#Model 12A

[nocternalrandomness]

Roxanne Fumero posing with a 1938 Lockheed Electra photographed by Steve Vonlanthen

[usafphantom2]

Here’s why the SR-71 Blackbird SR-1 Ejection Seat had two loops on the D ring

SR-71 Blackbird

SR-1 Ejection Seat

Two loops on the D ring

SR-71 Blackbird

The SR-71, unofficially known as the “Blackbird,” was a long-range, Mach 3+, strategic reconnaissance aircraft developed from the Lockheed A-12 and YF-12A aircraft.

The first flight of an SR-71 took place on Dec. 22, 1964, and the first SR-71 to enter service was delivered to the 4200th (later 9th) Strategic Reconnaissance Wing at Beale Air Force Base, Calif., in January 1966.

The Blackbird was in a different category from anything that had come before. “Everything had to be invented. Everything,” Skunk Works legendary aircraft designer Kelly Johnson recalled in an interesting article appeared on Lockheed Martin website.

For instance, the Blackbird’s ejection seat (in the form of the Lockheed SR-1 ejection seat) had two loops on the D ring.

Why is that?

SR-1 Ejection Seat

The SR-1 ejection seat is a Lockheed design not much different from the Stanley designed Lockheed C-2 used in the very early A-12 and SR-71 Blackbirds (as can be seen in the cockpit of A-12 06925).

This print is available in multiple sizes from AircraftProfilePrints.com – CLICK HERE TO GET YOURS. SR-71A Blackbird 61-7972 “Skunkworks”

According to The Ejection Site, the D-ring at the front center of the SR-1 ejection seat is cable connected to an initiator under the seat pan.

The cable is spring-mounted to prevent injuries after ejection and before seat separation at which time the cable is severed. When pulled, the initiator gas is routed to the inertia reels to retract the crewman back upright. It is also routed to the foot restraint reels and via a quick disconnect fitting to the canopy removal system.

As the canopy is jettisoned, an initiator in the canopy system is actuated and gas from it is directed back into the seat via another quick disconnect to actuate the gas-operated sequencing system, and to fire the catapult after a 0.3-second delay to allow the canopy to clear the area.

Two loops on the D ring

SR-71 pilot Darryl Greenamyer was as short as Bob Gilliland (another Blackbird driver) was tall. They were both examples of above and under-the-average test pilots hired by Lockheed Skunk Works.

This model is available from AirModels – CLICK HERE TO GET YOURS.

As told by Donn A. Byrnes and Kenneth D. Hurley in their book Blackbird Rising: Birth of an Aviation Legend, when Darrell was placed in the cockpit and the depressurized simulated (this was done by pumping up his pressure suit to 3.5 psi over atmospheric pressure) ���

His suit became so rigid that he could not reach the ejection seat loop mounted on the seat between his knees (The D ring) so they made it fit. The result was a second loop that raised above the initial loop.

As seen in the picture below.

Be sure to check out Linda Sheffield Miller (Col Richard (Butch) Sheffield’s daughter, Col. Sheffield was an SR-71 Reconnaissance Systems Officer) Twitter X Page Habubrats SR-71, Instagram Page SR71Habubrats and Facebook Page Born into the Wilde Blue Yonder Habubrats for awesome Blackbird’s photos and stories.

Photo credit: Tony Landis, Richard Graham via The Ejection Site and U.S. Air Force

SR-71 Blackbird

Previous « JMSDF, US Navy increase cooperation between UP-3D and EA-18G electronic attack aircraft as EP-3 era ends

@Habubrats71 via X

[wheelsgoroundincircles]

Rockwell XFV-12A

Rockwell XFV-12A

by Alex Stoll

Around 1970 the Navy could not see how it was going to be able to replace its old Essex and Midway carriers with Nimitz-class supercarriers. Admiral Elmo Zumwalt directed a study of alternatives which resulted in the Sea Control Ship (SCS), a mini-carrier equipped with V/STOL fighters and ASW aircraft. The USN invited manufactures to propose demonstration programs for a new aircraft, called the V/STOL Fighter Technology Prototype, to replace the outdated Harrier and serve on the SCS or other ships much smaller than conventional carriers: BAe and MD proposed an improved Harrier and a supersonic Harrier with a PCB (Plenum-Chamber Burning) engine; Boeing and Northrop proposed jet-powered tail-sitters; Lockheed-California proposed a propeller-driven tail-sitter; and Rockwell proposed a canard-delta aircraft powered by a large and enormously powerful engine that used the ejector-lift system for V/STOL. The Navy awarded the contract to Rockwell in 1972, instead of choosing designs based on proved technology, and the XFV-12A designation (twelth in the V series, not in the F series; the F-12 was the interceptor verison of the Blackbird) was allotted. Even though the forward fuselage and landing gear of the A-4 and the wing box, air intakes, and fuel tanks of the F-4 were used to speed the program up, it still ran far behind schedule. The prototype was rolled out in December 1976 and the first flight was scheduled for 1979.

Engine Configuration For takeoff and landing, the entire engine was ducted to hollow-section "ejector flaps" (also called augmentor flaps) out along the wings and the canard by pilot command via a diverter valve box. The high-energy hot gas forced fresh air from above through the ejector flaps at a ratio of 7.5:1 to boost thrust by 70 percent. The ejector flaps could be raised or lowered to provide a smooth transition from vertical to horizontal flight or vice versa. After the XFV-12A's cancellation, de Havilland Canada designed an aircraft with ejectors build into the roots of a delta wing. GD incorporated their concept into the E-7, a F-16-based delta-winged STOVL aircraft. DHC built a large powered model and tested it in 1987. The EL system was large and control was difficult as a result of the large air mass moving through the wing root during transition, and nothing came of it (though not because the EL couldn't produce enough thrust as in the XFV-12A's case) despite the attractive low exhaust velocity.

Cancellation Rockwell and Pratt & Whitney experienced several major technical problems, and the thrust boost from the ejector flap system was never as large in the full-scale aircraft as predicted from data collected by test rigs and sub-scale models; the XFV-12A could not leave the ground. Eventually funding dried up, the SCS was canceled, and the program proved a disappointment; however, in most future ASTOVL programs, large-scale powered models were used because of the experience gained in the XFV-12A program.

[osrphotography]

ZK-AMU [Beechcraft D17S Staggerwing] at Ardmore, 2006.

msn 203 was constructed new for the Canadian Department Controller of Civil Aviation of Ottawa in 1938 and was given the c/r CF-CCA.

From 1955-56, it was with Bradley Air Services and Spartan Air Service Ltd and by 1957 was in private ownership.

In 1985, after a long period of inactivity, it flew for the first time since 1958, and owing to the lapsed c/r was given a new one: C-FCCA.

It is believed to have then been carefully stored at Leeward Ranch, FL from 1991-95.

In 1995, it was sold to Aotearoa and became ZK-AMU. Sadly it didn't spend much time here and in 2007 it was exported to Australia.

In 2022 however it and VH-HID [Lockheed Model 12A Electra Junior] were purchased as part of a swap for P-51D 44-13016 / A68-674. As a result, AMU + HID are now safely hangared at Wānaka. With AMU regaining her identity on 18/07/22.

[abookishdreamer]

Character Intro: Lykos (Kingdom of Ichor)

Nicknames- Moonling by Lycana

Babe by Urso

Sweetie by Arktos

Age- 19 (immortal)

Location- Lunar district, New Olympus

Personality- A true lone wolf she's confident, self-aware, free-spirited, & above all loyal to those that matter to her. She's also quite scrappy, resourceful, and stubborn- a non-believer when it comes to second chances. She's in a relationship.

She has the standard abilities of a goddess. As the goddess of wolves her other powers/abilities include limited lunakinesis, night vision, acclerated healing, being able to emit a sonic wolf's howl from her vocal chords, enhanced hearing & smell, adopting wolf physiology into her physical form, being able to shapeshift into a wolf, and being able to communicate with other canines.

Lykos lives on the top floor of The Dianos Building, a luxury high rise apartment building in the Lunar neighborhood of New Olympus. Her apartment is 12A. Inside, the interior design is very cool & hip with the color scheme being silver, black, ivory, and dark blue. The flooring is black mink carpeting and there's also leather & velvet furniture, moonstone and obsidian furniture pieces, and various decorative wolf fur pelts on the walls. She has two pets- twin boy siberian huskies named Romulus & Remus.

She has a couple of canine tendencies like growling when she's angry or frustrated and shaking water out of her hair.

A member of Lykos' immediate family is her mother Lycana (Titaness of lycanthropy).

She starts out her mornings by walking her dogs through Eaglepoint Park. Her own personal form of exercise is running through the Nightfall Forest & Celestial Woods in her wolf form.

Lykos and her mother have a very close relationship. They talk & text daily and they see each other all the time. When they hang out (especially during a full or new moon), they love running through the city on the rooftops of buildings in their wolf forms. They'll also enjoy a shopping trip or an olympian sized cup of chocolate crunch ice cream at The Frozen Spoon. When Lycana visits her at her apartment, Lykos loves when she brings over her delicious homemade chorizo & arepas.

A go-to drink for her is vanilla cola. She also likes beer, ginger ale, pomegranate juice, lavender tea, cookies n' cream milkshakes from The Frozen Spoon, manhattans, rum & cokes, and her mom's limonada de coco. Usuals from The Roasted Bean is an olympian sized iced tea & a large iced cinnamon latte (topped with extra cinnamon).

A favorite piece of jewelry that she always wears is a yellow gold necklace that has a full moon charm- gifted by her mom.

A typical breakfast for her is a BIG bowl of Golly Grains cinnamon crunchies cereal. She also likes going to The Hearthside Diner for a plate of hash browns, bacon, and two steak & egg breakfast burritos- with extra salsa & peppers.

Much like Lycana, Lykos hates silver jewelry and is allergic to wolfsbane.

Her other favorite ice cream flavor is cookies n' cream.

She always naps and sleeps with the wolf plushie Urso won for her during their date at the LunarWorld theme park.

Lykos is fluent in Latin.

The spicy BBQ rib sandwich is her favorite thing to get from The Bread Box.

Her favorite nail polish color to wear from Olmorfia is "Blackout."

In the pantheon, she's known for her delicious birria tacos!

Lykos is outspoken concerning many social issues including illegal underground dog fighting, humane fur farms, and illegal hunting.

With makeup she loves using eyeshadow, the Ourania eyelash curler, liquid eyeliner, & matte lipstick.

Lykos' primary source of income comes from modeling for/endorsing Hot Intoxication, Nocturnal Vibez, and La Petit Amour.

In the pantheon she's friends with Artemis (goddess of the hunt & moon), Pasithea (goddess of hallucinations & relaxation), Aphrodite (goddess of love & beauty), Lyssa (goddess of rage & frenzy), Hecate (goddess of magic & witchcraft), Urania (muse of astronomy), Alala (goddess of the war cry), Dionysus (god of wine), Apollo (god of the sun, music, poetry, healing, medicine, archery, plague, light, & knowledge), Britomartis (goddess of mountains, hunting, & fishing nets), Methe (goddess of drunkenness), and Mania (goddess of insanity).

She also respects & admires her boyfriend's mom Arktos (goddess of the night sky & constellations).

Lykos doesn't like Ailuros (goddess of cats & warfare) or her mom's boyfriend Pseudologos (god of lies). She met him very briefly once when she came by her mom's apartment.

She likes playing basketball with Apollo & Artemis. Afterwards, they all go for a run in their wolf forms.

Some of her guilty pleasures include meat lover's pizza, beef jerky, spicy tuna rolls, spicy birria tacos, as well as an order of olympian sized cajun fries with 20 chicken nuggets (with spicy buffalo dipping sauce) from Olympic Chef.

Lykos is in a relationship with her boyfriend Urso (god of bears). They met two summers ago at the Summer Solstice Music Festival & their first date was a hunting/canoeing excursion in the state of Arcadia. She enjoys their deep conversations, his cuddles, his eyes, and his breathtaking kisses. Lykos fondly remembers when they first made love- underneath the New Olympus sign after watching the sunset while drinking beers.

She went to the Underworld once where she went skiing with Mania and Hecate.

Lykos & Lyssa schedule playdates for their dogs!

Aphrodite released a limited edition handbag for her fashion brand inspired by Lykos- an ethically sourced wolf fur bag, with the fur being dyed rose gold.

In her free time Lykos enjoys archery, hunting, basketball, hiking, mixed martial arts, reading (is a fan of mystery & suspense novels), going to the cinema, dancing, watching TV, and playing video games.

Her all time favorite meal is her mom's arroz atollado.

"If you live among wolves, you have to act like a wolf."

[btcminin]

Portable Electric Vehicle Chargers Explained

Over the past years we’ve learned to embrace the “plug” – that way your devices can stay charging all the time.

So it’s no wonder that we now see the electric vehicle charger, now commonly referred to as a fast charger, as one of the accessories you’ll want in your car.

If you’re interested in becoming a fully electric driver, it might also interest you to know the charging system in your car will work with other electric vehicles, and some can charge at a higher rate (up to 30kW, for instance) than your local 100-150 Watts station.

So what kind of charger is best for you, if any?

How long does it take to charge?

What is the difference between a station and fast charger?

Let’s take a look at the answers to these questions in this post.

What’s in your car’s charging port?

While many new vehicles have been sold without a charging port, these days there is a standardised port you should be able to expect in your new vehicle – 12-14v DC, 10-12A (12-14A according to some older models).

Some older vehicles may have different charging ports, or even no charging port at all.

If you find yourself in that position, then it’s definitely worth checking your owners’ manual for more information.

Which chargers do you have?

Most fast chargers are a separate device from the vehicle, the charger is plugged into the vehicle and the vehicle plugs into the charger.

So you’ll need to have these devices available – a power outlet, a fast charger and your vehicle.

However, some fast chargers are built into the vehicle (the Chevrolet Volt and plug in Prius have built-in fast chargers, for example), so you don’t need a separate device.

If you’re unsure, be sure to check if your fast charger is built-in before you buy it.

Can I use the fast charger on any vehicle?

Well, yes, you can use a fast charger with any vehicle if the charging port is the same – though there’s no reason to ever have a charger for a different vehicle.

There have been some issues with incompatibility with fast chargers from different gocharge.tech manufacturers and vehicles, however.

Some can charge most vehicles up to 50%, but no faster than that.

If your fast charger comes with a manual, you can also check which vehicles the charger is designed to work with.

If the fast charger has a display, you can also check which vehicles the charger is designed to work with.

However, it’s still a good idea to make sure your car works with it before you buy.

How do you know if a fast charger is faster?

There’s a couple of ways to work this out.

The first, and easiest is to plug a phone charger into the charger and then plug your phone into the phone charger.

The charging speed of the phone is the same as the charger, and so is the time to 100% charge.

If the phone is completely charged, then it’s a slow charger.

If you want to be slightly more scientific, look at the amount of watts needed to charge your vehicle.

This is not an exact science, and the range of voltages and amps is a bit wide.

A charger with a higher wattage can recharge your vehicle faster.

However, it’s not an exact science, and most fast chargers on the market are over 10kW.

A fast charger can give you better than 4-5 times quicker charging than a station, but as long as the fast charger is not over 10kW, then it’s probably faster.

How long does it take to charge a vehicle on a fast charger?

With a fast charger, there is no “speed limit” – so you’re not limited to a particular amount of time (though we’re told it’s between five and 10 minutes).

As long as your vehicle is charging, the time will decrease.

It will be shorter if your vehicle has full range and high power, but it will take a longer time if your battery is not fully charged, or if it is low on power (if it can only use 5kW).

When you plug your vehicle in, it should have a little indicator showing the power level and the time remaining.

[magz]

ID: The front and back of a pastel yellow guitar. The Yamaha SG 12AS guitar model from the year 1996. End ID.

1996 Yamaha SG 12AS

[wigslacefront]

From the brand IG@irisqueenhumanhair_ Tiktok@irisqueenhair_amazon DATE WEDDING FITNESS PARTY Product Dimensions ‏ : ‎ 20 x 7 x 3.4 inches; 11.36 ounces Item model number ‏ : ‎ SUVELAM Manufacturer ‏ : ‎ iris queen ASIN ‏ : ‎ B09TD8T9FB Country of Origin ‏ : ‎ China 【Premium Hair Material】12A 100% Unprocessed Brazilian Virgin HD […] The post Iris Queen 13×4 HD Straight Lace Front Wigs Human Hair Pre Plucked 12A 180 Density Brazilian Transparent Lace Frontal Wig for Black Women with Baby Hair Natural Black Color (20 inch) appeared first on Lace Front Wigs.

[howzitsa]

GIZZU 296Wh Portable Power Station 1 x 3 Prong SA Plug Point The Gizzu Portable Power Station offers power on the go in a compact design. This portable power station is ideal for emergency needs, power outages, camping trips, or whatever else electricity is needed as it allows you to power up small appliances. With three USB ports and a PD port, you can keep your phone, tablet, notebook, and camera charged. Thanks to the 230V South African plug, two DC ports, and one 12V auxiliary power outlet, you can power your mini-fridge, internet router, lightbulbs, and other small electronics and appliances with ease. This rechargeable battery-powered model features a robust design, and built-in LED flashlight and has three methods of charging, including car charging, solar power charging, and traditional wall charging. When using a third-party solar panel, the voltage range needs to be between 11V – 30V with a maximum amperage of 3.3A. Get off the grid and enjoy the great outdoors while keeping your essential gear powered & charged. With four USB ports including one USB 3.0 Quick Charge port and a PD port, this household essential is ideal in the event of a power outage or load-shedding allowing you to power up devices such as your router, TV, notebook, and other small appliances. Please note: Ensure the total power consumption for all connected appliances is less than 300W prior to connecting the device to the AC port. If the power requirement draw exceeds 300W, the device will shut down and this may cause damage. The device is recommended to be used as a Power Station; not as an always-on, pass-through solution. It is not recommended to use the device while charging or to leave it constantly plugged into the mains, as this can cause battery to degrade. FEATURES: 296Wh 300W Power Output Lithium-Ion Battery Technology LED Flashlight Powers Various Small Appliances and Devices Portable Wherever and Whenever You Need It Ideal Power Solution for Power Outages Supports Solar Charging (Solar Panels sold separately) Rugged Design SPECIFICATIONS: Battery Capacity: 80000mAh / 296Wh Lithium-Ion Inverter: Pure Sine Wave PD Input/Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A USB QC 3.0 Output: 5V/3A, 9V/2A, 12V/1.5A USB Output 2/3: 5V/3.1A (Single Port 2.4A Max) DC Output: 12V/12A (Single Port 10A Max) AC Output: 230V/50Hz/300W (Single Port) Lifespan: 1000 Charging Cycles Dimensions: 23 x 20.3 x 14 cm Weight: 3400g CHARGING TIMES: AC Adapter: 18V/3A (6.5hrs) DC Car Charger: 12V (9.5hrs) DC Solar Panel: 60W (6.5hrs) PD Port: 45W (7.5hrs) AC Adapter + PD Port: 18V/3A + 45W (3.5hrs) ESTIMATED RECHARGES (SINGLE DEVICE CONNECTED): Smart Phone (3500mAh): 23 Tablet (7000mAh): 11 Portable Speaker (7500mAh): 10 Action Camera (1250mAh): 64 Head Lamp (2200mAh): 36 ESTIMATED RUN TIME (SINGLE DEVICE CONNECTED): Laptop (50W): 6 hrs Lightbulb (11W): 27 hrs Internet Router (12W): 25 hrs 42″ LED TV (100W): 3 hrs Portable Fridge (100W): 3 hrs PROTECTION FEATURES: Short-Circuit Protection Over-Current Protection Over-Voltage Protection Under-Voltage Protection Over-Load Protection Temperature Protection WHAT’S IN THE BOX: Gizzu 296Wh Portable Power Station x1 AC Adapter x1 12V Car Charger Cable x1 2-in-1USB Charging Cable x1 Accessory Storage Pouch x1 User Manual x1

[cablereels]

Japan 2 pin plug power cord JL-8

Model: JL-8 Exterior Color: Black, white or customized Wiring: VFF,VCTF,VCT 30.75mm² (7A/125V) VCTF 31.25mm² (12A/125V) VCTF 32.0mm² （15A/125V) VCT 30.75mm² （10A,12A/125V) VCT 3*1.25mm² （12A,14A/125V)

[anmolsmsblog]

Rigo Women Cotton Full Sleeves Long Overcoat

Price: (as of – Details) Rigo Black Cotton Full Sleeves Long Overcoat for Women Product Dimensions ‏ : ‎ 20 x 15 x 5 cm; 500 g Date First Available ‏ : ‎ 21 November 2021 Manufacturer ‏ : ‎ Rigo International ASIN ‏ : ‎ B09MCR2143 Item model number ‏ : ‎ WSW031-1065-L Country of Origin ‏ : ‎ India Department ‏ : ‎ Women Manufacturer ‏ : ‎ Rigo International, RIGO International Plot No 18 12A…

[usafphantom2]

SR-71 Blackbird engineers had a perplexing problem: why some of the aircraft’s titanium corroded?

The SR-71, the most advanced member of the Blackbird family that included the A-12 and YF-12, was designed by a team of Lockheed personnel led by Clarence “Kelly” Johnson, then vice president of Lockheed’s Advanced Development Company Projects, commonly known as the “Skunk Works” and now a part of Lockheed Martin.

The Blackbird design originated in secrecy during the late 1950s with the A-12 reconnaissance aircraft that first flew in April 1962 and remained classified until 1976. President Lyndon Johnson publicly announced the existence of the YF-12A interceptor variant on Feb. 29, 1964, more than half a year after its maiden flight. The SR-71 completed its first flight on Dec. 22, 1964.

Production of the SR-71 was done at the Skunk Works plant, in Burbank, California, as the photos in this post show [the image were taken in 1965 and show some of the first SR-71 under construction: featured in the pictures are the first B models (957 and 956) under construction with an A-model (955). My dad Richard “Butch“ Sheffield told me that he watched these airplanes under construction at the Skunk Works plant at Burbank].

The airframes were built almost entirely of titanium and other exotic alloys to withstand heat generated by sustained high-speed flight: in fact, the Blackbirds were designed to cruise at Mach 3 continuously for more than one hour at altitudes up to 85,000 feet. Blackbird’s engineers had a perplexing problem as to why some of the titanium was corroding. However, they figured out the reason. It was chlorine in the water!

According to Wisconsin Metal Tech, the engineers of the SR-71 were among the first people in history to make real use of the material. In that process, they ended up throwing away a lot of material, some through necessity, some through error. At times the engineers were perplexed as to what was causing problems, but thankfully they documented and cataloged everything, which helped find trends in their failures. They discovered that spot welded parts made in the summer were failing very early in their life, but those welded in winter were fine. They eventually tracked the problem to the fact that the Burbank water treatment facility was adding chlorine to the water they used to clean the parts to prevent algae blooms in summer, but took it out in winter. Chlorine reacts with titanium, so they began using distilled water from this point on.

They discovered that their cadmium plated tools were leaving trace amounts of cadmium on bolts, which would cause galvanic corrosion and cause the bolts to fail. This discovery led to all cadmium tools to be removed from the workshop.

Be sure to check out Linda Sheffield Miller (Col Richard (Butch) Sheffield’s daughter, Col. Sheffield was an SR-71 Reconnaissance Systems Officer) Facebook Page Habubrats for awesome Blackbird’s photos and stories.

Written by Linda Sheffield Miller for aviationgeek club

@Habubrats71 via X

[gfuveelectronics]

GF3031 120A 500V high accuracy portable programmable three phase voltage and current source

The GF3031 programmable power source is a powerful and portable three phase current and voltage source. All test values are generated absolutely synthetically with a high degree of accuracy and stability. The source is available in 6A, 12A, 20A or 120A version. phase voltage output from 0 to 500V, phase shift from 0 to 360.000, accuracy 0.05 degree, power factor can set any value. The GF3031 three phase portable power source is a lightweight and portable current and voltage source based on newest technology and serves for solving this problem by simulating the required load conditions. Operation is performed by integrated 7" touch screen or via keyboards. It is a high precision test equipment as AMI R & D or energy meter manufacturer factory. This model three phase power source can test energy meter, power meter, ammeter, voltmeter, power factor meter & frequency meter etc.

FUNCTIONS ■ Individual load point settings;

■ Programmable power factors;

■ Programmable frequency 40-70Hz;

■ User friendly menu guided operation;

■ Color display with graphical interface;

■ Operation without need of an external PC;

■ Programmable phase shift control from 0-360.000°;

■ Configuration of balanced and unbalanced load points;

■ Indication of load values, vector diagram and waveform;

■ Programmable wave form generation for voltage and current;

■ Generation of up to the 63th harmonic in voltage and current;

■ Current, voltage and phase shift are adjustable to high accuracy individual per phase;

FEATURES ■ Portable design;

■ Weight light 15Kg;

■ With USB or RS232;

■ 7 inch TFT touch LCD;

■ 2-63st harmonics output;

■ Programmable controlled;

■ Accuracy class 0.05 or 0.1;

■ All test values are generated synthetically;

■ Three phase voltage generation up to 500 V;

■ Overload, short circuit, open circuit protection;

■ Three phase current generation up to 120 A (AC);

[jobskolkata]

Iron Steel Manufacturing Company || Auto cad designer Job || fresher Mechanical Jobs || Howrah || Kolkata || West Bengal

Golden opportunities in an iron steel manufacturing company’s jobs.

No under contractors’ pay role.

Unlock Your Dream Job!

In this Job Post, we dive into the "Ideal Career Zone," revealing the secrets to finding your perfect profession!

Job description

Mechanical Design Engineer Responsibilities:

3D Model Development:

Create 3D models and detailed technical drawings using E3D, S3D, AutoCAD 3D, Inventor, and Micro Station.

Collaboration with Engineering Teams:

Work closely with engineers to translate design concepts into precise technical specifications.

Design Documentation:

Prepare and review assembly and fabrication drawings, ensuring accuracy and compliance.

Design Calculations and Simulations:

Perform calculations and simulations to verify the functionality and adherence to industry standards.

Project Involvement:

Participate in project meetings and provide ongoing design support throughout the project lifecycle.

Design Revisions:

Modify designs based on feedback from stakeholders and evolving project requirements.

Eligibility :

Diploma or Bachelors degree in Mechanical Engineering or a related field.

0-1 years of relevant experience in mechanical design.

Proficiency in E3D, S3D, AutoCAD 3D, Inventor, and Micro Station.

Strong understanding of mechanical systems and components.

Excellent problem-solving skills and attention to detail.

Ability to work collaboratively in a team environment

Salary Package: Rupees 12K to Rupees 20K in a month.

Job type: Full–time

Auto-cad designing.

Supplemental Pay: Yearly bonus

Qualification: Mechanical Diploma (or) Degree for this job.

Interested candidates can apply or contact us:-

HR: 9 3 3 1 2 0 5 1 3 3

* Note:- This video is available in Hindi and Begali languages also. You can see it just search another video in hindi and Bengali voices. Many more openings available just search in Google “Ideal Career Zone” Kolkata.

You can find many more job details in various posts in various companies.

You may call us between 9 am to 8 pm

8 7 7 7 2 1 1 zero 1 6

9 3 3 1 2 zero 5 1 3 3

Or you can visit our office.

Ideal Career Zone

128/12A, BidhanSraniShyam Bazaar metro Gate No.1 Gandhi Market Behind Sajjaa Dhaam Bed Hiset Bed cover Show room Kolkata 7 lakh 4

Thank you for watching our channel Please subscribed and like our videos for more jobs opening. Thank You again.

#IronSteelManufacturingCompany, #AutocaddesignerJob, #fresherMechanicalJobs, #Howrah, #Kolkata, #WestBengal, #आयरनस्टीलमैन्युफैक्चरिंगकंपनी, #मार्केटिंगजॉब, #B2Bमार्केटिंग, #बिजनेसडेवलपमेंटमैनेजर, #हावड़ा, #कोलकाता, #पश्चिमबंगाल,

[abunaeem]

2024 Comprehensive Guide to Walton Air Conditioner Prices in Bangladesh

2024 Comprehensive Guide to Walton Air Conditioner Prices in Bangladesh

Walton, a prominent brand in the Bangladeshi electronics market, has earned a reputation for offering reliable, efficient, and affordable air conditioning solutions. Known for their innovative designs, energy-efficient models, and competitive pricing, Walton air conditioners are well-suited to meet the diverse needs of Bangladeshi households and businesses. This guide covers the top models, features, and current prices of Walton air conditioners available in Bangladesh for 2024.

1. Why Choose Walton Air Conditioners?

Walton air conditioners offer several advantages that make them a popular choice among consumers in Bangladesh:

Affordability: Walton provides cost-effective options, making it accessible for a wide range of consumers.

Energy Efficiency: Walton air conditioners come with energy-saving features, helping to reduce electricity bills.

Wide Range of Options: From basic models to high-end, smart ACs, Walton has a model for every need.

After-Sales Service: Walton is known for its comprehensive after-sales support, making it easy for users to maintain and repair their air conditioners.

2. Walton Air Conditioner Types and Price Ranges

Walton air conditioners are available in various types and price ranges, catering to different room sizes, cooling requirements, and budgets. Here’s an overview of the primary categories and their typical price range:

1 Ton Split AC: Suitable for small to medium rooms, with prices ranging from BDT 35,000 to BDT 45,000.

1.5 Ton Split AC: Ideal for medium to large rooms, priced between BDT 45,000 and BDT 60,000.

2 Ton Split AC: Perfect for larger spaces like offices or conference rooms, with prices typically ranging from BDT 60,000 to BDT 75,000.

Inverter AC Models: Energy-efficient models that adjust cooling based on room temperature, available from BDT 50,000 and up.

3. Top Walton AC Models and Their Prices in Bangladesh

Here are some of the top Walton AC models for 2024, including their features and price estimates:

Walton WSI-RIVERINE-12A (1 Ton)

Price: BDT 38,000

Features: Eco-friendly refrigerant, turbo cooling, and a sleek design. Perfect for small rooms, this model balances efficiency and performance.

Walton WSI-OCEANUS-18A (1.5 Ton)

Price: BDT 55,000

Features: Inverter technology, power-saving modes, and anti-corrosion protection. Ideal for mid-sized rooms, providing consistent cooling with reduced power usage.

Walton WSI-TROPICAL-24C (2 Ton)

Price: BDT 70,000

Features: Fast cooling, durable compressor, and low-noise operation. Built for large spaces, this model ensures quick cooling even in extreme temperatures.

Walton WSI-VERTEX-12A (1 Ton Inverter)

Price: BDT 45,000

Features: Energy-saving inverter technology, quick cooling, and auto-clean functionality. This model is highly efficient for small spaces, making it popular for home use.

Walton WSI-VANTAGE-18B (1.5 Ton Inverter)

Price: BDT 60,000

Features: Intelligent temperature control, enhanced airflow, and eco-friendly refrigerant. This model balances high performance with energy savings.

4. Key Features of Walton Air Conditioners

Walton air conditioners come with several features that enhance comfort, efficiency, and ease of use. Here’s a look at some of the standout features:

Eco-Friendly Refrigerants: Walton uses eco-friendly refrigerants (R410A and R32) in their ACs, reducing environmental impact and enhancing energy efficiency.

Inverter Technology: Many Walton models come with inverter technology, which adjusts compressor speed based on room temperature, saving up to 30% on energy consumption.

Turbo Cooling: Turbo cooling mode ensures rapid cooling during peak summer heat, allowing you to cool your room in a shorter time.

Anti-Bacterial Filter: This feature removes dust and allergens from the air, making Walton ACs ideal for people with respiratory issues.

Smart Features: Some models offer smart connectivity options, allowing users to control the AC via mobile apps or voice commands.

5. Walton Inverter AC Models and Energy Efficiency

Walton’s inverter AC models have gained popularity for their energy efficiency and environmental sustainability. Inverter ACs use variable-speed compressors, which reduce energy consumption and increase efficiency. Here’s a look at some benefits of Walton’s inverter ACs:

Low Power Consumption: Inverter ACs adjust the cooling capacity to maintain the desired temperature, resulting in significant power savings.

Consistent Cooling: They provide consistent cooling without frequent on-off cycles, ensuring uniform comfort.

Longer Compressor Life: Reduced wear and tear on the compressor, resulting in a longer lifespan for the unit.

6. Factors to Consider When Choosing a Walton Air Conditioner

When selecting a Walton air conditioner, consider the following factors:

Room Size: Choose the AC capacity based on your room size for efficient cooling.

Budget: Walton ACs come in a wide range of prices; set a budget that meets your cooling needs.

Inverter vs. Non-Inverter: While inverter ACs cost more initially, they save on long-term electricity bills.

Warranty: Walton provides warranties on most models; check the terms for additional peace of mind.

Noise Level: Opt for models with low noise levels for a more comfortable experience.

7. Where to Buy Walton Air Conditioners in Bangladesh

Walton air conditioners are available through various channels in Bangladesh, including:

Walton Showrooms: Walton has official showrooms across the country where you can see and purchase the latest models.

Online Platforms: Walton products are available on e-commerce platforms like Daraz, as well as Walton's official online store.

Authorized Dealers: Numerous authorized dealers offer Walton products with official warranties and service options.

8. Walton Air Conditioner After-Sales Service

Walton’s after-sales service is one of the reasons for its popularity in Bangladesh. With service centers nationwide, Walton provides convenient repair and maintenance support, ensuring a hassle-free ownership experience. Their service includes regular maintenance, repair services, and an extended warranty, which can help extend the life of your air conditioner.

Conclusion

Walton air conditioners offer a combination of affordability, performance, and advanced features, making them a top choice for many households and businesses in Bangladesh. From basic models for small rooms to inverter ACs for large spaces, Walton has a model to meet your needs. By choosing a Walton air conditioner, you can enjoy reliable cooling performance and energy efficiency, backed by a strong after-sales network. With this comprehensive guide, you should have all the information you need to make an informed purchase decision in 2024.

Mechanixac

[narangmedical]

The Hematocrit Centrifuge models CNT-12A and CNT-13A feature digital timers and RPM displays, with capacities of 12 and 24 capillary tubes respectively ... https://www.narang.com/laboratory-products/centrifuge/CNT-12A.php