#BantamX
Explore tagged Tumblr posts
vividracing · 1 year ago
Photo
Tumblr media
New Post has been published on https://www.vividracing.com/blog/the-best-lighting-solution-for-all-off-road-vehicles-by-baja-designs/
The Best Lighting Solution For All Off-Road Vehicles By Baja Designs
If your offroad vehicle is running on more than three light switches to control your lights, for safety, simplicity, and a million other reasons we recommend that you use a power distribution system. We mean like those made by sPOD, which has moved the manufacturing in-house to Baja Designs (a leader in the off-road lighting industry for over 25 years) in San Marcos, CA. Their advanced electronic control unit is trail-rated and race-proven, perfectly made for offroad vehicles, and works well for anything with a battery including agricultural equipment, utility vehicles, race rigs, and more. These systems are customizable, simple, and powerful, have a variety of safety features, and have fewer wires.
With the switch panel and the solid-state control module, as the two main components of the sPOD system, the systems are easier than ever to install. All you do is wire your positive and negative wire to the power control module, and with one Ethernet cable going to the switch controller, voila, no extra tools, or wasting many hours on a forum trying to learn how to set it up. sPOD offers two powerful and space-saving switch panel power systems: the BantamX, an eight-circuit system, and the six-circuit system SourceLT.
Both of these solid-state technology units offer a centralized means of managing and controlling auxiliary 12V electrical accessories on off-road vehicles. They each utilize a solid-state board and one main fuse as they provide a continuous power flow of up to 100 amps and feature up to six/eight circuits in total, rated at 30 amps. The system not only comes with a 5-year manufacturer defect warranty but also a variety of safety features that help to protect against electrical faults, such as a low-voltage cutoff feature that prevents damage to the battery by shutting off the electrical components. If the battery drops below 11.6V, after two minutes, the Bantam will shut down.
For more freedom to program and control the system from any wireless device, both the sPOD BantamX and SourceLT units come equipped with built-in Bluetooth technology. On top of that, you can control features such as output dimming, strobing, flashing, memory, auto power-up, momentary settings, input, and more through the app. If you are still not yet convinced that you need this system, you should know that we see many people use sPOD as a switch controller for 12V electrical components including winches, air compressors, and lockers (although you should be careful with the circuit load as the amps typically pull 50-70 amps).
Features:
Centralized Control: sPOD offers a centralized means of managing and controlling auxiliary 12V electrical components on off-road vehicles, providing a single point of control for all your accessories.Solid-State Technology: Both the BantamX and SourceLT units utilize a solid-state board, providing a continuous power flow of up to 100 amps, and featuring up to eight circuits in total, rated at 30 amps each.
Customizability: The Touch Panel allows for a wide variety of customization, including linking up to four BantamX units for a total of 36 switches controlled by one panel.
Safety Features: The sPOD system includes a variety of safety features that help to protect against electrical faults, such as a low-voltage cutoff feature that prevents damage to the battery by shutting off the electrical components.
Warranty: sPOD backs up their products with a 5-year manufacturer defect warranty, giving customers peace of mind knowing they’re purchasing a reliable product.
The BantamX
The BantamX non-switch panel system is a small, 8-circuit (expandable) control system that provides a clean and safe way to power and controls 12/24VDC accessories. With built-in Bluetooth capabilities for remote control, the BantamX is also designed to be paired with the sPOD™ app on your phone or tablet, saving hours of wiring & installation time. The BantamX comes standard with the TouchHD, which gives that tactile feedback many people love. But if you are looking to really customize your setup at the touch of your fingertips, the Touch Panel is also available, which allows for a wide variety of customization and even linking up to four BantamX units for a total of 36 switches controlled by one panel.
The 84″ setup includes the following:
(1) BantamX System (1) 84″ Battery Cable Set (1) Universal Mounting Bracket All necessary hardware
Specifications for the BantamX:
30 amps at 12.5 VDC per circuit
16-position terminal block
2 controller ports (RJ45) for Ethernet cables
Integrated low voltage cutoff battery protection w/ optional override
100 amp in-line fuse
Operates on 12 VDC or 24 VDC
Built-in Bluetooth capabilities for remote control
CLICK HERE to buy the Baja Design 84″ Spod BantamX Non-Switch Panel
To buy the Baja Design 36″ Spod BantamX Non-Switch Panel – CLICK HERE
The SourceLT
The SourceLT non-switch panel system is a small, solid-state 6-circuit control system that provides a clean and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless, and there’s no cutting, fishing wires into the cab or tapping into the vehicle’s electrical system. Just like BantamX, this system has built-in Bluetooth capabilities for remote control and is also designed to be paired with the sPOD™ app on your phone or tablet, saving hours of wiring & installation time.
The 84″ setup includes the following:
(1) SourceLT System (1) 84″ Battery Cable Set (1) Universal Mounting Bracket All necessary hardware
Specifications for the SourceLT:
6 circuits rated at 30 amps at 12.5 VDC per circuit
12-position terminal block
Integrated low voltage cutoff battery protection w/ optional override
100 amp in-line fuse
Operates on 12 VDC or 24 VDC
Built-in Bluetooth capabilities for remote control
To purchase the Baja Design 36″ Spod SourceLT Non-Switch Panel – CLICK HERE
CLICK HERE to buy the Baja Design 84″ Spod SourceLT Non-Switch Panel
1 note · View note
jsalternators · 3 years ago
Video
instagram
@tacomakoma Locked and Loaded ... BUILD LIST: @kingshocks -front long travel coilover @kingshocks - secondary bypass shocks @totalchaosfabrication -long travel suspension @kingshocks -Bump Stops @fueloffroad- fuel 17x9 Zephyr Beadlock D101 @nitrogears - 5.29 gear ratio front/rear @nittotires - 35x12.5/17 @cbioffroadfab - bed rack @deaver_suspension_inc - Deaver 2 springs @kingshocks - 2.5 x 10” rear shocks @frontrunneroutfitters -roof rack @garmin- overlander navigation system @midlandusa- MXT 275 micro mobile radio @jmobiletint_orlando PPF Paint Clear wrap @rcioffroad - RCI Rocksliders @rcioffroad - RCI aluminum skid plates @s&bfilters - air intake @arb4x4usa - safari snorkel @arb4x4usa - front air diff lockers @arb4x4usa - ARB differential breather kit @arb4x4usa - ARB Onboard twin compressor @arb4x4usa - ARB elements fridge/freezer @arb4x4usa - ARB TRED Pro Recovery boards @jamesbaroudofficial - rooftop tent Grand Raid @jamesbaroudofficial - Falcón awning 270 @roamadventureco - storage cases @warnindustries- frontwinch Warn 12s platinum @warnindustries - rearwinch Warn VR EVO 10 @rigidindustries - 40” Rigid Adapt light bar @rigidindustries - Radiance 30in Blue @kchilites - Rock lights @marlincrawler - HD (LCA) Frame Brace Kit @camburgracing - steering heim clevis & tie rod @407dynopro - custom 3/4” heavy duty tie rod @rcvperformance - Axle All Pro Long Travel @ss_orrfroad - SLIMLINE TUBE BUMPER @4x4spod - SPOD BANTAMX @snorkelupgrade - precleaner @powerbrake.official -X-Line 4x4 Big Brake Kit @c4_fabrication - Overland series HC Rear bumper #overlanding #toyotamafia #yotatribe #yotalife #toyota #tacoma #toyotatacoma #4runner #trdpro #tundratacoma #trd #yota #yotanation #toyotafreaks #overlandlife #toyotatribe #4x4 #build #thetoyotalife #yotafreaks #yotanation #offroad #tacomaforce #tacomaworld #trdoffroad #tread_magazine #toyotagram #trdflorida #modified #toyota4wd #adventure https://www.instagram.com/p/CUc3MdvFoxs/?utm_medium=tumblr
3 notes · View notes
vividracing · 1 month ago
Photo
Tumblr media
New Post has been published on https://www.vividracing.com/blog/2024-tacoma-trd-baja-designs-x-spdo-pro-grille-kit/
2024 Tacoma TRD Baja Designs x sPDO Pro Grille Kit
The 2024 Toyota Tacoma features a bold new design and enhanced performance. To elevate its appearance and safety, Baja Designs offers various LED lighting solutions. Including fog pocket replacements, ditch lights, and reverse lights; all designed for a seamless fit. These lights improve visibility and driving enjoyment, whether on desert roads or forest trails. Each kit ensures a clean installation and is supported by a 30-day satisfaction guarantee and a limited lifetime warranty for added peace of mind. 
The sPOD BantamX HD Vehicle-Specific Kit for the 2024+ Toyota Tacoma is designed to seamlessly integrate the sPOD HD control panel into the vehicle’s cabin, providing a centralized and convenient location for accessory controls. This kit is compatible with all Toyota Tacoma trim models, ensuring that controls are always within arm’s reach. It features the BantamX power module, which offers eight power circuits, each supporting 30A per channel and a total of 100A. 
Additionally, the kit includes sPODConnect Bluetooth technology, allowing users to program and control their accessories from any iOS or Android device via the sPOD app. It also features integrated LVCO low-voltage cutoff battery protection, which monitors and protects the vehicle’s electrical system to ensure reliability. 
Below are some of the many options that Baja Designs has recently released for 2024 Toyota Tacoma owners to elevate their ride from stock to shocking! Check it out below and don’t forget to shop through our website for the best deals on all 2024 Toyota Tacoma TRD Deals! 
BantamX Upfitter Power Management Vehicle Kit 
Specifically engineered to combine the factory upfitter switches and aftermarket capability. Offering 8 power circuits to deliver adequate power. With additional control from the touch of your fingertips that allows you to dim, strobe, flash, and many other options for lights for you to ride worry-free and take control!
Key Features: 
Use your OEM upfitter switches to trigger the BantamX
Increase amp rating across OEM switches to 30A
Gain five extra switches 
Bluetooth functionality 
5-year manufacturer warranty 
Shop Here! 
HD/BantamX Power Management Vehicle Kit
The sPOD BantamX HD vehicle-specific kit is designed seamlessly for the new Tacoma. Easy access to accessory controls from the cabin allows the driver to feel in control of each power circuit. This product also has scalability options to expand up to 32 channels controlled by a single unit. 
Key Features: 
Installs effortlessly 
8 circuits to power accessories 
Bluetooth connectivity 
Programming options (dimming, strobing, flashing, memory, switch linking, and more) 
Battery protection 
Backlighting 
Multi-controller compatibility 
Shop Here!
S8 10-inch / S2 Pro Grille Light Kit 
With some slight trimming, you can be the new grille master of your neighborhood! Baja Designs is now introducing the Grille Light Kit that features both clear or amber lights. The dual wiring harnesses allow separate control for optimal zone illumination. 
Key Features: 
Powerful lighting 
Dual functionality 
Wide coverage 
Amber backlight
Easy installation 
uService Technology to swap out lenses and adjust beam patterns without voiding warranty
Shop Here!
There are so many more upgrades that Baja Designs has carefully and strategically manufactured to make the best upgrade for your 2024 Toyota Tacoma TRD! The time is now to build out your truck! With more upgrades including a reverse kit, llinkable roof kit, pillar kit, and more! Shop all these great modifications and more at www.vividracing.com ! 
1 note · View note
vividracing · 1 year ago
Photo
Tumblr media
New Post has been published on https://www.vividracing.com/blog/new-baja-designs-hd-bantamx-kit-mercedes-sprinter-van/
NEW - Baja Designs HD BantamX Kit Mercedes Sprinter Van
Baja Designs has been on fire lately with their latest releases. For a 2022-2023 Polaris Pro R, they recently released a Steering Wheel Mount Kit, and in the same breath, they released a HD BantamX Kit for a 2019-2023 Mercedes Sprinter Van. This sPOD BantamX/HD vehicle-specific kit was designed to provide the perfect command center to control all of your accessories. The Mercedes sprinter van is one of those vehicles with good engine performance and car handling, that van paired with the Baja Designs’ HD BantamX Kit, will be a functional upgrade which will protect your van’s electrical system.
Designed with the perfect angle to help you access switches easily, the HD BantamX Kit is so easy to install with no cutting needed. The HD Bantam X has touch feedback buttons, Bluetooth pairing/connectivity, and Backlit feature making it the best solution for your Sprinter van’s 12/24VDC electrical accessories
Setup Includes:
(1) BantamX System
(1) 84″ Battery Cable Set
(1) HD Switch Panel
(1) 10′ Ethernet Cable
(2) Mounting Bracket
All necessary hardware
Features:
8 circuits rated at 30 amps at 12.5 VDC per circuit
16-position terminal block
2 controller ports (RJ45) for Ethernet cables
Integrated low voltage cutoff battery protection w/ optional override
100 amp in-line fuse
Operates on 12 VDC or 24 VDC
Built-in Bluetooth capabilities for remote control
Fitment:
Mercedes Sprinter Van 2019-2023
Click Here to Buy Baja Designs’ HD BantamX Kit for Mercedes Sprinter Van 2019-2023
0 notes