#1500W

[anmolsmsblog]

Cadlec Nova 1500W Shockproof Advanced Technology Electric Water Heater Immersion Rod With Waterproof & Protection | Instant Heating | ISI Certified 2 Year Replacement Warranty

Price: (as of – Details) Product Description Premium Nickel Finish: Adorned with chic nickel plating for unparalleled corrosion resistance and a sleek, modern look.Shock-Proof and Water-Proof: Built with advanced safety features including a shock-proof, water-proof design for enhanced protection and reliability.High-Powered Heating: 1500W immersion rod delivers rapid and efficient water…

[empevmobility]

1.5KW DC/DC Converter Unit

1.5KW DC/DC Converter Unit

Product Features

Adopt advanced high-frequency switching control technology, effectively reducing the size of the product, with the characteristics of high power density.

Support 240 ~ 450Vdc wide range input, flexible to adapt to different models.

High safety electrical isolation of input and output.

Meet the requirements of automotive-grade electromagnetic compatibility.

With functions of over-under voltage protection, over-current protection, over-temperature protection and short-circuit protection, providing safe and reliable assurance.

Standard CAN 2.0B interface design, supporting standard UDS diagnostic development.

Strategy can be customized according to the needs of the whole vehicle, and all software can be upgraded online.

Specification of 1.5KW DC/DC Converter Unit

1.5KW DC-DC Converter

Output power

1.5KW

Efficiency

95%

Input voltage

200V DC-420V DC

Output voltage

12-14V DC

Working voltage range

6-18V

Water proof

IP67

Heat Dissipation

Air cooling/Water cooling/Self-cooling

Control method

CAN 2.0B

Net weight

5.65KG

Dimension

307.5*180*108mm

Characteristics of 1.5KW DC-DC Converter Unit

In the application of DC/DC converters for electric vehicles, the use of smart switching technology enables efficient operation at higher frequencies. By using smart switching technology, the maximum switching frequency of the EV DC/DC converter can be increased to 1.5 kHz, thus increasing the charging efficiency of the EV to more than 80%. At the same time, the loss and temperature rise of the EV DC/DC converter can be effectively reduced by using smart switching technology.

For the design requirements of the DC/DC converter of electric vehicles, power control technology can be used to realize the control of the heat generated during the operation of the DC/DC converter. The power control technique enables efficient operation at lower frequencies.

[remcortechnology]

Remcor technology is a global supplier for the turnkey fiber laser cutting lines, which have around 18 years experiences, 5000 sets installations globally. No matter what type what size and how thickness your sheet material is, we can provide you the suitable equipment. Pipe Fiber laser cutting machine mainly been applied in metal pipes and tubes fabrications, with the character of fast speed, high precision or accuracy, environmental friendly, low power consumption, low table cost, and low maintenance cost. which is widely applied in fast cutting metal pipes of steel, stainless steel, carbon steel, aluminum, copper, galvanized steel, titanium alloy, gold, silver and other material. OEM ODM services are available.

Heavy Duty bed, apply the fully plate welding bed, with higher rigidity and durable use.

Compared with two chuck clamping or traditional metal pipes cutter. Three chucks equipment can realize the real zero tailing .processing details as the following descriptio.

More flexible for pipe cutting processing especially for extra heavy duty pipes or tubes, less swing or shake.Perfect accuracy and precision.

Heavy duty type load longer tailing material avaliable.

Apollo AK Two-chuck Tube Laser Cutting Machine 1000w-6000w Parameter Details

APOLLO BK SERIES-3 Chucks

Type

6020-BK

7025-BK

9025-BK

9034-BK

Power Range

1500-6000W

Chuck Structure

3 chucks

Tube Size

Round Type: 15-200mm Square

Round Type:15- 245mm

Round Type:15- 245mm Square

Round Type:15- 330mm Square

Type:15- 140mm

Square Type:15- 175mm

Type:15- 175mm

Type:15- 230mm

Positioning accuracy of X& Y

土0.05mm/m

Max Positioning speed X&Y

100m/min

80m/min

Max cutting length

6000mm

7000mm

9000mm

9000mm

Tail length

2 0mm

Max weight single tube

135KG

260KG

260KG

500KG

Max loading length

6000mm

7000mm

9000mm

9000mm

Fully Annealed Table

The bed body adapts the segmented rectangular tube welding bed with fully annealed treatment at over 600⁰. After tempering, the strength, rigidity and stability are guaranteed, the precision would be tested and debugged which can make sure the precision can be maintained for a long time. The table is equipped with automatic lubrication device, which ensure the moving parts operate in good condition and improve the service life of guide rails, gears and rack.

Follower Support

The follower support device will be optional. The follower support is mainly to assist in controlling the excessive deformation of cutting longer pipes (pipes with smaller diameter), and the servo motor drives the up and down movement of the pallet assembly. When the chuck moves to the corresponding position, the auxiliary support automatically drops for avoidance.

Smart Auto Focus Laser Head

Standard auto focus function, no need focus adjustment while changing sheet; Automatic tracking and accurately adjusting the focus according to the material thickness to ensure the best cutting effect of the whole board. Shorter perforation time, better perforation quality, high-speed cutting, saving time.

Intelligent CNC Operating System

It simplifies complex CNC machine operation and integrates CAD, Nest and CAM modules in one. From drawing, nesting to workpiece cutting all can be finished by a few clicks on big IPAD Screen. Realize the intelligent diagnosis, multi-threading operation, three-level perforation, laser energy control, adaptive edge-finding, automatic corner acceleration and deceleration, flight cutting, switching worktables, mechanical accuracy compensation etc.

Pneumatic Clamp Chucks

Pneumatic clamp design on both sides. The dual-chucks help reduce tube vibration to a minimum, guaranteeing high accuracy in even complex tube configurations at high cutting speed. Suitable for cutting a range of tube diameters from Ø20 mm to Ø220 mm and various wall thicknesses.

Front chuck

tube laser cutting machine front chuck

Back chuck

tube laser cutting machine back chuck

Fractional Automatic Support Technology

Applies the intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.

Equipped with two sets of variable-diameter support structures, which are automatically lifted by the cylinder to avoid the rear chuck in processing. When processing profiles with different diameters, manually turn the variable-diameter wheels to achieve fit and support for different-sized profiles. The variable-diameter wheels It can be supported every two degrees of rotation to reduce the diameter of the circumscribed circular tube by 2mm

[cosuper2023]

1500 WATT INVERTER CHARGER

The Cosuper CPT 1500w Inverter Charger, combining the functions of a pure sine wave inverter, battery charger and automatic transfer switch in one unit, is the ideal power solution for mobile, recreational vehicle or home and office applications. It features multi-stage charging, Internal transfer switch transfers between AC power and DC power, an pure sine wave output with high surge capability to meet power needs of inductive loads without damaging the equipment.

In the AC priority mode, when the mains AC power is cut off, the transfer relay is de-energized, and the load is automatically transferred to the inverter output. Once the AC mains is restored, the relay is energized and the load is automatically transferred to the AC mains.

FEATURES OF 1500 WATT INVERTER CHARGER

1500W pure sine wave

Could run all loads from households appliances to office equipment

Built-in 3-stage battery charger with compatibility of Lithium, Gel, AGM, Wet or customized

Approved by ETL under UL458 and CSA C22.2, CE under EN55022:2006+A1:2007 standards

[exrconsultancy]

Nutribullet NBT-0815 Smart Touch Blender Combo, 1500W - Menakart.com

The nutribullet® Smart Touch Blender™ Combo brings a world of blending possibilities to your fingertips. Whether you want effortless operation or full control, big batches or single servings, this versatile blender streamlines it all with a sleek touchscreen display and intelligent programs to suit every scenario. And with 1500 Watts of power, you can be sure your results will be smooth.

Includes:

(1) 1500W All Black Motor Base

(1) 64oz Pitcher

(1) Locking Pitcher Lid with Pour Spout

(1) Tamper

(1) Easy-Twist Power Extractor Blade

(1) 32oz Cup

(1) 20oz Cup

(2) To Go Lids

(1) Recipe Guide

Specifications:

Dimensions - 10.7" x 8.1" x 17"

Weight - 8.3 lbs

Cord Length - 39.3"

Buy Now Visit our website — www.menakart.com

[kuwdora]

that perennial fic writing experience. where you have the idea and you know the shape of the story you're trying to share. right? right. 😅

a bajillion months ago i had sent @witch-and-her-witcher some of my ciri fic draft. and after some back and forth about what was going on, here was Cee's conclusion:

i gotta tag @xianvar here 'cos i have said the same thing to them once upon a time and their big bang turned into a galactic 100k bang. i can hear them cackling already. @witch-and-her-witcher you were of course right. 😆 i've managed to write 300 words here and there for the last few weeks. all wrapped up in the ciri book feelings. and. well. here is the current wordcount next to my original wordcount goal:

14k of ciri feelings. and i think i've pretty much reached the part of the story that i had actually intended on writing when i first had the idea.

also i know @sassaffrassa will be pleased to hear that i didn't let myself get lost in all of the other story ideas that sprung up during the drafting process. 'Cause I remembered the core of what I wanted to explore with ciri and ye olde book events that got glossed for game canon. putting all the other ideas in a separate document so I don't get lost again. too many ideas.

i doubt it'll stay at 14k but i think (knock on wood) i have the foundation down by now. gonna try to get it into better shape in the next few weeks if i can keep my momentum going.

writing!!! am so tired. reading!! am so tired. but by god i am going slowly keep doing the things i'm enjoying. ❤️

[fqlaserwelder]

fiber laser welding for stainless steel plate, contact for distributing price from direct factory

[oyatemolly]

110v-380v halogen lamp

1120mm 240v 1500w    infrared heat lamp

1120mm 240v 1500w   halogen heat lamp

1120mm 240v 2000w   infrared heat lamp

[aggarwalevehicles]

Electric bikes have become increasingly popular in India, and many people are considering converting their traditional bikes into electric bikes using electric bike kits. While electric bikes offer a lot of benefits, safety is an important factor that needs to be considered before making the switch.

[ikramtipu23]

COSORI Electric Kettle with Stainless Steel Filter and Inner Lid, 1500W Wide Opening 1.7L Glass Tea Kettle & Hot Water Boiler, LED Indicator Auto Shut-Off & Boil-Dry Protection, BPA Free, Matte Black

Color:  Black BrandCOSORICapacity1.7 LitersMaterialBPA-Free, Stainless Steel, Borosilicate GlassColorBlackSpecial FeatureManual About this item THE PUREST WATER FOR YOU–Your kettle is made with superior-quality 304 stainless steel and borosilicate glass to keep your water safe and tasting pure for years to come COMPLETELY SAFE–No need to watch your kettle while it’s boiling. It automatically…

[harawata44]

【衝撃】セブンイレブンのお客さん用電子レンジ、超絶進化してしまうｗｗｗ

以下転載 https://x.com/Qman/status/1761631163633078640?s=20

最近のコンビニ(セブンだけ？)だとセルフレンジ(セルフレジではない)の庫内にQR読み取りがあって商品を入れると1500wでのタイマーが勝手にセットされるんだけどこういうスタイルがどんどん進むのかな。規格(QR)は既にあるから後はそれに乗っかるだけ。QR様々やでホンマ。

[eucanthos]

Toshio Saeki (JP, Miyazaki , 1945 - 2019)

Girl stepping on a dozaemon's butsubutsu-tenten head. From "Scarlet Dream" (20 year anthology of drawings for SM Selecto magazine)

Saeki as a child overheard some of the adults saying that "the dozaemon (drowned body) was swollen and covered with spots." From then on, Saeki's image of the deceased became butsubutsu-tenten (bumps and spots) stoped

The "butsubutsu-tenten" manner lasted almost 30 years. He had to attend the funeral of a relative's child and there he lost the specific visual reference of human dead bodies.

https://www.artsy.net/article/artsy-editorial-meet-master-japanese-erotica-heard

https://www.instagram.com/p/CX5B7gqveot/

https://x.com/AkaTakonet/status/1258851383043862532/photo/1

https://images.squarespace-cdn.com/content/v1/54c29093e4b03be870ff80c7/1615631788173-9B3HGE1JICB2M95YL4FJ/Toshio+Saeki+02%2C+Silkscreen%2C+2010.jpg?format=1500w

[acapelladitty]

For kinktober whatever is easier and for you<3 don’t over exhaust yourself just to write 31 fics for each day, we care about you and your wellbeing ditty 💕 🫂

I appreciate the concern, love 💜 it always gives me the big warm and fuzzies when folks show concern for my wellbeing so thank you very much 🥺 I can absolutely do 31 fics since I can start now and work on them slowly over the coming month with the fics ideally being around 700-1500w each.

My concern is that I'm gonna work all month only to get to October and have folk being sick of seeing them by day 6 💀 I don't mind doing it if I feel like people will genuinely enjoy it but I feel that the novelty will wear off quickly and folk will roll their eyes at me and get irritated. Is that paranoia? Probably. Is it a product of my insatiable need to people please? Absolutely! But c'est la vie xx