#pb 6x6 | Explore Tumblr posts and blogs

whumpythingy · 2 years ago

Text

Whumptober 2022 | no 23: AT THE END OF THEIR ROPE

Forced to Kneel | Tied to a Table | "Hold them down"

#whumptober2022 #no.23 #at the end of their rope #forced to kneel #peaky blinders #gifs #whumpedit #pb 6x6 #aneurin barnard #held at gunpoint #whump #fear #gunpoint #single tear #on his knees #gun to head

162 notes · View notes

theworldasiveseenit · 3 years ago

Note

I see you are talking about cubing lately. What are your favorite cubes and can you share some of your times?

So for me my favorite cube is probably the 6x6 puzzle. I like the pacing of it and the feel. I have the Moyu AoShi right now. It's definitely smooth a bit on the heavy side a d slow to turn with bad corner cutting.

I don't really know all of my times, I started a little before the lockdown and there aren't comps in my area yet but the times I do know are for the 2x2 and 3x3.

2x2 I'm usually in the 7ish second range but I only started practicing it within the past 2 weeks.

3x3 my Ao5 is usually around 19.5 and my pb is 14.216.

It isn't a cube but my favorite puzzle is probably the megaminx and I'm around 2 minutes for those solves.

Here is a shot of my collection so far.

My favorite feat I have for the solves is that I've solved 5 Rubik's cubes underwater in one breath.

Also this is my leading autistic special interest so I love talking about it to anyone! But be prepared for an infodump....

#anon #cubing #speedcubing #rubiks cube

4 notes · View notes

kayawagner · 6 years ago

Text

OpenLOCK 1 inch Riser Tiles - Diamond Plate Treble Oblique Pattern (Fine) (STL Files)

Publisher: Riphaeus

This is a collection of Sci-Fi/industrial themed standard OpenLOCK floor tiles with a diamond plate surface design. It includes at least one 3D model (in STL format) for each of all 55 of the standard floor tiles shapes defined in the OpenLOCK (may 2018) standard by printablescenery.com, and multiple versions of the majority of them. Multiple version allow more flexible alignment of the tiles with the floor grid (e.g. for a triangular tile there will be a version where each of the three sides lines up with the edges of the grid squares) and to compensate for the diamond plate pattern not being fully symmetrical when rotated by providing additional versions with the pattern rotated by 90 degrees.

These riser tiles are intended to compliment OpenLOCK Floor Tiles - Diamond Plate Treble Oblique Pattern (Fine). Riser tiles facilitate constructing surfaces with multiple heights of floor within a single 'layer' construction. The narrower riser tiles can also stand in for solid walls and barriers/obstructions.

The surface Design is based on the "diamond plate" metal sheets used as anti-slip surfaces in industrial applications. There are multiple patterns of such plates and this one is based on the a more elaborate pattern with rows of treble raised 'diamonds', arranged obliquely to the plate edges and with the set of three 'diamonds' alternating in their direction in every other row.

The 3D models are designed specifically for FDM printing with PLA, in that they have a designed internal volume(s) to minimise infill and the 3D models include removable support structures where they are necessary for FDM printing so the addition of slicer generated supports will not be necessary.

The ZIP file contains 233 STL files, corresponding PGA image files and a PDF.

OpenLOCK tile identifiers, Sizes/Shape, and the number of versions of each

OpenLOCK Tile ID Description* # Versions Included A 2 by 0.5 rectangle 2 AS 2 by 0.5 rectangle (double sided) 2 BA 1.5 by 0.5 rectangle 4 C 2.5 by 0.5 rectangle 4 D 3 by 0.5 rectangle 2 DS 3 by 0.5 rectangle (double sided) 2 E 2 by 2 square 1 E+A 2.5 by 2 rectangle 2 EA 3 by 3 square 1 EC 2 by 1.5 rectangle 2 ED 1.5 by 1.5 square 2 EN 2 by 2 - L shape 2 F 2 radius quarter circle 2 FB 2.5 by 2.5 with 2 radius rounded corner 8 FC 2.5 by 2 with 2 radius rounded corner 8 FN 2 outer radius, 1 inner radius 90° arc 2 G 2.5 outer radius, 2 inner radius 90° arc 8 H 3 outer radius, 2 inner radius 90° arc 2 I 1 by 1 square 1 J 1 by 1 square (single sided) 2 IA 1 by 0.5 rectangle 2 K 2.5 by 1 rectangle 2 L 3 by 1 rectangle 2 M 4 by 1 rectangle 2 N 2 by 1 rectangle 2 O face 1.5 90° triangle 6 OA face 4 90° triangle 6 P 0.5 short side, 2 between short sides 18 PA 10 PB 6 PB-MIR mirror of PB 6 PD 6 PC-MIR mirror of PC 6 Q 4 by 0.5 rectangle 2 QA 5 by 0.5 rectangle 2 QC 4.5 by 0.5 rectangle 4 R 4 by 2 rectangle 2 S 2 by 1 rectangle 2 SA 3 by 1 rectangle 2 SB 4 by 1 rectangle 2 T 4 by 4 with 2 radius cut-out corner 2 U 4 by 4 square 1 V 4 radius quarter circle 2 VE 4 outer radius, 2 inner radius 90° arc 2 VG 2 outer radius, 1.5 inner radius 90° arc 2 VN 4 outer radius, 3 inner radius 90° arc 2 W 4 by 4 with 4 radius cut-out corner 2 X 4.5 outer radius, 4 inner radius 90° arc 2 XA 4.5 outer radius, 4 inner radius 45° arc 8 XG 4 outer radius, 2.5 inner radius 90° arc 2 Y face 4 45° triangle 12 YA face 2 45° triangle 8 Z 0.5 edge for Y 12 ZA 0.5 edge for YA 8 6x6 6 by 6 square 1 GA** 2.5 outer radius, 2 inner radius 45° arc 6 WA** 4 outer radius, 3.5 inner radius 90° arc 2

* The units used in the descriptions are in floor grid squares, or 1 inch (25.4mm) units.

** GA and WA tiles were proposed for inclusion in the OpenLOCK standard but have not been included in version 8.0 (May 2018). They were included in the creation of this set of 3D models because they were under consideration at the time of development.

Note: These OpenLOCK tiles are also offered in a "Coarse" version, which has a lower density of 'diamonds' in its surface patterns. The standard floor tiles that they are intended to complement are also offered in "Fine" and "Coarse" detail size options so if these are being bought to go with a floor tiles set then it would be a good idea to verify that this is the correct corresponding riser set in terms of detail size.

Price: $12.95 OpenLOCK 1 inch Riser Tiles - Diamond Plate Treble Oblique Pattern (Fine) (STL Files) published first on https://supergalaxyrom.tumblr.com

0 notes

tophatpkmn · 8 years ago

Photo

broke my pb’s by a minute within the first few solves with these new eggs

qiyi wu hua 6x6 and yuxin 7x7

#speedcubing #cube #rubik's cube #cubing

1 note · View note

vendoluzes · 8 years ago

Photo

Livro-álbum de fotografias

Em 2015, um casal de amigos muito queridos se casou numa masía do século XVI (!) no interior da Catalunya, e meu presente de casamento foi a cobertura fotográfica e a promessa de um álbum artesanal. Fiz as fotos como gostaria que fossem feitas para mim: me muni de duas câmeras analógicas (6x6 e 35mm), filme PB e uma câmera digital profissional. Quando voltei a Porto Alegre, revelei eu mesma os filmes no laboratório do Instituto de Artes (deu alguns problemas, mas ficou charmoso), pedi a ajuda de um amigo para digitalizá-los e recentemente fiz cópias de algumas fotos (entre as minhas PB, as digitais e as de outros fotógrafos-convidados) em modo químico tradicional, medidas 13x18, 13x13 e 10x15, e montei esse álbum para os pais da noiva utilizando a encadernação conhecida como Estrutura Cruzada, que permite a união de vários cadernos e da capa sem utilizar nada de cola. Normalmente, esse tipo de encadernação não é usada para álbuns, mas eu acho ela incrivelmente elegante e, como não sou nada ortodoxa, gosto de experimentar e ver o que acontece. Parece que todxs gostaram :)

A capa foi feita a partir de um retalho de couro e o miolo em papel Canson 180g + papel vegetal. As letras são a clássicas Letraset, atualmente difíceis de conseguir, muito gentilmente doadas pelo Frantz, artista e dono da maravilhosa loja de materiais para arte Koralle.

Medida: aprox. 22x16 cm (formato paisagem) / 48 pg. / 42 fotos

#album artesanal #estrutura cruzada #encadernaçao manual #fotografia analógica #pb #album de noivos

3 notes · View notes

casuallycleverpatrol-blog · 7 years ago

Text

Young Chinese Find Leisure, Friends In Tencent Fantasy Rampage

Best fiends gameplay for nothing. Generate as many resources as you want.

A darling of literary awards, this book conveys the story of Opal Buloni, a lonesome teenager who discovers the best amazing dog wandering outside a local department store and goads her father into keeping him. Winn-Dixie and Opal become intimate as they encounter some of the unusual residents of the neighbourhood who are themselves quite lonely. This is truly a affectionate story with bags of emotion. Assuming you either already picked up this year's Horizon: Zero Dawn or just want something that's steeped in fantasy rather than sci-fi, CDProjekt Red's third Witcher should be right up your alley. As in Horizon, there's a sprawling open world, except this one is filled with monsters, magic, swordplay, bloody barons, political machinations and side quests spread across several continents. Tying it all together is Geralt of Rivia, the titular Witcher (read: monster hunter), who's equally word weary and wry. Thanks to meticulous writing and design, those side quests feel just as important as the critical path - not just filler added to stretch out the runtime. And if you want a subtle way to track how long you've played, just look at Geralt's beard: It grows in real time along your journey. So what's best? Checkered tiling is what Ultimate Game Rooms” are all about. Match the tiles up with your wall color for the ultimate effect. Whether you use 6x6, 8x8 or 12x12 tiling squares it's a checkered floor that makes your game room Ultimate”. One of the most Keno tips and tricks to understand is that this is not a game of skill. Players have virtually no control over the numbers pulled out of the bubble. The only level of control a player really has is based on his or her ability to pick the correct numbers, which is often just a matter of luck. It is good to remember that in this game the fewer numbers you select, the better your odds of winning. http://noisetrade.com/fan/bestfiendshack , Free - Review - Forum Thread - Here we have the best installment of one of the greatest gaming franchises, which received both flawless review scores and game of the year awards when it was originally released ported with complete perfection to iOS. This is a game you flat out need to buy if you even vaguely consider yourself an iOS gamer. Not only because it's such an impeccable port of an important piece of gaming history, but because we need to vote with our wallets to tell Sega (and anyone else who might be watching) that this is the quality we demand out of retro games brought to the App Store. Maybe your son will look games that are based on his favorite TV shows. Mostly, these types of titles are free. So, money is not a problem but make sure you consider the ESRB rating. You can find them online on many websites. So, you don't have to go from one shop to another.

20 more things that best fiends cheat free give to your gameplay.

This fascinating educational science site from PBS Kids introduces youngsters to the basic principles of engineering. Concepts such as gravity, force, and energy are illustrated through engaging, easy-to-follow games, offline activities, and video demonstrations. So in order to enjoy a game, you have to be able to beat it? There is not one piece of this game that can not be earned while playing. Nothing is locked behind IAP. The IAP model in this should be the only model as far as I'm concerned. Most games that come out now, even games you pay for up front, have something you can only get by dishing out more dough. PROSZĘ ZANOTOWAĆ! Najlepsze Fiends jest całkowicie darmowy mecz 3 gra logiczna. Jest do ściągnięcia za darmo i grać, ale niektóre elementy gry można kupić za prawdziwe pieniądze. Aby to wyłączyć, wyłączyć zakupów w aplikacji w ustawieniach urządzenia. All children by naturally, love to win rather than lose. When children are involved into a board game, they are persistent to play all the way through until a winner emerges from the board game. Hence, board game helps to instill many skills for children to develop, regardless of age. A friend is someone you get along well enough that you can talk to them, chat with them share a joke with them or even share a drink with them. Friends are there to improve and enjoy social life. Friends are those you communicate once in a while or every now and then depending on your mood. They might be there for a short time or a long time, but circumstances may change and affect your friendship easily. My mother would love an iPad, but she is terrified just at the idea of it. She's had a laptop for 6 years and has never used it. It's not as though she could be called 'elderly' either. She loves her handheld video games! Lovely hub, GoodLady, some great suggestions and very warmly written.

0 notes

parents-baby · 8 years ago

Text

How to make cubes Zaitseva

I want to introduce you to one of the variants producing cubes Zaitseva own hands. Instead of cardboard, as in the original cubes, I used ordinary plastic cubes in two sizes of 7x7 cm and 6x6 cm.

First fill the cubes by making an incision on each office knife. "Wooden" I was filled with cubes pieces of cardboard: 6 pcs. In a large cube, 4 pcs. - In a little; "Iron" - 10-penny coins to 6 and 4 pcs.

Respectively.

Then pasted cubes holographic paper: gold or silver, depending on the purpose of the cube.

Letters made of colored paper on a pre-made stencils. Zaitsev all the letters on the dice black or brown, but I did on my black consonants, vowels - red, soft and hard signs - green as in the primer, glue them on tape blocks. At the end of all the dice again plastered with tape reliability.

Here's what I got:

Below is a layout of cubes Zaitseva, which I enjoyed:

1. "A large wooden" A-0-u-s-e

2. "A small wooden" I e-th-th and

3. "Big Iron"

B-ba-bo-bu-be-blah - two dice;

The Islands of-wu-you-ve - two dice;

G-ha-ho-hoo-gee-ge;

Y-yes-to-do-de-dy;

3-For-zo-za-zu-ze;

A-la-lo-lu-le-ly;

M-ma-mo-mu-WE-ME - two dice;

N-to-but-well-ne-us;

F-ra-ro-ru-ra-pe.

4. "Big double iron"

F-zh-zhё- Ms Jo Ms. Mrs. same, fused from the two blocks that way. What's the big planes formed units are located in different writing, but equally pronounced w and zh, and as Joe.

5. "Little Railways"

B-os-byô-bu-bi-be;

BL-ve-vё vu-ve-ve;

Tb-rn-kyo-gyu-gi-ge;

How to Make a Paper Cube

youtube

Dk-AH du-de di de - two dice;

Sb-Gia-sewing-sic-zi-se;

Ak-la-le-lu-le Do;

ML-name-myo-mu-mi-me;

Hb-nya-Nyo-nu-no-no;

Pb convent-Ryu Ryo-ri-D.

How to Make a Siamese Cube Mod

youtube

6. "The Little Iron whole" th-th-th-th-th-th

7. "Large wooden"

U-pa-on-poo-Py-Peh - two dice;

F-fa-fo-fu Oscilloscopes Fe;

K-ka-ko-ku-ke Que - two dice;

T-ta-the-the-you-te;

C-sa-to-sous-Si-Se;

X-ha-ho-hoo-ho-XLI.

8. "large double wooden"

W-wb-sha-shё-sho-shu-shi-above;

C-tsa-tso-zu-chi-tzu-tse.

9. "Little Wood"

Nk-Fr Sa-Pe-UR-pi-pe;

F-fya-feu-FY-fi fe;

KL QW-kyo-ku-ki-ke;

Tb-cha-Cho-Chu-ti-te - two dice;

Cb-Xia-sho-oo-si-se;

Xb-xn-Hyo-w-hee-hee.

10. "Small double wooden"

B-Grigorievich-cha-Che-Cho-Chu-chi-Th;

Sch-sch-conductive-schё-scho-CB-soup-School.

11. "A large wooden train" b-unto-d-z-mh-ting with two coins and two pieces of cardboard inside.

12. "Small little white" with punctuation marks: dot, comma, question and exclamation marks, hyphen and an accent mark.

Firmly tamp cube sliced paper.

Here's how it looks on the cube

Now we calculate the cost of manufactured in such a way dice:

Sami cubes - 60 pieces. Given that some blocks need not 1 and 2-3 pcs. Price of the new cube about 30 rubles. We get 60x30 = 1800 rubles.

Holographic paper. It should be about 5 sheets. In retail sheet 70x100 cm size is 40-50 rubles. 5H50 = 250 rubles.

Colored paper - 100 rubles.

Scotch - 70 rubles.

Total 2220 rubles. Approximately 500-1000 rubles. Cheaper than the original cost cubes, which, incidentally, is also to collect himself. But the most important thing for me - it is durable plastic cubes and ease of resuscitation in the event of damage.

#make #cubes #zaitseva #cubes Zaitseva #cubes pieces #double wooden

0 notes

kayawagner · 6 years ago

Text

OpenLOCK 1 inch Riser Tiles - Diamond Plate Treble Oblique Pattern (Coarse) (STL Files)

Publisher: Riphaeus

This is a collection of Sci-Fi/industrial themed standard OpenLOCK floor tiles with a diamond plate surface design. It includes at least one 3D model (in STL format) for each of all 55 of the standard floor tiles shapes defined in the OpenLOCK (may 2018) standard by printablescenery.com, and multiple versions of the majority of them. Multiple version allow more flexible alignment of the tiles with the floor grid (e.g. for a triangular tile there will be a version where each of the three sides lines up with the edges of the grid squares) and to compensate for the diamond plate pattern not being fully symmetrical when rotated by providing additional versions with the pattern rotated by 90 degrees.

These riser tiles are intended to compliment OpenLOCK Floor Tiles - Diamond Plate Treble Oblique Pattern (Coarse). Riser tiles facilitate constructing surfaces with multiple heights of floor within a single 'layer' construction. The narrower riser tiles can also stand in for solid walls and barriers/obstructions.

The surface Design is based on the "diamond plate" metal sheets used as anti-slip surfaces in industrial applications. There are multiple patterns of such plates and this one is based on the a more elaborate pattern with rows of treble raised 'diamonds', arranged obliquely to the plate edges and with the set of three 'diamonds' alternating in their direction in every other row.

The 3D models are designed specifically for FDM printing with PLA, in that they have a designed internal volume(s) to minimise infill and the 3D models include removable support structures where they are necessary for FDM printing so the addition of slicer generated supports will not be necessary.

The ZIP file contains 233 STL files, corresponding PGA image files and a PDF.

OpenLOCK tile identifiers, Sizes/Shape, and the number of versions of each

OpenLOCK Tile ID Description* # Versions Included A 2 by 0.5 rectangle 2 AS 2 by 0.5 rectangle (double sided) 2 BA 1.5 by 0.5 rectangle 4 C 2.5 by 0.5 rectangle 4 D 3 by 0.5 rectangle 2 DS 3 by 0.5 rectangle (double sided) 2 E 2 by 2 square 1 E+A 2.5 by 2 rectangle 2 EA 3 by 3 square 1 EC 2 by 1.5 rectangle 2 ED 1.5 by 1.5 square 2 EN 2 by 2 - L shape 2 F 2 radius quarter circle 2 FB 2.5 by 2.5 with 2 radius rounded corner 8 FC 2.5 by 2 with 2 radius rounded corner 8 FN 2 outer radius, 1 inner radius 90° arc 2 G 2.5 outer radius, 2 inner radius 90° arc 8 H 3 outer radius, 2 inner radius 90° arc 2 I 1 by 1 square 1 J 1 by 1 square (single sided) 2 IA 1 by 0.5 rectangle 2 K 2.5 by 1 rectangle 2 L 3 by 1 rectangle 2 M 4 by 1 rectangle 2 N 2 by 1 rectangle 2 O face 1.5 90° triangle 6 OA face 4 90° triangle 6 P 0.5 short side, 2 between short sides 18 PA 10 PB 6 PB-MIR mirror of PB 6 PD 6 PC-MIR mirror of PC 6 Q 4 by 0.5 rectangle 2 QA 5 by 0.5 rectangle 2 QC 4.5 by 0.5 rectangle 4 R 4 by 2 rectangle 2 S 2 by 1 rectangle 2 SA 3 by 1 rectangle 2 SB 4 by 1 rectangle 2 T 4 by 4 with 2 radius cut-out corner 2 U 4 by 4 square 1 V 4 radius quarter circle 2 VE 4 outer radius, 2 inner radius 90° arc 2 VG 2 outer radius, 1.5 inner radius 90° arc 2 VN 4 outer radius, 3 inner radius 90° arc 2 W 4 by 4 with 4 radius cut-out corner 2 X 4.5 outer radius, 4 inner radius 90° arc 2 XA 4.5 outer radius, 4 inner radius 45° arc 8 XG 4 outer radius, 2.5 inner radius 90° arc 2 Y face 4 45° triangle 12 YA face 2 45° triangle 8 Z 0.5 edge for Y 12 ZA 0.5 edge for YA 8 6x6 6 by 6 square 1 GA** 2.5 outer radius, 2 inner radius 45° arc 6 WA** 4 outer radius, 3.5 inner radius 90° arc 2

* The units used in the descriptions are in floor grid squares, or 1 inch (25.4mm) units.

** GA and WA tiles were proposed for inclusion in the OpenLOCK standard but have not been included in version 8.0 (May 2018). They were included in the creation of this set of 3D models because they were under consideration at the time of development.

Note: These OpenLOCK tiles are also offered in a "Fine" version, which has a higher density of 'diamonds' in its surface patterns. The standard floor tiles that they are intended to complement are also offered in "Fine" and "Coarse" detail size options so if these are being bought to go with a floor tiles set then it would be a good idea to verify that this is the correct corresponding riser set in terms of detail size.

Price: $12.95 OpenLOCK 1 inch Riser Tiles - Diamond Plate Treble Oblique Pattern (Coarse) (STL Files) published first on https://supergalaxyrom.tumblr.com

0 notes

kayawagner · 6 years ago

Text

OpenLOCK Floor Tiles - Diamond Plate Treble Oblique Pattern (Coarse) (STL Files)

Publisher: Riphaeus

This is a collection of Sci-Fi/industrial themed standard OpenLOCK floor tiles with a diamond plate surface design. It includes at least one 3D model (in STL format) for each of all 55 of the standard floor tiles shapes defined in the OpenLOCK (may 2018) standard by printablescenery.com, and multiple versions of the majority of them. Multiple version allow more flexible alignment of the tiles with the floor grid (e.g. for a triangular tile there will be a version where each of the three sides lines up with the edges of the grid squares) and to compensate for the diamond plate pattern not being fully symmetrical when rotated by providing additional versions with the pattern rotated by 90 degrees. The surface Design is based on the "diamond plate" metal sheets used as anti-slip surfaces in industrial applications. There are multiple patterns of such plates and this one is based on the a more elaborate pattern with rows of treble raised 'diamonds', arranged obliquely to the plate edges and with the set of three 'diamonds' alternating in their direction in every other row.

The 3D models are designed specifically for FDM printing with PLA, in that they have a designed internal volume(s) to minimise infill and the 3D models include removable support structures where they are necessary for FDM printing so the addition of slicer generated supports will not be necessary. The ZIP file contains 233 STL files, corresponding PGA image files and a PDF.

OpenLOCK tile identifiers, Sizes/Shape, and the number of versions of each

OpenLOCK Tile ID Description* # Versions Included A 2 by 0.5 rectangle 2 AS 2 by 0.5 rectangle (double sided) 2 BA 1.5 by 0.5 rectangle 4 C 2.5 by 0.5 rectangle 4 D 3 by 0.5 rectangle 2 DS 3 by 0.5 rectangle (double sided) 2 E 2 by 2 square 1 E+A 2.5 by 2 rectangle 2 EA 3 by 3 square 1 EC 2 by 1.5 rectangle 2 ED 1.5 by 1.5 square 2 EN 2 by 2 - L shape 2 F 2 radius quarter circle 2 FB 2.5 by 2.5 with 2 radius rounded corner 8 FC 2.5 by 2 with 2 radius rounded corner 8 FN 2 outer radius, 1 inner radius 90° arc 2 G 2.5 outer radius, 2 inner radius 90° arc 8 H 3 outer radius, 2 inner radius 90° arc 2 I 1 by 1 square 1 J 1 by 1 square (single sided) 2 IA 1 by 0.5 rectangle 2 K 2.5 by 1 rectangle 2 L 3 by 1 rectangle 2 M 4 by 1 rectangle 2 N 2 by 1 rectangle 2 O face 1.5 90° triangle 6 OA face 4 90° triangle 6 P 0.5 short side, 2 between short sides 18 PA 10 PB 6 PB-MIR mirror of PB 6 PD 6 PC-MIR mirror of PC 6 Q 4 by 0.5 rectangle 2 QA 5 by 0.5 rectangle 2 QC 4.5 by 0.5 rectangle 4 R 4 by 2 rectangle 2 S 2 by 1 rectangle 2 SA 3 by 1 rectangle 2 SB 4 by 1 rectangle 2 T 4 by 4 with 2 radius cut-out corner 2 U 4 by 4 square 1 V 4 radius quarter circle 2 VE 4 outer radius, 2 inner radius 90° arc 2 VG 2 outer radius, 1.5 inner radius 90° arc 2 VN 4 outer radius, 3 inner radius 90° arc 2 W 4 by 4 with 4 radius cut-out corner 2 X 4.5 outer radius, 4 inner radius 90° arc 2 XA 4.5 outer radius, 4 inner radius 45° arc 8 XG 4 outer radius, 2.5 inner radius 90° arc 2 Y face 4 45° triangle 12 YA face 2 45° triangle 8 Z 0.5 edge for Y 12 ZA 0.5 edge for YA 8 6x6 6 by 6 square 1 GA** 2.5 outer radius, 2 inner radius 45° arc 6 WA** 4 outer radius, 3.5 inner radius 90° arc 2

* The units used in the descriptions are in floor grid squares, or 1 inch (25.4mm) units.

** GA and WA tiles were proposed for inclusion in the OpenLOCK standard but have not been included in version 8.0 (May 2018). They were included in the creation of this file set because they were under consideration at the time of development.

Note: These OpenLOCK tiles are also offered in a "Fine" version, which has a higher density of 'diamonds' in its surface patterns.

Price: $14.95 OpenLOCK Floor Tiles - Diamond Plate Treble Oblique Pattern (Coarse) (STL Files) published first on https://supergalaxyrom.tumblr.com

0 notes

kayawagner · 6 years ago

Text

OpenLOCK Floor Tiles - Diamond Plate Treble Oblique Pattern (Fine) (STL Files)

Publisher: Riphaeus

This is a collection of Sci-Fi/industrial themed standard OpenLOCK floor tiles with a diamond plate surface design. It includes at least one 3D model (in STL format) for each of all 55 of the standard floor tiles shapes defined in the OpenLOCK (may 2018) standard by printablescenery.com, and multiple versions of the majority of them. Multiple version allow more flexible alignment of the tiles with the floor grid (e.g. for a triangular tile there will be a version where each of the three sides lines up with the edges of the grid squares) and to compensate for the diamond plate pattern not being fully symmetrical when rotated by providing additional versions with the pattern rotated by 90 degrees. The surface Design is based on the "diamond plate" metal sheets used as anti-slip surfaces in industrial applications. There are multiple patterns of such plates and this one is based on the a more elaborate pattern with rows of treble raised 'diamonds', arranged obliquely to the plate edges and with the set of three 'diamonds' alternating in their direction in every other row.

The 3D models are designed specifically for FDM printing with PLA, in that they have a designed internal volume(s) to minimise infill and the 3D models include removable support structures where they are necessary for FDM printing so the addition of slicer generated supports will not be necessary. The ZIP file contains 233 STL files, corresponding PGA image files and a PDF.

OpenLOCK tile identifiers, Sizes/Shape, and the number of versions of each

OpenLOCK Tile ID Description* # Versions Included A 2 by 0.5 rectangle 2 AS 2 by 0.5 rectangle (double sided) 2 BA 1.5 by 0.5 rectangle 4 C 2.5 by 0.5 rectangle 4 D 3 by 0.5 rectangle 2 DS 3 by 0.5 rectangle (double sided) 2 E 2 by 2 square 1 E+A 2.5 by 2 rectangle 2 EA 3 by 3 square 1 EC 2 by 1.5 rectangle 2 ED 1.5 by 1.5 square 2 EN 2 by 2 - L shape 2 F 2 radius quarter circle 2 FB 2.5 by 2.5 with 2 radius rounded corner 8 FC 2.5 by 2 with 2 radius rounded corner 8 FN 2 outer radius, 1 inner radius 90° arc 2 G 2.5 outer radius, 2 inner radius 90° arc 8 H 3 outer radius, 2 inner radius 90° arc 2 I 1 by 1 square 1 J 1 by 1 square (single sided) 2 IA 1 by 0.5 rectangle 2 K 2.5 by 1 rectangle 2 L 3 by 1 rectangle 2 M 4 by 1 rectangle 2 N 2 by 1 rectangle 2 O face 1.5 90° triangle 6 OA face 4 90° triangle 6 P 0.5 short side, 2 between short sides 18 PA 10 PB 6 PB-MIR mirror of PB 6 PD 6 PC-MIR mirror of PC 6 Q 4 by 0.5 rectangle 2 QA 5 by 0.5 rectangle 2 QC 4.5 by 0.5 rectangle 4 R 4 by 2 rectangle 2 S 2 by 1 rectangle 2 SA 3 by 1 rectangle 2 SB 4 by 1 rectangle 2 T 4 by 4 with 2 radius cut-out corner 2 U 4 by 4 square 1 V 4 radius quarter circle 2 VE 4 outer radius, 2 inner radius 90° arc 2 VG 2 outer radius, 1.5 inner radius 90° arc 2 VN 4 outer radius, 3 inner radius 90° arc 2 W 4 by 4 with 4 radius cut-out corner 2 X 4.5 outer radius, 4 inner radius 90° arc 2 XA 4.5 outer radius, 4 inner radius 45° arc 8 XG 4 outer radius, 2.5 inner radius 90° arc 2 Y face 4 45° triangle 12 YA face 2 45° triangle 8 Z 0.5 edge for Y 12 ZA 0.5 edge for YA 8 6x6 6 by 6 square 1 GA** 2.5 outer radius, 2 inner radius 45° arc 6 WA** 4 outer radius, 3.5 inner radius 90° arc 2

* The units used in the descriptions are in floor grid squares, or 1 inch (25.4mm) units.

** GA and WA tiles were proposed for inclusion in the OpenLOCK standard but have not been included in version 8.0 (May 2018). They were included in the creation of this file set because they were under consideration at the time of development.

Note: These OpenLOCK tiles are also offered in a "Coarse" version, which has a lower density of 'diamonds' in its surface patterns.

Price: $14.95 OpenLOCK Floor Tiles - Diamond Plate Treble Oblique Pattern (Fine) (STL Files) published first on https://supergalaxyrom.tumblr.com

0 notes

kayawagner · 6 years ago

Text

OpenLOCK 2 inch Riser Tiles - Diamond Plate Double Oblique Pattern (Fine) (STL Files)

Publisher: Riphaeus

This is a collection of Sci-Fi/industrial themed standard OpenLOCK floor tiles with a diamond plate surface design. It includes at least one 3D model (in STL format) for each of all 55 of the standard floor tiles shapes defined in the OpenLOCK (may 2018) standard by printablescenery.com, and multiple versions of the majority of them. Multiple version allow more flexible alignment of the tiles with the floor grid (e.g. for a triangular tile there will be a version where each of the three sides lines up with the edges of the grid squares) and to compensate for the diamond plate pattern not being fully symmetrical when rotated by providing additional versions with the pattern rotated by 90 degrees.

These riser tiles are intended to compliment OpenLOCK Floor Tiles - Diamond Plate Double Oblique Pattern (Fine). Riser tiles facilitate constructing surfaces with multiple heights of floor within a single 'layer' construction. The narrower riser tiles can also stand in for solid walls and barriers/obstructions. The narrower riser tiles can also stand in for solid walls and barriers/obstructions. These 2 inch risers are the same height as standard OpenLOCK wall tiles.

The surface Design is based on the "diamond plate" metal sheets used as anti-slip surfaces in industrial applications. There are multiple patterns of such plates and this one is based on the a more elaborate pattern with rows of double raised 'diamonds', arranged obliquely to the plate edges and with the pairs alternating in their direction in every other row.

The 3D models are designed specifically for FDM printing with PLA, in that they have a designed internal volume(s) to minimise infill and the 3D models include removable support structures where they are necessary for FDM printing so the addition of slicer generated supports will not be necessary.

The ZIP file contains 233 STL files, corresponding PGA image files and a PDF.

OpenLOCK tile identifiers, Sizes/Shape, and the number of versions of each

OpenLOCK Tile ID Description* # Versions Included A 2 by 0.5 rectangle 2 AS 2 by 0.5 rectangle (double sided) 2 BA 1.5 by 0.5 rectangle 4 C 2.5 by 0.5 rectangle 4 D 3 by 0.5 rectangle 2 DS 3 by 0.5 rectangle (double sided) 2 E 2 by 2 square 1 E+A 2.5 by 2 rectangle 2 EA 3 by 3 square 1 EC 2 by 1.5 rectangle 2 ED 1.5 by 1.5 square 2 EN 2 by 2 - L shape 2 F 2 radius quarter circle 2 FB 2.5 by 2.5 with 2 radius rounded corner 8 FC 2.5 by 2 with 2 radius rounded corner 8 FN 2 outer radius, 1 inner radius 90° arc 2 G 2.5 outer radius, 2 inner radius 90° arc 8 H 3 outer radius, 2 inner radius 90° arc 2 I 1 by 1 square 1 J 1 by 1 square (single sided) 2 IA 1 by 0.5 rectangle 2 K 2.5 by 1 rectangle 2 L 3 by 1 rectangle 2 M 4 by 1 rectangle 2 N 2 by 1 rectangle 2 O face 1.5 90° triangle 6 OA face 4 90° triangle 6 P 0.5 short side, 2 between short sides 18 PA 10 PB 6 PB-MIR mirror of PB 6 PD 6 PC-MIR mirror of PC 6 Q 4 by 0.5 rectangle 2 QA 5 by 0.5 rectangle 2 QC 4.5 by 0.5 rectangle 4 R 4 by 2 rectangle 2 S 2 by 1 rectangle 2 SA 3 by 1 rectangle 2 SB 4 by 1 rectangle 2 T 4 by 4 with 2 radius cut-out corner 2 U 4 by 4 square 1 V 4 radius quarter circle 2 VE 4 outer radius, 2 inner radius 90° arc 2 VG 2 outer radius, 1.5 inner radius 90° arc 2 VN 4 outer radius, 3 inner radius 90° arc 2 W 4 by 4 with 4 radius cut-out corner 2 X 4.5 outer radius, 4 inner radius 90° arc 2 XA 4.5 outer radius, 4 inner radius 45° arc 8 XG 4 outer radius, 2.5 inner radius 90° arc 2 Y face 4 45° triangle 12 YA face 2 45° triangle 8 Z 0.5 edge for Y 12 ZA 0.5 edge for YA 8 6x6 6 by 6 square 1 GA** 2.5 outer radius, 2 inner radius 45° arc 6 WA** 4 outer radius, 3.5 inner radius 90° arc 2

* The units used in the descriptions are in floor grid squares, or 1 inch (25.4mm) units.

** GA and WA tiles were proposed for inclusion in the OpenLOCK standard but have not been included in version 8.0 (May 2018). They were included in the creation of this set of 3D models because they were under consideration at the time of development.

Note: These OpenLOCK tiles are also offered in a "Coarse" version, which has a lower density of 'diamonds' in its surface patterns. The standard floor tiles that they are intended to complement are also offered in "Fine" and "Coarse" detail size options so if these are being bought to go with a floor tiles set then it would be a good idea to verify that this is the correct corresponding riser set in terms of detail size.

Price: $12.95 OpenLOCK 2 inch Riser Tiles - Diamond Plate Double Oblique Pattern (Fine) (STL Files) published first on https://supergalaxyrom.tumblr.com

0 notes

kayawagner · 6 years ago

Text

OpenLOCK 2 inch Riser Tiles - Diamond Plate Single Oblique Pattern (Fine) (STL Files)

Publisher: Riphaeus

This is a collection of Sci-Fi/industrial themed standard OpenLOCK 1 inch riser tiles with a diamond plate surface design. It includes at least one 3D model (in STL format) for each of all 55 of the standard floor tiles shapes defined in the OpenLOCK (may 2018) standard by printablescenery.com, and multiple versions of the majority of them. Multiple version allow more flexible alignment of the tiles with the floor grid (e.g. for a triangular tile there will be a version where each of the three sides lines up with the edges of the grid squares) and to compensate for the diamond plate pattern not being fully symmetrical when rotated by providing additional versions with the pattern rotated by 90 degrees.

These riser tiles are intended to compliment OpenLOCK Floor Tiles - Diamond Plate Single Oblique Pattern (Fine). Riser tiles facilitate constructing surfaces with multiple heights of floor within a single 'layer' construction. The narrower riser tiles can also stand in for solid walls and barriers/obstructions. These 2 inch risers are the same height as standard OpenLOCK wall tiles.

The surface Design is based on the "diamond plate" metal sheets used as anti-slip surfaces in industrial applications. There are multiple patters of such plates and this one is based on the simplest pattern with rows of single raised 'diamonds', arranged obliquely to the plate edges and alternating in their direction in every other row.

The 3D models are designed specifically for FDM printing with PLA, in that they have a designed internal volume(s) to minimise infill and the 3D models include removable support structures where they are necessary for FDM printing so the addition of slicer generated supports will not be necessary.

The ZIP file contains 233 STL files, corresponding PGA image files and a PDF.

OpenLOCK tile identifiers, Sizes/Shape, and the number of versions of each

OpenLOCK Tile ID Description* # Versions Included A 2 by 0.5 rectangle 2 AS 2 by 0.5 rectangle (double sided) 2 BA 1.5 by 0.5 rectangle 4 C 2.5 by 0.5 rectangle 4 D 3 by 0.5 rectangle 2 DS 3 by 0.5 rectangle (double sided) 2 E 2 by 2 square 1 E+A 2.5 by 2 rectangle 2 EA 3 by 3 square 1 EC 2 by 1.5 rectangle 2 ED 1.5 by 1.5 square 2 EN 2 by 2 - L shape 2 F 2 radius quarter circle 2 FB 2.5 by 2.5 with 2 radius rounded corner 8 FC 2.5 by 2 with 2 radius rounded corner 8 FN 2 outer radius, 1 inner radius 90° arc 2 G 2.5 outer radius, 2 inner radius 90° arc 8 H 3 outer radius, 2 inner radius 90° arc 2 I 1 by 1 square 1 J 1 by 1 square (single sided) 2 IA 1 by 0.5 rectangle 2 K 2.5 by 1 rectangle 2 L 3 by 1 rectangle 2 M 4 by 1 rectangle 2 N 2 by 1 rectangle 2 O face 1.5 90° triangle 6 OA face 4 90° triangle 6 P 0.5 short side, 2 between short sides 18 PA 10 PB 6 PB-MIR mirror of PB 6 PD 6 PC-MIR mirror of PC 6 Q 4 by 0.5 rectangle 2 QA 5 by 0.5 rectangle 2 QC 4.5 by 0.5 rectangle 4 R 4 by 2 rectangle 2 S 2 by 1 rectangle 2 SA 3 by 1 rectangle 2 SB 4 by 1 rectangle 2 T 4 by 4 with 2 radius cut-out corner 2 U 4 by 4 square 1 V 4 radius quarter circle 2 VE 4 outer radius, 2 inner radius 90° arc 2 VG 2 outer radius, 1.5 inner radius 90° arc 2 VN 4 outer radius, 3 inner radius 90° arc 2 W 4 by 4 with 4 radius cut-out corner 2 X 4.5 outer radius, 4 inner radius 90° arc 2 XA 4.5 outer radius, 4 inner radius 45° arc 8 XG 4 outer radius, 2.5 inner radius 90° arc 2 Y face 4 45° triangle 12 YA face 2 45° triangle 8 Z 0.5 edge for Y 12 ZA 0.5 edge for YA 8 6x6 6 by 6 square 1 GA** 2.5 outer radius, 2 inner radius 45° arc 6 WA** 4 outer radius, 3.5 inner radius 90° arc 2

* The units used in the descriptions are in floor grid squares, or 1 inch (25.4mm) units.

** GA and WA tiles were proposed for inclusion in the OpenLOCK standard but have not been included in version 8.0 (May 2018). They were included in the creation of this file set because they were under consideration at the time of development.

Note: These OpenLOCK tiles are also offered in "Medium" and "Coarse" versions, which have different densities of 'diamonds' in their surface patterns. The standard floor tiles that they are intended to complement are also offered in "Fine", "Medium" and "Coarse" detail size options so if these are being bought to go with a floor tiles set then it would be a good idea to verify that this is the correct corresponding riser set in terms of detail size.

Price: $12.95 OpenLOCK 2 inch Riser Tiles - Diamond Plate Single Oblique Pattern (Fine) (STL Files) published first on https://supergalaxyrom.tumblr.com

0 notes

kayawagner · 6 years ago

Text

OpenLOCK 1 inch Riser Tiles - Diamond Plate Double Oblique Pattern (Coarse) (STL Files)

Publisher: Riphaeus

This is a collection of Sci-Fi/industrial themed standard OpenLOCK floor tiles with a diamond plate surface design. It includes at least one 3D model (in STL format) for each of all 55 of the standard floor tiles shapes defined in the OpenLOCK (may 2018) standard by printablescenery.com, and multiple versions of the majority of them. Multiple version allow more flexible alignment of the tiles with the floor grid (e.g. for a triangular tile there will be a version where each of the three sides lines up with the edges of the grid squares) and to compensate for the diamond plate pattern not being fully symmetrical when rotated by providing additional versions with the pattern rotated by 90 degrees.

These riser tiles are intended to compliment OpenLOCK Floor Tiles - Diamond Plate Double Oblique Pattern (Coarse). Riser tiles facilitate constructing surfaces with multiple heights of floor within a single 'layer' construction. The narrower riser tiles can also stand in for solid walls and barriers/obstructions.