#unbrick flash file | Explore Tumblr posts and blogs

huntergadgets579 · 3 years ago

Text

Mt6735 Database File

Mt6735 Database Files

What Is Database File.db

Mt6735 Database File Download

Mt6735 Database File System

Mt6735 Database File Format

Mt6735 Database File Download - polasopa. Onthis page, we have contained the official link to download databasefile (AP, BP) which can be use to restore Null, INVALID imei on MediatekPhones.To flash IMEI using Mediatek IMEI Writer Tool or Maui Meta Toolon Mediatek mobile device you must have the database file (AP, BP),well here we share the. Aplus Zee Z10 MT6735 Firmware ROM (Flash File). Download the latest Stock ROM for Aplus Zee Z10 MT6735. Operating system optimization, hang logo fix, bootloop fix, and unbrick,Besides, firmware also help you to remove password and bypass FRP. Download firmware for Aplus Zee Z10 MT6735: AplusZeeZ10MT6776.0.rar AFH – Mshare Premium Download: Tool: SP. Select Correct Mobile CPU type From Setup or Sp Tool and Choose flash file. Turn off the Mobile, remove the battery. Connect the Cellphone with USB data cable through Computer and insert Mobile battery again. Click on flash & then wait for the complete flash; Complete of Flash remove USB data cable and power on the device. Enjoy it has done. A scatter file is a text (.txt) file which contains the partition table (addresses) of your device. Think of a scatter file as a map which tells Mediatek flash tools which partition to flash each file in your firmware to. A Mediatek firmware contain several files, scatter file is just one of them. Its therefore important that you not mistake.

(Free) Download QMobile Z12 Pro MT6735 Android Marshmallow v6.0 Hang On Logo Dead After Flash Infinity Cm2 MTK Update Tested Latest Software Firmware Flash File MT6735__QMobile__Z12_PRO__Z12_PRO__6.0__WBL7519QM_0401_T5820 About Mobile Name:--- Qmobile Mobile Model number:-- Z12 Pro Device CPU Type:-- MT6580 Android Version:-- Marshmallow v6.0 Country:--Pakistan Language:-- Multi Password:-- Nothing Credit:-- Free

Requirements For Flashing I:- Download and install MTK USB Mobile driver II:- Download and install any Mobile supported box / Dongle setup like Infinity Cm2, Miracle Box, SP Flash Tool How To Flash QMobile Z12 Pro MT6735 Infinity Cm2 Read Firmware

Mt6735 Database Files

Download and install MTK USB Mobile drivers and box / Dongle setup

Download Flash File From Link and extract it

Open Miracle Box or any supported box setup / Dongle.

Select Correct Mobile CPU type From Setup or Sp Tool and Choose flash file.

Turn off the Mobile, remove the battery.

Connect the Cellphone with USB data cable through Computer and insert Mobile battery again.

Click on flash & then wait for the complete flash

Complete of Flash remove USB data cable and power on the device.

Enjoy it has done.

Note:Please make a back up of your device before install or update Flashing File.

Charge your Mobile Battery At least 80%

What Is Database File.db

Password:-forum-gsmunlock.com Download Click Here

All MTK IMEI Repair NVRAM Database Files With Tool Free 2021

As you know Database/DB files in Android MTK Smart phone used for repair IMEI of the phone, so here is some DB files or Database Files for Micromax MediaTek CPU, using this file you can repair IMEI all most all MTK base Android phones.

The below is the details of the database files for Micromax Android smart phones. Here is some collection of these files.

All MTK IMEI Repair NVRAM Database Files With Tool Free 2020

Supported CPUs Mt6252 Mt6260 Mt6261 Mt6571 Mt6572 Mt6575 Mt6577 Mt6580 Mt6582 Mt6589 Mt6592 Mt6735 Mt6735m Mt6752 Mt6755 Mt6795 Mt6797

If you have a plan of tweaking your android device, you should backup your IMEI number or atleast DB file in case of emergency. While flashing ROMs you can lost your IMEI number and you will not be able to use SIM card without this. If you have a rooted device you can easily backup your IMEI or Database file. You can also use MTKdroid tools to backup your IMEI. Here we will tell you how to backup DB database file.

SN Write Tool is a small application for Windows Computer, which allows you to write or flash IMEI on MediaTek devices.

Here on this page, we have shared the latest version of the SN Write Tool and the previous versions.

Flash Single or Multiple IMEI:

It allows you to Flash or Writes Single or Multiple IMEI (supports IMEI up to 4) on Mediatek smartphones and tablets.

Various Write Options:

It allows users to flash various options apart from flashing the IMEI only. It supports Barcode, BT Address, Wifi Address, Wifi EPPCopy, Mac Address, DRMkey MCID.

Mt6735 Database File Download

IMEI Lock:

Mt6735 Database File System

It allows users to flash or remove the IMEI lock option in the Mediatek Smartphone and tablets.

Mt6735 Database File Format

2,244 total views, 37 views today

1 note · View note

loadbeach931 · 4 years ago

Text

Nokia 111 Flash File

Nokia 1203-2 Rh-111 Flash File

Nokia Flash File

Today I am going to share Nokia ta 1130 flash file free download link with Nokia ta 1130 flash tool and flashing guide. Also, you can download Nokia 1 Plus Da File from the given link below.

Why would you want to flash Firmware on your Nokia 1 Plus TA-1130?

There are various reasons to flash Firmware on Nokia 1 Plus TA-1130. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it. If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.

The Benefit Of Nokia 1 Plus TA-1130 Firmware:

Flash Stock ROM To Unbrick

Update and downgrade

Unroot or fix bugs on the phone

To solve the lag or stutter

By flashing Stock ROM, you can fix software issues.

Revert to stock to get your warranty

Keeps rebooting issue

if your phone boots straight into recovery

Phone boots straight into its bootloader

Nokia 1 Plus TA-1130 Firmware Details:

Nokia 111 rm810 v3.51 latest flash file 100% tested file. MCU+PPM+CNT DOWNLOAD NOW. Categories Ultimate Posts. Nokia 225 Bin Firmware Flash File 100% Tested Download. By GSM Solution BD. This article of about Nokia 225 bion flash file.Download Nokia 225 official. Read more → Nokia Asha 306 RM-767 Firmware Flash. Avatecc is an Online and offline Mobile Phones and Computers Sales and repair outlet, we provide a comprehensive collection of Firmware for many smartPhone brand.

Gapps File: Included

Device Supported: Nokia 1 Plus TA-1130

Tool Supported: SP Flash Tool

Processor: MediaTek MT6739

OS: Android 9.0

Requirements to flash Nokia 1 Plus TA-1130 Stock ROM:

Supported Phone: Nokia 1 Plus TA-1130 Stock ROM

Charge your mobile: You may no less than a half charge.

Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Nokia 1 Plus TA-1130 Firmware Backup

Before going to install Nokia 1 Plus TA-1130 stock ROM, you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

2. Download Nokia 1 Plus TA-1130 Flash Tool And Drivers:

A.Download and install Nokia 1 Plus TA-1130 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Nokia 1 Plus TA-1130 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Nokia 1 Plus TA-1130.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Nokia 1 Plus TA-1130.

Instructions to Flash Nokia 1 Plus TA-1130 Stock ROM:

1. Download Nokia 1 Plus TA-1130 flash file zip file is given above and extracts it on your computer.

2. Download Nokia 1 Plus TA-1130 USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your Nokia 1 Plus TA-1130 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

5. As soon as the SP Flash tool is launch, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference, see the picture given below.

8. Now click on the “Download” button to start the flashing process.

9. Next, join your Nokia 1 Plus TA-1130 Android device to your computer using the USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Nokia 1 Plus TA-1130 Android device.

Follow Detailed Instruction Nokia 1 Plus TA-1130 Firmware Flashing With Sp Flash Tool.

Nokia 1203-2 Rh-111 Flash File

Disclaimer:

Please read and understand the Full Guide Before Flashing Nokia 1 Plus TA-1130.

Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.

Before flashing, Stock ROM Nokia 1 Plus TA-1130 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Nokia Flash File

Download Nokia 1 Plus TA-1130 Flash File:

1 note · View note

mublog652 · 4 years ago

Text

SAMSUNG_Android_SCH-I535 Driver Download For Windows

Here you will find all the latest Samsung firmware for Samsung Galaxy S3 SCH-I535. If you are looking for Samsung Galaxy S3 SCH-I535 stock ROM firmware, then you are on the right page.

Before downloading, make sure your device is Samsung Galaxy S3 SCH-I535, if it is not, then flashing the below stock firmware can brick your device.

The Samsung Galaxy S3 SCH-I535 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device.

This tool allows you to monitor and manage your RAID arrays in the Microsoft Windows environment or via remote login to your system. For detailed instructions on how to use the AMD RAIDXpert utility, please refer to the associated user's guide. Laptop or PC with Windows XP or Windows 7, or Windows 8.1, or Windows 10. RAM: 1GB or higher; CPU must be Pentium 4; 2.4 GHz or higher. Screen Resolution must be 1024 x 768 (600), 32 bit or higher. Windows Media Player version 11 or later. To use this software on Mac, you must need. A Samsung Android phone with Android version 4.3 or later.

Download Samsung Galaxy S3 SCH-I535 Firmware

File Name: I535VRBMF1_I535VZWBMF1_VZW.zip

File Size: 799 MB

Country: USA (Verizon)

Android OS Version: 4.1.2

Samsung_android_sch-i535 Driver Download For Windows 10

File Name: I535VRUDNE1_I535VZWDNE1_VZW.zip

File Size: 974 MB

Country: USA (Verizon)

Android OS Version: 4.4.2

Also Download: Samsung Galaxy S6 SC-05G Stock Firmware

How To Flash Samsung Galaxy S3 SCH-I535 Stock Firmware

Download and extract the Samsung Galaxy S3 SCH-I535 firmware package on your computer.

After extracting the package, you will find USB Drivers, flashing tool, and firmware files.

Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC.

Launch the firmware flashing tool and load the Samsung Galaxy S3 SCH-I535 firmware files inside the flash tool.

Connect your device to the computer using USB cable and begin the firmware flashing process.

Once the flashing is completed, you will see a success message.

Disconnect your Samsung Galaxy S3 SCH-I535 device from the computer and restart the device.

Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device.

Samsung Sch I535 Specs

[*] Take a Backup: If you are going to flash the above firmware on your Samsung Galaxy S3 SCH-I535 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

Samsung Android Usb Driver For Windows 10

[*] Broken link?Report here.

Samsung_android_sch-i535 Driver Download For Windows 7

[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

1 note · View note

shinyquagsire23 · 5 years ago

Text

🔋 📱❄️🥾🔓, an EL1/EL3 coldboot vulnerability affecting 7 years of LG Android devices

I should probably preface all of this by saying that I'm not really a security professional in the sense that I don't actually do security stuff for a living; I reported this vulnerability in March and gave a 90 day delay on releasing specific details mostly just because that's A Thing That Security Researchers Do. Also the vulnerability doesn't require user interaction from coldboot so it's a bit nasty in that regard. But also this vulnerability sat around for 7 years so it could be argued that, if anything, 90 days is too long.

Anyhow jumping into things, this is a writeup documenting CVE-2020-12753, a bootloader vulnerability affecting most Qualcomm-based LG phones since the Nexus 5, all the way up to the my test device, the LG Stylo 4 Q710 (and 5 Q720), and probably others. While working on the implementation of this vulnerability I thought it was odd how few bootloader vulnerabilities for Android actually get properly documented, and given the sheer spread of affected devices of this particular vuln I thought it'd be interesting to document it in detail.

A Quick Primer on the (Qualcomm) Android Boot Process

The device I'm working with, the Stylo 4, operates on 2013-2016 variant of Qualcomm's boot sequence described at https://lineageos.org/engineering/Qualcomm-Firmware/:

- On power-on, the Primary Bootloader (PBL) initializes DRAM, eMMC, etc and then loads and verifies SBL1 (Secondary Bootloader 1) from eMMC. - SBL1 then loads and verifies the Trusted Execution Environment (TEE), aboot, and a few other bits and pieces and then jumps to the TEE, in this case Qualcomm's Secure Execution Environment (QSEE) - QSEE sets up secure EL3/EL1 (TrustZone) and jumps down to aboot (non-secure EL1) - aboot loads and verifies the Linux kernel and jumps to it

Some Android devices allow "bootloader unlocking", which allows unsigned kernels to be loaded and run. Generally this unlocking occurs via aboot, and the implementation varies from vendor to vendor, however in most cases what happens is that a fastboot command gets sent to the phone to unlock/lock the phone, and as part of Android's Verified Boot, the phone's storage is wiped on this transition. There's also some requirements on user verification so that, in theory, this unlock cannot occur without user interaction.

Additionally, with verified boot enabled, Android will use dm-verity to verify all files on the root/system partition, and SELinux is run as Enforcing.

Variants on the Boot Process, added by LG

In practice, the boot process isn't quite so simple: Vendors are able to add modifications to the boot process as they see fit. In LG's case, these differences can be summarized as follows: - Hardware bringup in SBL for charging PMICs, LEDs, and other misc hardware - Misc logging/debugging modifications - Additional TEE processes for SIM unlocking, backed by RPMB - In aboot, vendor-specific fastboot commands (or no fastboot at all in the case of my device), restrictions on unlocking via certificates, verification modifications, additional boot args for Linux, etc - Vendor-specific recoveries/flashers, LAF in the case of LG

While I initially started in a privesc from within Linux (and got ~close to getting kernel execution), Google has done a lot of work to ensure that vendors can’t mess up Android security. However, bootloaders have a lot less oversight, so going after these vendor-specific bits of hardware bringup seemed extremely opportune for errors.

Introducing: raw_resources

At an undetermined point in time (likely prior to the Nexus 5 releasing), LG added an "imgdata" partition on eMMC to store boot graphics for Download Mode, fastboot graphics, charging graphics, the unlock graphic and so on. Image data is stored RLE compressed and for each image, metadata for the image width, height, x and y position are specified. The Nexus 5’s final bootloader image, as far as I can tell, only accesses this partition from aboot; SBL1 is not affected on this device. For the curious, I have a Python3 script which can extract these images at https://gist.github.com/shinyquagsire23/ba0f6209592d50fb8e4166620228aaa5.

A few examples of Nexus 5 imgdata resources

imgdata later became raw_resources, and at an undetermined point, the same RLE decompression and metadata interpreting was copied into SBL1 for use in boot paths where the battery has discharged significantly. If the battery is discharged too far, SBL1’s pm_sbl_chg_check_weak_battery_status will display LGE_PM_NO_CHARGER for boot attempts made without a charger connected, LGE_PM_WEAK_CHARGING_ON for boot attempts with a charger connected, and LGE_PM_NO_BATERY_ANI_* for boot attempts made without a battery. A script for extracting raw_resources can be found at https://gist.github.com/shinyquagsire23/b69ca343fd2f246aee882ecb5af702bd.

A few examples of Q710 resources

On normal boot paths, aboot reads raw_resources to display the boot logo, download mode graphic, and verified boot statuses for devices which allow unlocking. In my case, the Q710/Q720 does not allow for unlocking, so this boot path is never reached on these devices. However, the graphics still exist I guess on the off chance that they allowed it to happen.

For the C inclined, the format of raw_resources can be summarized in these structs: typedef struct boot_img_header { char magic[0x10]; uint32_t num_imgs; uint32_t version; char device[0x10]; uint32_t signature_offs; } boot_img_header;

typedef struct img_info { char name[0x28]; uint32_t data_offset; uint32_t data_size; uint32_t width; uint32_t height; uint32_t offs_x; uint32_t offs_y; } img_info;

The following calculation is performed in order to determine the output pointer to be used during decompression: bpp = 24 screen_stride = fbinfo->screen_width; fbuf_offset = offs_x + (screen_stride * offs_y); fbuf_out = (fbuf_offset * (bpp / 8)) + fbinfo->buffer;

offs_x and offs_y are not bounds checked, and fbinfo->buffer is known in SBL1 and aboot, allowing for a controlled arbitrary write in both environments.

SBL1 load_res_888rle_image Arbitrary Write

This boot path requires discharging the battery to below 0%. While this is less feasible for any practical usage, performing the arbitrary write at this point allows patching SBL1 to disable signature verification before TEE and aboot are loaded. Any of the LGE_PM_* images can be hijacked selectively for arbitrary code execution, though for my PoC I used LGE_PM_NO_CHARGER specifically because I didn't want to accidentally brick myself (or well, I didn't want to have to beep out eMMC wires on the board to unbrick).

A 32-bit x offset can be calculated for any given address divisible by 3 using the following calculation: offset_x = (((0x100000000 + target_addr) - 0x90000000) / 3) & 0xFFFFFFFF

Data written to this arbitrary address can be kept contiguous by specifying the image width to be the same as the screen width. The height should then be rounded up from the payload size to ensure all data is written properly. So really by the end, this isn't an arbitrary write so much as it is an arbitrary memcpy at Secure EL3.

aboot Arbitrary Write

The aboot arbitrary write functions identically to SBL1: Any image can be selected to perform the arbitrary write. Most notably, this includes any lglogo_image_* graphic, which is displayed by default on every boot. The framebuffer is generally fixed to address 0x90001000, which means that by using the arbitrary write to gain code execution, the original graphic which was used to obtain the arbitrary write can be written to the screen following hijacking to, in effect, make it appear as if boot flow has not been modified at all, for better or for worse.

A good question that might be raised after looking briefly at the structs earlier would be, "wait, there's a signature offset, why does any of this work if raw_resources contains a signature?" And yes, raw_resources contains a signature! But it's a useless signature because this signature is only checked in aboot while displaying verifiedboot_* images. At some point, XDA users found out that you could swap the LG boot logos over the verifiedboot_* images so that when they unlocked their devices they wouldn't have to see the AVB boot nag messages. Naturally, this defeats the point of Google's Verified Boot spec since it would potentially allow a bootloader be unlocked without the user knowing, so LG added a signature. But it’s only checked for the verified boot images.

As a minor note, unlike SBL1, aboot will also select between raw_resources_a and raw_resources_b depending on the A/B boot slot.

Practical Exploitation

I started by exploiting SBL1, partially because Secure EL3 is just cooler than nonsecure EL1, but also because the framebuffer address was more obviously seen than in aboot (though I later found the aboot framebuffer address anyhow). At this point in execution all of the hardware is initialized and no other bootloaders have been loaded, so we're basically free to patch sigchecks and control the entire phone!

As it turns out though, SBL1 takes a bit more work to actually exploit, because unlike aboot, its segments aren't set RWX. I'm not really sure why aboot has all of its segments RWX, like at that point it's more of a 'boot' than a 'secure boot' if they can't even bother to use the easiest security option available.

In any case, ROP is required briefly to bypass the MMU's NX bit. This isn't too terrible, since SBL1 actually has a routine we can jump to to disable the MMU, though it requires a bit of finnagling to get correct.

So in summary, the exploitation process goes as follows: - Flash raw_resources_a.img to eMMC (ie via kernel execution, LG LAF, soldered wires and a hardware flasher, etc). - For SBL1 hax, drain the battery to below 0%. For my Q710, I drained most of the battery by leaving the screen at max brightness with sleep disabled until the phone powered off on its own after several hours. To drain the remaining battery, I charged enough to enter LAF download mode and left it to drain with the screen on for 2-3 hours. - Hold Power and Volume Down until the phone restarts. If the phone discharged enough, the phone should restart into the payload. - The phone can be plugged in to boot into aboot and Android normally, but the payload will now execute every time the payload-injected graphic is displayed.

To exploit SBL1: - raw_resources_a is modified such that the x offset is set to 0x2801CF5C, the width to 1080, and the height to 5. This will decompress LGE_PM_NO_CHARGER (now containing the contents of payload.bin) to 0x08056E14, slightly higher than the stack pointer during decompression. - The image is decompressed and load_res_888rle_image exits. The previous LR has now been overwritten by a pointer to a Thumb-mode pop {pc} ROP slide, to account for possible offsetting error. - At the end of the ROP slide, the following ROP instruction sequence is executed:

pop {r4-r12, pc} ; r8 is now set to SBL1_ARM_MMU_DISABLE, and r12 is now set to SBL1_THUMB_BX_R8

pop {r4-r6, lr} ; LR is set to the payload pointer orr r12, r12, #0x1 bx r12 ; jump to SBL1_THUMB_BX_R8

bx r8 ; jump to SBL1_ARM_MMU_DISABLE with lr now set to our payload

youtube

Proof-of-Concept, and Future Plans

For those interested in experimenting, a PoC can be found here. Note that this is specifically for the LG Q710, and contains offset specific to the AMZ LG Stylo 4 (Q710ULM, 20c_00_AMZ_US_OP_1121). I'm planning on polishing things up further, however my current boot takeover involves two other vulnerabilities that I'd like to give a bit more time to make sure they're actually fixed/close to being fixed before releasing.

In the meantime I'd be interested in seeing if anyone else is interested in porting this to other LG devices, since I only own a Nexus 5, a Q710 and a Q720. As it is, these vulns will allow bootloader unlocking at a minimum on most older Qualcomm LG devices, and secure EL3 on newer ones, which should be very interesting for anyone interested in finding vulnerabilities in QSEE/similar on LG devices.

#CVE-2020-12753 #exploitation #bootloader #Android #Android ROMs

9 notes · View notes

planetageeklata · 4 years ago

Text

De qué manera instalar Stock ROM en Nyx Join Claro / Telcel (Unbrick / Update / Unroot)

Si eres usuario de Nyx Join Claro / Telcel y buscas el firmware original del dispositivo, luego aterrizó en la página adecuada. El archivo oficial de Stock Firmware / Flash de Nyx Join Claro / Telcel ya está libre para descargar. Solo necesita solicitar permiso para descargar el fichero. Compartimos una guía paso a paso para instalar el firmware oficial Nyx Join Claro / Telcel. No intente suprimir ningún paso pues cada paso tiene su relevancia en esta guía. Si no sigue la guía adecuadamente, puede terminar bloqueando su dispositivo. Hemos recopilado más información sobre Nyx Join Claro / Telcel Stock ROM cara abajo. Si lo quiere, puede leerlo desde abajo.

El Nyx Join Claro / Telcel funciona con una CPU MediaTek. Es un teléfono inteligente de gama muy media con especificaciones de nivel medio. El firmware de stock disponible es para MediaTek MT6537M El firmware es de cerca de cuatrocientos sesenta y dos MB, por lo que aconsejamos tener wi-fi estable mientras se descarga el firmware. Esta ROM se puede actualizar utilizando SP Flash Tool. El nombre oficial del firmware de stock Nyx_Join_Telcel_MT6572_4.2.2.zip. El firmware se fundamenta en el sistema operativo Android cuarenta y dos Jellybean de Google.

Nyx Join Claro / Telcel Stock ROM Detalles:

- Formato de descarga: rar / Zip Verison - Tipo de firmware: Oficial span > - Herramienta compatible: SP Flash Tool - Archivo Gapps: Incluido span > - Dispositivo compatible: Nyx Join Claro / Telcel Publicación relacionada

- Make seguro que el porcentaje de batería es superior al sesenta por cien - Instale el supervisor VCOM en su teléfono . - Instale los controladores ADB y Fastboot en su computadora. Guía: para Windows, Mac o bien Linux - Ahora habilita la opción de desarrollador. lapso> - Realice una copia de seguridad completa de su dispositivo . Si tiene TWRP instalado en su dispositivo, cree una copia de respaldo nandroid. Descargar Nyx Join Claro / Telcel Flash File / Stock ROM

- Descargue la última herramienta SP Flash Descargar Stock ROM para Nyx Únase a Claro / Telcel Pasos para instalar la ROM de stock oficial en Nyx Únase a Claro / Telcel

1 note · View note

techmesto · 1 year ago

Text

Download Nokia G42 stock firmware (ROM) for flash/unbrick

Nokia G42 is currently the cheapest Nokia smartphone with 5G connectivity. It is a successor to the Nokia G50, launched in 2021 at a similar price. If you own the shiny new Nokia G42 and it suffers from a problem, having the stock firmware may help. You can use the firmware to unbrick the phone or to extract the files for any other use case – such as to extract the stock wallpapers or the Camera…

View On WordPress

#Nokia Firmwares #Nokia G42

0 notes

azdrivers · 4 years ago

Text

Download Micromax Q351 Stock Firmware (Flash File)

Micromax Q351

This page contained the official link to download Micromax Q351 Stock Firmware ROM or flash file. This official firmware are mainly use for flashing, updating or unbrick your android mobile phone. The firmware comes as a zip package, which is required Firmware, Flashing Tool and compatible USB Driver as require. You can find How-to flash instruction on this page.

If you own a…

View On WordPress

1 note · View note

azvietroot-blog · 4 years ago

Text

Download Samsung GT-I9128V Stock Firmware (Flash File)

Samsung GT-I9128V

This page contained the official link to download Samsung GT-I9128V Stock Firmware ROM or flash file. This official firmware are mainly use for flashing, updating or unbrick your android mobile phone. The firmware comes as a zip package, which is required Firmware, Flashing Tool and compatible USB Driver as require. You can find How-to flash instruction on this page.

If…

View On WordPress

1 note · View note

iandroideu · 5 years ago

Photo

How to Install Stock ROM on Xolo Prime [Firmware Flash File/Unbrick] #AAStockROM #Xolo #XoloPrime https://t.co/MDss2eighQ http://twitter.com/iandroideu1/status/1218156327802793984

How to Install Stock ROM on Xolo Prime [Firmware Flash File/Unbrick] #AAStockROM #Xolo #XoloPrime https://t.co/MDss2eighQ

— iAndroid.eu (@iandroideu1) January 17, 2020

#android #app #mac #How to Install Stock ROM on Xolo Prime [Firmware Flash File/Unbrick] AAStockR

0 notes

clarastaylor16 · 5 years ago

Text

Download Oppo Flash Tool 2019 to flash any Android

Restore the stock firmware always recovers the majority of software related issues on Androids. If you have done trying to repair your Oppo mobile try this method as the final attempt. The mechanism calls Android flash. Once a smartphone or tab reports an error message regarding not enough memory while the device space is enough, it is the time to use Oppo Flash Tool. This is not an Application that specified only for Oppo devices. No matter whether the mobile is powered by MediaTek or Qualcomm Snapdragon, it works with both of these chipsets perfectly.

Main advantages of the Oppo Flash Tool?

Replace the existing firmware file is the main function of this application. Both MediaTek (MTK) and Qualcomm Snapdragon chipsets are compatible with this tool. Therefore, you are able to flash any kind of Android smartphone using this application. Flash stock recovery file is another advantage of the app. One time set up in the application can use for more related devices. This app can take backups from the non-volatile memory to protect sensitive data and allows us to restore previous backups. The Android flashing tool performs hard reset/ format devices in order to users’ commands.

How to Download and Install?

Direct download links already linked to oppoflashtool.website. Visit the destination and click the button to download the tool on your Windows computer. Then extract the downloaded file. Right-click on the compressed file and extract it before opening the setup file. Qualcomm Snapdragon related tool requires to open the “bin” folder to continue. Go to c:\program files\ qualcomm\QPST\bin\ to open the correct application. Click and redirect your browser to download Oppo flash tool.

Requirements for the installation

The android mobile flashing tool works only with Windows computers. Therefore, you have to use a Windows installed pc.

Download the corresponding firmware for your smartphone. In this step, you can use a custom firmware that matching with the device model number.

Install the latest USB driver package before connecting the smartphone to the computer.

An originally sent USB data cable is the next requirement. Charge your mobile completely and take a backup.

How to flash an Android?

Start the Android flash process gathering all requirements and enabling USB Debugging mode on your smartphone.

Now, turn on recovery mode pressing and holding the Volume Up button and the Home button. Special key combinations are specified to activate the recovery mode on Sensors installed mobiles.

Open the installed Oppo flash tool and connect your Android device using a compatible USB data cable to the computer.

The Android flash is a mechanism that replaces the stock firmware. Therefore, you have to upload the correct stock ROM files to the tool to start the flashing process after appearing the mobile device number in the flash tool interface.

Click the download button to start the process. Wait a moment until the application displays “Done” with a green color processing bar.

This will restart the smartphone automatically. The newly updated firmware is now running the Android API.

Special points

You can download Oppo flash tool to unbrick smartphones updating the stock firmware. This works with any Android mobile device (smartphone/tablet pc). Find the correct firmware for the malfunctioned device and start flashing. Normally, stock firmware contains a high volume of data. So it might be a large file that includes about 1GB - 5 GB of data. Custom ROM installation is another benefit. If you can find the correct file, this application can replace the current stock firmware with the custom file. This is a dangerous process and no-one is responsible for the warranty.

Conclusion

Repairing an Android is a bit harder process and it needs good attention. If you upload an incorrect file, this app prevents processing for the security but In some cases, the tool uploads incorrect files. If the procedure runs replacing the stock firmware, it may brick the device automatically. Do not worry to use this tool on any Android smartphone or tablet pc. Just gather the requirements then plug and play the task. All driver packages are compatible with the Oppo flash tool.

1 note · View note

speedsiteair · 2 years ago

Text

Sp flash tool timeout error

Message: BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007) Hold both volume buttons before connecting to the PC for flashing and release once flashing begins.In SP flash tool, navigate to Options > Option > Connection > Battery.Use the latest version of SP flash tool.Meaning: SP flash tool encountered a problem moving the files to be flashed into the phone’s internal SRAM

Message: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020) This made us to research for some major errors they normally encountered and how to easily fix this errors without stress. Since Many Android Users complained of getting many errors whenever they tried to flash their bricked Android phones using sp flash tools on PC. OK with a green circle finishing signal.SP Flash Tools errors, meaning and solutions. Once the device is connected to the PC, a progress bar will start loading. The device must be closed, before connecting the PC. Exams: – MT6737M_Android_scatter.txtĬlick on Download and connect device to PC via USB cable. Open the SP FlashTools folder and turn on SP Flashtool.exe as administrator.Ĭlick Scatter-loading, browse or select Scatter file from the downloaded firmware. If you do not find your device driver, then this guide is for downloading and installing this driver.ĭownload SP Flash Tool and your phone’s firmware packĮxtract Flash Tools and Firmware Packages in Your Different Folders.

After restarting the computer, you can go forward with MediaTekĭownload and install Usb drivers for your device.

To Disable signature verification enforcement until next restart press F7.

Then the computer will restart with the startup setting screen.

Troubleshoot Advanced options Start Up settings Restart.

Click Start Manu Press Shift and restart your Computer.

Follow the location where the signature verification process is disabled. Sometimes a MediaTek driver is not allowed to install on Windows computers. Installing MediaTek USB-VCOM drivers on Windows computer. Since the Sp flash tool is scatter-based, it always check whether the firmware file has scatter files.ĭirect links for Latest SP Flash Tool Download

With scatter files The Scatter file contains the memory structure of the device’s structure and the image file.

MediaTek USB-VCOM Driver Formwork File is going to flash you.

As the SP Flash Tool is a PC-based utility software that requires Windows Or a Linux computer (86 or 64-bit).

Examine and check the external RAM memory.

The power to flash both stock and custom ROM.

Linux and Windows computers both have the ability to work.

It is a common idea that most ranges of Chinese phones like Lava, Symphony, Infinix etc. Sp Flash Tool support Only MTK Send MediaTek based. MediaTek Mainly Chips or Cpu, MTK and MediaTek is a Taiwan-based well-known chip manufacturing company that mostly outsource their products.hence they are regarded as Fabless companies. SP Flash Tool is a computer application that basically helps you to flash the stock.Custom recover and fix some extreme cases (firmware update, flash recovery, unbrick device etc.) Sp Flash Tool supported. Let us read some valuable information for reading and your future flashing approach. Here I am going to tell you about the SP Flash tool. Hello Android users, welcome to my SP Flash Tools tutorial.

#Sp flash tool timeout error

0 notes

nahasfame · 2 years ago

Text

Msm download tool v4.0

#Msm download tool v4.0 how to#

#Msm download tool v4.0 install#

#Msm download tool v4.0 update#

#Msm download tool v4.0 android#

#Msm download tool v4.0 pro#

OEMs use them internally for bulk flashing. In some extreme cases, the secondary bootloader (SBL) is inaccessible, thus there is no way to boot into the fastboot/download mode (also known as hard brick).įortunately Qualcomm based devices come with a special boot mode controlled by the primary bootloader, dubbed as Emergency Download (EDL). However, the fastboot flashable bundles are useless when the bootloader is locked.

#Msm download tool v4.0 pro#

OnePlus 7 Pro with unlocked bootloader in download/fastboot mode These packages are immensely helpful if you can’t boot the OS and have an unlocked bootloader. In one of our previous article, we talked about a community-led project about unofficial fastboot flashable packages for the OnePlus 7 Pro. even I ended up with a bricked phone once as my cousin ‘jokingly’ pulled the USB cable. Flashing a wrong package, sudden interruption due to low battery….

#Msm download tool v4.0 update#

Today’s 9.5.6.GM21AA bugfix update in only intended for US unlocked OnePlus 7 Pro variantĪlthough tinkering with your phone can be fun, there is always a chance of unsolicited consequence. Be it rooting, TWRP or limited rollout of a bug fix update – readers can rely on us for every kind of news. Step 4: On the next page, click the Target drop-down menu and select your preferred region (EU/India/Global).Since the release of the OnePlus 7 Pro, PiunikaWeb is relentlessly presenting modding guides and tutorials about the phone. Step 3: Once the MSMDownloadTool interface is opened, from the drop-down menu, select the Other and click Next. Step 2: From the extracted folder locate and run the file MsmDownloadTool V4.0.exe

#Msm download tool v4.0 install#

Step 1: Download and install the unbrick zip file and extract it on your desktop. Keep your OnePlus 8, and Pro charged for at least 30 minutes.Disable any Antivirus software on your computer.Download And Install OnePlus 8/Pro USB drivers.ADB and Fastboot installed on your computer.OnePlus 8 MSM Download Tool OOS 10.5.3 – India.OnePlus 8 MSM Download Tool OOS 10.5.3 – Global.OnePlus 8 MSM Download Tool OOS 10.5.2 – Europe.

#Msm download tool v4.0 how to#

We will certainly show you just how to repair the hard bricked Oneplus 8 phone in this article. However, if you have a hard brick situation where the device is not entirely dead but certain features are not functioning, such as the display and the hardware buttons. If your OnePlus 8 or the Pro is soft bricked, which means you can access fast boot mode or the recovery, then you can simply flash any custom ROM or the OxygenOS through the recovery mode. How To Unbrick OnePlus 8/Pro Using MSMDownloadTool Download Unbrick Tool For OnePlus 8 Pro.How To Unbrick OnePlus 8/Pro Using MSMDownloadTool.Here you can flash a dead smartphone using a computer with the help of a USB data cable and flash the stock firmware on your device. On the other hand, there is a hard brick mode, which is a severe problem because none of the buttons on the smartphone work or the display turns on.įor unbricking a smartphone that has entered a hard-brick mode requires an EDL (Emergency Download Mode), which is an alternative for fast boot mode. There are two instances present in bricking one is called soft brick where your device doesn’t boot to the system but have access to the recovery mode and the fast boot more.

#Msm download tool v4.0 android#

For such users, we have a solution to revive your smartphone using the MSMDownload Tool that helps you unbrick OnePlus 8 and the Pro, respectively.Ī very reasonable thing in the Android smartphones is that it is easily bricked while flashing custom ROMs, many times, it happens when the vendor doesn’t match, or you have flash a ROM for a different model. Many OnePlus users love to flash new custom ROMs and custom recoveries, but on some unfortunate moments, they end up bricking their device. You get an on-going development of custom ROMs, kernels, recoveries, etc. The best part of OnePlus devices is that it has a healthy development community on various forums like XDA-Developers, OnePlus Forums, etc. OnePlus 8 and the Pro are the latest and most up-to-date flagship smartphones in 2020.

#Msm download tool v4.0

0 notes