#i’m adding a bunch of their stuff to my tabs list cause it seems like they dabble a lot in religious based trauma and some horror

[emptyrainbowz]

Read a phanfic about Dan with religious trauma and I literally cried. What am I doing with my life.

[bensonstablers]

Hi Queen❤️ Can you make a ‘What we know (or think we know) so far about season 3’ post ?! There’s so much info and it’s so unorganized in my brain. Help 🥺💋

Hi, there!

Let me start by saying that I mostly kept this to information we’ve been given and tried to stay away from too many theories because this post got long. Because of that, I’m actually going to put everything I can find under a read more/keep reading tab. (Although that being said, I’m always happy to answer asks about theories, I just wanted to keep this post from becoming a ridiculous length).

There’s actually been a ton of information about Good Girls season 3 so far (albeit, some of it vague haha) so I’m sure I’ve missed some things. Saying that, I recommend checking out @pynkhues‘ blog (which I’m sure you have), particularly this tag for extra details and discussions as well as info I might have missed (I find Sophie often posts about, reblogs, or is sent asks regarding details of season 3 quite regularly, ha).

The Good Girls tag on here is also great to check out as well as any official social media accounts for the show as well as cast and crew. To be honest, a lot of behind the scenes stuff is posted to IG stories which delete after 24 hours and I find they’re not always captured in time to find elsewhere. 

Anyway, everything below is split into sections and there are sources provided (said sources will potentially give extra information on top of what I’ve put!) I really hope this is organised enough for you and it’s not everything but I hope it’s what you were looking for! ^_^

Firstly, there’s this spoiler post that was made but if you don’t like spoilers and just want ‘official’ information that is announced on socials and through blog articles, I’d recommend skipping it :)

The basics:

We got an official release date: February 16th 2020 (source)

We’re getting 16 episodes this season (source)

Saying that, they’re potentially filming right through till March (source). As of right now, we’ve definitely got about 7 episodes done in terms of table reads (and filming too I think?).

We got the titles for the first 3 episodes (source) and due to IG stories we know episode 7 is called, “Vegas, Baby!”

Information about previous cast members (not including the obvious, ha):

Basically every kid on the show has been photographed on set including David Miranda who plays Marcus (a lot of the kids have instagram and you’ll see a ton of sources there).

It’s possible Jessica Walter will be back as Judith (source)

Sally Pressman is back as Nancy (source)

I don’t think it’s been confirmed if Zach Gilford is back as Greg but if Nancy is back, I’m assuming he’ll at least make an appearance.

Carlos Aviles is back as one of Rio’s boys (source - he’s also posted in IG stories about it too)

Julian Grant who plays JT (the Quick Cash guy) is set to return for at least 3x01 according to IMDb (source)

Sam Huntington doesn’t seem to be coming back for season 3 (source - his thank you tweet after season 2 finished).

Allison Tolman is playing the lead in the show Emergence so probably won’t return for this season (I guess it depends on schedule but I doubt it).

New cast members:

Charlyne Yi was cast as the fourth good girl Lucy who was hinted at at the end of season 2 and was also teased in interviews with Jenna Bans (source)

Jackie Cruz was cast a Rhea (source) and while that source revealed that Rhea was going to become friends with Beth we now have information as to who else she’s connected to as well as first look pictures of both Rhea and Beth in season 3 (source - if you don’t want to be spoiled, I wouldn’t recommend checking that source)

Ione Skye was cast as Gayle who works with Dean at his new job at a hot tub store (source) and Ione has made a couple of instagram posts like this one and this one. And I also want to say she made some IG stories but they only last 24 hours so I can’t link any, ha.

Noureen Dewulf was cast as Krystal (source) - she’s also posted a few IG stories in the past which confirmed her character’s name and also showed her on set with various people but mainly Reno Wilson bringing about the idea that Krystal will be connected to stan.

Wesley Kimmel was cast as Tim (source) and there’s really no information about him that I’ve noticed but he’s often seen with the other kids in photos (mainly the Bolands) and a lot of people have pointed out he looks like Matthew Lillard so there’s speculation he’ll be connected to them (the other theory is that he’s Gayle’s son).

Brent Jeremiah was cast a Thug #2 lmao (source) but the interesting thing is that he actually mentioned working with Christina which means this ‘thug’ is likely connected to Beth’s journey into crime (whether that be good or bad remains to be seen though).

There was also an IG post about Alex Jayne Go on set or something but I can’t seem to find it, however, she’s listed as ‘Fiona’ in 3x03 on IMDb (source)

Naomi Grossman was cast as Dr Amanda Johnson (source) and her role is only a guest one so I’m not entirely sure how much we’ll see of her.

Megan Thee Stallion has been cast to appear although there’s not really any information on who she’ll be playing and whatnot (source)

Some behind the scenes stuff:

I don’t actually follow him but I’ve heard that Gabe Rodriguez who works on Good Girls often posts a bunch of behind the scenes stuff on his instagram. - I feel like it was him who posted a picture of a strip club or something which added fuel to the fire of Krystal being a stripper or something along those lines, ha.

Christina, Mae, and Retta were filming in a graveyard at one point (source) and Carlos Aviles also posted about the same set on his IG stories (source) so most likely Manny/Rio is involved in those scenes too.

There’s a printing press this season (source) and (I think) it was confirmed that Beth and co will be working with cards as part of their business (in 3x01 on IMDb there’s a listing for ‘young card customer’) and there was a photo floating around where you see the sign: “Paper Porcupine” in the background.

I’m 90% sure it was seen in slightly more HD versions of these photos which were actually some of the first we got of Manny/Rio on set, ha.

In some IG stories, Reno mentioned he couldn’t show his face because of spoilers which I’m guessing means either a) Stan is injured or b) his outfit gives something big away about his storyline.

Whenever the cast have posted pictures that show Manny onset (whether it be for table reads or filming) those posts are usually promptly deleted (like this one) meaning that the show is still trying to keep his fate ambiguous, most likely wanting to make his return a big surprise for fans who haven’t quite figured out he’s coming back.

Everleigh (Jane) and David (Marcus) are often photographed together and its probably cause they’re close in age and friends but there’s a high chance we’ll see Jane and Marcus become friends in season 3 (it also seems that Marcus will just be in this season a lot more than season 2 in general).

There’s this photo of Jackie, Christina, and Mae which could mean nothing but we know Rhea and Beth will have scenes together but, considering that photos was from September, I wonder if Annie (and Ruby) will meet Rhea pretty early on and share scenes with her, aha.

[semi-sketchy]

This is for both of you! I am SO NEW to digital artwork and I have no idea what I’m doing. I’m using FireAlpca and I was wondering if you could give me some tips and how to make my art better! Thank yo7~

Forgive me for taking so long to get to this, just asks like this take a lot of time to put answers together for.

Seeing as you’re using FireAlpaca, this’ll be somewhat easier. So, I’m going to assume you’ve got a drawing tablet and have it set up in a way you like. If you’re using a mouse, then godspeed.

I also went into a lot more than I thought I would with many pictures, so I’m going to put this below a read more.

First, let’s go over a few basics.

Canvas size. I’ve seen it and done it myself, so let me tell you, you want a large canvas. That’s the resolution I use, I like to have something that’s 16:9, but the aspect ratio is up to you. Extra large canvases can also cause FireAlpaca to lag, so keep that in mind before you do a 10,000x10,000 canvas. Find something that’s at least over 1,500x1,000 that your computer can handle. It’s a lot easier to shrink something down than to blow it up and you can always crop out extra space at the end. If you noticed you drew the sketch small, I recommend blowing it up some before lining so you have more room for details and so if you upgrade your monitor in the next few years, your old artwork won’t look pixelated.

Correction/stabilization. You’ve probably heard many people talk about this already and are using it, so I’ll keep it brief. It uses some digital tech to make your pen movements seem more fluid and flow better. Find the number that feels right to you and adjust it as need be. As you can see I keep mine pretty high, so here’s a quick example of the same drawing with different stabilization settings.

…I somehow got progressively worse each time. Well, the important thing is you can see the smoothness of the lines and how they flow better, so that’s what matters. Now onto the next topic.

The brush tab. FireAlpaca is widely used and that means it has a huge community that makes custom brushes. Some people find this confusing, so I’ll try my best to walk you through installing custom brushes.

First, you want the actual brush. I recommend looking through DragonLoreStudios’ brush packs as most of the ones I use are from them. Some cost points, but there are a few free packs. (Pack 6 has a water texture which I freaking love.) You’ll need to keep those files, so I recommend making a folder on your computer where you keep all the custom brush textures.

It’ll be in a zipped folder, so you’ll need to extract it. Just right click and select “extract all” to a folder that is NOT the zipped folder (done this a few times). Now the hard part.

Click that icon, “Add Brush (Bitmap)” and select the image from your computer.

It’ll pull this up. This is the tricky part. Some brushes come with what the presets should be to make it look like it does in the preview, however not all do. You can do some tweaking if you change your mind about something or it didn’t work like you wanted it to by double-clicking on the brush in the brush tab. However, since this one is from DragonLoreStudios, there’s a preset panel I can match this to.

And that’s the end result. They update that panel once in awhile and it is time consuming to put in a bunch of brushes, but they carry over from version to version, so no need to worry about losing your custom brushes when you update.

Lastly, if you’re like me and want to organize your brushes, I introduce to you folders. I had some people ask me about this on my last stream, so it’s as simple as layers and folders. Just click the folder icon, name it, drag ‘n’ drop. Nice and easy way to keep your brushes organized.

So far, haven’t said a whole lot you didn’t know, huh? Alright, let me get into some stuff that I jumped for joy when I found out.

FireAlpaca doesn’t have a multi-select….or does it?

Yup! I didn’t find this out for a long time. If you hold shift with the wand, you can select as many areas as you want. It seems like a silly thing to get excited over and you may have already known about it, but I figured I’d point it out since my friends and I took forever to learn about it.

The blur sucks. We all know. No matter what computer you have, when you turn it up over 120 it gets so laggy you can’t hardly use it. But, those big canvases, you can’t use a dinky little 100 size blur on it. Welcome to filters.

I’ll admit, I don’t quite know what everything on that list does. HOWEVER, I do know what gaussian blur does and with the select tool, it’s amazing.

Let’s say you drew this awesome background, but you want those dots blurred however you don’t wanna sit here for 10 minutes with the manual blur tool.

It’s amazing, really. Only want one side blurred? Just use the select tool and blur that side. I wish I knew about this a year ago whenever my airbrush shading wasn’t smooth enough.

Now, the hue is also something that has saved my shading life more than once. It works just like you’d expect. Don’t like that background color? Think it needs more pop?

Simple. The other two options that I know on the filter tab are also great! Sand and cloud. Depending on how big your canvas is, it might take the computer a second to put it out, but it’s a texture that’s randomized every time you do it and here’s what they look like with black and white.

Not very interesting, huh? Well, put a color below them and turn that layer to overlay…

Wow! It adds some texture! I personally like to turn those down to about 15% opacity so it doesn’t overpower the image, but it’s nice for adding texture to your plain, otherwise straightforward, backgrounds.

So, time we take that knowledge and move to the miracle that is clipping.

Clipping is your go-to tool for shading and colored lines. I can’t believe how often I have to tell my friends “no, don’t grab the paint bucket use clipping” because clipping looks better. Always. Alright, for an example I’m gonna grab a newer piece that I already finished since I still have the project file.

Notice the clipping? I actually used more, but had to merge some layers because a clipping layer can’t clip onto another clipping layer. I’m gonna go backwards a little here and show you how helpful clipping can be.

This is without clipping. Not very nice looking, is it? I shaded with black as a base color, the lineart sticks out like a sore thumb and it lost its soft look. I actually use black a lot to shade, but only as a base color (unless I’m shading a really deep color, then black is basically my only option). After I got all the shading, I made a new layer and turned on clipping.

Now with this layer, I’m free to put color into the shading. If I did this with say a paint bucket, I would end up with spots that didn’t quite reach because of the antialising or it would expand if I turned on that on and I’d have to go over it again to clean it up. With clipping, I get clean lines and am free to change the color with ease.

The ears are a gradient, which means it’s time for some clipping ex machina mixed with the hue tab.

I made a copy of the top half of the color layer that covers the part I’m shading.

Now we got it pasted in with clipping on the ears. It matches up perfectly, of course, but there’s no shading. Time for the hue tab!

Look at that. Was able to keep the shading even with the gradient while adding a bit of hue shift to the purplish side. THAT is the power of clipping. Of course, use clipping for the lineart mixed with a bit of airbrush for the ear gradient (since the color layer ain’t on the lineart, have to color that by hand) and remembering to darken the lineart around the shaded areas, and we get this.

Sounds complicated, but it’s really simple and the result doesn’t look half bad. I’ve used clipping + hue on so many drawings and it’s saved my life.

Now, another little nifty trick is that white boarder. You don’t have to trace all the way around your piece, that would take forever. Let’s go back to our little grumpy Tara piece.

I added some color to help the boarder stick out. Now, first we wanna make a layer above the background layers, just below the color layer, and turn off the background.

Should be looking like this.

Next, we’re gonna use the wand to select outside and under the select tab, click “inverse”.

Now, it’s time to expand! It’s the button right under inverse, you can see it in the last image. How big or small you want it all depends on you and the canvas size, so play around until you’re happy with it. For this example, I’m using 7 because this is a pretty tiny canvas.

Next, we want the fill tool. Honestly this thing is so much more useful than people give it credit for.

Get the whole area and boom! That’s it. Deselect, turn your background back on and take a look!

Beautiful. The reason you don’t want to use the paint bucket is it wouldn’t get every spot. If you drew a tuft of fur or a little corner, it wouldn’t reach. This way makes it so every inch is covered. However, with fur and all, there’s a bit of a draw back and something you’ll have to fix manually.

Look how it squared those spots out, yikes. You’ll have to take your pen and round them as I did in that earlier piece with Miles.

I think this’ll be the last thing I cover and I myself am not very good at this, but I want to show you comics in FireAlpaca.

Step one: do NOT USE THE SNAP FOR THE LOVE OF GOD, PLEASE. THERE’S A BETTER WAY.

For real though, don’t do that. Make a new canvas (I wouldn’t use the comic tab, I just find it screws with all the knowledge I have and all it does is make a new canvas anyways).

Great. Next step.

We’re going to go to the layer tab and click “add panel material”.

That’ll bring this little box up. Whatever you pick is up to you and remember the undo button does exist, so choose whatever you want and click “OK”.

We got it started! That’s the easiest part done. It’ll automatically set you to the “panel divide” tool so you can get working. Drag that tool across and it’ll cut lines and if you hold shift, you can do diagonal lines.

Here’s a quick example. If you adjust the kerning and leading, you know, this stuff:

You can change how close it’ll cut the panels.

However, for some odd reason, you can’t do completely diagonal. Like if you take a square and cut from one corner to the other, it won’t work. I don’t know why, maybe they’ll change it in an update, but that’s how it is right now.It also takes a little getting used to, so mess around with it.

The great thing about doing this instead of using the snap (besides it looking better) is nothing will go above it. Even if it’s the bottom layer, you can’t go over it or erase it. However, sometimes you want a little panel overlay and this doesn’t give you many options, does it? Maybe you’d like to transform it, but you can’t because it’s a comic layer. You wanna convert it.

Under the layer tab, just click “rasterize material” and it’ll turn it into a normal layer you can use your select tool and transform stuff on. Now if only they had a way to create text boxes my life would be complete…

Oh, one last thing I wanna mention: ALWAYS save your project file. When you finish a piece, don’t just save it as a PNG and be done, save it as a MDP (FireAlpaca file) too. I can’t tell you how many times I’ve drawn something, uploaded it then realized I forgot one minor detail I wanna fix. Without the project file that contains all my layers, I’d be so screwed. Just keep the file around for maybe a week or two, at least until you know you won’t go back and edit it any time soon. Also be careful you don’t save a file as a PNG to show it to a friend, make progress, then just aimlessly click “save” because it’ll be in the format you last saved it as. I’ve had a friend do that several times and it’s terrible when that happens.

Okay this went from some help to a sales pitch. Still, when I found out about this stuff I thought it was a godsend. I might’ve just rambled on about stuff you already knew about, but I tried to cover some more obscure things you won’t find in basic YouTube tutorials. Anyways, hope this was of use to you!

-Sassy