#twitchartists

[irishwolfmother]

Its been a long rough day and I am mentally drained beyond belief. Being #disabled and #chronicallyill fucking sucks. Here's a throwback photo for now. I'm too tired,sad and sore to take new pics, butI'll be back soon Till then I'll be napping in the void. Back soon. Be soft with me wolf cubs, You're wolf mother is fragile. . . . . . #disabledlife #disabledandcute #disabledpride #catgirl #catears #disabledtwitch #twitchart #twitchgirlstreamers #irishstreamer #irishtwitchaffiliate #twitchaffiliate #twitchartist #twitchartists #selfie #makeup #hair https://www.instagram.com/p/CpRGxwioHXJ/?igshid=NGJjMDIxMWI=

[swarmm-cod]

NOW IN PROGRESS.. Monster Art & Music all day this today on Twitch. Make sure to give everyone a follow & swing by for a variety of goodies all day. I’ll be up from 2-4pm(pst) spinning some monster jams, movie soundtracks & fun samples. #dontleaveyourhouseartandmusicshow #dontleaveyourhouse #artmusicshowcase #artmusicshow #artmusicontwitch #twitchdjs #twitchartists #art #music #monsters #fun https://www.instagram.com/p/CqNvka0LBwz/?igshid=NGJjMDIxMWI=

[malikoutee]

Les vaisseaux voguent haut dans le ciel, avec lenteur. Les nuées d’oiseaux se mêlent au paisible voyage. D’ici, les bords du monde sont quasiment imperceptibles.

____________________ Toute utilisation ou reproduction est formellement interdite. Any use or reproduction is strictly forbidden.

[fireart-art-goes-deviant]

So I wasn't, a big fan of how my first wolverine fan poster came out.. I'm not sure about this one either; The other one got destroyed so I had to start wolverine all over again. But, I think it captures wolverine way better. If you have any helpful feedback let me know... Decided since both posters are done to share them both.

[scatterbrain73]

I loved this movie so much. I had to reimagine the poster. Thanks to everyone who hung out with me on stream! Watercolor, ink, and and acrylic on mounted paper, 18"×24".

[tomtomsoup]

Feel Good Inc. 

[overdoggo]

A furry art piece of a cute magenta Avali that I did for a friend ^^

[respadesign]

🔥✨ Custom Twitch Emotes – Cute Teddy Devil Bear Edition! ✨🔥 🎮 Check out these adorably mischievous teddy devil emotes made for one of our awesome streamers! 🧸😈 Perfect for adding a playful, edgy vibe to your Twitch channel. Your viewers won’t get enough of these cute yet devilish designs! 💖 What I offer: ✨ Custom emotes designed to fit your unique theme ✨ Only $5 per emote ✨ Delivered in just 1 day ✨ Ready-to-upload files 💡 How to order: 1️⃣ DM me your emote ideas or character references. 2️⃣ I’ll bring your vision to life with custom designs. 3️⃣ Upload and watch your community fall in love with them! 💬 DM now and let’s give your stream some devilish charm! 💕 November 19, 2024 at 02:03AM via Instagram https://instagr.am/p/DChhVisz3Rh/

[baesdworld]

Today I just felt like drawing some Protoman on stream. The McDonald’s colors just pop. #protoman #megaman #sega #gaming #procreate #procreatetips #clipstudiopaint #clipstudiotips #howtodraw #digitalart #artist #igartist #gamingartist #twitchartist #anime https://www.instagram.com/p/Co_hy7OrsAH/?igshid=NGJjMDIxMWI=

[rquerdo]

OOAK Kingdom Hearts Chest

Hey party people!

So a while back, I had two boxes that were from a DIY Thanksgiving kit and thought, "wouldn't it be cool to make a Kingdom Hearts Chest?" As a kid, I've always wanted one-and now that I'm old enough to buy the materials, now's the perfect opportunity. Funny yet, later on the process, I've decided that it wasn't going to be for me but for my nephew in his upcoming baby shower. I bought a lot of gifts for him so I thought this would be a cool add-on.

Here I will send you screenshots as well as my thought process/encounters; First off, materials.

I have used the following (Quantity depends on the sizing of the box):

Cardboard (I recommend stiff boards), Acrylic Paint (Warm Yellow, Blue, and Black), Door Hinges, Paint Varnish, Modeling Foam*, Foam Rolls*, fabric, Spackling, scissors, x-acto knife, plaster rolls. Sanding paper or blocks.

*I recommend using Worbla instead of both the modeling foam and foam rolls, I explain why further down.

DISCLAIMER: I'm no professional. I will be pointing out the flaws that I've encountered throughout the process-it is up to you if you want to follow along or find a better alternative.

First off, here's what we are working with. Ideally the shape is more rounded I bought about 3 to 4 stiff boards to act as my foundation. After I've placed the stiff boards down in place, I then placed some plaster rolls to hide the seams from each stiff board planks.

At this point, I figured the bottom looked weird. So I did the same process for what I've done on the top.

I'm glad that I ended up doing this because I knew the cardboard base was not going to hold for a while. I've made some supports (don't know what these would actually be called) so that I don't have to stack the stiff boards two or three times. If this was regular cardboard, I wouldn't do it since cardboard's weak when it comes to carrying weight, but luckily this held up throughout the process of making it.

Time for the speckling.

Overall, this process was overwhelming. At this point, I thought I messed up since the speckling didn't want to adhere to the chest at first. However, with lots of patience and elbow grease, I've managed to get it done! I had to do this in multiple layers since soft speckling tends to go everywhere. When it's harden, it's easier to work with.

Oh, and yes this step was very messy. Especially when it came to sanding.

Overall, the chest ended two of my sanding block's lives and created a huge mess. Please sand with caution; don't inhale the dust! I know that there are methods to reducing the dust flying everywhere (like using water), but I was afraid to do since I've never used speckling for a project before; not sure if it would affect the cure process of some sort.

Once sanded, I then made a sketch of where everything will be going and how I want the pattern to be. I knew I wanted to make my own version of the chest instead of trying to make it a carbon copy of it, so I've implemented some key parts (like the keyhole and crown), but everything else was loosely altered.

Just cutting the keyhole alone took me about 2 hours. I wanted to make sure that it was symmetrical and stayed in place nicely. I used Foam Rolls to create the trimming however I highly recommend using worbla instead. My local art store did not have any more worbla so I figured that this was another alternative. I found it difficult to work with and when gluing it in place, it would want to come out. Worbla tends to get sticky when heat is applied so glue might not even be necessary if you plan on applying a lacquer on the entire chest.

To hide the foam seams, I decided to use modeling foam. This...was another medium that I found interesting. Applying it is not as difficult but when it's exposed to air for about 10 minutes, the foam gets extremely sticky. Imagine slime without the activator, or imagine playing with a melted marshmallow. Again, it would just be easier to use worbla.

I knew I wanted the chest to open...like a chest so I got some door hinges. So the screws provided were too small for the chest so I ended up buying longer screws. Overall, I wish I had a drill to better secure the screws and bolts together, but not the worst thing ever. Still stays in place.

The paint job was fun, but difficult..my goodness...

I knew the modeling foam would stick out like a sore thumb and unlike other clay or pastes, you can't sand it. So I got my hot glue and created some texture which I think did a well-good job on hiding the foam. While contemplating about the overall design, I thought it would be cool to give the yellow a metallic, gold sheen to it. I thought it was a good move. I love how the hot glue sticks out with the gold compared to just using the yellow paints.

Oh the inside... It's a hot mess.

Instead of trying to paint, sand and use even more modeling foam. I've decided to hide this ugly mess with some fabrics that I have around from previous projects.

I've glued some gold fabric onto some felt (not necessary to be honest). and applied it on the base and the roof of the chest. I didn't have any blue fabric but I did have some shiny purple fabric. I think it works well with the gold.

(I know the base looks like silver but I guarantee you that it's gold)

After applying two layers of lacquer to prevent the paint from chipping, I'm finally done!

So happy with how this turned out! To be quite honest, this project took forever to finish. I think I spent about 15 hours on it? I know for some people, that sounds ridiculous but let me remind you that this is the first time for me and this entire project had a lot of trial and error.

I know there's a lot of flaws with it but one thing about me, I like to cherish my artwork-even if it's a hot mess.

Self Critiques:

Not use foam rolls/ modeling foam but rather worbla.

Pay more attention to how the chest looks opened and closed

Be more patient when applying the fabrics inside the chest. It looks messy in my opinion and I know I could've been more patient when cutting and folding the seam allowance.

Invest in a drill. the latch is not exactly the most secured when opening.

[novasiri]

Gonna relax, chill out, and make a reference for one of the many, MANY character of Aether Eternius on stream!

Tonight's focus? The recently revealed, Thanatos!

[kryptidcreative]

You've got mail! 📬

Prøgress pics

[swarmm-cod]

Monster Art & Music all day this Saturday on Twitch. Make sure to give everyone a follow & swing by Saturday for a variety of goodies all day. I’ll be up from 2-4pm(pst) spinning some monster jams, movie soundtracks & fun samples. #dontleaveyourhouseartandmusicshow #dontleaveyourhouse #artmusicshowcase #artmusicshow #artmusicontwitch #twitchdjs #twitchartists #art #music #monsters #fun https://www.instagram.com/p/CqGnurfvw5M/?igshid=NGJjMDIxMWI=

[thoughtknocks]

had too much fun drawing the details on this one :) #drawing #art #dailysketch #sketch #dailydrawing #sketchbook #artwork #clipstudiopaint #cartoon #illustration #artoftheday #twitchaffiliate #twitchartist #artistsupport #sketch #dailyart #titojaydraws #titojaydraws10 #artistsoninstagram #wip #nyc #nj #njartist #njarts #nycart #nycartscene (at Jersey City, New Jersey) https://www.instagram.com/p/CpHGWezsGKV/?igshid=NGJjMDIxMWI=

[fireart-art-goes-deviant]

#save deadboy detectives!!

Edwin Payne

[scatterbrain73]

The Veteran. 2023, Gouache, acrylic, and ink on Masonite.