#0-4-2ST

[hazel-of-sodor]

Tonight a new engine, the

@talyllyn.co.uk 's own No.1 Talyllyn! Along with Skarloey and a few others. Don't worry, No.2 Dolgoch/Rheneas will be the next next engine.

[old-transport]

Furzebrook Railway 0-4-2ST engine 'Septimus' in 1947 by Frederick McLean Via Flickr: One of a collection of 3" x 2" amateur transport photographs, all dating between 1947 and 1952. This one was taken on the 19 Aug 1947 and is of the 2' 8" gauge Furzebrook Railway 0-4-2ST (saddle tank) engine 'Septimus'. 'Septimus' was built by Peckett in 1930, then purchased by the North Somerset Light Railway in 1955, but was not used, being scrapped in 1962. The Furzebrook Railway ceased operating in 1957. The photo reverse is annotated with "Furzebrook Railway 'Septimus', at engine sheds, 19th August 1947",and with the name 'I. H. Chambers' (the photographer?). Furzebrook Railway on Wikipedia:- en.wikipedia.org/wiki/Furzebrook_Railway If there are any errors in the above description please let me know. Thanks. 📷 Any photograph I post on Flickr is an original in my possession, nothing is ever copied/downloaded from another location. 📷 -------------------------------------------------

[kurikive]

MINECRAFT — 12. newjeans killed me in minecraft

▶️ play !

The video starts with Y/N jumping into the frame of the main camera, five figures slowly emerge from the row of monitors behind her with barely audible giggles.

“TODAY! We’re playing Minecraft.” The girl turns to look at the left right camera, “And by ‘we’, I mean me and some special guests.” Y/N steps out of frame and the five figures, who had their backs facing the camera, turn to show themselves with a very unsynchronized jump.

“Hello! We’re NewJeans!” They yell in-between laughter. A close up of Y/N laughing from the left camera shows up on screen.

“I heard you guys are good at Minecraft.” Y/N comments, making the five girls look at her, followed by a couple of ‘Yes!’es.

“I’m just okay!” Danielle says out of the blue, which makes Y/N and a couple of other member laugh loudly.

“Let’s put that to the test, shall we?”

A transition cuts to a old-school fighter character catalog-like presentation of the members, their users and their skins, starting with Y/N’s

PLAYER 0: Koo Y/N (90wesung)

PLAYER 1: Kim Minji (njmj_04)

PLAYER 2: Pham Hanni (hankillz)

PLAYER 3: Danielle Marsh (BuildMasterMDN)

PLAYER 4: Kang Haerin (HR06CRAFT)

PLAYER 5: Lee Hyein (GraciouslyMining)

“hankillz is crazy, by the way.” Playful banter already starts from the first minutes of the video. Hanni laughs from a few seats to Y/N’s left. “You’re playing Build Battle with that name.”

“Hey! At least I’m not BuildMaster!” Hanni looks at Danielle from across the rows of PCs, who just smiles proudly at her username choice. “I think it describes me pretty well!”

“Anyways, as you’ve heard. We’re playing Build Battle!” The video pauses and a little green screen cutout of Y/N's character Widdung appears from the bottom of the frame.

"But before we do that, let me explain the rules!" The little alien cat starts talking (it's just Y/N's voice pitched up), "The NewJeans members are competing for a prize. The competition will be divided into three rounds. Build Battle, Bedwars, and the Final Hunger Games."

"The member that accumulates the most points from the first two rounds will battle with Y/N on a 1v1 Minecraft Hunger Games battle! If said member wins, she wins a box of expensive beef! If Y/N wins..." There's a moment of silence when the little character looks around, "Well, they get the beef anyways as a trophy for their efforts!"

Widdung smiles and jumps cartoonishly, "Let's begin!"

TIME SKIP -> END OF ROUND

1ST PLACE: DANIELLE (100 pts)

2ST PLACE: HYEIN (93 pts)

3RD PLACE: MINJI (79 pts)

4TH PLACE: Y/N (72 pts)

5TH PLACE: HAERIN (65 pts)

6TH PLACE: HANNI (60 pts)

"As expected from Build Master Mo Dani!" Hyein says while looking at Danielle with a proud smile, the latter looking shocked, a whimsical sound effect enhancing the depth of her surprise.

"Wha- I LOST?!" Hanni was also shocked, but in the opposite context. Her disappointment was overshadowed by the pure disbelief in her expression, amused at the way she got the lowest ranking.

"At least I'm not last." Said Haerin with a teasing smirk, rubbing the loss on Hanni's face. "Hey, Kang Haerin!" Hanni nagged at the younger, "Let's see about that next round!"

"As long as no SpongeBob characters are in the next round, you'll be fine I think." Minji teases, as usual.

"It's really hard to make stars in Minecraft, OKAY?!"

"Respectfully, you literally built a pink block." Y/N joins in on the tormenting of the girl, "You almost made pink SpongeBob, and the theme was Patrick..."

"I'll get my revenge..."

TIME SKIP -> END OF SECOND ROUND

1ST PLACE: DANIELLE (95 pts) TOTAL PTS: 195

2ST PLACE: Y/N (90 pts) TOTAL PTS: 162

3RD PLACE: HYEIN (80 pts) TOTAL PTS: 173

4TH PLACE: HAERIN (79 pts) TOTAL PTS: 144

5TH PLACE: MINJI (71 pts) TOTAL PTS: 150

6TH PLACE: HANNI (68 pts) TOTAL PTS: 128

"Danielle, literally, how are you winning?!" Hanni said with a twinge of frustration. "I can't leave the 60's!"

"This is my forte!" The younger smiled proudly at the other Australian, but it suddenly fades, "My only forte, actually. I'm cooked in Bedwars."

The comment makes Y/N laugh and the camera pans to her, "Hey! Have some confidence, girl!" She says in between laughter. "There's another round left!"

TIME SKIP -> END OF SECOND ROUND

1ST PLACE: DANIELLE (98 pts) TOTAL PTS: 293

2ST PLACE: HYEIN (92 pts) TOTAL PTS: 265

3RD PLACE: Y/N (91 pts) TOTAL PTS: 253

4TH PLACE: HANNI (85 pts) TOTAL PTS: 213

5TH PLACE: HAERIN (80 pts) TOTAL PTS: 224

6TH PLACE: MINJI (78 pts) TOTAL PTS: 228

"I TOLD YOU I WAS GETTING MY REVENGE!" Hanni jumps from her seat, startling the rest of the girls. "Suck on that!" She says mindlessly, making her immediately cover her mouth and blush, "Sorry, I didn't mean to say that."

The younger members and most staff had no idea what she had said and paid no mind to it, while the older girls tried their best to hold down their laughs and Hanni tried to mask her embarrassment.

"You still have the least points overall, bro." Minji pointed out, and Hanni's shame quickly morphed into disappointment.

"You can still twist the plot, Hanni." Y/N suddenly looks directly at the camera, deepened her voice and- "In Bedwars..."

The atmosphere turned cold until the girls exploded in laughter at Y/N's chaotic fail at an intimidating horror movie trailer voice. The latter could only chuckle. "At least they found it funny..." She mutters.

TIME SKIP -> BEDWARS ROUND 1 RESULTS

6TH: DANIELLE | 0 KILLS + first to die (10 pts) | TOTAL PTS: 303

5TH: HYEIN | 2 KILLS + bed destroyed (35 pts) | TOTAL PTS: 300

4TH: HAERIN | 3 KILLS + bed destroyed (55 pts) | TOTAL PTS: 274

3RD: HANNI | 6 KILLS + bed safe + killed by minji (100 pts) | TOTAL PTS: 313

2ND: MINJI | 9 KILLS + bed destroyed + killed by hanni (145 pts) | TOTAL PTS: 373

1ST: Y/N | 13 KILLS + bed safe + killed by minji (240 pts) | TOTAL PTS: 493

"Hello?! Why is Y/N almost in at 500 points already?!" Hanni complains, "Probably because we're playing with a professional, Hanni." Minji defends.

"Oh wow! Maybe not professional but I am pretty good!"

"You do this for a living, Ms. Satellite." Minji teases.

"Hate that! Never say that again." The camera focuses on Y/N's disgusted expression, and both girls laugh from beside each other.

Haerin, who was still at 200 points for some reason, suddenly speaks, "I need to lock in..." She says quietly, making Hanni laugh.

TIME SKIP -> BEDWARS ROUND 2 RESULTS

6TH: DANIELLE | 3 KILLS + bed destroyed (55 pts) | TOTAL PTS: 358

5TH: HYEIN | 7 KILLS + bed destroyed + killed by hanni (105 pts) | TOTAL PTS: 405

4TH: HAERIN | 8 KILLS + bed destroyed (155 pts) | TOTAL PTS: 429

3RD: HANNI | 9 KILLS + bed destroyed + killed by haerin (145 pts) | TOTAL PTS: 458

2ND: MINJI | 11 KILLS + bed destroyed + killed by y/n (185 pts) | TOTAL PTS: 558

1ST: Y/N | 12 KILLS + bed destroyed + killed by hanni (205 pts) | TOTAL PTS: 698

"Hanni unnie, I'm coming for you." Haerin had an evil smirk on her face that shocked Danielle, who was beside her.

"Keep trying, kid." The older responded, but inside she was scared of being dethroned, reflected in the video by a close up to her nervous face and an edited sweat drop falling down Hanni's face.

"The gap in points is insane, I am so sorry Danielle." Said an apologetic Y/N, but the younger girl brushed off her apologies coolly.

"I saw this coming, unnie. Do not apologize." Danielle smiled at the older, "I'm proud enough of my Build Master title."

"NEXT ROUND!" A tense Hyein in 5th place said.

TIME SKIP -> BEDWARS ROUND 3 RESULTS

6TH: DANIELLE | 5 KILLS + bed destroyed (95 pts) | TOTAL PTS: 453

5TH: HYEIN | 10 KILLS + bed destroyed + killed by danielle (165 pts) | TOTAL PTS: 570

4TH: HAERIN | 10 KILLS + bed safe + killed by hyein (180 pts) | TOTAL PTS: 609

3RD: HANNI | 12 KILLS + bed destroyed + killed by minji (205 pts) | TOTAL PTS: 690

2ND: MINJI | 14 KILLS + bed destroyed + killed by y/n (245 pts) | TOTAL PTS: 803

1ST: Y/N | 13 KILLS + bed safe + killed by hanni (240 pts) | TOTAL PTS: 930

"Can I say something about how this is so crazy?" Hyein says, "Minji unnie was horrible at Bedwars, like, a week ago."

"Yeah, are we sure she's not using cheats?" Danielle joins in.

"Bro, I swear, I don't know how she did it but she actually improved." Hanni defends honestly.

The camera pans to Minji, saying nothing but a suspicious smile on her face, being the only one who knew the reason for her sudden improvement was right next to her (she noticed from the start of the video and said nothing).

"Are you confident, Minji?" Y/N asks her final rival.

"I'm... yeah." She sounded oddly uncertain, "Yeah! I am!" She tried again, but everyone was already dumbfounded at her lack(?) of drive.

"I won't go easy on you if you were wondering."

"I wasn't."

TIME SKIP -> HUNGER GAMES 1V1 RESULTS

DURATION: 10 minutes, MINJI WIN!

Screen shows an extremely shocked Y/N. She was actually planning to go easy on Minji at first, but then she almost got killed at minute 3 by the latter and decided to actually play. Even then, Minji hunted her down relentlessly, leaving Y/N no choice but to surrender.

"My prize, please!" A smug smile appeared on Minji's face while her members cheered behind her. The scene cuts to Y/N slowly looking up at the camera with the same shocked expression she was left in.

The girls clears her throat after accepting her defeat, "Sorry. Let me get your beef." Y/N gets up from her seat and walks out of frame, Minji's eyes widened and her jaw drop.

"BEEF?!" The cheers of the other girls grew even louder at the mention of the prize, even when they themselves hadn't won it (Minji was going to share it with them anyways).

Y/N walks back into frame with the huge box in her arms, "Here you go! A win is a win!"

Minji and the girls looked astonished at the sheer size of the box, no less at the quantity of meat inside of it. None of them dare ask how much it cost, "Wow!" The five of them say in unison, and Y/N chuckles in adoration.

"Thank you so much!" Minji says as she receives the gift into her arms, she makes an inside note to ask a question to Y/N after the cameras stop rolling. "We- I'll eat this well!"

"Oh, absolutely!" Y/N says with a smile on her face, "Thank you guys so much for taking the time to join me today!"

"We're so grateful we got to play with you!" Danielle suddenly goes up to Y/N and shakes her hand, the older laughing at the sudden gesture.

"Oh! No, no! It's my pleasure to have you guys here!"

"I love your videos!" Haerin then says from beside Minji, "I'm subscribed to your channel!" She confesses all of a sudden.

"Wait, really? Oh, wow! Thank you!" Overwhelmed by the stream of praise and confessions, Y/N chuckles shyly while the rest of the girls line up to also shake her hand. She receives their compliments with a formal bow.

"We should play together again!" Hanni suggests, "I'll get my actual revenge next time!"

"I'm sure you will!" Y/N laughs at her own teasing, "I think it's time to wrap up. Thank you guys again for joining me today, and thank you guys," She faces the cameras, "for watching and joining us too!"

"Subscribe to isatellite!" Hyein says unanticipatedly and her members laugh.

"Thank you, Hyein!" Y/N pats the girls on the shoulder when she blushes with the regret of her own sudden actions, "Make sure to like, subscribe, and support NewJeans. They're social media and latest release will be linked in the description, but I'm sure you're already streaming it!" She jokes.

"Bye guys!" The six girls say in unison, and Y/N's outro plays. A cartoon Widdung on the side of Y/N's recommended videos to the sound of Right Now's instrumental.

27 minutes and 42 seconds, the screen fades to black.

🎥 replay ? ⁠ﾐ⁠ ⟲

masterlist | next

taglist # @yumtooki @saysirhc @modanisgf @yerimbrit @sixflame438 @miinatozakiii @hotluvlet @mym1na @keiji-jin @wintersgff @wonyoungssi @kimminjiissosjdirbidnsjje @shozeu @nwjnsloona @kaypanaq @pandafuriosa60 @linnnsworld @hwabyul4wheesun

[anumberofhobbies]

Corris Railway. 23rd September 2023

  Keef 0-4-2ST No10, which was delivered new only a few weeks beforehand. Almost, but not quite, a replica of the Hughes Falcon locos which used to run here. One still runs on the nearby Talyllyn Railway as No3 "Sir Haydn".

[toast-com]

Introducing Pipsqueak, the Angry Narrow Gauge Engine!

Based off of the South African Railways (SAR) Class NG2 0-4-2st:

[airmanisr]

Finland Steam Hyvinkaa by Neil Smith Via Flickr: 21 Jul 2013 VR Beyer Peacock Class B1 0-4-2ST 9 (1868) National Railway Museum, Hyvinkää, Uusimaa region, Finland.

[supertrainstationh]

Early years of Preservation - Talyllyn by Martyn Hearson Via Flickr: Several years ago I was given a box of slides by a widow who's former husband had leanings towards railway enthusiasm. I'd looked through the box several times, but last weekend I came across a roll or two of black & white slide film which I'd not noticed before. One of the better shots was this scene at Towyn Wharf station, (the HQ of the Talyllyn Railway), where I reckon the picture was taken in the early 1960s The loco is ex Corris Railway Kerr Stuart bulit 0-4-2ST No.4 'Edward Thomas'. Nowadays things look considerably different.

[cfun68]

Tham gia trò chơi Roulette tại nhà cái Cfun68

Cfun68 là một nhà cái có nhiều games đổi thưởng hấp dẫn nhất thị trường hiện tại. Với sự phát triển của mình càng ngày càng có nhiều người gia nhập cũng như tận hưởng các trò chơi mà nhà cái mang lại. Trong đó Roulette là một sản phẩm giải trí không thể thiếu và thường xuyên có mặt ở nhiều casino nổi tiếng trên thế giới. Đối với những người mê Roulette có thể đến ngay Cfun68 và tận hưởng cách chơi hấp dẫn tại nơi này.

Tổng quan về Roultette

Roulette là sản phẩm giải trí hấp dẫn được Cfun68 đưa ra thị trường nhằm tăng sự trải nghiệm của người chơi. Với cách chơi đơn giản cùng bàn cược có sẵn, người chơi có thể dễ dàng lựa chọn cửa cược cho chính mình. Đây cũng là games đổi thưởng với tỷ lệ tiền thưởng cực kỳ hấp dẫn tại nhà cái.

Các loại Roulette tại Cfun68

Tại nhà cái đang có hai hình thức Roulette hấp dẫn được người chơi ưa thích là Roulette Mỹ và Roulette châu Âu. Tuy rằng hai hình thức này giống nhau khá là nhiều nhưng vẫn có những đặc điểm khác nhau để người chơi lựa chọn như sau.

Đối với hình thức Roulette châu Âu trên bàn cược chỉ có 1 ô 0 còn đối với Roulette Mỹ sẽ có 1 ô 0 và 1 ô 00.

Trong Roulette châu Âu có 37 ô số để bạn đặt cược và tỉ lệ trả thưởng là 1 ăn 35. Còn đối với Roulette Mỹ có 38 ô số với tỷ lệ cược cũng 1 ăn 35.

Tỷ lệ thắng của Roulette châu Âu sẽ có phần nhỉnh hơn của Roulette Mỹ. Do đó khi bạn chơi hình thức Roulette châu Âu sẽ mang lại lợi thế nhiều hơn cho mình.

Hướng dẫn chơi Roulette khi đến nhà cái

Nhà cái Roulette có luật chơi cụ thể khi chơi games đổi thưởng Roulette mà người chơi cần nắm rõ. Trong luật chơi sẽ có những điều chỉnh để phù hợp hơn với quá trình cá cược.

Thuật ngữ trong trò chơi

Mỗi hình thức cược trong quá trình chơi sẽ có những thuật ngữ cùng với đó là ký hiệu mà người chơi cần phải nhớ. Những thuật ngữ cơ bản nhất cần biết như sau.

Bottom Track: Vị trí của bóng ở giữa rãnh bóng và số.

Black Bet: Người chơi cược vào các ô màu đen.

Column Bet: Người chơi cược 12 số thẳng hàng.

Croupier: Chỉ người quay vòng Roulette.

Corner Bet: Người chơi cược 4 số với nhau.

Dozen Bet: Người chơi cược 12 số bất kỳ. En Prison Rule: Trường hợp bóng về ô số 0 bạn có thể giữ tiền cược và tiến hành vòng chơi mới cho mình.

Luật chơi cơ bản cần biết

Trong quá trình chơi games đổi thưởng ở Cfun68, mỗi sản phẩm đều có luật chơi để bạn chấp hành và đặt cược. Trong đó Roulette có luật cơ bản như sau.

Người chơi có thể lựa chọn chơi bàn cược Roulette châu Âu hoặc Roulette Mỹ theo sở thích của bản thân mình.

Trong quá trình chơi Roulette bạn có thể đặt cược một hoặc nhiều cửa cược khác nhau để tăng tỷ lệ chiến thắng.

Trong Roulette sẽ có bàn cược để người chơi đặt cược, bạn chỉ cần đưa chip cược theo quy định của nhà cái. Ngoài ra bạn có thể cược ở những nhóm số, màu, hàng dọc, ngang trên bàn cược.

Mỗi kiểu chơi tùy vào xác suất trúng thưởng mà sẽ có tỷ lệ trả thưởng khác biệt.

Trong trò chơi có giới hạn cược tối và tối thiểu ở mỗi phòng cược Roulette mà người lựa chọn.

Các kèo cược có thể trải nghiệm tại Cfun68

Có rất nhiều kèo cược Roulette đa dạng và hấp dẫn để người chơi lựa chọn. Theo đó trong quá trình chơi bạn có thể lựa chọn những cách chơi ở nhà cái Cfun68 như sau.

Đặt cược đơn là khi bạn chỉ cược 1 số duy nhất giúp cầu may. Trong đó sẽ có từ ô 0 đến 36 để người chơi chọn lựa với tỷ lệ là 1 ăn 35.

Cược đôi: Người chơi cược vào 2 số bằng cách dịch chuyển chip cược về vách ngăn giữa hai ô số trên bàn cược với tỷ lệ trả thưởng là 1 ăn 17.

Cược hàng: Trong bàn cược có từng hàng với 3 số khác biệt. Bạn chỉ cần đặt cược hàng mình muốn với tỷ lệ trả thưởng là 1 ăn 11.

Cược 4 số: Bạn chọn cược 4 số với vách ngăn trung tâm. Kiểu cược này có tỷ lệ là 1 ăn 8.

Cược 6 số: Người chơi đặt cược ở hai hàng 3 số ngay liền kết nhau. Tỷ lệ trả thưởng là 1 ăn 4.

Cược cột: Trong bảng Roulette có 1 cột 12 số và người chơi cược chip vào chỗ quy định. Tỷ lệ trả thưởng là 1 ăn 2.

Cược nhóm 12 số 1st, 2st, 3st: Đây là những nhóm số cụ thể để người chơi đặt cược. Tỷ lệ cũng là 1 ăn 2.

Cược đỏ - đen: Trong bàn Roulette có 1 nửa là ô màu đỏ và 1 nửa là ô màu đen. Người chơi cược một trong hai màu với tỷ lệ trả thưởng là 1 ăn 1.

Cược chẵn - lẻ: Tương tự với cược chẵn lẻ, bạn sẽ cược xem bóng sẽ vào ô số chẵn hoặc số lẻ.

Cược nửa bàn: Từ 1 đến 18 là nửa bàn dưới và từ 19 đến 36 là nửa bàn trên. Người chơi cược 1 trong 2 nửa bàn khi chơi Roulette.

Kết luận

Bài viết trên đã hướng dẫn đầy đủ cách chơi cũng như quy tắc cần nhớ trong quá trình trải nghiệm Roulette tại nhà cái. Người chơi tham gia Roulette hoàn toàn có thể dùng thủ thuật và kinh nghiệm giúp bạn thắng cược thêm nhiều tiền thưởng. Đây cũng là một trong những trò chơi được nhiều người lựa chọn trong suốt quá trình chơi games đổi thưởng tại Cfun68.

[bvlcorr]

A Mine Loco for the BVLC - Part 1

But wait, I hear you say, the BVLC doesn't have a mine on it.  It's a logging railroad.  Yes, it is, but I decided to add a bit of operational interest to it.  Namely, there's no 'through traffic' on the layout.  My trains originate at Camp A, then go to either Camps B or C (in staging) or Camp D (on the other side of the layout).  As such, I've decided to expand the backstory of the BVLC slightly, as follows.

In 1946, the Pebble River Mining Company discovered copper ore further up the Bradford Valley, just beyond the location of Camp C of the Bradford Valley Lumber Company.  They struck a claim, then made a deal with the BVLC.  Namely, the BVLC would allow the PRMC to build tracks from the termination at Camp C to their mine, and allow trackage rights down to Camp A.  In exchange, PRMC would have to pay the BVLC a share of the profits.

On the layout, this will be represented by a train owned by the PRMC, which comes out of staging, leaves some hoppers on the interchange track, then returns to staging.  For this, I'll need one locomotive, one caboose and some other rolling stock.  I've ordered kits for three hoppers, a boxcar and a flatcar.  As for the locomotive and caboose, I'll be scratchbuilding those.

My starting point for both the locomotive and the caboose was a Bachmann HO scale 2-6-2 Prairie.  I'd had one of these on my first layout, a 'spaghetti bowl' I'd built back in high school.  It was one of the smoothest running engines I'd had back then.  As such, I'd purchased one about six months ago with a view to converting it into an On30 locomotive.

I started by removing the locomotive's body shell, and found that this version was already DCC-friendly.  All I had to do was remove the board and smoke unit at the front of the boiler, and the motor was isolated from the chassis.

My first step was to cut a rectangle of 1.5mm styrene, 7.5 scale feet wide.  This would become the footplate of the new engine.  I then cut a gap in the middle, to allow it to fit over the chassis.  This was immediately followed by the discovery that part of the running gear stuck up above the bottom of the footplate.  In order to accommodate this, I drilled holes at the appropriate spots.

My next step was to cut two short sections of 3.2mm square styrene strip, and glue them together.  Once the glue had dried, I filed them down so that they fit into the slot at the front of the chassis, where the smoke unit used to be.  I then glued this in place, ensuring that it was centred.

To secure the other end, I again used 3.2mm square styrene strip.  This time I used a single piece, glued vertically.  This reaches the hole in the chassis used to mount the original body shell.  After this glue had dried, I drilled a hole in the bottom to accommodate the original screw.

With that done, I used another two pieces of 1.5mm styrene to build the lowered cab floor.  This will be a tank engine, so I made the floor long enough to accommodate a cab and a small fuel bunker at the rear.  I had a cab left over from my conversion of an On30 2-6-0 into a 2-6-2ST, and decided to use it.  This particular cab casting has a wall across the rear, at the end of the side walls.  I was able to cut this wall off, and re-attach it to the rear of the cab roof.  This opened up the cab itself, and left a gap for the side doors.  I also filed the rear opening slightly, to accommodate the speaker that will be mounted in the bunker.  This will be facing forward, playing the sound out through the side windows.

In order to locate the cab on the footplate, I drilled two 0.5mm holes in the corners of the cab walls.  I then glued some 0.5mm copper wire in them to act as mounting pegs, and corresponding holes in the footplate.  I also glued some square brass tubing along the underside of the footplate, to reinforce the plastic.

While the cab was drying, I tested the coupler height at the rear of the locomotive.  It was a little high, so I added a strip of the 3.2mm square styrene, and made a coupler mount out of the same material.  With this in place, the coupler height was correct.

I continued the brass tubing along the underside of the footplate.  The cab steps were formed out of 0.8mm copper wire, and soldered into holes drilled in the brass tubing.  Once these sections had cooled down, they were glued in place.  I've tried using cyanoacrylate adhesive on copper wire-to-metal joints before, and in my experience it usually doesn't work too well.

With that done, I turned my attention back to the cab.  I extended the rear wall down with styrene, and used some 2x1mm styrene strip as trim.  I then used 1mm styrene to build an oil fuel tank on the rear of the cab, with a hatch from another project that didn't work out.  Unlike the BVLC engines, this loco will be an oil burner, for two reasons.  In terms of the backstory, this is an engine working around a mine, which has explosives stored on site.  As such, engines that emit sparks such as coal or wood burners, would be a safety hazard.  I also wanted to differentiate it from the BVLC locomotives, all of which are wood burners with diamond stacks.

My next step was to sort out the pilot.  I started by cutting off the HO scale pilot, leaving only the section sloping up from the underside of the chassis.  After cutting a section of 3.2mm square styrene to length, I filed it down to the same angle as the slope and glued it in place.

The pilot itself was originally from a Backwoods Miniatures conversion kit for the Bachmann HO scale 0-6-0.  The rest of that kit ended up as my saddle-tank-and-tender engine, BVLC no. 9.  Once I'd glued the pilot in place, I checked the coupler height.  Fortunately, it was correct the first time.

I used 3cm diameter PVC pipe for the boiler, cut so that it would sit flat on the footplate.  Two slots were cut in the sides, in order to allow the cab to fit over the boiler.

To form the number board for the smokebox door, I started by gluing a nail to a washer, then the washer to some 0.5mm styrene.  Once this was dry, I cut it out, making several cuts to get it as close to a circle as I could.  I then held the washer end against a large file, and twisted the nail between my fingers.  After a few moments, this produced a circular number board.

I built up the smokebox door from discs of styrene, with styrene strips and copper wire for the door hinge.  The nail from the number board was trimmed to length, then mounted in a hole drilled through the middle of the smokebox door.  I then put in the front and side walls for the side tanks.  The side walls are flush with the cab, and so no rear wall is needed.

While those were drying, I built the rear pilot.  After gluing two strips of 3.2x1mm styrene in an 'L' shape, I cut four sections of 1x1.5mm styrene.  Once those were glued in place, I put the L-shaped section on the bottom.

To finish off the water tanks, I added a top made from 1mm styrene along each side.  I then cut two sections of 0.5mm styrene.  These matched the curve of the boiler and went at the front, to complete the front wall.  Once these were dry, I used some 0.25x2mm styrene strip to make the boiler bands.  I also filled in the gap at the front of the cab, trimming it short enough to clear the mechanism but long enough to finish below a slot cut in the top of the boiler.  

With that done, I started on the firebox.  I glued some 0.5mm styrene to the rear of the pipe.  After it had dried, I used a hobby knife to cut around the top half, following the curve of the pipe.  I then cut straight down for the bottom half and used a file to tidy up the shape.  The firebox was then wrapped with some 0.25mm styrene to create the correct shape.

Now that the main body was completed, I turned my attention to the details.  I was able to obtain most of them from my shoebox of failed projects, but I didn't have a whistle casting to hand.  What I did have, though, was some brass rod of a suitable size, and some slightly larger brass tubing which just fitted over it.  After cutting the tubing to length, I glued it in place.  I then used a hacksaw to cut a small slot in the front of the whistle, and filed the top smooth.  For the valve handle I used 0.8mm copper wire, soldered into a hole drilled at the back of the whistle.  When the whistle had cooled down, I glued it in place atop the rear dome.

I made the cab doors out of 1mm styrene, cut to fit just behind the cab walls at the front and the trim at the rear.

In order to hide the bottom of the motor, I cut two 'firebox sides' from 1.5mm styrene.  I test-fit them before gluing, to ensure they would clear the rear driving wheels.

I made the water hatches using the same method as the numberboard, but with two washers instead of one.  I used 0.5mm copper wire to form the handles on top.

After adding some handrails, grab irons and other details, I test-fit the body on the chassis.  The headlight was one of the spare ones included with the Bachmann 2-4-4-2.  There were a few spots where body putty was needed, and I applied it before priming the model.  Now, all I had to do was wait for the DCC decoder to arrive.

In my next post, I'll outline how I built a caboose for the other end of the mine train.

[fabiomanoel1977]

ZAFINA #14 - PARTIDAS ONLINE TEKKEN 7 Ranked Matches 1080p  60fps sexy Mod Gameplay Semi Nude ryona

Português: Partidas Online com a Zafina. Me diverti muito, queria jogar mais, mas joguei hoje 4 horas direto e minha tendinite tá doendo muito... Vou precisar descansar um pouco... Embaixo está a lista de adversários que enfrentei nesse vídeo: Total de 7 Partidas Online.

English: Online matches with Zafina. I had a lot of fun, I wanted to play more, but I played 4 hours straight today and my tendonitis is hurting a lot ... I'll need to rest a little ... Below is the list of opponents I faced in this video: Total of 7 Online Matches.

Eu mesmo (Myself) 0- FabioManoel1977  - 1st dan 0V [BP] - Zafina VS 1- Whit - 1st dan 0V [EN] -Yoshimitsu 2- Kan-CHO!  Tekken God Prime 1575V [EN] - Geese Howard 3- Brviolent   2st dan  11V [EN] - Geese Howard 4- Xis  Initiate 326V [BP] - Fahkumram 5- Whit  1st dan 0V [EN] - Bob 6- Brviolent   2st dan  9V [EN] - Lucky Chloe 7- Xis  3st dan 326V [BP] - Fahkumram

#Tekken7 #Zafina #زافينا #Zafina #Tekken7 #Tekken #Gameplay #Bikini #ryona #Sexy #ECCHI #MOD  #egyptian #DANCER  #physics #BELLYDANCER #Bikini  #Ecchi #boobs #Semi #Nude #SemiNude  #MOD #Jiggle #physics #BELLYDANCER #DANCER #鉄拳 #鉄拳7 #زافينا

[franjohfty288]

Schlüssel zum Erfolg gefunden - Mundpflegecenter - 2020

Für einige Mundduschen können auch Aufsätze zur Zungenreinigung oder für Nasenspülungen ergänzend erworben werden. „Comparison of irrigation to floss as an adjunct to tooth brushing: Effect on bleeding, gingivitis, and supragingival plaque. Neben den elektrisch betriebenen Geräten sind auch einfache Modelle erhältlich, die auf den Wasserhahn aufgesetzt werden und keine Energieversorgung benötigen. Es liegt also ganz allein daran, was man selbst persönlich bevorzugt, denn alkoholhaltige Mundwasser fühlen sich meist etwas erfrischender an. Auch was Mundduschen betrifft macht der alkoholgehalt keinen erwähnenswerten Unterschied. Jedoch ist das Gerät nur für Menschen empfehlenswert, deren Zahnzwischenräume nicht allzu eng oder zu weit sind. Munddusche mit großem Anwendungsbereich. Jetzt bei MediaMarkt Angebote vergleichen & bestellen! Die Rückseite ist leicht gummiert und dadurch liegt die Munddusche sicher in der Hand. Phelps-Sandall und Oxford studierten eine Gruppe von 21 Patienten, von denen sieben allein die Munddusche anwenden durften, die anderen benutzten entweder Sulkus-Reinigungsbürsten oder spülten mit PERIO-AID (DENTAID GmbH, Mannheim).

Schlauch ür Braun / Braun Oral-B (Oral B) Mundduschen und Dentalcenter. OTTO akzeptiert Nachnahme, Rechnungskauf und Teilzahlung. Angenehm starker Sprühdruck, jedoch eher kleiner Tank, der ein Nachfüllen während der Zahnzwischenraumreinigung notwendig machen kann. Wasserdruck: Für eine ausreichende Säuberung der Zahnzwischenräume ist ein entsprechend hoher Wasserdruck erforderlich. „Comparison of irrigation to floss as an adjunct to tooth brushing: Effect on bleeding, gingivitis, and supragingival plaque. Nach einer 4-wöchigen Testphase mit der zur Verfügung gestellten Waterpik® Munddusche war ein deutlicher Rückgang der Schwellung erkennbar und auch die Indexwerte hatten sich etwas verbessert (API: 29,16%, SBI: 54,16 BOP: 0).

Ganz links finden Sie eventuelle Auszeichnungen, wie unseren Testsieger Award oder den Preis-Leistungs-Testsieger Award. Hier können sich Bakterien dann oft ungestört ansiedeln und vermehren, was schließlich zu einem erhöhten Kariesrisiko und Zahnfleischentzündungen führen kann. Es reicht jedoch nicht aus, die Zähne zu putzen, sondern auch die Zahnzwischenräume müssen sorgfältig gereinigt werden. Die Waterpik WP 450 Munddusche kommt außerdem mit einem praktischen Etui zum Aufbewahren auf Reisen und mit 4 Aufsätzen für die Reinigung von Zahnzwischenräumen, Zunge usw.

Airfloss Alternative

Munddusche Zahnseide

Munddusche Panasonic Ew1211

Munddusche Testsieger Warentest

Dauerbetrieb  Abnehmbarer Wassertank für besonders leichte und hygienisch saubere Reinigung der Munddusche  Gewicht: 210 g  Inhalt: 1x Munddusche EW-D10, 2x Batterien, 1x Düse EW0955. Dann noch einmal kochendes Wasser drüber.. Was kann diese schwarze Munddusche? Hier https://en.wikipedia.org/wiki/File:Sonic_toothbrush.jpg sollte eventuell auf einen Einsatz der Munddusche verzichtet werden, denn der Wasserstrahl könnte noch mehr Verletzungen hervorrufen, indem er durch den Druck Erreger aus den entzündlichen Stellen in die Zahnfleischtaschen spült, welches wiederum gespült werden. Welche Munddusche kaufen - Munddusche dm und Munddusche Rossmann oder doch etwas anderes?

MD 16. OC 15.525a. Muss die Munddusche mit einem Verlängerungskabel an einem anderen Einsatzort angeschlossen werden. Aber nicht nur mit Blick auf die gefürchtete Gingivitis spielt der Einsatz einer Munddusche eine sehr wichtige Rolle, sondern mit diesem Gerät kann man noch viel mehr erreichen, wenn es um die Pflege und Reinigung des Zahnfleisches geht. Kann eine Munddusche die tägliche Zahnhygiene zusätzlich verbessern oder ist eine Zahnbürste ausreichend? Wird eine Munddusche durch mehrere Personen genutzt, empfiehlt es sich, für jeden Nutzer eine eigene Düse zu bestellen. Selbst im Vergleich zu den Subjekten, die neben einer Zahnbürste Zahnseide benutzten, wurden trotzdem 3-mal so gut gereinigt- Klares Plus für die Waterpik Munddusche. Mit einer Munddusche sind gesundheits- und hygienebewusste Verbraucher in jedem Fall gut beraten, denn ein solches Gerät vermag nachhaltig dazu beizutragen, die Gesundheit im Mund sowie auch die Zahnhygiene zu verbessern. So steigt die Nutzungsdauer auf zwei Minuten pro Tankfüllung.

April 14, 2017. Kann die Munddusche als Zahnzwischenraumreiniger angewendet werden oder liegen die Vorteile der Munddusche eher woanders? Im Prinzip verfügt jede Munddusche über einen Wassertank, aus dem eine kleine Pumpe das Wasser durch eine Düse drückt. Die Munddusche bei Die regelmäßige Zahn- des weiteren Mundraumpflege gehört untrennbar zum Alltag.

Lidl Oral B

Oral B Günstig

Mit der Munddusche wird Ihre Zahnreinigung gründlicher und der Mundraum hygienischer, womit auch dem Mundgeruch der Kampf angesagt wird. Aber auch Massage-Programme zur Pflege des Zahnfleisch werden geboten. -zahnbürste.de/munddusche. Fakt ist, dass es heute sogar Mundduschen gibt, die über einen doppelten Tank verfügen: In den einen Teil des Tanks füllt man das Wasser ein, in den anderen Bereich zieht das Gerät zumeist „in Eigenregie Luft ein, um den Reinigungseffekt zu verstärken. Jetzt Aktuelle TOP Modelle 2018 von Braun, Waterpik, Philips und Panasonic - Zum aktuellen.. Laut Jahn wurden Mundduschen bereits 1962 auf dem US-amerikanischen Markt eingeführt 13. Es konnten sich Geräte mit elektrischer Pumpe und abnehmbarem Tank durchsetzen. 2 Düsen und Ladestation mit Düsenhalterung. Wer auf der Suche nach einer neuen Zahnbürste ist, sollte bestenfalls gleich ein Dentalcenter kaufen - Zähne, Zahnfleisch und Zahnarzt werden es ihm danken. Waterpik Aufsteck-Düsen standard JT-100 PZN: 6705931Inhalt: 2St- Zubehör für die Waterpik Munddusche...

Eine Munddusche ist ein praktisches Gerät zur Zahnpflege, das es erlaubt, auch die Zwischenräume zwischen den einzelnen Zähnen gründlich zu reinigen. Dadurch ist nicht bei jeder Inbetriebnahme der Dusche ein Auffüllen erforderlich. Mehrfachstrahlen mit pulsierenden Effekten arbeiten deutlich effizienter und somit auch gründlicher. Zu den positiven Eigenschaften einer Munddusche zählen: Bei dem Test achtet man auf die Handhabung, auf den Tank, auf die Qualität, auf den Preis und mehr. Mundduschen mit integrierten Wassertanks herhalten zigeunern besonders gut für Reisen. Wasservorrat und der Akku sind begrenzt. Die Preise für Fluidenta Munddusche in unserer Internetapotheke sind freibleibend.

Ob Mohnstreusel oder Petersilie, eine Munddusche aus unserem Testbericht ist das perfekte Hilfsmittel, um auch zwischendurch für die perfekte Hygiene sorgen zu können, wenn man sich vielleicht nicht nach jedem Essen die Zähne putzen möchte. Grundpreis:89.5 / 1 St Produkte > Körperpflege > Mund- und Zahnpflege > Munddusche. Gebrauchsanleitung für das PHILIPS HX8211/02 Sonicare AirFloss Munddusche Weiß. Sie werden mit einem Akku betrieben. Das Design des Kartons, in dem die Waterpik Ultra Water Flosser WP-100 Munddusche geliefert wurde, ist sehr stilvoll und entspricht hohen Ansprüchen. Sie dient zur gründlichen Reinigung zwischen den Zahnzwischenräumen. Dieser Strahl entfernt Speiserückstände und Plaque, wobei das Zahnfleisch sanft massiert wird. Коллекция классных шрифтов, букв, символов и тегов, относящихся к Mundduschen Ники для копирования, репутация, популярность Создавайте имена для Youtube, Instagram или юзернеймы для Facebook с легкостью.

Einen ausgiebigen Munddusche Test mit Munddusche Testsieger findest du bei uns nicht, da wir den Munddusche Preisvergleich favorisieren. Die meisten Modelle bieten daher vielseitige Funktionen an, die sich positiv auf den Nutzen auswirken. Ist die wirklich so gut? Mit der Ladestation sei die Panasonic auch schnell im Badezimmerschrank oder auf Reisen im Koffer verstaut, lobt ein Kunde auf Für die erste Benutzung muss man den Akku der Munddusche für volle 15 Stunden laden lassen, bevor sie benutzt werden kann. Sie werden besonders von Menschen mit Zahnbrücken bevorzugt.

[rodwey2004]

Going Loco: Kerr Stuart Work No. 1048 of 1908 vintage, 0-4-2ST Brazil Class No. 2 ‘Excelsor’ ⏮SWIPE⏭ Also see @rodweyportraits . . Visit my website rodweyphotography.com . . #locomotive #train #whipsnadezoo #vintage #steamlocomotive #railway #kerrstuartcompany #whipsnadelocomotive #architecture #canonphotography #global_capture #themetro #canon_photos #picoftheday #meetthemoments . . 📸: @rodweyportraits @rodwey2004 . . @beautifuldestinations @metro.co.uk @zslwhipsnadezoo @steam_locomotive_nostalgia @steam_trains_and_more (at ZSL Whipsnade Zoo) https://www.instagram.com/p/B9lYxlPghoS/?igshid=2f73vtvyatqv

[airmanisr]

Vulcan Foundry - Steam Locomotives Catalogue by Historical Railway Images Via Flickr: India Railways - Oudh and Rohilkhand Railway 0-4-2ST steam crane locomotive

[slag0000]

DISASTERの2ndアルバム。ここでようやく演奏やら楽曲やらアートワークやら、いろいろなものがコンセプトにかっちりハマった感じでしょうか。このアルバムのリリース時点まででは一番良い出来なのは間違いないですね。良い経験でした。 1st同様、以下のリンクとバンドのライブでまだ購入可能、なはずです。 http://rockstakk.shop-pro.jp/?pid=132667215 https://www.metalpesado.com/mailorder/shop.cgi?order=&class=all&keyword=disaster&FF=0&price_sort=&pic_only=&mode=p_wide&id=56403&superkey=1 https://diskunion.net/portal/ct/detail/HMHR180620-201 ●DISASTER - Coppertone (2018) 2st Album 1. 俺たちDisaster 2. Craked Me Up 3. Summer Of Thrash 4. Dedicate A Song To You 5. Naughty Girl 6. Thrapy Is B.A.L.D 7. Keep It Real 8. Megalomania 9. Thrashin’ 2018 10. パイAttack release date: June 20th, 2018 release style: CD performance: Junpei Kinoshita(vo, g), Naoyasu Takahashi(b),Naoyuki Tomizawa(vo, dr) recorded at Noise Room Recording Studio recorded, mastered: Shigenori Kobayashi artwork: ??? © 2018 DISASTER

[chief-cooker]

Air cheese cake with chocolate

http://chief-cooker.tumblr.com

A delicious experiment :) Dark chocolate nice shades tender taste of cottage cheese layer

Ingredients and preparation:

Shape, large, so many products... In centimeters will not say exactly, it seems 28, it is necessary to clarify:) Taks... In this case I had 320g wheat and 160 oatmeal cookies = 480g smallive into fine crumbs

Melt 240g oil drain and mix with crumbs, put into the form and distribute it using a spoon or fingers:)

200g bitter (how bitter, to solve already to you) chocolate break into small pieces, add 4st l 10%-x cream and melt in the microwave or in a water bath

Stir until smooth and add another 3 tablespoons of the same cream, stir again, pour onto the base of biscuit and level

Put this thing for half an hour in the fridge, or I put you first for 15 minutes in the freezer, so clutched, then shifted into a cooling chamber while preparing cheesecake layer. For it will take 2,5-3 packs of 200g cottage cheese 0% fat, total 500-600g, add 2st l of sugar on each pack, total of 5-6 tablespoons and 4 tablespoons of 10% cream, total 10-12 article L. and whisk until smooth mass

At this time, we soaked in 2.5 tbsp gelatin in ½ -2/3 C water and continue to make cheese layer. 500ml cream for whipping 35% starting beat on low speed, add 2-3 tbsp sugar and whisk until kavalerskogo state

We shift the cream to the curd mass added by request 1-2st l of liquor, a little vanilla and whisk all together. Swollen gelatin heated (I put in the microwave), the main thing is not overheating, to dissolve and enter into cottage cheese, continuing to whisk. Beat for another couple of minutes, so that all components are mixed

Pour on the base and put in refrigerator at least 3 hours (I, again, placed first in the freezer for 20 minutes, then moved to the fridge), and better at night. Get hold of a narrow thin knife along the walls of the mould and carefully remove it. Cut and served with tea.

[orange1896]

HC114 ALTERNATOR 4110003492219 JFWZ29C1 JFZ235-0500 DH297 YUNNEI

HC114 ALTERNATOR 4110003492219 JFWZ29C1 JFZ235-0500 DH297 YUNNEI

253000360 XCMG 902-1469.1配重支撑焊接 801937970 XCMG 500KGH.23.1液压测压管路 200200380 XCMG TY(CQ).902-21-201钢板1 705258508 XCMG RP403.1.1.5-7托板 242100593 XCMG EDV60D1.07.3.1右前板（灰） 705204921 XCMG Z5G.733-37.3-2筋板 GBA0462 705247344 XCMG 500K.030-181.4.1-3筋板 "WHATSAPP/WECHAT:0086-1525 4934 126 Email:sales@meppon.com" 402208545 XCMG Z5G.654-2-203立板 253100119 XCMG WA1210.731-16-3钻套 5002280 228300953 XCMG 902-871A防切屑飞溅挡板 "WHATSAPP/WECHAT:0086-1525 4934 126 Email:sales@meppon.com" 253404983 XCMG 300KVWJ.4.4-1左后护栏 Y00060037 228700277 XCMG 800KII.30.1-5.1＊中铰接板法兰合件 Z00200059 252600850 XCMG XS202Ⅶ.030-01柴油机座对焊工装 860104126 XCMG GB/T70.1-2008螺钉M8×50(达克罗) 440600133 XCMG LQC240A.07II.7.6转板 805048485 XCMG LW160KV.1.1.4燃��管 276101208 XCMG WZ30-25.030-14摇臂座梁点焊工装 269800448 XCMG DL900A.6.9-3护板II 209900146 XCMG XC870HK.14.3.2-16筋板 276609814 XCMG JDS30Ⅱ-2000离合器摩擦片 Z00250353 705224985 XCMG XS202J.11.1.1.1-2矩形管 "WHATSAPP/WECHAT:0086-1525 4934 126 Email:sales@meppon.com" 404203156 XCMG GB/T899-1988螺柱AM10-M10×1×40 253501487 XCMG 2ST-13-A1/A1-1000胶管（作废，用803165319） 9103343E 276607186 XCMG N902-838-7键2 803131231 XCMG XT870.14.4.1销轴 "WHATSAPP/WECHAT:0086-1525 4934 126 Email:sales@meppon.com" 705202599 XCMG XGH100.87.1-19后内立板 Y00140002 201000594 XCMG HZS120T.1.5.1中间挡架一 860109845 XCMG DL210KV.6.1-GY1机罩贴板 502000057 705229160 XCMG KH6010.2销轴 253201332 XCMG 902-904-1销 859930761 XCMG XC760K.13-6隔套 252118434 XCMG 300KN.43.3-1限位块 7S0174 252610546 XCMG XAP320.19.2.1.4.1A料门框架2 410402558 XCMG F481CACF101005-702软管总成 705246858 XCMG XT550K.10A.1.1.2.3右B柱外板总成 413500144 XCMG 902-1240.1支架 705205146 XCMG LW180KVII.10.1.1驾驶室焊接总成 800787400 XCMG 直流电流表600A（松下焊机） 276102809 XCMG 75ET.1.6.1.1-1弯板 252611698 XCMG 9W2678销子 201310949 XCMG GB/T882-2008销14×28 9364819 253502493 XCMG Z5G.21.2A-1筋板 34570 201304671 XCMG 1200动臂用结构件备件包装辅料包 253700145 XCMG XD111零件目录(备件)（删除） 9507996 225700102 XCMG 500F.741-3-1螺杆 276208240 XCMG 679-91.1-17连接板 402205602 XCMG 600KIX.30.1-15(L)斗内加强筋 3003146 860112732 XCMG 902-1367.1-5角钢40 201302129 XCMG LQC320A.15振动筛接线盒装配 30022092 252300131 XCMG XC760K.8.1.4-3右内侧板 820300398 XCMG ISDe28530发动机 269800787 XCMG LW180KVB.5.1-3筋板 301020309 705113678 XCMG XC938.30A.1.2右侧板总成 705209589 XCMG TWZ180.08III.14.3.1-1侧板Ⅰ 705236161 XCMG G369.555-1垫板 08N420 226100126 XCMG 812/9-9/43.5/PAG/7ZL/74.8/5×6.8/BC90/风扇 705250385 XCMG YL20.5.1.3-8薄板 9361854 803420373 XCMG 600K.4B.5II.1-2(L)封板 705112034 XCMG ET111.13.4.2-1支承板Ⅴ 276100577 XCMG 仪表箱线束XS120III(备件) 252117781 XCMG DL1200K.5.2-1支撑架 252806632 XCMG GI50GNV(RU)潍柴+行星箱+干式桥+两联先导+小高卸+冷启动+3.2斗 T0010036 860109894 XCMG EDV60D1.1.13-18调整垫片Ⅰ 705216573 XCMG M250SG.1Ⅲ.1.1-4基础中间保温棉 3A0005 803404778 XCMG 500F老机罩用备件包装辅料包 252913273 XCMG XC360.1.2排气尾管 860101807 XCMG EDV60D1.030-13-1定位轴 "WHATSAPP/WECHAT:0086-1525 4934 126 Email:sales@meppon.com" 252112669 XCMG LW188洛拖4105起动机QD277（一拖备件） 941100 803705033 XCMG DA35LOMDCF接头 109020167 201005147 XCMG DL350.1.1.1.1-3侧板 251900966 XCMG TWZ260.05.1-16加强板III 201000705 XCMG 液位计YWZ-400(备件) 252911820 XCMG Z5G.030-159.1-2矩形钢管60X60X1400 860114849 XCMG 500KV.10IV.1A驾驶室总成(工艺17) 276403365 XCMG A1023安全标志(风扇打手) 705245030 XCMG ZDBLKZF-II定变量控制阀 413403179 XCMG 300KV.30.1AXI斗侧板合件I 705101454 XCMG LW180KCQ.5-2销轴 252115851 XCMG 机油压力表0-6kg(备件) 226800357 XCMG YZC10D.6.2燃油系统 WJ04003215 860115220 XCMG 800K.731-2-2样板 801100090 XCMG 弹性联轴器01TMS200 276607618 XCMG WJ04.13.2.1-20封板 252903929 XCMG F481CECE282816-2000软管总成 402208410 XCMG 300KN(TD).1-4过渡接管 9503918 "WHATSAPP/WECHAT:0086-1525 4934 126 Email:sales@meppon.com" 803401153 XCMG XP262.05.12.1-7加油口座 253401718 XCMG XC760K.030-1.36.1下组件 803680245 XCMG X4PT01梯子 200201232 XCMG 948.10.5L-3安装板 401004930 XCMG 待用(备件） 705269228 XCMG 300KS.12.1.3.2右门上梁总成 276301331 XCMG LQC80B.3.4-3×1板 252900821 XCMG WA1210.741-1.8压板 859912038 XCMG 470-04-02113C板 A7-8770 400406531 XCMG XT860.2.1传动轴 252607554 XCMG 柴滤芯D638-002-50(上柴原厂) 801906656 XCMG 800K(LNG)VI.12.1.2.1-28横梁 Z00010198 860114666 XCMG XS202J.11.1.1.2C液压油箱 252900557 XCMG RP601.030-06-6托板（2） 9373167 253102643 XCMG TWZ260.06II.1-14贴板3 24C060 253700051 XCMG 600KVI.01.01支架 400703609 XCMG J6.4.1-13齿轮 860108548 XCMG 50GV(HC).6.1-9支板 276110202 XCMG ET110.15-3固定架 230500883 XCMG 800KII.30.1-13筋板 253300598 XCMG YL20.5.1-5接头 A6-4190 275102083 XCMG YZC10B.1.1前车架 252100825 XCMG 575.11.3左挡板 230500376 XCMG 500FNV.6II后车架系统 9358724 800902612 XCMG 3Y15A.6A转向系统     Read the full article