#Monel K500 Flanges Exporter

[mukeshmus]

Monel K500 Stud Bolts

Chhajed Steel and Alloys is one of the perceived wholesalers and suppliers of Monel K500 Stud Bolt, which are precipitation setting shocks produced using copper nickel amalgam with extension of titanium and aluminum. A momentous typical for Monel K500 Threaded Rods is that they offer remarkable insurance from hydrofluoric destructive, a particularly extreme destructive to oversee, in all concentrations up to the limit. Aluminum and copper in Monel K500 Threaded Rods may be explicitly oxidized in the midst of warming, leaving an alluring nickel-rich film ostensibly of the piece. Monel K500 Tie Rods are chiefly maker and supply at Alloy Fasteners. The bit of Monel K500 Tie Bars is perfect for application in sustenance getting ready industry. Monel K500 Double Ended Studs is comprehensively perceived for its high-strength, flexibility, dimensional exactness, disintegration insurance, etc.

The Alloy K500 Threaded Rods are fabricated to support high weight and thing guarantee. Established Alloy K500 Threaded Bars has been presented to since quite a while earlier kept warming at 800 Degree F. A further moderate creating happened amidst the fundamental month of introduction, at any rate kept warming caused no further gigantic change in properties. Amalgam K500 Tie Bars is reliably utilized as a bit of Chemical Process Industry, for example, for Processes including customary acids, rankling pop and dry chlorine. Mix K500 Tie Rods is additionally utilized as a bit of time of chlorinated plastics, and applications in like way solidify expert cutting edges and scrubbers. Purchase Alloy K500 Stud dash at sensible rates from us. We in like way offer the comparable in various and balanced sizes and shapes.

For More Information:

Call Us:  +919821513630

E-mail: info@chhajedsteel.com

[viren-123]

Monel K500 Blind Flanges Exporters

Monel Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types. A Blind flange is round plate which has all of the relevant boltholes but no center hole, and because of this feature this flange is used to close off the ends of a piping systems and pressure vessel openings. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened.

However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications.

Monel Blind Flanges are used for testing the flow of gas or liquid through a pipeline or vessel. It helps to close the end of piping systems or vessel openings. It allows easy access to the pipeline when there is a requirement to work done inside the line. They are used in high pressure applications available in all grades, materials, size and specifications. Blind pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for blind pipe flanges, the standard height is 1/16" for blind pipe flanges under 400 ( 2.4360)#. For blind pipe flanges of 400 ( 2.4360)# and up, the standard blind pipe flange raised face height is 1/4".

B16.5 ASTM A182 Blind Flange, Fusion Bonded Epoxy Coating, EN 1092-2 PN16 Blind Flange, ASME B16.5 Dual Monel Alloy Blind Flange, ANSI B16.5 Class 150 Flat Face Blind Flange, Monel Alloy Reducing Blind Flange Stockiest.

Standards Specification:

Size : 1/2" to 48"

Specifications : ASTM A182

Rating: 150#, 300#, 600 (2.4640)#, 900#, 1500#, 2500#,

Material & Grade :

Stainless Steel :Grade: 304 (1.4301), 304L (1.4307), 304H (1.4948), 309 (1.4828), 309S, 310, 310S (1.4845) , 316 ( 1.4401), 316H, 316L( 1.4404 /1.4432) , 317, 317L (1.4438), 321 (1.4541), 321 H(1.4878), 347 (1.4550), 347H (1.4961), 904L (1.4539) Duplex Steel:Grade: 2205 (1.4507) Super Duplex Steel:Grade: 2507 (UNS S32750) (1.4410) (UNS S32750) Inconel :Grade: Inconel 600 (2.4640), Inconel 601 (2.4851), Inconel 625 (2.4856), Inconel 718(2.4668) Incoloy :Grade: Incoloy 800 (2.4958), Incoloy 800H, Incoloy 800HT Nickel :Grade: Nickel 200, Nickel 201 Titanium :Grade: Gr.1 (3.7025) , Gr.2 (3.7035) , Gr.3:(3.7055) , Gr.5(3.7164/65), Gr. 7(3.7235) , Gr. 11 (3.7225) Hastalloy :Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X.

For More Information Visit Our Website - http://www.kobsindia.in/monel-blind-flange.html Contact Us -9819523999 Email Id - exports@kobsindia.in

[bullionpipestainlesssteel]

What industries use fasteners?

Fasteners play a critical role in construction, manufacturing, and engineering. As a leading force in the industry, Bullion Pipes & Tubes LLP stands out as the premier fasteners manufacturer, supplier, stockist, and exporter worldwide. With an extensive range that includes Bolts, Nuts, Screws, Washers, Studs, Rivets, Self-Clinching Fasteners, and more, our commitment is to provide top-notch solutions that cater to diverse project requirements.

This blog post aims to shed light on the diverse industries that heavily rely on fasteners, emphasizing the broad spectrum of applications our products cater to.

Types of Fasteners We Offer 

With us, we offer fasteners with a variety of Types and Features, including the following;

Bolts: These threaded fasteners require corresponding nuts for secure connections. Choose from an array of head styles, including hex head, socket head, and round head.

Nuts: Complementing bolts, nuts secure connections. Opt for hex nuts, lock nuts, or wing nuts based on specific application requirements.

Screws: Known for versatility, screws find use in diverse applications. Choose from different head styles like Phillips, flat, or hex, and opt for self-tapping or machine screws.

Washers: Flat and disk-shaped, washers play a pivotal role in distributing fastener loads and protecting surfaces. Types include flat, lock, and spring washers.

Studs: Characterized by threaded rods without heads on one end, studs are ideal for dual-threaded connections and situations where nuts are impractical.

Rivets: Permanent fasteners with a cylindrical shaft and deformed head create a secure connection.

Pins: Cylindrical fasteners for alignment, securing, or support, including types like dowel, cotter, and clevis pins.

Anchors: These fasteners affix objects to hard surfaces, such as concrete. Common types involve wedge, sleeve, and drop-in anchors.

Clips and Clamps: Secure items like hoses and cables using clips and clamps, such as hose clamps, spring clips, and wire rope clamps.

Threaded Rods: Lengthy straight rods with continuous threading, frequently used for hanging and providing support.

U-Bolts: Featuring a U-shaped design with threads on both ends, they secure round objects to surfaces.

Eye Bolts: Equipped with a loop or "eye," these bolts are designed for lifting and securing heavy loads.

Stud Bolts: Threaded at both ends with an unthreaded portion in the middle, commonly used in flange connections.

Self-Clinching Fasteners: Specifically designed for sheet metal and thin materials, including self-clinching nuts, studs, and standoffs.

Hinges and Latches: Serving as fasteners for attaching doors, gates, and panels, they include hinges, hasps, and latches.

Materials Wise Grade We Offer – Fasteners

At, Bullion Pipes & Tubes LLP, provides a wide variety of fasteners, including;

Copper – CDA 102, CDA 101, CDA 110

Titanium – Titanium Alloy Gr 2 & Titanium Alloy Gr 5 

Monel – Monel K500 & Monel 400 

Carbon Steel – ASTM A193/194 & ASME SA193/194 Carbon Steel 

Brass – Alloy 260, Alloy C48200 – C48500, Alloy 385, Alloy 360, Alloy 353, Alloy 330, Alloy 272, Alloy 464

Tantalum – RO5200， RO5400， RO5252(Ta2.5W)， RO5255(Ta10W)

Inconel – Inconel 718, Inconel 600, Inconel 601, Inconel 625 

Aluminum – he 20 65032 6061, he 30 64430, ASTM 6061, 6063, 6351

Nickel – Nickel Alloy 200/201 

SMO 254 – ASTM A 479 ASME SA 479

Duplex Steel – Duplex Steel UNS S32205, Duplex Steel UNS S31803 

Hastelloy – Hastelloy C22 & Hastelloy B2, Hastelloy C276 

Super Duplex Steel – Super Duplex Steel UNS S32750, Super Duplex Steel UNS S32760 

Incoloy – Incoloy 800/800H/800HT, Incoloy 825 

Alloy 20 – DIN 2.4460 Alloy Hexagonal Nut, Alloy 20 Bolts, UNS N08020 Alloy 20 Screws, Alloy 20 Washers

Industries Uses Fasteners

Here are some industries where fasteners are used extensively:

Construction: Fasteners such as bolts, nuts, screws, and anchors are widely used in the construction industry for connecting structural elements like beams, columns, and panels.

Automotive: The automotive industry relies heavily on fasteners for assembling vehicles. A variety of screws, bolts, nuts, and clips are used in the manufacturing of cars, trucks, motorcycles, and other vehicles.

Aerospace: Aerospace applications require precision and reliability. Fasteners play a critical role in assembling aircraft and spacecraft components, ensuring safety and structural integrity.

Manufacturing: In general manufacturing processes, fasteners are used to assemble a wide range of products across different industries, including appliances, electronics, and consumer goods.

Energy: Fasteners are used in the energy sector for assembling components in power plants, wind turbines, solar panels, and other energy infrastructure.

Shipbuilding: The shipbuilding industry relies on fasteners for assembling the various components of ships, including the hull, decks, and internal structures.

Railway: They are crucial in the railway industry for connecting rail tracks, assembling train components, and maintaining the structural integrity of railway infrastructure.

Oil and Gas: In the oil and gas industry, fasteners are used in the construction and maintenance of pipelines, platforms, and other infrastructure.

Electronics: Fasteners play a role in the assembly of electronic devices and equipment. They are used to secure components on circuit boards and in the housing of electronic products.

Medical Devices: Fasteners are used to ensure that components are held together in a precise manner in medical devices and equipment.

Furniture: In the furniture industry, fasteners such as screws, bolts, and nuts are used to assemble various types of furniture, from simple household items to complex office furniture.

Final Words! As a global Fasteners Supplier, Manufacturer Stockist, and Exporter, Bullion Pipes & Tubes LLP takes pride in contributing to the success of diverse industries. Our fasteners, available in an array of sizes, specifications, standards, grades, materials, and types, offer versatility and reliability. Whether it's bolts, nuts, screws, washers, studs, rivets, or self-clinching fasteners, our commitment to quality ensures that our customers can confidently choose the perfect solution for their project requirements. Contact us today at info@bullionpipe.com or sales@bullionpipe.com to explore how our fasteners can enhance the strength and durability of your applications.

[jaysteels]

Monel Fasteners: Strength and Durability in Industrial Construction

Fasteners are of paramount importance when it comes to industrial construction. These seemingly small components play a crucial role in holding structures together. Among the myriad choices available, Monel fasteners stand out for their exceptional strength and durability. Jay Steel Corporation, we take pride in being a leading  Monel fasteners manufacturer and supplier, offering unparalleled strength and durability for a wide range of industrial applications. Our commitment to quality extends to our diverse range of Monel alloy products, including Monel 400 Products and Monel K500 Products, available in various forms such as Monel Wire Mesh, Monel Round Bar, Monel  Strips Sheet & Plats, Monel Tube & Pipe, Monel Fittings, Monel Flanges, and welding rods so that our customers can choose the one that will perfectly suit their project requirements!

In this blog post, we will explore the remarkable qualities of Monel fasteners and why they are considered a preferred choice in industrial construction.

Understanding Monel:

Monel is a nickel-copper alloy known for its corrosion resistance, high strength, and durability. The alloy primarily consists of nickel (approximately 67-70%) and copper (about 28-34%), with small amounts of iron, manganese, carbon, and silicon. The unique combination of these elements results in a material with superior properties that make it ideal for challenging industrial environments.

Strength Beyond Compare:

Monel fasteners are renowned for their remarkable strength, making them a reliable choice for heavy-duty applications in industrial construction. The high nickel content in Monel contributes to its exceptional tensile strength and resistance to deformation under extreme loads. This characteristic ensures that structures secured with Monel fasteners maintain their integrity even in the face of intense pressure and stress.

Corrosion Resistance:

One of the primary challenges in industrial construction is the corrosive nature of various environments. Monel fasteners excel in this regard, as they exhibit outstanding resistance to corrosion, particularly in harsh conditions such as exposure to saltwater, acids, and alkalis. This corrosion resistance significantly extends the lifespan of structures and reduces maintenance costs over time.

Durability in Diverse Environments:

Monel fasteners are versatile and well-suited for use in diverse industrial environments. Whether in chemical processing plants, marine applications, or oil and gas facilities, Monel's durability remains unwavering. The alloy's resistance to pitting, crevice corrosion, and stress corrosion cracking further enhances its suitability for challenging construction scenarios.

Temperature Stability:

Industrial construction often involves exposure to extreme temperatures, and Monel fasteners are designed to withstand such conditions. The alloy maintains its strength and structural integrity across a wide temperature range, making it a reliable choice for projects that face temperature fluctuations, whether in cold or scorching heat.

Ease of Fabrication and Installation:

Despite its impressive strength, Monel is also known for its malleability, which makes it relatively easy to fabricate into various fastener shapes. This characteristic simplifies the manufacturing process and contributes to the ease of installation, saving both time and resources in construction projects.

Final Words!

With a strong focus on quality Monel fasteners and alloy products, Jay Steel Corporation emerges as a leader in industrial construction. With a comprehensive range of Monel offerings and a global presence, we continue to contribute to the success of diverse industrial projects. Recognizing the global demand for top-notch Monel alloy products, Jay Steel Corporation serves as a reliable exporter to various countries, including Thailand, Singapore, Malaysia, India, Germany, Russia, France, Nigeria, USA, Saudi Arabia, Kuwait, Qatar, Egypt, Turkey, Oman, Jordan, Bahrain, the United Kingdom, and Italy. Our commitment to quality and competitive pricing has established us as a trusted partner in international markets. Choose us for your Monel Alloys Solutions that go beyond expectations, ensuring the resilience and longevity of your constructions.

[citizenflanges-blog]

Monel K500 Flanges Properties and Applications

Citizen Metals is a well-known exporting and manufacturing unit of Monel Alloy K500Flanges, which is also known for its ease of fabrication compared to other super-alloys, and the fact that it is essentially nonmagnetic even at low temperatures. Monel K500 Slip OnFlanges is precipitation - hardenable nickel - a copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. A useful characteristic of Monel K500 Blind Flanges is that it is virtually nonmagnetic, even at quite low temperatures. Monel K500 Spectacle Blind Flanges has approximately three times the yield strength and double the tensile strength when compared with 400.

Monel K500 Flanges Application Industries

 Chemical Plants

 Fertilizers Plants

 Petrochemicals Industrial

 Textile Machineries

 Industrial Machineries

 Paper Industries

[tritonalloysinc]

Triton offers ASME/ANSI B16.5 ASTM A182 Stainless Steel 904L Weld Neck Flanges of high quality available in various material such as Hastelloy C22, Monel 400, K500, Inconel 600, 625, Incoloy 800.

[ozairtradelink]

[inconel718-blog]

Monel Suppliers, Monel Price, Monel Material, Nickel-Copper Alloy

Monel Suppliers, Monel Price, Monel Material, Nickel-Copper Alloy, Monel Price per kg in India, Welding Monel Manufacturer, Exporter .

Monel

Most of the companies which belong to marine, oil, and chemical processing industries use a great deal of Monel in their machinery products. Monel is a nickel alloy, prized for its strength and ability to resist corrosion. Its applications include crude gasoline, petroleum stills and marine fixtures, freshwater tanks, fasteners, and chemical processing equipment. At M.B.Metal India clients can order Monel in several forms, including Monel-400 and Monel-K500.

As resistant to corrosive forces as nickel but less expensive and easier to work with, Monel is widely used in situations where seawater, petroleum, or de-aerated acids come into contact with machinery. When a piece of equipment needs to stand up to exterior or interior corrosives, Monel is the fail-safe solution. It also has higher maximum working temperatures than nickel, making it the preferred metal for boiler feedwater heaters and other heat exchangers.

We supplies Monel-400 and Monel-K500 in the form of plate, sheet, strip, bar, wire, pipe, tubing, pipe fittings and flanges.

Monel 400 :

Monel-400 is a nickel-copper alloy (about 23% Cu–67% Ni ) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good weldability, good corrosion resistance and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrofluoric and hydrochloric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems

We supplies monel-400 in the form of monel-400 plate, monel-400 sheet, monel-400 strip, monel-400 bar, monel-400 wire, monel-400 pipe, monel-400 tubing, monel-400 pipe fittings and monel-400 flanges.

Monel K500:

Monel-K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel-400 with the added advantage of hardness and greater strength. These amplified properties, strength and hardness, are obtained by adding titanium and aluminum to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel-K500 has a greater tendency toward stress-corrosion cracking in some environments than Monel-400. Monel-K500 has approximately three times the yield strength and double the tensile strength when compared with Monel-400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

The corrosion resistance of monel-K500 is substantially equivalent to that of alloy 400 except that when in the age-hardened condition, nickel monel-K500 has a greater tendency toward stress-corrosion cracking in some environments. Monel-K500 has been found to be resistant to a sour-gas environment. The combination of very low corrosion rates in high-velocity sear water and high strength make monel-K500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.

We supplies Monel-K500 in the form of monel-K500 plate, monel-K500 sheet, monel-K500 strip, monel-K500 bar, monel-K500 wire, monel-K500 pipe, monel-K500 tubing,monel-K500 pipe fittings and monel-K500 flanges.

[siddhagirismt]

Alloy K500 Monel Supplier Manufacturer Exporter Stockist

Alloy K500 Monel Supplier Manufacturer Exporter Stockist

Alloy K500 Monel supplied by Siddhagiri Metals and Tubes is a high quality Monel K500 Alloyin forms like K500 Monel Pipe, K500 Monel Tube, K500 Monel Flanges, K500 Monel Fasteners, K500 Monel Fittings, K500 Monel Pipe Fittings, K500 Monel Tube Fittings, K500 Monel Buttweld Fittings, K500 Monel Compression Fittings, K500 Monel Forged Fittings, K500 Monel Forgings, K500 Monel Round Bar, K500 Monel…

[siddwalker-blog]

Monel K500 Plates

Monel K500 Plates Supplier Siddhagiri Metals and Tubes, is a Renowned and Leading Manufacturer and Supplier of Monel K500 Plates. Siddhagiri Metals and Tubes exports Monel K500 Plates in various forms like pipes, tubes, fasteners, Pipe, tube fittings, Pipe fittings,flanges, wire mesh, Pipe, tubes, sheet plate, forged fittings, etc. Monel K500 Plates Supplied by Siddhagiri Metals and Tubes is exported to various countries such as the United States, Europe, Russia, Turkey, Malaysia, the UAE, Saudi Arabia, Iran, Brazil, Chile, Mexico, South Africa, Jordan, Tunisia, Vietnam, Indonesia, Thailand, Singapore, Colombia, and Sri Lanka. Monel K500 Plates of High Quality is manufactured and supplied by Siddhagiri Metals and Tubes at best rate and fast delivery. Siddhagiri Metals and Tubes is an ISO Certified and PED Approved and CRISIL MSE 4 Rated Global Supplier, manufacturer and exporter of Monel K500 Plates in various forms and sizes. Siddhagiri Metals and Tubes supplies Monel K500 Plates in more than 70 countries Worldwide. Please note we also offer Indian, European and Japan origin. Email us your requirements at export@siddhagirimetals.com or Contact us at +91-22-6610-9206.

[bullionpipestainlesssteel]

All you need to know about Butt Weld Fittings

Butt weld fittings are essential components used in various industries to join and connect pipes or tubes seamlessly. These fittings play a crucial role in creating a robust and leak-free piping system. As a leading butt weld fittings manufacturer and supplier, stockist, and exporter in India. Bullion Pipes & Tubes LLP offers an extensive range to suit various project needs. Our fittings are available in different sizes, specifications, material grades, and types, ensuring you find the perfect fit for your specific application.

In this comprehensive guide, we will delve into all you need to know about butt weld fittings and how they cater to the needs of different applications.

What Are Butt Weld Fittings?

Butt weld fittings are designed to have smooth inner surfaces, ensuring minimal friction and pressure drop in the flow of fluids. This characteristic makes them ideal for applications where flow velocity and efficiency are critical factors. Additionally, the absence of crevices or threads in butt weld fittings prevents the accumulation of debris, reducing the chances of contamination and facilitating easy cleaning and maintenance.

Comprehensive Range of Butt Weld Fittings

We take pride in offering a comprehensive range of buttweld pipe fittings, including

Butt Weld Elbows: Available in 45-degree, 90-degree, and 180-degree angles, providing flexibility in directing the flow of fluids.

Butt Weld Crosses: Ideal for intersecting pipelines, ensuring smooth fluid flow in multiple directions.

Butt Weld Caps: Used to seal the end of a pipe, protecting it from contaminants and preventing leakage.

Butt Weld Tees: Available as equal and unequal tees, facilitating even or uneven flow distribution.

Butt Weld Reducers: Both concentric and eccentric reducers for smooth transitions between pipes of different diameters.

Butt Weld Stub Ends: Facilitating easy flange connections without welding.

Advantages of Butt Weld Fittings

Excellent Structural Integrity: Butt weld fittings create a continuous and strong joint that enhances the structural integrity of the entire piping system. This is especially important in applications where safety and reliability are paramount.

Smooth Inner Surface: The absence of internal disruptions such as threads or flanges ensures a smooth inner surface, minimizing turbulence and pressure loss during fluid flow.

Strong and Reliable Joints: The welding process used to join the pipes ensures a permanent and robust connection, reducing the risk of leaks or failures.

Suitable for High-Pressure and High-Temperature Applications: Butt weld fittings are capable of withstanding extreme pressures and temperatures, making them suitable for critical and demanding industries.

Disadvantages of Butt Weld Fittings

Skilled Labor for Welding: Proper welding requires skilled labor, which may increase the installation cost compared to other types of fittings that do not require welding.

Slightly More Expensive: Butt weld fittings can be slightly more expensive than other fittings due to the welding process and the need for precision manufacturing.

Materials & Grades we offer - Buttweld Fittings

Stainless Steel Buttweld Fittings

SS 904L 

SS 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347, 446 

Titanium Buttweld Fittings

Titanium Alloy Gr 2 

Titanium Alloy Gr 5 

Monel Buttweld Fittings

Monel K500 

Monel 400 

Carbon Steel Buttweld Fittings

Inconel Buttweld Fittings

Inconel 718 

Inconel 600 

Inconel 601 

Inconel 625 

Alloy Steel Buttweld Fittings

Alloy Steel P5 

Alloy Steel P9 

Alloy Steel P11 

Alloy Steel P12 

Alloy Steel P22 

Alloy Steel P91 

Aluminium Buttweld Fittings

Nickel Buttweld Fittings

Nickel Alloy 200/201 

SMO 254 Buttweld Fittings

Duplex Steel Buttweld Fittings

Duplex UNS S32205 

Duplex UNS S31803 

Hastelloy Buttweld Fittings

Hastelloy C22, Hastelloy B2 

Hastelloy C276 

Super Duplex Steel Buttweld Fittings

Super Duplex Steel S32750 

Super Duplex Steel S32760 

Incoloy Buttweld Fittings

Incoloy 800/800H/800HT 

Incoloy 825 

Alloy 20 Buttweld Fittings

Applications of Buttweld Fittings

Buttweld fittings are a type of pipe fittings used to connect pipes or tubes with a butt welding process. They are widely used in various industries for a range of applications due to their structural integrity and reliability. Some of the common applications of buttweld fittings include:

Plumbing and Water Supply

Oil and Gas Industry

Chemical Processing

Petrochemical Industry

Power Generation

Pharmaceutical Industry

Food and Beverage Industry

HVAC Systems

Shipbuilding

Construction

Nuclear Power Plants

Other Application

How to Select the Right Butt Weld Fitting?

Choosing the right butt weld fitting is essential to achieve an efficient and reliable piping system. Consider the following factors during selection:

Project Requirements: Understand the specific needs of your project, such as fluid type, pressure, temperature, and flow rate.

Material Compatibility: Ensure that the material of the fitting is compatible with the material of the pipes to prevent corrosion and ensure longevity.

Fitting Dimensions: Select fittings with dimensions that match the pipe size to achieve a secure and leak-free joint.

Industry Standards and Codes: Adhere to industry-specific standards and codes to maintain the quality and safety of the piping system.

Installation and Welding Process of Buttweld Fittings

Proper installation and welding are critical to ensuring the effectiveness of buttweld pipe fittings. Follow these steps for a successful installation:

Preparation: Clean the pipe ends and fittings thoroughly to remove any dirt, grease, or debris that could affect the quality of the weld.

Alignment: Ensure precise alignment of the pipes and fittings before welding to create a strong and reliable connection.

Welding: Employ the appropriate welding method, such as TIG or MIG, to create a robust and leak-proof joint.

Inspection: Thoroughly inspect the welds for defects using non-destructive testing methods to ensure the integrity of the joints.

Leak Testing: Before putting the system into service, conduct a leak test to verify the integrity of the joints and prevent potential leaks.

Final Thoughts!..

Butt weld fittings are vital components in creating strong and reliable connections within piping systems. Bullion Pipes & Tubes LLP stands at the forefront as the leading butt weld fitting supplier, manufacturer, stockist, and exporter in India. With an extensive range of fittings and a commitment to quality, we cater to diverse industrial needs across India and various countries as well including Asia, Saudi Arabia, Singapore, Oman, Maldives, Vietnam, United Arab Emirates, Turkey, Qatar, Europe, Italy, Romania, Chile, Australia, Brazil, and Russia. Our buttweld pipe fittings offer exceptional strength, leak resistance, and versatility, making them the ideal choice for critical applications. When selecting the right fitting, consider the specific project requirements, material compatibility, and adherence to industry standards.

Choose Bullion Pipes & Tubes LLP for all your butt weld fitting needs, and experience excellence in quality and service. Contact us today to explore our vast range of fittings and find the perfect solution for your piping requirements.

[jaysteels]

The Role of Monel Fasteners in Petrochemical Refineries

Monel fasteners have emerged as one of the most sought-after choices in petrochemical refineries due to their safety, reliability, and efficiency. Jay Steel Corporation, serving as the premier Monel Fasteners Manufacturer, Supplier, Stockist, and Exporter in India, takes immense pride in presenting a comprehensive range of top-notch Monel fasteners, which includes the highly sought-after Monel 400 Fasteners and Monel K500 Fasteners. Our offerings encompass an array of essential components such as Bolts, Nuts, Washers, Screws, Stub Bolts, and Anchor Bolts. With a commitment to empowering our esteemed customers, we tailor our solutions perfectly to meet the unique requirements of their projects. Trust in Jay Steel Corporation for top-quality Monel 400 Fasteners from reliable Suppliers of Monel 400 Fasteners.

In this blog post, we will delve deep into the realm of Monel fasteners and explore how they play a pivotal role in the operations of petrochemical refineries.

What are Monel Fasteners?

Monel is a group of nickel-copper alloys known for their exceptional corrosion resistance, high strength, and excellent mechanical properties. These alloys are primarily composed of approximately 65-70% nickel and 20-29% copper, with small amounts of iron, manganese, carbon, and silicon. Monel fasteners exhibit unique properties that set them apart from traditional materials. The primary components of Monel are nickel and copper, with small amounts of other elements such as iron, manganese, and silicon.

Significance of Monel Fasteners in Petrochemical Refineries

Petrochemical refineries play a pivotal role in transforming raw materials into a wide range of essential products. However, their operations involve handling hazardous chemicals, extreme temperatures, and high pressures. The failure of a single fastener in critical equipment can have severe consequences. Here's why Monel fasteners are indispensable in petrochemical refineries:

Corrosion Resistance for Safety:

Safety is of paramount importance in any industrial setting, especially in petrochemical refineries. The ability of Monel fasteners to resist corrosion ensures that essential equipment, such as pipelines and reactors, remains intact and leak-free. This significantly reduces the risk of accidents, environmental contamination, and potential harm to personnel.

Enhanced Reliability:

Monel fasteners provide long-term reliability in demanding refinery environments. They maintain their integrity and performance over extended periods, reducing the need for frequent replacements and maintenance, ultimately leading to cost savings.

Preventing Downtime:

Unexpected equipment failures can lead to significant downtime and production losses. Monel fasteners' robustness and resistance to corrosion help prevent sudden breakdowns, ensuring continuous and uninterrupted refinery operations.

High Tensile Strength:

Monel fasteners possess excellent mechanical properties, including high tensile strength. This makes them capable of withstanding heavy loads and stresses encountered in refinery equipment, maintaining their integrity even under challenging conditions.

Temperature Resistance:

In the world of petrochemicals, temperature variations are common, and fasteners must be able to perform consistently across a wide range of temperatures. Monel fasteners boast excellent thermal stability, allowing them to retain their mechanical properties even in extremely hot or cold environments. This capability ensures smooth operations and minimizes downtime due to temperature-related issues.

Types of Monel Fasteners Used in Petrochemical Refineries

The diverse range of Monel fasteners offers solutions for various applications within petrochemical refineries. Understanding the specific functions of each type helps in making informed decisions for equipment assembly and maintenance.

Bolts: Monel bolts are extensively used in connecting heavy machinery, flanges, and pipelines in petrochemical refineries. Their high tensile strength and corrosion resistance make them reliable for critical joints.

Nuts: Monel nuts complement the use of bolts, providing secure and sturdy connections in refinery equipment. Their resistance to corrosion ensures that connections remain intact even under aggressive conditions.

Washers: Monel washers act as spacers and distribute loads evenly, reducing stress on fastener connections. They protect the equipment surface from damage and enhance the longevity of the fastened joints.

Screws: Monel screws are used for assembling components and fixing parts in petrochemical refinery equipment. Their corrosion resistance is crucial, especially in outdoor or corrosive environments.

Stub Bolts: Stub bolts, also known as stud bolts, are threaded rods used to secure flanges and other connections in refinery pipelines. Monel stub bolts withstand high pressures and temperatures, ensuring leak-free joints.

Anchor Bolts: Monel anchor bolts provide essential support for heavy equipment and structures in petrochemical refineries. Their robustness is vital for anchoring critical equipment in concrete foundations.

Why Choose Monel Fasteners over Alternatives?

With so many types of fasteners available in the market, why should petrochemical refineries specifically opt for Monel fasteners? The answer lies in their unmatched combination of properties that directly address the unique challenges faced by this industry.

Longevity and Reduced Maintenance

Due to their exceptional corrosion resistance and durability, Monel fasteners offer an extended service life compared to traditional alternatives. This longevity translates to reduced maintenance costs and minimizes the risk of sudden failures, providing peace of mind to refinery operators.

Improved Safety Standards

Safety is of utmost importance in the petrochemical industry. Monel fasteners' ability to withstand harsh conditions and temperature variations ensures the structural integrity of vital components, enhancing overall safety standards in the refinery.

Enhanced Efficiency

By utilizing Monel fasteners, petrochemical refineries can experience improved operational efficiency. The reduced need for frequent replacements and repairs allows the facility to focus on core processes, leading to enhanced productivity.

Applications in Petrochemical Refineries

Monel fasteners find a plethora of applications within petrochemical refineries, contributing significantly to the overall efficiency and safety of the facility. Some of the primary applications include:

Piping Systems

Heat Exchangers

Reactors and Pressure Vessels

Flange Connections

Distillation Columns

Storage Tanks

Reactor Internals

Instrumentation and Control Systems

Catalyst Regeneration Systems

Pump and Compressor Assemblies

Furnaces and Boilers

Ancillary Equipment and Many More

Best Practices for Choosing Monel Fasteners

Selecting the appropriate Monel fasteners for petrochemical refinery applications requires careful consideration of several factors. By following these best practices, refinery professionals can ensure optimal performance and safety:

Assessing Environmental Conditions: Understand the specific environmental conditions in which the fasteners will operate. Consider factors such as exposure to corrosive chemicals, temperature variations, and humidity levels.

Identifying Material Requirements: Determine the suitable Monel grade based on the severity of corrosion expected and the mechanical properties required for the application.

Adhering to Industry Standards: Ensure that the chosen Monel fasteners comply with relevant industry standards and specifications. This guarantees their suitability and performance in petrochemical refinery settings.

Collaborating with Manufacturers: Consult with reputable manufacturers like Jay Steel Corporation, who have expertise in supplying Monel fasteners for petrochemical applications. Being Monel Fasteners Manufacturers, they can offer valuable insights and guidance in selecting the right fasteners.

Installation and Maintenance of Monel Fasteners

Proper installation and regular maintenance play vital roles in maximizing the performance and longevity of Monel fasteners in petrochemical refineries:

Installation Techniques: Follow the recommended installation guidelines provided by the fastener manufacturer. Improper installation can lead to reduced fastener life and compromised equipment integrity.

Regular Inspections: Implement a comprehensive inspection program to identify signs of corrosion, wear, or damage in Monel fasteners. Timely detection allows for prompt replacements, preventing potential failures.

Preventive Maintenance: Periodically lubricate Monel fasteners and take preventive measures to protect them from harsh environmental conditions. Routine maintenance ensures the fasteners' reliability and extends their service life.

Final Thoughts!..

Monel fasteners are now essential elements in the petrochemical sector, effectively maintaining the safety, dependability, and productivity of refinery activities. Their remarkable ability to resist corrosion and possess high tensile strength significantly contributes to accident prevention, reduced downtime, and the protection of both personnel and the environment. As the leading Monel Fasteners Manufacturer, Supplier, Stuckist, and Exporter in India, Jay Steel Corporation takes pride in supplying high-quality Monel fasteners that meet industry standards and cater to diverse project requirements. Petrochemical refineries must prioritize the selection of reliable fasteners to enhance operational performance and secure their critical assets. Our Monel Flanges have earned a stellar reputation in India and have gained significant demand worldwide, including in countries such as Singapore, Malaysia, Nigeria, Tunisia, the USA, France, Saudi Arabia, Kuwait, Qatar, and more. Through strategic partnerships with trusted manufacturers and adherence to best practices, the petrochemical industry can forge ahead towards safer, more efficient, and sustainable operations, with Monel fasteners serving as indispensable allies.

[jaysteels]

Monel Flanges vs. Other Flange Materials: A Comparative Analysis

Monel Flanges vs. Other Flange Materials: A Comparative Analysis

When it comes to industrial piping systems, the choice of flange material plays a pivotal role in ensuring peak performance and long-lasting functionality. Among the myriad materials available, Monel stands out as one of the most popular and reliable options. As the leading Monel Flanges Manufacturer, Supplier, Stockist, and Exporter in India, we take pride in offering a wide range of options to cater to diverse project requirements. Our Monel Flanges come in various sizes, specifications, standards, and grades, including the popular Monel 400 Flanges and Monel K500 Flanges.

Moreover, we offer different types of flanges, such as Slip On Flanges, Weld Neck Flanges, Socket Weld Flanges, Blind Flanges, Orifice Flanges, Reducing Flanges, Ring Type Joint Flange, Spectacle Blind Flanges, and Lap Joint Flanges, ensuring that you find the perfect fit for your projects. With our expertise and dedication as suppliers of Monel 400 Flanges and other products, we strive to meet the highest industry standards and be your preferred partner for all your Monel Flange needs in India and beyond.

In this blog post, we will explore the unique advantages of Monel Flanges over other flange materials, demonstrating why they are the preferred choice for critical applications across various industries.

Understanding Flanges and Their Role in Industrial Piping

Before we dive into the comparison, let's briefly understand what flanges are and why they are vital in industrial piping systems. Flanges are flat, circular discs with evenly spaced bolt holes used to connect pipes, valves, and other equipment in a piping network. Their primary functions include providing support, facilitating alignment, and allowing for easy assembly and disassembly of components.

Exploring Monel Flanges

Monel Flanges are a class of nickel-copper alloy flanges renowned for their exceptional properties. The composition primarily consists of nickel and copper, with additions of small amounts of iron, manganese, and other elements. This alloy's chemical composition results in a combination of impressive characteristics, including excellent corrosion resistance, high tensile strength, and exceptional temperature stability.

The corrosion resistance of Monel Flanges is particularly noteworthy, making them suitable for use in harsh and corrosive environments. They perform exceptionally well in marine applications, offshore drilling, and chemical processing industries where exposure to seawater, acids, and alkalis is common. The resistance to localized corrosion, such as pitting and crevice corrosion, adds to their popularity.

Comparing Monel Flanges with Other Flange Materials

To make an informed decision, it is essential to compare Monel Flanges with other commonly used flange materials, such as stainless steel, carbon steel, Inconel, and Alloy 20.

Stainless Steel Flanges

Stainless steel flanges are widely used due to their general corrosion resistance and cost-effectiveness. However, when compared to Monel Flanges, they may fall short in highly corrosive environments. Monel Flanges, with their higher nickel content, exhibit superior resistance to chloride-induced stress corrosion cracking, a common concern in stainless steel.

Carbon Steel Flanges

Carbon steel flanges are widely used in various industries due to their affordability and mechanical properties. However, they lack the corrosion resistance required for aggressive environments. Monel Flanges outshine carbon steel in corrosive atmospheres, making them the preferred choice for applications where durability and longevity are crucial.

Inconel Flanges

Inconel is another popular nickel-based alloy known for its high-temperature strength. While Inconel Flanges offer excellent performance in extreme heat, they may not provide the same level of corrosion resistance as Monel Flanges. For applications where both heat and corrosion resistance are essential, they prove to be the optimal choice.

Alloy 20 Flanges

Alloy 20, also known as Carpenter 20, is a nickel-chromium-molybdenum stainless steel alloy that offers excellent resistance to corrosion and pitting. While Alloy 20 is suitable for many corrosive environments, it may not match the overall corrosion resistance and mechanical properties of Monel Flanges.

Advantages of Monel Flanges

The advantages of using Monel Flanges extend far beyond their corrosion resistance. Let's explore the various reasons why they are a preferred choice in different industries and applications.

High Tensile Strength and Temperature Stability

Monel Flanges are known for their high tensile strength, which ensures they can withstand significant mechanical stress without deformation. This property makes them suitable for applications where the flanges are exposed to high-pressure conditions, such as in oil and gas pipelines, chemical reactors, and high-temperature environments.

Durability and Longevity

Monel Flanges exhibit exceptional durability and longevity, even in the most demanding conditions. Their ability to withstand extreme weather conditions, abrasive elements, and frequent exposure to corrosive substances makes them a reliable choice for critical applications with long operational lifespans.

Resistance to Biofouling and Microbial Corrosion

In marine and offshore industries, biofouling and microbial corrosion can pose significant challenges. Monel Flanges possess inherent resistance to these issues, making them ideal for use in seawater desalination plants, offshore platforms, and shipbuilding.

Excellent Weldability and Formability

Monel Flanges are known for their excellent weldability and formability. They can be easily welded, machined, and formed into complex shapes, allowing for greater design flexibility and ease of installation.

Low Risk of Contamination

For industries dealing with sensitive materials such as pharmaceuticals and food processing, Monel Flanges offer a low risk of contamination. Their non-reactive nature ensures that they do not leach any harmful substances into the conveyed fluids or products.

Key Considerations for Choosing Flange Materials

Selecting the appropriate flange material is crucial to ensuring the success and safety of your projects. Here are some key considerations to keep in mind when choosing flange materials:

Operating Conditions

Evaluate the temperature and pressure conditions under which the flanges will operate. Monel Flanges, with their excellent high-temperature and pressure capabilities, are an ideal choice for applications where these factors are critical.

Corrosive Environment

Consider the nature of the fluid being transported and the corrosive environment in which the flanges will operate. Monel Flanges excel in corrosive atmospheres, providing reliable performance and extended service life.

Industry Standards and Certifications

Ensure that the chosen flange materials meet industry standards and certifications. At Jay Steel Corporation, we take pride in adhering to global standards, providing our customers with the assurance of top-quality products.

Cost-Effectiveness

While Monel Flanges may have a higher initial cost compared to some other materials, their long-term durability and low maintenance costs make them a cost-effective choice in the long run.

Expert Guidance

Seek expert guidance from professionals who can analyze your project requirements and recommend the most suitable flange material. At Jay Steel Corporation, our team of experts is always ready to assist you in making the right choice.

Applications of Monel Flanges

Monel flanges are essential components used in various industries due to their unique properties and corrosion-resistant nature. Monel is a group of nickel-copper alloys known for their excellent resistance to seawater, acids, alkalis, and various corrosive environments. Here are some of the common applications:

Marine industry

Oil and Gas industry

Chemical processing

Aerospace industry

Power generation

Seawater desalination

Food processing

Pharmaceutical industry

Water treatment

Nuclear industry

Other Application

Final Thoughts!..

Monel Flanges emerge as the ideal choice for critical applications where corrosion resistance, high strength, and temperature stability are paramount. Their exceptional properties and performance set them apart from other flange materials, making them the preferred option for industries such as marine, offshore, chemical processing, aerospace, and so on.

As India's leading Monel Flanges Manufacturer, Supplier, Stockist, and Exporter in India, Jay Steel Corporation is committed to delivering top-notch products that cater to your specific project requirements. Our Monel Flanges are not only highly regarded in India but are also in demand across the globe, with exports to countries such as Singapore, Malaysia, Nigeria, the USA, France, Saudi Arabia, Kuwait, Tunisia, Qatar, and more. Our products have gained international acceptance due to their unmatched quality, reliability, and adherence to global standards and certifications.

[bullionpipestainlesssteel]

What are Flanges and their types?

Flanges are an essential component of any piping system, as they provide a secure and leak-free connection between two pipes or valves. As the leading Flanges manufacturers, suppliers, and exporters in India, Bullion Pipes & Tubes LLP understands the importance of choosing the right type of flange for your application. 

In this blog post, we will cover everything you need to know about flanges, including their types, materials, and applications.

  Before we dive into the details, let's start with the basics!

 Introduction 

Flanges are mechanical connectors used to join two pipes or valves. They are usually made of steel, and their main purpose is to provide a tight and leak-free seal between the two parts. Flanges come in various types and sizes, and choosing the right type of flange is essential for the safety and efficiency of your piping system.

Types of Flanges? 

Flanges come in several types, including weld neck, slip-on, socket weld, lap joint, threaded, and blind flanges. Each type has its unique characteristics and applications, and selecting the right one will depend on several factors, such as pressure ratings, temperature ratings, size, material compatibility, and cost.

 ●      Weld Neck Flanges

Weld neck flanges are the most common type of flange, known for their high durability and strength. They are welded to the pipe or valve, making them ideal for high-pressure and high-temperature applications.

 ●      Slip-On Flanges

Slip-on flanges are easy to install and remove, making them ideal for applications that require frequent maintenance. They slide over the pipe or valve and are then welded or bolted in place.

 ●      Socket Weld Flanges

Socket weld flanges are similar to slip-on flanges, but they are welded only on the outer side of the flange, leaving the inner side free of welding marks. They are ideal for smaller-sized pipes and low-pressure applications.

 ●      Lap Joint Flanges

Lap joint flanges are used when a piping system requires dismantling frequently. They are also ideal for applications that require easy access to the pipe or valve.

 ●      Threaded Flanges

Threaded flanges are designed to be screwed onto the pipe or valve, making them ideal for applications that require easy installation and removal. They are commonly used in low-pressure applications.

 ●      Blind Flanges

Blind flanges are used to seal the end of a pipe or valve. They are commonly used for pressure testing and maintenance purposes.

 Materials & Grades Available In Flanges with Bullion Pipes & Tubes LLP

 Flanges can be made of various materials & Grades, such as,

●      Stainless Steel - 904L Flanges, 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Flanges

●      Hastelloy Flanges - C22, B2 Flanges, C276 Flanges

●      Carbon Steel Flanges - ASTM A350 15LF1, LF2 CL1/CL2, LF3 CL1/CL2 Carbon Steel Flanges

●      Nickel Alloy - 200/201 

●      Duplex Steel Flanges - Duplex UNS S32205/31803 Flanges

●      Alloy Steel Flanges - P5, P9, P11, P12, P22, P91 Flanges 

●      Super Duplex Steel - UNS S32750/S32760 Flanges

●      Titanium Alloys - Gr 2 Flanges, Gr 5 Flanges, Gr 7 Flanges 

●      Aluminium Flanges - 5052 Reducing Flanges, 5082 Flanges, 5082 Flanges, 6063 SORF Flanges, 6082 Blind Flanges, 2024 Aluminum Weld Neck Flanges, and 5052 Threaded Flanges.

●      Tantalum Flanges - ASTM B521 Tantalum Flanges, Spectacle Blind Flanges, Orifice Flange, Ta-10W Flanges, Tantalum UNS R05200 Flanges, ASTM B365 Ta2.5W Flanges 

●      Monel Flanges - Monel K500 Flanges, Monel 400 Flanges 

●      Alloy 20 Flanges - Alloy 20 RTJ Flange, Alloy 20 WNRF Flanges, Alloy UNS N08020 Pipe Flanges, Alloy 20 Weld Neck Flange, Alloy 20 Nipo Flanges, ASTM B462 Alloy Threaded Flanges, Alloy 20 Spectacle Blind Flanges, Alloy 20 Industrial Flanges, and UNS N08020 Alloy 20 Forged Flanges

●      SMO 254 Flanges

●      Inconel Flanges - Inconel 718, 600, 601 and 625 Flanges

●      Incoloy Flanges - 825, 800/800H/800HT Flanges

Choosing the right material for your flange will depend on several factors, such as the application's temperature, pressure, and corrosion resistance requirements.

 Factors to Consider When Selecting Flanges

Selecting the right flange for your application can be challenging, as there are several factors to consider, such as pressure ratings, temperature ratings, size, material compatibility, and cost. At Bullion Pipes & Tubes LLP, we can help you choose the right flange for your application, ensuring safety and efficiency.

 Flange Standard Ratings

Flanges come in various standard ratings, such as ANSI, API, DIN, and JIS. These ratings determine the flange's pressure-temperature rating and its compatibility with other components in the piping system.

 Flange Installation

Proper flange installation is essential for the safety and efficiency of your piping system. It involves several steps, such as preparation of the piping system, installation of the flanges, flange tightening process, flange alignment, and testing and inspection.

 Maintenance and Repair of Flanges

Maintaining and repairing flanges is critical for the longevity and safety of your piping system. Regular inspections, leak checks, and maintenance can help detect any potential issues before they become a more significant problem.

 Applications of Flanges

Flanges have a wide range of applications in various industries, including: 

●      Oil and Gas Industry

●      Petrochemical Industry

●      Chemical Industry

●      Power Generation Industry

●      Water Treatment Industry

 They are used in various applications, including HVAC systems, plumbing, and firefighting systems.

 Why Choose Bullion Pipes & Tubes LLP for Flanges? 

As the leading Flanges manufacturers, suppliers, and exporters in India, Bullion Pipes & Tubes LLP offers a wide range of flanges made from high-quality materials. We provide customized solutions to meet our customers' specific needs, and our flanges are available in various sizes, ratings, and materials.

We have been providing high-quality flanges to various countries, such as Ukraine, Australia, Syria, Iraq, Iran, Kazakhstan, Russia, Brazil, Armenia, Azerbaijan, Egypt, South Africa, Qatar, Turkey, Oman, Bahrain, and Germany, and our products are known for their durability, reliability, and safety.

 Conclusion

Flanges are a critical component of any piping system, and selecting the right type of flange for your application is essential for safety and efficiency. Choosing a reliable and trustworthy supplier like Bullion Pipes & Tubes LLP can ensure that you get high-quality flanges that meet your specific requirements.

[viren-123]

Monel 400 ( 2.4360) Slip On Flange 

Monel Slip-On Pipe Flanges, As made obvious by their name, these pipe flanges slip over the pipe. They're manufactured with an inside diameter that is slightly bigger than the pipe's outside diameter. These attachments are connected to the pipe via fillet weld at the top and bottom of the flange.

However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation. Moreover, weld-neck flanges have a higher life expentancy than slip-on flanges under duress. It is fabricated with an inside diameter that is bigger than the pipe’s outside distance across. These connections are associated with the pipe by means of filet weld at the tel-slip-on-flange.htmlop and base of the flange.

Monel Slip-on flanges are all bored slightly larger than the O.D. of the pipe. They are preferred over welding neck flanges bu many users due to their lower intial cost, but final intallation cost is probably not much less than that of the welding neck flange because of the additional welding involved.

B16.5 ASTM A182 Slip On Flange, Fusion Bonded Epoxy Coating, EN 1092-2 PN16 Slip On Flange, ASME B16.5 Dual Monel Slip On Flange, ANSI B16.5 Class 150 Flat Face Slip On Flange, Monel K500/400 30 Inch Slip On Flange Stockiest.

Standards Specification:

Size : 1/2" to 48"

Specifications : ASTM A182

Rating: 150#, 300#, 600 (2.4640)#, 900#, 1500#, 2500#,

Material & Grade :

Stainless Steel :Grade: 304 (1.4301), 304L (1.4307), 304H (1.4948), 309 (1.4828), 309S, 310, 310S (1.4845) , 316 ( 1.4401), 316H, 316L( 1.4404 /1.4432) , 317, 317L (1.4438), 321 (1.4541), 321 H(1.4878), 347 (1.4550), 347H (1.4961), 904L (1.4539) Duplex Steel:Grade: 2205 (1.4507) Super Duplex Steel:Grade: 2507 (UNS S32750) (1.4410) (UNS S32750) Inconel :Grade: Inconel 600 (2.4640), Inconel 601 (2.4851), Inconel 625 (2.4856), Inconel 718(2.4668) Incoloy :Grade: Incoloy 800 (2.4958), Incoloy 800H, Incoloy 800HT Nickel :Grade: Nickel 200, Nickel 201 Titanium :Grade: Gr.1 (3.7025) , Gr.2 (3.7035) , Gr.3:(3.7055) , Gr.5(3.7164/65), Gr. 7(3.7235) , Gr. 11 (3.7225) Hastalloy :Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X.

For More Information Visit Our Website - http://www.kobsindia.in/monel-slip-on-flange.html Contact Us -9819523999 Email Id - exports@kobsindia.in