#pyplok swage fittings

[tubemac]

Four Ways to Find the Right Non-Welded Piping System to Meet Your Requirements

Welding requires the skill for any welder. Welding introduces contaminates into the piping. If you do not like welding and you require a clean leak free piping system, there are still other options out there for you to consider. Tube-Mac non-welded piping systems is one of those options that may be the solution for your piping project. There's no need to stick with welded products when there are so many other choices available.

If you want to find the best non-welded equipment for your needs without getting into too much trouble along the way, here are some tips and tricks:

1. Identify the types of non-welded piping systems

The first step is to identify the types of non-welded piping systems available. Non-welded piping systems are used in industries such as steel, aluminum, pulp & paper, marine & offshore, automotive, chemicals, and refineries. The following are examples of some common types of non-welded piping systems available from Tube-Mac:

TMI 37-degree Flare Flange - Used to join pipes together by sliding the flare flange onto the pipe then flaring the pipe 37 degrees. Insert an O-ring face cone in one end of the pipe and flat face cone in the other end. Slide the flanges together and bolt them together to form a clean, leak-free connection.

TMI Retain Ring Flange - Used to join heavy wall pipes together bygrooving the outside of the pipe ends, slide the retain ring flange onto the pipe and snap in a retain ring into the groove. Slide the flanges forward and bolt together.

TMI PYPLOK fittings – 360 degree radially swaged fitting using a swaging to tool to swage the fitting onto the pipe. No flanges, no bolts. 

2. Understand the differences between different types of non-welded piping connection methods.

There are three (3) different types of non-welded piping connection methods, and each has its own advantages.

TMI 37-degree flare flange is commonly used for schedule 40 and 80 pipes for hydraulic and lubrication systems. The main advantage to this method is that it's quick and easy to fabricate.

TMI retain ring flange is used for heavy wall pipe such a schedule 160 and XXS pipes. Flaring is not an option for heavy wall pipes. Although it takes more time than flaring, it is much faster and cleaner than welding.

PYPLOK mechanically attached fittings can be used for a wider range of fluids and gases unlike the flange systems above. This is by far the fastest method to join steel pipe together. 

3. Compile a list of your piping needs and requirements by using Tube-Mac’s flange product catalog or PYPLOK catalog.

Both catalogs can be found online at www.tube-mac.com and www.pyplok.com

These catalogs will assist you selecting the correct flange or fittings and help identify the features you need and want in your new product.

You should consider several factors when compiling this list:

What type of fluid or gases will be passing through the pipe?

What is maximum pressure?

What is the maximum flow requirement?

It's important that you take these questions into account when searching for non-welded piping systems so that you don't end up buying something that doesn't meet all your requirements.

4. Estimate the cost of a non-welded product based on your research

A non-welded piping system is an important component of any industrial facility. It can be used for transporting fluids, gases, or steam in many different industries and applications. The cost of a non-welded product depends on its size, and type of material. The non-welded flanges fittings are more expensive than low-cost weld fittings, but the “overall installed cost” is where you will save time and money. A non-welded system can be installed, pressure tested and oil flushed in 1/10 of the time compared to a welded system.  

TMI’s non-welded connections are quick to install and eliminates the costly time and expense of welding.

No special skilled labour required vs. qualified welder.

Actual swaging time is measured in “seconds” vs. “hours” for a welded joint.

No special hot work permits

No fire watch personnel required.

No stress fatigue cracks as found in welds.

No x-ray required saves time and money.

Can be easily installed in tight confined spaces.

No off-loading of fluids or gases for emergency repairs.

No acid flush chemicals and neutralizers required.

No added cost or environmental issues regarding the disposal of chemical wastes.

Conclusion:

Now that you know what to look for in non-welded piping equipment, it's time to shop!

www.tube-mac.com and www.pyplok.com You decide.

[tubemac-blog]

Know the Beneficial Aspects of Non-Welded Piping

The non-welded piping systems offer huge cost savings together with substantial technical advantages to the users in different industries. The non-welded piping system is extremely easy, flexible and involves quick installation. Adding more to this point, the best advantage of using these types of pipes are comparatively reasonable than the welded ones. The non-welded piping can easily be prefabricated to the higher degree that results in increased installation speed further decreasing the cost. Moreover, it also ensures the quality that is best possible.

As no welding is used, therefore there is no requirement for after welding cleaning. There is also no requirement for investing in inspections of the weld like X-raying. The non-welded piping system is environment-friendly and this is for the reason that there is no requirement of acid cleaning. The flushing cost and time get decreased to a minimum because of natural cleanliness.

The non-welded piping system can make you save more due to the following reasons.

·         Lesser disruptions in production

·         Minimised maintenance and repair work

·         Reduced Flushing cost and time

·         Lower total installed system cost

·         Less time for installation  

·         Minimum down-time in creations during maintenance and repairs

·         Free from leakage issue

·         High quality

·         Safe, simple and consistent

·         Appropriate for a variety of materials  

·         Flexible and quick installation

·         Extreme cleanliness level

·         Environmentally friendly

If you also need the same for your industry work, then you can quickly search for some reliable dealer on the internet or in your local market that provides pyplok swage fittings. Well, it is always better to buy this stuff online a here you can get amazing deals and offers and save a lot of money on your acquisition.      

If your business is linked with the non-welded piping in some way, then you should go for some expert service provider for the same. These types of organisations also present high-pressure piping services for the industries to work safely. These service providers also have expert technicians who help the clients in managing variety of non-welding piping systems anywhere. It is suggested to go with some reliable and experienced service provider.            

[jacksonwillam]

Find Best Pyplok Swage Fittings and Weldless Fittings for Industry Purpose

Tube-Mac® Piping Technologies Ltd. is a global supplier of non-welded piping systems and components. The organization provides a wide range of products and services including 37º flare flange, retain ring flange, Pyplok swage Fittings®, weldless fittings, supplemental products, oil flushing or pressure testing service, project manager and many others. Read more: https://bit.ly/3ejeFST

[tubemac]

MAF (Mechanically Attached Fitting) is a new piping technology that s promised substantial improvements over other existing piping-joining technologies. This fitting is called Pyplok. It is a 360° radially swaged fitting with internal elastomeric seals. It is ideal to find a reliable piping system provider to buy MAF pipe fittings, weldless fittings, oil flushing services, and many others Visit here: https://tube-mac.com

[jacksonwillam]

Tube Mac| Mechanically Attached Fittings Suppliers

PYPLOK® is a 360° radial swage mechanically attached fitting which permanently connects pipe and tube for a leak free, cold connection and system is fast and reliable for use in new build and maintenance works. Read more: https://bit.ly/30h5fRJ

[jacksonwillam]

Benefits of Using PYPLOK Swage Fittings

PYPLOK is one of the best non-welded fitting systems that are ideally used across a high-pressure piping system. It requires less maintenance, is easy to install, and ensures higher efficiency. They're no associated gas freeing need and extra requirements for neutralization. Know more: https://bit.ly/2qUsoLq