#Monel Alloy 400 Blind Flange

[viren-123]

Monel K500 Blind Flanges Exporters

Monel Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types. A Blind flange is round plate which has all of the relevant boltholes but no center hole, and because of this feature this flange is used to close off the ends of a piping systems and pressure vessel openings. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened.

However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications.

Monel Blind Flanges are used for testing the flow of gas or liquid through a pipeline or vessel. It helps to close the end of piping systems or vessel openings. It allows easy access to the pipeline when there is a requirement to work done inside the line. They are used in high pressure applications available in all grades, materials, size and specifications. Blind pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for blind pipe flanges, the standard height is 1/16" for blind pipe flanges under 400 ( 2.4360)#. For blind pipe flanges of 400 ( 2.4360)# and up, the standard blind pipe flange raised face height is 1/4".

B16.5 ASTM A182 Blind Flange, Fusion Bonded Epoxy Coating, EN 1092-2 PN16 Blind Flange, ASME B16.5 Dual Monel Alloy Blind Flange, ANSI B16.5 Class 150 Flat Face Blind Flange, Monel Alloy Reducing Blind Flange Stockiest.

Standards Specification:

Size : 1/2" to 48"

Specifications : ASTM A182

Rating: 150#, 300#, 600 (2.4640)#, 900#, 1500#, 2500#,

Material & Grade :

Stainless Steel :Grade: 304 (1.4301), 304L (1.4307), 304H (1.4948), 309 (1.4828), 309S, 310, 310S (1.4845) , 316 ( 1.4401), 316H, 316L( 1.4404 /1.4432) , 317, 317L (1.4438), 321 (1.4541), 321 H(1.4878), 347 (1.4550), 347H (1.4961), 904L (1.4539) Duplex Steel:Grade: 2205 (1.4507) Super Duplex Steel:Grade: 2507 (UNS S32750) (1.4410) (UNS S32750) Inconel :Grade: Inconel 600 (2.4640), Inconel 601 (2.4851), Inconel 625 (2.4856), Inconel 718(2.4668) Incoloy :Grade: Incoloy 800 (2.4958), Incoloy 800H, Incoloy 800HT Nickel :Grade: Nickel 200, Nickel 201 Titanium :Grade: Gr.1 (3.7025) , Gr.2 (3.7035) , Gr.3:(3.7055) , Gr.5(3.7164/65), Gr. 7(3.7235) , Gr. 11 (3.7225) Hastalloy :Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X.

For More Information Visit Our Website - http://www.kobsindia.in/monel-blind-flange.html Contact Us -9819523999 Email Id - exports@kobsindia.in

[metalforgeindia]

Monel 400 Flanges Manufacturers in Kuwait – Metalforgeindia

Monel 400 is a high-performance alloy primarily composed of nickel (about 63%) and copper, with small quantities of manganese, iron, and different factors. Known for its notable corrosion resistance, specifically in marine and chemical environments, Monel 400 is broadly used in applications wherein sturdiness and reliability are important. One of the vital issues products crafted from Monel 400 is Monel 400 flanges, which might be vital additives utilized in piping systems to attach, regular, and seal sections of pipe.

In Kuwait, wherein industries together with oil and gasoline, petrochemicals, and marine operations are outstanding, the call for the flanges of Monel 400 is on the rise. As industries in Kuwait require remarkable, corrosion-resistant materials for excessive conditions, Metal Forge India – a relied-on call within the delivery and manufacturing of flanges of Monel 400 – meets the stringent extremely good necessities and might offer pinnacle-notch material.

What Are the Flanges of Monel 400?

To sign up for pipes or connect a pipe to a valve, pump, or different system, flanges are mechanical additions. They encompass blind flanges, weld neck flanges, and slip-on flanges and are packaged in plenty of office work. In addition to its functionality to withstand immoderate temperatures and strain, the alloy used to create Monel's 400 flanges is famed for its terrific resistance to acidic and alkaline environments.

Key Features of Flanges of Monel 400:

Corrosion Resistance: Monel 400 gives first-rate resistance to a huge form of corrosive media, alongside seawater, acids, alkalis, and brine. This makes flanges of Monel 400 nice for use in harsh environments which include offshore drilling structures, marine vessels, and chemical processing flora.

High Strength and Durability: Flanges of Monel 400 maintain high tensile electricity even in severe temperatures, making them alternatively durable below demanding conditions.

Non-Magnetic: Monel 400 is non-magnetic, which is a vital asset for sure packages in which magnetism may want to intervene with operations.

Excellent Weldability: The alloy’s superb weldability makes it appropriate for manufacturing complicated additives, such as flanges, without compromising the material’s features.

Applications of Flanges of Monel 400

Flanges of Monel 400 are utilized in several important industries and applications, way to their notable physical and chemical capabilities. Some of the primary makes use of consist of the following:

Marine and Offshore: Flanges of Monel 400 are extensively implemented in marine applications, collectively with shipbuilding, seawater pumps, and underwater devices. The product's resistance to seawater corrosion makes it superb for those harsh environments.

Chemical Processing: In industries managing acids, alkalis, and different corrosive materials, flanges of Monel 400 are used to make certain that piping structures remain intact and proof in competition to corrosion.

Oil and Gas Industry: Flanges of Monel 400 are crucial in the oil and fuel quarter, wherein they will be used in refineries, pipelines, and offshore structures to move each gasoline and liquid below immoderate stress.

Power Plants: These flanges are also utilized in energy plants, especially human beings with excessive-stress boilers or in systems that address steam and water at severe temperatures.

Why Choose Flanges of Monel 400?

The primary reason to select the flanges of Monel 400 over different substances is their superior corrosion resistance, specifically in environments exposed to seawater, acidic answers, and immoderate-temperature application. Some greater benefits of Monel's 400 flanges encompass:

Cost-Effectiveness: While Monel 400 can be greater expensive than some exclusive alloys, the sturdiness and extended service lifestyles it offers can extensively reduce upkeep and replacement prices through the years.

Long-Lasting Performance: Thanks to their excessive resistance to pressure corrosion cracking, Monel's 400 flanges are carried out reliably over prolonged intervals, even under intense conditions.

Versatility: Monel 400 flanges are flexible for many industries and may be used in several applications, along with pressure vessels, warmth exchangers, and marine systems.

Kuwaiti Manufacturers of Monel 400 Flanges 

Finding an issuer that gives remarkable materials and shipping alternatives is crucial when obtaining Monel 400 flanges in Kuwait. We are a trusted issuer of flanges of the Monel 400 and have set up ourselves as a chief manufacturer catering to industries in Kuwait and at some stage in the Middle East. Their commitment to exquisite, precision engineering and customer support guarantees that clients collect only the top-notch.

Why Metal Forge India?

Global Reach: We have a robust distribution community in Kuwait and the Middle East, ensuring nicely timed transport of flanges of Monel 400 and special specialized products.

High-Quality Manufacturing: They observe strict best control procedures, making sure that every flange meets international requirements, providing long-lasting performance and high corrosion resistance.

Customized Solutions: Understanding that precise responsibilities may also moreover require particular specifications, we gives customized flange solutions, ensuring that the material and dimensions meet the appropriate needs of their customers.

We are Your Trusted Partner for Flanges of Monel 400

For industries in Kuwait that demand high-typical performance flanges of Monel 400, we are your dependable associate. Known for its willpower to deliver brilliant products, we provide flanges of Monel 400 to severa sectors in Kuwait, ensuring they meet the very excellent standards of tremendous and basic overall performance. Whether you need fashionable or custom-sized flanges of Monel 400, we have the understanding and stock to meet your dreams.

Conclusion

Monel 400 flanges are vital components in industries that require corrosion-resistant materials and high-electricity overall performance, in particular in tough environments just like the ones located in Kuwait. From marine corporations to grease and gasoline, the flanges of Monel 400 offer advanced protection in the direction of corrosion and excessive situations.

Whether you're looking for a Monel 400 flange manufacturer or a depended-on company in Kuwait, Metal Forge India provides the knowledge, best products, and services you need. By deciding on flanges of Monel 400 from these trusted suppliers, you make sure that your piping structures will perform reliably and adequately inside the harshest conditions, retaining their integrity and lengthening the lifespan of your infrastructure.

For your Monel 400 flange requirements, appearance no further than us for the super products and services tailor-made to fulfill your particular desires.

[merakistar]

Chevron Corporation approved flanges in UAE

Meraki Star Metals Oil & Gas Equipment Trading L.L.C offers a wide range of Monel Alloy 400 Flanges, all manufactured from high-quality metal. Monel 400 Slip-on Flanges (UNS N04400) are robust alloys that should be hardened by cooling. Welding methods including gas-tungsten arc welding, metal-cored welding, gas-metal-arc welding, and submerged-arc welding are recommended for these Monel 400 Flanges. Significant machining equipment and tooling are necessary for Monel 400 Weld Neck Flanges to minimize spatter or work-hardening of the material before cutting.

Monel 400 Outwardly Impeded Flanges are known for their resistance to attack by acids and alkalis, as well as their high mechanical strength and excellent flexibility. Additionally, these Monel 400 Lap Joint Flanges are available in various sizes and shapes to meet customer needs. As a modern alloy, Monel 400 Connection Weld Flanges benefit significantly from double melting via the Electro Slag Refining (ESR) process. This process ensures the production of the cleanest and highest quality Monel 400 Ring Joint Type Flanges.

Post-weld heat treatment is not required for these Monel 400 Exhibition Blind Flanges. However, thorough cleaning after welding is essential to ensure optimal corrosion resistance in Monel 400 Nippolet Flanges, as failure to do so may result in contamination and embrittlement.

Monel 400 Pipe Flanges Specifications

Specifications: ASTM B564 / ASME SB564

Size:1/2″NB TO 60″NB

Standards: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Class / Pressure: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Standard:ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

For More Information:

Visit Our Website:  https://www.merakimetals.ae

Contact No:  +971-523973687

E-Mail ID:  info@merakimetals.ae

[jaysteels]

Monel Flanges vs. Other Flange Materials: A Comparative Analysis

Monel Flanges vs. Other Flange Materials: A Comparative Analysis

When it comes to industrial piping systems, the choice of flange material plays a pivotal role in ensuring peak performance and long-lasting functionality. Among the myriad materials available, Monel stands out as one of the most popular and reliable options. As the leading Monel Flanges Manufacturer, Supplier, Stockist, and Exporter in India, we take pride in offering a wide range of options to cater to diverse project requirements. Our Monel Flanges come in various sizes, specifications, standards, and grades, including the popular Monel 400 Flanges and Monel K500 Flanges.

Moreover, we offer different types of flanges, such as Slip On Flanges, Weld Neck Flanges, Socket Weld Flanges, Blind Flanges, Orifice Flanges, Reducing Flanges, Ring Type Joint Flange, Spectacle Blind Flanges, and Lap Joint Flanges, ensuring that you find the perfect fit for your projects. With our expertise and dedication as suppliers of Monel 400 Flanges and other products, we strive to meet the highest industry standards and be your preferred partner for all your Monel Flange needs in India and beyond.

In this blog post, we will explore the unique advantages of Monel Flanges over other flange materials, demonstrating why they are the preferred choice for critical applications across various industries.

Understanding Flanges and Their Role in Industrial Piping

Before we dive into the comparison, let's briefly understand what flanges are and why they are vital in industrial piping systems. Flanges are flat, circular discs with evenly spaced bolt holes used to connect pipes, valves, and other equipment in a piping network. Their primary functions include providing support, facilitating alignment, and allowing for easy assembly and disassembly of components.

Exploring Monel Flanges

Monel Flanges are a class of nickel-copper alloy flanges renowned for their exceptional properties. The composition primarily consists of nickel and copper, with additions of small amounts of iron, manganese, and other elements. This alloy's chemical composition results in a combination of impressive characteristics, including excellent corrosion resistance, high tensile strength, and exceptional temperature stability.

The corrosion resistance of Monel Flanges is particularly noteworthy, making them suitable for use in harsh and corrosive environments. They perform exceptionally well in marine applications, offshore drilling, and chemical processing industries where exposure to seawater, acids, and alkalis is common. The resistance to localized corrosion, such as pitting and crevice corrosion, adds to their popularity.

Comparing Monel Flanges with Other Flange Materials

To make an informed decision, it is essential to compare Monel Flanges with other commonly used flange materials, such as stainless steel, carbon steel, Inconel, and Alloy 20.

Stainless Steel Flanges

Stainless steel flanges are widely used due to their general corrosion resistance and cost-effectiveness. However, when compared to Monel Flanges, they may fall short in highly corrosive environments. Monel Flanges, with their higher nickel content, exhibit superior resistance to chloride-induced stress corrosion cracking, a common concern in stainless steel.

Carbon Steel Flanges

Carbon steel flanges are widely used in various industries due to their affordability and mechanical properties. However, they lack the corrosion resistance required for aggressive environments. Monel Flanges outshine carbon steel in corrosive atmospheres, making them the preferred choice for applications where durability and longevity are crucial.

Inconel Flanges

Inconel is another popular nickel-based alloy known for its high-temperature strength. While Inconel Flanges offer excellent performance in extreme heat, they may not provide the same level of corrosion resistance as Monel Flanges. For applications where both heat and corrosion resistance are essential, they prove to be the optimal choice.

Alloy 20 Flanges

Alloy 20, also known as Carpenter 20, is a nickel-chromium-molybdenum stainless steel alloy that offers excellent resistance to corrosion and pitting. While Alloy 20 is suitable for many corrosive environments, it may not match the overall corrosion resistance and mechanical properties of Monel Flanges.

Advantages of Monel Flanges

The advantages of using Monel Flanges extend far beyond their corrosion resistance. Let's explore the various reasons why they are a preferred choice in different industries and applications.

High Tensile Strength and Temperature Stability

Monel Flanges are known for their high tensile strength, which ensures they can withstand significant mechanical stress without deformation. This property makes them suitable for applications where the flanges are exposed to high-pressure conditions, such as in oil and gas pipelines, chemical reactors, and high-temperature environments.

Durability and Longevity

Monel Flanges exhibit exceptional durability and longevity, even in the most demanding conditions. Their ability to withstand extreme weather conditions, abrasive elements, and frequent exposure to corrosive substances makes them a reliable choice for critical applications with long operational lifespans.

Resistance to Biofouling and Microbial Corrosion

In marine and offshore industries, biofouling and microbial corrosion can pose significant challenges. Monel Flanges possess inherent resistance to these issues, making them ideal for use in seawater desalination plants, offshore platforms, and shipbuilding.

Excellent Weldability and Formability

Monel Flanges are known for their excellent weldability and formability. They can be easily welded, machined, and formed into complex shapes, allowing for greater design flexibility and ease of installation.

Low Risk of Contamination

For industries dealing with sensitive materials such as pharmaceuticals and food processing, Monel Flanges offer a low risk of contamination. Their non-reactive nature ensures that they do not leach any harmful substances into the conveyed fluids or products.

Key Considerations for Choosing Flange Materials

Selecting the appropriate flange material is crucial to ensuring the success and safety of your projects. Here are some key considerations to keep in mind when choosing flange materials:

Operating Conditions

Evaluate the temperature and pressure conditions under which the flanges will operate. Monel Flanges, with their excellent high-temperature and pressure capabilities, are an ideal choice for applications where these factors are critical.

Corrosive Environment

Consider the nature of the fluid being transported and the corrosive environment in which the flanges will operate. Monel Flanges excel in corrosive atmospheres, providing reliable performance and extended service life.

Industry Standards and Certifications

Ensure that the chosen flange materials meet industry standards and certifications. At Jay Steel Corporation, we take pride in adhering to global standards, providing our customers with the assurance of top-quality products.

Cost-Effectiveness

While Monel Flanges may have a higher initial cost compared to some other materials, their long-term durability and low maintenance costs make them a cost-effective choice in the long run.

Expert Guidance

Seek expert guidance from professionals who can analyze your project requirements and recommend the most suitable flange material. At Jay Steel Corporation, our team of experts is always ready to assist you in making the right choice.

Applications of Monel Flanges

Monel flanges are essential components used in various industries due to their unique properties and corrosion-resistant nature. Monel is a group of nickel-copper alloys known for their excellent resistance to seawater, acids, alkalis, and various corrosive environments. Here are some of the common applications:

Marine industry

Oil and Gas industry

Chemical processing

Aerospace industry

Power generation

Seawater desalination

Food processing

Pharmaceutical industry

Water treatment

Nuclear industry

Other Application

Final Thoughts!..

Monel Flanges emerge as the ideal choice for critical applications where corrosion resistance, high strength, and temperature stability are paramount. Their exceptional properties and performance set them apart from other flange materials, making them the preferred option for industries such as marine, offshore, chemical processing, aerospace, and so on.

As India's leading Monel Flanges Manufacturer, Supplier, Stockist, and Exporter in India, Jay Steel Corporation is committed to delivering top-notch products that cater to your specific project requirements. Our Monel Flanges are not only highly regarded in India but are also in demand across the globe, with exports to countries such as Singapore, Malaysia, Nigeria, the USA, France, Saudi Arabia, Kuwait, Tunisia, Qatar, and more. Our products have gained international acceptance due to their unmatched quality, reliability, and adherence to global standards and certifications.

[chhajed9000]

Blind Flanges Exporters in India

These level face steel blind flanges are utilized to clear off pipelines, valves and pumps, it can likewise be utilized as a review spread. Blind flanges is some of the time alluded to as a blanking flanges. Experienced experts are engaged with us who fabricate these flanges with great accuracy. We are recognized blind flanges manufacturer.

Standards:

ANSI B 16.5 Class 150

ANSI B 16.5 Class 300

ANSI B 16.5 Class 600

ANSI B 16.5 Class 900

ANSI B 16.5 Class 1500

ANSI B 16.5 Class 2500

Stainless Steel :

ASTM A 182, A 240

Grade:

F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel:

ASTM A 105, ASTM A 181

Alloy Steel:

ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys:

Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys:

Copper, Brass & Gunmetal

Size:

1/8" NB TO 48"NB.

Class:

150#, 300#,400 #,600#,900#, 1500# & 2500 #.

ANSI:

ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

DIN:

DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

B.S:

BS4504 , BS4504, BS1560, BS10

[flangesnuts]

JIS B 2311 / 2312 / 1213 Flange

JIS B 2311 Blind Flanges, JIS B 2312 Slip on Flanges, Nickel Alloy JIS B 2311 Flanges, JIS B 2311 Class 300 Flanges, JIS B 1213 Raised Face Flange, Best Deals on Raised Face JIS B 2311 Flanges, Carbon Steel JIS B 2311 Flange, Stainless Steel JIS B 2311 Flange deaaler in India.

IS B 2311 / 2312 / 1213 Flange PRICE LIST

We provide wide variety of JIS B 2311 / 2312 / 1213 Flange that in compliance with IS, BS and DIN standards at pleasant marketplace costs in India. To realize more about the brand new rate of stainless-steel orifice Flanges Please contact on the given details below

JIS B 2311 / 2312 / 1213 FLANGES MATERIAL & GRADES

Stainless Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A182 F 304, 304L, 304H, 309, 310, 310S, 316, 316L, 317, 317L, 321, 321H, 347, 347H, 446, 904L

Carbon Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A105, ASTM A694 Gr. F42, 46, 52, 56, 60, 65, 70

Alloy Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A182, F1, F5, F9, F11, F22, F91

Duplex Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A182, F44, F45, F51, F53, F55, F60, F61

Super Duplex JIS B 2311 / 2312 / 1213 Flanges

ASTM A182, F44, F45, F51, F53,

High Nickel Alloy JIS B 2311 / 2312 / 1213 Flanges

ASTM B564, B160, B472, B162, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade 2 & 5), Cupro-Nickel 70/30, Cupro-Nickel 90/10.

Low Temperature Carbon Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A350, LF2, LF3F55, F60, F61

Address: 119/123, Dr mahimtura marg, 3rd khumbharwada lane, Mumbai -4

Open Hours:

Monday-Saturday ; 9am - 6pm Sunday holiday

Email:

info@ronakoverseas.in sales@ronakoverseas.in

[bullionpipestainlesssteel]

What are Flanges and their types?

Flanges are an essential component of any piping system, as they provide a secure and leak-free connection between two pipes or valves. As the leading Flanges manufacturers, suppliers, and exporters in India, Bullion Pipes & Tubes LLP understands the importance of choosing the right type of flange for your application. 

In this blog post, we will cover everything you need to know about flanges, including their types, materials, and applications.

  Before we dive into the details, let's start with the basics!

 Introduction 

Flanges are mechanical connectors used to join two pipes or valves. They are usually made of steel, and their main purpose is to provide a tight and leak-free seal between the two parts. Flanges come in various types and sizes, and choosing the right type of flange is essential for the safety and efficiency of your piping system.

Types of Flanges? 

Flanges come in several types, including weld neck, slip-on, socket weld, lap joint, threaded, and blind flanges. Each type has its unique characteristics and applications, and selecting the right one will depend on several factors, such as pressure ratings, temperature ratings, size, material compatibility, and cost.

 ●      Weld Neck Flanges

Weld neck flanges are the most common type of flange, known for their high durability and strength. They are welded to the pipe or valve, making them ideal for high-pressure and high-temperature applications.

 ●      Slip-On Flanges

Slip-on flanges are easy to install and remove, making them ideal for applications that require frequent maintenance. They slide over the pipe or valve and are then welded or bolted in place.

 ●      Socket Weld Flanges

Socket weld flanges are similar to slip-on flanges, but they are welded only on the outer side of the flange, leaving the inner side free of welding marks. They are ideal for smaller-sized pipes and low-pressure applications.

 ●      Lap Joint Flanges

Lap joint flanges are used when a piping system requires dismantling frequently. They are also ideal for applications that require easy access to the pipe or valve.

 ●      Threaded Flanges

Threaded flanges are designed to be screwed onto the pipe or valve, making them ideal for applications that require easy installation and removal. They are commonly used in low-pressure applications.

 ●      Blind Flanges

Blind flanges are used to seal the end of a pipe or valve. They are commonly used for pressure testing and maintenance purposes.

 Materials & Grades Available In Flanges with Bullion Pipes & Tubes LLP

 Flanges can be made of various materials & Grades, such as,

●      Stainless Steel - 904L Flanges, 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Flanges

●      Hastelloy Flanges - C22, B2 Flanges, C276 Flanges

●      Carbon Steel Flanges - ASTM A350 15LF1, LF2 CL1/CL2, LF3 CL1/CL2 Carbon Steel Flanges

●      Nickel Alloy - 200/201 

●      Duplex Steel Flanges - Duplex UNS S32205/31803 Flanges

●      Alloy Steel Flanges - P5, P9, P11, P12, P22, P91 Flanges 

●      Super Duplex Steel - UNS S32750/S32760 Flanges

●      Titanium Alloys - Gr 2 Flanges, Gr 5 Flanges, Gr 7 Flanges 

●      Aluminium Flanges - 5052 Reducing Flanges, 5082 Flanges, 5082 Flanges, 6063 SORF Flanges, 6082 Blind Flanges, 2024 Aluminum Weld Neck Flanges, and 5052 Threaded Flanges.

●      Tantalum Flanges - ASTM B521 Tantalum Flanges, Spectacle Blind Flanges, Orifice Flange, Ta-10W Flanges, Tantalum UNS R05200 Flanges, ASTM B365 Ta2.5W Flanges 

●      Monel Flanges - Monel K500 Flanges, Monel 400 Flanges 

●      Alloy 20 Flanges - Alloy 20 RTJ Flange, Alloy 20 WNRF Flanges, Alloy UNS N08020 Pipe Flanges, Alloy 20 Weld Neck Flange, Alloy 20 Nipo Flanges, ASTM B462 Alloy Threaded Flanges, Alloy 20 Spectacle Blind Flanges, Alloy 20 Industrial Flanges, and UNS N08020 Alloy 20 Forged Flanges

●      SMO 254 Flanges

●      Inconel Flanges - Inconel 718, 600, 601 and 625 Flanges

●      Incoloy Flanges - 825, 800/800H/800HT Flanges

Choosing the right material for your flange will depend on several factors, such as the application's temperature, pressure, and corrosion resistance requirements.

 Factors to Consider When Selecting Flanges

Selecting the right flange for your application can be challenging, as there are several factors to consider, such as pressure ratings, temperature ratings, size, material compatibility, and cost. At Bullion Pipes & Tubes LLP, we can help you choose the right flange for your application, ensuring safety and efficiency.

 Flange Standard Ratings

Flanges come in various standard ratings, such as ANSI, API, DIN, and JIS. These ratings determine the flange's pressure-temperature rating and its compatibility with other components in the piping system.

 Flange Installation

Proper flange installation is essential for the safety and efficiency of your piping system. It involves several steps, such as preparation of the piping system, installation of the flanges, flange tightening process, flange alignment, and testing and inspection.

 Maintenance and Repair of Flanges

Maintaining and repairing flanges is critical for the longevity and safety of your piping system. Regular inspections, leak checks, and maintenance can help detect any potential issues before they become a more significant problem.

 Applications of Flanges

Flanges have a wide range of applications in various industries, including: 

●      Oil and Gas Industry

●      Petrochemical Industry

●      Chemical Industry

●      Power Generation Industry

●      Water Treatment Industry

 They are used in various applications, including HVAC systems, plumbing, and firefighting systems.

 Why Choose Bullion Pipes & Tubes LLP for Flanges? 

As the leading Flanges manufacturers, suppliers, and exporters in India, Bullion Pipes & Tubes LLP offers a wide range of flanges made from high-quality materials. We provide customized solutions to meet our customers' specific needs, and our flanges are available in various sizes, ratings, and materials.

We have been providing high-quality flanges to various countries, such as Ukraine, Australia, Syria, Iraq, Iran, Kazakhstan, Russia, Brazil, Armenia, Azerbaijan, Egypt, South Africa, Qatar, Turkey, Oman, Bahrain, and Germany, and our products are known for their durability, reliability, and safety.

 Conclusion

Flanges are a critical component of any piping system, and selecting the right type of flange for your application is essential for safety and efficiency. Choosing a reliable and trustworthy supplier like Bullion Pipes & Tubes LLP can ensure that you get high-quality flanges that meet your specific requirements.

[alfazkjan51]

Titanium Sekrup dan bolt

jual titanium batangan: https://www.titanium.co.id

TITANIUM BATANGAN / BARS / RODS

Kami menjual Round Titanium Batangan produk sesuai ASTM B348/ASME SB348 tersedia di Grades 1, 2, 3, 4, Gr5 (Ti6AL4V) dan nilai titanium lainnya in round bars sizes up to 500 diameter, rectangular and square sizes are also available. Kami menyediakan AMS 4928, AMS 4911, AMS 2631, AMS 4901, AMS 4907, AMS 4919, AMS 6931, AMS T 9046, AMS T 9047, ASTM B 337, ASTM B 338, ASTM B 381, ASTM F 67, ASTM F 136, ASTM B 348, ASTM B265 dan pipa, fittings & flanges with NORSOK M630 Rev 2 MDS T01 specifications for North sea petroleum industry developments dan operations dengan sangat harga murah.

pipa titanium https://titanium.co.id/2016/09/15/titanium-tubes-pipes-fittings/

TUBE PIPA TITANIUM DAN SPECIAL METALS

Tabung Titanium, Pipa dan fiting tersedia dalam tipe Seamless maupun Welded, diproduksi dengan spesifikasi ASTM / ASME dalam berbagai ukuran. Flange types like weld-neck, slip-on, blind, lap joint, threaded and socket weld are available in ASME B16.5 specifications.  We supply titanium tubes to leading Oil & Gas industry fabricators to build heat exchangers, air-coolers and other process equipments. Depending upon the requirement of your projects we can supply with ASTM/ASME or NORSOK M630 specifications. For detailed information for Titanium Tubing, please contact your Special Metals Indonesia sales representative.

titanium batangan https://titanium.co.id/2016/09/15/titanium-bars-rods/

Grade 5, also known as Ti6Al4V, Ti-6Al-4V, Ti 6-4 or R56400 adalah paduan titanium yang paling umum digunakan. Ini memiliki komposisi kimia 6% aluminium, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium. Grade 5 is used extensively in Aerospace, Medical, Marine, and Chemical Processing. It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties. Among its many advantages, it is heat treatable. This grade has an excellent combination of strength, corrosion resistance, weld and fabricability. In consequence, its uses are numerous such as for military aircraft or turbines. It is also used in surgical implants. Generally, it is used in applications up to 400 degrees Celsius. Its properties are very similar to those of the 300 stainless steel series, especially 316. Ti-6Al-4V is a two phase alpha + beta grade of titanium and is the most widely used of all the titanium grades. USA membuat logam AMS4928 dan AMS4911 ada stok.

harga titanium batangan  https://www.titanium.co.id

PT Special Metals Indonesia adalah stokis terkemuka dan penyalur global untuk berbagai bahan titanium seperti Titanium Batang, Balok, Lempengan, Lembaran, Tabung pemindah panas, Pipa, Penyambung dan siku, Baut Titanium, Sekrup, Tabung Bersisik dan Inconel (pelapisan logam) kepada semua pelanggan baik dari industri dirgantara, otomotif, elektronik, presisi manufaktur, persenjataan, kelautan, galangan kapal, minyak & gas, sampai pembangkit tenaga listrik dan konstruksi.Kami menyediakan stok dan variasi yang luas dari titanium batangan, lempengan, balok dan gulungan atau yang ditempa datar. Bila anda membutuhkan produk titanium dalam bentuk khusus, kami menggunakan jasa mitra global kami yang akan menyediakan proses konversi secara independen seperti penempaan, penggulungan dan kurasi di suhu tinggi..

 jual plat titanium  https://titanium.co.id/2016/09/15/titanium-sheets-and-plates/

Kami menjual Plat Titanium / Lembar sesuai ASTM B265 / ASTM SB265 tersedia dalam gred CP dan Alloy. Ketebalan stok kami mulai dari 0,5mm hingga 100 mm. Plat Titanium tersedia dalam ukuran lebar dan panjang berdasarkan kebutuhan pelanggan, kami dapat memotong sesuai kebutuhan anda. Pelanggan hanya dapat membeli ukuran yang mereka butuhkan dan tidak seprei penuh. Kami menyediakan Lembar dan Pelat Titanium dengan harga yang sangat kompetitif dengan kualitas yang baik, dibuat oleh pabrik papan atas.

• Sheets 0.5 ~ 4.0 tk x <1000 Width x <3000 Length

• Plates 4.1 ~ 60.0 tk x <3000 Width x <4000 Length

Kami memasok titanium ke Jakarta, Surabaya, Bandung, Medan, Semarang, Bekasi, Tangerang, Depok, Palembang – Indonesia.

Hastelloy https://titanium.co.id/2016/09/26/nickel-alloys-inconel-monel-hastelloy-incoloy/

PT Special Metals Indonesia distributes high temperature, corrosion resistant grades of Nickel and Cobalt alloy metals. Materials are supplied in sheet, plate and bar forms. Our long standing relationship with the premier mills as well as US, Europe and Japan principals allows us fast deliveries for hard to find metals for the aerospace, petrochemical and electronic industries. Supplied in Annealed condition or Solution Treated & Aged-STA condition.

Inconel, Incoloy Flanges  https://titanium.co.id/2020/03/01/titanium-flange/

TITANIUM & NICKEL ALLOY FLANGE

PT Special Metals Indonesia supplies Titanium, Nickel Alloys and exotic metal flanges in sizes ranging from 1/2” to 24”. All flat face flanges are supplied with serrated spiral finish per ASME/ASTM B16.5

Alloy name, UNS Number and flange type are the three requirements for manufacture of flangesand  forged items to industry standards such as ASME B16.5 or non-standard dimensions.

These alloys are primarily selected for use in high temperature and/or corrosive environments.

Incoloy® alloys 800H and 800HT are utilized in high temperature services where resistance to creep and rupture is required.

Special Steel 316Ti, SS317L, 904L

904L is an austenitic stainless steel. In comparison to 316L, its molybdenum addition gives it superior resistance to localized attack (pitting and crevice corrosion) by chlorides and greater resistance reducing acids and in particular its copper addition gives it useful corrosion resistance to all concentrations of sulphuric acid. Its high alloying content also gives it greater resistance to chloride stress corrosion cracking, but it is still susceptible. Its low carbon content makes it resistant to sensitization by welding and which prevents intergranular corrosion https://titanium.co.id/2016/09/26/special_stainless_steel/

https://titanium.co.id/2016/09/26/special_stainless_steel/

Alloy 317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids. Due to its low carbon content, 317L also provides resistance to sensitization when welded and higher creep, stress to rupture, and tensile strength at elevated temperatures. It is non-magnetic in the annealed condition but may become slightly magnetic after welding.

Heat Exchanger Tubes - Seamless & Welded

https://titanium.co.id/2016/09/26/heat-exchanger-tubes-seamless-welded/

Special Metals Indonesia is a distributor of high quality seamless & welded tubing certified to SA-178 Grade A and SA-214. Specializing in boiler tubes, condenser tubes, heat exchanger tubes, ferrules, and boiler tube plugs. Our customers include mechanical contractors, original equipment manufacturers, fabricators, fertilizer plants, petro-chemical plants, Rayon mills, Paper and Pulp mills, utility power plants, Oil & Gas refineries and other distributors located throughout the South East Asia region. We highly specialize in supplying titanium Gr2 SMLS & welded tubes and special grade alloy materials.

Titanium Sekrup dan bolt

PT Special Metals Indonesia menyediakan beragam pengencang, seperti baut Titanium, mur hex, sekrup, kancing berulir, dan ring. Our titanium fasteners are available in a variety of sizes in stock, as well as additional sizes upon request. Titan Titanium products meet aerospace and industrial specificationsare available in commercially pure grade 2 as well as Grade 5 Ti6Al4V.

• Standards: All DIN specifications & ANSI B18.2.3.4M. • Size: M3 ~ M36 and All Inch sizes. • Ukuran / spesifikasi khusus dibuat sesuai kebutuhan pelanggan.

https://titanium.co.id/2016/09/26/titanium-screws-nuts-and-bolts/

[marcelforged]

Square Flanges Manufacturer

SPECIALIZED SQUARE FLANGES MANUFACTURER, SHAB, SSAB, KAB SQUARE FLANGE DIMENSIONS. Marcel Piping Projects Supply PVT LTD is one of the oldest manufacturers, stockists, suppliers, and exporters of Square Flanges in India. Square flanges are used in hydraulic systems to connect a pipe to component or a pipe to pipe connection. As the name implies, square flanges are squarely shaped. It makes in accordance to different standards based on various countries, square flanges come in different pressure rating in order to fulfill their purpose. A complete set of square flanges consist of the female flange (oring side), male flange (flat side), oring, and bolts. The female flange is identified as part A. The male flange is identified as part B. And the complete set is AB.

Square flange end connection is welding type and it is called socket weld or weld-in. The pipe has to insert in to the recessed area of the flange, or socketed so as to have a plain end. Other connections can be customized upon request. A complete set of square flange included 5 important parts. It is 1 piece of female side, label as A side, 1 piece of male side, label as B side, 4 pieces of hexagon or allen cap screws, 1 piece of NBR 70/90 oring and 4 pieces of hexagon nut (optional). Hexagon nuts are paired with hexagon bolts to use in tightening up both male and female sides.(350 KAB, 280 KAB, 210 SHAB, 210 SSAB).

We are ISO Certified Manufacturer and Stockist of Square Flanges in Stainless Steel, Carbon Steel, Mild Steel, Alloy Steel, Duplex Steel, Super Duplex Steel, Hastelloy, Monel, Copper Nickel, Inconel, Incoloy, Nickel Alloy, Alloy 20, 254 Smo, Titaniun, Bronze, Aluminium, Brass at Reasonable Price.

We are Leading Exporter and Supplier of JIS B2291 Square Flange, ANSI Aluminum Square Flange, DIN 3901/ ISO 8435 Square Flange, ISO 6164 Square Flange, Square Exhaust Flange, JIS 210k / JIS B2291 Square Flange, AWWA C207 Square Vacuum Flange, PN 250 PN 400 Square Flange, SHAB / SSAB / KAB / LSA / Blind Square Flange.

[metalforgeindia]

How to Select Monel 400 Flanges Right for Your Project? |Metalforgeindia

Monel 400 Flanges is a nickel-copper alloy noted for its splendid corrosion resistance in severa environments, which include seawater and chemical processing programs. When it entails deciding on Monel four hundred flanges in your project, several factors want to be considered to make sure the quality in your particular requirements. In this guide, we are able to discover the key concerns to help you make an informed selection whilst deciding on Monel 4 hundred flanges.

Understanding Monel four hundred Flanges:

Monel four hundred flanges are forged or machined additives designed to connect pipes, valves, and exceptional devices in piping systems. They are generally utilized in industries which include marine, oil and fuel, chemical processing, and aerospace, where resistance to corrosion, high temperatures, and cruel environments is crucial. Monel 400 flanges are to be had in diverse types, together with weld neck, slip-on, socket weld, blind, and lap joint flanges, each with its unique characteristics and applications.

Key Considerations for Selecting Monel four hundred Flanges:

1. Corrosion Resistance:

 Monel 400 is renowned for its remarkable corrosion resistance, in particular in marine and chemical environments. When selecting Monel 4 hundred flanges, it's essential to assess the corrosive situations they'll be exposed to and pick out the suitable kind of flange that gives the specified resistance to corrosion.

2. Operating Conditions:

Consider the running situations of your project, together with temperature, strain, and fluid characteristics. Monel 4 hundred flanges are suitable for excessive-temperature and excessive-stress applications, making them satisfactory for use in challenging environments in which unique substances may also fail.

3. Compatibility:

Ensure that the Monel four hundred flanges you select out are well suited with the piping device and other additives in your project. Check the specs and necessities to verify the size, material composition, and pressure ratings of the flanges to make sure compatibility with the present device.

4. Flange Type:

Select the correct sort of Monel four hundred flange primarily based at the specific requirements of your utility. Weld neck flanges offer a sturdy and leak-proof connection, slip-on flanges are easy to install and take away, socket weld flanges are appropriate for small-bore piping structures, and blind flanges are used to close the give up of a pipe or vessel.

5. Quality and Reliability:

Choose Monel 4 hundred flanges from authentic producers recognised for his or her pleasant and reliability. Ensure that the flanges meet enterprise standards and go through rigorous finding out to make sure compliance with specs and general performance requirements.

6. Cost Considerations:

While Monel 400 flanges offer superior standard overall performance and durability, they'll come at a better value in evaluation to flanges made from one-of-a-kind substances. Evaluate your finances and challenge requirements to decide the maximum fee-effective solution without compromising on superb and normal performance.

7. Supplier Reputation:

Select a trusted company with an established track document of handing over incredible Monel four hundred flanges and super customer service. Research supplier reviews, certifications, and enterprise enjoy to make certain you partner with a reliable and legitimate supplier.

Conclusion:

Choosing the proper Monel four hundred flanges for your task is important to ensure most effective average overall performance, reliability, and durability. By considering factors collectively with corrosion resistance, strolling situations, compatibility, flange type, top notch, value, and supplier reputation, you could make a knowledgeable choice and choose Monel four hundred flanges that meet your assignment necessities and exceed your expectancies. With their extremely good homes and versatility, Monel 400 flanges stay a preferred preference for worrying packages in numerous industries.

[merakistar]

Conoco Philips Approved Flanges Exporters in UAE

Meraki Star Metals Oil & Gas Equipment Trading L.L.C. is delighted to offer an extensive range of Monel Alloy 400 Flanges, meticulously crafted from premium-grade metal. These flanges, particularly the Monel 400 Slip on Flanges (UNS N04400), are renowned for their ability to be strengthened through cooling, making them indispensable components in various applications. To ensure optimal performance, welding techniques such as gas-tungsten arc welding, metal-inert gas welding, gas-metal-arc welding, and submerged-arc welding are recommended for use with these flanges. It is crucial to employ advanced machining equipment and tooling to minimize chatter or work hardening of the alloy in Monel 400 Weld Neck Flanges before cutting.

Distinguished by their exceptional resistance to corrosion from acids and alkalis, as well as their high mechanical strength and superior ductility, Monel 400 Blind Flanges exemplify durability and reliability. Moreover, our Monel 400 Lap Joint Flanges are available in various configurations to meet the specific requirements of our esteemed clients. By utilizing an advanced manufacturing process through Electro Slag Refining (ESR), Monel 400 Connection Weld Flanges ensure the highest quality and cleanliness standards, with the ESR process guaranteeing flawless production of Monel 400 Ring Joint Type Flanges.

Offering convenience without compromising performance, Monel 400 Spectacle Blind Flanges require no post-weld heat treatment. However, thorough cleaning after welding is imperative to ensure optimal corrosion resistance in Monel 400 Nippolet Flanges, as failure to do so may result in contamination and embrittlement.

Specifications for Monel 400 Pipe Flanges:

Specifications: ASTM B564 / ASME SB564

Size: 1/2"NB TO 60"NB

Standards: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Class / Pressure: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64, etc.

Standard: ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

[citizenflanges-blog]

Monel K500 Flanges Properties and Applications

Citizen Metals is a well-known exporting and manufacturing unit of Monel Alloy K500Flanges, which is also known for its ease of fabrication compared to other super-alloys, and the fact that it is essentially nonmagnetic even at low temperatures. Monel K500 Slip OnFlanges is precipitation - hardenable nickel - a copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. A useful characteristic of Monel K500 Blind Flanges is that it is virtually nonmagnetic, even at quite low temperatures. Monel K500 Spectacle Blind Flanges has approximately three times the yield strength and double the tensile strength when compared with 400.

Monel K500 Flanges Application Industries

 Chemical Plants

 Fertilizers Plants

 Petrochemicals Industrial

 Textile Machineries

 Industrial Machineries

 Paper Industries

[chhajed9000]

Blind Flanges Manufacturers

These level face steel blind flanges are utilized to clear off pipelines, valves and pumps, it can likewise be utilized as a review spread. Blind flanges is some of the time alluded to as a blanking flanges. Experienced experts are engaged with us who fabricate these flanges with great accuracy. We are recognized blind flanges manufacturer.

SPECIFICATION

Standards:

ANSI B 16.5 Class 150

ANSI B 16.5 Class 300

ANSI B 16.5 Class 600

ANSI B 16.5 Class 900

ANSI B 16.5 Class 1500

ANSI B 16.5 Class 2500

Stainless Steel :

ASTM A 182, A 240

Grade:

F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel:

ASTM A 105, ASTM A 181

Alloy Steel:

ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys:

Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys:

Copper, Brass & Gunmetal

Size:

1/8" NB TO 48"NB.

Class:

150#, 300#,400 #,600#,900#, 1500# & 2500 #.

ANSI:

ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

DIN:

DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

B.S:

BS4504 , BS4504, BS1560, BS10

For More Information: Visit our website-https://chhajedpipefittings.com/blind-flanges-manufacturers-suppliers-exporters-stockists.html Call Us: +91 98215 13630 / 93211 13630 E-mail: info@chhajedsteel.com

[flangesnuts]



 Hig Hub Flange

What is a high Hub blind flange?

high hub flange is a kind of round plate with no center hold but with all the proper bolt holes. It is used to close ends of piping systems. It is available in various sizes and materials and is used to provide positive closer on the ends of pipes, valves or equipment nozzles.

Material & Grades of High Hub Flanges :

Stainless Steel High Hub Flanges : ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L High Hub Flanges

Duplex & Super Duplex Steel High Hub Flanges : ASTM A182 / ASME SA182 F44, F 45, F51, F 53, F 55, F 60, F 61 High Hub Flanges

Carbon Steel High Hub Flanges : ASTM A105 / ASME SA105 ASTM / ASME A 350 , ASTM A181 LF2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706 High Hub Flanges

Low Temperature Carbon Steel High Hub Flange: ASTM A350, LF2, LF3 High Hub Flanges

Alloy Steel High Hub Flanges : ASTM A182 / ASME SA182 & A387 F1, F5, F9, F11, F12, F22, F91 High Hub Flanges

Copper Alloy Steel High Hub Flanges : ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200

Nickel Alloy High Hub Flanges : ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020) High Hub Flanges

Application of High Hub Flange

ANSI B16.5 Class 150 High Hub Flanges uses in Industrial Boilers Industry

ASTM A182 Stainless Steel High Hub Flanges uses in Power Plants Industry

ASME B16.47 Series A and B High Hub Flanges uses in Nuclear Plants Industry

Stainless Steel High Hub Flanges uses in Oil & Gas Industry

Super Duplex Steel High Hub Flanges uses in Refineries Industry

Industrial High Hub Flanges uses in Ship Building Industry

Super Duplex Steel High Hub Flange Forged Flanges uses in Heat Exchanger Industry

Carbon Steel Industrial High Hub Flanges uses in Condensers Industry

Alloy Steel Industrial High Hub Flanges uses in Paper & Pulp Industry

Duplex Steel Industrial High Hub Flanges uses in Marine Applications

Stainless Steel Industrial High Hub Flanges uses in Nuclear Power Industry

Industrial High Hub Flange / Fittings System uses in Fossil Fuel Power Plants Industry

About Flanges And Nuts

Flanges nuts Is An ISO 9001:2015 licensed enterprise And Has A song file Of providing A wide variety Of Piping solution At Very competitive prices. In a totally brief time period, we've gained An tremendous national And international popularity.

Headed through Mr. Ronak Bhansali (Director) And Supported by way of Our committed, expert team, we are able to fulfill The needs Of Our customers In A timely And Systematic manner. The Profound know-how And wealthy experience Of our crew within the Respective arena Of metal merchandise Has Assisted The business enterprise To gather outstanding role Amidst The reliable chrome steel, Pipe fitting In India.

we're Counted most of the nice manufacturer, Exporter Stockist & provider. We Export 60% Of Our range Of Flanges, shops, Pipe Fittings And solid Fittings To many nations Like u.s.a., united kingdom, Italy, Malaysia, Gulf and so on. we'd admire To Get Your Esteemed Enquires And look ahead to The delight Receiving Your precious response. we're often supplying these objects To Many main industrial gadgets inclusive of : ship constructing, Petrochemical flora, metallic flowers, Refineries, chemical substances, Fertilizers, electricity Plant, Pharmaceutical, Ports, Oil & gas, Railway, Mining, Cement vegetation, Paper mills, Sugar generators, Fabrication units and so on.

TO KNOW MORE ABOUT OUR PRODUCTS YOU CAN VISIT OUR WESITE 

www.flangesnuts.com

 Used in different industries by  

 Refineries Gas Processing Off-Shore Oil Drilling Companies Petrochemicals Hydro-Carbon Fertilizers Paper & Pulp Companies Power Generation Specialty Chemicals Pharmaceuticals Drugs Steel Cement Water Pipe Line Pesticides General Piping Construction Engineering Nuclear Food Processing & Dairy boiler & heatexchangers 

[radicalsteel]

Our range of Flanges has carved a niche in the entire market, owing to its unmatchable features. It is highly reliable & durable as well as has accurate dimensions and robust design. The range of forged flanges has the below mentioned features: * Size : ½" to 12" * Type: SORF, WNRF, BLRF * Pressure: 150 Lbs, 300 Lbs, 600 Lbs * Design Standard: ASTM B16.5 * Material standard: ASTM A105

Flanges Types:

• BLRF - Blind Flange     • Reducing Flange

• Lapped Joint Flange     • Plate Flanges

• Customised Flanges

• WNRF - Weld Neck Flange

• Forged Flanges  • SWRF - Socket Weld Raise Face Flanges

• Long Neck Weld   Flange  • Orifice Flange

• Screwed or Threaded Flange  • SORF-Slip on Flange

  • Spectacle Flange

Size : 1/2"NB TO 60"NB IN Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.

Specifications As Per The International Standard ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

Materials :

 Nickel Alloy Forged Flanges :

Standard:

• ASTM / ASME SB 564 / 160 / 472

• UNS 10276 (HASTELLOY C 276 Forged Flanges)

• UNS 2200 (NICKEL 200 Forged Flanges)

• UNS 2201 (NICKEL 201 Forged Flanges)

• UNS 4400 (MONEL 400 Forged Flanges)

• UNS 8020 (ALLOY 20 Forged Flanges)

• UNS 8825 INCONEL 825 Forged Flanges)

• UNS 6600 (INCONEL 600 Forged Flanges)

• UNS 6601 (INCONEL 601 Forged Flanges)

• UNS 6625 (INCONEL 625 Forged Flanges)

Copper Alloy Forged Flanges : ASTM / ASME SB 61 / 62 / 151 / 152. C 70600 (CU -NI- 90/10) - Cupro Nickel Forged Flanges C 71500 (CU -NI- 70/30) - Copper Nickel Forged Flanges UNS NO. C 92200, UNS NO. C 83600, UNS NO. UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200 Duplex Steel Forged Flanges: ASTM / ASME A/SA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61. Stainless Steel Forged Flanges - SS Forged Flanges: ASTM A182 Grade : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. Alloy Steel Forged Flanges - AS Forged Flanges : ASTM SA 182 F1/F5/F9/F11/F22/F91

[steelflanges-blog]

JIS B2220 SUS304 SOP Flange FF 2-1/2 Inch 5K

FOB Price USD 1 - 1,900/Piece

Port Ningbo or Shanghai Port

MOQ 1 Piece

Supply Ability 1000 Pieces Per Day

Payment Terms L/C,T/T,Western Union,MoneyGram

Packaging Seaworthy plywood cases or pallets

Delivery 2 - 10 days

Quick Details

Material: SUS304, etc

Size: 2-1/2" (DN65)

Type: SUS304 SOP Flange Place of Origin: Zhejiang, China (Mainland)

Connection: Welding

Brand Name: Yaang Standard: JIS B2220

Shape: Round

Standard or Nonstandard: Standard Technics: Forged

Packaging & Delivery

Packaging Details:Seaworthy plywood case or as customer requests Delivery Detail:2 - 10 days after receiving the deposit

Specifications

4. Pressure: 5K (5kg/cm2)

There are two types of JIS B2220 slip on flange products,which can distinguish from the products’ neck.The JIS B2220 slip on plate flange(JIS B2220 SOP Flange) just looks like the plate flange,the JIS B2220 slip on hubbed flange(JIS B2220 SOH flange) have a neck.

China Slip On Plate Flange Manufacturer yaang supplies JIS B2220 SUS304 SOP Flange FF, 2-1/2 Inch, 5K.

Chemical Composition and Mechanical Property for 304/304L

Steel Grade

Chemical Composition

Mechanical Performance

C(Max)

Si(Max)

Mn(Max)

P(Max)

S(Max)

Ni

Cr

N

Mo

Tensile Strength (Min)

Yield Strength (Min)

Mpa

Mpa

304

0.08

0.75

2.00

0.045

0.03

8.0–10.5

18.0–20.0

0.1

/

515

205

304L

0.03

0.75

2.00

0.045

0.03

8.0–12.0

18.0–20.0

0.1

/

485

170

Type

SUS304 Slip On Plate Flange FF

Size

1/2" to 80"

Standards

SO, WN, SW, TH, LJ, BL, PL, etc

Material

Carbon Steel Plate Flanges: ASTM A105/A105N, etc

Stainless Steel Plate Flanges: ASTM A182 F304/304L/304H, F316/316L, F310, F321, F904L, etc

Alloy Steel Plate Flanges: ASTM A182 F1, F5, F9, F11, F22, F91, etc

Nickel Alloys Plate Flanges: Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II).

Duplex, Super Duplex Plate Flanges: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61, 2205 (UNS No. S31803), 2507 (UNS No.S32750), etc

Copper Alloy Plate Flanges: UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C71500 (Cu -Ni- 70/30), etc

Surface treatment

Applications

Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc

JIS 5K

LTB

DRILLING DATA

JIS 5K

NOMINAL PIPE SIZE

OUTSIDE DIAMETER OF FLANGE

THICKNESS OF FLANGE

THINKNESS BLIND

BOSSES LENGTH SOH,SWLJ

WELD NECK LENGTH

PITCH CIRCLE DIAMETER

NUMBER OF BOLT HOLES

BOLT HOLE DIAMETER

NOMINAL PIPE SIZE

MM

INCH

C

T

T1

L

L1

PCD

#

H

MM

INCH

10

3/8

75

9

9

13

24

55

4

12

10

3/8

15

1/2

80

9

9

13

25

60

4

12

15

1/2

20

3/4

85

10

10

15

28

65

4

12

20

3/4

25

1

95

10

10

17

30

75

4

12

25

1

32

1 1/4

115

12

12

19

33

90

4

15

32

1 1/4

40

1 1/2

120

12

12

20

34

95

4

15

40

1 1/2

50

2

130

14

14

24

36

105

4

15

50

2

65

2 1/2

155

14

14

27

39

130

4

15

65

2 1/2

80

3

180

14

14

30

41

145

4

19

80

3

90

3 1/2

190

14

14

41

155

4

19

90

3 1/2

100

4

200

16

16

36

41

165

8

19

100

4

125

5

235

16

16

40

43

200

8

19

125

5

150

6

265

18

18

40

49

230

8

19

150

6

175

7

300

18

18

N/A

49

260

8

23

175

7

200

8

320

20

20

N/A

53

280

8

23

200

8

225

9

345

20

20

N/A

54

305

12

23

225

9

250

10

385

22

22

N/A

61

345

12

23

250

10

300

12

430

22

22

N/A

62

390

12

23

300

12

350

14

480

24

24

N/A

73

435

12

25

350

14

400

16

540

24

24

N/A

76

495

16

25

400

16

450

18

605

24

24

40

79

555

16

25

450

18

500

20

655

24

24

40

79

605

20

25

500

20

550

22

720

26

26

42

81

665

20

27

550

22

600

24

770

26

26

44

81

715

20

27

600

24

650

26

825

26

28

48

85

770

24

27

650

26

700

28

875

26

30

48

94

820

24

27

700

28

750

30

945

28

32

52

100

880

24

33

750

30

800

32

995

28

34

52

100

930

24

33

800

32

850

34

1045

28

36

54

108

980

24

33

850

34

900

36

1095

30

36

56

108

1030

24

33

900

36

1000

40

1195

32

40

60

116

1130

28

33

1000

40

APPLICATIONS:                  

1. Petrochemical industry

2. Pharmaceutical industry

3. Food industry

4. Aviation and aerospace industry

5. Architectural decoration industry

6. Oil and gas industry

Other Features:

1) Chemical and Physical characteristic: durable, corrosion resistant and high-temperature resistant

2) We also produce flange with special specifications according to customers’ requirements;

JIS B2220 SUS304 SORF Flange's Packing & Shipping

1) Packing Method:

Normal packing: plastic film or bubble paper wrapped on product's surface ,protect ends with                                           caps , pack with wooden case or load on fumifation plywood pallet .

Custom made as customers request.

2) Shipping Way:

Usually by Sea, By Air, By Train or River-and-Sea Coordinated Transport.

As per customer's request.

Where can we find the high quality JIS B2220 SUS304 SOP Flange FF, 2-1/2 Inch, 5K.

You can visit this website: www.yaang.com (Yaang Pipe Industry Co., Limited is a China Plate Flange Manufacturer).

If any inquiry about products, please feel free to contact us sales@yaang.com

Related products:

More>>

ASME B16.47 Series B Class 75 Weld Neck Flanges

EN1092-1/01/B1 304L Plate Flange RF DN250 PN16

ASME B16.5 A182 F904L WNRF Flange DN80 SCH10S CL150

ASME B16.5 A182 F304 SORF Flange 2-1/2 Inch CL15