#launch x431 pad v

[eobdtooluk-blog]

How to Read and Write VIN by Launch X431 Tool?

Most Launch X431 Tools have a [VIN Registration] function to read and write VIN. Here take Launch X431 PAD V as an example to show how to register VIN on a 2017 Nissan XTrail T32 new ECM.

Operation guide:

Go to [Local diagnosis] menu

Select NISSAN>> NISSAN Diagnostic software (i.e. V44.76)>> Full system diagnosis>> The vehicle with 16PIN>> System Selection>> Engine>> ECM (Engine Control Module)

The state of ECM is equipped

Select Special Function>> VIN Registration

Confirm the ignition switch on and the engine stopped. Hold these conditions during the procedure

You can see three options: VIN/CHASSIS, VIN READ, and VIN WRITE.

Click [VIN READ]

Input the VIN of the vehicle. Refer to S/M for the location of the identification plate

After inputting, click “OK”, and the VIN value appears on the VIN READ line.

Click [VIN WRITE]

Input the VIN once again

After inputting, click “OK”, and the VIN value appears on the VIN WRITE line.

Click “Start”

Command succeed

Turn ignition switch off for 10 sec then ignition switch on to confirm no DTC

The VIN number has already been registered on X431 PAD5, and the value appears on the VIN/CHASSIS line.

Alright! That’s the whole process to register VIN on Launch X431 tablet.

[x431euinfo]

Launch X431 PAD V replace Toyota Alphad 2024 rear brake pad

LAUNCH X431 PAD V Elite Car Diagnostic Tools, Support Online Programming Coding, Full System Diagnosis , Active Test (Bi-Direction Control), Many Reset Service, Support J2534, DolP, CAN FD Protocols, Dual WIFI.

Here is the simple steps about X431 PAD V replace Toyota Alphad 2024 rear brake pad:

Toyota Alphad 2024 Car

Use X-431 PAD5 to enter Toyota diagnostic software and click [Common special functions]

Select [Brake Pad Replacement]

Select [Brake Pad Replacement (Operation Wizard)]

Click "OK"

Releasing to maintenance position

Release is successful. Now replace the rear brake pads. After the replacement is completed and installed, click "OK"

Locking the parking brake

Locking is successful, the rear brake pad replacement is completed, click "OK"

[obd2gate-com]

Launch vs. Autel: How to Choose Automotive Diagnostic Tool Brand?

When it comes to automotive diagnostic tools, Launch and Autel stand out as two prominent brands with a wide range of products boasting various features and price ranges.

Launch, a Chinese company established in 1992, has been a key player in the industry for decades. Their product line includes handheld scanners, diagnostic tablets, and advanced diagnostic systems. Renowned for their precision, speed, and user-friendly interfaces, Launch tools come at competitive prices with excellent customer support.

Autel, another well-established Chinese brand, specializes in diagnostic tools like handheld scanners, diagnostic tablets, and advanced diagnostic systems. What sets Autel apart are its advanced features, such as bi-directional control and programming capabilities, along with a reputation for durability and reliability.

Let’s now delve into the differences between Launch and Autel to help you make an informed decision.

1. Software Startup and Protection: Launch X431 relies on a Vehicle Communication Interface (VCI), so losing the VCI means purchasing a new one and transferring your account to it. Conversely, losing the tablet only requires buying a replacement and logging in with your username and password. For Autel, its software is tied to the tablet, meaning that losing the tablet results in the loss of all software. However, losing the VCI can be easily remedied by purchasing a new one.

2. Additional Devices: Launch allows you to add key programming, a feature not available with Autel, which requires a separate device for this purpose. If you need both scanning and key programming on your Autel device, consider opting for the IM608 Pro II.

Launch X-431 PAD VII provides the option to add a TPMS TGGUN for TPMS sensor programming, which Autel lacks. Autel users would need to purchase standalone TPMS scanners like TS501 and TS601. Note that certain Autel models like MaxiPro MP808TS and Maxicheck MX808TS come with built-in TPMS functions. Both Launch and Autel, however, support adding a borescope camera and a battery tester.

3. Key Programming: Autel surpasses Launch in this aspect, with its MaxiIM tablets (IM508, IM608 PRO II) offering superior key programming capabilities compared to MSUltra tablet.

4. TPMS Sensor Programming and Relearning: Autel excels in TPMS sensor programming and relearning functionalities, but it requires the use of Autel’s standalone TPMS scanner.

5. Price: Autel products tend to be more expensive than Launch counterparts, and Autel Update Subscription fees are higher as well. The higher price of Autel tools is often justified by their more advanced features.

6. Report Generation: Both brands provide scan reports to users. Autel Ultra, however, stands out with a cloud-based foundation that allows for easy report downloads.

7. Heavy-Duty Scanner: For heavy-duty scanning needs, Launch X431 V+ and HD III add-on prove to be better, more affordable, and user-friendly than MaxiSys CV from Autel. Autel offers the flexibility of standalone equipment purchase, with the option to add heavy modules as needed.

In conclusion, both Launch and Autel offer high-quality automotive diagnostic tools, but the choice between the two depends on your specific requirements and budget. Autel shines in advanced functionalities and key programming capabilities, while Launch provides cost-effective options for heavy-duty scanning. Consider your specific needs, preferences, and budget constraints before making a decision.

[carobd2unit]

Launch X431 Pad V Newest FAQs + Customers Review: Quality & Authenticity

This article lists the newest represented FAQs plus Customers Review on Launch X431 Pad V diagnostic scanner, expressing its Quality & Authenticity.

📷

Q1: Can PAD V scanner be used to do Air bag reset for a 2011 Ford Explorer?

A1: The airbag cannot be reset. If the airbag is damaged, you need to replace it and match it.

Q2: Will this Launch scanner do diagnostic and function tests on a 2001 ford 7.3l diesel?

A2: Yes. the heavy Duty Software can be subscribed in 2021.6. you can purchase it in the mall or contact us to get the factory price and you can directly use the heavy duty software without connectors. it works pretty well with the smart box.

Q3: Can this be used to reprogram a new ecu for a2008 bmw x3 e83?

A3: Sure! this automotive scanner supports reprogram a new ecu for a2008 bmw x3 e83. it comes with the J2534 protocol to replace the existing software / firmware in the ECU; program new ECUs.Fix the vehicle drivability, fuel efficiency, power loss, fault codes and durability issues.

Q4: With this scan tool, am i able to reprogram transmissions, ECUs, sensors, dual clutch system, fuel injection systems ?

A4: Launch x431 pad v scan tool can do ECU programming for BMW,for Benz,for Land Rover ,for VW, for Audi, for Porsche, for Nissan, for Infiniti, for Jaguar.but it varies on the car model and the year.

Q5: Will pad v be able to work on my heavy duty trucks ?

A5:he heavy Duty Software can be subscribed in 2021.6. you can purchase it in the mall or contact us to get the fatory price($399).and you can directly use the heavy duty software without connectors. it works pretty well with the smart box.

Q6: Will this diagnostic scanner reflash/ reprogram an ecm bcm?

A6: This scanner can reflash/reprogramming ECU for 9 brands.support for BMW,for Benz,for Volkswagen, for Audi, for Porsche, for Nissan, for Infiniti, for LAND ROVER, for JAGUAR.other scanner only work for Bens and the BMW.

Q7: Will this remove component protection on a 2018 Audi Q5 gateway module?

A7: Yes, it can remove component protection on a 2018 Audi Q5 gateway module.

Q8: Does it have the guide function for my Audi A4?

A8: YES! launch x431 pad v automotive scanner have the guide function.it provides step-by-step repair guidance for technicians.the function of guiding the use of the product to prevent the car setting caused by wrong operation.Compatible with VAG series vehicles(Volkswagen / Audi / Skoda / Seat etc.)

Q9: Can this program airbag modules on bmw?

A9: yes! launch x431 pad v automotive scanner can program the airbag modules on BMW.this scan tool support intelligent recognition of programming files, convenient and quick operation.Support for BMW,for Benz,for Volkswagen, for Audi, for Porsche, for Nissan, for Infiniti, for LAND ROVER, for JAGUAR.

Q10: Can PAD V perform Key fob for a 2004 Toyota Sienna?

A10: Launch x431 pad v scan tool can do key programming for 2004 Toyota Sienna, but you need to get the pin code firstly.

Q11: Does OBD1 even work on this scanner?

A11: YES! launch x431 pad v automotive scanner comes with 15 obd1 Connectors: TOYOTA-17, HONDA-3, MAZDA-17,FORD-6+1,SSANG YONG-20, CHRYSLER-6, SUBARU-9, KIA-20, DAEWOO-12 ,GEELY-22 ,GMVAZ-12, DAEWOO-12, BMW-20, BENZ-38.Universal-3 12 Cables: GAZ , OBDII-16 EXTEND CABLE , SSANG YONG-14, SUZUKI-3, AUDI-4, FIAT-3, MITSUBISHI HYUNDAI-12+16, OBD1 ADAPTOR, BENZ-14, NISSAN-14+16, DAIHUATSU-4, POWER CABLE CLIPS

Q12: Navigation system for a 2016 Ford Scape in this scanner?

A12: LAUNCH X431 PAD V scan tool can read and earse fault codes on Navigation system for a 2016 Ford escape.

Customer feedback:

1.Tony Reyes gives five-star rating: Arrived nicely packaged, this is the best tool I have ever used. This tool is well made, very professional, it does everything you need to diagnose a vehicle. The price is perfect. This is better than any snap on tool I have ever owned. Arrived very quickly. I recommend this tool to everyone and I recommend this seller, excellent service!

2.Matthew Kaufmann gives five-star rating: I like how simple this scan tool is to operate. It’s very quick and gets the job done. I do car repair for a hobby and the price doesn’t break the bank. I purchased this scan tool to do an adaptive learn on a transmission for a 2016 Ford Focus, worked flawlessly.

📷 📷

3.Estid Zecena Diaz gives five-star rating: I think this product is excellent, it is easy to use and efficient. I used it to repair my 2002 toyota camry and it made my job easier. I recommend it.

4.Justin shelby gives five-star rating: This scanner does it all. Very pleased. It is built like a tank it's a very rugged tool. I HIGHLY recommend this to anyone that needs a professional scanner especially for high end cars. Jessica gives wonderful customer service.

5.Joe gives five-star rating: Superb scanner best of best nice big screen charger station is nice fast smooth J2534 capabilities love the Topoligy breakdown of Can networks and the VCi smartbox can handle it all!

📷

More Launch X431 tools for you to check here: https://www.cardiagtool.co.uk/wholesale/brand-launch-x431/

Source:http://blog.cardiagtool.co.uk/launch-x431-pad-v-newest-faqs-customers-review-quality-authenticity/

[utihakou]

LAUNCH X431 PAD VII/ V Coding Setup Online

More info: https://www.eobdtool.co.uk/wholesale/launch-x431-pad-vii.html

[obdiishop]

Launch X431 PAD V PAD5 Full System Professional Diagnostic Tools Support Online Coding and Programming

https://www.obdii.shop/goods-113-Launch-X431-PAD-V-PAD5-Full-System-Professional-Diagnostic-Tools.html

Launch X431 PAD V 5 Highlights: 1. Global Version No IP Limitation 2. Free Update Online for 1 Year. After 1 Year it will cost $399/year 4. Realtime Remote Diagnosis Function via WiFi 5. Support Commercial Vehicle and Passenger Car diagnose, Support J2534, CAN FD, DoIP 6. 8 core 2GHz CPU; 4G RAM, 64G memory; 10.1 inch full-fitting, sunlight readable screen (Gorilla Glass) and IP65 protection. 7. Special Functions Supported: Immobilizer/ Key, Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS 8. Multi-Language: Italian English Chinese German Japanese Russian French Spanish Portuguese Polish Turkish Dutch Greek Danish Arabic Korean Persian Finnish Swedish Romanian Czech Hungarian 9. Online Programming till Year 2020: BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru 

[rankmains]

Tooltopia launch scopebox

TOOLTOPIA LAUNCH SCOPEBOX SERIES

Please contact your salesperson for bank wire instructions.Ītlas returns are subject to a 35% restocking fee & need to be authorized by a ToolTopia representative and prepaid by the buyer. ToolTopia accepts the following forms of payment:įor larger transactions, we only accept payment by Wire Transfer or ACH Payment.įor international orders, we only accept wire transfers. For a detailed FAQ page specific to Atlas products click here Payment Options is the premier provider of all Atlas lift products. Where can I find answers to my questions about Atlas Lift products? does not partner with any external sites for the purpose of promoting coupons or promotional codes. Can I Find ToolTopia Promo Codes Listed on Other Sites?

TOOLTOPIA LAUNCH SCOPEBOX SERIES

By integrating with the X-431 series scan. Featuring a new design and upgraded hardware, the LAUNCH O2-1 Scope Box is a versatile easy to use module that detects high level faults on various electrical components, such as sensors, actuators and circuits. Promotion codes are limited to one use per customer. LAUNCH O2-1 Scope Box Compatible with the X-431 PAD VII, X-431 PAD V, X-431 PAD III V2.0. Promotions are valid only during the promotional period and/or while supplies last. Promotions on Tooltopia can be found under the Promotions category. Gift certificates will be provided once the payment is complete and the Robinair item has been delivered. Gift Certificates credited from Robinair purchases are only available for designated items purchased on at MAP Price. Gift certificates and their use on the website are subject to our general Terms and Conditions and Privacy Policies. If an order exceeds the amount of the designated gift certificate amount, the difference must be paid with another accepted payment method. Gift Certificates must be used to purchase goods only, cannot be applied to other gift certificate purchases, returned, or refunded. Please have the gift certificate number available when calling to place your order. Tooltopia Gift Certificates apply to phone orders only. Lakeland, FL 33805 How do I use a Tooltopia Gift Certificate? Seller information is required to be completed on all tax exempt forms. Please consult your tax advisor before submitting an exemption certificate. If you are purchasing items for your own use, we cannot accept a resale exemption certificate.įarmers - Please note, some states do not allow agricultural exemptions for many of the items on ToolTopia. The only accepted tax exemption form for ToolTopia is a completed state-approved form, including the type of exemption you are claiming. If you qualify, please email for additional information. Notice for Use Tax in States Where ToolTopia Does Not Collect Sales Tax: How do I get tax exemption on my order? Hawaii, Kansas, Missouri, Montana, New Mexico, Oregon and Virginia. ToolTopia currently collects sales tax on purchases shipped to all states and territories except: except: The customers can choose the products according to their own requirement.Frequently asked questions Does Sales Tax apply to my purchase? Sensorbox can be connected to X-431 GDS main unit via USB data cable. Click to perform voltage test, resistance test or frequency test (This function utilizes the same hardware device as sensorbox). The Mechanic’s Shop, your home for all your Launch Tech USA Products. These signals can then be analysed by the LAUNCH Scopebox, which may reveal whether or not there are actually any faults with. Meanwhile, X-431 GDS also integrates automobile Multimeter, by which, you can perform voltage, resistance or frequency test. LAUNCH X-431 Scopebox Oscilloscope allows you transforming your LAUNCH X431 GDS and X431 PAD into a 4 channel Lab Scope, which can quickly identify, locate and isolate suspect & intermittent signals. It can transform all kinds of running parameters, such as vehicle speed, coolant temperature, engine RPM, air flow, throttle opening, etc., into the electronic signal for vehicle computer which can optimize the engine running status based on the above-mentioned parameters to keep the engine working in a prime status. It provides an optional function of 'Sensor Simulation', this function include 'DC voltage simulation', 'Fixed frequency simulation', 'Predefined waveform simulation' and 'Hand-drawing waveform simulation'. Launch X-431 X431 GDS Description: X-431 GDS is a new generation of state-of-the-art integrated vehicle diagnose product with a color LCD developed by LAUNCH.

[nextnahas]

Launch x431 cracked software

#Launch x431 cracked software how to

#Launch x431 cracked software cracked

#Launch x431 cracked software serial number

#Launch x431 cracked software software download

#Launch x431 cracked software Software Crack

#Launch x431 cracked software software download

If you are dealing in international import or export of Diagnostic Tools you can sign up for freeĪnd list your Diagnostic Tools with Automobiles & Motorcycles products and grow your business with us.įor more Diagnostic Tools suppliers you can check our listing pages or search for the desired category on Tradewheel's website. Launch X431 Crack Software Download Best Site Launch X431 Update Download Most people prefer EasyDiag 3. Tradewheel is a Business-to-Business platform that enables international traders dealing in Vehicle ToolsĪnd features more than 5461 products from 9 other categories. offers flexible prices for Diagnostic Tools variations depending on the importing country and quantity. Guangzhou Junliye Import And Export Co., Ltd.

#Launch x431 cracked software Software Crack

The price of Launch X431v Software Crack Car Diagnosis Scanner from China is based on the bulk order quantity. Launch x431V software crack car diagnosis scanner Price in China Please renew via Subscription card or update from the mall. Update your tool now and get new vehicle coverage and functionality. How to download 2017 launch x431 pro software: go to.

#Launch x431 cracked software how to

Compatibility Nokia release a new sealed today Windows. How to add new key for Honda City by Launch X431 IMMO PAD Launch Pad V/ Pad VII Diagnsotic Software Audi V28.31 Update Launch X431 Software Update in 2021.09 How to use Launch X431 PAD V and X-Prog3 to virgin Benz used ECU ME9.7 & TCU 722.9 How to Active Launch X431 Pad VII / Pad V Truck Diagnostic and Program Function How to solve Launch. Launch x431 master update keygen crack patch. Also I think no more developtment for GDS after year 2015 -2016.

#Launch x431 cracked software serial number

How to Configure the Online SCN Coding Function in Launch X431 PAD V or PAD VII when SCN Coding Menu is Missing. There is no craked software for GDS, you can only buy software foryour serial number and then you can load this soft via USB port to GDS machine. How to Perform ADAS Radar Calibration by LAUNCH X431 PAD V or PAD VII. Launch X431 Crack Software Download Best Site Launch X431 Update Download Most people prefer EasyDiag 3.0 Plus to a one-to-one kit is because when they change their car in the future, all they need to do is to buy the software for their next car instead of buying a brand new diagnostic kit. Keywords such as crack, download, serial, keygen, torrent, warez, etc. Matched product: for: 2022 New Launch X431 PAD VII PAD 7 with Smartlink C VCI Automotive Diagnostic Tool Support Online Coding and Programming.

#Launch x431 cracked software cracked

is located in China and deals exclusively in the production and export of Diagnostic Tools. The latest diagnostic software updates for LAUNCH X431 diagnostic scanners ( X431 Pad V, X431 PAD VII, X431 V Pro, X431 V+, X431 Pro Mini, X431 Pros Mini, X431 Pro3 etc). Launch x431 Diagun Last Software Cracked Last Cracked software for x431. offers premium quality Launch X431v Software Crack Car Diagnosis Scanner for B2B importers and distributors worldwide. Please let thé x431 update.exe run, then left click run, next, next and then finish.Guangzhou Junliye Import And Export Co., Ltd. Please double Ieft click your mousé over. On your désktop double left cIick the foIder x431 you created then inside youll find all the data and the manufacturers for your launch x431 update. The program dispIay the latest updatés from which yóu can select thé ones that yóu want to upgradé, you can chéck for a históry of your upgradés and also thé downloads that yóu have made. Share on Facébook Share on Twittér Please reload FoIlow Us. LAUNCH X431 iDiag Auto Diag Scanner user manual free dowmload Time.Cara Instal Crack Launch X431 PRO3 Easydiag Idiag.Cara Instal Crack Launch X431 PRO3 Easydiag Idiag.īerikut panduan instal software crack easydiag dan idiag X431 Pro3 1. Hi I have the launch.x431 iDiag users manual V1.00 - Elm327 ClubLAUNCH X431 iDiag users manual Please read this manual carefully before. EOBD2 Software X431 iDiag.cracked software for launch x431 - Digital Kaoscracked software for launch x431. Launch times431 Diagun Last Software program Cracked Final Cracked software for times431 Diagun, It will only function on times431 Diagun china Clone, Be aware: Dont try to format your credit card replace only the files in gagvehiclesxxx Rehabilitation version, After i will add english version. Launch X-431 V (X431 Pro)/X431 PRO3 V+ wifi/bluetooth full System Automotive Diagnostic scan tool is the completely substitutes X431 IV and X431 Diagun III.

[eobdtooluk-blog]

How to Activate Launch Motorcycle Software for X431 Tool?

LAUNCH Motorcycle Diagnostic Connector Kit 2.0 with Renewal Card is specially designed for the later X431 V/ V+, X431 PRO serial and X431 PAD serial tablets with V5.0 hardware to read DTCs, clear DTCs, read data stream, do actuation test and special functions for motorcycles. Follow this post to check the activation guide.

What is LAUNCH Motorcycle Diagnostic Connector Kit 2.0 with Renewal Card?

It comes with motorcycle diagnostic connector kit and software activation card. Don't need to buy motorcycle software in Mall.

Which connectors are included in the package?

1pc x Honda motorcycle 4PIN diagnostic connector, ROHS

1pc x Yamaha motorcycle-4+3+3+1+1 diagnostic cable, ROHS

1pc x Kawasaki motorcycle 4+6PIN diagnostic connector, ROHS

1pc x Suzuki motorcycle 4+6PIN diagnostic connector, ROHS

1pc x Harley motorcycle OBD16 to 4PIN diagnostic cable, RoHS

1pc x Harley motorcycle OBD16 to 6PIN diagnostic cable, RoHS

1pc x DUCATI motorcycle 4PIN diagnostic connector, RoHS

1pc x INDIAN, POLARIS, VICTORY motorcycles share 8PIN diagnostic connector, RoHS

1pc x EURO5 motorcycle 6PIN diagnostic connector, RoHS

Note: More Euro V and VI motor adapters will be available soon.

Which Launch tool is compatible with?

The following tools are supported. X431 V/V+/Pro3s+/Pro5 devices hardware needs to be V5.0 and above, the V4.0 and below are not supported.

Launch X431 PRO STAR

Launch X431 V V5.0

Launch X431 V+ V5.0

Launch PRO3S+ V5.0

Launch X431 PRO3 APEX

Launch X431 PRO3 ACE

Launch X431 PRO Elite

Launch X431 PRO5

Launch X431 PAD V

Launch X431 PAD VII

Which Motorcycle brands are supported?

Harley, Honda,Yamaha, Kawasaki, Suzuki, BMW, Ducati, Indian, Polaris, Victory.

How to Activate Motorcycle Software?

1.Purchase the LAUNCH Motorcycle Diagnostic Connector Kit 2.0 with Renewal Card from EOBDTOOL.co.uk. A 24-digit subscription renewal card PIN code will be included in the package.

2.Once you receive the package, take out the PIN code.

3.On your Launch X431 tool, go to the [Mall] section.

Select Software Store > Other Software Packages > Motor Bike Package > Subscription Renewal Card Pay.

Alternatively, go to Software Store > Motorcycle > Subscription Renewal Card Pay.

Confirm the order and select Subscription Renewal Card Pay.

Enter the 24-digit PIN code and confirm. Payment will process automatically, and the order status will update to “Paid.”

Finally, go to [Software Update] on the main menu, select all motorcycle software, and update. Wait for the installation to complete.

For the detailed motorcycle function and coverage, check here:

For example:

Launch X431 PAD V LINK diagnose a Harley Davidson XL1200 Sportster

LAUNCH Motorcycle Diagnostic Connector Kit 2.0 with Renewal Card: https://www.eobdtool.co.uk/wholesale/launch-motorcycle-diagnostic-connectors.html

[x431euinfo]

How to find IMMO icon in Launch X431 PRO5 Mall?

Launch release 2 Years Launch IMMO Activation Service for X431 Pro3 V+ 5.0/ Pro TT/PRO3 APEX/ PRO3S+ 5.0/ Pro5/ PAD V/PAD VII + X-prog3, then with IMMO Activation, your device will work like immo plus of immo programming functions.

And we received feedback that Why can't I see the entry to add IMMO authorization on the X431 pro5 device?

Launch engineer reply:

Please update the app to newest version, then check in "Mall>>Use Renewal card"

[cassieautoobdii]

Launch GIII X-Prog 3 Advanced Immobilizer & Key Programmer for X431 V, X431 V+, ProS, X431 PAD V, PAD VII

#launch #launchxprog3 #xprog3 #keyprogrammer #carkeyprogrammer #autokeyprogammer

whatsapp:+8615886576826

[carobd2unit]

Launch X431 PAD V: Steering Angle Calibration Test on BMW 528I F10

Launch X431 PAD V diagnostic scanner inherits Launch’s many advantages in car fault diagnostic technologies, and diagnoses the passenger and heavy duty vehicles (software and adapters are optional) with one single dongle.

This article will explain in detail how we perform Steering Angle Calibration Test on BMW 528I F10 with PAD V scanner.

This is the Launch X431 PAD V diagnostic scanner that we are gonna use and the car that is being tested.

📷

This is the dashboard of the car and marked “Steering Drive moderately.”

📷

Tap “Local Diagnose���>> Check “Vehicle Version Information”

📷 📷

After communicating, the information is shown like this:

📷

It will begin “Automatically Search”, when completed, all the DTCs it detected will be displayed on the screen.

📷 📷

We can see the diagnostic menu shown like this:

📷

Tap “Start-Up of Active Steering”>> Perform Start-up of Active Steering

After confirming for several pieces of information on the screen, it will inform you “The motor position angle is now reset”.

📷 📷 📷

Then, it asks you to “Start Steering to the left end stop”. Follow this action.

We are doing this step right now.

📷

It asks us to “Start Steering to the right end stop”.

📷

Bring the steering wheel back to the center position (wheels straight).

📷

Steering from lock to lock was successful!

📷

That is so amazing that we use Launch X431 PAD V auto diagnostics to finish the Steering Angle Calibration Test on BMW 528I F10.

If you want to know more about Launch X431 professional tools, please go to:

https://www.cardiagtool.co.uk/wholesale/brand-launch-x431/

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk Skype: cardiag.co.uk Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk Skype: cardiag.co.uk Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products

Source:http://blog.cardiagtool.co.uk/launch-x431-pad-v-steering-angle-calibration-test-on-bmw-528i-f10/

[utihakou]

Launch X431 PAD V VW PASSAT 2013 guide function DSG Transmission basic s...

More info: https://www.eobdtool.co.uk/wholesale/launch-x-431-pad-v.html

[minecart01]

LAUNCH Autool X431 HD Heavy Duty Diesel Truck Diagnostic Module Work for X431 V+, X431 Pro3,PAD II Software Free Update Online

LAUNCH Autool X431 HD Heavy Duty Diesel Truck Diagnostic Module Work for X431 V+, X431 Pro3,PAD II Software Free Update Online

Price: (as of – Details) LAUNCH X431 HD Heavy Duty Truck Diagnostic Adapter Various configurations are available for selection Suppose you are going to purchase heavy-duty truck diagnostic tool, you can choose X-431 PRO3 or X-431 PAD II as host machine. If you have already bought X-431 PRO3 or X-431 PAD II diesel configuration, now you want to test truck, just buy a heavy-duty truck module. Full…

[xingobd2]

LAUNCH X431 PAD V 10.1' Inch Full Diagnostic Tool with SmartBox 3.0 plus printer hot on sale ,Version is V7.03.005 now

https://www.ebay.com/itm/124686739209

[eobdtooluk-blog]

How to Purchase X-431 FIX (HaynesPro) on X431 PAD VII/PRO5?

Latest LAUNCH Official Guide[October 2024]:

Add X-431 FIX/HaynesPro Workshop Database to Launch X431 PAD V Elite/PAD VII Elite and X431 PRO5 SmartLink.

Users can directly purchase the X-431 FIX (HaynesPro) European Database License in the “Mall” of the above compatible Launch X431 diagnostic tools.

Price:

US$1,915+ 19% VAT

Payment:

Via Paypal

Date for processing:

The serial number on the device is required, and 3 working days are allowed for activation.

Menu function path:

Go to Mall>> Other Goods>> European Database License X-431 FIX, HaynesPro>> Buy Now

The license includes CarSET Pro (Car) 1 Year Subscription.

CarSET Pro (Car):

The new LAUNCH PRO database package includes many essential features for the workshop. The CarSET PRO database provides Instant access to a wide range of Technical Service Bulletins (TSBs), as well as links to fault codes and related case descriptions in original equipment manufacturer (OEM) quality. In addition, it includes tried-and-tested problem solutions and tips as well as guided vehicle diagnostics. The CarSET PRO database also offers wiring diagrams, installation locations and fault code information for all vehicle systems (engine management system, ABS, ESR air conditioning). The database includes all common data from European and US vehicle manufacturers and is continuously being further developed.

Note: The X431 FIX function is not available for trial before purchase.

Learn more info about LAUNCH X431 FIX function:

What’s X431 Fix?

Which Launch tool can support X431 Fix function?

How to enter X431 Fix function?

How to get X431 Fix login account?

How to quickly get help from X431 Fix function?

The LAUNCH European SGW Function License is also can be purchased in the “Mall” of X431 PAD V/PAD VII and PRO5 SmartLink diagnostic tablets directly.