#how to fix a stripped screw hole in metal

[articlesyoucanreadrightnow]

Mastering Repairs: A Step-by-Step Guide on How to Fix a Stripped Metal Screw Hole

Introduction

Stripped screw holes can be a frustrating challenge for DIY enthusiasts and homeowners alike. Whether caused by over-tightening or wear and tear over time, these stripped holes compromise the integrity of your furniture, fixtures, or machinery. However, with the right tools and techniques, repairing a stripped metal screw hole can be a straightforward and rewarding endeavor. In this comprehensive guide, we'll walk you through the step-by-step process of fixing a stripped metal screw hole, empowering you to tackle this common issue with confidence.

Best Article for How to Fix Stripped Screw Hole in Metal

Understanding the Problem

Identifying a Stripped Metal Screw Hole

Before diving into the repair process, it's crucial to confirm that the screw hole is indeed stripped. Common signs of a stripped screw hole include difficulty in tightening or loosening screws, visible wear and tear around the hole, or a loose or wobbly connection between components. Take the time to inspect the screw hole carefully to assess the extent of the damage and determine the appropriate repair method.

Assessing the Damage

Evaluate the severity of the stripping in the metal screw hole. Minor stripping may only require a simple repair, while more extensive damage may necessitate more involved solutions. Consider factors such as the size of the screw hole, the material of the surrounding surface, and the intended use of the repaired object. This assessment will guide your approach to fixing the stripped metal screw hole effectively.

Get The Best Review On the Homely Living Room Ideas Today.

Repairing a Stripped Metal Screw Hole

Using Toothpicks or Wooden Dowels

One of the simplest and most effective methods for repairing a stripped metal screw hole is by using toothpicks or wooden dowels. Begin by removing the screw from the stripped hole and filling the hole with toothpicks or wooden dowels coated in wood glue. Allow the glue to dry thoroughly before trimming off any excess material. Once dry, reinsert the screw into the repaired hole, and it should hold securely in place.

Inserting a Helicoil

For more severe cases of stripping, particularly in metal surfaces, inserting a helicoil may be necessary. A helicoil is a coiled metal insert designed to reinforce screw holes and restore their original strength. To install a helicoil, drill out the stripped hole to the appropriate size, tap the hole to match the helicoil thread, and insert the helicoil using a specialized tool. Once installed, the helicoil provides a durable and reliable anchor for screws.

Wait… Find Popular The Debate Over Whether Dishwashers Should Be Flush with Cabinets

Using Epoxy Putty

Epoxy putty offers another effective solution for repairing stripped metal screw holes, especially in situations where the surrounding material is too fragile for traditional methods. To use epoxy putty, mix equal parts of resin and hardener until thoroughly blended, then apply the putty to the stripped hole and shape it as needed. Allow the epoxy putty to cure completely before reinserting the screw, ensuring a strong and durable repair.

Preventative Measures and Maintenance

Preventing Future Stripping

To minimize the risk of stripped screw holes in the future, practice proper screwing techniques, including using the appropriate screwdriver size and applying consistent pressure. Avoid over-tightening screws, as this can weaken the surrounding material and lead to stripping over time. Additionally, consider using lubricants or thread sealants to reduce friction and prolong the lifespan of screw connections.

Regular Maintenance

Regular maintenance and inspection of screws and screw holes can help identify and address potential issues before they escalate into significant problems. Periodically check screws for signs of wear or loosening, and tighten them as needed to maintain a secure connection. By staying proactive with maintenance, you can extend the longevity of your furniture, fixtures, and equipment and prevent costly repairs down the line.

Stripped Metal Screw Hole Resource

DIY Repair Kits and Tools

For homeowners and DIY enthusiasts looking to tackle stripped screw holes independently, DIY repair kits and specialized tools can be valuable resources. These kits often include everything needed to repair stripped screw holes, such as helicoils, epoxy putty, drill bits, and screw extractors. Investing in quality tools and materials ensures that you have the necessary resources on hand to address stripping issues promptly and effectively.

Conclusion

Repairing a stripped metal screw hole may seem daunting at first, but with the right approach and tools, it's a manageable task that can yield satisfying results. Whether using simple solutions like toothpicks and wood glue or more advanced techniques like helicoil insertion or epoxy putty, mastering the art of screw hole repair empowers you to maintain and extend the lifespan of your belongings. By following the step-by-step guide outlined in this article and staying proactive with preventative measures, you can overcome the challenge of stripped screw holes with confidence and ease.

[analog-cafe]

I've been having a tough time fixing a persistent light leak in my Olympus PEN FV half-frame film SLR. I replaced the light seals (twice!) to no avail. The leaks presisted.

So by my brother's advice, I inserted a roll of film, advanced it a few frames, fired a shot to mark the location of the shutter and let it stand on the sunny windowsill for a day. I then opened the camera in a dark bag, extracted the film and cut the used-up strip from the canister. I then loaded it into a patterson tank and developed the film.

I did this twice as the first time I didn't load the film into a reel and inserted with a light-blocking spool properly into my Patterson tank, which exposed the entire roll. My second attempt yielded me the results I wanted.

The leak appeared clearly on the roll and I could see where it could be coming from by aligning the last shot's exposed frame to the shutter opening in the camera. But to my surprise, the leak didn't come from anywhere near the film door. Instead, it looked to be coming from somewhere in the spooling area where the camera wound the film onto from the canister.

I took the camera apart and found the leak: a missing screw from the strap lug left a hole where the light would leak through from under the top plate. The light would enter through the gaps around the shutter button, bounce around the metallic surfaces on the inside and then filter down the hole from a missing screw.

Coincidentaly, I found that screw earlier inside the bottom plate of the camera as it obstructed the film advance mechanism. I saved it and found useful days later. It's still wild to me how it dislodged and travelled though the camera to create the most annoying light leak ever.

I replaced the screw and fixed the damn leak. But before I could do that, I had to learn how to open the top plate on my PEN FV. It involved using a rubber tool to unscrew a screw without any grip whatsoever and unscrew another screw that worked in the opposite direction of most screws (thanks to this YouTube video).

I took this photo on the remainder of the donor roll, which I confirmed to have zero leaks. At last! I'm also glad to have lubricated the film advance gear for a smooth like-new performance in this sixty-year-old film camera.

And here's what the light leaks looked like before I fixed them:

[brianbrianbrain]

ID. Screenshot of Discord chat:

scratched out pfp and username, Today (Dec 25, 2023) at 5:23 PM:

Uh oh

Your front doorknob fell apart

phantomrose96, Today at 5:23 PM:

oh???

End ID.

ID. Screenshot of Discord chat continued:

phantomrose96, Today at 5:24 PM:

can i see a picture?

broken on the inside or out?

scratched out pfp and username, Today at 5:25 PM:

angled picture of hand holding a doorknob next to the hole where it was. the door is closed. keyhole is above the doorknob.

front flat picture of doorknob hole.

phantomrose96, Today at 5:25 PM:

woah

End ID.

ID. What if You But god said meme:

What if You: are nervous about leaving your cat alone for the holidays but have a trusted friend checking in on her so you hope she'll be fine.

But god said: Door knob fall off

End ID.

ID. Screenshot of blue iMessage text bubble (sent messages): Today (Dec 25, 2023) at 5:34 PM: I have a very odd favor to ask! My cat sitter just left and it seems my front door knob... fell apart? So currently the only way into my unit is through the back hall from your unit. Would it be possible if some time End ID.

ID. Screenshot of Tumblr tags from a reblog by oceanlaceagate 55 min. ago (Dec 30, 2023): #OP listen to me right now #are you listening #this happens with my front door all the time because the bar is stripped to shit #you need to tighten the screws on the knob so they are in contact with the bar #this will fix it for like #a week #the only real solution is go to home depot and get a new doorknob #you don't need to replace the plate bc i know landlords get pissy abt that #just replace the knob and bar #no longer shalll your car be an unknowing prisoner End ID.

ID. Screenshot of image of doorknob (doorknobs for both sides, key inserted into the doorknob facing viewer, bit that extends into the door between the two knobs). To its left: Tomorrow, Dec. 31. Estimated delivery. End ID.

ID from OP's alt text: Reply from eak1mouse which reads: If you are looking for the rectangular bit and doorknobs searching for spindle doorknobs brings up a lot of options on amazon. End ID.

ID. Screenshot of Amazon search for spindle doorknob with first three results displayed:

Two brown doorknobs and a metal stick with threads on each end. Defender Security E 2499 Vintage style door Knobs with Classic Bronze Finish, 2- 1/4 In. Outside Diameter (1 Set), 4.5 stars, 1.984 reviews, 500+ bought in past month, $9.98 prime Two Day...

Metal stick with threads on each end. Image of 4" Standard Threaded Door Knob Spindle. Threaded Spindle. 4.5 stars, 107 reviews, $15.50 prime FREE delivery Thu, Jan 4.

4 crystal door knobs and 2 metal sticks with threads on each end. 2 Sets Crystal Door Knobs Mortise Style Fluted Glass Door Knobs Antique Door Knobs with Spindle Antique..., 4.5 stars, 178 reviews, 100+ bought in past month, $20.99...

End ID.

ID from OP's alt text: Reply from zillychu: how many Tumblr users does it take to screw in a doorknob. End ID.

ID. Screenshot of Discord chat:

FishTetris, Yesterday (Jan 2, 2024) at 2:03PM:

@Chrissy currently howling over your doorknob woes. get well soon

Chrissy, Yesterday at 2:03PM:

its giving very Guam Cookies with "oh THIS is the one y'all like?"

FishTetris, Yesterday at 2:04PM:

flaskbacks to college when the vis arts second floor door handle fell off and it was like that for three days

picture of door with red bar. Piece of paper is taped to cover part of the bar: Notice: The Door Handle Has Fallen OFF. Another piece of paper is taped to the right of the bottom of the bar: i noticed! in all caps

5 reactions of joy (smiling face, scrunch eyes, raised eyebrows, teardrops from both eyes)

End ID.

ID. Picture of OP holding the Door Knobs in the packaging. End ID.

ID. Picture of OP holding the Door Knobs with one doorknob screw onto each side of the spindle. End ID.

ID. Picture of taped up box of 8 Family Rolls of Bounty paper towels. End ID.

ID. Picture of box, now empty and with Patches inside. End ID.

ID. Picture of old remaining doorknob (on inside of door). End ID.

ID. Picture of hand holding old doorknobs and spindle. One doorknob is screw onto the spindle. In the background, the new doorknob can be seen installed on the door. End ID.

ID. Picture of view down a staircase that winds down a square path. Patches is running down a turn ahead. End ID.

ID. Picture of view directly down staircase. Patches is a flight ahead. End ID.

ID. Picture of the inside of the new doorknob. End ID.

ID. Picture of the outside of the new doorknob. End ID.

ID. Patches looking at the camera from the ground. End ID.

ID. Patches looking to the right on top of an ottoman with 3 pillows behind her. End ID.

ID. Patches on the same ottoman, sprawled so that you can see her stomach. End ID.

ID. Patches looking up and to the left with ears perked as she lies on her stomach on top of a fabric laptop carrying case. End ID.

ID. Patches lying on the floor on her stomach. End ID.

ID. Patches poking her head out of her purple cat bed. End ID.

ID. Patches with eyes closed and paws wrapped around OP's fist / wrist / arm. End ID.

Cant have fucking shit in Detroit

[sunliftgaragedoorcalgary]

Quick Guide to Replacing Your Garage Door Panels

Step by Step Quick Guide to Replace a Garage Door Panel Easily

Step 1. Check Garage Door Damage: Before starting. Check if multiple parts need replacing. Small holes can typically be repaired, but major damage may require panel replacement. Step 2. Select suitable replacement panels:  Replace your garage door with steel, metal, or wood. Contact Calgary, Cochrane, or Okotoks garage door repair services provider for help. Match the new panel to the door's style and color for a clean effect. Step 3. Get supplies and tools:  Safety goggles, gloves, and a drill are essential before you start with the work. Step 4: Remove the broken panel:  Disconnect the automatic garage door opener first. Make sure that the door didn’t fall. Start at the bottom and remove any screws, or clips holding the shattered panel. Watch out for heavy garage doors. Step 5: Install the panel:  Replace the old panel. Check the weather stripping and examine whether it fit with the other panels or not. Screw or clip the panel to the door frame. Connect two garage doors with many panels to ensure their hinges work smoothly. Step 6: If necessary, reconnect the garage door to the opener after installing the replacement panel. Manually open and close the door before automating it. Step 7: Once Done Make sure the door is straight after installation. Use new paint or sealant to match the door and keep rain out.  After replacing the panel, Check for oil moving parts. Why Hire a Pro? You can change garage door panels yourself, but having a professional do the job is much more relaxing and efficient. Visit a Calgary, Cochrane, or Okotoks garage door replacement companies if you're unsure how to do it? The Garage Door Repair Calgary, Cochrane or Okotoks experts is your one shop solution for all. Changing garage door panels requires research, material selection, and careful installation. With this tutorial, you can confidently fix your garage door's appearance and function. If you need help, get instant support at Sunlift Garage Doors Calgary

[buyhomeblinds222]

Common Issues with Roller Blind Hold-Down Brackets and How to Fix Them

Roller blinds are a popular choice for window treatments, offering style and functionality. One critical component that ensures their effectiveness, especially in windy areas, is the roller blind hold-down brackets. While these brackets are designed to keep your blinds in place, they can sometimes encounter issues that compromise their performance. In this article, we will explore common problems with roller blind hold-down brackets and provide practical solutions to help you maintain your window coverings.

Common Issues with Roller Blind Hold-Down Brackets

1. Misalignment

One of the most frequent problems with roller blind hold-down brackets is misalignment. Over time, the brackets can shift due to regular use or environmental factors. Misalignment can lead to uneven tension on the blinds, causing them to not roll up or down properly.

Solution:

To fix misalignment, start by checking the positioning of the brackets. Use a level to ensure they are straight and aligned with each other. If necessary, adjust the screws holding the brackets in place or re-drill new holes if the old ones are too damaged.

2. Broken Clips

Another issue often encountered is broken clips that secure the roller blinds to the hold-down brackets. These clips can snap due to wear and tear or excessive force when operating the blinds. Without these clips, the blinds can become unstable, failing to provide the desired coverage.

Solution:

Replacing broken clips is relatively straightforward. Check with your retailer or manufacturer for replacement parts that match your specific roller blinds. Simply remove the old clip and attach the new one, ensuring it snaps securely into place.

3. Rust and Corrosion

For outdoor applications or in humid environments, rust and corrosion can affect roller blind hold-down brackets. This deterioration can weaken the structural integrity of the brackets and lead to eventual failure.

Solution:

If you notice signs of rust, consider applying a rust-resistant spray or paint designed for metal surfaces. For heavily corroded brackets, replacement may be the best option. Regular maintenance, such as cleaning the brackets and checking for any signs of wear, can help prevent rust buildup.

4. Loose Screws

Screws that hold the brackets in place can become loose over time, leading to instability. This can result in the blinds moving unpredictably, particularly in windy conditions.

Solution:

Periodically check all screws associated with the roller blind hold-down brackets. If you find any that are loose, use a screwdriver to tighten them. For screws that have stripped their holes, you may need to use larger screws or insert wood filler to secure them properly.

Preventative Measures

To minimize issues with roller blind hold-down brackets, regular maintenance is key. Inspect your brackets at least once a season, checking for alignment, loose screws, and signs of rust. Keeping the brackets clean and free from debris can also extend their lifespan and functionality.

Conclusion

Roller blind hold-down brackets play an essential role in the performance and stability of your window treatments. By being aware of common issues such as misalignment, broken clips, rust, and loose screws, you can take proactive steps to address them. Regular maintenance and timely repairs will ensure your roller blinds continue to operate smoothly, enhancing both the comfort and aesthetics of your space. Whether you are a homeowner or a tenant, understanding how to troubleshoot and fix these common problems will help you enjoy your roller blinds for years to come.

[gadgetrevive]

Video Title: Top 5 iPhone Repair Mistakes - How to avoid them! Video Text: what's up everybody hugh jeffries here in this video we're going to be taking a look at the top five biggest iphone repair mistakes that people make and how to avoid them when you're fixing your own phones coming up coming in at number five is poor screw organization it's vital to make sure that you organize the screws when disassembling an iphone so when it comes to reassembly not only is it a lot easier because you know where the screws go but you can't cause any damage to the device by putting the wrong screw into the wrong hole this is a common issue seen on screen replacements where someone puts the longest screw of the metal plate into one of the smaller screw holes and ends up screwing that screw through the logic board of the phone then certain things won't work on the phone your phone might not even boot up it can cause major issues and it's something you definitely want to avoid so the easiest way to sort out parts and the way that i do it is i lay the part out on the desk and then i put the matching screws to that part or component next to it so when time comes to reassemble the item i know exactly where the screw came from coming in at number four is the use of cheap or generic parts this is a common issue that people do they buy the cheapest knock-off thing that they can buy and hopefully it's going to work as good as the apple one well that's just not the case when buying parts you want to make sure to get known brand or high quality replacement parts you want to make sure it comes from an actual company or has a brand name on it and isn't just some generic part a lot of people also go for higher capacity gold batteries i see that a lot in phones especially on ebay and those batteries are fakes they're literally just a sticker over a normal battery and if you check out the milliamp hours in applications like coconut battery it will report just like a normal iphone battery number three the use of tools and equipment now this is also a very important thing and a lot of people just buy the cheapest tool kits or use the ones that are included if it's a one-off repair then you can easily get away with the cheap tool kits and screwdrivers and things that are included with parts i used to use those all the time but then after upgrading to an actual tool kit you wouldn't believe the difference it makes having proper tools they're the correct size their quality they don't strip screws as easily and it's just a lot nicer experience i remember the first time i opened up the iphone 5 i used a knife to remove the standoff screws on the iphone 5 because i didn't have a proper standoff bit or even a flathead to just rig it to work now that's something that's very important and if you are doing a lot of iphone repairs or a lot of electronic repairs definitely invest in a tool kit i personally use the ifixit tool kit but there's many others out there and if you don't want to buy a tool kit some of the most vital uh things you need for an iphone repair are a phillips screwdriver pentalobe bit uh iphone standoff bit a sim eject tool for taking out the sim trays that's kind of an obvious one and some basic prying tools like a very thin metal prying tool which helps pry away things as well as some plastic spudges to disconnect cables to avoid um damaging anything with your big fingernails coming in at number two is the incorrect removal of the battery adhesive strips they're very strong and hold down the battery to an extraordinary amount of strength they are total overkill and it's apple's way of stopping you from replacing your own battery if you are doing a battery replacement make sure to remove the dock connector if you have an iphone 5s or se and if you have an iphone 6 or later just remove the taptic engine that should give you enough clearance to be able to pull the battery adhesive tabs sort of level enough and that they won't get caught on anything as well as aren't on too much of an

angle which causes too much strain on the tab itself and it will result in the tab breaking if you break the tab it's a lot of prying and heating to try and get that battery out so you want to try as best you can not to break those adhesive strips so when you're doing that be very careful and gentle with those tabs as they are very easy to break and anyone who's repaired an iphone has probably had a similar experience of those tabs breaking and knows what it's like to try and pry out a battery and coming in at number one for the biggest iphone repair mistake is not disconnecting the battery you probably saw this one coming from me because i go on about it in all of my videos it is crucial to disconnect that battery before proceeding to remove the lcd or work on any other part of the iphone i personally know somebody who had an iphone 6s and attempted their own display replacement they didn't remove the battery or disconnect it and when they went to plug in the new screen because those connectors were live it shorted out and actually sparked and fried the backlight to the iphone basically what that means is while the phone will still power on you just can't see anything on the screen because the actual light or the brightness is completely gone it's completely fried all because the battery wasn't disconnected while the backlight can be repaired by someone who can do a board level repair it's extremely costly time consuming and you have to find somebody who can actually do the repair for you so just avoid this whole problem by disconnecting the battery so that's it the top five biggest iphone repair mistakes that people make and some of them myself have made over the years when repairing iphones i hope you guys found this video useful and giving you some tips and tricks as well as things not to do when repairing your iphone and on that note this has been a huge jeffries video if you like what you saw hit that subscribe button and consider checking out my social media as i post plenty of pictures of iphones and iphone repairs as well as do plenty of behind-the-scenes uh stuff on my instagram story and so i always keep you updated over there also make sure to check out the iphone playlist for more videos just like this one that's all for this video and i'll catch you guys next time

[slidingdoors-experts]

Reasons to Repair or Replace Your Sliding Glass Door

Everyone who has sliding glass doors in their house can attest to its beauty and practicality. This kind of door lets in a lot of natural light and provides an expansive view of the outside. While sliding glass door repair tampa have many advantages, they also come with some potential drawbacks, such as energy loss, broken glass, as well as inflexible rollers.

The procedure of repairing or replacing sliding glass doors might vary, and there are various reasons when homeowners make that decision. Sometimes, all it takes to fix anything is to replace the worn-out moving pieces, like rollers. On the other hand, if the door is beyond repairable age, a replacement door can be installed.

Replacement or repair of your glass sliding doors should be a regular part of your house maintenance program if you observe any of the indicators that follow:

● Worn or soiled rollers

The stationary rollers on each side of a sliding glass door allow it to glide effortlessly open and closed. On the other hand, if the door becomes stuck or extremely difficult to move, it's probably as the rollers are worn out or blocked. This is particularly the case with metal rollers, as they are susceptible to rusting.

● Incorrect positioned doors

The entire sliding door will become misaligned if the rollers that support it come loose from their track. Unless this is addressed, opening and closing the door will be a real challenge. The screws that secure the rollers to the path are the primary culprits here. As time passes, these screws may come loose or get stripped. Screwing them back in or getting the best sliding door repair tampa the fix in such a situation.

● Damaged or shattered glass

Sliding glass doors are susceptible to environmental factors and commonplace incidents that may lead the glass to become hazy, damaged, cracked, or chipped. Any damage to the glass, no matter how small, should be remedied without delay lest it worsen and necessitate full glass replacement.

If you want to avoid hurting yourself or someone else, it's best to hire a professional to replace the glass in your sliding glass door. When you need to change the glass in your sliding glass door, it's best to collaborate with a certified glass repair firm.

● Openings on the door

You may be wasting energy if there is a space between the sliding glass door and the structure that surrounds it. With air leaking to the outdoors, your home's HVAC system has to work harder to keep you comfortable. Sliding glass doors erected before modern environmentally friendly standards and technologies were available are notoriously inefficient. If your door has any gaps in it, filth and insects will be able to easily get in.

An easy approach to identify if you have trouble discovering any gaps is to look for them. While you're inside, have someone else stand outside to flash the light on the door. By observing any spots where light is penetrating, you can detect any openings. You can arrange to have the door fixed or replaced after you've located the holes.

[homeimprovementway]

Revive Your Cabinets: Easy 2-Step Methods to Fix Sagging

To fix sagging cabinets, you can use two easy methods: 1) Adjusting the cabinet hinges and 2) Adding support from underneath. These methods are simple to perform and can effectively restore stability to your cabinets. If you notice that your cabinets are sagging, it is important to fix them promptly to prevent further damage and ensure your cabinets function properly. We will explore these two methods in detail, providing step-by-step instructions on how to fix sagging cabinets. Whether you have basic DIY skills or are a seasoned home improvement enthusiast, these methods are accessible and can be done without professional assistance.

Method 1: Tightening The Hinges

To fix sagging cabinets, you can try tightening the hinges as a simple and effective method. Adjusting the screws on the hinges can help lift and straighten the cabinet doors, restoring their proper alignment and functionality. Sagging cabinets can be a real eyesore in any kitchen or bathroom. Luckily, you don't always have to replace the entire cabinet to fix the problem. One effective and budget-friendly method is to tighten the hinges. This simple solution can help bring back the sturdiness and functionality of your cabinets. Let's dive into this method step by step.

Inspecting The Hinges First things first, conduct a thorough inspection of the cabinet hinges to identify any issues. Look for loose screws, damaged hinges, or any other signs of wear and tear. This initial inspection will help you determine the extent of the problem and guide you in taking the necessary actions. Tightening Loose Screws If the hinges seem to be in good condition but the screws are loose, tightening them can often solve the sagging problem. To do this: - Open the cabinet door and locate the screws on the hinge. - Using a screwdriver, turn the screws clockwise to tighten them. Make sure not to overtighten, as it can strip the screw holes. - Repeat this process for each loose screw on the hinges. Tightening the screws evenly on all hinges will help restore the alignment of the cabinet doors and alleviate the sagging issue. Remember to test the doors after tightening to check for improvement. Replacing Damaged Hinges If you find that the hinges are damaged or beyond repair, replacing them is the next step. Here's how to do it: - Remove the screws from the damaged hinge using a screwdriver. - Take the old hinge off the cabinet frame and discard it. - Align the new hinge with the existing holes on the cabinet frame. - Insert the screws into the holes and use a screwdriver to secure the new hinge in place. - Repeat this process for each damaged hinge. Replacing damaged hinges will ensure the cabinet doors are properly aligned and functional. It's essential to use hinges of the same size and type to maintain consistency. By inspecting the hinges, tightening loose screws, and replacing damaged hinges, you can fix sagging cabinets effectively. These simple steps allow you to restore the stability and appearance of your cabinets without breaking the bank. Give your kitchen or bathroom a quick and affordable facelift by implementing this method.

Method 2: Adding Support

If you've assessed your cabinet structure and found that additional support is necessary to fix sagging cabinets, don't worry! Adding support is a relatively straightforward method that can help restore the sturdiness of your cabinets. Assessing Cabinet Structure Before you start adding support, it's important to evaluate the current state of your cabinet structure. Look for any weak areas, loose screws, or signs of damage that may be contributing to the sagging. By identifying these issues, you can address them effectively. Installing Support Brackets One of the easiest ways to add support to sagging cabinets is by installing support brackets. These brackets are typically made of metal and can be mounted to the inside of the cabinet walls or underneath the shelves. - Start by measuring the width and depth of the cabinet walls or shelves where the brackets will be attached. - Using these measurements, purchase support brackets that are suitable for your cabinet. - To begin installation, position the brackets where they will provide the most support, typically near the corners or the middle of the cabinet. - Mark the screw holes for each bracket, ensuring they are aligned properly. - Drill pilot holes at the marked spots to prevent the wood from splitting when you attach the brackets. - Secure the brackets into place using screws, making sure they are firmly attached. Using Additional Reinforcement In some cases, you may find that adding support brackets alone is not enough to fully fix the sagging cabinets. In such instances, you can use additional reinforcement techniques to provide extra stability. - Consider using L-brackets or angle irons to reinforce the corners of the cabinet where the most pressure is exerted. - Attach these brackets using screws or bolts, ensuring they are securely fastened. - If needed, you can also reinforce the cabinet with plywood, particleboard, or a similar sturdy material. By following the steps outlined above, you can effectively add support to your sagging cabinets and restore their strength and stability. Remember to assess the cabinet structure, install support brackets, and use additional reinforcement if necessary.

Conclusion

While sagging cabinets can be a nuisance, fixing them doesn't have to be complicated. By following these two easy methods, you can restore the stability and functionality of your cabinets in no time. Whether it's adjusting the hinges or using reinforcement brackets, these simple steps will help you say goodbye to sagging cabinets. Remember, regular maintenance is key to preventing future issues and keeping your cabinets in top shape. So, roll up your sleeves, get DIY-ing, and enjoy the satisfaction of a job well done! https://www.youtube.com/watch?v=Oh_xjMIRN7k Read the full article

[wordnerdworld]

YouTube is really so helpful sometimes. Right now I'm appreciating the folks who take time to make really easy, really practical, not-at-all-condescending basic home repair videos.

When I was cooking tonight, one corner of my spice-rack pulled away from my pantry door. This made the whole thing loose and definitely at risk of falling off unexpectedly, especially since it wobbled every time I opened/closed the door. That was a very messy disaster waiting to happen.

So I didn't want to leave it for too long, but I also needed to find a fix that would work given my limited supply of home-repair equipment and my limited experience with home-repair.

The issue was a stripped screw hole, which isn't a big deal on its own, but this was complicated by the fact that the door is a hollow-core door (very little material for the screw to grip onto), the location of the hole couldn't be changed (because the rack has to hang where it is), and the screw width couldn't be changed (because the screw first passes through a hole in the metal of the rack).

So I went looking for videos and found this one.

Easy to understand and it presented multiple approaches to solving my problem.

I looked for a longer screw (among my random assortment of saved hardware items) but didn't have a longer screw that wasn't also wider and so wouldn't fit through the metal hole.

I tried the toothpick trick, but that didn't work because I was already dealing with a hole that was pretty small and the toothpick bits just kept falling down into the hollow interior of the door.

So I dove back into my hardware hoard and found a plastic wall anchor that looked like it could fit into the existing door hole and a new screw that looked like it could fit into that anchor while also fitting through the metal hole in the rack.

I couldn't drill anything (that would require removing the spice-rack entirely). But there was just barely enough room to squeeze the anchor into alignment between the rack and the door. And then I was luckily able to use a screw to push hard enough and straight enough to lodge the anchor into the door. It wasn't flush, but I was still able to get a grip with the new screw and tighten things enough that it's more flush and definitely more secure.

So kudos to all the YouTube how-to and home-repair folks out there sharing their knowledge in easily accessible ways.

Also I have now become One of Those People. My hoard of "But Someday I Might Need That" proved useful one (1) time, so now it's existence is justified for eternity. Can never get rid of anything ever again.

[yashkhanna2042-blog]

A Guide To Common Household Repairs

                Home repairs can be intimidating, but with the right knowledge and tools, they can be simple and cost-effective. This guide will provide you with a comprehensive overview of common household repairs, including lightbulb replacements, drywall patching and everything in between.

How To Fix A Leaking Faucet

Tools You Need To Fix A Leaking Faucet

Screwdriver

Adjustable wrench

Replacement O-ring or washer (this will depend on your faucet type)

Plumber's tape (aka Teflon tape)

Towel (to catch any drips)

How To Fix A Leaking Faucet

Turn off the water supply to the faucet.

Remove the handle and cover plate.

Locate the leaky part (it's usually the O-ring or washer).

Replace the faulty part with the new one.

Reassemble the handle and cover plate.

Turn the water supply back on and test for leaks.

How To Replace A Light Switch

Tools You Need To Replace A Light Switch

Flat-head screwdriver (to remove the cover plate)

Voltage tester (to ensure the power is off)

Wire cutter (to snip the wires)

Wire stripper (to expose the wire ends)

Wire nut (to connect the wires)

New light switch

How To Replace A Light Switch

Turn off the power to the light switch at the breaker box.

Remove the cover plate and unscrew the switch from the wall.

Disconnect the wires from the old switch, being careful to remember which wire goes where.

Strip about half an inch of insulation from the ends of the wires with the wire stripper.

Connect the wires to the new switch, matching the colours and ensuring the connections are tight.

Screw the new switch into the wall box and secure the cover plate.

Turn on the power at the breaker box and flip the switch to make sure it's working properly.

How To Patch A Drywall

Tools You Need To Patch A Drywall

Drywall saw (to cut out the damaged area)

Putty knife (to apply the joint compound)

Drywall tape (to reinforce the joint)

Joint compound (aka "mud") to fill in the hole

Sandpaper or Drywall Sander (to smooth out the patched area)

Vacuum (to clean up any dust)

Brush (to dust off any remaining debris)

How To Patch A Drywall

Use the drywall saw to cut out the damaged section, making sure to leave clean, straight edges.

Apply the drywall tape over the cut edges and spread the joint compound over the tape, feathering it out onto the surrounding wall.

Allow the joint compound to dry for 24 hours.

Apply a second coat of joint compound and let it dry.

Sand the patched area until it's smooth and level with the surrounding wall.

Apply a coat of paint or primer to blend it in with the rest of the wall.

How To Replace A Lightbulb

Tools You Need To Replace A Lightbulb

A ladder (if the light is high up)

A clean cloth or towel (to clean the bulb and light fixture)

A replacement bulb that is the correct wattage and size for the fixture.

How To Replace A Lightbulb

Turn off the power to the light fixture at the breaker box.

Allow the bulb to cool down before touching it.

Remove the old bulb by gently twisting it counterclockwise.

Wipe the bulb and fixture clean with a cloth or towel.

Install the new bulb by gently twisting it clockwise into the fixture.

Turn the power back on at the breaker box and test the new bulb.

How To Fix A Clogged Drain

Tools You Need To Fix A Clogged Drain

Plunger (this is the most important tool!)

Drain snake or auger (a long flexible metal cable with a hooked end that can reach deep into the drain)

Bucket (to catch any water that may come out of the drain)

Flashlight (to see into the drain)

Rubber gloves (to protect your hands from any gross stuff that may come out of the drain)

Baking soda and vinegar solution (to help clear the clog)

How To Fix A Clogged Drain

First, try using a plunger to try and dislodge the clog. Place the plunger over the drain and pump it up and down firmly.

If the plunger doesn't work, try using a drain snake or auger. Insert it into the drain and carefully work it back and forth to dislodge the clog.

If those methods don't work, try pouring a mixture of baking soda and vinegar down the drain, followed by hot water. The baking soda and vinegar will create a fizzy reaction that can help break up the clog.

After you've poured the baking soda and vinegar mixture down the drain, let it sit for about 15 minutes.

Boil a pot of water and slowly pour it down the drain. The hot water will help loosen any remaining debris in the drain.

Turn on the water and check to see if the drain is now flowing freely.

If the drain is still clogged, you may need to call a professional plumber to clear it out.

[knowledgefoundry]

How to Replace Your iPhone XS Max Camera Glass in 5 Easy Steps

Your iPhone XS Max is an investment, and you take care of it as such. You baby it, keep it in a case, and always have a screen protector on it. So, when the unthinkable happens and you drop your phone, shattering the camera glass, you know you need to fix it—and fast.

Lucky for you, replacing the camera glass on your iPhone XS Max is a fairly easy process that you can do at home in just a few steps. All you need is a replacement camera glass, a Phillips screwdriver, a suction cup, a pry tool, and some iOpener.

Power down your iPhone and remove the SIM card tray.

If you're like most people, you probably use your замена стекла камеры iphone xs max for just about everything. From taking pictures and videos to sending emails and surfing the web, your iPhone is always by your side. But what happens when the unthinkable happens and your iPhone's camera glass becomes cracked or shattered?

Don't worry, replacing your iPhone XS Max camera glass is a relatively easy process that can be completed in just a few simple steps.

1. Power down your iPhone and remove the SIM card tray.

Before you begin, you'll need to power down your iPhone and remove the SIM card tray. To do this, simply press and hold the Power button until the "slide to power off" slider appears. Once your iPhone is powered off, insert a SIM card ejection tool or a paperclip into the small hole next to the SIM card tray.

2. Locate the camera glass replacement adhesive strip.

Once the SIM card tray is removed, take a look at the exposed camera lens. You should see a small adhesive strip running around the perimeter of the lens. This is the replacement adhesive strip that you'll need to remove in order to access the cracked or shattered camera glass.

3. Carefully remove the old camera glass.

Using a pair of tweezers, carefully remove the old camera glass from the iPhone's camera lens. Be careful not to touch the lens itself with the tweezers, as this could damage the delicate components. Once the old camera glass is removed, dispose of it properly.

4. Apply the new camera glass.

Now it's time to apply the new camera glass. Start by peeling the adhesive backing off of the replacement adhesive strip. Then, align the new camera glass with the iPhone's camera lens and press it into place. Make sure that the glass is seated properly and that there are no air bubbles.

5. Reassemble your iPhone.

Once the new camera glass is in place, simply reassemble your iPhone by replacing the SIM card tray and powering it back on. And that's it! You've successfully replaced the camera glass on your iPhone XS Max.

Use a suction cup to slightly lift and remove the back glass panel.

Removing the back glass panel on your iPhone XS Max can be done with a few simple steps. Use a suction cup to slightly lift and remove the back glass panel. You may need to use a plastic opening tool to help with the removal. Be careful not to damage the LCD screen when removing the back glass panel.

Disconnect the battery connector and the two LCD connectors from the motherboard.

Start by disconnecting the battery connector. You'll need to use a small Phillips screwdriver to remove the two screws that hold it in place. Once the screws are removed, you can carefully disconnect the battery connector from the motherboard.

Next, you'll need to disconnect the two LCD connectors from the motherboard. These are located just above the battery connector. Again, use a small Phillips screwdriver to remove the two screws that hold them in place. Once the screws are removed, you can carefully disconnect the LCD connectors from the motherboard.

Now that the battery connector and the two LCD connectors are disconnected from the motherboard, you can begin to remove the old camera glass. Start by carefully peeling back the metal plate that covers the camera lens. Once the metal plate is removed, you can use a small suction cup to remove the old camera glass.

To install the new camera glass, simply place the new glass over the camera lens and replace the metal plate. Once the new glass is in place, you can reconnect the battery connector and the two LCD connectors to the motherboard. Be sure to screw them in place so that they are secure.

Now your iPhone XS Max is as good as new!

Pry the old camera lens off with a safe opening tool.

If you're like most people,Dropping your phone is one of the worst things that can happen to it. And if you're unlucky enough to have cracked your camera glass, you might be wondering how you can replace it.

Here are five easy steps to follow to replace your iPhone XS Max camera glass:

1. Start by power cycling your phone. This will help clear any potential issues that could be causing your camera glass to crack.

2. Next, remove the back case of your phone. You'll need to use a safe opening tool to do this.

3. Once the back case is off, locate the old camera lens. You'll need to pry it off with your opening tool.

4. Pry the old camera lens off with a safe opening tool.

5. Finally, insert the new camera lens and screw it into place.

following these five easy steps, you'll have your camera glass replaced in no time!

Clean the adhesive off the old camera and align the new one.

Assuming you have already gathered the necessary tools, here are the five easy steps to replacing your iPhone XS Max camera glass:

1. Start by removing the two screws from the bottom of the phone using a screwsdriver.

2. Next, use a safe opening tool to pry open the phone case. Be careful not to damage the case or the phone itself.

3. Once the case is open, locate the old camera. Gently remove it from the case, taking care not to damage the surrounding wires or components.

4. Clean the adhesive off the old camera using a safe cleaning solution.

5. Now it's time to align the new camera. Carefully insert it into the case, taking care not to damage the surrounding wires or components. Then, reattach the two screws at the bottom of the phone.

And that's it! You've now successfully replaced your iPhone XS Max camera glass.

Press the new camera into place and reassemble the iPhone.

Assuming you have already completed the first five steps, which are:

1. Power off your iPhone XS Max and remove the SIM card tray.

2. Use a small Phillips screwdriver to remove the two screws next to the Lightning connector.

3. Gently pry up the display assembly enough to expose the camera.

4. Use a safe opening tool to release the clips holding the camera in place.

5. Carefully remove the old camera lens.

6. Press the new camera into place and reassemble the iPhone.

Now that you have replaced the camera glass, it is time to reassemble your iPhone XS Max. Begin by pressing the new camera into place. Make sure that it is seated correctly and then replace the two screws you removed in step two. Next, gently pry the display assembly back into place. Once it is seated correctly, replace the SIM card tray. Finally, power on your iPhone XS Max and test the new camera.

Power on your iPhone to make sure the new camera is working.

If you've followed the previous steps correctly, your new iPhone XS Max camera glass should be successfully installed and working. To test it out, simply power on your iPhone and open the Camera app. If everything appears normal and you can take pictures without any issue, then congratulations! You've just replaced your iPhone's camera glass successfully. After completing these five easy steps, your iPhone XS Max camera glass will be replaced and good as new! With a few simple tools and a little patience, anyone can do this repair at home.

[littlefreya]

Easy Prey

Summary: Direct sequel to Jerk. Ring or not, August promised himself that he will make you his, in whatever mean possible and he kept that promise. 

Pairing: August Walker x Reader (2nd person pov)

Word count: 1.6K

Warnings: 18+, dark, kidnapping, bondage, dubious consent, teasing, dirty talk, gunplay (yeah add this to the list of kinks I gave you), sweet degradation and praise.

A/N: You thought August is going to sweet talk this one, didn’t you? Surprise! This was a short drabble brought by a prompt, turned into a one-shot and then my beta @agniavateira suggested this as a sequel to Jerk before I posted. Since most of you may be in a thanksgiving dinner tomorrow, enjoy my own early b-day gift to you! Many thanks to @wondersofdreaming and @sapphirescrolls who convinced me to post this. 

Please comment and reblog if you enjoyed. Your feedback is my fuel. 🖤

Easy Prey

August Walker lived his life swinging between the two sharp edges of a sword; but then, how could he not? He had to maintain a handsome prime-alpha male reputation while hiding his true cruel nature masked beneath mist and shadows.

It took everyone by surprise once it was revealed that the slick, charming agent was a vicious, Armani-wearing monster. A hard-to-swallow pill for most, but these two diverse entities were always one and the same: 

August Walker was John Lark the way darkness followed light. 

And how unfortunate it was of you to be lured into the spider’s web, stunned by the beauty of the pearly silk; you’ve gotten too close and had your limbs caught in the sticky threads. Now captured, you’ve earned yourself a taste of August’s sweet toxin yourself. 

Fear wasn’t even close to the sensation that was gnawing in your gut.

The suite was cosy; a sleepy fire crackled in the mantle, shy beams of maple light kissed your bare breasts while you laid upon the softest pillows. It felt like a sinister joke compared to the ropes charring the supple flesh of your wrists. August had you stripped of any remnants of protection of course, save for the little jewellery circling your finger which he eyed with a blank stare that screamed in its contained silence.

Fully clothed, he stood at the fore of the bed, wearing a blue three-piece suit as if he was attending a royal wedding. A magnum was clutched in his right hand and a dagger in the other. The calmness and elegance of his appearance only made you arch and grunt in your fruitless attempts to set yourself free.

“Ropes too tight, angel?” He hummed, his voice so pleasant it felt like your lungs were floating in a void. His crystal-pale gaze dawdled upon you, invading beneath the skin, penetrating the warm crease between your legs which you fought to keep shut. 

He felt it, or maybe even smelled the arousal that wafted at his direction and chanted his name.

“I’d save my strength if I were you. We’ve already proven that no one can hear your screams and we have a long night ahead of us.”

His words covered the bones of your spine with a thick layer of frost and in your searing throat, a bitter substance reemerged. Screwing your eyes shut, you wished more than anything for this to be a nightmare; but every time the binds twisted about your hands, you remembered the dreadful meaning behind the pain. 

It was there to remind you of the harsh slap that was reality.  

August tilted his head, a smile beginning to spread from each corner of his mouth: all pleasant and  charming as if this was nothing but a couple’s naughty getaway. 

“You can’t wake up from this, this is not a dream… or a nightmare, depends on your disobedience,” he assured, boding a sudden hollow in your chest. “Now, which one do you prefer? The knife or the gun?”

“Fuck you!” 

Defiant, you gathered yourself to scream a trembling cry, sending your legs to kick the mattress in a hopeless fight. Only it made things worse as August was able to spot the little dew-kissed orchid between your legs, glistening-wet with invitation. 

Flicking a tongue over his upper lip, he crept close. His broad shoulders strained, his posture that of an elegant predator; as you saw the large outlines of his heavy cock stretching his navy-blue trousers, even hatred and horror couldn’t mask the pang of need that shot through your core.

Despite the panic, the traitorous instinct of life whispered of undisclosed, primal lust. You wished so badly you could fight or hide it, but alas there was no hiding from August. He could sense it, see it, and even taste it on his wicked tongue. 

“Gun then,” he answered and slid the knife back into the holster in his belt.

Your breath hitched as the mattress dipped beneath his weight, and you watched paralysed as he aimed the gun between your legs. Strong tremors coursed along your skin and your knees buckled and wobbled as the cold metal touched you; and yet, in that very moment, you did the impossible and moaned.

“Has it been that long since you had a dick inside you?” August observed with a vicious grin crisping his lips. It made his moustache twitch almost comically. 

“Don’t worry sweet angel, we’ll fix that soon.”

Pushing the gun between your kneecaps, he forced them open and ran the barrel feverishly down your inner thighs. The metal was freezing against your flesh, eliciting little tingles to spiral beneath the tender brush. Gasping, you looked away from him ashamed. You were terrified, not just of him, but from how much the wanton centre of your sex clenched from his ministrations.

You were bound and kidnapped by a dangerous man, and yet in your mind played the sick fantasies of him unbuckling his belt and giving you his full girth hard and wild. 

“You will soon have me in every hole,” August continued with a promise on his honeyed lips while lowering the brim of the weapon perilously close to your radiating heat and toying with the sensitive area teasingly. “I will make it hurt real bad, you’ll feel me there for days if not more,” he hummed and swerved the barrel between your engorged lips. 

“Please!” You gasped and writhed away slightly, tugging on the binds that began chafing your delicate skin. August raised his glare to meet your pleading eyes and leaned forward, his shadow looming over you entirely. Reaching one hand to your nape, he clutched you forcefully while his icy glare pierced right through your skull.

Slow and sensual he began to run the gun between your soft petals, gingerly grazing the hard shaft at the plump peak of flesh that made you cry out with both pleasure and despair. 

“Aww...” He keened and groaned. Never stopping his coaxing of your cunt with the still object, his breath huffed hot upon your cheek as he rounded his beautiful lips in faux pity. “Poor helpless little butterfly.”

Crying and dazed, you stared directly into his eyes. Words of plea kept running caged inside your head, unable to make their way out while you watched August’s large shoulder move back and forth. The movement resulting in the unwanted pleasure. Back and forth, he stroked you, gradually increasing the pace, and not without style even. Ruthless, August was keen on making you come.

You weren’t even sure what it was that you begged for at that point.

Grunts and sobs escaped your throat unwillingly. You squirmed and pushed against it, your body craving for more: not just for the rough friction that tingled at your cunt but also at the large bulge visible at his groin. The more rapture began to creep through your flowing tendons, the further you sank into delirium, wondering how he would feel like buried deep between your tight walls, fucking you the way only someone who has no boundaries would.

“Fuck!” You screamed, grinding against the metal while August leaned even closer and kissed the corner of your mouth before groaning and moaning at your lips. His hand worked hard between your thighs, the cold barrel now warm, the hollow edge coated with your elixir. 

The wall of your protests crumbled as the simmering surge of climax began pushing itself down your belly, leaving you teetering between self-loathing and ecstasy. 

“That’s right my beautiful butterfly, I’ll pluck your wings,” August promised in a husky whisper, watching you as you coiled and cried louder, your walls convulsing tightly around a sad, empty space as you came. If only you didn’t wish it was August choked between them instead.

As you slumped down, sweaty and breathless, he drawled a growl of content and slowly withdrew the gun to hold it next to your shivering face.

“I swear, Sloan’s assistants keep getting sluttier every year; the last one I fucked had a thing for me choking her,” he mocked while grazing the wet barrel against your cheek, “do you think you’d be into that too, sweetling? My hand around your throat?”  

Rounding your eyes in utter fear, you swallowed the dryness in your throat. August sighed with a malicious little grin while twisted awe danced between the blue, sparkling sapphires that examined you ecstatically, so fascinated by how easily he managed to break and bend you to his will.

Still holding the neck of the gun pressed next to your cheek, he reached the other hand above your head. A part of you was relieved for a moment, thinking he was about to untie the bind. 

But your hope quickly died as you felt his fingers rolling the ring that decorated your finger.

The diamond reflected onto the deep blue of his eyes as he examined it closely before throwing it directly into the fireplace.

“No!” You cried out brokenly, as the last memory of your old life disappeared in flames.

“Save your tears beautiful,” August retorted, his voice once again so soft it chilled your very core. He shifted his entire weight between your straddled thighs, and leaned in to kiss the wetness below your eye, “you won’t be needing it anymore.”

His tongue slipped out to collect the briny liquid that gathered on your cheek, and another hum of delight rumbled in his chest as his covered cock unmistakably ground against your mound, “I am your man from now on, might as well accept it and let me do whatever I want.”

Shivering under him, you took a deep breath, your body already swaying in demand as you felt him throbbing beneath the soft fabric of his pants. To your own horror, your head fell into a slow nod of shameful consent. 

It wasn’t just August you were afraid of, but also for yourself.    

[confused-android]

NaClYoHo Day 8

Well, to start off: today a lamp fell on me.

I was trying to replace the porch lamp. The people who flipped the house - often cursed as the "mother flippers" - picked a bafflingly huge fixture. Like, so big that we've been able to direct people to "the house with the giant light". So when a friend posted a free porch light fixture, I grabbed it (one year ago), and picked today to replace it.

Oh, the things that went wrong.

First, I started to remove the three obviously visible bolts holding it to the wall. I took the bottom one off, then the middle one... whoops! Turns out, the top one was just decorative, so the middle one was really the top one, so when I took out that last remaining bolt, it had nothing keeping it up anymore. So a giant light hit me in the chest and I fell off the step stool. Not great! (I am fine. I have a scrape and I deep bruise on my chest and a scraped wrist, but it really could have been worse)

Then I had to drill two new holes in the brick. I have masonry bits, but I also have tendinitis. Also not great, but I drilled them.

Next, I installed the... idk what it's called. the metal thingie that goes between the wall and the light fixture, to actually hold it in place. I couldn't figure out why the grounding wire was attached the back of that thingie, but w/e, and then I connected all of the wires and then I tried to actually attach the light and... I had attached the metal thingie backwards. How? idk. I've never done this before, I was trying my best. But when I undid everything and tried to flip it and attached the light fixture again, I found that I'd stripped the holes I drilled.

So I went into my 'spare screws' tin and found two new screws that were the same length and shaft width, just with wider threads. I re-re-attached the metal thingie, attached all of the wires, finally got the lamp on the wall (I did... something wrong there, the screws sticking out were too long to fit under the lil caps) and went down into the basement to turn the power back on.

and the light wouldn't light. even with a new bulb, no dice.

so, I gave up for the day. I'll mourn this tonight, and undo everything I did and re-attach the old, giant fixture sometime tomorrow.

Today, I also:

had three great work meetings

put out the 'free stuff' box

drove to pick up and drop off Kiddo

returned the drain snake to the tool library, and got a chisel and post pounder

used the chisel to make the guest room door latch hole lower, then used vinyl wood putty to fill in where I chipped too deep, and also to fill in the old drill holes.

dealt with the moldy kombucha disaster (idk what happened. it was a new jar, but otherwise I did nothing different! gotta get a new scoby from a friend)

checked the basement HVAC system for the size filter it needs, and went on target dot com to order more

browsed for lamps I want for the dining room table and showed what I liked to Clementine Partner. They picked the one they liked best and are gonna buy it!

watched YouTube videos on how to clean out and replace the cracked caulk in my shower. I'm hesitant, bc the floor of my shower is v. irregular tiling, but all I can do is my best and be patient. I'm going to try to remember to not shower tomorrow morning, so it's dry enough to fix.

put away the rest of my laundry (to be fair, barely much left)

and I also made bread (I cheated and used active yeast) and chicken stock from scratch.

I am very tired and it's pretty late. There are two cats on my feet, and I need to figure out how to slide down from sitting with my laptop so my head can reach the pillow, but without losing the snuggles.

[imagine-nation20]

Mutants, and Magic, and Stones, Oh My

Summary: After the fighting stops, and everyone returns to the mansion to get back to their semi-normal lives, they meet an unexpected guest.

Requested: No? But also yes, by an anon

Request:Wild card! write whatever you hell you want to read! (or don't, if you don't feel like it)

Pairing: Sean Cassidy X Reader (Sort of. Its hinted at)

A/N: I’ve had this idea in my head for a very long time, but I haven’t seen to First Class movie since… like it came out? So excuse my weird lack of information. This was just a fun idea that I felt like writing, and thank you to the anon for giving me the means to do so! Also, reader is hinted more towards being female, so sorry.

~~~

Stephen Strange stared at you from across his desk. “I’m not angry,” He started.

You groaned in response, “Please don’t do that, ‘I’m not angry, I’m just disappointed’ speech, okay? I get it, I screwed up-”

“By almost destroying the New York Sanctum,” He grumbled back.

“But I didn’t,” You insisted, crossing your arms in a huff.

“(Y/N),” He tilted his head, hands clasping in front of him on the desk. “You’re a smart kid, but I took you on as my personal apprentice under the assumption that you would set an example.”

You threw your hands up, “I have, Doctor Strange,” you insisted, “I’m the best in the entire sanctum, maybe even every sanctum! I never lose a sparring match, I practise every spell given to me until I’ve perfected it, and yet, I make one little mistake, and suddenly I’m a disappointment?”

“I never said-”

“What do I have to do to prove to you I’m taking this seriously?” You asked, eyes wide in an earnest plea.

Stephen pinched the bridge of his nose, and you could have sworn you saw three new grey hairs sprout from his head. He was silent, staring down at his hands, which were now rested flat on his desk. His eyes trailed to you. 

He had taken you in as his apprentice on a whim. A car crash, which should have been fatal, instead left you paralyzed from the waist down. He had come to you in the hospital, clad in strange robes and a bright red cape, talking of magic and giving you back you ability to walk. You had thought he was crazy, if not for the demonstration he gave in the middle of your scramble to call a nurse or doctor.

You had accepted without any further fight. If you could get your freedom back, you would take it. So, you studied. Harder than any other apprentice. You weren’t going to take this miracle opportunity for granted. If Stephen told you to jump from a cliff, you would, with the faith that he knew what he was doing, and it would better your training.

So when he pulled the Eye of Agamotto from his neck, you tried not to let your jaw drop to the floor.

“There are disturbances, I can feel it through the eye,” He mumbled. “Something, or someone, is messing with the timeline.”

“And?”

He took a deep breath, sliding the eye across the desk to you, “And I want you to go back and fix it.”

“You-” You stuttered. “You want me to use the eye to go back and stop someone from messing up the past?”

“Yes,” He shrugged. “I would do it, but I have to look after the Sanctum, make sure we can recover from this recent setback,’ He leveled you with a look.

“Are you sure you want me to do it?” You asked, reaching out hesitantly.

“Weren’t you the one just grovelling for forgiveness?” He quirked a brow.

With that, you snatched up the eye, pulling it over your head and letting hang from your neck. The old, brassy metal and glowing green of the amulet contrasted with the white and grey of your robes.

“Take the staff with you,” Was his last fleeting comment, waving you from the room. “When you are ready, come find me in the training arena.”

You walked away, moving to prepare. Your robes, you switched out for more moveable, mission-like clothes. Black pants, tucked tight into brown, wrapped boot. Next came the long sleeved, brown undershirt, which had arm guards wrapped over top, then a darker, short sleeve top. A cloth, which looked like a long strip of bright red material with a hole dead center for her head. You slipped it over, each part hanging down past your knees. A thick, black belt held it all together, with a paler, brown cloth wrapped over top to hide a dagger sheath.

It was a lot of layers, and took you awhile to get on. The final touches consisted of the eye, which was tucked under the red cloth, and the brown straps to hold your staff. At your waist hung a small spellbook.

Stephen was meditating when you showed up.

“Good, you grabbed the book,” He never opened his eyes. “You will need it, seeing as you wont have access to the Sanctums where you are going.”

“Which was going to be my first question,” You said. “Where am I going?”

“1962, New York,” He said. “What do you know about mutants?”

~~~

“Come on, Alex,” Sean smirked.

The blonde shook his head, “I am not helping you push Hank off the roof as payback,” Alex pushed the redhead away.

“But he deserves a taste of his own medicine,” Sean was adamant that this was fair play, despite the slight flaw to his plan.

“Hank doesn’t have the ability to fly, Cassidy,” Alex stood from his spot on the couch, moving towards the exit to the sitting room.

“So? I couldn’t fly when he pushed me,” Sean snarked.

They walked through the almost empty halls of the mansion. Despite Charles’ claims that they would soon have students wandering the halls, it was still quiet even weeks after the incident on the beach. Charles hadn’t quite recovered yet, and those who still remained in the mansion were hesitant in thinking he ever really would.

From down the hallway, Hank turned the corner, Charles beside him in his wheelchair. Sean was about to open his mouth to snark at the tall brunette in a lab coat, when a commotion outside hit his ears. A glance out the window from the four pairs of eyes left them all speechless.

In the gravel of the driveway, to the right of the fountain, was carved out by a large crater. It looked like a meteor had hit, despite no previous signs, and no fire. From within the crater, a green glow spread out.

The four glanced at each other.

“Uh, Professor…” Alex whispered.

“I don’t know,” Was Charles' answer to the unasked question. “Let us find out, shall we?”

Outside, there was no scent of smoke or fire. Instead, a metallic tang on electricity hung in the air, the tingle setting everyone’s arm hairs on end. The light from within the crater faded.

A hand appeared, grasped onto the ledge of the crater. Their palms were caked in dirt, but the back of their hand was surprisingly clean.

From within the crater, you grunted, cursing out Stephen in whatever language came to mind--even the more ancient ones. With great effort, and the use of already sore muscles, you pulled yourself from the hole your impact into the year made.

Upon rising from with depths, you locked eyes witha group of very shocked men. You must’ve looked crazy, with your old-looking robes and metal-tippedstaff. The glowing green necklace probably didn’t help.

“Hi,” You said awkwardly, “One of you wouldn’t happen to be Charles Xavier, would you?”

One of the older members of the group, who was in a metallic wheelchair, raised a hesitant hand. You smiled, sighing.

“Great, that makes my job way easier,” You joked. “I’ll be quick, but I’m from the future, someone from my time is trying to change this past, and I’m here to stop it.”

The redhead, standing stock still in the front, choked out an odd noise. His eyes rolled into the back of his head, as he collapsed.

“...oops,” You shrugged.

When Sean Cassidy came too, he could’ve sworn he had died and gone to heaven. You hovered over him, a pale yellow light emitting from the sigils you created over him. You smiled, hesitant and almost guilty.

“Sorry about all that,” You said. “Didn’t realize how shocking it would be if I just unloaded all of that.”

You were in one of the many sitting rooms, Sean sprawled out on the ugly, floral print couch. His head hurt, but the pain was quickly subsiding with every pulse of light from the sigils.

“What…” He trailed off.

You followed his eyes, seeing the confusion, “Oh, I guess I explain to the others, but not to you. I’m a… magician, of sorts. These are healing spells, I hoped they would help.”

“Magic,” Sean whispered, eyes wide.

You nodded.

“Are you a mutant?” He asked.

With a laugh, you shook your head, “No, I was human, up until about a year ago,” You explained.

The symbols disappeared, a smile stretching onto your face, you mumbled an ‘all better’, before helping him sit up.

“I feel bad that I made you pass out though,” You said.

“It’s fine,” Sean smiled. “At least I have a good nurse.”

Alex came strolling in at that moment, the calm mood rupturing with his loud steps. His blonde hair, which had previously been combed and well kept, was now sticking up in odd places.

“Professor wants to speak with you,” Alex said to you.

You nodded, shooting one last smile to Sean, before getting up to leave. As you rounded the corner out of the room, Sean spoke up.

“Am I hallucinating?” He asked his friend.

Alex chuckled, patting him on the back harshly, “No,” He sent him a sly look. “You really did pass out in front of the pretty girl from the future.”

“God dammit.”

[walkingchemicalfire]

The Stray: Luca

Chapter 3

Continued from here

CW: blood, captured, violence, gun, bitterness to religion, burns

Soon the more shallow cuts began to close. He wondered absently if the cuts would scar. He’d never been cut with silver before and all other cuts had healed quickly and never scarred. Perks of being a werewolf of course. The silver was gradually running out of Luca’s bloodstream. The process burned and itched something terrible and Luca was growing restless. He shifted his shoulders to keep them from going too numb. There was a tingling running steadily through both arms that had started not too long ago, or at least what he thinks isn’t too long. It was difficult to tell in this plain as fuck torture chamber. There was no light other than the naked bulb hovering over him, the bulb that had not so much as flickered since the humans left him hanging here, literally.

His wolf sense is just on the outskirts of his mind, slowly but surely coming back to him. He’s able to look beyond the beam of light into the semi-darkness outside the cell bars. He can hear a steady drip drip drip against the rough stone. He could smell the mold and stagnant air in this prison. His strength is the slowest to return, but it’s getting there. He had been pulling on the manacles every few minutes, testing for any weaknesses or give. His wrists were chafed and tender but Luca knew his quick healing ability would fix that right up. Thank the fucking lord his bare feet were firmly on the ground and all his weight wasn’t ripping his shoulders out of their sockets.

“Although, I guess in a way I have the good fucking lord to thank for getting me into this mess in the first place.” Luca thought bitterly as he recalled Leader’s dumbass religious talk. What the hell did they want with his Pack? Something about cleansing the many? Honestly Luca was surprised the torture tactic wasn’t that speech alone, it sure was annoying enough. He had to get out of this hell hole and back to his family. They had been counting on him to drive the humans away.

Luca looked up at the attachment in the ceiling. The chain around the manacles was bolted into the ceiling. Even at full strength he doubted he could have yanked hard enough to pull the large screws and brackets from the stone. That left getting out of the thick metal locked around his wrists. Luca angled himself to get a better look at the contraption and snickered in delight at what he found. The wrist pieces were not connected together.

“Fuckin’ idiots.” Luca thought as he moved his left arm higher than the other so he could get a hold of the metal. He felt around for the clasp and his nails scraped along the groove. Evidently his wrists were bloodier than he had thought, the blood was slick along the metal and made it difficult for him to get a grip on the clasp. “C’mon, c’mon” His nails scraped along the metal, finally catching on the the rod going through the locked portion. As soon as his fingers made contact, they were on fire. Luca hissed and let go of the silver rod. “Hmm, smarter than I gave ‘em credit for, I guess.” He gave himself a second to breathe in before going at it again. Thankfully the rod slid out quickly once he got a hold of it. His arm dropped heavily to his side and he groaned as the joint relaxed. His fingertips were stinging but not enough to slow him down. Luca rolled his shoulder out as best he could before reaching up to release his other arm. This rod does not want to come out as easily as the first and Luca became frustrated as he fiddled with it. “Piece of shit human contraption, goddamn fuckin’ silver, let me out, you son of bitch.” Obviously the inanimate object does not respond, nor does it oblige his request. The rod is definitely stuck so Luca set his sights on a different route to freedom. He worked his fingers under the thick metal encircling his wrist and pulled. The metal began to bend outward in favor of the force he was using to manipulate it. His still trapped wrist flared painfully at the pressure. He ignored it as best he could, getting out was worth the temporary ache.

Eventually, Luca guessed he had pulled the manacle opened enough to get his hand out. He twisted his wrist to test how much wiggle room had been made. It was enough for his wrist to move but not enough to slip through easily. Twisting and pulling simultaneously had the irritated skin beginning to bleed once more. It hurt like a bitch but Luca used it as lubricant and just pulled harder.

Finally he was bunching his fingers together for the last tug. He reached his other hand up to pull the manacle off, forgetting about the piece of silver on it. His palm made full contact with the rod. Luca yelped and yanked his hand back. Fortunately that was just what he needed to get his still trapped hand the rest of the way to freedom.

“Well y’all had me goin’ with the silver but can’t stop me!” Luca laughed. He sat on the ground and ripped the hem of the pants he was wearing for two strips to wrap his wrists. He left the bloodied bandage still attached to his side alone. He could clean that up when he got back home. He stood and made his way over to the wall of knives.

“Shiitttt...” All the knives were made of silver. He touched the handle of one and jumped back from the instant burn. Luca groaned, thinking up his next move. He reached out for his wolf and could feel him lurking just out of reach. He tried to go into a Change and the cuts on his back alighted anew in agony. Luca dropped to the floor on his hands and knees and breathed through the onslaught. Stars flashed across his vision and he clenched his eyes closed. His ears started to ring and it took all his willpower not to to pass out. This is what silver does? Fuck. This was worse than being stabbed and relentlessly cut open with it.

Luca’s head was throbbing when he was aware enough to realize it. All that had consumed him was the raging fire that was his back. He had never felt this level of pain before. It was debilitating. It was shocking. It was....

Human

Luca gasped at the thought. Could that be possible? Leader did say they were on a mission to cleanse beasts, was this their plan? Using silver to cut him off from his wolf so effectively that he had no choice but to be human. He could lose his wolf entirely. Luca shuddered at that. No, that was his entire identity. His wolf was him and he was his wolf. They could not be separated. They would both die first. Together.

A loud clank pulled Luca from his thoughts and pain. He looked up to see the young baby-faced human from before pushing the cell door open. He stared wide eyed at the hanging manacles that had restrained the werewolf last time he was in here. Luca didn’t make a sound but soon enough the human had zeroed in on him and pulled out a handgun from his hip holster. The two stood off, waiting for the other to crack first. Luca watched the human and recognized the nervous twitch of his eye, his stuttering breathing pattern, and his heart was beating so wildly Luca could see his chest thumping from his distance.

“I don’t want to hurt you.” Luca said, standing slowly and raising his arms halfway with his palms out.

“You hurt William.”

“Well his ear just looked too appetizing. And he offered it up so kindly it would’ve been rude of me not to try a bite.” Luca couldn’t help the sarcastic retort from slipping out.

Young One just stared at him. Luca sighed “What’s your name, kid?”

“Peter, and I’m not a kid.”

“Yeah tell that to your baby face, Petey.”

Peter’s expression hardened and he adjusted his stance slightly, aiming the gun more steadily but his hands were still shaking. Luca raised a brow. “Those shakes you got are not gonna help either of us. You aiming to slow me down and you’ll slip. You’ll get in trouble for accidentally killing me and I’ll be dead. So how ‘bout I slip past you and you say you never saw me?”

Pete was already shaking his head before Luca had even finished. “No, no I can’t do that.”

“C’mon Pete, I wasn’t lyin’ when I said I didn’t want to hurt ya. You’re young and can still make the right choice here.” Luca began to slowly move to get around the human and to the still open exit. “No harm, no foul.”

“S-stop!” Peter stuttered and Luca decided on a different approach.

He steeled his gaze. “Peter, don’t make me hurt you to get out of here. I’m leavin’ one way or another. If you get hurt in the process is your decision.”

The kid seemed to think about it for a moment. It was all Luca needed. He rushed forward and yanked the gun from Peter’s grip while kicking his legs out from under him. The human hit the ground hard and let out a loud shout.

Luca bolted for the door and smacked directly into a giant. No seriously, a giant. There weren’t many people larger than Luca, werewolves included, so this human had to be a direct descendant of Sasquatch. He smacked Luca away with one hand, sending him and the gun careening in opposite directions, and sidestepped into the room.

“What the fuck are you?” Luca snarled at the newcomer.

The giant smiled, exposing a horrendously ugly set of rotten teeth. “I’m your worst nightmare.”

Luca immediately guffawed “A fuckin’ cliche? Seriously?! Shit, you humans are way more disappointin’ than I thought!”

Sasquatch shrugged a huge shoulder. He bent to retrieve the gun and aimed it at Luca’s head, much more steady than Peter. Luca opened his mouth to say something that he hoped would not get him shot but would probably get his lights punched out at least, but nothing came out before the giant fired.

Tag Team: @whump-tr0pes @sableflynn @whumpywhumper @0idril0 @cursedscribbles @mymoon199 @endless-whump @insanitywishes

[kyoupann]

In the spirit of the holidays... How about Four celebrating Yuletide in Minish Village? I'm sure the Minish would have a lot of fun and unique traditions! And you could come up with fun traditional foods for them too. Roasted acorns! Mulled berry wine! Grilled seeds! There's lots of room for creative worldbuilding and warm, cozy wholesomeness. ☺️🥰 (What would Minish Village even look like, all covered in deep snow? Maybe they tunnel through it and build burrows in snowdrifts? :DD)

Technically speaking this was already written before requests were open, so it should’ve been one of first fics to come out. But sadly, this was one of the files that got lost during my pc reset so I had to rewrite it.

It’s not exactly what you asked for, but it’s still a Minish holiday I started planning at the beginning of December c: It’s technically pre-LU, so basically it’s just baby Four one year after the events of the Minish Cap! (:

With the first snowfall of the year just around the corner, Minish Village is bustling with energy. Little paws leave imprints in the faint layer of snowflakes covering the road. Link is surprised to see the little creatures running in and out of mushrooms and pots, carrying a variety of items: dry leaves, twigs, chipped metal, about anything that could be considered rubbish at first glance. Everything is being piled outside each house.

“What’s all this?” Link asks and points at a pile of pure metal scraps. Random bits of jewellery sticking from it

Chikari, the Minish sorting through the pile, perks his ears at the voice, immediately recognising it, “Oh, Hero! Hello, hello!” he greets, jumping to his feet as if his excitement couldn’t be contained in such tiny body.

“It’s for the Bells for Joy!” he shouts, extending his arms to the skies, a big grin adorning his face. “The best of my collection!”

The look on Link’s face must have given away that he had no idea what the Minish was talking about, earning a gasp from the little creature.

“Mr. Hero! You don’t say you don’t know what Bells for Joy is!”

That alone was enough to gain the attention of all the Minish in proximity. Now surrounded by excited and curious chirpings, Link feels his cheeks warm up in what he thinks is embarrassment but would rather like to blame on the cold.

“I’m afraid I don’t,” he admits, a nervous laugh escaping him.

What he thought would cause the Minish to feel bad actually puts an even bigger smile on their faces. Some of them even bumping shoulders and linking arms in signs of victory. Link is more confused than before.

“The snow makes it difficult for us to move around and hide goodies,” Chikari explains.

“That’s right! It’s so hard!” A Minish in the multitude shouts.

The other Minish shush him and Chikari continues, “we won’t be able to see you humans for two months. We have to store energy to last us that long!”

The crowd explodes, chanting gibberish in excitement.

“So we do a bunch of good stuff before the snow comes!”

The name still doesn’t make much sense to Link, but he still nods.

“so, what are the bells for?” he asks, pointing to the pair of bells attached to Chikari’s belt.

For the first time, he sees the little creatures go silent in contemplation. They look one another, asking silent questions and giving nods as answers.

“I guess, since you are already one of us, we can tell you!”

“Yeah, he should do it too!”

“Oh, I’m ready to head out to Hyrule Town,” Chikari says and turns to Link. “You could come with me and experience it yourself!”

The crowd cheers and all eyes turn to him, expectant and more excited than before.

Still confused, but with more information than when he arrived, Link agrees. The little creatures look ecstatic that he will be joining them, some of them even shoving most of the items from their own piles into their little sacks to head out as well.

--

The first house they visit they notice it has a hole in the ceiling, so they fix it as quietly as possible, which is not saying much with every Minish squeaking in excitement. In less than an hour, the hole is no more; it’s not perfect, but it’ll hold well until the owner can afford to repair it.

“Now comes the fun part,” Chikari says, the smile on his face barely allowing him to talk.

They are standing on the rafters, looking down at the main floor where the family is having lunch. Chikari unclips the bell from his belt and rings it vigorously. He  immediately hides behind the rafter, and when Link doesn’t do the same, he tugs him down with him. Chikari brings his index finger to his lips and cocks his head to the floor below.

“Mama, what was that?”

“Looks like we had a visitor while we weren’t home,” say the young woman at the head of the table.

The pair of children look up to where their mother points; where there used to be a hole, now was a sort of bird nest covering it.

“Haven’t I told you about the bell?” the woman slumps back on her seat and brings a hand to her chin as if trying to remember something, “you see that big bell in town? They say that something big will happen when Hyrule's bell rings."

The kids look at each other in surprise. They jump out of their seats and run to their mother’s side. Back on the rafters, Link finds himself mouthing the old legend along with the lady. Of course, the Minish would be behind this as well.

“Tell us more!”

She lets out a laugh and nods, “if you hear bells ring, look around and chances are that something good has happened,” she takes a moment to let the kids process the information, “it might be small, but it’ll be good. Now, if we get these small good things from small bells, imagine what would happen if that big bell rang.”

The children gasp, their minds starting to spiral into their own fantasies.

“It would rain Rupees!”

“We’d meet a Picori!”

“We’d get a dog!”

The mother laughs wholeheartedly, “that’s enough, go finish your food,” she lightly pushes them towards their seats.

Back on the rafters, Link’s mind is going through every memory of hearing the chime of bells at random times during the winter, and while he remembers many instances, he never made the connection between the sound and the favour. He can’t imagine himself being that oblivious anymore.

They spend the day going from house to house, fixing what needs fixing, and if there is nothing to fix, they leave one of the goodies from their sacks: rupees, kinstones, rings, pendants, screws, nuts; it all depends on what they think the owner would like, and then, they ring their bells and run to hide and watch their reactions.

Link notes how the Minish visibly vibrate with more excitement after each person they help; by the end of the day, they are hardly able to efficiently hide from the humans, clumsily tripping on their own tails while running away. It reminds him of kids who had just had too much sugar before bed.

As soon as they get back to Minish Village, they are met with trails illuminated by the faint glow coming from mushroom heads hanging from above. These replace the glowing flowers that would be otherwise up the rest of the year, but the increasing cold strips them from their life; they aren’t useless by any means, the Minish find use for them at the bottom of a little barrel, where they let them ferment with other leaves and berries until the first colours of spring paint the land.

It seems every Minish that had left that day is returning, and as they enter the village, they all line up to tie their bells to a string. Once the string is full with fifteen or so bells, they are tied to one of the many arches throughout the village, creating beautiful curtains of gold that dance and sing with the winter breeze.

And Link, with all the wonder and curiosity of a 9-years-old, can’t help but marvel at something so simple, yet so astoundingly pretty. The air is beginning to eat at his bones; still, he feels strangely warm inside. A pang of nostalgia echoes in his heart as he observes Minish dancing and skipping hand in hand to their homes; how he wishes Ezlo were there with him...

Chikari jumps on him, squeezing him into a crushing hug and bringing him out of his thoughts.

“I hope you can join us for the Ball of Bells!”

*****

Quotes from the Minish Cap that inspired this 2-part-holiday thingy:

"There's an old legend that something big will happen when Hyrule's bell rings." (I ignored the second part of this because I can)

“You see, we thrive on making humans happy. It gives us energy. But we only do it in secret!”

Also, my journal entry if anyone’s curious:

My conclusion: the Minish get fucking high on anonymity, pass it on.