#Launch SmartLink C

[eobdtooluk-blog]

How to Use Launch X431 SmartLink C as J2534 Passthru Device?

Launch X-431 SmartLink C 2.0 can be worked as local and remote J2534 Passthru device, and can be compatible with X431 V+, PRO3S+, PRO3 APEX, PRO3 ACE and PRO5 to perform diagnosis and remote ECU reprogramming for commercial vehicles, passenger vehicles, new energy and other models.

1.How to make X431 SmartLink C work as a Local J2534 Passthru device?

Need a USB cable to connect SmartLink C V2.0 Dongle and a PC

Make sure the PC has been installed with the OEM diagnostic software to perform the J2534 reprogramming.

The PC also needs to install with the LAUNCH's J2534 tool, which can be downloaded from www.cnlaunch.com.

Path: Products>> E-commerce product>> X-431 PAD VII Elite>> Download>> Download

Find “Smartlink J2534.zip”, and click “Download” for this option to download LAUNCH J2534 tool directly.

After downloading, you will see Launch J2534.exe and J2534 operation guide_EN.pdf.

Double-click “Launch J2534.exe” to run it, and follow the on-screen prompts to proceed until the installation is completed.

Then the J2534 reprogramming function is ready to start.

Run the diagnostic software on the PC

If the OEM software prompts you to select the target VCI (Vehicle Communication Interface) device, please choose “Launch J2534” (If no such prompt pops up, please follow the instructions on the screen to proceed directly) and then follow the onscreen instructions to proceed.

Note:

When used with the vehicle manufacturer���s programming application, the SmartLink and SmartBox device not only can work as a J2534 Pass-thru device, it also can work as a VCI device to read DTCs, clear DTCs and read live data etc.

2.How to make Smartlink C work as a Remote J2534 Passthru device?

Working with the PC installed with the OEM diagnostic software to perform the J2534 remote ECU reprogramming function. (need internet)

Make sure the following conditions are met before diagnosis.

Connect Launch SmartLink C V2.0 to the Internet which has a strong and stable network signal

Install the OEM diagnostic software on the PC

Install LAUNCH J2534 tool on the PC as well

After SmartLinkC is connected to the vehicle's DLC port and the Internet, and has been switched to the super remote diagnosis mode, start to perform the remote J2534 reprogramming operation.

[obd2gate-com]

Launch X-431 Smartlink B & C Software V1.0.4.6.10.52

This software update for Launch X-431 primarily focused on UI optimization. To ensure a smooth update process, please ensure that your network connection is stable, and pay attention to the software prompts during the update.

Here are the key improvements included in this update:

UI Optimization for Launch X-431:

a) “WiFi/BT/USB” will be removed from the serial number display.

b) The “Enter remote diagnostic” button will be renamed to “Remote Diagnostic Mode.” Clicking on this button will prompt users to choose between “Internet connection” or “WiFi configuration” to enter the SmartLink remote mode.

c) The settings button will be relocated to the upper right corner for easier access.

WiFi Configuration Optimization: The software will now remember the last used WiFi names and passwords, reducing the need for repeated password entry.

Boot Upgrade Function: A new boot upgrade function will be added to the settings to address slow initiation (3–5 mins) experienced by some dongles. This update should fix the issue.

English Translation Optimization: The English translation will be further improved for better user experience.

Expert Mode Optimization: The expert mode will also be optimized for enhanced performance.

Other General Optimizations: Various other improvements will be made to enhance the overall functionality.

Update Instructions:

To update Launch X-431 to V1.0.4.6.10.52, follow these steps:

Power up the dongle.

Click on “Enter remote diagnostic” > “Settings” > “System update” to initiate the update process.

That’s all the information about the upcoming Launch X-431 Smartlink B & C Software V1.0.4.6.10.52 update. Make sure to update now to enjoy the latest features and a better user experience!

[x431euinfo]

LAUNCH SmartLink C Work with PSA DIAGBOX No Problem

Tested LAUNCH SmartLink C J2534 passsthru device:

Successfully work with PSA DIAGBOX.

XENTRY works pretty good! DAS NO!

ODIS-S 23 AND 24(NOT OFFICIAL) work but not read all modules and all cars, not ok

BMW ISTA cannot see the device like PASSTHRU.

Renault Clip cannot see it like a PASSTHRU.

SmartLink C works with PSA DIAGBOX in Citroen C4.

Scan all systems.

Check fault codes in Engine ECU.

Done!

[cassieautoobdii]

Launch X-431 SmartLink C 2.0 Heavy-duty Truck Module for Commercial Vehicles/ Passenger/ New Energy Cars used with X-431 V+ PRO3S and PRO5 series

#launch #launchx431 #launchx431smartlinkc #smartlink #heavyduty #truckmodule

whatsapp:+8615886576826

[lizadcruzthings]

What Makes X-431 Euro Tab Iii The Most Complete High-End Garage Launch Diagnostic Tool?

The X-431 Euro Tab III, made available by Launch, is a newly created, high-end automobile diagnostic tool. This tool has been equipped with the new Smartlink® C VCI. This is an advanced module that allows enhanced communications and functionalities. The Euro Tab III is the Launch Diagnostic Tool, which runs on the highly recognized Launch diagnostic technology and the Android 9.0 operating…

[obd2eshop]

Launch X-431 latest Smartlink B & C Software V1.0.4.6.10.52 will come soon. The main content of this software update is UI optimization. Please ensure the network is normal and pay attention to the software prompts. 1. Launch X-431 UI optimization: a) Removal of "WiFi/BT/USB" under the serial number b)"Enter remote diagnostic" button changed to "Remote Diagnostic Mode" Clicking this button

[pavindaniel-blog]

2019 Skoda Octavia Onyx

Car-maker Skoda has launched the 2019 Octavia Onyx which is to be offered in both petrol and diesel options. The car comes equipped with black ORVMs, 16-inch Premia alloy wheels and LED taillamps with signature C shaped illumination. A 12-way electrically-adjustable driver and front passenger seats are present which provide lumbar support and has three programmable memory functions for the driver seat. The Skoda Octavia Onyx comes with an 8-inch touchscreen infotainment system that has a SmartLink technology MiorrorLink, Apple CarPlay and Android Auto. As far as safety is concerned, the car gets 6 airbags that are standard, along with ABS with EBD, Electronic Stability Control, Mechanical Brake Assist and much more. It also comes equipped with 1.8-litre TSI petrol engine and the 2.0-litre diesel engine. The version makes 178 bhp and 250 Nm of peak torque coupled with a 7-speed DSG automatic transmission. Meanwhile, the 2.0 TDI makes 141 bhp and 320 Nm torque that comes with an automatic 6-speed DSG.

Here at A4Auto, we help you look for used cars or second-hand cars, cars for sale and pre-owned cars from car dealers, along with used bikes.

[nextnahas]

Launch x431 cracked software

#Launch x431 cracked software how to

#Launch x431 cracked software cracked

#Launch x431 cracked software serial number

#Launch x431 cracked software software download

#Launch x431 cracked software Software Crack

#Launch x431 cracked software software download

If you are dealing in international import or export of Diagnostic Tools you can sign up for freeĪnd list your Diagnostic Tools with Automobiles & Motorcycles products and grow your business with us.įor more Diagnostic Tools suppliers you can check our listing pages or search for the desired category on Tradewheel's website. Launch X431 Crack Software Download Best Site Launch X431 Update Download Most people prefer EasyDiag 3. Tradewheel is a Business-to-Business platform that enables international traders dealing in Vehicle ToolsĪnd features more than 5461 products from 9 other categories. offers flexible prices for Diagnostic Tools variations depending on the importing country and quantity. Guangzhou Junliye Import And Export Co., Ltd.

#Launch x431 cracked software Software Crack

The price of Launch X431v Software Crack Car Diagnosis Scanner from China is based on the bulk order quantity. Launch x431V software crack car diagnosis scanner Price in China Please renew via Subscription card or update from the mall. Update your tool now and get new vehicle coverage and functionality. How to download 2017 launch x431 pro software: go to.

#Launch x431 cracked software how to

Compatibility Nokia release a new sealed today Windows. How to add new key for Honda City by Launch X431 IMMO PAD Launch Pad V/ Pad VII Diagnsotic Software Audi V28.31 Update Launch X431 Software Update in 2021.09 How to use Launch X431 PAD V and X-Prog3 to virgin Benz used ECU ME9.7 & TCU 722.9 How to Active Launch X431 Pad VII / Pad V Truck Diagnostic and Program Function How to solve Launch. Launch x431 master update keygen crack patch. Also I think no more developtment for GDS after year 2015 -2016.

#Launch x431 cracked software serial number

How to Configure the Online SCN Coding Function in Launch X431 PAD V or PAD VII when SCN Coding Menu is Missing. There is no craked software for GDS, you can only buy software foryour serial number and then you can load this soft via USB port to GDS machine. How to Perform ADAS Radar Calibration by LAUNCH X431 PAD V or PAD VII. Launch X431 Crack Software Download Best Site Launch X431 Update Download Most people prefer EasyDiag 3.0 Plus to a one-to-one kit is because when they change their car in the future, all they need to do is to buy the software for their next car instead of buying a brand new diagnostic kit. Keywords such as crack, download, serial, keygen, torrent, warez, etc. Matched product: for: 2022 New Launch X431 PAD VII PAD 7 with Smartlink C VCI Automotive Diagnostic Tool Support Online Coding and Programming.

#Launch x431 cracked software cracked

is located in China and deals exclusively in the production and export of Diagnostic Tools. The latest diagnostic software updates for LAUNCH X431 diagnostic scanners ( X431 Pad V, X431 PAD VII, X431 V Pro, X431 V+, X431 Pro Mini, X431 Pros Mini, X431 Pro3 etc). Launch x431 Diagun Last Software Cracked Last Cracked software for x431. offers premium quality Launch X431v Software Crack Car Diagnosis Scanner for B2B importers and distributors worldwide. Please let thé x431 update.exe run, then left click run, next, next and then finish.Guangzhou Junliye Import And Export Co., Ltd. Please double Ieft click your mousé over. On your désktop double left cIick the foIder x431 you created then inside youll find all the data and the manufacturers for your launch x431 update. The program dispIay the latest updatés from which yóu can select thé ones that yóu want to upgradé, you can chéck for a históry of your upgradés and also thé downloads that yóu have made. Share on Facébook Share on Twittér Please reload FoIlow Us. LAUNCH X431 iDiag Auto Diag Scanner user manual free dowmload Time.Cara Instal Crack Launch X431 PRO3 Easydiag Idiag.Cara Instal Crack Launch X431 PRO3 Easydiag Idiag.īerikut panduan instal software crack easydiag dan idiag X431 Pro3 1. Hi I have the launch.x431 iDiag users manual V1.00 - Elm327 ClubLAUNCH X431 iDiag users manual Please read this manual carefully before. EOBD2 Software X431 iDiag.cracked software for launch x431 - Digital Kaoscracked software for launch x431. Launch times431 Diagun Last Software program Cracked Final Cracked software for times431 Diagun, It will only function on times431 Diagun china Clone, Be aware: Dont try to format your credit card replace only the files in gagvehiclesxxx Rehabilitation version, After i will add english version. Launch X-431 V (X431 Pro)/X431 PRO3 V+ wifi/bluetooth full System Automotive Diagnostic scan tool is the completely substitutes X431 IV and X431 Diagun III.

[carobd2unit]

LAUNCH X431 PAD VII: In-depth Review

Introduction

Have you heard of Launch Tech X431 PAD VII? Do not worry. In this review, we bring you detailed information about this fantastic device. The device is equipped with a new Smartlink C that makes it faster than its competitors do. It supports online programming and has no limitations for diagnostic functions, tools, or vehicle types.

What then does Launch Tech X431 PAD VI offer? Let's dive right into it!

Overview

Launch Tech X431 PAD VII has superior features. Like other products in the Launch X431 series, this pad VII supports online programming and has high-end diagnostic features without limitation to diagnostic functions, tools, or vehicle coverage. With X431 PAD VII device, rest assured of quality display; it has a 13.3’ IPS capacitive touch screen that has a 120 x 1080 resolution. It has enough storage space, 8GB RAM, a processor speed of 2GHz, and thirty-two service functions.

This device comes with a Smartlink remote diagnosis. Its diagnostic tool possesses a topology mapping and a new module that allows you to upgrade your device with diagnosis software. With a more incredible operating system, Android OS V9.0, the device offers the most effective OE-level diagnostic coverage facilitated by multi-task cable software. It also has extended modules; videoscope, oscilloscope, sensor box, TPMS tools, battery tester, ADAS Calibration, and key immobilizer.

Finally, Launch Tech X431 PAD VII has 32 service functions, powerful special functions, and produces accurate test results. It supports many languages, not to mention its TPMS service. Most importantly, the device supports offline and online Coding and online programming.

If you are looking for a key programming device, X431 PAD VII is the best for you!

What you want to know more about high-end and high-quality Original Launch X431 Tool, go to visit: https://www.cardiagtool.co.uk/

📷

Let's now see how this device stands against older PAD versions.

Launch X431 PAD VII vs. Launch PAD V vs. Launch PAD III V2.0

Launch X431 PAD VIILaunch PAD VLaunch PAD III V2.0Product Dimensions353x236x71(mm) 320×211×46 (mm) 304.8×181.5×33.8 (mm)Item Weight14 kilograms10.25119 kilograms7.71107 kilogramsScreen Size13.3 inch Capacitive touch screen10.1 inch10.1 inchOBDII DiagnosticsFullFullFullSystem DiagnosticsAll systemsAll systemsAll systemsAdvanced service functions (Special functions, reset functions)

32 Special Functions by local diagnosis

More special functions are provided by Smartlink diagnosis

26 Special Functions21 Special FunctionsCoding/ Programming

Supports online Coding and programming for vehicles without online accounts.

Advanced Key Programming with X-PROG 3

Advanced Key Programming with X-PROG 3Advanced Key Programming with X-PROG 3Vehicle Coverage

Full system vehicle coverage for;

Passenger cars

Medium & Light-duty vehicles

Heavy-duty vehicles(Optional)

Passenger cars

Medium & Light-duty vehicles

Heavy-duty vehicles(Optional)

Passenger cars

Medium & Light-duty vehicles

Heavy-duty vehicles(Optional)

Superior Design and Hardware

Launch Tech X431 PAD VII comes with a 13.3 capacitive touch screen, 120 x 1080 dots of resolution, and 32 service functions. It is equipped with an Android 9.0 operating system, 2.0 GHz Octa-core optimized chipset, 8GB RAM, and 256 GB large storage memory. The vast storage memories minimize the loss of data. These features together make the device faster than its competitors do. It has a Smartlink remote diagnosis and a solid outer shell that complies with IP65 and is resistant to water and dust.

With faster Dual Wifi connectivity between the device and the VCI, the VCI keeps a quick and stable connection throughout the diagnostics. Finally, Launch X431 PAD VII has a high-capacity battery, about 19000mAh. The battery has a shorter charging time and a longer life span. Therefore, you do not have to worry about replacing the battery frequently.

Full System Diagnostics

Launch X431 PAD VII supports all system diagnostic functions, such as intelligent diagnosis. This function allows you to identify the VIN information automatically, thus quicker access to the system. This saves you much time spent going through the various steps in the manual. It has a Smartlink C, a new intelligent diagnostic box with a Linux system, and supports several modes of communication such as BT, USB, and WIFI. It also supports various diagnostic protocols.

It supports local diagnostics. Whenever the intelligent diagnostic is unavailable, mostly in regions with poor network connectivity, this function enables you to choose the make of the vehicle manually, thus vehicle detection. This is made possible since Launch x431 PAD VII could read and clear DTCs and Read Data Stream.

Moreover, the device allows you to communicate with car manufacturers more easily and faster. This function enables you to forward diagnosis software problems to the manufacturer to analyze or troubleshoot and assist. Similarly, you could also communicate with the car technicians to diagnose the vehicle and offer immediate assistance. The device has a real-time voltage display that helps technicians in monitoring the vehicle voltage condition during diagnosis.

Advanced Service Functions

Launch Tech X431 PAD VII is equipped with thirty-two service functions. The functions include Nox sensor reset, AdBlue reset, DPF regeneration, gearbox reset, service lamp reset, and injector coding.

Launch X431 PAD VII supports eight extended modules such as oscilloscope, videoscope, sensor box, key immobilizer, battery tester and TPMs tools. These modules enable technicians to solve complicated defects or problems quickly.

With Launch X431 PAD VII, you can perform Advanced Driver Assistance System calibration as long as you first activate the ADAS function. However, this function is optional. Through IMMO service function, the device enables you to perform an anti-theft key matching.

Similarly, the device supports TPMs service functions. Together with the X431 TGSUN device, this function allows you to initiate tire pressure information, program the tire pressure sensor, and maneuver through the TPMS relearning functions.

The device supports guiding functions for Audi, Skoda, Seat, and Volkswagen. It also supports AutoAuth for FCA US SGW Access, personalization for BMW, Porsche, Toyota, Subaru, etc., Power balance for GM, FORD, etc., and Programmable Module Installation for Ford and Mazda. Further, it supports component matching for several car models such as Honda, Nissan, BMW, Audi, Ford, etc.

Finally, Launch Tech X431 PAD VII supports several languages and has a wide vehicle coverage include passenger cars, medium-duty vehicles, and heavy-duty vehicles (optional).

Bi-directional control, Coding, and Programming

Launch X431 PAD VII supports actuation tests such as the EVAP test, EGR test, Idle Speed Adjustment, Compression test, Injector volume commands, etc.

The device allows you to submit information to the data bus and read the data from the same device simultaneously. It allows you to visually check the DTCs and all the system's communication grades through the topology mapping function. The OBDII/EOBD Scan enables you to check engine warning lights, study engine mission level and find VIN EIN number.

Launch Tech X431 PAD VII allows you to perform advanced ECU coding and online Coding.

Launch X431 PAD VII supports online Coding; with the Launch X-PROG 3 device (bought separately), you could perform advanced key programming. It supports variant Coding for Benz, online Coding for VW, Audi, BMW, etc. Further, the device supports online Parameterization, calibration, and online account login services for Volkswagen, Audi, Skoda, and Seat.

Supported Protocols and Vehicle Coverage

Launch X431 PAD VII supports D-PDU / J2534 / RP1210 diagnostic standard, the latest diagnosis communication protocol of CAN/DOIP/CAN FD, and 2.4G/5G dual-band. Moreover, it supports all the five major OBD2 protocols, such as ISO 14230PWM. J1850 PWM, ISO 9141-2, CAN Bus, and J1850 VPW.

It has wide vehicle coverage; passenger cars, medium-duty, light duty, and heavy-duty vehicles (optional). Its vehicle coverage supports cars in the United States, Europe, and Asia, covering over one hundred and ten brands upgraded timely such as Ford, BMW, Benz… It is considered one of the best Ford scan tools.

Warranty, Software update, and Price

The device has a one-year warranty that covers defects from materials or artisanship. The warranty is limited to purchasers for self-use or business.

Launch X431 PAD VII has a free online update for twelve months from the purchase date. You are enabled to update frequently used software and the standard software for the diagnostic app. Consequently, the warranty is renewal after the expiry date.

Most traders have this device in stock, and depending on where you purchase it, you should be ready to release over $ 4000 from your budget.

Marketed Users

The device is a requirement for professional technicians who find it essential in solving complicated vehicle problems. It provides immediate, fast, and effective diagnostic functions used in diagnosing, researching, and repairing vehicles.

Car owners, too, love this tool. It enables them to program and diagnose their vehicle, among other things.

Vehicle fanatics would also find this device good equipment for practical studies and research.

Final Thoughts

Launch Tech X431 PAD is a high-end diagnostic tool that every car owner or technician wishes to have. The device comes with 32 service functions, superior design, and hardware and supports online Coding and programming. It has a new Smartlink that facilitates faster connections making it faster than the previous tools.

It supports several communication protocols, multi-languages, and wide vehicle coverage. With a high operating system and ample storage memories, sending and receiving data is more efficient for the users.

Finally, the device facilitates manual vehicle detection through the remote diagnosis function. For sure, Launch X431 PAD VII is the right tool for every technician or owner. Grab yours!

Source:http://blog.cardiagtool.co.uk/launch-x431-pad-vii-in-depth-review/

[obdiishop]

X-431 PAD VII -  US$3588

https://www.obdii.shop/goods-145-Launch-X431-PAD-VII-Pad-7-Full-System-Diagnostic-Tool.html

X-431 PAD VII is an unexpected high-end diagnostic tool from LAUNCH, comes with the ADAS calibration function, 26 service functions, TPMS service and 8 extended modules functions. New Smartlink C VCI powers technician a new diagnostic level without the limitation of diagnostic functions, tools and vehicle types. Highlights： Free update online for 1 year With 32 services functions Online Programming: BMW, Benz, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti and many coverage from Smartlink Supported Language: English, Chinese and other language depending on the car makes

Features

1. Full system vehicle coverage for U.S., Asian and European markets over 110 brands, which is continually updated

2. Upgrade and expand the X-431 PAD VII with more software and service via the new module 'MALL' as demanded

3. Real-time voltage display helps technician to monitor the voltage condition of vehicle during the diagnosis

4. Topology mapping gives a visual checking on DTCs and all systems communication status

5. Support automotive communication protocols CAN/CANFD/DoIP and automotive communication standards J2534/D-PDU/RP1210

6. Auto-detects the communications protocol of the vehicle and assist to check automotive OBDII port pin damaged or not

7. Intelligent diagnostic enable identify VIN automatically and access system quickly

8. Guided function for VW and AUDI

9. Optional ADAS calibration function increases more revenue

10. Advanced coding and programming function

11. An extended solutio to support TPMS service

12. 2.4GHz & 5GHz dual band communication ensures quick and stable connection

13. Empower technician to diagnose light, medium & heavy duty vehicles with Smarlink C

14. The basic functions include read & clear DTC, remote diagnosis, Bi-directional control, live data graph, wireless software update etc.

15. Build-in repair information and training video modules help to track and fix

32 Service Functions:

1.Service Lamp Reset

2.Electronic Throttle

3.Brake Reset

4.Immobilizer Reset

5.Battery Reset

6.Injector Coding

7.SAS Reset

8.TPMS Reset

9.ABS Bleeding

10.Gear Learning

11.DPF Regeneration

12.Gearbox Reset

13.Headlamp Reset

14.Sunroof Initialization

15.SUS Reset

16.EGR Adaption

17.A/F Reset

18.AdBlue Reset

19.Nox Sensor Reset

20.Stop/Start settings

21.Transport Mode

22.Coolant Bleed

23.Windows Calibrations

24.Seat Calibrations

25.Tyre Reset

26.Language Change

[eobdtooluk-blog]

Launch X431 PRO5 Key Programmer Software Update Tutorial

Both Launch X431 PRO5 SmartLink (new) and X431 PRO5 SmartBox (old) can work with X431 Key Programmer to do key programming and remote functions. The main difference is that the new Pro5 has a Type-C connector that can directly connect with X-431 Key Programmer, but the old Pro5 doesn’t have a Type-C connector, and requires an extra OTG USB Micro to USB-C Adapter. Check the details below.

Kindly notice:

New X431 PRO5 and old PRO5 also can work with X431 i-TPMS Tool, X431 X-Prog3 to do 315/433MHz Sensors's activation, programming, relearning and diagnosis, and ECU &TCU clone.

*X431 PRO5 SmartBox also needs an OTG USB Micro to USB-C Adapter.

Simple guide to update key programmer software on Launch X431 PRO5:

1.Connect X-431 PRO5 SmartLink and Launch X431 Key Programmer directly

*Connect X-431 PRO5 SmartBox and X-431 Key Programmer via OTG USB Micro to USB-C adapter

2.Update X-431 PRO5 to the latest APK

3. Update software

4. Update firmware and remote database in the Key Programmer option

5. After updating, you can perform the key programming function normally.

Note:

The key programmer software update method also applies to X431 PRO, X431 CRP919E BT, CRP919X BT, X431 IMMO Plus, IMMO Elite, IMMO Pad, IMMO Pro, Pros Elite, X431 PAD VII, X431 PAD V, Pro3 APEX, Pro3 ACE, X431 PRO STAR, Euro Tab III, etc.

Reference:

[obd2gate-com]

How to Operate the Launch X431 Pad VII?

The Launch X431 Pad VII is considered one of the finest scanning tools available currently. While it might not be the fastest, it boasts versatility and effectiveness for various tasks. If you plan to use this tool, it’s essential to have some knowledge about scanning tools. Let’s take a brief look at how to use the main functions of the X431 Pad VII.

Job Menu Interface: Upon opening the Launch X431 Pad VII, you’ll encounter the Job Menu interface.

The main items included in the Launch X431 Pad VII are as follows:

Intelligent Diagnose: 

This module allows you to retrieve vehicle data from the cloud server for quick testing by reading the VIN. Furthermore, users can check historical repair records online through this module.

Step 1: Tap “Intelligent Diagnose” on the Job Menu.

Step 2: After pairing is complete, the tablet will read the vehicle’s VIN.

Step 3: Tap “Diagnostic” to initiate a new diagnostic session.

Step 4: Tap “Scan History” to view the historical repair records and tap “View record” to see the details of the current diagnostic report.

X431 PAD VII Local Diagnose: 

This function enables manual vehicle diagnostics. It allows you to perform various common repair and maintenance tasks such as Oil Reset Service, Electronic Parking Brake Reset, Steering Angle Calibration, ABS Bleeding, TPMS (Tire Pressure Monitor System) Reset, Gear Learning, IMMO Service, Injector Coding, Battery Maintenance System, Diesel Particulate Filter (DPF) Regeneration, Electronic Throttle Position Reset, Gearbox Matching, AFS (Adaptive Front-lighting System) Reset, Sunroof Initialization, Suspension Calibration, and more.

Tap “Local Diagnose” to access the vehicle selection page and utilize these functions.

SmartLink: 

The SmartLink system is a potent remote diagnostics solution developed by LAUNCH. It consists of the following parts:

SmartLink Service Platform: For SmartLink C posting assistance requests and SmartLink B accepting orders.

SmartLink C dongle: For technicians seeking technical assistance and additional expertise on various vehicle issues.

SmartLink B dongle: For service providers or master technicians providing technical assistance service.

X431 PAD VII TPMS: 

This module deals with the Tire Pressure Monitoring System. It allows you to activate tire pressure information, program tire pressure sensors, and perform TPMS relearning functions, among others.

X431 PAD VII Software Update: 

To update vehicle diagnostic software and APK.

Diagnostic History: 

This function records every detail of the diagnostic process after a vehicle diagnosis is performed. The History function provides quick access to tested vehicles, allowing users to resume the last operation without starting from scratch.

Feedback: 

This feature enables users to submit feedback on the recent 20 diagnostics of their X431 Pad VII logs for issue analysis.

ADAS (Advanced Driver Assistance System):

This function enables users to perform ADAS calibration operations. Follow the steps below to activate it:

Step 1: Tap “ADAS” on the Job Menu.

Step 2: Functions included in this module: ADAS Calibration, Product Introduction, Product Manual, Adjustment Steps, and ADAS Vehicle Coverage.

Step 3: Tap “ADAS Calibration.”

Step 4: Tap “Activate” to enter the ADAS activation screen.

Step 5: Scratch or scrape the designated area on the Activation Card to reveal the password, and input the 24-digit password to activate it.

Mall: 

This module allows users to subscribe to additional software or service functions that are not integrated into the diagnostic tool online.

Vehicle Coverage: 

To check the vehicle models supported on the tablet.

Launch X431 Pad VII also offers various other professional and comprehensive functions, which cannot be detailed here due to the article’s length. If you have time, you can explore and try them out to have a great experience with the tool.

[x431euinfo]

Launch DOIP Connection Guide for X431 PRO5, PRO Series with DBScar VII, PAD III

DoIP (Diagnostics over Internet Protocol) is a standardized communication protocol used in the automotive industry for vehicle diagnostics. It facilitates the exchange of diagnostic data between diagnostic tools and a vehicle's electronic control units (ECUs) via IP networks.

Our connection guide below offers a customized approach to diagnose vehicle using DoIP, making high-speed, secure diagnostics accessible for your needs.

X431shop.de offers five connection methods to accommodate different diagnostic needs for vehicles utilizing the DolP(Diagnostic over IP)

protocol.

Here's a summary of the available methods: Method 1 For X-431 PR05 Connection Method 2 For X-431 PRO3 LINK Connection Method 3 For X-431 PADIII V3.0/PRO3 SE/PRO SE Connection Method 4 For X-431 PADIII,X-431 PADIII V2 Connection Method 5 For X-431 PAD9/7/5 LINK Connection (Recommended)

Method 1 SmartLink C X-431 PR05:Micro USB to Tablet Use X-431 PRO5 with USB Type B to Micro USB cable.203010385

Method 2 SmartLink C X-431 PR03 LINK TYPE C to Tablet Use X-431 PRO3 LINK with USB Type A to Type B cable.103022245

Method 3 DBScar VII+X-431 PADIII V3.0/PR03 SE/PRO SE/CRP919 MAX: Y-splitter cable to Tablet PCS DolP adapter cable (for DBScar VIl)

we have the DBScar VII DOIP cable now on sale:

Method 4 DBScar IV X-431 PADIII/PADIII V2:Y-splitter cable RJ45 PCS X-431 BMW F-chassis ECU programming cable 105022225

Method 5 SMARTLINK C X-431 PAD9/7/5 Complete support,no separate DolP cable needed.

[motorkeera]

Skoda Karoq, Kodiaq, Superb get new infotainment system in international markets. Skoda has revealed a mild model-year update for the Karoq, Kodiaq and Superb ranges in international markets, focusing mainly on improving connectivity and software functions. The primary revision is the debut of a new-generation infotainment system. Based on the Volkswagen Group’s latest interface, it has a more sophisticated digital voice assistant, dubbed Laura, plus features such as internet radio and wireless SmartLink.  The system adds a permanent internet connection via a built-in SIM, with data provided by Skoda. That feeds to the new voice assistant, which is able to understand 15 languages and “process fluently spoken sentences” in Czech, English, German, French, Italian and Spanish. The new wireless SmartLink function enables Android Auto and Apple CarPlay to be used without plugging the phone in. The physical touchscreens themselves have been upgraded, with an 8.0-inch touchscreen and 'Amundsen' navigation for entry-level versions and a 9.2-inch system with ‘Columbus’ nav. Updates come over-the-air and the Amundsen and Columbus systems can now be set up with a specific user ID account and profile. More app-based functions have also been added, including the ability to transfer directions from your phone to the car’s sat-nav. Users can also store multiple bespoke car settings and transfer them to different Skoda models: up to 14 owner profiles and one guest profile can be set up. In addition, the latest USB-C ports are being introduced in all three new models, including the option of one built-in to the rear-view mirror panel to power a dashcam. The latter option will also be offered in the Scala hatchback and Kamiq SUV. In India, the recently launched Karoq and the Superb facelift both have an 8.0-inch infotainment system as standard fit. Even the Rapid midsize sedan gets an 8.0-inch unit, though lower variants make do with a 6.5-inch system. However, none of them run this new-gen system, which is likely to come to India in the future.  https://www.instagram.com/p/CCD9hSmnTUT/?igshid=1oh35zmt6pyrq

[savetopnow]

2018-03-21 20 CAR now

CAR

Auto Spies

#NYIAS: RENDERED SPECULATION — Volkswagen Shows Off An All-new Atlas Five-door, Is THIS What It Needs For MORE Sales?

NYIAS: Jeep Unveils Seven Concept Vehicles For 52nd Annual Moab Easter Jeep Safari

BMW's New 3 Series Will Have Multiple M Performance Versions

Volkswagen Confirms New SUV To Slot Below Tiguan For US Market

Kia To Place Germans On Notice At NYIAS With Next Gen K900

Autoblog

Fatal accident with self-driving car raises novel legal questions

2019 Mercedes-Benz C-Class Coupe and Cabriolet revealed ahead of New York

Master Lego builder creates a life-size Lego Toyota Camry

Ford’s new SmartLink plug-in modem brings older models up to snuff

Aye Captain! Hennessey's 2018 Lincoln Navigator has 600 HP

Car Throttle

Another Baby Driver Stunt WRX Is Up For Grabs

These Simultaneous Explosions Are Mad Even For The World Of Drag Racing

The Refreshed Mercedes-AMG C43 Coupe Is Here With 384bhp And 'Proper' Exhaust Pipes

5 Toyota GR Supra Concept Liveries We Just Had To Render

A Lotus SUV Is Coming To Give The Porsche Macan A Kicking

Electrek

Tesla shows off electric semi truck prototype at private event for big customer PepsiCo

Tesla’s Siri integration now works with Model 3

A closer look at Porsche’s all-electric Mission E next to Tesla Model S in augmented reality

Green Deals: two-pack TP-Link Wi-Fi Smart Plugs $39 (Reg. 55), more

Bollinger updates all-electric utility truck with bigger battery pack for 200 miles of range

Inside EVs

Watch As Jaguar I-Pace Gets Test Driven, Scores Only 6 Out Of 10

VW Boss – e-Golf Is Nearly Sold Out

BMW M3 Owner Test Drives / Reviews Tesla Model 3

Tested – Snow Tires Increase Energy Consumption By 7% On Tesla Model S

LG Chem, Samsung SDI Named Battery Energy Storage Leaders, Not Tesla

Jalopnik

The 1989 Tokyo Motor Show Is Where I Will Go To Find Joy Again

Monterey Car Week Is Best Experienced In A 1972 Porsche 911

Here's What Interference Engines Are And Why They Exist At All

If You Were Looking For Another Chance To Buy Baby Driver's Subaru WRX This Is It

Comment Of The Day: Jeep Be With You Edition

Motortrend

Jobs Jobs Jobs: But Where Are the Workers? – Reference Mark

2017 Ford F-250 Super Duty King Ranch Long-Term Update 3: Size Matters, Part 1

Mazda CX-9 Adds Rear Seat Entertainment System

2019 Mercedes-Benz C-Class Coupe and Cabriolet Get a Power Bump, More Tech

2019 Ford Fusion First Look: Seventh-Year Itch

Reddit Cars

THE SKID FACTORY - Turbo LS1 R32 Skyline [EP1]

Leaking fluids?

BMW headquarters raided over emissions cheating allegations

TIL The procedure Car and Driver used launch the Porsche from 0-60 in a stunning 3.6 seconds (in 1987!) was: lock the AWD system, rev to 7000 RPM, then dump the clutch

New 2018 Jaguar F-TYPE SVR | Exhaust Note | JaguarUSA

Sunday Times Driving

What spanners: older drivers nervous of DIY wasting £390m on car repairs

Dacia way to do it: Duster 4×4 is the most affordable new car to buy and run

Me and My Motor: Tatiana Calderon, Alfa Romeo Sauber F1 test driver

Blight van man: huge rise in theft of vans with ‘smart keys’

Pedestrian killed by Uber self-driving car in America

The Car Connection

2019 Mercedes-Benz C-Class debuts: seductive tech updates inside and out

2018 Kia Stinger vs. 2018 BMW 3-Series: Compare Cars

2018 Mercedes-Benz C-Class

2019 Ford Fusion adds safety tech, allegedly new styling

2018 Mercedes-Benz G-Class

The CarGurus Blog

Top Headlines From March 10 – 16

New to the Used Market: Volvo XC40

Half Price Hot Hatch: BMW M135i

Top Headlines From March 3 – 9

Geneva motor show: Five great cars, five years on

The Torque Report

Audi says that the R8 is not getting a V6

2019 Mercedes-Benz C-Class Coupe and Cabriolet get sporty updates

Audi R8 to get a turbocharged V6 from Porsche

2019 Ford Fusion debuts with Co-Pilot360 driver-assist tech

Jeep unveils seven concepts for the annual Moab Easter Jeep Safari

The Truth About Cars

Here Are Your Easter Jeep Safari Concepts for 2018

Spot the Changes: 2019 Ford Fusion Gains Newish Face, Plug-in Version Now Takes the Long(er) Way Home

As It Tries to Gain Traction in Europe, Jeep Brand Boss Promises ‘the Year of Jeep’

Unpacking the Autonomous Uber Fatality as Details Emerge [Updated]

The Thin Green Line: 2018 Honda Accord Hybrid Heads to Dealers, Undercuts Nemesis in Price

[watchilove]

Cartier presented during the online Watches & Wonders 2020 new versions of Pasha de Cartier. The return of one of the most loved watches of the French Maison was celebrated with two sizes, in 35mm and respectively 41mm, in steel and gold. The new pieces respect the original design in all details: A square inside a circle, 4 Arabic numerals, 4 clous de Paris, a screw-down crown cover. We have a look today at the ladies oriented piece, the Pasha de Cartier 35mm in steel with a leather strap.

The return of the royal sports spirit – Pasha de Cartier

I hope all of you already know the story of the Pasha watch. It all started in 1932/33 when the Sultan of Marrakech turned to the french Maison with the request of a sports watch that can be worn even by bathing. The Cartier Pasha is considered to be the first waterproof timepiece of the brand.

The watch was introduced in the Cartier permanent collection in 1943. The screw-down crown cap cover used a small chain for case fixation. The watch was also fitted with the guard over the crystal to protect is against physical shocks. This Pasha story was not confirmed officially by Cartier.

Four decades later, Cartier was in search of a timepiece to fill the sports timepieces gap in its collection. The master watchmaker and watch designer Gérald Genta created the modern Pasha and the brands released it in 1985. The Pasha C collection was launched in 1995. More about the modern history of Pasha can be found in this article written by George Cramer.

The Pasha case – 35 years of recognisable design

Cartier Pasha is one of those timeless timepieces recognisable by a mile. The 35mm steel case is similar in size and look with the well known and loved 1995’s Pasha C. The case has a thickness of 9.37mm. The caseband is decorated with a fine brushing. The bezel and the central lugs are mirror polished.

The new Pasha comes with a blue synthetic spinel cabochon. Under the guard, the crown itself was also fitted with a small cabochon. The strap fixation system has kept the legendary Clous de Paris terminations.

The fast-changing leather strap is fitted with a two-buttons clasp. The strap change is done in seconds due to the innovative push-button system.

Since I am already good accustomed with the 35mm Pasha C, the new watch comes with a very familiar wrist feel. Even if the watch is intended for the feminine segment (the fuchsia strap could be considered a strong hint), I liked the watch’s presence even for myself.

Guilloche and blue swords hands

As a Pasha should be, the watch comes with the well-known square in a circle integration. Another set of Pasha recognisable elements are the thermally blued sword hands on a guilloche pattern background.

The guilloche dial suffered from a subtle smoked effect towards the edge. The dégrade effect makes the integration of the black numerals more natural.

The addition of applied indexes with black lacquer fills the dial’s layout, adding an elegant note. The square railtrack holds the hour and minutes indexes.

Unfortunately for some, the 35mm Pasha does not have a date window.

Cartier Calibre 1847 MC

The new automatic Pasha is powered by the Cartier’s in-house calibre 1847 MC. The movement was introduced 5 years ago in the Cartier Clé collection. Since then, the calibre 1847 was also used in the Ronde and Ballon Bleu collections. This calibre can be found even in the Santos de Cartier.

For the 35mm Pasha, it was decided to leave the date out. Cartier justifies the design choice with market studies that revealed no interest in the date complication. I hope that the brand will still create versions with date.

Calibre 1847 MC is a modern 4Hz movement with a power reserve of 40 hours. The decorations choice reveals sandblasting, Côtes de Genève and a delicate chamfer with a polished finish. While the decorations are mostly on the industrial side and less on the hand finishing, the elegant adornment keeps the movement on the affordable side. A high-end hand finishing will increase the price exponentially. For less than 6k €, you get a beautiful watch with an in-house movement and an incredible heritage. No complaints can be made here.

Below, a short video with the Pasha de Cartier 35mm. Unfortunately, it was filmed with Samsung S20 Ultra that has a troublesome focusing system and the video is fogy. I decided to still used it to give you an idea about the watch feel and proportions.

Endnotes

As a long time lover of the Pasha Collection, I can only salute the revive of the collection. Cartier invited me to Munich to see the novelties and I would like to thank them for the nice time there. During the presentation, I was immediately conquered by the combination of 35mm steel case and fuchsia leather strap. Don’t get me wrong, I love the bracelet. But this combination was the one that knocked me over. Very elegant and feminine.

Pasha is offered with two leather straps or a leather strap and a bracelet, all featuring the new quick-release system. A great feature, I might say. Changing a strap in a matter of seconds according to mood and outfit is a great plus these days.

The new Pasha de Cartier 35mm would be available in the Cartier Boutiques starting with September.

Cartier Pasha de Cartier 35mm Technical Specifications and Price

Reference

CRWSPA0012 – Interchangeable QuickSwitch navy blue and fuchsia alligator leather straps, 5,700€ (price in Germany with 19%)*

CRWSPA0013 – Interchangeable QuickSwitch steel bracelet and navy blue alligator leather strap, 6,150€ (price in Germany with 19%)*

Movement

Manufacture mechanical movement 1847 MC

Automatic

Encasing diameter: 11 lines 1/2

Total dimension: 25.6 mm

Thickness: 3.77 mm

Number of jewels: 23

Frequency: 28’800 vibrations/hour

Power reserve: 40 hours

Case

Diameter: 35 mm

Thickness: 9.37 mm

Steel

Crown set with a blue synthetic spinel cabochon

Strap and buckle

Fuschia alligator leather strap

SmartLink size adjustment system

*Form 1st July 2020 until 31 December 2020, the German 19% VAT was reduced to 16% to minimise the effects of the Covid19. The indicated prices are calculated with 19%VAT.

Cartier Pasha de Cartier 35mm Image Gallery

Review Cartier Pasha de Cartier 35mm Cartier presented during the online Watches & Wonders 2020 new versions of Pasha de Cartier. The return of one of the most loved watches of the French Maison was celebrated with two sizes, in 35mm and respectively 41mm, in steel and gold.