#Yize Mould

[yizemold]

Dongguan mould part manufacturer Yize is going to Japan for exhibition

At present, the die and mould industry has fallen into a depression. If enterprises want to survive, they must enhance their own strength and keep pace with the times. Therefore, Dongguan mould part manufacturer Yize will send representatives to Japan to participate in the exhibition, aiming at learning advanced foreign production technology, introducing advanced production equipment, and opening up a larger overseas market.

This exhibition in Japan is an opportunity as well as a challenge. Dongguan mould part manufacturer Yize hopes to attract more like-minded partners and establish long-term cooperative relations through this opportunity. To contribute to Chinese mold industry. To this end, we are doing a series of preparations.

In 2019, it will be the year of innovation for Dongguan mould part manufacturer Yize. In addition to ensuring the quality and delivery date of the mould products, we also need to constantly improve, learn and innovate. We hope that everything will go smoothly in this exhibition in Japan.

yize33ka

Above article from yize official website (http://www.moldpart-manufacturer.com/)

The original address:(http://www.moldpart-manufacturer.com/News-Center/4695.html)

[chinainjectionmold]

Know more about LCP plastic injection molding parts

eriomoldwfuiqLCP plastic injection molding parts materials are semi-crystalline polymers with excellent heat resistance and flexibility, generally exhibiting liquid crystallinity in the molten state. The knowledge about precision injection molding of LCP plastic injection molding parts materials is as follows:

1. LCP plastic injection molding parts precision injection molding process:

①The molding temperature range [280-360 degrees] is different according to the grade temperature

② Baking temperature and time [150 degrees]/4-6 hours

③ Mold temperature 【30-150 degrees】

④ The injection setting pressure adopts low pressure and medium and high speed

2. Attention should be paid to the following issues when precision LCP plastic injection molding parts:

①In order to make the feeding more accurate and stable, proportional back pressure is usually used;

②Large products can use large back pressure, and small products can use small back pressure;

③High-sensitivity injection system and automatic V-P (V injection pressure, P holding pressure) conversion function, so that the product is precise and stable. In the case of need (such as the product is very precise), it is recommended to install a pressure sensor at the gate of the mold cavity. Make V-P switching closer to reality;

④If the machine is shut down and restarted, the waste needs to be ejected;

3. LCP plastic injection molding parts and molding cycle

The molding cycle depends on the size, shape, thickness, mold structure and molding conditions of the molded product. Because of its excellent flow, LCP has a fast fill time and a fast cure time, so we can get shorter molding cycles.

4. Scope of application:

The application of LCP materials is centered on heat-resistant electrical and electronic components, and can be involved and applied to a wide range of fields.

Including terminals, plugs and sockets, coil bobbins, resistors, relays, fuse parts, motor parts, radio parts, printed circuit boards, IC manufacturing equipment parts, lighting parts, etc.

As the plastic injection molding parts manufacture, Yize Mould has a professional engineering team, sophisticated thermoplastic material development technology, precision injection molding, precision injection molding, plastic injection molding parts service, and a commitment to total quality management.

https://www.yizemould.com/newsdetail-901.html

eriomoldwfuiq

[chinaspritzgussformen]

Intravenöses Kolben-Dreiwegeventil Medizintechnik spritzgussformen Komponenten Projekt

Medizintechnik spritzgussformen komponenten aus Kunststoff müssen nicht nur die Verwendbarkeit garantieren, sondern auch eine solide Struktur und ein schönes Aussehen haben.

Was ist ein venöses Kolben-Dreiwegeventil?

Die drei Verbindungen des Dreiwegeventils stehen jeweils mit dem Nadelsitz der Bluttransfusionsvorrichtung, dem Nadelsitz der Blutantikoagulationsvorrichtung und der Venenpunktion und Kanüle durch den medizinischen Gummischlauch in Verbindung.

Bei Yize Mould verfügen wir über Ausrüstung für Medizintechnik spritzgussformen komponenten. Dieses Projekt unterstreicht unseren Durchbruch bei medizinischen Kunststoff-Spritzgussgeräten und garantiert gleichzeitig ein Spritzgießen mit engen Toleranzen, was Kosteneinsparungen über den gesamten Produktlebenszyklus entspricht.

Entwurfswinkelanalyse

Entwurfswinkelanalyse über medizinisches

Dickenanalyse

Die Wandstärke des Produkts bezieht sich auf den Leimgehalt des Teils.So verwenden Sie UG, um die Wandstärke des Produkts zu analysieren?Nachdem Sie ein Modell erhalten haben, bevor Sie sich auf das Design von medizinischen Kunststoffspritzgussgeräten vorbereiten, ist es notwendig, zuerst die Wandstärke zu analysieren, um dies zu sehen Wenn die Wandstärke gleichmäßig ist, finden Sie ihre ungleichmäßige Position, um Anpassungen vorzunehmen, um zu vermeiden, dass das Produkt während der Lebensdauer des Produkts durch die Wandstärke verursacht wird

Montageabmessungen (Dichtungsanforderungen)

Die Leimposition in der roten Position ist dicker.Wenn es sich um eine kritische Toleranzgröße handelt, achten Sie auf das Größenrisiko

Medizintechnik spritzgussformen komponenten Produktkonstruktionsanalyse

Produktrohstoffauswahl, Produktdesign (z. B. Produktstruktur, Funktionskonformität, Formenbau und Machbarkeitsanalyse für die Produktinjektion)

Oberflächenbehandlung von Produkten

1.polieren

2. Dünne Feuerstruktur

3. Textur

4. Beschichtung

5.Sandstrahlen

Medizinisches Kunststoff-Spritzgussgerät Füllanalysen

Die Füllanalyse prognostiziert den Fluss von thermoplastischen Polymeren innerhalb der Form während der Füllphase. Die Analyse berechnet die Fließfront schrittweise am Teil vorbei von der Einspritzstelle. Der Fluss wird bis zum Geschwindigkeitsdruck-Umschaltpunkt fortgesetzt

Position der Schweißlinie

Diese Verbindung ist nicht so stark wie eine ununterbrochene Strömung.Da die Strömungsfronten miteinander verschmelzen und weiter durch den Hohlraum fließenkönnen, besteht eine größere Chance, dass dieser Bereich komprimiert wird,wodurch seine Festigkeit erhöht wird.

Füllungsanalysen

Die Füllanalyse prognostiziert den Fluss von thermoplastischen Polymeren innerhalb der Form während der Füllphase. Die Analyse berechnet die Fließfront schrittweise am Teil vorbei von der Einspritzstelle. Der Fluss wird bis zum Geschwindigkeitsdruckwechselpunkt fortgesetzt.

16+ Jahre 180 Ausrüstungssätze 10000 Klasse Reinraum OEM ODM hochpräzise Medizintechnik spritzgussformen mit mehreren Kavitäten, Spritzguss für medizinische Geräte sowie Schalen und Schalen für medizinische und Laborgeräte usw., die in der Gesundheitsbranche verwendet werden.

acacyzmold

[yizemold]

Yize Mould Japan Exhibition Achieved Complete Success

Recently, Yize Mould sent representatives to Nagoya, Japan, to attend the INTERMOLD 2019, which achieved complete success.yize44ka

Following is the relevant content of Yize Mould Japan Exhibition:

The Japan International Mold Exhibition (INTERMOLD) is sponsored by the Japan Mold Industry Association. It is strongly supported by the Ministry of Economy and Industry, the Ministry of Foreign Affairs, the Nagoya Municipal Government, the Nagoya Chamber of Commerce and Industry, and the Japan Trade Revitalization Association. The exhibition is held once a year in Nagoya and Tokyo, respectively.

Yize Mould Japan Exhibition aims to expand our international market. Before that, Yize Mould exhibition group also participated in the American International Mould Exhibition, hoping to show Yize's strength to the world and seek opportunities for cooperation from all over the world.

Yize Mould Japan Exhibition has not only graphic and text introduction, physical display, but also audio and video display. Perform live operations at the same time as the exhibition, so that visitors can observe and communicate at the scene.

Through the exhibition Yize more intuitively understand the cutting-edge information of the mold industry and mold technological innovation, exchange with people in the international industry, absorb its essence, so that we can return to China to better improve and innovate our mold manufacturing technology, for China's mold manufacturing level to the international first-class efforts!

yize44ka

Above article from yize official website (http://www.moldpart-manufacturer.com/)

The original address:(http://www.moldpart-manufacturer.com/News-Center/4757.html)

[yizemold]

Congratulations to the new trainees of Yize Mould on becoming a regular worker

In order to select more suitable mould parts, it is necessary to select according to specific requirements. So, how much do you know about the purchase requirements of precision plastic mould parts? Yize summarizes the following points for you:

1.Read the instructions to see if they are equipped with installation instructions and maintenance procedures, etc.

2.Interchangeability of parts, the ability to change the previous version in time when the supplier's part design has changed

3.Product quality stability and traceability, precision plastic mould partssuppliers must have relevant quality stability records, and track any products they produce.

4.Product price, you need to ask if the product price includes tax and freight

5.ISO Certified or not

Above are some common purchase requirements of precision plastic mould parts. There is a supplier of precise mould parts---Yize Mould, which meets the above requirements. we hope you can select suitable plastic mould parts.

yize40ka

Above article from yize official website (http://www.moldpart-manufacturer.com/)

The original address:(http://www.moldpart-manufacturer.com/News-Center/4715.html)

[yizemold]

Yize Mould Continuously Launches Reading Club Activities

In order to enrich the spiritual world of employees, we need to learn through a variety of ways. Since 2018, Yize Mould has been carrying out the reading club activities continuously, and all the staff have exchanged their feelings together.

In the past year, we have read many philosophical books of Inamori Kazuo, such as Kyocera Philosophy, Living Law and Dry Law. Through learning, employees have gained a lot and can sum up many philosophical principles through their ordinary work and life. We share and grow together, more and more like a family.

Starting from the end of April, Yize Mould Reading Club began a new content - bring up one's children properly. Hope all the staf can get along well with your family and children and have a good family atmosphere while doing a good job.

It's never too old to live and learn. The connector mould part manufacturer Yize reading club activities will go on all the time, because only by continuous learning can we make continuous progress and development.

yize40ka

Above article from yize official website (http://www.moldpart-manufacturer.com/)

The original address:(http://www.moldpart-manufacturer.com/News-Center/4710.html)

[yizemold]

European and American Customers Visit Yize Mould

March 29, 2019, European and American customers to our company for a one-day visit. General Manager Yang and business representatives warmly received and attended the forum.

First of all, the two sides have carried out in-depth discussion and exchange on cooperation in recent years and the cooperation of the new projects in the future. The business manager, on behalf of the company, expresses its appreciation for the long-standing support and trust of our customers, and then introduces the recent developments of our company and the business expansion. The representative of the customer indicates that our business philosophy is in line with their requirements, and hope to continue to cooperate and win-win.

Mould part manufacturer YIZE attaches great importance to the cooperative relationship with customers, and hopes to further improve the cooperation level of both sides in the future, develop together, and provide customers with better service.

The picture shows the representative of our company taking a photo with customers in Europe and the United States.

yize33ka

Above article from yize official website (http://www.moldpart-manufacturer.com/)

The original address:(http://www.moldpart-manufacturer.com/News-Center/4694.html)

[yizemold]

Yize Mould Management Conference - Become a Qualified Leader

Yesterday, Yize Mould held a business meeting on "Becoming a Qualified Leader", in which all the leading cadres of the company attended. Next, let's take a look at the details of the meeting:

This business conference mainly covers five aspects:

1. Twelve Rules of Management

2.Creating new business

3. Qualifications of leaders

4. Seven Key Points to Mobilize Employees' Initiative

5.The Requirements of the Core Leaders

Enterprise leaders are the main force of an enterprise and an important part of the whole company. We hope that through this meeting, leaders can have some insights and convey the correct business philosophy, and with all employees will work together to create new undertakings.

yize31ka

Above article from KENOS official website (http://www.moldpart-manufacturer.com/)

The original address:(http://www.moldpart-manufacturer.com/News-Center/4684.html)

[yizemold]

YIZE Mould wishes you a happy New Year!

Today is the Chinese New year, Yize Mould here to wish everyone a safe and healthy New year with the flow of wealth and happy family!

Here, we would like to express our sincere thanks to our partners and industry friends who have given us strong support. We will continue to work hard to summarize our experience and shortcomings, and provide more advanced and high-quality die parts for our customers. Thank you all for accompanying Yize year after year, 2019, and continue to move forward with dreams!

2019 is full of hope, let's welcome the brand-new 2019 together! Happy New Year to you all again!

yize26ka

Above article from KENOS official website (http://www.moldpart-manufacturer.com/)

The original address:(http://www.moldpart-manufacturer.com/News-Center/4661.html)

[chinainjectionmold]

Why use the PPS plastic injection molding parts?

PPS: Polyphenylene sulfide, referred to as PPS, is a new type of high-performance thermoplastic resin. Special engineering plastics are widely used after filling and modification. At the same time, PPS plastic injection molding parts can also be made into various functional films, coatings, and composite materials, which have been successfully used in electronic appliances, aerospace, automobile transportation, and other fields. However, PPS is rarely used alone because of its brittleness, and PPS is mostly used for its modified varieties, such as glass fiber reinforced PPS, glass fiber reinforced PPS, carbon fiber reinforced PPS, etc. Its advantages are:

1. It is only one-seventh the price of PEEK material.

2.PPS material can withstand high temperature of 220℃.

3. PPS plastic injection molding parts material has good performance in wear resistance, toughness or corrosion resistance.

4. PPS precision injection molding material has excellent flame retardancy.

5. PPS plastic injection molding parts has excellent electrical insulation, especially high-frequency insulation.

Yize Mould has rich experience in precision plastic injection molding parts of various special engineering plastics such as PEEK, LCP, PEI, PPS, PPSU, PFA, etc., which has laid a solid foundation for us to win the strong support and trust of our customers.

https://www.yizemould.com/newsdetail-900.html

eriomoldwfuiq

[chinainjectionmold]

What are the principles and design standards for Custom Medical plastic injection mold material?

eriomoldwfuiq

Design standard Custom Medical plastic injection mold material selection principles:

The first point: the selection of materials must meet its use function in the mold;

The second point: Under the premise of meeting the first point, consider the cost factor and the mold type to select the appropriate material.

The following are Custom Medical plastic injection mold that standardized on different mold parts and deal with different precision requirements.

Custom Medical plastic injection mold using is mainly divided into four parts: Moldbase, Insert bolck, Insert , Slide Component

Moldbase:

(1). Cavity plate & core plate

Common materials: P20, 618HH, 718HH

Use hardness: N/A;

When the precision of the template is very high due to product factors, it can be used: M310, RAMAX, using hardness: N/A

(2). Core back plate & ejector back plate

Common materials: P20,

Use hardness: N/A;

Use when there are certain performance requirements: 618HH, 718HH,

Use hardness: N/A.

(3). Top & bottom insulation plate

Common materials: GLASS FIBBLE,

Use hardness: N/A;

(4). Other templates except (1) (2) & (3), such as Top & bottom insulation plate, Ejector plate, support bolck, etc.

Common material: S50C, use hardness: N/A;

Use when there are certain performance requirements: P20, use hardness: N/A.

Insert block:

(1). Insert block.

Common materials: 1.2083,

Use hardness: 52-54HRC;

When the performance requirements are high, it can be used: M310, STAVAX,

Use hardness: 52-54HRC

(2). Insert  Back Plate

Common materials: 1.2083,

Use hardness: 52-54HRC;

Can be used when performance requirements are not high: 8402

Use hardness: 50-52HRC.

Insert :

(1). Insert Participate in product forming.

Common materials for common requirements: CALMAX,

Use hardness: 54-56HRC;

The workpiece is a slender type that is expected to be easily broken in production or has an Insert  designed for insertion.

Commonly used: VIKING, W360,

Use Hardness: 56-58HRC,

For higher requirements or use: K390,

Use hardness: 60-62HRC

(2). Insert  that does not participate in product molding.

Common materials: 8402

Use hardness: 50-52HRC;

Component:

(1). Mould Component

1) LocatIon Ring

Commonly used: S50C,

Use hardness: N/A;

2) Sprue Bush

Commonly used: SKD61,

Use hardness: 48-52HRC;

3) Support Pillar

Commonly used: S50C, 618,

Use hardness: N/A;

4) Stopper

Commonly used: S50C,

Use hardness: N/A;

(2). Slide Component

1) Slide Cam Hold

Commonly used: XW-10,

Use hardness: 58-60HRC;

2)Angle Cam

Commonly used: XW-10 (56-58HRC), or use: 8402 (50-52HRC);

3) Guide Rall & center Guide

Commonly used: XW-10 (56-58HRC), or use: 8402 (50-52HRC);

4) Pressure Pad

Commonly used: XW-10 (56-58HRC), or use: 8402 (50-52RC);

5) Wear Plate

Commonly used: XW-10 (56-58HRC), or use: 8402 (50-52HRC);

6) Cover Plate

Commonly used: 8402 (50-52HRC);

Material usage principle: parts that have a moving relationship with each other must use different materials;

If the same material is required, reduce the consumable replacement parts by 2HRC.

Yize mold is specialized in Medical plastic injection mold production with 180 sets of production equipment for 16 years, we are a world-leading thermoformed of highly aesthetic, complex medical device mold and products in the Medical plastic injection mold industry. We focus on manufacturing small precision, multi-part enclosures for the medical device industry.

we pay attention to offering the One-stop Solution design, engineering, manufacturing, assembly of Medical plastic injection mold.  To seek high precision and control medical injection mold quality and molding quantity, we set up from 30ton to 150ton professional plastic injection machine workshop.

Yize engineer team's diverse experience and knowledge enable the development and manufacturing of advanced medical devices. and design to create customizable solutions for each of our clients.

Precision mold design and manufacture and mold parts processing, precision mold accuracy 0.003mm, injection tolerance 0.02mm. Not only provide the Medical plastic injection mold, but also we gain breaking areas of others.

Main precision: precision connector mould, precision medical mould, precision Teflon mould, precision plastic mould.

eriomoldwfuiq

https://www.yizemould.com/newsdetail-857.html

[chinainjectionmold]

Future development of connector mold parts is huge

https://www.yizemould.com/newsdetail-883.htmleriomoldwfuiq

With the rapid development of new energy vehicles in recent years, China's local wiring harness connector mold parts suppliers have taken the lead in entering the new energy vehicle supply system by virtue of their good supporting relationship with independent new energy vehicles. Some high-quality wiring harness connector mold parts companies have achieved technological breakthroughs in the field of high-voltage wiring harnesses

The connector mold parts have huge potential for future development

The automotive wiring harness industry is highly dependent on the automotive industry. Most OEMs have their own relatively mature and stable automotive supporting systems, especially international automotive companies represented by German, American and Japanese systems.

Connectors have high requirements for the mold manufacturing industry: First, a high level of mold design is required. Due to different shapes of terminals, connectors have different structures. It is very important to carry out reasonable design. If the structure is unreasonable, the product will be unqualified. .

Strict assessment of parts suppliers and their long-term high standards for parts make the combination of automotive wiring harness suppliers and automotive companies relatively stable

In the future, the requirements of connector terminal molds are getting higher and higher, which is due to the trend of miniaturization of connector interface and high data transmission rate.

Connector molds involve injection molding, terminal stamping, electroplating, etc. Guosheng mainly produces terminal injection molds, including circular electrical connectors and rectangular electrical connectors. Circular electrical connectors are used in military equipment (aviation, aerospace) due to their structural characteristics.

Connector Mould company Yize is mainly for high-end fields, mainly for international connector manufacturers such as AMP, Molex and other well-known manufacturers.

Article reprinted to：https://www.yizemould.com/newsdetail-883.html

eriomoldwfuiq

[chinainjectionmold]

Introduction to the characteristics of Teflon plastic injection mold molding material plastics

When we decide on the Teflon plastic injection mold molding material of the product, whether to choose metal or Teflon plastic injection mold molding material, there will be many considerations. In addition to the price factor, we also need to understand the characteristics of metal and plastic. So what are the characteristics of plastic, and what are the advantages and disadvantages?

(1) Teflon plastic injection mold molding material of advantages

①Most plastics have strong corrosion resistance and do not react with acids and alkalis.

② Plastic manufacturing cost is low.

③Durable, waterproof, and lightweight.

④It is easy to be processed into products of different shapes.

⑤ Good insulator.

(2) Teflon plastic injection mold molding material Disadvantages

① When recycling waste plastics, sorting is very difficult and economically uneconomical.

②Plastics are easy to burn and produce toxic gases when burned. For example, when polystyrene is burned, toluene is produced. A small amount of this substance can lead to blindness, vomiting and other symptoms when inhaled. PVC burning will also produce toxic gas of hydrogen chloride. In addition to burning, high temperature environment will cause plastic to decompose toxic components, such as Benzene etc.

③Plastics are made from petroleum refining products, and petroleum resources are limited.

④Plastic will not rot even if it is buried in the ground for hundreds, thousands or even tens of thousands of years.

⑤ The heat resistance of plastic is poor, and it is easy to age.

Due to the inability of plastic to degrade naturally, it has become the number one enemy of human beings, and it has also led to the tragedy of many animal deaths. A large amount of plastic waste and marine plastic is already a problem that mankind needs to face together.

Yize Mould is a professional teflon plastic injection mold manufacture, providing the whole process service from mould design and manufacture to injection mould test and injection processing. The main products are connector molds, medical parts molds, micro precision molds, Teflon injection molds, PTFE injection molding processing, 100,000-level dust-free workshops, and factory direct sales.

YzmoldpartsYze

[chinainjectionmold]

How to get Medical plastic injection mold manufacturer information remotely

In the face of strict customs control, customers want to see the factory, how should the Medical plastic injection mold manufacturer respond?

Medical plastic injection mold manufacturer will usually chiose inviting customers to visit the company is the most direct way to allow customers to observe the actual environment of product production more directly and effectively, and to dispel customer concerns.

During the epidemic, due to strict prevention and control measures, it was difficult for foreign customers to enter China for on-site inspections, so Medical plastic injection mold manufacturer Yize how to deal with this situation?

We give two solutions:

1. Please ask foreigners or Chinese people in the same industry who are resident in China to go to our company to conduct surveys. As notaries of both parties, it can guarantee and enhance confidence to a certain extent. At the same time, live video and record it in real time.

2. Under the circumstance that the epidemic situation is effectively controlled, we will take isolation measures and test nucleic acid in compliance with the relevant prevention and control requirements of China Customs. If the customer meets the entry requirements, we can arrange relevant personnel to visit the factory site for inspection.

This approach allows customers to feel our ability to prevent and control the epidemic, and believe that our company can stabilize and guarantee the production of products and deliver the goods within the specified time.

In fact, we have tried both of the above methods. Recently, the first method has been recognized by Spanish customers. He asked his trusted friend Helen to visit our company and take pictures in time. We are very welcome.

Answer the customer's most concerned questions for Medical plastic injection mold manufacturer：FAQ

F: What type of company are you?

A: We are a Chineser manufacture integrating accessories and mold injection on medical plastic injection mold market.

F: Who is your partner?

A: We provide mold accessories, mold production, injection molding services for Tyco, FCI and other companies.

F: What customized services can be provided?

A: Mold design, DFM can be provided, mold design can be carried out according to customer's injection equipment.

F: What are the production standards for molds?

A: Comply with European HASCO standard.

F: How long is the production cycle of the mold?

A: Domestic customers are generally within 30 days, and the overseas cycle is generally 30-45 days.

F: What are the shipping options available to us?

A: We generally choose DHL or other shipping channels according to customer needs.

F: What is the mold life?

A: We guarantee that the mold life is 100w-200w times.

F: Are there any requirements on how to deliver the amount?

A: Mould delivery ratio: 4:4:2 (40% deposit, 40% after customer product quality confirmation, 20% after mold arrives at customer address and complete acceptance).

YzmoldpartsYze

[chinainjectionmold]

Medical plastic injection mold process about mold Slide

YzmoldpartsYze

The slider is a mold component that can slide perpendicular to the mold opening and closing direction or at a certain angle to the mold opening and closing direction during the mold opening action of the mold. In Medical plastic injection mold process , the slider is installed with a positioning device, and the positioning device must be flexible and reliable to ensure that the slider does not move in place.

1.Two Medical plastic injection mold process types should pay attention to size control.

As shown below:

2. Design dimensional tolerance control of central guide rail and non-central guide rail--Pay attention to distance

As shown below:

3. The tolerance of the sliding block and the mold core is guaranteed to be 0.005-0.01mm on one side, which can not only avoid wear, but also facilitate preloading.

As shown below:

4. If there are steps between the slider and the mold core, the C surface must be used as a guide.

5. Oil tank processing of sliders and movable parts (refer to DS29 for specific oil tank design parameters). The oil sump is designed in a closed form.

(1) Slide block wear block and pressure block self-lubricating material selection:

1) high strength brass

2) CAC304 is inlaid with MoS2; other slider materials refer to DS24 standard

6.Medical plastic injection mold process of slider Key points: The sliders on the heaven and earth side, especially the large-sized sliders, need to prevent the positive slider from falling off due to its own weight, which will lead to the die. Positioning lock blocks and protection springs need to be set. Proximity sensor and protection thimble must be set according to the actual situation.

7.Guide rod

8. Precautions for glass bead design:In the following cases, the positioning slot size design leads to positioning failure

9. The design of the protective needle of the slider

10. Slider wear block screw selection:

Understand the mold slider (row position) structure, easy demoulding! Yize Mould grasps every detail and buys more time for customers. At the same time, we can also better improve our technology to achieve a win-win situation.

We are repeatability –Equipped with Medical plastic injection mold machine manipulators 24 hours to maintain production

We pormise accuracy – Plastic injection molding parts accuracy 0.003mm, injection 0.02mm.We can be produced to a tight tolerance consistently

YzmoldpartsYze

This article is reproduced to:https://www.yizemould.com/newsdetail-830.html

[chinainjectionmold]

What is the impact of standard injection Mold spare parts on mold production?

Mold production technology is becoming more and more standardized. At the same time, standard injection Mold spare parts are standardized. Among injection molding molds, the most widely standardized mold base is widely recognized by the market.

Our company's mold base is unified by Long Kee For the mold base, we also have our own standard injection Mold spare parts. The following points should be in line with the following opinions:

1. standard injection Mold spare parts, good machining performance, easy to cut, and still maintain accuracy after machining

2. The polishing performance is good. Most of the working surfaces of the formed parts need to be polished to achieve mirror polishing. Therefore, the hardness of the steel is required to be between HRC35-40. Too soft and too hard steel is not conducive to the work of the polisher

3. Good wear resistance and fatigue resistance. The injection molding cavity will be subjected to high pressure and high temperature for a long time. The high carbon alloy steel will be heat treated to obtain higher hardness, but the toughness should be poor to form surface cracks. Even if the selected steel has strong wear resistance, it should avoid long-term mold repairing and polishing to ensure the dimensional accuracy of the cavity and ensure the service life of the mold.

4. It has corrosion resistance, sometimes corrosive plastic particles, such as polyvinyl chloride and flame retardant plastics, are injected into the injection molding cavity

Yize Mould focuses on connector moulds, plastic moulds for small parts, plastic moulds for structural parts, precision plastic moulds for plastic parts products,and 125 employees, 180 sets of equipment and professional injection Mold spare Parts & Accessories,EDM accuracy and Tolerance 0.003mm

This article is reproduced to：https://www.yizemould.com/newsdetail-805.html

yizealisassa