#mouldsteelstockist

[viratsteelspecial-blog]

Are you looking for PLASTIC MOULD STEEL steel ? Plastic mould steels are widely used for manufacturing mould for plastic. Get in touch with us today to place your requirement!

DIN 2738 #PlasticMouldSteel, The equivalent grade P20+Ni | DIN 2738 | AISI P20+Ni …

DIN 2738 which is applicable for large & small plastic mould dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Boaster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Upsetter Blocker, forging dies, Different dies & mold for plastic products etc.

Although less expensive options such as Aluminum exist for making moulds to be used for shaping plastic, steel is most often the optimum one. It may be impose more investment to begin with but this is offset by its undoubtedly greater operational life and better finish.

Also the specialized steels that have been created for plastic moulding make for rapid process speed – for any duration it can handle more repetitions than other materials and so enhance productivity. DIN 1.2738 Steels are low Carbon consisting of Carbon between 0.35 to 0.45%

Mode of Supply:

ViratSpecialSteels is the largest stockiest and supplier of DIN 2738 steel in flat, square and round bar. We provide steel in all sizes as your requirements.

Learn more: https://www.viratsteels.com/p20ni.html

For more information Contact us: info@viratsteels.com, +91-9814021775

[viratsteelspecial-blog]

Are you looking for PLASTIC MOULD STEEL steel ? Plastic mould steels are widely used for manufacturing mould for plastic. DIN 2738 #PlasticMouldSteel, The equivalent grade P20+Ni | DIN 2738 | AISI P20+Ni

DIN 2738 which is applicable for large & small plastic mould dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Boaster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Upsetter Blocker, forging dies, Different dies & mold for plastic products etc.

Although less expensive options such as Aluminum exist for making moulds to be used for shaping plastic, steel is most often the optimum one. It may be impose more investment to begin with but this is offset by its undoubtedly greater operational life and better finish. Also the specialized steels that have been created for plastic moulding make for rapid process speed – for any duration it can handle more repetitions than other materials and so enhance productivity.

DIN 1.2738 Steels are low Carbon consisting of Carbon between 0.35 to 0.45%

Mode of Supply: Virat Special Steels are largest stockiest and supplier of DIN 2738 steel in flat, square and round bar. We provide steel in all sizes as your require

Learn more: https://www.viratsteels.com/p20ni.html For more information Contact us: info@viratsteels.com, +91-9814021775

[viratsteelspecial-blog]

Are you looking for DIN 2738 ( P20 + Ni) Steels in India ? Have you understand the advantages of using DIN 2738 Steel (P20 +Ni)?

Virat Special Steels announced as the largest stockiest of DIN 2738 ( P20 + Ni) which is supposed to be an upgraded version of the plastic mold steel 2311. Just like plastic mold steel 2311, DIN 2738 is also supplied in a pre hardened condition. The most specific use of DIN 2738 is that for the purpose of making plastic injection die molds.

Besides the fact that DIN 2738 is supplied in pre hardened condition, some of the other important characteristics of this steel are s follows:

In the state, when the same is supplied to the customers, the level of hardness of the steel is at 280-320 HB. The nickel content in the steel increases by 0.8% – 1.5% on further hardening.

This steel is micro alloyed. The best characteristic of this steel, which makes it perfect for the making of plastic injection die molds, is the fact that it is very good in machining. As a result of this, it becomes absolutely suitable for various purposes like Texturing, polishing of the outsides of various products, provides excellent corrosion resistance to the products, etc.

Other than the making of plastic injection die molds, there are many other applications of this steel. Some of those applications have been discussed below:

This steel can be used for making dies for many different industries like the automotive industry, domestic goods industry, etc.

Plastic molds of various sizes, big as well as small, can be easily made from the use of DIN 1.2738 (AISI P20).

It is useful in the manufacturing of numerous dies and products like high finishing plastic die, Boaster plates used in presses, shoe / Sow blocks and die hammers, which are used for the making of drop hammers, press cassetes, forging dies, Upsetter blockers, and various other dies and molds made for different plastic products.

This steel has a very high demand in the market for the simple reason that this modern and upgraded version of plastic mold steel 2311, offers increased alloy element, which not only increases its hardness, but it also provides extra life. Thus, the parts manufactured through the use of this steel last for a much longer duration.

At the same time, the quality of polishing that is done on this steel is also very good. The hardness present in the steel is also uniform throughout the product. Almost all Leading steel company like Virat Special Steels is Stocking and supplying this product and the demand for the same is increasing on a constant basis.

Virat Special Steels is the largest stockist and supplier of P20 + Ni and P20 tool steel in flat, square and round bars. We provide steel in all sizes as your requirements. P20 Steels is available in flat, square and round shape.

Consult our team who will assist you for the PlasticMouldSteels query.

Learn more : https://www.viratsteels.com/plastic-mould-steel.html

Any queries feel free to contact us : info@viratsteels.com or on mobile number +91-9814021775

[viratsteelspecial-blog]

Are you looking for Bright Round Bar #EN353 Steels or #AlloySteel?

Virat Special Steels is the biggest & leading Supplier & Stockiest of EN353 Steels.

EN 353 steel has carbon content material of 0.17 % & probably the most usual form of steel, because the carbon content material raises, the material becomes tougher & harder. It's observed that the hardness & wear resistance of the EN 353 steels elevated after the warmness therapy & the micro structure is exchange from ferrite to marten website.

This grade is in general used for a lot of automobiles functions comparable to heavy duty tools, shaft, pinion, cam shafts and gudgeon pins.

Steel Properties: En 353 steel has a carbon content of 0.17% and the commonest form of steel as it provides material properties that are acceptable for several automobile applications such as significant duty gear, shaft, pinion, camshafts and gudgeon pins. It’s neither outwardly brittle nor ductile due to its lower carbon content and lower hardness. Because the carbon content will increase, the metal becomes more durable and stronger.

Applications: Acceptable for many automobile applications such as heavy duty gear, shaft, pinion, camshafts, gudgeon pins. / Machining components.

The Leading Company Virat Special Steels Pvt. Ltd., is one of the largest Importer, Exporter and Stockist of Die Blocks (DIN 1.2714, #DB6, #H13, #H11), Tool Steels, Die Steels, Special Steels and Alloy Steels in various grades.

Learn more: https://www.viratsteels.com/en353.html For more information Contact us : info@viratsteels.com. +91- 9814021775

[viratsteelspecial-blog]

Are you looking for the best quality tool steel, die steel, and mold steel suppliers for your engineering work in India?

As one of India’s leading special steel suppliers, #ViratSpecialSteels can supply the following industries requirement of steel practically off-the-shelf.

Virat Special Steels Pvt. Ltd., is one of India’s top Tool Steel, Die Steel suppliers, and Mold Steel Stuckists. This company provides special steel of every kind in sizes and shapes (flat, round, or bars) per customer requirements. Based in #Gurgaon (Haryana) & #Ludhiana (Punjab) India.

Forging Industry - Forging is a process in which metal is being shaped using compressive forces with a Hammer or a press. Forging are classified into Cold forging, warm forging or hot forging. Mainly material used: Din 1.2714(DB6), DIN 1.2344(H13), DIN 1.2343(H11).

Pressure Die Casting – Die casting is performed by forcing molten metal under high pressure into a mold cavity & the cavity (mold cavity) is manufacture by using two hardened tool steel dies & perform similar to an injection mold. Mainly material used: Hot die steel i.e. DIN 1.2344(H13), DIN 1.2343(H11), and DIN 1.2581(H21).

Aluminum Extrusions - In Extrusion process material is pushed through a die to the desired cross section & in this manufacturing process it creates very complex cross section. The parts are being formed with an excellent surface finish. Mainly material used: - Hot die steels i.e. DIN 1.2344 (H13) grade.

Automotive Industry - Automotive industry are wide range of companies is mainly involved in manufacturing, design, development, of motor vehicles. Mainly material used: - Din 1.2714(DB6), DIN 40NiCrMo84(EN24), DIN 3343(M2), 16Mncr5, 20Mncr5.

Plastic industry - Polymer materials are manufactures in plastic industry and offers services to aerospace, building, construction, electronics, packaging and transportation. Mainly material used: - DIN 2738 (P20+ Ni), DIN 2311(P20).

Railways - They are involves mainly in manufacturing railways components i.e. Railway gear holder, Railway bogie cast parts, Railways axles, railways Sets of pins, Ground lever frame, adjustable crank, Compressor pistons, Compressor bearings. Mainly material used:-Din 1.2714(DB6), DIN 1.2344(H13), DIN 1.2343 (H11), DIN 40NiCrMo84(EN24), 20NiCrMo5(EN353).

Oil & Gas - Oil & Gas they supply more than 60 percent of our nation’s energy. Natural gas also helps generate the electricity that powers our daily lives.

They also have a fully equipped quality assurance and process examination facility that conducts tests such as hardness and analyses of grain structure.

Find us: Website: https://www.viratsteels.com/ Email us: info@viratsteels.com Call Us Now: +91-9814021775

[viratsteelspecial-blog]

Virat Special Steels Pvt Ltd. is one of the largest Importer, Exporter, and Stockist of Die Blocks (DIN12714, DB6, H13, H11), Tool Steels, Die Steels, Special Steels, and Alloy Steels in various grades.

The company maintains the biggest Steel Yards and holds a high level of inventory of Special Steel from the world’s leading manufacturers such as DEW, Thyssen Krupp - Germany, Vitkovice - Czech Republic, Somers Forge – England, Villares Metals - Brazil, etc.

Virat Special Steels offers specialized grades in the segments of hot worked, high speed, shock resisting, and special-purpose tool steels.

We are a leading manufacturer, stockiest, and exporter of different tool steel grades and caters to enterprising clients through customized products that are finely suited to demands.

As exporters, they compete in markets abroad with multinationals such as Buderus, DEW, SWG Groditz, Nippon, Sanyo, Gloria, BGH, Kind & Co, Swiss Steel, S&B Steel, Hitachi Steel; and so, have to better international standards of prices, quality and supply schedules.

The following grades of steel are available with them ex-stock: 1. DIE BLOCKS (DIN-1.2714) 2. PLASTIC MOULD STEELS ( P-20 / 2738) 3. CHIPPER KNIVES STEELS 4. HOT DIE STEELS (H-11,H-13 / 2343, 2344) 5. HIGH-SPEED STEELS (M-2, M-35, T-1) 6. HIGH CARBON HIGH CHROMIUM STEELS (D-2, D-3 / 2080, 2379) 7. ALLOY STEELS, EN-SERIES

Watch now: https://www.youtube.com/watch?v=ziB2pdljwec Any further queries feel free to contact us : info@viratsteels.com. or on mobile number +91-9814021775 Web Id: www.viratsteels.com

[viratsteelspecial-blog]

What type of steel is used for forging? What grade of steel is best for forging?

There are various types of steel that can be used for forging, depending on the intended use and specific properties required. However, some common types of steel used for forging are:

Carbon steel: This type of steel is made up of carbon and iron, and it is widely used for forging due to its excellent strength, toughness, and durability.

Alloy steel: This type of steel contains other elements such as nickel, chromium, and molybdenum, which make it more resistant to wear and tear, and provide greater strength and hardness than carbon steel.

Tool steel: This type of steel is specially designed for making tools, dies, and other cutting or forming instruments. It is highly wear-resistant and has excellent toughness and hardness.

When it comes to selecting the best grade of steel for forging, it depends on the specific application and desired properties. For example, for heavy-duty applications, a high-strength steel such as alloy steel may be ideal, while for a decorative item, a more malleable steel like mild steel might be preferred.

Forging is a process in which metal is being shaped using compressive forces with a Hammer or a press. Forging are classified into Cold forging, warm forging or hot forging. We maintains the ready stock biggest Steel Yards and hold a high level of inventory of #SpecialSteels from the world’s leading.

Mainly material used: DIN 1.2714(DB6): https://www.viratsteels.com/db6.html DIN 1.2344(H13): https://www.viratsteels.com/h13.html DIN 1.2343(H11): https://www.viratsteels.com/h11.html

The Leading Company VIRAT SPECIAL STEELS PVT. LTD. is one of the largest Importer, Exporter and Stockist of Die Blocks (DIN 1.2714, DB6, H13, H11), Tool Steels, Die Steels, Special Steels and Alloy Steels in various grades.

Learn more: https://www.viratsteels.com/ For more information Contact us: info@viratsteels.com, +91-9814021775

[viratsteelspecial-blog]

What is the differences between the H11 and H13 Hot Work Steel? Looking to source Hot Work Tool Steel from India?

If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance.

H13 is another popular alloy from the family of Chromium Hot Work Steels corresponding to the ASTM A681 standard. With a Carbon content that can vary from 0.32 to 0.45 percent it is also a low Carbon steel like H11 ( 2343 steel ) and the Chromium content can be in the 4.75 to 5.5 percent range. It differs from H11 principally in its Vanadium content which is at least 0.8 percent and could be as high as 1.2 percent. This, when coupled with its significant Molybdenum content of around 1.5 percent, lends great strength to the alloy while the high Chromium ensures that it does not turn soft even at relatively high temperatures.    

Compared to H11, H13 ( 2344 steel ) has less impact toughness but greater wear resistance as well as temper resistance.

As a general rule more other constituents in an allow cause the thermal conductivity to drop and while the thermal conductivity of H11 tool steel is 42.2 W/mK, the thermal conductivity of H13 tool steel is 28.6 W/mK. For applications such as stamping higher thermal conductivity may be preferred (so that cooling takes place quicker leading to shorter cycle times). For applications where such conductivity is not that important, H13 tool steel may be preferred for its longer life and greater resilience to the development of fractures.  

APPLICATIONS: Forging Dies, Punches / Dies for Extrusion on non ferrous alloys, Pressure Die Casting of Aluminium Alloys, Moulds for Thermo plastic polymer injection with high polishability. Die Inserts, Extrusion Press Tools, Forming Dies, Mandrels, Hot Shear Blades, Rolls for Hot Rolling Machines,Tools for Nuts,Screws, Bolts, Rivets, Fasteners, etc

Mode of Supply: The Prime Supplier of Hot Work Steel in India is "VIRAT SPECIAL STEELS," an ISO 9001:2008 certified company. Recognized globally as suppliers of quality steel they enjoy enviable affiliations with the leading producers of special steels and heavy engineering across the world. So their advice and solutions should prove invaluable in the choice of steel for different applications – 

such as guidance on whether H13 or H11 is better suited for your process.

Learn more: https://www.viratsteels.com/hot-work-steel.html https://www.viratsteels.com/h13.html https://www.viratsteels.com/h11.html

Email us: info@viratsteels.com Call Us Now: +91-9814021775

[viratsteelspecial-blog]

Virat Special Steels Pvt. Ltd. #ViratSpecialSteel AN ISO 9001:2008 CERTIFIED TRADING COMPANY We are committed with the continuously improvement and up gradation of our infrastructure to world class standards.

Our material stocking capacity in our 3 yards shed at different regions together is more than 3500 tons and having complete and updated infrastructure with facility of horizontal & vertical band saw cutting machines running at our different ware houses in different regions to serve the ever increasing delivery requirement of our esteemed clients.

We have our own machining shop which can help our customers with some value addition and also save their downtime with regards to raw material. Having the dedicated team strength of 50 people we can also claim to have one of the fastest responding people to the queries of our end users.

MACHINERY & EQUIPMENTS: - 27 Bimetal Horizontal & Vertical Bandsaw Machines (Cutting capacity upto 2500mm x 1100mm) - 14 Overhead lifting Cranes - Lifting capacity upto 20 Tons - Lifting Magnets = 20 Nos. – Lifting capacity upto 5 Tons - 2 Fork Lifter - Lifting capacity upto 3 Tons - Chemical & Spectro Lab - UT Testing Machine - Machining Plant - Hardness Tester

For more information visit www.viratsteels.com

Email us: info@viratsteels.com Call Us Now: +91-9814021775

[viratsteelspecial-blog]

Are you looking for PLASTIC MOULD STEEL steel ? DIN 2738 Plastic Mold Steel, The equivalent grade P20+Ni | DIN 2738 | AISI P20+Ni

DIN 2738 which is applicable for large & small plastic mold dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Boaster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Up setter Blocker, forging dies, Different dies & mold for plastic products etc.

Although less expensive options such as Aluminum exist for making molds to be used for shaping plastic, steel is most often the optimum one. It may be impose more investment to begin with but this is offset by its undoubtedly greater operational life and better finish. Also the specialized steels that have been created for plastic molding make for rapid process speed – for any duration it can handle more repetitions than other materials and so enhance productivity.

Steel properties as given below, however, have to be optimally matched to the specific application and these are:

- Degree of purity - Polishability - Uniformity of hardness and microstructure - Wear resistance - Temperature resistance - Machinability - Toughness and hardness - Thermal conductivity

DIN 1.2738 Steels are low Carbon consisting of Carbon between 0.35 to 0.45%

As #ViratSpecialSteels inform us, DIN 1.2738 tool steel is usually supplied as pre-hardened/quenched and tempered to 280 – 320 HB hardness. Still, after machining if the need arises, they can be annealed by first heating to 710°C and after the temperature gap between core and surface has narrowed to 740 °C for about 2 to 5 hours; followed by cooling slowly at the rate of 10 to 20 °C per hour to about 600 °C before further air cooling.

The Leading Company VIRAT SPECIAL STEELS PVT. LTD. is one of the largest Importer, Exporter and Stuckist of P20+Ni | DIN 2738 | AISI P20+Ni

Learn more: https://www.viratsteels.com/p20ni.html

For more information Contact us: info@viratsteels.com, +91-9814021775

[viratsteelspecial-blog]

Are you looking for the best quality HOT WORK STEEL? We have available #DIN2343 Steels and the equivalent grade #H11 , AISI H11.

As Vira Special Steels, who is one of the largest dealers in DIN 2344 grade steels world-wide inform us, this grade of steel can be supplied in a variety of shapes – such as bars which may be round, square, hexagonal and cut to convenient lengths. Or as sheets and flats. Generally supplied in annealed condition, they can also be customized for client needs.

Hardening is conducted at the slightly higher temperature of 1060°C and its duration should be 30 minutes per 25 mm of section. This should be followed by immediate quenching. Development of brittleness in the 500°C zone is not as much a problem and such steels may be tempered at the 550 – 650°C range. The soak duration while tempering must be raised to at least one hour per 25 mm of section.

VSS helps with the selection of steel most appropriate for your needs and would be happy to advise you on the optimum heat treatment for your case.

Virat Special Steels is the largest Supplier & Stockiest of H11 Steels, AISI H11 and DIN 2343 Hot Work Steel.

Learn more : https://www.viratsteels.com/din-2343.html https://www.viratsteels.com/h11.html https://www.viratsteels.com/aisi-h11.html

Any queries feel free to contact us : info@viratsteels.com or call +91 98140 21775

[viratsteelspecial-blog]

Virat Special Steels represent many top manufacturers of special steels across the world and enjoy global recognition. Besides the quality of the steel they supply, their wealth of experience and expertise in the subject provides invaluable guidance for their customers.

The origins of Virat Steels go back all the way to 1957, when Mr. D. K. Dhingra established Dhingra Enterprises as a company dealing in steel. Mr. Dhingra was not only a supplier of steel to Indian industry but also a dispenser of advice to his customers of steel.

In 1990, VIRAT SPECIAL STEELS (an ISO:9001:2008 certified company now) was launched by his son, Virat Dhingra for dealing in special steels with specific focus on the forging & casting industry in India. They have established a global presence and are leading stockists and exporters of Tool & Die Steels. With state of art machinery and infrastructure at their steel yards, they operate from Ludhiana, Pune and Chennai and Gurgaon in India supplying steel in Round, Flat or Square or specially customized shapes. VIRAT also exploring Global market successfully with its approved quality standards and best services.

Recognized globally as suppliers of quality steel they enjoy enviable affiliations with the leading producers of special steels and heavy engineering across the world. So their advice and solutions should prove invaluable in the choice of steel for different applications – such as guidance on whether H13 or H11 is better suited for your process.

Learn more... https://www.viratsteels.com/

Any further queries feel free to contact us : Email: info@viratsteels.com. or Call us: +91 98140 21775

[viratsteelspecial-blog]

Our Serving Industries (part 4) #AutomotiveIndustry Virat Special Steels Pvt. Ltd., maintains the biggest Steel Yards and hold a high level of inventory of #SpecialSteels from the world’s leading manufacturers.

Automotive Industry Automotive industry are wide range of companies is mainly involved in manufacturing, design, development, of motor vehicles.

Mainly material used: Din 1.2714(DB6), DIN 40NiCrMo84(EN24), DIN 3343(M2), 16Mncr5, 20Mncr5.

The Leading Company VIRAT SPECIAL STEELS PVT. LTD. is one of the largest Importer, Exporter and Stockist of Die Blocks (DIN 1.2714, DB6, H13, H11), Tool Steels, Die Steels, Special Steels and Alloy Steels in various grades.

Learn more: https://www.viratsteels.com/

For more information Contact us: info@viratsteels.com, +91-9814021775

[viratsteelspecial-blog]

Virat Special Steels Pvt Ltd., is one of #India’s top Tool Steel, Die Steel suppliers, and Mould Steel Stuckists. 

This company provides special steel of every kind in sizes and shapes (#flat, #round, or #bars) per customer requirements. Based in Gurgaon (Haryana) India . #SpecialSteels #ViratSpecialSteels #MakeinIndia #India #Gurgaon Virat Special Steels offer “Make In INDIA” products at competitive prices, better quality, and prompt servicing to increase & improve CPC (Cost Per Component) for their domestic customers.

As importers, Virat Special Steels fulfill any and all niche steel alloy that customers may require.

As one of India’s leading special steel suppliers, Virat Special Steels can supply the following grades of steel practically off-the-shelf.

- For  Forging - For  Pressure Die Casting - For  Extrusion - For  Automotive - For  Plastic Moulding - For  Components

The above are cut to up to 2500mm - 1100mm as per customer requirement.

Learn more: http://viratsteels.com

Any further queries feel free to contact us : Email: info@viratsteels.com or Call: +91 98140 21775

[viratsteelspecial-blog]

Are you looking for Tool and Die Steel Supplier in Rohtak Haryana?

Whether it’s tool steel, die steel, or any other steel requirement, Virat Special Steels stands out as a trusted supplier in Rohtak!

Today, Rohtak stands as a testament to industrial growth and innovation, particularly in the manufacturing and supply of tool and die steel components. The city's industrial clusters are a hive of activity, where small and medium-sized enterprises (SMEs) thrive on specialization in tool and die production. These clusters are not just local powerhouses but also vital cogs in the national supply chain, providing essential components to industries across India.

One of the best Tool & Die Steels Supplier in Rohtak city is: Virat Special Steels Pvt. Limited . This is a company that deals in all kinds of tool steel, die steel, plastic mold steel, high speed steel, and alloy steel. They provide value added services, such as material machining, cut pieces, and tailor-made material. They also offer metallurgical advice and quality assurance.

They have a state-of-the-art plant in Gurugram and Ludhiana. They also have a strong distribution network across India.

For more information, you can explore here: https://www.viratsteel.in/locations/tool-and-die-steel-supplier-in-rohtak/

Any further queries feel free to contact us : ☎ +91 98140-21775 🌐https://www.viratsteels.com/ 📬 info@viratsteels.com

[viratsteelspecial-blog]

What is D2 material used for? What is the rate of D2 material in India? Looking for HCHCR-D2 | DIN 2379 | AISI D2?

D2 tool steel is a high-carbon, high-chromium cold work steel. It is a type of tool steel, which means it is primarily used to make cutting and shaping tools such as dies, punches, and molds. D2 tool steel is known for its high wear resistance, toughness, and hardness, making it a popular choice for industrial applications that require durable and reliable tooling. It also has good dimensional stability, meaning it can maintain its shape and size even under high stress and temperature conditions. Overall, D2 tool steel is a versatile and reliable material that is widely used in the manufacturing industry.

Applications: HCHCR D2 tool steel applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting Threading Dies , stamping tools Etc.

HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition. D2 is the superior steels than D3 due to high alloys properties.

Steel Properties: D2 Steel Consolidates maximum wear resistance, great durability, exceptional front line maintenance and treating resistance. 12 % ledeburitic chromium steel. It can be nitride after special heat treatment. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thickness's up to 6 mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.

Mode of Supply: Virat Special Steels is the largest Supplier & Stockiest of HCHCR D2 in India.Consult our team who will assist you for HCHCR D2/ DIN 2379/ AISI D2 steel query.

Learn more... https://www.viratsteels.com/hchcr-d2.html

Any further queries feel free to contact us : Corporate Office, #Gurgaon Administrative Office, #Ludhiana Email: info@viratsteels.com. or Call us: 098140 21775