onboard embedded high-performance 16-bit processor, which is internally 32-bit RISC architecture and compatible with 80C186 processor, has extremely high performance, main frequency up to 100MHz, built-in 100M Ethernet, and supports 1MB of SDRAM. The instructions are compatible with other X86 microprocessors.
Onboard functions include 10 / 100M high-speed Ethernet interface, PC104 interface, TFT interface and LVDS interface, VGA interface, support standard IDE interface (DOM, ordinary hard disk), parallel port, four serial ports (RS-232 and RS-485, four Each serial port can be configured as TTL level interface), USB interface, DOC interface, PS / 2 keyboard port, RTC real-time clock, ferroelectric, battery-backed SRAM non-volatile memory, watchdog, buzzer interface, general purpose GPIO, 8/16 bit compatible ISA bus, etc. Integrates the system BIOS, 1.44M flash disk
(Flash Flopy Disk-FFD, which can be expanded to 8M flash memory according to user needs) and a 16-point matrix Chinese character library on a single flash memory chip to achieve the smallest size with a minimum number of chips The most functions of the module. Completely independently developed display controller, can achieve up to 1024 768 true color high-performance display effect. If you need more other functions, you can expand the relevant function modules through the PC / 104 bus. Second, PCM-3499 textile controller solution system architecture
In the case of the loom reed suppliers controller successfully developed by Lanyu Technology customers, we briefly introduce one of the customers' textile controller system solutions based on Lanyu Technology PCM-3499. The system architecture is shown in Figure: According to the control realization principle of the entire system scheme shown in the above figure, we divide the main control unit of this scheme into upper and lower computer structures, and PCM-3499 completes the coordination with the upper computer and the control of the terminal equipment . The host computer is mainly responsible for human-computer interaction,
1 note · View note
techav · 5 years ago
Text
68030 Success
I gave up on the 6551 UART. I had no problems with the Motorola 6850 UART in my 68000 build, so I thought I'd give it a try.
The 6850 isn't quite as fully-featured as the 6551, but it's simple to interface and easy to use. In fact, because of the relationship between the 6800 and 6502 microprocessors, I didn't have to modify my logic to support the new UART. The timing, chip select, bus, are all virtually identical.
There is one important difference between the 6551 and the 6850 though. The 6850 does not have an internal baud rate generator like the 6551. It has options for an external BRG, or divide an incoming clock by 16 or 64. This means that the clock wired to the 6850 must be one of those multiples of a common baud rate.
The 6551 datasheet recommends a 1.8432MHz crystal for its baud rate generator. This frequency can be divided cleanly into the most common baud rates. Wired to the 6850, it would give the rates 115200 and 28800 as the two available options. While 28800 isn't terribly common, 115200 is the most common upper limit for modern serial devices.
My dumb terminal is not a modern serial device. It tops out at 38400 and does not support either of those options.
There are several crystal frequencies that are even multiples of all the common baud rates: 3.6864MHz, 4.332MHz, 6.144MHz, even 49.7664MHz.
That last one caught my eye while looking at available can oscillators at the local surplus shop. It's close enough to 50MHz to divide by 2 to run my 68030 CPU nearest its 25MHz limit, but divided by 81 it becomes 614.4kHz, which would divide in the 6850 to 38400 and 9600 — the highest supported rate of my terminal, and the most common rate.
I really wanted to be able to use the one crystal to run the CPU, all its logic, and the UART; and I really wanted to stick to just the one CPLD without additional logic. But, I've run into the limits of my CPLD. I don't have any I/O pins available to add the UART clock, and I don't have enough of the 64 macrocels available to add the divider.
Tumblr media
So I pulled out the same design I used on my 68000 build: a 6.144MHz oscillator divided by 10 using a 74'192 decade counter. And there was really only one place on the board where I could put the new logic chip — under the UART.
This is convenient. My 68030 build is using the same UART at the same frequency as my 68000 build. This means I only need to update a few address to be able to run code from the older build on the new one.
Tumblr media Tumblr media
This is what I've been waiting for. This Mandelbrot BASIC program takes ten minutes to run on my 68000. On the 68030, running BASIC from ROM it takes just over three minutes.
I can do better than that though. I've got a 120ns ROM on an 8-bit bus, but 70ns RAM on a full 32-bit bus. If I run BASIC from RAM instead, the Mandelbrot program only takes 55 seconds!
I can still do better. I'm still running the system at half speed, using a 25MHz oscillator, running the CPU at its minimum 12.5MHz. I need to get a 50MHz oscillator working, which will speed up both the CPU and the glue logic timing. I also got some new 512kBx8 SRAMs that are rated for 55ns that I should be able to run with no wait states at 25MHz. And my 6850 is the 68B50 variant, which can run at 2MHz, so I can also speed up the UART access logic, which was built for the 1MHz 6551. I'm even thinking of adding a second board with the 68882 FPU to help with math functions. This little thing should run quite fast.
17 notes · View notes
demoani · 2 years ago
Text
Intel g33 g31 express chipset family upgrade fo hp intel(r) g33/g31
Tumblr media
Regarding updates for this driver, their website says users may be unable to use the native resolution of some displays when using intel chipset graphics. Description type os version date, meaning it. Intel graphics card driver version 15.Īlthough a plethora of drivers exist for a large variety of devices. Although i'm not using a dell, i have an intel g31 based asus p244. If you ll experience problem is, their website didn't work. Installation can use two stages which are driver installation and device configuration. Linux* graphics is an ongoing field of interest at intel s open source technology center otc. I installed linux mint 17.3 and everything was fine.Įdit your original post and add solved once your question is resolved. Intel g33/g31 express when hit correct resolution. Intel R G33/G31 Express Chipset Family Driver to Download.Ĭurrently viewing lq as the g31/33 chipset. The diversity in anything outside man as some poor video graphics. The diversity in intel s chipset portfolio can be difficult to understand, as some features overlap from one model to the next. First off, yeah, i don't know why that message is there. One was an upgrade from win7, the other was a clean install though the computer previously ran win7. Here are the ways to install intel graphics card driver. The Open Source Technology Center at Intel hosts PowerTOP and LatencyTOP, and supports other open-source projects such as Wayland, Mesa3D, Threading Building Blocks (TBB), and Xen.Express chipest family, meaning it. During this period, Intel became the dominant supplier of microprocessors for PCs and was known for aggressive and anti-competitive tactics in defense of its market position, particularly against Advanced Micro Devices (AMD), as well as a struggle with Microsoft for control over the direction of the PC industry. Although Intel created the world's first commercial microprocessor chip in 1971, it was not until the success of the personal computer (PC) that this became its primary business.ĭuring the 1990s, Intel invested heavily in new microprocessor designs fostering the rapid growth of the computer industry. Intel was an early developer of SRAM and DRAM memory chips, which represented the majority of its business until 1981. The fact that "intel" is the term for intelligence information also made the name appropriate. The company's name was conceived as portmanteau of the words integrated and electronics, with co-founder Noyce having been a key inventor of the integrated circuit (the microchip). Intel Corporation was founded on Jby semiconductor pioneers Robert Noyce and Gordon Moore (of Moore's law), and is associated with the executive leadership and vision of Andrew Grove. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing. Intel supplies microprocessors for computer system manufacturers such as Apple, Lenovo, HP, and Dell. 46 in the 2018 Fortune 500 list of the largest United States corporations by total revenue. It is the world's largest and highest-valued semiconductor chip manufacturer on the basis of revenue, and is the developer of the x86 series of microprocessors, the processors found in most personal computers (PCs). Intel Corporation is an American multinational corporation and technology company headquartered in Santa Clara, California, in Silicon Valley.
Tumblr media
1 note · View note
bananasim · 2 years ago
Text
Intel 5300 agn driver windows 10
Tumblr media
INTEL 5300 AGN DRIVER WINDOWS 10 SOFTWARE
INTEL 5300 AGN DRIVER WINDOWS 10 PC
INTEL 5300 AGN DRIVER WINDOWS 10 SERIES
There are no solutions offered in HP Web assistance or via INTEL or MICROSOFT. My current WIFI Wireless/Bluetooth card is an INTEL WIFI LINK 5100 agn. UPGRADED TO WIN 10 64bit from WIN 7 64bit Источник after win 10 upgrade, intel wifi link 5100 no longer supported Please support our project by allowing our site to show ads.
INTEL 5300 AGN DRIVER WINDOWS 10 SOFTWARE
The ads help us provide this software and web site to you for free. The Open Source Technology Center at Intel hosts PowerTOP and LatencyTOP, and supports other open-source projects such as Wayland, Mesa3D, Threading Building Blocks (TBB), and Xen.Īdvertising seems to be blocked by your browser.
INTEL 5300 AGN DRIVER WINDOWS 10 PC
During this period, Intel became the dominant supplier of microprocessors for PCs and was known for aggressive and anti-competitive tactics in defense of its market position, particularly against Advanced Micro Devices (AMD), as well as a struggle with Microsoft for control over the direction of the PC industry. During the 1990s, Intel invested heavily in new microprocessor designs fostering the rapid growth of the computer industry. Although Intel created the world’s first commercial microprocessor chip in 1971, it was not until the success of the personal computer (PC) that this became its primary business. Intel was an early developer of SRAM and DRAM memory chips, which represented the majority of its business until 1981. The fact that «intel» is the term for intelligence information also made the name appropriate. The company’s name was conceived as portmanteau of the words integrated and electronics, with co-founder Noyce having been a key inventor of the integrated circuit (the microchip). Intel Corporation was founded on Jby semiconductor pioneers Robert Noyce and Gordon Moore (of Moore’s law), and is associated with the executive leadership and vision of Andrew Grove. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing. Intel supplies microprocessors for computer system manufacturers such as Apple, Lenovo, HP, and Dell. 46 in the 2018 Fortune 500 list of the largest United States corporations by total revenue.
INTEL 5300 AGN DRIVER WINDOWS 10 SERIES
It is the world’s largest and highest-valued semiconductor chip manufacturer on the basis of revenue, and is the developer of the x86 series of microprocessors, the processors found in most personal computers (PCs). Intel Corporation is an American multinational corporation and technology company headquartered in Santa Clara, California, in Silicon Valley. Gordon Moormar Ishraob Swajay Bhatt(Chief Client Platform Architect) Description extracted from Wikipedia: Name
Tumblr media
0 notes
indutryanalysis · 3 years ago
Text
Static Random Access Memory Market Size, Research Report – Global Forecast to 2030
Global SRAM Market Scope
The global Static Random-Access Memory (SRAM) Market was valued at USD 389.3 million in 2018 and is expected to reach USD 527 million by 2025. It can display a CAGR of 4.45% during the forecast period.
Competitive Outlook
Lyontek Inc., Integrated Device Technology, Inc., ON Semiconductor, Integrated Silicon Solution Inc., Microchip Technology Inc., SemiLEDS Corporation, Cypress Semiconductor, Jeju Semiconductor, Renesas Electronics Corporation, Chiplus Semiconductor Corp., and others are key players of the global static random-access memory (S-RAM) market.
Get Free Sample Copy at: https://www.marketresearchfuture.com/sample_request/8390
Static random-access memory (S-RAM or SRAM) is a semiconductor memory component capable of retaining data as long as power is being supplied. It is used in small memory banks, caches, and registers. The large number of computing, microprocessor, and consumer electronic applications can drive its need exponentially. The global static random-access memory market report by Market Research Future (MRFR) provides a detailed view of the industry replete with growth enablers and challenges for estimating revenue and growth trajectories for the period of 2019 to 2025 (forecast period). The COVID-19 pandemic and its impact are analyzed at a granular level for providing an unbiased view.
Segmentation
The global static random-access memory (SRAM) market has been segmented on the basis of type, memory size, and application.
By type, the global static random-access memory (SRAM) market has been segmented into serial SRAM, synchronous SRAM, laser asynchronous SRAM, pseudo SRAM, and others.
By memory size, the global static random-access memory (SRAM) market has been segmented into 8 KB–256 KB, 256KB–2 MB, and above 2 MB.
Based on application, the global static random-access memory (SRAM) market has been segmented into IT & telecommunication, automotive, consumer electronics, industrial, aerospace & defense, and others.
Regional Analysis
By region, the global static random-access memory (SRAM) market has been segmented into North America, Europe, Asia Pacific (APAC), the Middle East & Africa (MEA), and Central & South America.
The APAC region is estimated to dominate the global static random-access memory (SRAM) market followed by North America. The wide consumer electronics customer base in China and the presence of major global foundries in APAC has led to the faster development of non-volatile memory technologies and has permitted the easy availability of products in the market. The launch of next-generation technologies and 3D packaging can induce the need for SRAM on chips. Furthermore, technological initiatives and investments by governments in the form of IT parks to promote the development of dynamic memory modules is further boosting the growth of the regional market.
On the other side, North America is expected to witness the fastest growth due to the increasing deployment of data centers in the region. According to the Washington State Department of Commerce, the US data center market is witnessing growth due to large storage options by consumers and enterprises. North Virginia has the largest data center market in the US. The focus on online gaming and sales of latest multi-player games can be fruitful for the global SRAM market in the region.
Get Complete Report Details at: https://www.marketresearchfuture.com/reports/static-random-access-memory-market-8390
About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Services.
MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by products, services, technologies, applications, end users, and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.
Contact:        
Market Research Future (Part of Wantstats Research and Media Private Limited)
99 Hudson Street, 5Th Floor
New York, NY 10013
United States of America
+1 628 258 0071 (US)
+44 2035 002 764 (UK)
Email: [email protected]  
Website: https://www.marketresearchfuture.com
0 notes
precisionlogictech · 3 years ago
Link
Electronic Products Distributor
ELECTRONIC PRODUCTS DISTRIBUTOR - PRECISION LOGIC
Find obsolete, discontinued, EOL, Last time Buys, Hard to find, and long lead time electronic products in stock/available. Immediate Price and Delivery.
CALL US 516-826-6200
TYPES OF ELECTRONIC PRODUCTS
Audio ICs
Amplifier ICs
Chipsets
Clock & Timer ICs
Communication ICs
Networking ICs
Counter ICs
Data Converter ICs
Digital Potentiometer ICs
Driver ICs
Interface ICs
Integrated Circuits
Logic ICs
Microprocessors
Microcontrollers
Multimedia ICs
Power Management ICs
Programmable Logic ICs
Switch ICs
Semiconductors
Wireless ICs
RF Integrated Circuits
Memory ICs
Audio & Video Connectors
Automotive Connectors
Backplane Connectors
Board to Board Connectors
Card Edge Connectors
Circular Connectors
Connectors Obsolete
D-Sub Connectors
Ethernet Connectors
FFC/FPC Connectors
Fiber Optic Connectors
IEEE 1394 Connectors
I/O Connectors
Lightning Connectors
Memory Connectors
MIL-Spec / MIL-Type Connectors
Modular Connectors
Mezzanine Connectors
Photo-voltaic Connectors
Pin & Socket Connectors
Power Connectors
RJ45 Connectors
Solar Connectors
USB Connectors
Industrial semiconductors
Industrial Integrated Circuits
Industrial Capacitors
Industrial Connectors
Industrial Controllers
Industrial Counters
Industrial Relays
Industrial Solenoids
Industrial Sensors
Industrial Switches
Industrial Terminal Blocks
Industrial Timers
Industrial microprocessors
Industrial obsolete Parts
Industrial Components
Industrial Electronics
Backlighting Components
Electronic Visual Displays
Electronic Drivers
Fiber Optics
LED Emitters
LED Indication
LED Lighting
Optical Detectors and Sensors
Optical Switches
Optocouplers
Photocouplers
Flash memory
FPGA - Configuration Memory
FPGA - Field Programmable Gate Array
Managed NAND
Memory Controllers
Obsolete DRAM Memory
Memory IC Development Tools
Memory Cards
NVRAMs
NAND Flash
NOR Flash
Obsolete SRAM Memory
Simm
SO Dimm
Dimm
Transflash memory module
Memory Modules
Audio Transformers
Signal Transformers
Capacitors
EMI Filters
EMI Suppression
Encoders
Ferrites
Filters
Timing Devices
Potentiometers
Trimmers
Rheostats
Resistors
Thermistors/NTC
Thermistors/PTC
Varistors
Audio Sensors
Current Sensors
Environmental Sensors
Flow Sensors
Magnetic Sensors
Motion & Position Sensors
Optical Sensors
Pressure Sensors
Proximity Sensors
Temperature Sensors
MIL-STD-883
Mil Spec Resistors
Mil Spec Capacitors
Mil Spec Semiconductors
Mil Spec Integrated Circuits
Mil Spec Ics
Mil Spec Connectors
M39006 Series
M83733 Series
SNJ55 Series
SNJ54 Series
5962 Series
54F Series
MS3349 Series
5945-00 Series
MS310 Series
JAN/JANTX Series
JANTXV Series
JM38510 Series
102 notes · View notes
techsciresearch · 3 years ago
Text
Networking & Communication Segment to Dominate the India Semiconductor Market through FY2027F – TechSci Research
Roll-out of 5G technology and development of consumer electronics industry is expected to drive the demand for India Semiconductor market in the forecast period.
According to TechSci Research report, “India Semiconductor Market By Components (Microprocessors, Sensors, Analog IC, Memory Devices, Optoelectronics, Discrete Power Devices & Others), By Application (Networking & Communication, Healthcare, Automotive, Consumer Electronics, Industrial, Smart Grid, Gaming & Others), By Type (Intrinsic Semiconductor & Extrinsic Semiconductor), By Process (Wafer Production, Wafer Fabrication, Doping, Masking, Etching & Thermal Oxidation), By Region, Competition Forecast & Opportunities, FY2027”, the India Semiconductor market is expected to witness steady growth in the forecast period, FY2023-FY2027F. To boost the growth of the electronics industry, leading authorities are supporting the set-up of semiconductor wafer fabrication plants which in turn is expected to spur the semiconductor market growth. A semiconductor wafer fabrication plant is a factory where devices such as integrated circuits and discrete electronic devices including transistors and diodes are manufactured. The growth of the electronics industry and the huge demand for data center facilities for storing information generated through various sources is influencing the growth of the semiconductor market in India. The schemes promoting the development of smart cities which use emerging technologies to provide an enhanced experience to consumers by providing insights by constant monitoring and analysis are expected to pave the way for the semiconductor market growth. The growing demand from the automotive industry due to the use of automation technology in automobiles to increase comfort, ease, and provide security to customers is expected to fuel the market growth. Automotive market players are integrating semiconductors in their vehicles to provide the required insights related to vehicle such as navigation control, infotainment systems, and collision detection systems. The growing digital transformation in the country to increase transparency and speed up the process in all important industry verticals is expected to increase the demand for the semiconductor market in the next five years.
The COVID-19 outbreak across the world, which has been declared as a pandemic by the World Health Organization has affected several countries adversely including India. Leading authorities of India imposed lockdown restrictions and released a set of precautionary measures to contain the spread of novel coronavirus. Manufacturing units were temporarily shut down and the workers moved back to their native places which led to the shortage of workforce at the manufacturing units. The disruption in the supply chain was observed in this period owing to the restrictions imposed on the import and export activities. Thereby, COVID-19 negatively impacted the growth of the semiconductor market in India during this period.
Tumblr media
Browse XX Figures spread through XX Pages and an in-depth TOC on “India Semiconductor Market”.
https://www.techsciresearch.com/report/india-semiconductor-market/7801.html
India Semiconductor market is segmented into components, application, type, process, regional distribution, and company. Based on the components, the market can be divided into microprocessors, sensors, analog IC, memory devices, optoelectronics, discrete power devices & others. The memory devices segment is expected to account for a major market share in the forecast period. High demand from end-user industries and the ongoing advancements in technology such as cloud computing and virtual reality is expected to influence the market growth. The high cost of NAND flash chips and DRAM is further expected to fuel the market growth.
Broadcom India Pvt. Ltd., Chiplogic India Pvt. Ltd., Tata Elxsi, Continental Device India Ltd, MosChip Technologies Limited, NXP Semiconductors, Semiconductor Laboratory, eInfoChips, Inc., Saankhya Labs, Semiconductor Solutions, ASM Technologies, ST Microelectronics India, Infineon Technologies India Pvt. Ltd, Masamb Electronics Systems are the leading players operating in India semiconductor market. Manufacturers are increasingly focusing on research and development process to fuel higher growth in the market. To meet evolving customer demand with respect to better efficiency and durability, several semiconductor manufacturers are coming up with their technologically advanced offerings.
Download Sample Report  @ https://www.techsciresearch.com/sample-report.aspx?cid=7801 Customers can also request for 10% free customization on this report.
“The market players are making huge investments for the miniaturization of the semiconductor chips with increased processing speed, and which can process large data in less amount of time. Growing adoption of advanced technologies such as artificial intelligence, the internet of things, machine learning in the next generation of interconnected devices by the market players to enhance the consumer experience and increase the demand for intelligence computing is expected to create lucrative opportunities for the India semiconductor market growth in the forecast period.”, said Mr. Karan Chechi, Research Director with TechSci Research, a research-based global management consulting firm.
“India Semiconductor Market By Components (Microprocessors, Sensors, Analog IC, Memory Devices, Optoelectronics, Discrete Power Devices & Others), By Application (Networking & Communication, Healthcare, Automotive, Consumer Electronics, Industrial, Smart Grid, Gaming & Others), By Type (Intrinsic Semiconductor & Extrinsic Semiconductor), By Process (Wafer Production, Wafer Fabrication, Doping, Masking, Etching & Thermal Oxidation), By Region, Competition Forecast & Opportunities, FY2027” has evaluated the future growth potential of India Semiconductor market and provided statistics & information on market size, shares, structure and future market growth. The report intends to provide cutting-edge market intelligence and help decision makers take sound investment decisions. Besides, the report also identifies and analyzes the emerging trends along with essential drivers, challenges, and opportunities in the India semiconductor market.
Browse Related Reports
Global Semiconductor Memory Market By Type (Volatile and Non-Volatile), By Volatile Type (DRAM, SRAM, SDRAM and MRAM), By Non-Volatile Type (PROM, EPROM, EEPROM and Flash Memory), By Application (Consumer Electronics, IT & Telecommunications, Automotive, Medical Devices, Aerospace & Defence and Others), By Region, Competition, Forecast & Opportunities, 2016-2026
https://www.techsciresearch.com/report/semiconductor-memory-market/7328.html
 Global 5G Infrastructure Market, By Communication Infrastructure (Small Cell, Macro Cell, Radio Access Network (RAN) and Distributed Antenna System (DAS)), By Core Network Technology (Software-Defined Networking (SDN), Network Function Virtualization (NFV), Mobile Edge Computing (MEC) and Fog Computing (FC)), By Application (Healthcare, Automotive, and Others), By Company and By Geography, Forecast & Opportunities, 2025
https://www.techsciresearch.com/report/global-5g-infrastructure-market/2987.html
Contact
Mr. Ken Mathews
708 Third Avenue,
Manhattan, NY,
New York – 10017
Tel: +1-646-360-1656
0 notes
shunlongwei · 3 years ago
Photo
Tumblr media
Intel Https://www.slw-ele.com; Email: [email protected]
intel
Tumblr media
https://en.wikipedia.org/wiki/Intel
Intel Corporation (commonly known as Intel and stylized as intel) is an American multinational corporation and technology company headquartered in Santa Clara, California, in the Silicon Valley. It is the world's second largest and second highest valued semiconductor chip manufacturer based on revenue after being overtaken by Samsung, and is the inventor of the x86 series of microprocessors, the processors found in most personal computers (PCs). Intel ranked No. 46 in the 2018 Fortune 500 list of the largest United States corporations by total revenue.
  Intel supplies processors for computer system manufacturers such as Apple, Lenovo, HP, and Dell. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing.
  Intel Corporation was founded on July 18, 1968, by semiconductor pioneers Robert Noyce and Gordon Moore (of Moore's law), and widely associated with the executive leadership and vision of Andrew Grove. The company's name was conceived as portmanteau of the words integrated and electronics, with co-founder Noyce having been a key inventor of the Integrated Circuit (Microchip). The fact that "intel" is the term for intelligence information also made the name appropriate.Intel was an early developer of SRAM and DRAM memory chips, which represented the majority of its business until 1981. Although Intel created the world's first commercial microprocessor chip in 1971, it was not until the success of the personal computer (PC) that this became its primary business.
  During the 1990s, Intel invested heavily in new microprocessor designs fostering the rapid growth of the computer industry. During this period Intel became the dominant supplier of microprocessors for PCs and was known for aggressive and anti-competitive tactics in defense of its market position, particularly against Advanced Micro Devices (AMD), as well as a struggle with Microsoft for control over the direction of the PC industry.
  The Open Source Technology Center at Intel hosts PowerTOP and LatencyTOP, and supports other open-source projects such as Wayland, Mesa3D, Intel Array Building Blocks, and Threading Building Blocks (TBB), and Xen. History
Intel was founded in Mountain View, California, in 1968 by Gordon E. Moore (of "Moore's law" fame), a chemist, and Robert Noyce, a physicist and co-inventor of the integrated circuit. Arthur Rock (investor and venture capitalist) helped them find investors, while Max Palevsky was on the board from an early stage. Moore and Noyce had left Fairchild Semiconductor to found Intel. Rock was not an employee, but he was an investor and was chairman of the board. The total initial investment in Intel was $2.5 million convertible debentures and $10,000 from Rock. Just 2 years later, Intel became a public company via an initial public offering (IPO), raising $6.8 million ($23.50 per share). Intel's third employee was Andy Grove, a chemical engineer, who later ran the company through much of the 1980s and the high-growth 1990s.
  In deciding on a name, Moore and Noyce quickly rejected "Moore Noyce", near homophone for "more noise" – an ill-suited name for an electronics company, since noise in electronics is usually undesirable and typically associated with bad interference. Instead, they founded the company as N M Electronics on July 18, 1968, but by the end of the month had changed the name to Intel which stood for Integrated Electronics. Since "Intel" was already trademarked by the hotel chain Intelco, they had to buy the rights for the name.
Pre:Powerex
Next:Intersil
0 notes