#Abrex 500 Plates Exporters

[chhajedsteelplates]

Abrex 500 Equivalent Plates Stockist

Abrex 500 is a wear resistant plate series form NSSMC.

The usage of scratched area square ABREX 500 steel plate especially decreases the mass of extra parts seemed to serve beating conditions. Bundle and clear steel, ABREX steel plate diminishes key weight and passes on money related central concentration premiums. Request of first rate scratched an area safe ABREX 500 will surrender the assistance life of mechanical gathering and part.

ABREX 500 is through created scratched zone safe steel with a regular hardness of 515 BHN. ABREX 500 PLATES are the most wide used of the wear safe assessments. ABREX 500 plate exhibit a staggering mix of high affirmation from impact, handiness, weld cutoff and check from scratched a zone. ABREX 500 plate has around 3 times the scratched spot prospering of trustworthy steel plate and helps drawing out the association presence of mechanical parts.and ABREX 500 from 05mm ~ 50mm thickness.

SPECIFICATION ABREX 500

   Size: 5mm ~ 120 mm    Width: Up to 3000 mm    Length: Up to 12000 mm

APPLICATION

   Dump Truck Liners    Forefronts    Drag line Bucket Wear Liners    Screen Plates - Chute Liners    Transport Buckets    Holders    Mineral Scrapers

For more information:

Call us on: 932-111-3630

Visit our website: https://www.chhajedplates.com/

Email us: info@chhajedsteel.com

[chhajedabrex]

Abrex 500 Sheet Plates Suppliers in India

Abrex 500 is a wear safe plate plan structure NSSMC.Vandan Steel & Engg. co. always wears down upgrading its creation system to offer amazing and staggering things. Our consistent search for advancement and quality has provoked us making Abrasion Resistant 500 Steel Plates, which rebuff wear too.

The utilization of scratched spot check ABREX 500 steel plate particularly diminishes the greatness of helper parts displayed to serve granulating conditions. Distinction and dependable steel, ABREX steel plate lessens helper weight and passes on financial points of interest. Assurance of world-class scratched spot safe ABREX 500 will delay the association life of contraption and part.

ABREX 500 is through set scratched zone safe steel with a standard hardness of 515 BHN. ABREX 500 PLATES are the most all things considered utilized of the wear safe appraisals. ABREX 500 plate demonstrate a surprising blend of high assurance from impact, convenience, weld cutoff and insurance from scratched spot. ABREX 500 plate has around different occasions the scratched spot security of fundamental steel plate and helps drawing out the association life of mechanical parts.and ABREX 500 from 05mm ~ 50mm thickness.

They are unreasonably firm, with a hardness of 500 HBW they can withstand an impact control from gigantic rocks. Open in varieties like ABREX 500, SUMIHARD 500 and ROCKSTAR 500, our mileage AR 500 Steel plates affirmation creation of magnificent, light – weight yet machines that bear high scratched spot.

ABREX 500 STEEL PLATE SPECIFICATION

Thickness: 5mm to 150mm Width: 1,500mm to 2,500mm Length: 6,000mm to 12,000mm Heat Treatment: N, Q+T Surface Paint: EP, PE, HDP, SMP, PVDF Material: ABREX 500 Plate, SUMIHARD k500 Steel Plate, DILLIDUR 500V Steel Plate, Essar Rockstar 500 Abrasion Resistant Steel Plates.

[wearplatesindia]

Abrex 500 is a wear resistant plate series form NSSMC.

Abrex 500 Manufacturers, Abrex 500 Manufacturers in India, Abrex 500,abrex 500 Suppliers,abrex 500 Stockists, Abrex 500 Exporters,abrex 500 Traders,abrex 500 Dealers, Abrex 500 Importers, Authorised Distributors Of Abrex 500, Authorised Exporters Of Abrex 500,authorised Traders Of Abrex 500, Authorised Importers Of Abrex 500,autorised Suppliers Of Abrex 500. Abrasion Resistant Abrex 500 Steel Plate, Abrex 500 Sheets Supplier, High Tensile Strength 500 Abrex Plates, En 10051 Abrex 500 Hot Rolled (hr) Plates, 500 Abrex High Tensile Plates Exporter India

The utilization of abrasion resistance ABREX 500 steel plate particularly lessens the weight of structural parts presented to serve grating conditions. Contrast and consistent steel, ABREX steel plate decreases structural weight and conveys monetary benefits. Selection of elite abrasion resistant ABREX 500 will delay the administration life of apparatus and part.

[comstrations]

ABREX 500 PLATES

Abrex 500 Sheet Plates, Abrex 500 Sheet Plates Suppliers, Abrex 500 Sheet Plates Exporters, Abrex 500 Sheet Plates Importers, Abrex 500 Sheet Plates Authorized Distributer, Abrex 500 Sheet Plates Dealers, Abrex 500 Sheet Plates Stockists,AR 500 Hot Rolled Plates, Nicrodur 500 Plates, High Quality Raex 500 Plates, WeAR Resistant Abrex 500 Plates, Abrasion Resistant 500 Steel Plates, Abrex 500 Plates Suppliers, Abrex 500 Plates Stockist In Mumbai, India.

Abrex 500 Sheet Plates In Mumbai, Abrex 500 Sheet Plates Suppliers In Mumbai, Abrex 500 Sheet Plates Exporters In Mumbai, Abrex 500 Sheet Plates Importers In Mumbai, Abrex 500 Sheet Plates Authorized Distributer In Mumbai, Abrex 500 Sheet Plates Dealers In Mumbai, Abrex 500 Sheet Plates Stockists In Mumbai,Abrex 500 Plates Dealer, Abrex 500 Sheet And Plate Exporter, Bhn 500 Plates, High Strength Abrex 500 Plates, Abrex 500 Cold Rolled Plates, Abrex 500 Plates Supplier In Mumbai, India.

Abrex 500 Sheet Plates In India, Abrex 500 Sheet Plates Suppliers In India, Abrex 500 Sheet Plates Exporters In India, Abrex 500 Sheet Plates Importers In India, Abrex 500 Sheet Plates Authorized Distributer In India, Abrex 500 Sheet Plates Dealers In India, Abrex 500 Sheet Plates Stockists In India,Abrasion Resistant Abrex 500 Steel Plate, Abrex 500 Sheets Supplier, High Tensile Strength 500 Abrex Plates, EN 10051 Abrex 500 Hot Rolled (HR) Plates.

https://abrexplate.com/abrex-500-suppliers-exporters-importers-distributers-dealers-stockists.html

[diptimetals]

Abrex 500 Sheet Plates, Abrex 500 Sheet Plates Suppliers, Abrex 500 Sheet Plates Exporters, Abrex 500 Sheet Plates Importers, Abrex 500 Sheet Plates Authorized Distributer, Abrex 500 Sheet Plates Dealers, Abrex 500 Sheet Plates Stockists,AR 500 Hot Rolled Plates, Nicrodur 500 Plates, High Quality Raex 500 Plates, WeAR Resistant Abrex 500 Plates, Abrasion Resistant 500 Steel Plates, Abrex 500 Plates Suppliers, Abrex 500 Plates Stockist In Mumbai, India.

Abrex 500 Sheet Plates In Mumbai, Abrex 500 Sheet Plates Suppliers In Mumbai, Abrex 500 Sheet Plates Exporters In Mumbai, Abrex 500 Sheet Plates Importers In Mumbai, Abrex 500 Sheet Plates Authorized Distributer In Mumbai, Abrex 500 Sheet Plates Dealers In Mumbai, Abrex 500 Sheet Plates Stockists In Mumbai,Abrex 500 Plates Dealer, Abrex 500 Sheet And Plate Exporter, Bhn 500 Plates, High Strength Abrex 500 Plates, Abrex 500 Cold Rolled Plates, Abrex 500 Plates Supplier In Mumbai, India.

Abrex 500 Sheet Plates In India, Abrex 500 Sheet Plates Suppliers In India, Abrex 500 Sheet Plates Exporters In India, Abrex 500 Sheet Plates Importers In India, Abrex 500 Sheet Plates Authorized Distributer In India, Abrex 500 Sheet Plates Dealers In India, Abrex 500 Sheet Plates Stockists In India,Abrasion Resistant Abrex 500 Steel Plate, Abrex 500 Sheets Supplier, High Tensile Strength 500 Abrex Plates, EN 10051 Abrex 500 Hot Rolled (HR) Plates.500 Abrex High Tensile Plates Exporter India,500 Abrex WeAR Resistant Steel Plates Manufacturer, EN 10051 Abrex 500 Plate & Sheets Supplier, Abrex 500BHN Steel Plates, Abrex 500 High Yield Structural Steel Plate Stockholder, Abrex 500 WeAR Resistance Plates In India.

Abrex 500 is a wear safe plate plan structure NSSMC.Conquest Steel and Alloys always wears down upgrading its creation system to offer amazing and staggering things. Our consistent search for advancement and quality has provoked us making Abrasion Resistant 500 Steel Plates, which rebuff wear too.

The utilization of scratched spot check ABREX 500 steel plate particularly diminishes the greatness of helper parts displayed to serve granulating conditions. Distinction and dependable steel, ABREX steel plate lessens helper weight and passes on financial points of interest. Assurance of world class scratched spot safe ABREX 500 will delay the association life of contraption and part.

ABREX 500 is through set scratched zone safe steel with a standard hardness of 515 BHN. ABREX 500 PLATES are the most all things considered utilized of the wear safe appraisals. ABREX 500 plate demonstrate a surprising blend of high assurance from impact, convenience, weld cutoff and insurance from scratched spot. ABREX 500 plate has around different occasions the scratched spot security of fundamental steel plate and helps drawing out the association life of mechanical parts.and ABREX 500 from 05mm ~ 50mm thickness.

They are unreasonably firm, with a hardness of 500 HBW they can withstand an impact control from gigantic rocks. Open in varieties like ABREX 500, SUMIHARD 500 and ROCKSTAR 500, our mileage AR 500 Steel plates affirmation creation of magnificent, light – weight yet machines that bear high scratched spot.

ABREX 500 STEEL PLATE SPECIFICATION

Thickness : 5mm to 150mm Width : 1,500mm to 2,500mm Length : 6,000mm to 12,000mm Heat Treatment : N, Q+T Surface Paint : EP, PE, HDP, SMP, PVDF Material : ABREX 500 Plate, Hardox 500 Plate, SUMIHARD k500 Steel Plate, DILLIDUR 500V Steel Plate, Essar Rockstar 500 Abrasion Resistant Steel Plates.

[allloyplates]

Abrex 500 Plates Manufacturers, Abrex 500 Plates Suppliers, Abrex 500 Plates Stockists, Abrex 500 Plates Exporters

Abrex 500 Plates Manufacturers in India, Abrex 500 Plates Suppliers in India, Abrex 500 Plates Stockists in India, Abrex 500 Plates Exporters in India

Abrex 500 Plates might be a progression of wear-safe edges from NSSMC.

Abrex 500 Plates might be a steel used in scratch-safe regions, with a regular hardness of 515 BHN. Abrex 500 Plates board the chief broadly utilized Abrex 500 Plates board gives a magnificent blend of effect obstruction, functionality, welding cut and scratch testing. a combination of mechanical parts and Abrex 500 Plates with a thickness of 05mm~50mm.

SPECIFICATION Abrex 500 Plates

   Size: 5mm ~ 120 mm    Width: Up to 3000 mm    Length: Up to 12000 mm

[allloyplates]

[allloyplates]

Abrex 500

The usage of scratched Abrex 500 Plates square steel plates can lessen the norm of extra parts that show up most ideal. Focal Fixation Grant. Abrex 500 Plates doesn't need mechanical hold and a piece of the help life inside the protected region with extraordinary prerequisites for scratches.

Abrex 500 Plates might be a progression of wear-safe edges from NSSMC.

Abrex 500 Plates might be a steel used in scratch-safe regions, with a regular hardness of 515 BHN. Abrex 500 Plates board the chief broadly utilized Abrex 500 Plates board gives a magnificent blend of effect obstruction, functionality, welding cut and scratch testing. a combination of mechanical parts and Abrex 500 Plates with a thickness of 05mm~50mm.

SPECIFICATION Abrex 500 Plates :

   Size: 5mm ~ 120 mm    Width: Up to 3000 mm    Length: Up to 12000 mm

APPLICATION :

   Dump Truck Liners    Forefronts    Drag line Bucket Wear Liners    Screen Plates - Chute Liners    Transport Buckets    Holders    Mineral Scrapers

For more information :

Visit our website : https://www.alloyplates.com/abrex-500-manufacturers-suppliers.html

Contact Us : +91-7506020637

Email Id : saisteelengg@gmail.com

[allloyplates]

Abrex 500 Steel Plates Exporters

The usage of scratched Abrex 500 Plates square steel plates can lessen the norm of extra parts that show up most ideal. Focal Fixation Grant. Abrex 500 Plates doesn't need mechanical hold and a piece of the help life inside the protected region with extraordinary prerequisites for scratches.

Abrex 500 Plates might be a progression of wear-safe edges from NSSMC.

Abrex 500 Plates might be a steel used in scratch-safe regions, with a regular hardness of 515 BHN. Abrex 500 Plates board the chief broadly utilized Abrex 500 Plates board gives a magnificent blend of effect obstruction, functionality, welding cut and scratch testing. a combination of mechanical parts and Abrex 500 Plates with a thickness of 05mm~50mm.

[chhajedsteelplates]

[chhajedabrex]

Abrex 450LT  Plates

Abrex 450LT Steel Plates In Mumbai, Abrex 450LT Steel Plates Suppliers In Mumbai, Abrex 450LT Steel Plates Exporters In Mumbai, Abrex 450LT Steel Plates Importers In Mumbai, Abrex 450LT Steel Plates Authorized Distributer In Mumbai, Abrex 450LT Steel Plates Dealers In Mumbai, Abrex 450LT Steel Plates Stockists In Mumbai,AR 450 BHN Plate, ABREX 450 HBW Plates, ABREX 450LT Plates Stockholders, Low-Temperature ABREX 450 Steel Plates Dealer, Abrex 450 Liner Plates Distributors In Mumbai.

Abrex 450LT Steel Plates In India, Abrex 450LT Steel Plates Suppliers In India, Abrex 450LT Steel Plates Exporters In India, Abrex 450LT Steel Plates Importers In India, Abrex 450LT Steel Plates Authorized Distributer In India, Abrex 450LT Steel Plates Dealers In India, Abrex 450LT Steel Plates Stockists In India,Abrex 400 Wear Resistant Sheet Plates, Sumihard 500 Wear Resistant Sheet Plates And Sumihard 450 Abrasion Resistant Sheet, Abrex 600 Wear Resistant Sheet Plates Manufacturer In Mumbai, India.

Our Abrex 450lt plates are scratched spot safe and can be used in commanding working environments reasonably. We devise our things to give them precision finishing, which ensures that they offer astonishing utility in all circumstances of use. These things are worked with the end goal that they last longer than standard delicate steel types.

The Abrex plates unite properties, for instance, hardness, quality and durability to offer surprising utility. Abrex 450lt plates can be cut, welded and formed using standard workshop practices suitably. We offer things in an extent of customizable choices like size, thickness, and finishing to satisfy customer needs.

The usage of scratched region deterrent ABREX 450lt Plates quite lessens the weight of helper people introduced to serve harsh conditions. Complexity and typical steel, ABREX steel plate diminishes fundamental weight and passes on fiscal advantages.Gathering of unrivaled scratched region safe ABREX will haul out the organization life of mechanical assembly and portion.

ABREX 450LT STEEL PLATE SPECIFICATION

Thickness : 6mm to 100mm Width : 1,500mm to 2,500mm Length : 6,000mm to 12,000mm Production : Hot-Rolled (HR) / Cold-Rolled (CR) Heat Treatment : N, Q+T Surface Paint : EP, PE, HDP, SMP, PVDF Material : ABREX 400, AR 400 Steel Plate, ABREX 400 Abrasion Resistant Steel Plates, ABREX 400 Wear Resistant Plates

ABREX 450LT CHEMICAL COMPOSITION

C *)

Si *)

Mn *)

P

S

Cr *)

Ni *)

Mo *)

B *)

Max %

Max %

Max %

Max %

Max %

Max %

Max %

Max %

Max %

0.26

0.7

1.6

0.025

0.01

1.40

1.50

0.6

0.005

MECHANICAL PROPERTIES OF ABREX 450LT STEEL PLATE

Thickness

Hardness HBW

Typical yield strength MPa,

mm

min - max 1)

not guaranteed

3 - 80

425 - 475

1100 - 1300

(80) - 100

410 - 475

1050 - 1300

(100) - 130

390 - 475

1000 - 1300

Thickness mm

-5

5 - (10)

10 - (20)

20 - (40)

40 - 80

(80) - 130

CET (CEV) Max

0.37 (0.48)

0.38 (0.49)

0.39 (0.52)

0.41 (0.60)

0.43 (0.74)

0.41 (0.67)

CET (CEV) Typical

0.29 (0.39)

0.33 (0.45)

0.36 (0.48)

0.38(0.56)

0.38 (0.61)

0.39 (0.64)

For More Information:

Visit Our Website: https://www.abrexplate.com

Contact No:   022-23893665

E-Mail ID:  info@vandansteel.com

[wearplatesindia]

Abrasion Resistance Plate Stockists

Abrasion resistant steel is used every bit as a part of regions where there is prone to be a high degree of abrasion area or wear of the steel plate. Average applications are in truck couches, connections to diggers and earth movers and in preparing applications in the mining business.

The key quality for wear resistant steels is their hardness. We offer wear plate as per its hardness measured on the Brinnell Hardness Test- for the most part in 400HB evaluations.

Abrasion Resistance Plate Manufacturers, Abrasion Resistance Plate Suppliers In Mumbai,Abrasion Resistance Plate Stockists In Mumbai, Abrasion Resistance Plate Exporters In Mumbai,Abrasion Resistance Plate Traders In Mumbai ,Abrasion Resistance Plate Dealers In Mumbai, Abrasion Resistance Plate Importers In Mumbai, Authorised Distributors Of Abrasion Resistance Plate In Mumbai, Authorised Exporters Of Abrasion Resistance Plate In Mumbai,authorised Traders Of Abrasion Resistance Plate In Mumbai, Authorised Importers Of Abrasion Resistance Plate In Mumbai,autorised Suppliers Of Abrasion Resistance Plate In Mumbai.Abrasion Resistance Plate Suppliers In Mexico, Abrasion Resistance Plate Stockists In Uae. Abrasion Resistant Plate, Abrasion Resistant Sheets, Wear Resistant Steel Plate, Exporter, Stockist, Manufacturer, Suppliers/ 500 / 600 Sheets & Plates, Abrex 400 / 500 Sheet & Plates, Rockstar 400 / 500 Sheet & Plates Dealer In Mumbai, India, Abrasion Resistance Plate Manufacturers in India.

[chhajedabrex]

Abrex 500LT Steel Plates Dealers in India

Abrex 500LT Steel Plates Dealers in India

Introduction:-

Vandan Steel & Engg. co. are creators, representatives and suppliers of Abrex 500lt plates for our customers all around. We pass on product that are quality checked and offer outstanding use in a wide scope of usage.

Our Abrex 500lt plates are scratched territory safe and can be used in different working conditions feasibly. Our things are actually finished, which ensures that they offer immovable quality and quality in all states of usage. These things are attempted to last longer conversely with standard delicate steel types. The Abrex plates have a mix of properties, for instance, hardness, quality and toughness to offer amazing utility. Abrex 500 plates can without a doubt be cut, weld and molded using standard workshop practices in a manner of speaking. We offer things in an extent of versatile decisions to fulfill customer needs.

Product Overview-

The Vandan Steel & Engg. co. is Stockiest, Suppliers of wide extent of Abrasion Resistant Plates in Mumbai, India. This AR500 Plates and AR500F Plates (AR) Steel Plate is regularly made in the as-moved condition. These Steel Plates are fit for withstanding coldblooded conditions ensuring long organization life. These are used for improvement, process adventures and material dealing with, etc. These are available in various specific and thickness as per the necessities of clients. These are viably available at reasonable worth reach out in the market.

AR500 Plates is a scratched territory safe steel plate used in high wear applications like mining or material managing. This steel is warmth treated to appear through-hardening, improved surrounding and welding capacities. With a normal BHN (Brinell Harness Number) of 460 – 544, the security AR500 gives in wear applications is unprecedented.

Specifications:-

ABREX 500LT STEEL PLATE SPECIFICATION

Thickness : 5mm to 150mm Width : 1,500mm to 2,500mm Length : 6,000mm to 12,000mm Production : Hot-Rolled (HR) / Cold-Rolled (CR) Heat Treatment : N, Q+T Surface Paint : EP, PE, HDP, SMP, PVDF Material : ABREX 500, AR 500 Steel Plate, ABREX 500 Abrasion Resistant Steel Plates, ABREX 500 Wear Resistant Plates

Conclusion:-

Used in the creation of mining gear, the truck-trailer industry and the strong/complete industry, AR500 steel has extraordinary security from slide wear, rub wear and overpowering wear. It can in like manner withstand high impact stresses, even at exceptionally low temperatures. With its ability to withstand high impact weight, AR500 has been commonly predominant for its uses in body protective layer and ballistic plates.

Contact No:-022-23893665

Website:-https://www.abrexplate.com/abrex-500lt-suppliers-exporters-importers-distributers-dealers-stockists.html

[chhajedsteelplates]

Abrex 500 Plates Distributors in India

Chhajed Steel and Alloys Pvt. Ltd. is a prominent exporter and supplier of Abrex 500 plates, recognized for their exceptional hardness and superior wear resistance. Abrex 500 is a high-strength, abrasion-resistant steel, ideal for applications that require both toughness and extended service life in challenging environments. Here’s an in-depth look at Chhajed Steel's offerings of Abrex 500 plates:

Features and Specifications

Abrex 500 plates provided by Chhajed Steel are engineered to endure extreme abrasion while maintaining their structural integrity. These plates are available in a variety of thicknesses, typically ranging from 6 mm to 100 mm, with widths up to 2500 mm and lengths up to 6000 mm. The high hardness level, usually around 500 HBW, ensures superior performance in high-wear conditions. The chemical composition includes significant amounts of carbon and manganese, enhancing the plate’s hardness and resistance to wear. Additionally, the plates are designed to maintain their mechanical properties at both ambient and high temperatures, making them suitable for a wide range of industrial applications (Chhajed Plates) (ExportersIndia).

Applications and Benefits

Abrex 500 plates are extensively used in industries such as mining, quarrying, material handling, and construction, where they are subject to extreme wear and abrasion. Typical applications include the manufacturing of truck bodies, conveyor belts, dump truck liners, and chutes. The high hardness and wear resistance of Abrex 500 significantly extend the lifespan of components, reducing the frequency of maintenance and replacements, and thereby lowering operational costs. The plates also exhibit good weldability and can be machined to precise specifications, allowing for the creation of complex shapes and designs needed in heavy-duty equipment (Chhajed Plates) (ExportersIndia).

Export and Supply Network

Chhajed Steel and Alloys has built a strong reputation as a reliable exporter of Abrex 500 plates, with a broad client base that spans across Europe, the Middle East, Asia, and Africa. The company maintains a substantial inventory to ensure quick delivery and can supply plates in various sizes and grades to meet the specific needs of their customers. With a commitment to quality, all Abrex 500 plates undergo rigorous testing to ensure they meet international standards, including ISO 9001:2008. This ensures that the products delivered are of the highest quality and capable of withstanding the most demanding applications (Chhajed Plates) (Chhajed Plates) (ExportersIndia).

For more information:

Call us on: 932-111-3630

Visit our website: https://www.chhajedplates.com/

Email us: info@chhajedsteel.com

[chhajedabrex]

Abrex 500LT  Plates Exporters

INTRODUCTION:- Vandan Steel & Engg. co. depended on the hypothesis of persistently seeing the necessities of its customers and understanding that quality, on-time movement, cost and customer advantage are imperative to it accomplishment. Vandan Steel & Engg. co. depended on the hypothesis of persistently seeing the necessities of its customers and understanding that quality, on-time movement, cost and customer advantage are imperative to it accomplishment. Vandan Steel & Engg. co. Can redraw Plates for customers that require phenomenal plate sizes or specific tempers for their application. The Vandan Steel & Engg. co. is Stockiest, Suppliers of wide extent of Abrasion Resistant Plates in Mumbai, India. This AR500 Plates and AR500F Plates (AR) Steel Plate is regularly made in the as-moved condition. These Steel Plates are fit for withstanding coldblooded conditions ensuring long organization life. These are used for improvement, process adventures and material dealing with, etc. These are available in various specific and thickness as per the necessities of clients. These are viably available at reasonable worth reach out in the market.

DESCRIPTION:- Vandan Steel & Engg. co. are creators, representatives and suppliers of Abrex 500lt plates for our customers all around. We pass on product that are quality checked and offer outstanding use in a wide scope of usage. Our Abrex 500lt plates are scratched territory safe and can be used in different working conditions feasibly. Our things are actually finished, which ensures that they offer immovable quality and quality in all states of usage. These things are attempted to last longer conversely with standard delicate steel types. The Abrex plates have a mix of properties, for instance, hardness, quality and toughness to offer amazing utility. Abrex 500 plates can without a doubt be cut, weld and molded using standard workshop practices in a manner of speaking. We offer things in an extent of versatile decisions to fulfill customer needs. AR500 Plates is a scratched territory safe steel plate used in high wear applications like mining or material managing. This steel is warmth treated to appear through-hardening, improved surrounding and welding capacities. With a normal BHN (Brinell Harness Number) of 460 – 544, the security AR500 gives in wear applications is unprecedented. Used in the creation of mining gear, the truck-trailer industry and the strong/complete industry, AR500 steel has extraordinary security from slide wear, rub wear and overpowering wear. It can in like manner withstand high impact stresses, even at exceptionally low temperatures. With its ability to withstand high impact weight, AR500 has been commonly predominant for its uses in body protective layer and ballistic plates.

SPECIFICATION:- 1. Thickness : 5mm to 150mm 2. Width : 1,500mm to 2,500mm 3. Length : 6,000mm to 12,000mm 4. Production : Hot-Rolled (HR) / Cold-Rolled (CR) 5. Heat Treatment : N, Q+T 6. Surface Paint : EP, PE, HDP, SMP, PVDF 7. Material : ABREX 500, AR 500 Steel Plate, ABREX 500 Abrasion Resistant Steel Plates, ABREX 500 Wear Resistant Plates

BENEFITS:

High Strength: Abrex 500 LT has excellent strength properties, making it suitable for applications where structural integrity is critical. It provides higher strength compared to conventional mild steels.

2. Abrasion Resistance: One of the primary advantages of Abrex 500 LT is its exceptional resistance to abrasion. This makes it ideal for use in industries such as mining, construction, and material handling where equipment is subjected to abrasive wear.

3. Extended Service Life: Equipment or components made from Abrex 500 LT are known for their durability and longer service life due to its resistance to wear and tear. This can lead to cost savings by reducing the frequency of replacements and maintenance downtime.

4. Impact Resistance: Apart from abrasion resistance, Abrex 500 LT also offers good impact resistance, ensuring that the material can withstand sudden loads or impacts without failure, which is important in various industrial applications.

5. Reduced Weight: Despite its high strength and durability, Abrex 500 LT can often be used in thinner gauges than traditional mild steel, resulting in lighter weight structures or equipment without compromising performance.

6. Versatility: Abrex 500 LT can be easily welded, machined, and formed, offering versatility in manufacturing processes. This allows for the fabrication of complex shapes and structures to meet specific design requirements.

7. Cost-Effective: While Abrex 500 LT may have a higher initial cost compared to mild steel, its extended service life and reduced maintenance requirements can result in long-term cost savings for businesses.

8. Corrosion Resistance: In addition to its abrasion resistance, Abrex 500 LT often possesses good corrosion resistance properties, further enhancing its suitability for use in harsh environments.

CONCLUSION:- In conclusion, Abrex 500 LT offers a range of benefits that make it an attractive choice for industries requiring high-strength, abrasion-resistant materials. Its exceptional strength, resistance to abrasion, extended service life, impact resistance, and versatility in fabrication contribute to its widespread use in applications such as mining, construction, material handling, and manufacturing. Despite potentially higher initial costs, the long-term cost savings due to reduced maintenance and downtime make Abrex 500 LT a cost-effective solution for businesses looking to optimize performance and durability in their equipment and structures.

CONTACT US:- Phone : 022-23893665 Phone : +91-8828813630 E-mail : info@vandansteel.com