#20-200mm

[blur-from-the-north]

August 20, 2024. Oulu, Finland. Nikon D780, AI Nikkor 200mm f/4. AI denoising (though my noise still has noise in it)

I swear I tried to take a proper photo of the supermoon, but I literally had 5 minutes to take this picture before the Moon went behind the big honking cloud cover for the rest of the night. Damn.

[oneesanmarket]

Tsukiuta: Mutsuki Hajime - Kuro Tsuki Ver. Long Cushion

Size: W=200mm (7.8in)  L=500mm (19.5in)

Price: 20€/25 USD

(Shipping price Not included)

Units Available: 1

(Send us a message or comment if you’re interested)

[livefromphilly]

Sony RX100 VII Thoughts After Two Months

PROS:

Stacked sensors are the future. Well, technically the present considering that Canon, Nikon, Sony, Fuji, and OM Systems all use stacked sensors in their top of the line cameras. Either way, finally getting to experience shooting with one on a daily basis has made me want one in pretty much any camera going forward. The benefits are twofold: Not only do you get shutter speeds up to 20 frames per second, and without a mechanical shutter flipping in the way obscuring your view in between shots, but you also get no rolling shutter while doing it. Pretty much every Sony camera can shoot 10 fps bursts with the silent shutter, but any movement can give you a jello-like effect since the sensor reads out so slow on non-stacked cameras. The only con, at least on this camera, is that you can’t shoot flash at higher than 1/100 with the electronic shutter. That’s still plenty fast for a lot of stuff, but well below the 1/2000 you get when shooting the mechanical shutter. 

The fast frame rate wouldn’t make much of a difference if the camera was bad at autofocusing, but this camera is great at it. It has a lot of the same fancy focusing stuff that my full frame Sony has like human/animal eye autofocus and all the tracking modes I’m used to. It actually makes the camera pretty solid for wildlife if you can get close enough at the 200mm end. 

Speaking of that, the 24-200mm equivalent is a great range, and one that I missed a lot since I traded away my Tamron 28-200 to help cover the cost of my A7RIV. The small size and extra 4mm on the wide end actually makes it even more convenient than that Tamron. 

Aside from covering a broader range than the 24-70 equivalent lens from the older RX100 cameras, this lens also seems noticeably sharper. The last RX100 model I had, the Mk. IV, just didn’t seem as crispy as this lens is. 

It has a touchscreen! It’s wild to think that the previous RX100 cameras I owned didn’t have this basic ass feature, but Sony was very late in putting touch screens in their cameras. Ironically, I don’t really use it in this one because the AF is good enough that I can just do focus and recompose with tracking. 

CONS:

It’s still only a 1” style sensor so high ISO isn’t the cameras strong suit. Programs like DXO PureRAW help a lot and let you get somewhat usable images at ISO 6400 in a pinch, but you’re kinda pushing things at that point. 

While the lens is sharper and covers a wider range than the older models, it’s also significantly slower. At 24mm equivalent it’s already at f/2.8 where the old cameras were f/1.8. It’s f/3.2 at 25mm, f/3.5 at 33mm, and f/4 at 40mm. From 109mm to 200mm you’re at f/4.5. The relative slowness of the lens combined with the small sensor means that this can struggle getting quality images in low light without a tripod or something. 

No USB-C. My Fuji, Ricoh, and larger Sony all have USB-C charging, which is amazingly convenient when traveling. I haven’t really gone anywhere with this camera yet, but having to account for a micro USB cable is annoying since pretty much everything aside from my iPhone uses USB-C. 

It’s expensive. Just like my Mk III and Mk IV I got it used so it was cheaper than retail, but the copy I got cost about twice what I paid for the previous models. 

Start up time is just a tad bit slower than I’d like. The GRIII and X100V both beat it that regards, albeit those aren’t zoom lens so I have to cut the Sony some slack. 

SAMPLE PHOTOS: 

(The sample photos were edited in Lightroom Classic and DXO PureRAW2. Also, the sensor creates a roughly 2.7x crop factor, so the 9-72mm lens equates to 24-200ish)

Young Bird | ISO 160. 72mm. f/4.5. 1/200. 

Graffiti Shot from a Car | ISO 100. 33.98mm. f/4. 1/400.

Stickers | ISO 100. 29.67mm. f/4.5. 1/100.

City Hall | ISO 100. 38.13mm. f/4.5. 1/200. 

Flip Up Screen Selfie with My Friend Hanae | ISO 3200. 9mm. f/2.8. 1/40. 

Zoomed in Graffiti | ISO 640. 72mm. f/4.5. 1/500. 

Fishing Store Neon | ISO 800. 28.67mm. f/8. 1/200. 

Flowers | ISO 200. 72mm. f/5. 1/640.

Selfie Shots with My Sister | ISO 3200. 9mm. f/2.8. 1/100. 

[allthebrazilianpolitics]

Brazil, Rio Grande do Sul | Floods - DREF Operation Update n° 2 (MDRBR011)

Between 29 April and 4 May, heavy rainfalls devastated Rio Grande do Sul, Brazil, causing floods, landslides, and mudslides. This catastrophic event, the worst climate disaster in the state's history, affected 478 out of 496 municipalities. Over 1,000 millimetres of rain fell during this period, leading to significant destruction.1 By 10 July, the Brazilian Civil Defense reported that 2,398,255 people were affected, with 806 injuries and 182 deaths.2 The disaster displaced 422,753 people, with 10,793 still residing in temporary shelters as of 14 June.3 Along the first month of the crisis, water levels decreased in most areas, allowing some displaced families to return home and begin cleaning up their houses.

However, on 16 June, new floods and heavy rains hit the state, with an average of 200mm of rainfall in 24 hours. Further floods affected 19 municipalities along the Caí, Cadeia, and Sinos rivers, prompting evacuation messages. In some municipalities, such as Porto Alegre, the percentage of people in shelters rose again to 20% of its citizens nearly 2 months after the crisis. Besides basic needs such as clothes, food, hygiene and cleaning items, the prolonged period in shelters adds a heavy psychological toll on the affected communities.

Despite the challenging conditions and re-start of the floods, two months after the disaster date, there have been some signs of recovery. Based on figures from the Rio Grande do Sul Government, the number of people displaced in shelters has decreased by 64% from the previous reporting period, reflecting a gradual return to normalcy for some families.4 However, as of 16 July, 3,915 individuals remain in temporary shelters, highlighting the ongoing need for humanitarian assistance.5

Continue reading.

[calleryphoto]

🌇

•

📸 @CalleryPhoto

📍 Hung Hom, Hong Kong

🗓 2023. 11. 20

💻 Lightroom

🎞 Single Frame

•

Social:

IG. FB. Threads. Twitter. LINE. VERO. Flickr. Tumblr. Pinterest: CalleryPhoto

— — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — —

• Panasonic LUMIX S1 @lumix

• Canon EF 70-200mm f/2.8L IS II USM

• Sigma Mount Converter MC-21 ( EF - L )

• iFootage Gazelle FastBowl TC7 Tripod

• Leofoto G4 Geared Head

• Leofoto GR-2 Geared Panning Clamp

— — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — —

[aryburn-trains]

GO 533 50G Milton ON June 20 2002 200mm 3273_edited-2

In 2002 GO Transit was still deadheading their Milton Line trains between overnight storage in Guelph Jct and Milton. Here's a morning train dropping downgrade into Milton through the Kelso area.

[eclipse89]

finally got a shot of melotte 20, the alpha persei cluster

i’ve been wanting to try this one for awhile now, it’s a really huge cluster (didn’t even zoom all the way to 300mm, it would’ve filled the frame completely)

ISO 6400 / 200mm / F/5.3 / 6 minutes of exposure (133x3s)

[ethanbarberco]

an early morning skyline sunrise (circa 2017) 🌞🌇✨ you may already know this, but I was born and raised in central new jersey. after graduating college in florida, I lived on the jersey side of manhattan from 2017-2021. even though I feel incredibly grateful to now call manhattan home, I sometimes get a little homesick for my jersey life. going through old photos, and seeing the skyline from across the river has me feeling homesick for the view. I currently live just a 15-20 minute drive away from my old nj apartment, but sometimes it feels like a million miles away. I think it’s time I hopped back on the PATH train for a day trip ✨ nikon d3300 80-200mm lens #ethanbarberco #newyorkphotographer #sunrisephotography #architecture_hunter #newyorkcityphotography (at Hoboken, New Jersey) https://www.instagram.com/p/CooEpYJOHyh/?igshid=NGJjMDIxMWI=

[takebestlaptop]

is cooling pad necessary for laptop Top 11 Cooling Pad Review

A cooling pad is an essential part of your laptop. If you have a laptop without a cooling pad, it will be too hot to touch. It will make your laptop uncomfortable and you will have to take it off from time to time.

is cooling pad necessary for laptop? The answer is no. 

In This Blog, We Will Review the Top 11 Cooling Pads Which Are Top Of The Year

is cooling pad necessary for laptop

If you have a laptop computer, you probably already know that your laptop can get quite warm. Your laptop can get quite hot and you might not like it. You might not even be able to type accurately or look at your computer screen properly if it gets too hot.

Your laptop screen can get quite bright as well. However, there are ways to cool your laptop. One of the best ways is with a laptop cooling pad.

Most laptop computers come with a built-in cooling pad. However, you may need to buy a separate cooling pad to ensure that your laptop is kept cool. In some cases, your laptop doesn’t come with a cooling pad. You should still be able to buy one.

How to choose cooling pad for laptop

What a laptop needs is a good cooling pad. The pad should be big enough so that it covers the laptop screen. There should be enough space around the laptop to allow the air to circulate freely. The pad should be made of material that allows the air to pass through the pad and circulate around the laptop.

There should also be vents on the pad that allow the air to pass through.

Top 11 Cooling Pads

1. Kootek 12″-17″ Laptop Cooling Pad

There are many ways to cool your laptop. Some people use the fan on their computer, while others use a laptop cooling pad. I will be talking about the best laptop cooling pad, which is the Kootek 12-17 inch laptop cooling pad.

This is a laptop cooling pad that has 5 fans and 2 USB ports. This laptop cooling pad has a unique design, so you can adjust its height and angle of it.

Key Features

5 Fans

2 USB Ports

Unique Design

2. Cooler Master Notepal U2 Plus V2

It’s the best laptop cooler ever! It has a cooling pad that can be moved to any position on the laptop and the fans are moveable, so you can adjust the speed of the fan to suit your needs. The cooler has a lightweight aluminum alloy and a durable polyester fiber dacron material.

Key Features

It has  2 adjustable fans

Its Fan can be moved to any position

it is Lightweight

3. Thermaltake Massive 20 RGB Cooling Pad

The Thermaltake Massive 20 is a high-quality cooling pad for laptops, netbooks, and desktops. It features a steel mesh panel with a single 200mm fan that can be used to cool down your laptop. The fan is powered by two 6-pin connectors.

The fan has a maximum speed of 1000rpm and a minimum of 400rpm. The Thermaltake Massive 20 is made from high-quality materials that are easy to clean. It is suitable for all types of laptops and netbooks.

Key Features

steel mesh panel

It Can use for netbooks and laptops

It has 600 rpm speed

lightweight

4. Targus 17-inch Dual Fan Lap Chill Mat 

The Targus 17-inch Dual Fan Lap Chill Mat – Soft Neoprene Laptop Cooling Pad, Heat Protection Laptop Cooler, Dual-fan Heat Dispersion, USB-A Connection Laptop Fan is a convenient way to keep your laptop cool while you’re on the go. It can be used to keep your laptop cool and comfortable when you’re on the go.

Key Features

Dual Fan

USB Connection

Comfortable Design

5. KLIM Wind – Laptop Cooling Pad

KLIM Wind – Laptop Cooling Pad is an original cooling fan for laptop. It has a special design of a laptop stand and 4 cooling fans. It can keep your laptop cool during working.

It is a perfect solution for you when you are using laptop for a long time. KLIM Wind – Laptop Cooling Pad is the most powerful rapid-action cooling fan. It can cool your laptop up to 5 times faster than other laptop cooling fans. This fan is also suitable for PS5, and PS4.

Key Features

It has 4 Fans

Fastest Speed Up to 1200 RPM

Suitable For PS4,PS5

6. ENHANCE Gaming Laptop Cooling Pad

is one of the best gaming laptop stands. It has a sleek design and is easy to assemble.

This cooling pad is perfect for people who want to have a comfortable gaming experience. It has a very sleek design and the color makes it attractive. It is lightweight and portable.

The adjustable height is another great feature. It is comfortable to use and the size is just right. It has 5  fans.

140mm fan at 1264 RPM and 4 smaller 70mm fans at 2630 RPM. They provide extra cooling. They are high–performance and ultra-quiet. These fans have high speed.

The dual USB ports can charge your laptop. The fans have blue LED lights and they glow while they spin. This pad is perfect for 17 inch laptops. It has 3 year’s warranty.

Key Points

Key Points

It Comes With 5 Fans.

It has dual USB ports.

it has 3 years warranty.

7. DEEP COOL N80 RGB Laptop Cooling Pad

This cooling pad can be used with a maximum capacity of 17.3-inch notebooks. Its unique shape allows a perfect fit for all types of laptops, including ultrabook.

It includes two 140mm fans for improved airflow to the cooling pad. It also has an RGB lighting feature which allows you to display the color you desire at any time. It is compatible

with both Windows 7,8 and 9,10,11.

Key Features

2 Fans With 140mm

It Has 16.7 Million RGB Color

Full Metal panel

8. FLAGTOP Laptop Fan Cooling Pad with 2 Big Fans,

With the FLAGTOP Laptop Fan Cooling Pad with 2 Big Fans, Compatible with 14 – 15 inch Computer, Lightweight, Quiet, Slim, Portable Laptop Cooling Fan with 2 in 1 USB Port, Blue LED Light, and Adjustable Stand, you can easily and quickly cool down your laptop. This cooling pad is made of a highly efficient material that allows it to absorb heat very fast. The design of this product makes it possible to fit perfectly in your hand, which makes it convenient to carry out. It is lightweight and can be used to cool down your computer even when it is in full use. It has an ergonomic design and can be adjusted for use as a laptop stand.

Key Features

2 Big Fans

2 in 1 USB Port

Led light

9. Aluratek Slim USB Laptop Cooling Pad

The Aluratek Slim USB Laptop Cooling Pad (Supports Up to 17″) – ACP01FR

it Supports MacBook Pro, MacBook Air, Chromebook, Ultrabook, netbooks, and all laptops up to 17 inches

it has Dual 5-inch diameter high-performance fans spin quietly at 800 RPM

Made in ChinaFans create a continuous and evenly dispersed flow of cool air beneath your laptop

Metal mesh surface optimizes airflow to enhance cooling performance and heat displacement

USB bus powered – no external power adapter required

Provides a stable angled surface so you can work on your computer in comfort

USB cable neatly tucks underneath for easy cable management

USB port conveniently located near the bottom of the laptop

Key Features

Supports MacBook Pro, MacBook Air, Chromebook, Ultrabook, netbooks and all laptops up to 17 inches

Dual 5 inch diameter high performance fans spin quietly at 800 RPM

Metal mesh surface optimizes airflow to enhance cooling performance and heat displacement

10. Rosewill RGB Laptop Cooling Pad

The Rosewill RGB Laptop Cooling Pad, Gaming Laptop Cooler for 12-17 Inch Laptops, Big Quiet Fan, LCD Control Panel, Adjustable Angles, Lighting Modes, 6 Fan Speeds, 2 USB Ports This is a cooling pad that can be used to cool down your laptop. It has an LCD control panel on it so that you can see the speed of the fan and other important things. You can switch on the color settings as well. It is really easy to install this cooling pad and adjust its angles.

This is a perfect cooling pad for gaming or watching movies on your laptop.

Key Features

6 Fans

2 USB Ports

LCD control panel

11. Fosmon 4 Fan Cooling Pad

Fosmon’s laptop cooling pad is an efficient and powerful way to keep your laptop, notebook, Macbook or other devices from overheating. This laptop cooling pad features dual USB ports, which means you can connect to other devices and charge them through it. It is also equipped with two USB ports for power, making it easy to charge the device you are using, including a mobile phone, tablet or smartphone.

Key Features

4 Fans

Quiet Cooler Fan

Led control

[thedesithakur23]

3D printing has proved to be extremely useful(Part-1)

3D printing, also known as additive manufacturing, creates three-dimensional objects from a computer-generated design layer by layer. 3D printing is an additive process that involves layering material to form a 3D part. 3D printers have advanced significantly in recent years, and they can now play critical roles in a wide range of applications, including manufacturing, medicine, architecture, custom art, and design, and they can range from fully functional to purely aesthetic.

3D printers gained popularity quickly after they became commercially available. They proved to be extremely useful for manufacturers looking for a simple way to create parts for the items they produce. The first 3D printer was created 30 years ago, and this wonderful device has taken the world by storm since then. Let us now discuss mechanical and electronic accessories.

Types of Mechanical accessories:

Mechanical accessories are one of the main parts of the 3D Printer. Here are some of the Mechanical parts and their functions: -

2GT 20 teeth pulley wheel

LM12UU 12mm Linear Motion Bearing

GT2 Rubber Timing Belt Closed Loop

2GT 20 teeth pulley wheel

Timing Idler Pulley Wheel in Aluminum GT2 For 6mm Belt 20 Tooth 5mm Bore pulley; it will work perfectly with GT2 pulley-belt sets we sell in our store. This idler works well with the 20T GT2 driving Timing Belt Pulley. Many DIY 3D printer builders use idler pulleys made from 3D printed wheels. Because the outside diameter of the idler is not concentric to the rotation axis, an inaccurately printed idler reduces printing quality and causes vibrations. Other manufacturers employ double bearings with stationary washers clamped on both sides.

LM12UU 12mm Linear Motion Bearing

The LM12UU 12mm Linear Motion Bearings are ideal for linear motion in 3D printers, CNC machines, and other applications. It provides a linear motion system that is precise, safe, and dependable. These Bearings have standardized, interchangeable parts, so you don't have to worry about replacing any worn parts. The LM12UU Linear Motion Bearing A solid steel outer cylinder is used to manufacture high precision and rigidity linear motion bearings. In addition, the linear motion bearing has an industrial-strength resin retainer.

A linear motion bearing is made up of an outer cylinder, a ball retainer, balls, and two end rings. End rings keep the ball retainer, which holds the balls in the recirculating trucks, inside the outer cylinder.

GT2 Rubber Timing Belt Closed Loop

GT2 Rubber Timing Belt is a closed-loop with a width of 6mm and a length of 200mm that is used to generate linear motion, timing synchronization, torque and speed conversion, and other applications. The GT2 system's Grip is an extension of the HTD system with greater load-carrying capacity. It's a flexible belt with teeth molded into the inside surface.

The GT2 belt series is specifically designed for linear motion. They use a rounded tooth profile with a 2mm pitch to ensure that the belt tooth fits smoothly and accurately in the pulley groove, so there is no room for the belt to move in the groove when the pulley direction is reversed.

Stay tuned for the next part...

[sergndt]

Керамзитобетонные блоки полнотелые ширина 200 мм

Цена: 250.00 р.Керамзитобетонные блоки используются для строительства энергоэффективных построек. Ограждающие конструкции не требуют дополнительного утепления при эксплуатации в умеренном климате. В этом разделе представлены изделия размером 49 на 20 на 18,5 см с пазами и гребнями на торцах, гладкой верхней и нижней поверхностями. Керамзитобетонные блоки строительные «ТермоКомфорт» реализуются кратно поддонам, заказ от 14 м.куб.

https://xn--h1ad5a.xn--90ais/bloki-pgs/keramzitobetonnye/keramzitobetonnie-bloki-polnotelie-200mm

[ysy-sonya]

How much cnc lathe size?

Hello, everyone, this is HANBS, I am Sonya, recently I have been to the Mid-Autumn Festival ah, a while no share ah, of course, will not give up. So let's start today's sharing! Today I would like to share how much cnc lathe size. in fact, people who know cnc lathe know that there are still quite a lot of kinds of cnc lathe, so it is natural that its size will be a little different. cnc lathe size is varied, usually depends on their purpose, the size of the workpiece to be processed and the production needs. Here are a few key aspects of CNC lathe sizes:

1. Machining range

Maximum turning diameter: this is the maximum diameter of the workpiece that can be machined on a cnc lathe and usually varies between 150mm (6 inches) and 1000mm (40 inches). Small desktop grade cnc lathe usually machine diameters between 150mm-300mm, while large industrial grade cnc lathe can machine diameters up to 1000mm or more.

Maximum turning length:

This is the maximum length of the workpiece that the lathe can machine, usually from 200mm (8 inches) to 3000mm (120 inches) or longer. A small cnc lathe is suitable for shorter workpieces, while a large cnc lathe can machine long shafted parts (small ones also machine slender shafted parts).

2. cnc lathe external dimensions

The physical external dimensions of a cnc lathe depend on the machining capacity of its type:

Small desktop level cnc lathe: suitable for small parts processing, the general size of about 500mm * 1000mm * 1000mm.

Medium-sized cnc lathe: for medium-sized parts processing, with dimensions of about 2000mm*1500mm*1500mm.

Large industrial cnc lathe: can process large, heavy workpiece, size can reach 4000mm*2000mm*2000mm or even larger.

3.Spindle size

Spindle through-hole diameter: this refers to the diameter of the through-hole in the center of the spindle, determines the diameter of the bar that can be processed through the spindle. The diameter of the spindle through-hole of a small cnc lathe is usually 20-60mm, while the diameter of the spindle through-hole of a large lathe can exceed 100mm.

4.Lathe size

Bed length: determines the maximum workpiece length that the lathe can support. The longer the bed, the greater the length of the workpiece that can be processed. The bed can be from 500mm to 5000mm or even longer.

5. Other Considerations

Number and type of turret: small cnc lathes are usually equipped with a single turret, while large and versatile cnc lathes may be equipped with a double turret, or even have multi-axis control such as Y-axis, C-axis, and so on. Composite cnc lathe are usually equipped with multiple control axes.

Installation space: many people are actually concerned about this, so they ask for more details when purchasing a cnc lathe. When installing a cnc lathe, you need to consider the operating space. It is usually required to have at least 1-2m space around the lathe for operation and maintenance.

That's all for today's sharing, I hope it can help the people who need it, we will see you next time.

www.hanbscnc.com

[evanswerdloffars281fall24]

After dark

200mm, Fstop 8, ISO 200, 1s shutter; Center-weighted metering

50mm, F-stop 1.8, ISO 200, 1/50s shutter; Center-weighted metering

18mm, F-stop 20, ISO 200, 20s shutter, Center-weighted metering

55mm, F-stop 16, ISO 200, 4s shutter; Center-weighted metering

Motion Blur

55mm, Fstop 5.6, ISO 200, 1/2.5s Shutter; Matrix metering

55mm, Fstop 11, ISO 200, 2.5s shutter, Matrix metering

55mm, Fstop 11, ISO 200, 2.5s shutter; Matrix metering

18mm, F-stop 22, 10s shutter; Center-weighted metering

[floorinsite]

Karta relaunches with 18 new recycled leather floors

Sustainable wood flooring specialist Karta has launched a brand-new series of sustainable floors with 18 new, completely natural, toxin-free, and plastic free floors. 

The new series, the Recycled Leather Series, adds to Karta’s hyper-realistic wood collection, designed specifically for design professionals, developers, and contractors that want a perfect balance between sustainability, aesthetics and cost-effectiveness. Karta, owned by luxury wood flooring specialists Ted Todd, continues to set industry standards with this sustainable offering.

Karta’s Recycled Leather series is made from leather offcuts sourced from the shoe industry, with a further four layers including biodegradable wood composed of 100% PEFC certified natural fibres and resins, a cork backing for improved comfort and durability, a wood fibre layer for stability, digital print and finally each board is coated with Karta’s specially developed water-resistant barrier solution, resulting in an AC5 rated performance coat with a super matte finish.

Photo-realistic designs inspired by Ted Todd’s decades of expertise within the hardwood flooring industry is printed with biodegradable ink onto the planks, replicating the appearance of real wood. This innovative design provides an accessible alternative to traditional wood flooring options. There are no design repeats in 20 boards, to purposefully allow for a more natural and authentic finish with reduced visible repeats. Some of the floors have more character from plank to plank allowing for more contrast within the floor.

The Recycled Leather Series is part of a click system installation process, available in 18 serviceable colours including natural French oak, reclaimed oak and old brown English oak, all available in a wide plank measuring 1850mm x 200mm x 9mm. With no underlay or adhesive required Karta’s flooring is quick and easy to install, helping to reduce installation costs.

With this relaunch, Karta continues to lead the way in sustainable flooring innovation, providing high-quality, eco-friendly solutions that don’t compromise on style or functionality.

Founder Robert Walsh commented on the launch “We are incredibly excited about this relaunch, our new Recycled Leather Series not only showcases Karta’s commitment to sustainability but also introduces innovative design elements that offer unique, sustainable flooring solutions at an affordable price point. Karta aims to penetrate a new market by not only providing a budget-friendly alternative to traditional wood flooring, but also captivating customers interested in LVT flooring. Utilising waste materials to create new, long-lasting products really is the future of product manufacturing and we look forward to continuing exploring these methods at Karta.”

[the-worlds-point-of-view]

Lazy Yellow Days

2024 07 20

Sony a6000

Focal 200mm I:35

Mission Beach, California

[sakayahoshi]

M56

2024年7月1日

カメラ　Canon EOS Kiss X3

レンズ　Kenko Miltol 200mm f4.0

赤道儀　Kenko Skymemo T

撮影条件

200mm f4.0

ISO 3200 60秒　20枚

画像処理

Siril スタッキング　ダーク　フラット　GIMP