#CG100 Prog III
Explore tagged Tumblr posts
Visit Tumblr Blog
Explore Tumblr blogs with no restrictions, modern design and the best experience.
Last Seen Tumblr Blogs
Fun Fact
Tumblr.com rank in the US is 25.
Text
Can CG100 Prog III Repair VW MQB Cluster Mileage?
Good news!!! CG100 Prog III can repair mileage for VW MQB D70F34XX DF0F35XX 5A clusters the same as CG100X now.
It requires CG100 Special VW MQB Instrument Repair Adapter and D1 Adapter to work together. No need to cut wire or lift pins!
CG CG100 D70F34xx/D70F35xx Adapter Functions:
Help users quickly and non-destructively calibrate the instrument mileage,
Help to change the mileage
Help to do the instrument testing
Support repeated use
In addition, CGDI CG100X Programmer only needs CG100X D1 Adapter to repair mileage on VW MQB V850 (D70FXX) 5A and RH850 (R7F7xx) 5A & 5C & 5D clusters.
Support models:
D70F34XX 5ACluster
DF0F35XX5A Cluster
Volkswagen MQB D70F3526 (A2C81589700) (read-write), D70F3529 (read-write), D70F3532 (A2C81589500) (read-write)
Volkswagen D70F35xx MQB D70F3525 (A2C81589600)
Volkswagen MQB D70F3525 (A2C81589600)
Volkswagen D70F35xx MQB D70F3526+95320 (read write)
Volkswagen MQB D70F3525+95320
Volkswagen D70F35xx MQB Full LCD D70F3525 (A2C81589600)
Volkswagen D70F35xx MQB Full LCD D70F3526
Compatible the car models:
Volkswagen Passat, Magotan, T-ROC, Tayron, Bora, Sagitar, Tharu, Teramont, Tiguan, Lamando, CC, Golf, etc
R7F701401 (5A and 5C Clusters)
R7F701402 (5A and 5C Clusters)
R7F701407 (5A and 5C Clusters)
R7F701404 (Only 5C Clusters)
R7F701406 (Only 5C Clusters)
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701404 (Only 5D Meters)
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701401 (Only 5D Meters)
0 notes
Text
V6.7.2.0 CG100 Prog III Full Version Airbag Restore Device including All Functions of Renesas SRS and Infineon XC236x FLASH
#cg100 #cg100full #cgdi #airbagreset #airbagrestore
wasap.my/+8615886576826
0 notes
Text
CG100 PROG III Mileage Repair Tutorials for Honda Accord
This article is to share the customers with the CG100 PROG III Mileage Repair Tutorials for Honda Accord .
Operation Steps:
Connect the device correctly, make sure it works OK.
Here is the chip number for Honda Accord:
📷
Tap “Instrument”>>Asian car>>Honda>>ACCORD>>S6J3001(read-write)
📷 📷
This is the Honda Accord Wiring Diagram Board, follow it strictly to connect all the wires needed.
📷
Mileage shown on BDM+4ExtBoard now(Not repaired):
📷
Tap “Start”, it will connect the BDM board>>initializing the device>>reading EEPROM of chip
📷 📷
When reading completed, save the data file of S6J3001(read-write). You must save it, otherwise, you can’t do the next step.
📷
Tap “Open”>>555.bin file (as an example)>>Write
Wait 1 or 2 minutes, writing succeeded!
📷📷 📷 📷
Check the repaired mileage here in the board. It shows “555 km”.
📷
It means operation for Honda Accord Mileage Repair is a big success!
This is how we can use CG100 PROG III auto computer programmer to help us adjust car mileage.
That's all. Thank you for sharing your time with us!
Don't forget to contact us at:
Email: [email protected] Skype: cardiag.co.uk Whatsapp: +86 15002705698
Or leave a message at https://www.cardiagtool.co.uk/
Source:http://blog.cardiagtool.co.uk/cg100-prog-iii-mileage-repair-tutorials-for-honda-accord/
0 notes
Text
How to Use CG100 Prog Repair Honda Airbag
How to use CG100 PROG III to repair airbag on Honda ECU 77960-T9A-F411-M2 R5F2154 in step-by-step procedure.CGDI BMW Programmer Model: Honda No.: 77960-T9A-F411-M2 Chip: R5F2154 1.Power off the vehicle, remove the airbag computer, check the style and the chip. 2.Open the CG100 special software, choose "Airbag", then "Honda", and wire according to the wiring diagram. 3.After confirming that the wiring is correct, CG100 PROG III is powered on, operate it according to the software prompts in step by step procedure. Note: Please do not touch any cable when it is reading. Save file successfully. Note: Please do not touch any cables when it is repairing. 4.Get message "Repair successfully", please put the airbag computer back on the car and test it if it is ok. CG100 III tech support is offered by www.obd360.com
0 notes
Text
How to use CG100 Pro III to repair airbag for Land Rover Aurora 2014?
How to use CG100 Pro III to repair airbag for Land Rover Aurora 2014?
Car type: 2014 Land Rover Aurora
Airbag No: DK62-14D374-AG
Tool Option: CG100 PROG III Airbag Restore Devices
Step-by-step procedure:
Check the vehicle.
The airbag lights on all the time.
Access professional decoder detection and clear the DTC.
Disassemble the car, find the airbag computer board, confirm the chip.
Open the software, enter the corresponding operation interface, find the…
View On WordPress
0 notes
Text
CGDI MB Prog Customers Frequency Questions
Question: Where to buy CGDI MB tokens?
Answer: Buy token here:
http://www.cgdishop.com/wholesale/cgdi-prog-bmw-msv80-car-key-programmer.html
CGDI Prog MB can calculate the password twice free each day for the first 180 days (from the day you activate device) 2. It will cost usd70 for another 180 days tokens, please pay to Tokens for CGDI Prog MB Key Programmer. After you pay for it, can calculate online two times per day too. (to get new authorization for tokens, it will take about 12hours after you pay usd70 to us) 3. If you have CG100 PROG III Airbag Restore Devicesand CGDI Prog BMW MSV80, pls pass us serial number to bundle them together, you will have two more tokens, which means 4 free tokens per day. And if you have CGDI Prog BMW MSV80 only, we can bundle with your CGDI MB too to have one more token per day, which means 3 free tokens each day.
Question: Where to download CGDI MB newest update?
Answer: You can download from here:
http://www.cgprogcar.com/en/?c=list&cs=xiazaizhongxin
CGDI MB Mercedes Benz Key Programmer Newest Update Info (2018-06-02):
1). Add ELV emulator function: support one-click unlock / read & write data / read password.
2). Add ELV password writing directly without erasing EIS and synchronize.
3). Add OBD mileage reset function for the following cluster types:
C(W204) / GLK(X204) / CLK (207) / E(W212) / SLS (197) / CLS (W218), R-Class (W251) /GL(X164) /ML(W164), E-Class (w211) /CLS(W219), S-Class (W221) /CL(216), C-Class (W203) / CLK(W209), SLK(R171).
4). Add the gateway EE /Flash OBD reading and writing for the following gateway types:
C_Class_W204, E_class_W211, E_class_w212, CLK_X204, CLK_W207, SLS_W197, CLS_W218, M-Class_W164, R_class_W251, Slk_R171, GL_X164, S_class_W221, CL_W216.
5). Add the non-HC05 EIS format file and the original data type save function, so that you can complete modifying the Mercedes EIS data by clicking one button.
6). Fix the problem that a partial BE keys fail to read after writing.
7). Add a button to clear the fault code.
8). Fix the problem that a partial changing gear can’t be erased.
Question: what Mercedes Benz models can CGDI MB work with?
Answer: Please read this feedback:
http://www.cgdishop.com/wholesale/cgdi-prog-mb-benz-car-key-programmer.html
Here all CGDI MB operation video on Youtube:
https://www.youtube.com/channel/UC7T5SMnxQEwT01eK0QuhpQw
Q:
Can it supports all keys lost?
A: Yes
– test all keys lost on w164 need gateway.
– Tested w212 ALL KEY LOST !!! In car, done by OBD
Work really good!
W212 is from 2012
Read ezs About 30mins
Upload data
Querry
Password given
Read eis info
Paste key password
Save
Then key calculation
– CGDI MB tool works good to do W207 W204 lost keys on bench.
W204 get data: About hour
PSW W204: 11minute all key lost in bench with VVDI cable
had VVDI and CGDI,CGDI is faster and no problem to get PSW:
– W203 with W209 EZS all keys lost, done in the car about 70mn: Successful.
– Calculation PSW always the first time, never fail.
-Plug USB to computer, software recognizes at once. So I take 2 used BE key put in and read. Software say need 12V.
So I plug 12V and read and reset to unused quickly. Will test on bench W209 as key lost later.
and more……
http://www.cgdishop.com
0 notes
Text
CGDI Prog MB Benz Key Programmer CGDI Mercedes Benz Programmer with Two Free Tokens Every Day
CGDI Prog MB Benz Key Programmer work with new V2.6.0.0 CGDI MB Software. CGDI Mercedes Benz Programmer works with tokens for password online calculation. Gsunlight.com CGDI Prog MB Benz Key Programmer CGDI Mercedes Benz Programmer with Two Free Tokens Each Day. CGDI Mecedes Benz Programmer CGDI Prog MB Benz Car Key Programmer With V2.6.0.0 CGDI MB Software Support All Key Lost
CGDI Mecedes Benz Programmer from gsunlight.com also works with tokens for password online calculation. free two tokens each day for 6 months. What is the token policy for gsunlight.com CGDI Mercedes Benz Programmer: 1. CGDI Prog MB can calculate the password twice free each day for the first 180 days (from the day you activate device) 2. It will cost usd70 for another 180 days tokens, please pay to Tokens for CGDI Prog MB Key Programmer. After you pay for it, can calculate online two times per day too. (to get new authorization for tokens, it will take about 12hours after you pay usd70 to us) 3. If you have CG100 PROG III Airbag Restore Devices and CGDI Prog BMW MSV80, pls pass us serial number to bundle them together, you will have two more tokens, which means 4 free tokens per day. And if you have CGDI Prog BMW MSV80 only, we can bundle with your CGDI MB too to have one more token per day, which means 3 free tokens each day. CGDI Prog MB Benz Key Programmer from gsunlight.com Key Features: 1) Automatically identify the basic key information (including how many times you used SSID) 2) Can directly read pin code of BE keys via infrared, can erase BE keys. 3) NEC adapter can write the original Benz smart key and common key. 4) Can write the Benz original key via infrared. 5) Can restore the data of key and EIS with the key password.
Gsunlight.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center. Contact information:
Website: www.gsunlight.com Email: [email protected] Skype: [email protected] Whatsapp: +86-13691674080
0 notes
Text
CG100 Prog III Update to V6.7.3.0
The newest software of CG100 Prog III is updated to V6.7.3.0 on Aug.29th, 2023.
Here share the related update info and the available mega link to download free.
CG100 PROG III V6.7.3.0 free download link:
Update details:
1.Added 44 models to dashboard.
2.Added 1 models to airbag.
3. Added 5 models to read-write.
The following models are added for dashboard.
Aochi Aochi 1800 STM8S105C6
BYD AUTO Qin EV450 2021- 24C16
Dongfanghong Tractor 2012- 24C02B
DongFeng Dolika D6 2022- 93C86
DongFeng DESK 24C04
DongFeng Captain K6 9S12HY64
DongFeng Captain K6 xingyun 2020- 24C04 (mileage+ Fuel consumption)
DongFeng teshang MPC5606S
Toyota AVALONlion 2022- S6J3001
Toyota PRADO 4500 93C56
FOTON Big Bus 2015- 24C08
FOTON Times lead ES7 2021- 24C08
FOTON kangrui H3 STM8S105C6
FOTON Rowor ES3 2018- 24C08
Trumpchi M6 2020- 24C16
Haima HaiMa S5 2015- 9S12HY64
HEU Forklift 2018- 25040
jichi Tractor 2021- 9S12G48
JAC Refine M3 PLUS 2022- 24C08
JAC Weiling K5 2023- 24C04
JAC M2 24C02
JMC Grandtiger 24C16
JieFang JieFang JH6 24C16
JinBei T50 2022- 24C16
leijun R3 2017- 24C02
LiFan 330EV 2017- 24C02
LiFan HuoChe 2018- 24C02
Liugong Roller 95160
Nezha N01 2019- 24C04
Hitachi DiggerZAXIS120 93C56
Roewe craig EV360 2020- 25160
Roewe RX5 95640
Shaanxi Auto Dragon F3000 2015- 93C66
Subaru Impreza 2016- 93C76
twat compressor 25256(Number of starts + times)
WuLing RC-5 2021- 24C16
ISUZU D-MAX 2022- RH66
XCMG 240flatbed 2018- 25640
Asian Star Bus Bus 25040
Yutong Bus 2020- 9S12XHY256
Yutong Bus MPC5606S (SPC5606SVLU6 SC667585CL)
ChangAn Pickup truck 2020- MPC5606S
ChangAn CS15 2019- 9S12XHY128
CNHTC HOWO hanwo TC2004 2021- R5F10DPEJ
The following models are added for airbag.
Toyota 89170-42D40 R7F701A223
The following models are added for dashboard read-write.
Dayun Dayun Truck MB96F696R (read write)
DongFeng Xiaokang C52 2021- R5F10DPGJ (read write)
Shaanxi Auto Dragon 25LC1024 (read writer)
Shaanxi Auto Dragon X3000 24C64 (read write)
Wuling Kaijie 2020- S6J328CKSP (read write)
0 notes
Text
CGDI CG100/ CG100X Repair BMW FRM3 Module
How to use CG100 Prog III or CGDI CG100X Programmer to repair BMW FRM3 Footwell module?
Check the details below.
The FRM3 Footwell Module is commonly found in the following vehicles:
BMW: E81, E82, E84, E87, E89, E90, E91, E92, E93, E70, E71, E72 series.
Mini: R55, R56, R57, R58, R59, R60, R61 series.
If the FRM module is faulty, you may encounter these issues:
Light switches do not respond.
Windows fail to go up or down.
Some lights, such as parking lights, remain constantly on.
Indicators stop working.
Interior lights fail to turn on.
How to repair FRM Module by CG100/CG100X?
CG100 and CG100X are excellent tools for repairing BMW FRM modules. While other programmers like VVDI Prog can read and write data, CG100 is specifically designed to repair the module.
Here���s a step-by-step guide:
Open the FRM module and remove the circuit board.
Use a special FRM clip adapter to connect the FRM module to the CG100 programmer.
Alternatively, you can use a CG BMW FRM Solder-free Adapter (recommended) or solder wires manually.
Connect the FRM module to the CG100 using the BDM4 adapter.
In the software, navigate to:
BCM>> BMW>> FRM>> E Series>> 9S12XEQ384 (3M25J)
Confirm the connection and press Start to read the data.
Connect a reliable power supply.
Ensure the voltage remains stable and does not drop.
Successfully read the chip’s D-Flash data.
Save and Repair
Turn off the power supply after reading.
Save the data file when prompted.
The CG100 will ask if you want to repair the FRM module—press “Yes”.
The repair process will begin automatically.
Wait for the process to complete. Do not disconnect during the repair.
Write the repaired EEPROM data back to the FRM module.
The FRM3 module will be successfully repaired and ready to reinstall in the vehicle.
Done!
UK Professional OBD2 Tools Online Shop
0 notes
Text
CG100X VW MQB RH850 R7F7014xx Support List and Wiring Diagram
Now CGDI CG100X Programmer can support mileage correction for both Volkswagen MQB 5A and 5C clusters. Check the newest CG100X MQB 5A and 5C dashboard support list and wiring diagram below.
CG100X VW MQB RH850 R7F7014xxDashboard Support List:
R7F701401 (5A and 5C Clusters)
R7F701402 (5A and 5C Clusters)
R7F701407 (5A and 5C Clusters)
R7F701404 (Only 5C Clusters)
R7F701406 (Only 5C Clusters)
Note:
Need to use with D1 adapter and remove capacitors.
CG100X only does mileage function. It will not decode IMMO data.
CG100X V1.5.8.0 added VW MQB R7F701401/ R7F701402/ R7F701407 (5A and 5C Clusters) on Sept. 20th, 2024.
CG100X V1.6.0.0 added VW MQB R7F701404/ R7F701406 (Only 5C Clusters) on Oct.16th, 2024.
Update Info:
Volkswagen MQB adds 2 new R7F7014xx mileage repair models.
Added 28 models to dashboard.
Added 1 model to read-write.
Volkswagen MQBR7F7014xx supports the following models.
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701404 (Only 5C Meters)
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701406 (Only 5C Meters)
The following models are added for dashboard.
Dayun winning STM32F103VE
Dayun Zhengtu STM32F103VE
Dayun V9 24C64
Dayun Light Truck xianglong 9S12HY48
Dongfanghong Tractor 24C04
DongFeng DFSK K02L 24LC04
DongFeng Captain 24C256
DongFeng Huashen T3 R5F10TPxxx
DongFeng RuiChi 24C02
FJMOTOR Keyton M70 9S12HA32
FOTON Auman 95640 (Working+Idle duration)
Valley King 80S 25040 (25LC04) (working time)
Valley King 80S 25040 (25LC04) (mileage)
Valley King 80S 25040 (25LC04) (Travel time)
Guangtong auto Box transport vehicle 24C16
Guangtong auto 7-meter highway CAT1023
HaoJue motorcycle MB96F673A
Geely Long RangeE200 9S12ZVH128
Geely Long RangeEL6 25LC1024
JAC Kangling 2024- 24C16
JAC KAIDA 24C16
JAC Kaida X5 2024- 24C08
JMC Elushun 25256
JieFang Hanwei X5043
JINPENG T90 24C02
JOYLONG DAMA X5043
LEVDEO I5 R5F10xxx
Shaanxi Auto Dragon K3000 24C08 V2
The following models are added for dashboard read-write.
Suzuki Ertiga 93C76 (read write)
CG100 Prog III V7.0.8.0 added the same car models as CG100X V1.6.0.0 to the dashboard and dashboard read-write. But it doesn’t support VW MQB mileage correction.
Learn more update info about CGDI CG100X VW MQB Mileage Repair:
CGDI CG100X and VW MQB R7F7014xx 5C Cluster Wiring Diagram:
R7F701401
R7F701402
R7F701407
R7F701404
R7F701406
0 notes
Text
CGDI CG70 Airbag Reset Tool Important Info Introduction
CGDI CG70 Airbag Reset Tool can clear fault codes one key no welding no disassembly! Here is some important info that you need to know. Check the details below.
1.CGDI CG70 Airbag Reset Software Download (V1.1.1.0):
2.CGDI CG70 Package
The package needs to be smaller and lighter. The plastic suitcase is too expensive for shipping.
3.CGDI CG70 Vehicle Coverage
Download CGDI CG70 Airbag Reset Tool Car List
If you want to check the newest car list, please update CGDI CG70 software to V1.1.1.0 (newest) to check.
4.CGDI CG70 Annual Fee
The Annual fee is free now, no need to care about the device service end date in the software.
If it shows “The current product has not yet been established”, just click “OK” and run the software normally.
5.Tips to connect CG70 and airbag ECU
1.Please place the airbag computer label face up on the workbench (as shown in the picture) before repairing.
2.After repairing, please leave it for a few minutes to wait for the capacitor to fully discharge before carrying out other operations.
6.CG70 supports multiple diagranostic protocols
CAN protocol, K/L protocol, SWCAN protocol and J1850 protocol, compatible with different car models and airbag modules.
Terminal wires of different thickness
7.CG70 can do encrypted chip while CG100X cannot
8.CGDI CG70 and CGDI CG100X support different functions
CG Tech can add many types of diag only, but it seems it is useless, so they gave up. They will update more functions in the future.
1.CG70 can read out different size with CG100, so the file cannot be mixed. If the data size is same, then you can try to mix it. The data read out by CGDI CG70 can be used to clear the crash manually.
2.If you see the airbag ECU model you want in the CG70 software shows “internal testing”, it means this airbag model is still tested.
9.CG70 has lots of airbag PINOUT diagrams
It may have many Pinout for the same part number airbag models. You can try one by one.
10.If some car models still have crash after repair, they need to be dismantled for repair.
Use CG100 Prog III/CGDI CG100X Programmer to read out the data, and send the data to CG tech support to fix.
11.Some airbag ECU models require resistor 1KΩ
When performing [Auto Repair] and [Clear Crash] functions, some airbag ECU models like Hyundai 95910-1R000, 1R050, 1R100, 1R150, 1R200, 1R210, 1R220, 1R250, 1R300, 1R350, 1R450, 1R550, etc need to connect a 1KΩ resistor to the airbag ECU according to the [ClearCrash_info] diagram.
12.Volvo XC90 TMS570
Since Volvo’s new airbag ECU stores collision memory after a vehicle accident, it is difficult for common programmers to reset it successfully, which makes the maintenance very troublesome. Common programmers will cause ECU internal U3000-xx unerasable fault.
13.TOYOTA Steering Angle Sensor
SAS Calibration:
The steering wheel needs to be turned to the left, then to the right, and then back to the center, calibration zero point steering angle position sensor on Toyota, Scion and Lexus (for part of cars).
14.Volve 48V lithium battery
Applied to the fault phenomenon of vehicle failure to charge or start after collision accidents.
CGDI CG70 Airbag Reset Tool:
0 notes
Text
How to fix CGDI “Software is Unauthorized”?
Recently, some customers gave feedback that CGDI device (CGDI MB, CG100/CG100X, CG FC-200…) had subscription update problem. They purchased the update service, but the software prompted “Software is unauthorized and cannot be used…”.
Here is the solution:
The main cause is that CG server has some issues.
It can be solved with the following operation.
Click the icon at the upper corner of software main page (see the image below)
Select Server Connection>> Mainland China
Restart the software, it should be fine.
If the software subscription expires, order the related subscription.
CG FC200 ECU Programmer One Year Update Service (€194):
CG100/ CG100X One Year Update Service (€86):
Tech support:
Email: [email protected]
WhatsApp: +86 159 7293 3706
Skype: Eobdtool.co.uk
Business Time: Monday – Friday, 8:30am – 6:00pm CST (UTC/ GMT+08:00)
0 notes
Text
CGDI CG70 vs. CG100 Prog III vs. CG100X
CGDI CG100X is a new generation smart car programmer. It’s the upgrade version of CG100 Prog III. It also supports airbag reset function. We’ve compared them and CG70 Airbag Reset Tool. Let’s learn more details from the comparison table.
CGDI CG100 vs. CG100X vs. CG70:
In conclusion:
Similarities among CG100, CG100X and CG70:
The annual fee and language among all three devices are the same.
All support airbag repair function.
CG100X Programmer better than CGDI CG100 as follows:
Has an 8 -foot removal of adapter;
Support Body failure repair and BMW Land Rover writes key;
Support CAN line communication;
Support more chips incl. MQB NEC35xx chips. Keep pace with the times, and have strong new MCUs;
The adapter is upgraded.
0 notes
Text
CGDI CG70 vs. CG100 Prog III vs. CG100X
CGDI CG100X is a new generation smart car programmer. It’s the upgrade version of CG100 Prog III. It also supports airbag reset function. We’ve compared them and CG70 Airbag Reset Tool. Let’s learn more details from the comparison table.
Learn more: http://blog.eobdtool.co.uk/cgdi-cg70-vs-cg100-prog-iii-vs-cg100x/
0 notes
Text
V6.1.3.0 CG100 PROG III Auto Computer Programmer Airbag Restore Devices including All Function of Renesas SRS
CG100 PROG III Highlights: 1. lIncluding All Function of Renesas SRS 2. Support read and write EEPROM, support non-secure BMW DDME ECU microcontroller. 3.CG100 PROG III with built-in calculator, support calculate ISN, VIN and program CRC EEPROM 4. CG100 PROG III now support CAS3 CAS3+CAS4 CAS4+ Key Programming 5. CG100 PROG III now can splite the quality for CAS Data 6. Cover all function of CG100
Learn more:https://www.eobdtool.co.uk/wholesale/cg100-prog-iii-airbag-restore-devices.html
0 notes
Text
V6.5.2 CG100 Prog III Full Version Airbag Restore Device including All Functions of Renesas SRS and Infineon XC236x FLASH
#cg100 #cg100prog3 #cg100full #airbagrestore #airbag #cgdicg100
whatsapp:+8615886576826
0 notes