fastengineering - Tumblr blog

[fastengineering]

GASOLINE STATION SERVICE at fastengineers.in

We  always want to choose the best option for everything even if it’s the gasoline for your vehicle. Afterall, not all types of gases are the same or equal.

If you have been using the same type of gasoline for a while then you might be interested in switching it or you might be wondering about buying a new vehicle with a different grade of gasoline. If you are wondering this then you must first learn about the types of gasoline so you can choose the right gas for your car.

Gasoline, also spelled as gasolene, is a derivative product of crude oil, derived during fractional distillation process and has a translucent liquid form (as it is not used in crude form). It is used as fuel for internal-combustion engines, solvent for oils and fats  etc.

People usually wonder if gasoline and petroleum are one and the same thing or not. Then to clarify you, they basically are the same products - just with different names.  In the US and Latin countries, the term gasoline is used, but in Europe and Asian countries it's called petrol.

Here are the main types of gasoline station service/ petroleum storage:

Regular Gas - 87 Octane

One of the types of gasoline is the typical go-to-option, called as Regular gas - composed of 87 octane, with an average of 85 to 88. This type of gasoline is what many car manufacturers recommend to make your car run efficiently although it may not offer the best performance components higher octane gasoline options offer.  This type of gasoline is the least expensive and can help you achieve your goal without impacting your pockets.

Mid-Grade or Plus Gas - 89 Octane

Second type of gasoline is Mid-Grade or Plus 89 octane Gas which helps the vehicles that are designed to run on a higher octane gasoline. This octane level offers higher performance than the 87 octane, but doesn’t go as far as the 92 octane.

Premium Gas - 92 Octane

Yet another type of gasoline is Premium Gas -92 octane which are specifically used for high performance vehicles with engines that have high compression ratios or turbochargers

If you compare premium gas and regular gas, know that less than 20 percent of new cars require premium gas. In addition to sport or luxury vehicles being a few types of cars that perform better on premium gas, there are regular style cars that require this type as well, including the Fiat 500L and the Buick Regal.

For more information about: Fastengineers and  Fabricators service Please visit at https://fastengineers.in/

[fastengineering]

WELDING AND FABRICATION at fastengineers.in

Have you ever thought about how the welding industry impacts the world around us? Well, even I had never thought about it until my friend told me about her father's Welding business.

Thinking about it, welding is an essential component of many industries such as the automotive industry, the construction industry, the aviation industry, and more. Without which so many things, including many buildings, gates, and fences, small kitchen appliances, vehicles - and even space travel - would not exist.

Welding and fabrication are important pillars of industry. Fabrication of metal refers to the building of metal structures which is done via a variety of processes such as cutting, bending, profiling, welding and assembling.

Metals that are used in the Fast Engineers Service, Engineering Solutions, Fabrication Service and fabrication process are steel, aluminium and other ferrous and non-ferrous metals. These metals are often procured by the fabricator in their raw form, which is then cut, bent and are formed into the required shapes and size ready for welding.

A large percentage of what you pay for is welding, including the work that goes into welding procedure creation as well as training/qualification of the welders performing the work. With such a large portion of your investment in a project going  for welding, - any  wrong decisions or steps can be very costly, sometimes leading to catastrophic failure, unplanned shutdowns or worse. Getting the welding right, from selection of a highly experienced fabricator to working with that contractor to identify the right processes, can save time, money and help you avoid serious production problems and for this Fast Engineering & Fabricators is there to help you. Selecting the best weld process for your project depends on the engineering, the design, the process, and the customer specifications for the best weld to use on each joint.

A huge part of mechanical engineering is fabrication and welding which allows the metal structures to be made into a range of desired shapes and sizes and can be applied to a variety of industries such as engineering, construction, marine and more.

The welding industry is not for everyone, because it is physically demanding and a very challenging job. However, it's a job that is essential to a wide variety of products and infrastructures, and one that plays an important role in various aspects of everyday life.

For more information about: Engineering Solutions Please visit at https://fastengineers.in

[fastengineering]

WHY CHOOSE FAST ENGINEERS & FABRICATORS?

You will find many manufacturers and service providers of Engineering and fabrication, So why must you choose Fast Engineers & Fabricators. Why must you give us a chance?

This is because of our USPs. Along with the best quality of product and  Metal Fabrication Service, Fabricators Service India, Metal Fabricators India that we offer, we focus more on the customer service, customer satisfaction and teamwork.

Normally it is said that for a brand’s success in retail, restaurant, and hospitality industries, the proper treatment of customers is essential as customers expect courteous interaction and fast solutions to their problems. But even after being in the manufacturing industry, we focus more on the production side of their operations, customer service

Reasons why customer service matters to us:

1. Customer Retention

Growing your customer base can be up to 25 times costlier than if you work on retaining your current one because with existing customers, one doesn't have to spend as much on marketing campaigns. Instead, you can focus on nurturing your relationship through quality customer service until they become repeat customers.

2. Word of mouth advertisement:

From a business point of view, if the customer is not satisfied with your service then he will share his bad experience with others. On the other hand, a satisfied client is more likely to recommend your business if they have positive customer experiences.

Rules that Fast Engineers & fabricators follow to provide best customer service:

1-Respond to Calls or Messages Quickly

Customers don’t want to wait too long on the phone or when making inquiries online. According to study, they’ll hang up on average after two minutes, and most of them won’t even bother calling again.

Hence reducing this wait time by quickly responding to the queries is an effective way to keep customers happy. You’ll also be able to cater to more customer inquiries since you can finish each interaction faster.

2-Collect Customer Feedback

During each interaction with clients, the customer service team can gather data from them, such as:

What are the most common product problems that clients encounter?

Are they mostly satisfied with the product?

What kind of improvements or upgrades do they want in future products?

Such information can help your team develop more streamlined responses instead of scrambling for answers during each call, email, or live chat. You’d then be able to address your clients’ needs much faster. You can also use the feedback to manufacture better products in the future and avoid such problems from occurring again.

We Fast Engineers & Fabricators focus on the above mentioned points along with providing the best-in-class engineering and fabrication services.

For more information about: Fabricators Service India Please visit at https://fastengineers.in

[fastengineering]

HOW TODAY’S FUEL STATIONS ARE DIFFERENT FROM YESTERDAY'S

Today’s fuel stations are surely different from the ones we have long ago. And tomorrow’s picture is even bigger in terms of fuel stations’ network, complexity with too many intersecting and correlating points that forms a big web. In today's world, going solo is not a very good idea which is why this type of environment involves participation of all kinds of different agents and parties such as Fuel and site owners, Lessees, Suppliers, Service providers, Haulers, Personnel and many more. So, to technically advance yourself-by  relying on data science will help you with Optimised processes, Reliable forecasts,  Automated replenishment, Collaborative exchange, and many more game changing perks,- all you need is Fat Engineers & Fabricators’ Petroleum storage tanks and their fast engineers Services.

Advancement and digitalisation is a necessity for your business to grow and become diverse which will not only empower you to react to the market’s volatility quickly, but will also help you anticipate trends and incidents in advance.

Increasing complexity

Tomorrow’s fuel stations will no longer be like today, i.e. just a place to fill up the vehicles. It has now become a multi-modal mobility hub with manifold product offerings such as Traditional fuels, Alt-fuels, E-charging and Flexible transport methods. Along with these major services, many additional services such as availability of Snacks, Drinks, Magazines, Prepaid cards, household articles and other items are provided. So you can say that petrol stations have also somehow become a place for you to sit and relax. It has become a social cum commercial place.

Mergers and acquisitions

In today’s dynamic environment Mergers and acquisitions are an inherent part of the service station market. M&A are important because of the constant change in regard to the size, structure and area of influence of the businesses, organisations etc.. All the businesses run with the ups and downs. In these fluctuating and changing situations - to keep the service and the cash flow uninterrupted, the newly acquired sites must be connected to the buyers’ software landscapes without delay.

If you want to reach heights in your business, then you have to keep pace with the changing environment. Fast Engineers & Fabricators helps keep pace with this fast moving and dynamic world. The services provided by us includes Petroleum storage tanks, fast engineers Service, Explosive licence for storage of diesel. You can contact us anytime  for any of these services.  Fast Engineers & Fabricators

For more information about: Explosive licence for storage of diesel Please visit at https://fastengineers.in

[fastengineering]

METAL AND STEEL FABRICATION

The word fabrication was initially used to talk about manufacturing or constructing. In layman's language it is something which is made up such as a Lie. For example - Telling your teacher that you forgot your assignment at home when in reality you have never made it.Nowadays, the word fabrication is usually used to refer to the act of coming up with a story out of thin air.

In terms of Engineering, Fabrication is the process of making something from semi-finished or raw materials rather than from ready-made components, i.e. the process of making something from scratch rather than assembling something.

Fast Engineers & Fabricators provide various best engineering services such as Steel Fabrication Service , fuels management Service, Pump Manifolds Service , Site Erections Service, metal fabrication etc.

METAL FABRICATION:

Metal fabrication is a somewhat broad term for several types of fabrication processes such as Cutting, punching, forming, shearing, stamping, welding are common fabrication techniques used to shape, cut, or mould raw metal material into a final product.

People usually get confused  between the terms fabrication and manufacturing. Fabrication and manufacturing are two totally different terminologies.So, will clarify with an example- , unlike material that is assembled from ready-made components or parts, fabrication can either produce end products or can produce parts for use in completing those products.

These two processes differ depending on the material and the desired end product. The process can be used in making mass-produced products or custom designs. Whether mass-produced or custom designed, the end products are made with a wide range of metals and their alloys—stainless steel, carbon steel, aluminium, copper, brass to name a few whereas In industrial fabrication processes, chances are one or more of the following methods will be used to finish or produce a part or end product:

STEEL FABRICATION:

Steel  has always been one of the most desired materials, and it has a plethora of different appliances. The toughness and other factors are the reason why steel components are used in pretty much anything, from transportation appliances to structures or entire buildings.

The nature of steel is an alloy of iron and other materials and the abundance of materials that can be added into the alloy creates a wide variety of steel types, with their own downsides and benefits.  Steel fabrication is the process of turning said steel into a specific shape – a process of transformation, for all intents and purposes. In other words, Structural steel fabrication involves cutting, bending and welding steel to make a structure. Unlike various types of welding in which steel alloy is repaired or strengthened, steel fabrication is when pieces of steel are put together to form different structures that are usually of predefined sizes and shapes.

If you are looking for any specialised service such as Steel Fabrication Service , fuels management Service, Pump Manifolds Service , Site Erections Service, then contact Fast Engineers & Fabricators.

For more information about: Pump Manifolds Service Please visit at https://fastengineers.in

[fastengineering]

GENERAL PRECAUTIONS TO TAKE WHILE HANDLING EXPLOSIVES

Explosive is any substance or device that can be made to produce a volume of rapidly expanding gas in an extremely brief period and are usually categorised in three categories: mechanical, nuclear, and chemical. A mechanical explosive basically is one that depends on a physical reaction, such as overloading a container with compressed air.   A nuclear explosive is one in which a sustained nuclear reaction can be made to take place with almost instant rapidity, releasing large amounts of energyBasically, chemical explosives are of two types: (1) detonating, or high, explosives and (2) deflagrating, or low, explosives.

But whichever type of explosive it is - it can release tremendous amounts of destructive energy rapidly and, if not handled properly, can pose a serious threat to the health and safety of laboratory personnel, emergency responders, building occupants, chemical waste handlers, and disposal companies. To use petroleum, diesel or gases - Explosive licence for storage of diesel, supply of cap assy fuel tank, Installation of Hi-Speed Diesel Storage is kind of a necessity

So, there are many types of precautions that need to be taken. But if we talk about the general precautions that one must at least take while handling and storing the explosives are :

It is important that explosive users track and dispose of substances before they become a problem. Proper inventory management systems can help mitigate risk to personnel and avert higher than normal disposal costs.

Identify all explosives and potentially explosives in your inventory and never store unlabeled chemicals. Do proper testing Before they can be shipped to a disposal site as unknown chemicals require special testing to determine which hazardous properties they possess.

Properly record the opening date and the date that the chemical should be discarded on the label of chemicals that may degrade to become potentially explosive.

One of the major precautions is to Keep explosive chemicals away from all ignition sources such as open flames, hot surfaces, spark sources, and direct sunlight as they are easy to catch fire

Making a designated area for the chemical use is considered preferable.

Consistent and Periodic check of the containers of chemicals that could become over-pressurized, like highly concentrated formic acid

Other than the above mentioned precautions, there are many other safety measures that should be followed properly. Fast Engineer & Fabricators is the best choice for Explosive licence for storage of diesel, supply of cap assy fuel tank, Installation of Hi-Speed Diesel Storage

For more information about:Explosive licence for storage of diesel Please visit at https://fastengineers.in

[fastengineering]

BENEFITS OF MANUFACTURING OF MANIFOLDS

What is your component manufacturing project? Or Are you trying to get into this. If yes, then you switch or move into the production of manifolds as it can  offer your company a large number of unique integration and design possibilities with the added value of being relatively inexpensive to create.

Metal, steel and plastic manifolds are basically designed to blend liquid, air or gaseous components, resulting in a condensed transportation system. Manifolds result in manufacturing of products such as tubing, piping, pumps, fittings and other connectors.

Majorly, fast engineers Service and Fabrication Service of manifolds are divided into two types and include single-piece design, and modular block design. A single-piece design is the type of manifold which is meant to support all necessary valves within a system, and is made up of all passages within the system, in one piece. On the other hand, there is modular-block design,which typically supports just one valve, its internal passages, and flow-through provisions.

Now the most important question that arises in mind is……WHY MANIFOLDS???

There are n number of reasons as to why should we go for manifolds, such as:

It reduces the risk of cross contamination of chemicals or gases by eliminating potential leaks in the component.

Lowers the cost of your end component by dramatically reducing the need for having the component serviced and the need for preventative maintenance.

The transportation system of manifolds are comparatively smaller, reducing the footprint of the component.

The use of manifolds reduces the carry-over volume of the utilised liquids that are transported.

The performance of the Manifolds are rather consistent, reducing the variables that can occur with other component processes.

The reduction in potential leak points ultimately ensures your complete system will be more reliable with manifolds.

Using the contract manufacturing services of manufacturers such as Fast Engineers and Fabricators,you can produce manifolds that lower the cost for many original equipment manufacturers.

Manifolds' designs provide direct, shorter transportation of liquids and gases.

If service is required, manifold design provides easy access for repairs.

With manifolds, part count is typically lower, making the functionality more reliable for a longer period of time.

Along with the above mentioned benefits there are many other factors that need to be taken into consideration while choosing to get into the manufacturing of manifolds.

Take the above mentioned benefits into consideration and do let us know if you are interested in the same or any other services such as fastengineers Service, Engineering Solutions, Fabrication Service.

For more information about:Engineering Solutions Please visit at https://fastengineers.in

[fastengineering]

HOW TO CHOOSE -STEEL WATER STORAGE TANKS

Why Buy a Welded Steel Water Storage Tank?

Welded steel tanks are the tanks that are used for a variety of strategic purposes based on the production and power needs of the communities being supported. Steel structures can be constructed in a variety of shapes depending on the work and imagination of the designer.These types of steel storage tanks satisfy the four basic criterias that includes low cost, reliability, versatility and availability.

While selecting a water storage tank, you need to look for something that fill the needs of a city or industry and  a comprehensive evaluation should be made of all the alternate designs available. There can be various points that can be taken into consideration while selecting Welded Steel Water Storage Tank

Cost

The factor to analyse is the COST. It includes analysing the points such as :

What is the total cost of ownership over the tanks expected service life?

Looking from the value engineering point of view, it shows that welded steel water storage tanks are the least costly alternative, even if you liberally assume that concrete tanks incur no maintenance expenses.

Reliability

When the reliability of this product is taken into consideration than the points of focus are

How reliable is the tank over the period of time it is expected to remain in service?

This question can be answered as when the construction and the testing is done properly, then it is considered as the most reliable type of tank. Also in these types of tanks there will be no internal deterioration or progressive degradation of the tank material and the ductility of steel provides a significant measure of safety against unexpected forces.

Versatility

Questions on versatility includes:

How can a tank be fabricated to create a unique visual impact that furthers the image of a community or corporation?

How can a tank be built to address unusual needs for storage operation?

Steel provided by Fast Engineers & Fabricators offers unmatched versatility in both form and function.

Availability

How available Fast Engineers & Fabricators’ welded steel water storage tanks are? It is a point of consideration because of the relatively large number of qualified vendors, welded steel water storage tanks can be constructed to meet your schedule requirements at competitive prices.

Along with the above mentioned service, Fastengineers and  Fabricators services also includes Peso Licence Consultant, Petroleum Storage, Petroleum storage tanks. To avail any of these specialised services - contact Fast Engineers & Fabricators

For more information about:Petroleum Storage Please visit at https://fastengineers.in

[fastengineering]

FIND YOUR STORAGE TANKS FOR OIL AND PETROLEUM

If you are into the storage of oil, petroleum and diesel then you must know the importance of storage tanks which serve as a staging area to collect crude oil in several stages of production and hold the oil until it is delivered to tankers or into a pipeline.

Petroleum and Oil storage tanks are available in various types, materials, shapes and sizes are used from the initial production of crude oil, to the refining and distribution of various petroleum oil products. Over the years, various types of oil storage tanks have been developed such as Floating Roof Tank, Fixed Roof Tank, Open Top Tank, Bunded Tank, made from various materials such as  plastic, reinforced concrete, stainless steel, carbon steel, or even carved on mostly impermeable rock salt deposits for underground oil storage

The tanks that are used to store chemicals are made in such a way by which there will be no reaction while storing the chemicals for a longer period of time. These tanks are commonly used for storing methanol, propane, fertilisers, sodium hydroxide, petroleum products, crude oil, liquefied natural gas, and other chemicals and also for some other purposes such as processing, static storage, mixing.

Fast Engineers & Fabricators service provides various types of industrial tanks that are provided by Industrial chemical storage tanks:

Industrial oil storage tanks:

Petroleum and  oil storage tanks used in industries are made of different materials, different from plastics etc. They are made from materials  like reinforced concrete, stainless steel, plastic and carbon steel and are used as reservoirs that store oil temporarily during the processing phase before consumption.

Industrial fuel storage tanks:

It usually involves two types of storage tanks in the market - underground storage tanks and above ground storage tanks. These tanks are for storing organic and non-organic liquids and are also used to hold vapour, fluids and other chemical liquids.

Industrial plastic storage tanks:

As they are made from plastic they are not heavy by nature and can easily be carried and installed wherever you want to place it. Just like any other plastic products, they are highly durable in nature. These types of tanks are commonly used for transportation and to assist in irrigation and fertilisation systems. These are also used to store oil and gases in the industries.

Industrial gas storage tanks:

Just like oil and petroleum storage tanks, we also provide storage tanks for gases and they are built to store gases in a compressed way for a longer period of time.

Industrial hot water storage tanks:

In these types of tanks ,Heat insulation is installed so that energy consumption can go low. But modern water heaters are made of applied polyurethane foam so that they can be used to store extreme hot water to fulfil industrial requirements.

If you are looking for any type of storage tank , Peso Licence Consultant, Petroleum Storage, Fastengineers and  Fabricators service, then you can contact-  Fast Engineers & Fabricators .

For more information about: Fastengineers and  Fabricators service Please visit at https://fastengineers.in/

[fastengineering]

INSIGHT ABOUT PETROLEUM at fastengineers.in

Petroleum-

It is the liquid form of hydro-carbon or mixture of hydro-carbons and any inflammable mixture such as liquid, viscous or solid containing liquid hydro-carbon

If you are into the business of petroleum storage, Solvent Licence Consultants, Peso Licence Consultants thenthen you must have the knowledge about how to store various classes of petroleum.

Containers for petroleum Class A

"Petroleum Class A" is the class of petroleum which has a  flash-point below Twenty-three degrees centigrade. Following points should be kept in mind while making or selecting the containers for Petroleum class A

1. Containers for this class should be constructed of tinned, galvanised or externally rust proofed sheet iron or steel and be of a type approved by the Chief Controller.

2. These types of containers shall be constructed in a secured manner as not to be liable except under circumstances of gross negligence or extraordinary accident to become defective, leaky or insecure in transit and they shall be kept in proper and continuous repair.

3. The containers shall have a well-made filling aperture which shall be fitted with well fitting and secure air tight screw plugs of screw caps.

Containers for petroleum Class B and Class C.

"Petroleum Class B"is the class of petroleum which has a flash point of twenty- Three degrees centigrade and above but below sixty-five degrees Centigrade;

"Petroleum Class C"is the class of petroleum which has the flash point of sixty- Five degrees

1.Containers for  both petroleum B and C classes shall be constructed of steel or iron and be of a type approved by the Chief Controller.

2. An air space of not less than 5 per cent. of its capacity shall be kept in each container for petroleum Class B and not less than 3 per cent. of its capacity in each container for petroleum Class C.

3. Nothing in this rule shall apply to the containers in the possession of the Defence Forces of the Union.

We Fast Engineer & Fabricators provide the best in class Petroleum storage tanks, and our one of the best Solvent Licence Consultants, Peso Licence Consultants. We along with the containers also provide assistance in obtaining Explosive licence / NOC for manufacturing, storage or transportation of explosives, petroleum products or compressed gases. We liaise with the concerned department on behalf of the client to obtain the requisite NOC / licence.

For more information about: Peso Licence Consultants Please visit at https://fastengineers.in/

[fastengineering]

TYPES OF PRESSURE VESSELS at fastengineers.in

Fast Engineer & Fabricators are known in the manufacturing field when it comes to Petroleum Storage in fast engineers, Pump Manifolds Service in fast engineers, Metal Fabrication Service in fast engineers, Installation of High-Speed Diesel Service in fast engineers and Pressure vessels.

Today we are going to focus on the pressure vessels.

Pressure Vessels

Pressure vessels are the form of enclosed containers that are used to hold liquids, vapours, and gases at a pressure significantly higher or lower than the ambient pressure. Pressure Vessel includes  equipment such as reactors, flash drums, separators, and heat exchangers which are widely used in various industries like petrochemical, oil and gas, chemical, and food processing industries.

Pressure vessels manufactured by Fast Engineer & Fabricators are operable within its design temperature and pressure, which is the pressure vessel‘s safety limits.

Types of Pressure Vessels

Pressure vessels are classified according to their purpose or geometry.

Types of Pressure Vessels According to its Purpose

Storage Vessels: Storage vessels are the type of vessels which are used to hold liquids and gases for industrial purposes. The most commonly used material for storage tanks is carbon steel.

Heat Exchangers: Heart Exchangers are basically a single-chamber pressure vessel that exchanges energy with the surrounding atmosphere.They are used to transfer heat between two or more fluids and are used in industries like food, pharmaceutical, energy, and bioprocessing

Boilers :In the case of boilers, the source of heat is fuel, nuclear or electrical power as sources of heat. They are typically composed of an enclosed vessel that allows heat transfer from the source to the fluid and are primarily used to heat liquids.

Process Vessels: Process vessels are the containers which are used for industrial processes such as mixing and agitation, decantation, distillation and mass separation, and chemical reaction. There is various type of process vessels including:

Distillation columns - It allows the separation of a mixture of liquids based on the difference in their volatilities.

Decanters- It allows separation of a solid-liquid or liquid-liquid mixture.

Industrial mixers - These types of equipment are equipped with motor-powered blades to homogenise and emulsify a single or multiple substances.

Chemical reactors are enclosed tanks that are used to contain the reactants and catalysts during a chemical reaction

Types of Pressure Vessels According to its Geometry

Spherical Pressure Vessels: These types of vessels are considered as ideal for containing high-pressure fluids due to their strong structure, but they are difficult and expensive to fabricate. Spherical vessels consume less amount of material than the cylindrical vessel if a pressure vessel of the same volume will be fabricated. The smaller surface area of the spherical vessel will also have less heat transfer from the hotter body compared to other shapes.

Cylindrical Pressure Vessels: Cylindrical pressure vessels are the type of vessels which are known for their versatility and are cheaper to produce than spherical vessels. But Cylindrical pressure vessels do not have the same strength as spherical vessels since it is reduced by the fittings used to connect the heads.

For more information about: Metal Fabrication Service Please visit at https://fastengineers.in/

[fastengineering]

SOME OF THE BEST SERVICE OF FAST ENGINEERS & FABRICATORS

Fast Engineer & Fabricators is one of the best manufacturers when it comes to gasoline station services, Petroleum Storage, Peso License Consultant, Fastengineers and  Fabricators service.

Pressure Vessels

Pressure vessels are one of the many products manufactured by Fast Engineer & Fabricators. These vessels are enclosed containers that are used to hold liquids, vapors, and gasses at a pressure significantly higher or lower than the ambient pressure. Pressure vessels such as reactors, flash drums, separators, and heat exchangers   are normally used equipments in industries like petrochemical, oil and gas, chemical, and food processing industries.

We provide various types of pressure vessels:

According to pressure - Storage Vessel, Heat Exchangers, Boilers, Process Vessels

According to its Geometry - Spherical Pressure Vessels, Cylindrical Pressure Vessels, Hemispherical heads, Torispherical heads, Ellipsoidal heads,

Pile Casing

Segmental casing basically acts as a temporary support for a bored piling system with deeper unstable soil conditions. We provide best quality fabrication which is utilized during the drilling stage and can be installed and extracted by using a drilling rig or an oscillator attached to a rig, service crane or power pack.

Penstock

Penstocks are the long channels that are used to carry water down from the hydroelectric reservoir to the turbines inside the actual power station. They are made of steel and water and are a vital component of a hydroelectric facility that allows water to move to the turbine. Grates or filters can be attached to the ends of penstocks to trap large debris such as branches which ensures that debris cannot enter the channel and block it.

The flow of water which should go through the penstock can be controlled with a sluice, which is simply a gate that can be raised and lowered to increase or decrease the amount of water allowed to flow through. When you want the water to flow freely through penstock then the sluice should be fully open and vice versa.

Fast Engineer & Fabricators help you with the penstock projects from start to end delivering geometry assistance, strength and performance calculations, modeling, in addition to our fabrication and coating services.

Industrial Steel Stacks

A steel stack is not just a steel stack but is a solution which combines operation, maintenance and also design and look to form a perfect whole.

Fast Engineer & Fabricators specializes in custom design, fabrication and installation of steel stacks for air pollution control, process exhaust systems and accessories for emission control systems. The product provided by us include self-supported, free-standing and tower supported steel stack systems available in dual wall or multiple flue configurations.

Some of the processes our structural steel fabricators follow:

We ensure that the design of tanks is according to the code, client specifications, and jurisdiction requirements.

We ensure to have rigid quality assurance systems in place and regular audits by independent inspectors to qualify our processes.

We have in-house inspectors in place to monitor the project.

For more information about: Fastengineers and  Fabricators service Please visit at https://fastengineers.in/

[fastengineering]

Shop-Built Tanks vs Field-Erected Tanks

From initial engineering to fabrication and from field construction to surface prep and coatings, our expertise provides you the best in class service of metal  and steel fabrication.

To ensure that our products are as per standards, can withstand environmental conditions and are to the level of customer satisfaction, we make our products go through extensive testing.

Some of the steel fabrication services provided by us includes:

Shop-Built Tanks

Shop-built tanks are like the daily bread of steel fabrication companies. It is basically an above ground storage tank used to contain fertilizer, water, oil, a processing chemical, or some other liquid. The size of the tank is a very important factor to consider the type and usefulness of the tank. Shop-fabricated tanks usually range in size from a few thousand gallons up to between 30,000 and 50,000 gallons.  As the name defines, the tank is assembled in the tank manufacturer’s shop and then transported to the customer’s tank site.Not only this, the size limitations for shop-fabricated tanks are based on the size of equipment and shop space to handle the tank construction.

Field-Erected Tanks

Field erected tanks got this name  because they are too large to be put together inside a shop facility and transported to the project site.

Field erected storage tanks normally start from 50,000 gallons and range all the way to several million gallons.  It is so because these aboveground storage tanks are so large in size, all of the materials for the tank are transported to the tank site and assembled to create the storage tank

Shop-Built Tanks vs. Field-Erected Tanks

There are three primary differences between field-erected and shop-built tanks. These are:

Cost. Field- Erected tanks are expensive while Shop-built tanks are generally the more affordable option.

Size. Size is an important difference. Among the two, shop-built tanks have limited transportation capacity while the field-erected tanks have no size limit.

Timeline. Tanks fabricated start-to-finish in the shop have a much more dependable deadline than field-erected tanks because the shop is a controlled environment, not susceptible to disturbances like the weather.

Fast Engineer & Fabricators are one of the leading manufacturers of Tank fabricator Service, Solvent License Consultant india, Petroleum Storage, Peso License Consultant.  Reason that makes us stand out in the crowd is the consistency is quality and teamwork. We keep pace with the dynamic environment and keep trying to find ways to provide the best quality at the best possible price.

For more information about: Solvent License Consultant Please visit at https://fastengineers.in/

[fastengineering]

FAST ENGINEERS & FABRICATORS CONSULTANCY SERVICE

The acts with which Petroleum and Explosives Safety Organisation is abided by are made to control the import, export, transport, storage and usage of explosive materials, petroleum storage, cryogenic vessels, Flammable materials, pressure vessels, design and installation of all necessary and relevant infrastructure etc. There are various PESO licence consultants just like Fast Engineers & Fabricators that help people to understand about the rules and regulations given under these acts.

There are various products, for the dealing which requires Petroleum Products-storage licence. This list includes products such as  Item that are declared under Inflammable substances act 1952 are covered under petroleum Rules 2002 and Petroleum Products having Flash point 93 degree centigrade and above attracts No License Intimation and approval under petroleum Rules 2002. The products are divided into few categories including

Class "A" Petroleum Products  - Hexane, Toluene, Acetone, Ethanol. Methanol, M.E.K, Naphtha, Benzene, Petrol, Pentane, SBP Solvent, Petroleum products having Flash Point below 23 degree centigrade etc.

Class "B" Petroleum Products includes - C-IX, Diesel (HSD), Aromax, M.T.O, Kerosene (SKO), Petroleum products having Flash Point 23 degree centigrade & above but less than 65 degree centigrade etc.

Class "C" Petroleum Products includes - Furnace Oil, L.D.O., Petroleum products having Flash Point 65 degree centigrade & above but less than 93 degree centigrade etc.

For getting an Explosive Licence for the products mentioned in the act - 2 applications need to be filed. The first one is Application for Approval and the second one is Grant of Licence

Documents required for Applying for Approval

Form No IX duly signed by Authorised Person

D/D of Rs 400/- in the name of THE CHIEF CONTROLLER OF EXPLOSIVE, payable at Mumbai in case of ground Tank and Nagpur in case of Overhead tank.

4 Copies of Plant Layout, Elevation Construction Details, and Details of tank site plan of 100 Mtrs & some notes.

Establishment will get the Approval for Explosive Licence.

Documents required for Grant of Licence

Form No.IX Duly Filled and Signed by the Employer.

Rs.______ /-D.D (@ Rs 1000/- for 50 kilo litre Per year)

4 Copies of Plant Layout as above

NOC From Collector / Dist Authority

Factory Regn. Copy. (SSI or LSI)

Memorandum of Articles/ Partnership Deed)

Project Report

Some Photograph of Plant tank area Etc

Tank Testing Certificate from Chartered Engineer

NOC from the supplier of the Petroleum Product

Fast Engineers & Fabricators helps you in attaining the licence by sharing your burden of completing the documentation and filing for the same. Along with Peso Licence Consultant, we also provide assistance for Fastengineers and  Fabricators service, Petroleum Storage

For more information about: Gasoline Station Services Please visit at https://fastengineers.in/

[fastengineering]

PETROLEUM STORAGE AND IT'S STORAGE LIFE

Just like other necessities, Petroleum and various other oils have also become daily in our lives. For example, we use fossil fuels on our daily basis to  run our vehicles and to power our electric generators.

But the point to focus here is that these petroleum products are  highly flammable and volatile substances in nature and can prove to be very dangerous if not handled  carefully. Substances  like these should be stored, handled and disposed of properly (in a legal way) to avoid any potentially hazardous situations. There are regulations and guidelines set by government authorities handling common fuels and oils in a safe way

If products like gasoline come in direct contact with your skin, wash with soapy water immediately to avoid any skin irritation.

Never smoke or light a match near petroleum storage tanks or the gasoline because it evaporates easily and is highly inflammable.

You should only use petrol. Never use petrol in any kerosene heaters or lamps and never mix it with diesel because such things should only be used for its intended purpose, which is as a motor fuel

How to store Petrol?

As far as the storage of petroleum is concerned, fast engineers & fabricators suggest that it should always be kept and stored at room temperature, away from all heat sources, including the sun or a water heater. Other points to keep in mind while handling petrol are that the tank lid is tightly sealed to avoid spillages; fill these types of substances only in an approved fuel can or tank and make sure to leave some room in the container to allow for expansion; store it is in a detached shed or garage away from any ignition sources.

How long can petrol be stored?

The time period for which petrol can be stored varies with how it is stored because petrol is a mixture of many components with different properties that contribute to the performance of the fuel. For example,When petrol is kept in an open container fully  exposed to the air, it will - in no time - completely evaporate. Petrol, when in sealed containers, can be stored for around one year but once a seal is broken the fuel has a storage life of six months at 20°C or three months at 30°C. When stored in equipment tanks the storage life is one month. In contrast, storing diesel fuel is much easier just by keeping it cool and dry. Under ideal conditions, diesel can be stored for up to 12 months.

If you are eager to know about Petroleum storage tanks, fast engineers Service and Explosive licence for storage of diesel - then contact the best provider of petroleum tanks -Fast Engineers & Fabricators

For more information about:Petroleum Storage Please visit at https://fastengineers.in/

[fastengineering]

MARKET OVERVIEW OF METAL FABRICATION INDUSTRY

Any type of industrial activity is an integral part of society and nations and is known as. the economic lifeline of the world. Various industrial activities  are interrelated and interdependent and when it comes to metal Fabrication services it is considered as one of the backbones of industrial operations. Metal fabrication basically refers to any process that includes cutting, shaping or moulding metal and turning it into the final product. Fast Engineers and Fabricators service uses various metals  such as  aluminium, titanium, brass, copper, gold, iron, nickel, silver, magnesium, iron tin, titanium, and various grades of steel.

Segmentation

Looking from a service angle, it can be segmented into Metal Punching, Metal Stamping, Metal Forming, Metal Welding, Metal Cutting, Metal Polishing, and other services.

The material’ side makes it segmented into steel, aluminium, and other metals.

On the basis of end-user industry, the metal fabrication service market can be segmented into Oil and Gas, Construction, supply and installation of petroleum storage-tanks Aerospace, Marine, Automotive, Military, etc.  

Market Overview

Metal fabrication services are known as the backbone of industrial operations for a reason as the Indian fabrication industry is considered as one of the few bright spots in the global fabrication industry. The major market driver for the global metal fabrication service market is taking a shift towards automated fabrication resulting in lower prices, increased the efficiency of the fabrication process and fewer accidents during fabrication process.

The Indian fabrication market has transformed to a great extent over the past few years and is expected to grow at 5.5% over the forecasted period.owing to factors, such as the increasing demand from the manufacturing sector, the rising preference toward pre-engineered buildings and components, and government initiatives toward infrastructure development activities. Coming to the technological advancements, though the adoption rate is low in the sector, it is consistently improving and helping the industry in producing accurate designs of metal structures.

The India metal fabrication market includes a large number of small- and medium-sized companies helping with the rising demand for goods and services across various sectors in India, combined with the fact that global manufacturing companies focus to diversify their production by setting-up low-cost plants in countries, like India, is expected to drive the Indian manufacturing sector.

The key market restraint for the global metal fabrication service market is the rise of alternate technologies and Fast Engineers & Fabricators is a company which is investing a lot in it trying to keep pace with the changing world.

For more information about:metal Fabrication services Please visit at https://fastengineers.in/

[fastengineering]

CONTRACT MANUFACTURING at fastengineers.in

Why Fast Engineers & Fabricators? We have brought many reasons to your knowledge. So today we are here again with a new reason. We now not only provide Petroleum storage tanks, fast engineers Service, Explosive licence for storage of diesel but also provide the facility of Contract manufacturing. It is a process in which a small business hires or gets into a contract with another company to produce its products and is especially beneficial  for small businesses as it enables people to begin selling their products without obtaining the large amount of capital necessary to run a factory.

In other words, in the process of contract manufacturing, contract manufacturers enter into an agreement with a company to produce some components, or whole product for the company as per their requirements and specifications. The manufactured products can then be used by the other party in the manufacturing or the completion of their own products.

We are known to provide various benefits when you hire us as a contract manufacturer:

Economies of scale- This benefit at first might not look that promising but if you look at this from an angle that Contract Manufacturers don't have only one but multiple customers that they produce for. Because of the multiple customers, they can offer reduced costs in acquiring raw materials by benefiting from economies of scale. The more units there are in one shipment, the lesser will be the expense per unit.

Cost Savvy: The most important benefit for any firm is cost saving and going with contract manufacturing is really cost savvy as Companies save on their capital costs because they do not have to pay for a facility and the equipment needed for production. Not only on facility and equipment, they can even save on labor costs such as wages, training, and benefits. Some companies may look to contract manufacture in low-cost countries, such as China, to benefit from the low cost of labor.

Advanced Skills: This is one of the most important features of contract manufacturing. With the help of contract manufacturing companies can take advantage of skills that they may not possess, but the contract manufacturer does. Also the contract manufacturer is likely to have relationships formed with raw material suppliers or methods of efficiency within their production.

Quality: Contract Manufacturers are likely to have their own methods of quality control in place that help them to detect counterfeit or damaged materials early and take required actions accordingly.

Focus: With our help you can focus on your core competencies and various other activities better if they can hand off base production to an outside company.

We are the leading service provider Petroleum storage tanks, fastengineers Service, Explosive licence for storage of diesel and also the service of contract manufacturing provided by us is known to be the best in terms of the quality and standard.

So to receive these best in class services - contact https://fastenginee

For more information about:Petroleum storage tanks Please visit at https://fastengineers.in/