#AR 400 Plate | Explore Tumblr Posts and Blogs

wearplatesindia · 4 months

Text

AR 400 Plate

Introduction

We at Vandan Steel & Engg. co. are resolved to build our piece of the pie by fulfilling our client prerequisites through offering products at focused costs, on time conveyance, better backing & giving in transit data wherever needed by customer. We should persistently enhance in knowing our customer needs and proactively following up on things needed to carry out the same.

Resolved to attain 100% client fulfillment, we determine that each customer gets the esteem for cash from our products and administrations. We trust in moral transaction strategies in distinctive parts of our business.

Description Abrasion resistant steel is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Typical applications are in truck beds, attachments to diggers and earth movers and in processing applications in the mining industry.

The key quality for wear resistant steels is their hardness. We sell wear plate according to its hardness measured on the Brinnell Hardness Test- usually in 400HB grades.

400 HB steel is over 3 times harder than mild steel (120HB), but only a third as hard as stainless steel (150HB). Example uses are for construction machinery, skips, bulldozers and excavators, buckets and conveyors.

Steels with a hig HB rating (Briness Hardness) are intended for applications where wear or abrasion resistance is important. The benefit of using an abrasion resistant steel is that the plant, machinery or constructions working life can be extended considerably. This can significantly improve the reliability, durability and safety of structures and equipment. It also helps to reduce the maintenance costs associated with wear and breakdown of plant.

The steel is quenched which provides wear resistance; in order to improve hardness it may also be tempered. Lower HB's generally provide good cold bending properties and good weldability. Weldability is not generally reduced as the hardness increases.

Benefits

The benefits of using AR 400 plates are numerous:

Superior Wear Resistance: The primary advantage of AR 400 plate is its exceptional resistance to abrasion and wear, making it ideal for high-stress environments.

Extended Lifespan: Due to its durability, components made from AR 400 plate last significantly longer, reducing the frequency of replacements and maintenance.

Cost-Effective: Although the initial cost may be higher, the extended lifespan and reduced maintenance needs make AR 400 plate a cost-effective choice in the long run.

Versatility: AR 400 plate can be used in a variety of applications, from mining and construction to agricultural machinery and material handling equipment.

High Strength: It offers excellent strength and toughness, capable of withstanding significant impacts without deforming or breaking.

Product Overview

Vandan Steel and Engg. Co. is dedicated to providing AR 400 plates that meet stringent industry standards. Our products are known for their consistent quality, high performance, and reliability. Whether you are in mining, construction, or any other industry where abrasion resistance is critical, our AR 400 plates are designed to meet your needs.

Our AR 400 plates are manufactured using state-of-the-art technology and undergo rigorous quality checks to ensure they meet the required specifications. We also offer customization options to match your specific requirements, ensuring you get the best possible product for your application.

Conclusion

Choosing the right material is crucial for the longevity and efficiency of your equipment and operations. The AR 400 plate from Vandan Steel and Engg. Co. offers unparalleled wear resistance, strength, and durability, making it the ideal choice for demanding applications. For more information or to place an order, contact us at [email protected] or call +91-8828813630. Let us help you find the perfect solution for your needs with our high-quality AR 400 plates.

#AR 400 Plate #AR 400 Plate Suppliers

0 notes

mylevisdontfitanymore · 10 months

Note

Bucky fattened by a frat as a mascot of some kind? Starts pretty big when he’s a freshman, already pushing 400 — come what would have been his final year and it takes a couple bros to turn him over to fuck. Ah I dunno just free use immobile blob Bucky who’s an absolute cockslut, he’ll do anything so long as he gets as much food as he wants? Pledges have to attend to him 24/7, that includes his bi-hourly funnel feeding, a litre or so of shake every other hour?

Anyway, maybe Steve was his first attendant? Both freshman, Steve was made to feed him and please him and serve him, and now he’s head of the frat or however they work.

Anyway there’s the rambling done waddaya think?

You should check out "teamwork" by caloriebomb!!

I keep, in particular, thinking about this part:

“Steve made this coffeecake just for the team,” Clint said, and levered another vast slice onto Bucky's plate. “You can't make him feel bad by not eating it.” “I'm fucking full,” Bucky said. “I can barely breathe.” But of course, he ate it. And he ate more bacon, too, and let them give him the last chocolate chip muffin, and he drank another glass of milk, and ate another slice of heavily-buttered bread, and, to hell with it, finished off the rest of the bacon entirely. He was moaning a little by the time he was done, shameless in his discomfort, his belly almost hard to the touch and so heavy he felt pinned down by it. “For good luck,” Sam said, and rubbed his belly, and then Clint followed suite, and suddenly Bucky was inundated with a line of football players all trying to get their hands on his swollen gut, and Thor was shouting, “Our good luck charm! Our good luck Buck!” and honestly it felt too good to protest, and he was so stuffed he could barely speak anyway, so he just sat there and let it happen, weighed down by his enormous breakfast and the unbendable dome of his throbbing tummy.

I do, really, really love this idea, though. I keep picturing one of those big snorlax plushies with the huge tummies and short little legs.

Like, c'mon, that is Bucky.

Unbeta'd, you know how it is, warning for Bucky-centric belly kink filth. Implied stucky? Stuffing, funnel feeding, immobility, alcohol consumption, intox kink, slight come inflation, etc.

Or, that's what Bucky turns into after he's hazed and then pledges, and is officially a member of his frat 👀

He absolutely is a big boy going in, but after he's been in for a few years, nearing the end of his college days, he's packed on more than the freshman 15, by far.

After being constantly stuffed and fed and fucked by his bros, he's unbelievably round. So round that his stomach floods between his far spread thick thighs, forcing them apart, and it rests on top of those thick, heavy thighs, leaving him without the ability to stand without help. Really, he can hardly maneuver around it - his belly, that is. It's so heavy. It's always so full. Hell, he can't get his fucking arms around it now! He can't shut his legs, either. Not that that matters when his frat bros are always trying to get them wider, anyhow, using his hole when they can manage to roll Bucky over onto his enormous gut, or just fucking any of his many, many rolls.

He's soft and irresistible all over.

Fat on fat on fat.

Stacking up.

He's overflowing with fat. He's impossibly fat. So much so that when his bros try their best to use their gym-honed muscles - biceps flexing - to lift his massive belly, they sweat and grunt but simply can't always squeeze their arms in between his rolls enough to find his cock. It's buried. Not that Bucky's cock matters to him much now... he gets more than enough pleasure without a finger laid on him there. There's enough pressure and friction from his own fat. He can grind against himself. And his belly is more than sensitive enough. Always bloated tight and packed even fuller. Just touching his gut is enough to make him come.

Whenever the guys can't roll him over - either because there's not enough helping hands around the house at the time, or Bucky is too full to flip, heavier than usual and making sounds like a beached whale, protesting, lest he throw up - they end up fucking all his excess fat. They fuck his love handles and stacking up sides. Plush. They fuck his moobs. Overflowing and flabby and deliciously sensitive, especially those stretched out, hard nipples. They fuck where his belly flops onto his thick, spilled-out thigh. They fuck his belly. They fuck his beanbag like belly.

Heavy.

Thick.

Blubber that rolls like waves when they get going, really into fucking their mascot, and the thrusts push out burps and groans and heavy, gasping breaths from Bucky. He can't handle it. It feels almost as good as being fucked in his hole. He loves having his belly fucked, even if it presses on his stuffed stomach, walking the line of being too much. Pleasure that almost hurts.

Bucky loves it, though.

Even when he's about to pop, bursting at the seams, unable to stifle the hiccups and burps and deep groans bubbling up from his sloshing tummy with how hard he's being jostled, fucked and toyed with however his bros want. Maybe especially then.

Or, no, the best is when they're all home after a party. When the party upstairs has wound down and all his bros are drunk, not yet passing out or fully blackout drunk, but when they're lose enough that their rougher sides come out. Then, they're rowdy from the pounding music, drinks, and crowded, sweaty bodies, and they all seem to share a single thought, needing to use him; needing to fill him; needing to lavish their lucky and greedy mascot with attention after leaving him alone in the basement for the party. Their dirty little secret. Their sweating, panting, growing mascot.

If Bucky's any mascot, he's a pig.

A big, fat pig.

A pig who's always shoveling food into his mouth with his fat hands, his fat chin doubling and thick throat bobbing with each massive mouthful. Never satisfied.

They're going to satisfy him...

After a party, they're all always hard, barely contained in their jeans and gym shorts - unashamedly obvious. Their faces are flushed, eyes hungry, and lips loose and wet. Beer on their breath. Crowding around him. Everyone is aching to touch. He's so soft. So big. So heavy. So fat.

Now, the fraternity make sure to buy more beer and snacks than a party could ever take down for the sole purpose of feeding their pet pig afterward. They know where they always end up.

Every. single. time.

They tear apart the whole house for Bucky. Not just demolishing the party supplies. Everything. Everything is fair game. They feed him chips and dips and kegs of beer and pizza and all that junk. And then...

And then, they break out the protein powders and blenders and make shake after shake after shake for Bucky.

Weight gain shakes.

None of the protein is going to turn into anything but fat. Bucky doesn't move. Bucky is just a ball.

Bucky is a mascot, a pet - a fun, fat, soft toy for them to use. They'll be fucking him sloppy and messy, after a party, and will forget to keep feeding him. Then. That's what Bucky moans for. He doesn't want to come. No. He wants more.

More food.

God.

More.

He begs so much, so greedy, that they have to feed him to shut him up. And when they do run out of things to feed him, there's nothing to be done but shoving their dicks down his throat and coming, filling him up that way, if he's just so desperate to be full.

He is.

He's so desperate to be full.

And every time he is full, he's not just full. He's overfull. Meaning... next time, he'll be able to take just that much more, ever-increasing his huge stomach capacity 🥵

#ask #mylevisdontfitanymore #belly kink #text #bucky barnes #steve rogers #chubby bucky #fat bucky #stucky #fic rec #fanfiction recommendation #caloriebomb #animal play #pig

28 notes · View notes

elodiedreams · 5 months

Text

Sometimes I am the devastation wagon. I was just thinking of the name because of the devastation around here.

Rabbit recently uncovered the truth about Old St. Nick. A week or two ago, we were shopping at the bookstore and he had his eye on something that I suggested he buy. He protested that it was “expensive”. I joked back to him that I wasn’t asking him the price, I was asking if he wanted to bring it home with us and that I’d spent many thousands of dollars on him over the years and it’s just not an issue. Flippant remark, stupid flippant remark. Out of seemingly nowhere he said, Do you mean you bought the new gaming computer, mama????? (the one that was left under the tree for him this past Christmas). And in that moment, knowing Rabbit, knowing he’s 11, knowing he will be starting middle school in the fall, and assuming that the question was BECAUSE he knew the answer… I just answered honestly. Yes, I did.

And he was aghast. How were there sooty footprints all over the house leading out of the fireplace every year. How did we have that footage of the reindeer in our actual house in front of our actual fireplace? (incredible AR that was so realistic it could have fooled anyone) Who built the train set that first year? And then wired up the covered bridge a couple years ago? How did the carrots get so shredded and left all over the floor around the plate we leave out every year. what about the time the elves came into MY room while I was sleeping and left me my own tree all dressed with decorations? Who wrote all those long letters to me that Santa leaves every year. They’re not in your handwriting, mama. You made it all up?

And then, The easter bunny, too? The tooth fairy? The leprechaun?

But the devastation, I’ve come to realise, is Eino. Eino is our Finnish nisse. He started coming around during Covid. When we discovered a youtube channel for a children’s puppet theatre group in Great Britain that started putting their productions up on YouTube during quarantine. That first December, 2020, they made a series of Advent Videos called The Christmas Nisse. Come back every single day in December and watch the unfolding of this perfectly charming story about a boy, his single mother and the nisse that comes into their lives. We’ve watched it every day of December for 4 years now.

He was charmed, so enchanted by this whole thing and so, I added it to the repertoire of magical things in his life. I wrote these miniscule notes in Finnish (me and the translate app writing in letters so small I had to buy a special ultra fine tipped pen just to make them) and left them to be found in out of the way places… and then translated them for Rabbit, who was always elated by these tiny missives. Eino would leave crumbs and spilt milk, evidencing his visits. He would leave little trinkets and we knew he took things when we couldn’t find things sometimes. He told us the story of his life and adventures, he was 400 years olde and very wise. Rabbit took to writing notes back to Eino. Eino would randomly come and go, never a seasonal nisse, he was just the nisse who came.

When Covid began, Rabbit had just turned 7. I see, now, that his notes to Eino were mainly about his fears and worries. He wanted to be sure Eino was keeping an eye on us and that we would be safe. Eino kept his word and kept us safe from Covid and from most everything during all the time he has existed for us.

And with my flippant impulse, my decision for the first time not to turn the question back around to Rabbit “what do you think?” I destroyed Eino in one fell swoop. Oh, but we fuck things up as parents. How careless. Eino gave him more comfort than I properly understood, and was perhaps more important to him than even Santa Claus himself. Maybe Rabbit had an inkling about the magic of Christmas being inside your heart, but he was not ready to fully let go of the idea of real magic in the world just yet.

And it was only tonight, when Rabbit asked if Strider was allowed to sleep in his room at night, instead of mine, that I realized. He said he gets worried at night and can’t sleep sometimes now because he always knew Eino was keeping an eye on him. Even when Eino wasn’t leaving notes and stealing oatmeal, he knew Eino was keeping us safe. Now he knows Eino is not real, so can Strider please sleep with him now? (and yes, Strider is alongside his bed now).

These are the days. Just, heavy heavy boots days.

#little angel theatre #Rabbit and me #growing pains #Eino

12 notes · View notes

chhajedabrex · 8 days

Text

Abrex 450LT Steel Plates Dealers in India

Our Abrex 450lt plates are scratched spot safe and can be used in commanding working environments reasonably. We devise our things to give them precision finishing, which ensures that they offer astonishing utility in all circumstances of use. These things are worked with the end goal that they last longer than standard delicate steel types.

The Abrex plates unite properties, for instance, hardness, quality and durability to offer surprising utility. Abrex 450lt plates can be cut, welded and formed using standard workshop practices suitably. We offer things in an extent of customizable choices like size, thickness, and finishing to satisfy customer needs.

The usage of scratched region deterrent ABREX 450lt Plates quite lessens the weight of helper people introduced to serve harsh conditions. Complexity and typical steel, ABREX steel plate diminishes fundamental weight and passes on fiscal advantages.Gathering of unrivaled scratched region safe ABREX will haul out the organization life of mechanical assembly and portion.

Abrex 450lt Steel Plate Specification

Thickness : 6mm to 100mm Width : 1,500mm to 2,500mm Length : 6,000mm to 12,000mm Production : Hot-Rolled (HR) / Cold-Rolled (CR) Heat Treatment : N, Q+T Surface Paint : EP, PE, HDP, SMP, PVDF Material : ABREX 400, AR 400 Steel Plate, ABREX 400 Abrasion Resistant Steel Plates, ABREX 400 Wear Resistant Plates

#abrex 400

0 notes

titussteel12 · 1 month

Text

Understanding the Difference: AR 400 vs. AR 500 Steel Plates

What sets AR 400 and AR 500 steel plates apart? Learn about the differences in hardness, applications, and machinability. Contact Titus Steel for information.

0 notes

molsons112000 · 5 months

Text

So the Chicago Elevated train line should think about creating steel with different colors adding a natural color to the tracks as well as ties that the steel tracks connect to.

These below disadvantages, each one can be addressed and overcome related to steel.

What are the disadvantages of high-strength steel?

Created with Sketch. Disadvantages

May have to be preheated before welding.

More force is needed for forming.

The fatigue strength is only slightly higher: fatigue fractures may occur.

Structural engineers require a lot of expertise to select the right steel.

https://rime.de › wiki › high-strengt...

High strength steel | Durable material with a long life span

Nature

https://www.nature.com › ... › articles

Overcoming the strength–formability trade-off in high ...

by G Park · 2022 · Cited by 2 — In the present study, by utilizing cryogenic treatment, an attempt has been made to develop the steels that show

So you will find by changing the Temperature in the process of making steel, you can lock in Different types of colors. Also, you can use nanoparticles to create different types of colored steel. So the point being is, that you can create structures like trains that you can't paint the steel. You need to actually have the steel made to that color. Other places you can use these coloring capabilities for the steel, including paint. But in some places like creating skyscrapers or the track for trains.It needs to be embedded in the steel itself...

How do you make different colors of steel?

Heat the steel to temperatures from 400 to 800 degrees Fahrenheit, to produce oxidation colors. At 480 degrees F., the steel turns brown, at 520 degrees, it turns purple, at 575 degrees, it turns blue and at 800 degrees, it turns grey. These temperatures are commonly used in tempering tool steel.Apr 24, 2017

https://sciencing.com › give-steel-di...

How to Give Steel Different Colors - Sciencing

As you see below, they're using lasers as well as laser nano particles to create embedded colors in steel...

Optica

https://www.optica.org › newsroom

New Laser Methods Create Dazzling Colors on Metals

Feb 19, 2019 — The researchers applied three methods for manipulating metal coloration with lasers: laser oxidation, laser nanoparticle

By changing Is the size and shape of the nano particles They will change in color and using these in the process of making steel can Change the color of the steel you produce. So if done right, you can even put images into the steel beams. But you can also use the laser process above to create different images in the steel beams... It's so steel can transform from boring to amazing colors and amazing images. And yes, they can produce steel that is naturally safety colors like yellow. 👍 And this processes can be used in creating sculptures of amazing colors and features...

Indiana University

https://sciencefest.indiana.edu › co...

Coloring with Nanoparticles - Science Fest

Nanoparticles of the same material can take on different colors just by changing their size and shape. Modify the shape and size of nanoparticles

So again this can increase the demand for steel. So literally you can create boats that have the color embedded and then through the laser process put and the side of the boat Spirit of Chicago. Bringing down the cost of maintenance of ships related to it's color....

Here's some things going on in the steel industry.

Samsung put this piece together about the global steel industry.Now add some other amazing colors and graphics that are embedded in the steel and you can create all kinds of amazing looks...

Samsung C&T Newsroom

https://news.samsungcnt.com › 20...

A test of strength for steel in a new global era

Feb 22, 2021 — When people think of steel, silver or gray may come to mind. However, color steel plates have recently gained attention. Steel plat

EMJ

https://www.emjmetals.com › ...PDF

High Strength Low Alloy Steel

AR 235 ABRASion ReSiStinG SteeL. Plates — Sheets color Marking: Gray and Orange

SSAB

https://www.ssab.com › ...

SSAB high-strength steel - sheet, plate, coil, tube, profile - SSAB

... color coated steel solutions for roofs, façades and rainwater systems. Find out more. Toolox logo. Toolox® is designed to be the market's most versatile steel ...

LinkedIn · Discovery Masters

6 days ago

High Strength Low Alloy Steel Market Size, Future Trends

The high strength low alloy steel market is highly competitive with a few key players dominating the market. These players are constantly ...

Combining this below process of steel with the adjectives that are stated below that together can increase the strength of steel numerous times.... Bringing steel to a unbelievably. Stronger state than ever before. Meaning compared to older forms of steel this can be six times ten times maybe a hundred times stronger than older steel....

How has steel improved over time?

It became harder and stronger: qualities they undoubtedly recognised as valuable. They would also have noticed that these qualities improved with repeated heating, folding and beating of the material as they forged the metal.

https://worldsteel.org › about-steel

The Steel Story - worldsteel.org

What metal is added to steel to make it stronger?

Nickel and Chromium is added to steel to increase the hardenability and toughness.Feb 22, 2024

https://www.quora.com › What-ele...

What elements or materials can be added to steel to enhance ... - Quora

"Effects of Silicon, Chromium, and Copper on Kinetic Parameters of Precipitation during Tempering of Medium Carbon Steels"

ScienceDirect

https://www.sciencedirect.com/science/article/pii/S0079642520300840

Alloy design strategies to increase strength and its trade-offs ...

WEBApr 1, 2021 · A method to alter the interfacial energy between matrix and particle can be applied for both

Now, we looked at chromium and some other additives into steel. Now let's look at nickel.

How does nickel affect carbon steel?

Author to whom correspondence should be addressed. Nickel is an important and widely used alloying element in carbon steels. Some of its prominent metallurgical effects in these steels are moderate solid solution strengthening, mild hardenability and, importantly, a strong promotion of toughness, especially at low temperatures.

Alloys | Free Full-Text | Nickel Alloying in C…

mdpi.com

Why is nickel used in steel?

The use of nickel increases corrosion in steel. The abrasive resistance of steel increases when nickel is added to it as an alloy. Nickel increases the elastic limit of steel. Nickel steel alloy is used for making storage cylinders for liquefied gases and for other low temperature applications.

Production and Uses of Nickel Steel Alloy - …

brighthubengineering.com

Why is nickel added to steel as an alloy?

When nickel is added to steel as an alloy, the nickel component increases the toughness of steel. Due to the increase in toughness, the property of steel to resist fracture due to high impact increases. This property is beneficial in parts made of steel subjected to shock and impact load.

Production and Uses of Nickel Steel Alloy - …

brighthubengineering.com

What happens if nickel is added to steel?

The addition of nickel in steel decreases the value of distortion (distortion energy) at the time of quenching. The critical temperature of steel decreases when nickel is added to it. Due to decrease in critical temperature, steel becomes better for any type of heat treatment. The strength of steel increases because of alloying nickel in the steel.

Production and Uses of Nickel Steel Alloy - …

brighthubengineering.com

mdpi-res.com

https://mdpi-res.com/d_attachment/alloys/alloys-02-00001/article...

[PDF]

Nickel Alloying in Carbon Steel: Fundamentals and Applications

(a) (b)

2.4. Solute Atom Effects of Nickel

2.8. Influence of Nickel on Fatigue Behavior

3. Application of Nickel Alloying in Carbon Steel Strip and Plate Products

4. Conclusions

Figure Figure 2. (a) 2. (a) Example Example of nickel of nickel alloy alloy effect effect and and processing processing conditions conditions on on achievable achievable ferrite ferrite grain grain size size in low‐carbon plate steel; (b) principles of achieving fine ferrite grain size by alloying

So you can see how force applies to particles and how it affects particle shape. And then you can see about manipulating the nanoparticles. These all can be used in increasing all the different aspects of steel.

speed. Describe the …

Physics LibreTexts

https://phys.libretexts.org/Bookshelves/College_Physics/College...

5.3: Elasticity - Stress and Strain - Physics LibreTexts

WEBFeb 20, 2022 · change in shape due to the application of force Hooke’s law proportional relationship between …

Nature

https://www.nature.com/articles/s41467-020-15206-y

Exploiting the role of nanoparticle shape in enhancing ... - Nature

WEBMar 17, 2020 · This study opens the doors to a change in direction in the field of gel nanocomposites, where nanoparticle

So increasing the carbon into steel can increase its strength.

tec-science

https://www.tec-science.com/material-science/iron-carbon-phase...

Influence of carbon on hardness and strength of steels

WEBJun 30, 2018 · With increasing carbon, the hardness and strength of unalloyed steels increases. Above a content of

So moving steel making to Carbon Neutral...

The World Economic Forum

https://www.weforum.org/agenda/2023/11/4-breakthrough-actions-to...

4 breakthrough actions to decarbonize steelmaking

WEBNov 4, 2023 · However, to deeply decarbonize and reach net-zero, further steps are needed to address the …

What is green steel and how c…

The New Yorker

https://www.newyorker.com/.../the-promise-of-carbon-neutral-steel

The Promise of Carbon-Neutral Steel | The New Yorker

WEBSep 18, 2021 · Basically, steel is iron, with a little carbon added in to increase strength: tiny carbon atoms nestle …

electrification of heat generation, …

ThePipingMart Blog

https://blog.thepipingmart.com/metals/increasing-carbon-content-in...

Increasing Carbon Content in Steel: A Step-by-Step Guide

Step 1: Introducing Carbon Through The Melt Process

Step 2: Adding Carbon Through Alloying

Step 3: Introducing Carbon During Casting

Conclusion

One of the most effective methods for increasing steel’scarbon contentis introducing it during the melting process. This is done by adding high-carbo…

See more on blog.thepipingmart.com

The Fabricator

https://www.thefabricator.com/.../making-steels-stronger

Metallurgy Matters: Making steels stronger - The Fabricator

WEBOct 9, 2003 · There are four ways to increase a metal's strength: Cold working; Solid-solution hardening

So hopefully we can make more beautiful Types of steel.

My point to this piece was hopefully Chicago can beautified the elevated tracks that wrap around chicago.

Watching WTTW Chicago and the show Chicago by "L" with Geoffrey Baer.

R&S Track, Inc.

https://rstrackinc.com/which-railroad-ties-to-use

Constructing New Tracks - Which Railroad Ties to Use | R&S Track …

Railroad Ties vs. Railway Ties

The terms railway and railroad are often used interchangeably, but there is actually a distinct difference between the two. A railway is a system of tracks th…

Wooden Railroad Ties

A variety of wood types were used when creating wooden rail ties such as hardwood and softwood timbers. The main benefit of using wood is that it i…

Concrete railroadties

Concrete rail ties benefit from being very inexpensive topurchase and can at times be easier to acquire compared to timber. Concreterail ties are als…

Steel Railroad Ties

Steel ties have in the past been badly abused due to rapidlychanging conditions and technology imposed on them. Many of these old steelties are …

Railroad Tie Installation

R&S Track is a premierrailroad contractor in the Midwest United States. We have proudly been inbusiness for over 27 years and have had the confidence of num…

Explore further

0 notes

titussteel2019 · 1 year

Text

Wear Resistant Steel and Wear Plates In Toronto, Mississauga, ON - Steel grizzly screens and grates probably suffer more abuse than just about any other piece of equipment. They suffer constant impacts and abrasions during every moment of their use. That’s why they tend to wear out much faster and result in a lot of downtime when they break. At Titus Steel, we can cut that downtime with grizzlies made from our ENDURA and ENDURA Dual steel. These unique and advanced abrasion–resistant steels can outperform AR 400-500 steels by as much as 2-3 times. ENDURA and ENDURA Dual with Titanium Carbides are an evolution in wear steel for grizzly screens. They will significantly reduce downtime by 50-75% and ensure continuous production over a longer period of time.

#grizzly screen

0 notes

orange1896 · 1 year

Text

60304000431 LG833B.08VI.03 LYG-1305002 Condensate drain valve LONKING

6390903016 BUCKET 6430001477 PLATE_FUEL TANK REAR 4110001300065 LG955N轮胎式装载机 4120010642004 调整垫片II FZ0000372 配重 6215000640 突缘叉130-2201023B 14520039 6214000513 气缸盖罩总成1001244054 29260008762 齿轮 ZL20-032010X1 ( Z = 46 ) 4120009291L 托板129004-03010 4120002606109 销轴LGB301-120*N*415-40Cr 29030024301 一倒档拨叉7DS180-1702055 9314-02200 6390203938 副车架套 6390202443 仪表台线束 LG5302000004 底座 4014000540 停用-套 29330066611 底板 14555914 4120001212 推拉玻璃 4110000997086 高度尺划线头 7300001348 螺栓GB16674.1-M10*110EpZn-8.8 M0860WAJ0 闪光灯继电器4DB003675-01 29260016321 螺栓B00000502 28010008451 右挡板 14400145 板 29220014831 USB打印机方口数据线1.5米 6216000423 驾驶室附件 ZJ4190001669 O形圈GB3452.1-165*3.55G 4110000415099 吸水接头 14407258 副水箱盖 1172-01071-A 29020017441 螺栓GB5783-M16*40flZnyc-10.9-480 14636772 26210000031 玻璃门文件橱1880*860*400（下面2层为铁门） 14646422 26240025241 连轴齿轮 937005 29080008021 支架 3214592526-A 4180000219 右支架 6399000576 油底壳总成612600150180 630-1006019 26141005941 曲轴止推片6105Q-1005058A 14550662 LG2926002313 3 节流接头 14596323 9150000020 销 14596319 FXKAY-00608-MF E685F标识包 26290016901 TRANSMISSION ASSEMBLY 14401251 6T齿轮R33 ZJ2713011810 铜环(内孔165，外径220，厚20) JB8406-B10*800 11210253 L956F-W大波距散热器换下模块 11213501 电机YX3-132M-4 7.5KW B5 14570725 右台架组焊胎 3/8-16UNC-2B*20-10 4110015194097 O型圈90502592 14400278 传动轴总成 4110001161005 潍柴420发动机、加缓速器、排石器、制动喷淋、车顶警示灯，31.5m3高强多工况 1110016-30D 11210686 板 26120004161 限位开关 DC-24V 14513034 法兰接头1DFL-36-16 10-00391-01 29310027581 抛光膏 10-00392-01 16027702 垫片1000983067 Q1200830 F707816 发动机总成BF4M2012C(B40-13T2-A714) 4110000076270 禁止踩踏标识（宽50） 29350011581 钎杆-锻打M型10000T-MF C4935793 4190002559 桥油管 LG02-YS2 26180002731 气缸垫总成1003090B56D/A 16027737 巡更器 11216984 左安装支架 4130001211 水杯HK0606L.1 9580L1 胶管F381CACA121206-1150 6410003414 排气钢管 14617170 26330070614 充电线固定板 14406133 端盖R901467055 4120000560511 标志与标识 7100001280 P-橡胶管夹 LG7300000550C 透气管 26011003401 前车架 3214563968-A LG7300001030A 通风管 9567-20801 29171024721 支架F04259307 9612-08040 6253000527 板 14512071 6900001607 固定销 14589129(14515051) 4120000064003 BOOM_WA 5.7M HD _ EC210C(welded) 9564-20800 LGG916 钢球H70094800 4190000799023 快换阳接头H4-63 11216958 油门操纵机构 29260041371 钢球310B2008-00 9452-03228 26171016551 管夹 A3906973 4110015708067 插排GN-420 5米 4110004063176 行程开关 11211050 开关固定板 26140003411 左隔板 26140001131 驾驶室936L 4120009225 ECU支架13057835 14401331 上拉杆5 6212001059 继电器 Y2NJ AC220 14517507-A 6410008066 板牙 3214562339 A31-4110002141 发动机总成BF6M2012C（BF6M2012-20T2-1042） 14579119-D 6264000312 ACCELERATOR PEDAL,ECO 7273-10300 11215670 过滤器 7273-10110 29260012261 螺纹接头 4110000038337 支架 F2927000869 蒸发风机GKZ7-5.0-20B 6373401259 踏板 11219271 叉杆 1A021-5613-3 28210014901 RAIL,RH HBV200 6410007753 LGB677液压油箱总成 4110000909021 电瓶PBT20 28010007731 后罩线束 29240023371 胶管 963948 4130000068001 前摇臂销 8149651-B 29150010472 前车架 3214611408-A 6420000935 下封板 14529045 26370001261 大腔钢管总成（C）HJ3118592 R0300Z2411203A0 LFT22传动轴总成 FSK75-LG L972F装载机 4110000042112 TRAVEL CONTROL VALVE ASSEMBLY 11215201 固定板毛坯 29120030921 动臂油缸右小腔钢管 A17-4110001009 镗（铣、车）胎类工装维护点检卡质记120-3号 2110900513 胶管 6233000847 板 14533877 4130002090 转子 14511399-B 29290024131 平地机铲刀浮动模块 9312-10300 29141000141 护板 949239 9100000806D 支承板 9415-22031 15402533 非公路自卸车 3214548008 4120004286 C型钢 1041-00631-A 26380003781 铜套 29050204441 胶管JB8406-B38*470 3214530361-B 11215699 踏板总成 C5292292 4043002193 长方管 4120005923 万能线路板200*150 3214577191 29280011161 发动机罩 3214550162-A 6392202914 PLATE_RR -RH 29030019011 上罩板 3214517709--A 26050001861 右挡板 9751-15016 29170309241 皮带 11701952 29270027201 右内衬 F11211887G 密封件包24A600670S 6299000394 夹紧和升降气缸SC-40*400S-LB 11219578 主阀14777849 9612-09540 29120022901 PLATE LH PILOT 4110000997089 调整垫片ZL20-032016 29260012551 胶管F731C96A251612-1450-PG1400 0631.311.009 6420001683 转向油缸HSGF-90*50*400 29400000621 轴套LGB302-85*135B2 Q/SC642.1-01-M14*1 29010044921 EGR冷却器出水管后胶管1207194-A002/A GB/T97.2-8-200HV-Y 4011001244 UL电瓶��P70*2400 26330063851 灌注器 6430001090 E6300F主线束 26380004701 PLATE; TOP; D8 ARTICULATION HINGE 4013000319 指示灯AD16-16C 6.3V 29141007441 海绵430*300*30 7100000511 液压油散管右 L038HW2215A29E0 管道刷Φ10 9200001371 后横梁 3214619972 4110000184072 胶管 955925 28230020391 阶梯镗刀029-14∮130 978937 9200001364 开关 14570425--- 29050204481 steel plate t50-Q345B 3214607320--A 4130000695 刀夹V0783-6001/2 3214624224 4110003763018 轴承33210/Q 3214544880-B 11211676 管夹 4180000067 P-六角头螺栓B00000520 11211707 优先阀进油软管 28010003011 PLATE 4120000560 缓冲套LGB123-0846 ZJ4110001338013 垫圈100*122*12.1 29170128751 空气加力泵SL20 29151003791 弯板 6900001623 25平方电瓶连接线200mm 28220004641 管夹 11218717 连杆（工字架） 22830153 26330006971 螺栓 22768569 4110000081172 油泵轴YJ280-4H-00003 LG2926002479 4 板 28360005011 油门马达 1014015-30D 6373401609 停用-支架 11210064 密封圈 22586088 3110900730 定位螺丝 A030A376 2080700022 护板 LG09-JSRG-1000 4110001005208 轴叉总成ZL50G.5.8-02 21723241 29010042861 停用-排气门(12159608)PTD226B-6(13020158)-023 21714184 11213771 加油弯管 4110000014057 绝缘手套35KV 6410007113 P-垫片 20833930 F81N8-19510F 钢管 4043000827 COVER_LH_PANEL W_SHIELD FDH220-LGZC 延长杆64501050 26260011341 密封圈 14527582 倒档活塞 6241000010 拉杆 4110016116004 阀芯22011601210 HVY32.2 40Cr 761G-02-105 4190000536483 转斗联左大腔钢管 HSGF-140*80*500-95 4110000560133 塑料圈过滤袋（1）号Φ180*810 PE50um CK110*70*400 2833000196001 限位阀 26011007651 短护套Ⅲ 6105Q-1004019B 29171018951 配重加强板 14548262 4110002126133 PLATE 14516446 29370006751 挖掘操纵台面 9315-02201 4120008015 停用-接触器MZJ-100A/011 14519158 Read the full article

#LONKING

0 notes

hardtuff · 2 years

Text

Extreme Service Rock Bucket

Rock Buckets are otherwise called "street building" or "pipe-lining" buckets. This bucket has a more grounded basic structure, extra wear materials as liners and hard surfacing, and the best teeth and corner bits. At the point when stacking and scraped area are normal, this bucket is the one to utilize. The stone bucket is sturdy by configuration, yet is broadly useful by shape. For use in virgin materials or in inadequately arranged, sharp, rakish, or broken gradient and very abrasive conditions, including:

Logging Road Construction

Pipeline Construction

Mining

Quarrying

FEATURES

AR 400 plate is utilized in all wear territories

Accessible wear bundle incorporates: base wear bars, base wear plates, inside and outside cheek plates, and move plate liners

Every single basic weld tried to guarantee weld consistency and quality

All welds satisfy AWS and CWB guidelines

https://www.hardtuff.com/extreme-service-rock-bucket.html

0 notes

wearplates · 3 years

Text

AR 400 PLATE

Abrasion resistant steel is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Typical applications are in truck beds, attachments to diggers and earth movers and in processing applications in the mining industry. AR 400 Plates

The key quality for wear resistant steels is their hardness. We sell wear plate according to its hardness measured on the Brinnell Hardness Test- usually in 400HB grades.

Wear resistant steels are not appropriate for use at temperatures over 250 degree C as the heat can cause changes to the material properties.

Yields for 400HB steel are in the region of 100MPa with tensile strengths of about 1250MPa.

It is not registered at international standard association such as ASTM Jin, Din so each manufacture has their own Brand name like HARDOX, ABREX, SUMIHARD, RAEX, JFE, XAR, BIS.

Each one delivering factory has its own restrictive compound creation and hotness treating methodology. Vandan Steel & Engg. co. Pvt.Ltd. provides best quality of AR 400 plates in different shapes and sizes.These steels ought not be utilized for structural or principle burden bearing parts on account of the likelihood that fragile break may happen in these high hardness steels at the high push levels experienced in such applications.

APPLICATION

A.K.A: Abrasion Resistant Alloy: AR400 ASTM: ASTM A514 (Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding) Characteristics: Smooth, dark scale finish. Hardened surface. Workability: Good candidate for some processing techniques.

AR 400 PLATE,AR 400 PLATE Suppliers, AR 400 PLATE Stockists, AR 400 PLATE Exporters, AR 400 PLATE Traders, AR 400 PLATE Dealers, AR 400 PLATE Importers, Authorised Distributors Of AR 400 PLATE, AR 400 Plates,AR 400 Plates Suppliers, AR 400 Plates Stockists in Mumbai, India.

#AR 400 PLATE

0 notes

wearplatesindia · 2 years

Text

AR 400 Plate

The key quality for wear resistant steels is their hardness. We sell wear plate according to its hardness measured on the Brinnell Hardness Test- usually in 400HB grades.

Wear resistant steels are not appropriate for use at temperatures over 250 degree C as the heat can cause changes to the material properties.

Yields for 400HB steel are in the region of 100MPa with tensile strengths of about 1250MPa.

It is not registered at international standard association such as ASTM Jin, Din so each manufacture has their own Brand name like Rockhard 400, ABREX, SUMIHARD, RAEX, JFE, XAR, BIS.

Each one delivering factory has its own restrictive compound creation and hotness treating methodology. Vandan Steel & Engg. co. provides best quality of AR 400 plates in different shapes and sizes.These steels ought not be utilized for structural or principle burden bearing parts on account of the likelihood that fragile break may happen in these high hardness steels at the high push levels experienced in such applications.

APPLICATION

#AR 400 Plate Suppliers in Mumbai #AR 400 Plate #AR 400 Plate Exporters

0 notes

gyaniguru03 · 3 years

Photo

AR 400 plate in India

#AR 400 plate in India

0 notes

brooklynmuseum · 4 years

Photo

Join us for a virtual tour of Judy Chicago’s The Dinner Party by Curator Carmen Hermo. An icon of twentieth-century art, a watershed moment in feminist art and thinking, and one of the most popular artworks in our collection, The Dinner Party celebrates the achievements of 1,038 women in Western culture, and sits at the heart of the Elizabeth A. Sackler Center for Feminist Art. It’s also a perpetually popular destination for intergenerational family visits. We wish all mothers and caretakers a Happy Mothers Day!

Judy Chicago’s monumental The Dinner Party was created between 1974–79. The artwork takes the form of a meticulously executed banquet table set for 39 individual women; each woman is honored with a hand-painted and formed ceramic plate, and an elaborate needlework runner. On the hand-cast Heritage Floor, the names of 999 other women stream out in relation to those at the table, visually representing women’s vast contributions in nearly every aspect of history.

Before entering the installation, you are greeted—and guided— by six woven tapestries, decorated with abstract imagery that evoke motifs on The Dinner Party. They convey Chicago’s vision for an equitable world, where women’s histories and perspectives are valued.

“And She Gathered All before Her,

And She made for them A Sign to See,

And Lo They saw a Vision…”

The Entry Banners are the first thing you see, but were the final objects made for The Dinner Party, woven at the San Francisco Tapestry Workshop in a feminist adaptation of Renaissance techniques.

Photo: Donald Woodman, ARS

Entering The Dinner Party’s purpose-built gallery (designed to protect fragile textiles on long-term view), the striking, iridescent ceramics of the plates and Heritage Floor catch the eye— it’s immediately conveyed that this massive artwork is meant to elevate and honor women’s histories.

Image courtesy Through the Flower Archive and Judy Chicago

Judy Chicago recalls that her education, from childhood to grad school in the 1960s, both purposefully and passively conveyed to her that women did not contribute to civilization. Part of the project of The Dinner Party was an immense research effort, to provide accurate information and context about women in history. In this image, Chicago and other workers research some 3,000 women, informing the final selection of 1,038 in the artwork.

Chicago wanted to re-write the history that she was taught: The Dinner Party subverts the dominant narrative of Western civilization by re-telling it through women’s achievements.

Each woman’s unique place setting shares these components:

A hand-painted ceramic plate, featuring Chicago’s vulvar “central core imagery”

An embroidered runner, with historically accurate needleworking techniques from that woman’s era

And a golden ceramic chalice, lustrous cutlery, and napkin as accents.

Here, “historically accurate needlework” meant that The Dinner Party studio workers actually skinned a deer themselves, in a nod to prehistoric living!

Each wing features 13 women. The 8th place setting is dedicated to Hatshepsut, who was a Pharaoh of Egypt some 3500 years ago, and known as one of Ancient Egypt's most successful leaders, establishing vast trade networks and commissioning hundreds of buildings and monuments during her prosperous, peaceful reign.

Judy Chicago valued accuracy as well as visual symbolic meaning. Brooklyn Museum curators and Egyptologists Ed Bleiberg ad Yekaterina Barbash translate the embroidered hieroglyphics for us:

That first row reads “Effective One, Living One, Favored One of the City (Thebes).”

On the second wing, a place is set for the writer, philosopher, and mystic nun Hildegarde of Bingen, a 12th century polymath renowned to this day for her musical and lyrical chant compositions.

Judy Chicago drew on medieval art’s clarity of form, which educated illiterate believers about the Bible. The Dinner Party helps inform viewers who may not know women’s historical contributions.

Every element of The Dinner Party conveys a distinct detail about the woman represented, or a symbolic reference to all women’s oppression and erasure.

If you were standing in front of Hildegarde’s place setting, you wouldn’t be able to see this amazing embroidery on the back of the runner depicting her visionary drawing. Instead, you can only see it by moving around the table, and reading “through” and “across” history, alluding to how we all must work to question and expand our collective stories.

Personally, my favorite moment is the stunning runner for astronomer Caroline Herschel. Judy Chicago’s design, executed with lyrical skill in crewel embroidery by ecclesiastical embroiderer Marjorie Biggs, gives a spinning sense of Herschel’s telescopic view of our universe.

Curatorial assistant, Jenee Daria describes this place setting:

“Mary Wollstonecraft authored ‘A Vindication of the Rights of Woman,’ 1792, considered the earliest and most important treatise advocating for equality and education for women. The butterfly and vulvar motif on Wollstonecraft's china-painted plate, and its multidimensionality, represent Wollstonecraft's will and intelligence which metaphorically undulate by the strength of such vibrant hues and the power of her testimony.”

“The embroidered runner incorporates meticulous needlework, petitpoint, embroidery, crochet, and stumpwork to create a visual narrative of Wollstonecraft's life and an embodiment of the limitations of her environment.” - Jenee Daria

Here, Wollstonecraft stands outside a schoolhouse where children are taught “The education of girls is a right not a privilege!” Her youngest, Mary Shelley, would go on to write the literary classic “Frankenstein.”

The 39th and final woman at The Dinner Party is artist Georgia O’Keeffe. The dramatic dimensionality of the plate symbolizes her artistic liberation, as well as her great success in the early 20th century amidst a hostile and male-dominated art world. Ending The Dinner Party with an artist with such a pivotal influence on feminist artists of her day, Judy Chicago emphasizes the importance of knowing one’s lineage.

Judy Chicago worked on The Dinner Party alone at first, and as the concept evolved into its truly epic scale, more than 400 collaborators worked to complete it, an undertaking that took five years. This detail is from one of three “Acknowledgement Panels” that traveled with The Dinner Party and are preserved at the Brooklyn Museum and available on our website.

Despite this, the scheduled museum tour was cancelled after a wave of dismissive reviews from art critics: some saw the work as “kitsch,” and even “pornographic” due to its vulvar motifs. This replicated the rejection women have faced across history, while proving how radical Chicago’s reclamation of vulvar forms really was— even for the presumably avant-garde art world.

Image caption: Brooklyn Museum Libraries and Archives

Here we see people lining up at Brooklyn Museum—we hosted The Dinner Party in 1980-81 thanks to local activism and fundraising efforts. It was so popular, it marked the first time we rolled out timed tickets!

In 2002, the Elizabeth A. Sackler Foundation gifted The Dinner Party to the Brooklyn Museum, establishing a plan for the Elizabeth A. Sackler Center for Feminist Art, which opened to the public in 2007. We are so lucky to have this epic and important work on permanent view at the heart of our feminist galleries, and hope we can soon welcome you back to explore it in person for years to come.

Want to know more? Access the Brooklyn Museum’s rich online resource guide here. Including detailed entries on all 1,038 women featured in the work!

Thank you for joining us on our tour of Judy Chicago’s The Dinner Party. Join us next week for another tour of our galleries!

Judy Chicago (American, born 1939). The Dinner Party, 1974–79. Ceramic, porcelain, textile installation. Brooklyn Museum; Gift of the Elizabeth A. Sackler Foundation, 2002.10. © Judy Chicago/Artists Rights Society, NY. (Photo: Donald Woodman/ARS, NY)

#virtual tours #judy chicago #the dinner party #virtualtours #art #art museums #art history #brooklyn museum #contemporary art #feminist art #feminism #feminist #artist #nyc

420 notes · View notes

chhajedabrex · 2 months

Text

Abrex 450LT Plates

Abrex 450LT Steel Plates In Mumbai, Abrex 450LT Steel Plates Suppliers In Mumbai, Abrex 450LT Steel Plates Exporters In Mumbai, Abrex 450LT Steel Plates Importers In Mumbai, Abrex 450LT Steel Plates Authorized Distributer In Mumbai, Abrex 450LT Steel Plates Dealers In Mumbai, Abrex 450LT Steel Plates Stockists In Mumbai,AR 450 BHN Plate, ABREX 450 HBW Plates, ABREX 450LT Plates Stockholders, Low-Temperature ABREX 450 Steel Plates Dealer, Abrex 450 Liner Plates Distributors In Mumbai.

Abrex 450LT Steel Plates In India, Abrex 450LT Steel Plates Suppliers In India, Abrex 450LT Steel Plates Exporters In India, Abrex 450LT Steel Plates Importers In India, Abrex 450LT Steel Plates Authorized Distributer In India, Abrex 450LT Steel Plates Dealers In India, Abrex 450LT Steel Plates Stockists In India,Abrex 400 Wear Resistant Sheet Plates, Sumihard 500 Wear Resistant Sheet Plates And Sumihard 450 Abrasion Resistant Sheet, Abrex 600 Wear Resistant Sheet Plates Manufacturer In Mumbai, India.

ABREX 450LT STEEL PLATE SPECIFICATION

ABREX 450LT CHEMICAL COMPOSITION

C *)

Si *)

Mn *)

Cr *)

Ni *)

Mo *)

B *)

Max %

0.26

0.7

1.6

0.025

0.01

1.40

1.50

0.6

0.005

MECHANICAL PROPERTIES OF ABREX 450LT STEEL PLATE

Thickness

Hardness HBW

Typical yield strength MPa,

min - max 1)

not guaranteed

3 - 80

425 - 475

1100 - 1300

(80) - 100

410 - 475

1050 - 1300

(100) - 130

390 - 475

1000 - 1300

Thickness mm

-5

5 - (10)

10 - (20)

20 - (40)

40 - 80

(80) - 130

CET (CEV) Max

0.37 (0.48)

0.38 (0.49)

0.39 (0.52)

0.41 (0.60)

0.43 (0.74)

0.41 (0.67)

CET (CEV) Typical

0.29 (0.39)

0.33 (0.45)

0.36 (0.48)

0.38(0.56)

0.38 (0.61)

0.39 (0.64)

For More Information:

Visit Our Website: https://www.abrexplate.com

Contact No: 022-23893665

E-Mail ID: [email protected]

0 notes