#Washable & Reusable aluminum mesh filter *1

[vividracing]

New Post has been published on https://www.vividracing.com/blog/holley-intech-cold-air-intake-for-16-21-toyota-tacoma-v6-models/

Holley iNTECH Cold Air Intake for '16-'21 Toyota Tacoma V6 Models

Holley is pleased to announce its new INTECH Cold Air Intake for the 2016-2021 Toyota Tacoma with the 3.5L V6 engine. The new system offers the ultimate in technology, performance, and styling that is currently available on the market for late-model trucks. iNTECH cold air intakes use a “patent-pending” seamless housing design to prevent hot air from coming in while enhancing the overall look of the engine bay as well. The one-piece intake tube design delivers maximum airflow and efficiency to supply your Tacoma with the freshest and coldest intake temperatures possible. Whether you are taking your third-gen Tacoma on or off the road, the Holley iNTECH Cold Air Intake kit will maximize your truck’s performance gains for wherever adventure takes it next.

View Complete Holley Catalog Here

The Holley iNTECH lineup represents the highest degree of cold air intake engineering out there. With this kit, your 2016-2021 Toyota Tacoma V6 truck can gain up to 13 horsepower and 12 pound-feet of torque, as proven on the dyno. It features a unique Slip-Seal housing-filter-tube interface that eliminates the use of hose clamps and adapters for a more seamless installation process. What’s more, the large, high-flow, washable and reusable 4-layer dry air filter eliminates the need for any oils that can damage MAF sensors and set off your truck’s check engine lights.

This system also includes a tuned resonator on the intake tube to minimize in-cabin drone. It is also used to reduce sound wave reversion inside the intake tube and helps to smooth out the flow of the incoming air for additional power gains. A front-mounted ram air scoop is implemented to force the maximum level of cool, dense fresh air into your engine for maximum performance benefits. The use of factory mounting locations and emissions controls, including a hydrocarbon trap, make for a simple installation so you can be on your way to a more efficient and powerful ride in no time. The housing design is styled to match the engine compartment of your Toyota Tacoma for a stealthy, factory-like appearance that matches the stock engine cover.

Features:

Produced +13 horsepower and +12 lb.-ft. of torque with excellent performance across all RPM levels

Unique patented Slip-Seal housing-filter-tube interface eliminates the use of hose clamps and adapters for a seamless installation at the filter housing

One-Piece fully sealed high volume intake housing design guarantees a true fresh air intake charge

Utilizes factory mounting locations for a simple and secure installation

High-flow, washable, and reusable 4-layer dry performance air filter for maximum airflow and filtration

Air filter media is constructed with an inner and outer aluminum mesh preventing filter deformation and rust

One-piece intake tube designed for maximum airflow and efficiency

Stainless steel hose clamps for maximum clamping force and durability

Housing is styled to enhance the look of your engine compartment for a stealthy, factory-like appearance that matches the stock engine cover

Ram air scoop is included to force as much cold, dense, fresh air into your engine for maximum performance

Ram air scoop doubles as a small tool holder when doing maintenance or other modifications

Tuned resonator on intake tube reduces intake drone and eliminates sound reversion that can cause turbulence inside the intake system and help increase performance and overall sound

Fitment:

2016-2021 Toyota Tacoma 3.5L V6

Learn More and Purchase the Holley iNTECH Cold Air Intake Here. 

If you have any questions, please do not hesitate to contact the Vivid Racing team. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com. 

[rileyreitano92774]

Buy it on Amazon - https://ift.tt/2uFqWO3 - Discount Price! Costway 30 Wall Mount Stainless Steel Push Control Kitchen Range Hood Vent Fan w/ Led Light -- Click the link to buy now or to read the 100 4 & 5 Star Reviews.Subscribe to our Channel: https://www.youtube.com/channel/UC9fuH4C_lF-Vn9W8dew_15w?sub_confirmation=1 Discount Price! Costway 30 Wall Mount Stainless Steel Push Control Kitchen Range Hood Vent Fan w/ Led Light I absolutely love this product. Got this for my cousin and everyone is happy. ... Reviewer : Mia Wow. This product is fantastic and does exactly what I was looking for. No surprises. ... Reviewer : Sophia Click https://ift.tt/2uFqWO3 to buy now on Amazon or to read more reviews. 【Brushed Stainless Steel Finish】Made of 430-grade stainless steel, highly corrosion resistant. Easy to clean, modern, and repels fingerprints. The brushed stainless steel finish works with any decor or kitchen design style. 【5 Push Button Controls】 Five easy to use push button controls enable the 3-speed fan capable of 400CFM of air flow and LED. Ultra-quiet operation keeps noise level less than 70dB at high speed. 【Superior Filtration】Durable reusable aluminum mesh filters included to trap grease and oil. It is washable, easy to clean and maintain. 【Assembly required】We offer explicit and understandable installation guide, helping you easily set up the Kitchen Range Hood. All hardware included. Just got it. This is awesome and the price you pay for the quality you get can’t be beat. ... Reviewer : Charlotte Click https://ift.tt/2uFqWO3 to buy now on Amazon or to read more reviews. ***Let Us Know What You Think… Comment Below!!*** Watch my other review Videos – https://www.youtube.com/channel/UC9fuH4C_lF-Vn9W8dew_15w Subscribe to our Channel: https://www.youtube.com/channel/UC9fuH4C_lF-Vn9W8dew_15w?sub_confirmation=1 #COSTWAY, #Costway 30 Wall Mount Stainless Steel Push Control Kitchen Range Hood Vent Fan w/ Led Light This is a review video for : B0791F424T Manufacture : COSTWAY Related Videos in Channel

[vividracing]

New Post has been published on https://www.vividracing.com/blog/top-5-best-intakes-for-the-ford-mustang-s550-v8/

Top 5 Best Intakes for the Ford Mustang (S550) V8

The Ford Mustang (S550) is the current and sixth generation of the iconic pony car. The Mustang GT continues to impress with the latest edition of the throaty 5.0-liter V8, now featuring an upgraded valvetrain and cylinder heads that help boost output to 460 horsepower and 420 pound-feet of torque. A new intake manifold features charge motion-controlled valves to partially close off the port flow at lower engine speeds to increases the air charge for improved air-fuel mixing and, thus, better efficiency and idle stability. Purists who go for the V8 version, instead of the base model with the turbo inline-four, are definitely performance enthusiasts. Many of these GT owners won’t stop there, though, and look to the aftermarket for mods that will enhance the Mustang’s naturally impressive engine.

One of the first mods many Mustang owners do is replace the restrictive factory air intake system with an upgraded aftermarket version. By swapping out the OE system, you can help the 5.0-liter V8 breathe more air and cooler air that will enhance its overall efficiency and performance. The result means a faster throttle response, higher power figures, and an overall more enjoyable driving experience. Not to mention, a new air intake system can really add a bit of oomph to your engine bay and can add a bolder sound to your ride as well. There are a number of reputable brands on the automotive aftermarket that produce quality air intake kits for the S550 Mustang V8 models. We have listed five of the best options out there to help you get started. Be sure to also browse our complete inventory of air intake products for the Ford Mustang S550 right here.

1. Corsa Performance Closed Box Air Intake

The Corsa Performance Closed Box Air Intake is available with the brand’s DryTech 3D Filter or MaxFlow 5 Filter. With this intake, you are guaranteed to get the coldest and freshest air, because the system provides a completely enclosed and insulated intake track from outside of the car straight into the engine. The Corsa Closed Box Air Intake features a roto-molded construction and is designed to deliver unmatched aesthetics and optimal performance benefits for your V8 Mustang. This intake comes with the option of two high-performance filters: Dry Tech 3D no-oil filtration and MaxFlow 5 oiled filtration. The former is recommended for those who prefer the easy maintenance associated with a non-oiled filter but the performance gains of a traditional cotton gauze media. The latter is ideal for high-performance street vehicles looking for maximum power gains. With its generously oversized air filter and inverted cone technology, this air intake outflows the stock counterpart by nearly 20 percent, creating up to 20 horsepower and 11 pound-feet of torque. 

Features:

Outflows Stock Intake Improving Performance

Shields Engine Heat Reducing Airflow Temperatures

Re-usable High-Performance Filtration Options (DryTech, MaxFlow)

Up to 50,000 miles no maintenance

98%+ Filtration Efficiency

Bolt-On Power, Installs in Minutes

No Tune Required. (Tune May Enhance Performance)

Backed by a Lifetime Warranty

2. JLT Performance Cold Air Intake Kit

The JLT Performance Cold Air Intake Kit for the V8 Mustang is improved and better than ever! It’s been fully computer-designed to optimize space and deliver the best fit and finish. It includes a large 5-inch filter inlet with a radiused end for a smoother airflow across the MAF (120mm). The intake tube itself measures 4.5 inches at the throttle body side in preparation for larger aftermarket throttle bodies to be installed. This intake system has a fully roto-molded heat shield and fresh air duct to the grille designed to keep inlet air temperatures as low as possible so you can enjoy improved performance. What’s more, JLT only uses the best air filters made by S&B to their strict specifications so you can rest assured that both the oiled and dry filter variants provide excellent filtration properties. With a large 5-inch opening on the intake tube, JLT needed a huge filter; the result is a monstrous 5×7-inch air filter with a built-in bellmouth for even more airflow. JLT designed this intake system to be an easy bolt-on installation, so no permanent modifications are necessary to upgrade your S550’s performance.

Features: 

Fully computer designed to optimize space

Large 5″ filter inlet with radiused end for smooth airflow

Comes with a roto-molded heat shield w/ fresh air duct

Designed to keep inlet air temperatures as cool as possible

JLT Black Textured Intake Tube

5×7 S&B Powerstack air filter

Options: Red oiled, Blue oiled, White dry filter

Delivers a perfect fit and finish

Quick and easy installation

JLT-specific tune is required with this kit

3. aFe Power Momentum GT Intake System

The aFe Power Momentum GT Intake System uses a CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit on your V8 Mustang. Three CNC machined, high-quality billet aluminum fittings are mounted on the tube to provide a seamless connection with the vehicle’s factory vacuum lines. A custom CAD-designed roto-molded housing is made from heat soak-resistant material and eliminates the use of multiple components for a simpler installation process. The entire construction is highly durable for long-lasting performance so you can enjoy its benefits for years and years to come, so long as you properly maintain the filter.

Speaking of, the Momentum GT intake system was designed around the largest air filter possible to allow for maximum power gains as well as excellent filtration and overall performance. This intake system is available with either aFe’s large Pro DRY S or Pro 5R performance air filter. The former features three layers of progressively finer mesh synthetic oil-free media and the latter has five layers of finer mesh cotton gauze oiled media. Both are made with 100% polyurethane frame for long life and multiple cleaning cycles. Best of all, this system includes a large, clear sight window that is used for easy filter inspection so you can ensure the air filter is clean and optimally functoning. 

Features: 

Dyno-Proven Gains up to +15 hp & +24 lb.-ft. torque

Outflows Factory Intake by 25%

Measured Flow: 221 CFM @ 1.5″ H2O

Computer-Designed Roto-Molded Intake Tube w/ One-Piece Sealed Housing

Washable and Reusable Pro 5R Air Filter for Maximum Performance – OR –

Washable and Reusable Pro DRY S Air Filter for Maximum Convenience

CNC Machined Billet Aluminum Fittings

Built-in Sight Window Provides Easy Inspection of Filter Without Disassembly

Unique (Patent Pending) Housing-to-Filter Interface for Easy Installation

4. K&N Performance Blackhawk Air Intake

The K&N Blackhawk Air Intake Kit is not only designed to look impressive under the hood of your Mustang GT, but also engineered to reduce factory restriction and improve airflow. Enjoy increased power gains, an enhanced engine sound, and outstanding filtration to protect your Mustang’s V8 engine. K&N intakes undergo rigorous testing and the resulting power and torque gains are quite impressive. Dyno tests have shown that this intake system will give your car an additional 9.5 horsepower at 7002 RPMs and 23 pound-feet of torque resulting from the enhanced airflow. It also enhances your throttle response and delivers a more aggressive sound well-mated to the pony car. The Blackhawk Cold Air Intake can be used immediately after installation without reprogramming your Mustang’s computer. Even so, a custom tune to recalibrate the ECU is highly recommended for optimum performance.

This intake features lightweight aluminum tubing cut and shaped to precise specs and the surface is carefully worked to remove any imperfections with a K&N engraved metal plate welded on it. The intake tubes are powder-coated with a durable and bold-looking flat black finish to elevate your engine bay’s appearance. K&N Blackhawk induction systems feature an oversized, conical-shaped, oil-free, black DryFlow synthetic air filter that maximized efficient airflow. This filter media can be used for up to 100,000 miles (under normal driving conditions) before cleaning is needed. Boasting excellent filtration properties, this layered, non-woven media has a pleated configuration to enable high dust holding capacity to deliver improved performance that is unmatched by the competition. K&N Blackhawk cold air intakes are guaranteed to provide proven power gains and are protected by the K&N 10-Year/Million-Mile Limited Warranty.

Features: 

Guaranteed to increase horsepower and torque

Enhances your vehicle’s overall engine sound

Outflows the factory intake for heightened performance

Powder-coated aluminum intake tube paired with dry synthetic air filter

Engineered to provide high airflow and exceptional filtration

Free-flowing, mandrel-bent aluminum intake tube

Includes a black, non-woven, synthetic air filter and heat shield

Free-Flowing, Mandrel-Bent Aluminum Tube

Filter only requires cleaning every 100,000 miles 

Straightforward install with simple hand tools

10-Year/Million Mile Limited Warranty

5. Injen EVOLUTION Cold Air Intake System

The Injen EVOLUTION Cold Air Intake System is, quite literally, the evolution of CAI kits. This system represents the next generation of performance intakes by Injen Technology. Specifically engineered for the Mustang GT, this system will deliver heightened performance with proven power gains to take your ride to the next level. Every EVOLUTION cold air intake is crafted from cross-linked high-density polyethylene for extreme durability and longevity. The box has a forward-facing ram air scoop to provide fresh, clean air to your engine so it can breathe better. The one-piece sealed housing uses Injen’s all-new Twist-Lock System to securely attach the large SuperNano-Web Dry air filter in place. The housing also includes a Clear-View badge for a cleaner and more aggressive underhood look as well as quick and easy filter inspections.

The EVOLUTION Cold Air Intake was designed to use the maximum amount of space available under the hood of your Mustang GT to ensure optimum breathing room and extreme performance. This kit uses a custom roto-molded and tuned tube to provide huge power increases while retaining a quality OE fit. The tube also utilizes the brand’s patented MR Technology for accurate fuel trims to ensure safe power improvements without the risk of throwing a check engine light. This intake system was precisely tuned and tested on Injen’s in-house dyno to replicate stock fueling while increasing horsepower and torque. The result is an increase of up to 26 horsepower and 23 pound-feet of torque.

Features:

Dyno Proven gains of up to 26 hp and 23 lb-ft. of torque

Designed to work with the stock calibration

Aggressive intake growl under acceleration

Durable Roto-Molded Polyethylene housing and intake tube

Fully functioning, forward-facing ram air scoop

Reinforced automotive grade silicone couplers

Fully serviceable Injen SuperNano-Web dry air filter

Replacement air filter part number x-1106-BB

Stainless steel band clamps with an inner protective liner

Aggressive under hood appearance while maintaining an OE fit

Injen Technology Limited Lifetime Warranty

[vividracing]

New Post has been published on https://www.vividracing.com/blog/top-5-best-intake-systems-for-your-polaris-rzr/

Top 5 Best Intake Systems for Your Polaris RZR

Polaris is arguably the world’s leader in side-by-side vehicles. The brand continues to break new ground with innovative performance to help riders push boundaries and explore new lands. Delivering superior control for unparalleled confidence, Polaris doesn’t just offer the ultimate riding experience ­– they define it. That reigns especially true for its highly popular Polaris RZR lineup. The Polaris RZR is known for delivering raw power paired with thrilling acceleration, and signature low-end torque that propels you to the front of the pack, and keeps you there. The Polaris RZR also boasts incredible levels of high-performance handling and agility to make it so responsive, it can practically guess your every move. Even so, there are certain modifications you can do to get the most out of your UTV and unleash its true potential so you won’t be constrained to factory limits.

For most enthusiasts, one of the first mods they do to their machines is upgrading the stock air intake system. That’s because the factory one is quite restrictive and could be holding your ride back from what it is truly capable of doing. That being said, the aftermarket houses a plethora of upgraded intake systems to let your Polaris RZR breathe freer, cooler air so that you can experience power gains across the RPM band as well as a better sound too. An upgraded air intake system also delivers enhanced styling to add some oomph to your UTV in a way that proves to be extremely functional and beneficial. You will find yourself riding more miles between filter servicing and enjoying enhanced acceleration and throttle response to transform your UTV experience.

We have compiled the following list (in no particular order) of the top 5 air intake systems for your Polaris RZR, based on factors like power gains, filtration properties, and overall construction. You can also browse our entire inventory of air intake systems for your Polaris RZR right here. If you have any further questions, please reach out to us by phone at 1-480-966-3040 or via email at sales@vividracing.com. 

1. Agency Power High-Flow Air Intake Kit

The Agency Power High-Flow Air Intake System for the Polaris RZR is one of the best upgrades you can do to help improve airflow from the intake to the engine. With this system, you will gain some respectable horsepower gains and notice improved drivability throughout your UTV’s entire RPM range. This kit features a roto-molded plastic tube design that faces the back of the vehicle, and includes a Polaris mesh-inspired cross brace and AP’s high-flow dry filters. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being caught. This filter is completely reusable, allowing you to easily clean and maintain it between trips. The dual filters mount uniquely on the intake tubes to grab more air and offer great styling to boot.

The new Agency Power intake tubes and filters replace your Polaris RZR’s factory system that runs to the roof of the vehicle. This new design helps to increase airflow effectively while providing better filtration properties than the stock system. The high-performing intake tubes also feature a smooth interior to eliminate any turbulent air. AP strategically designed this system from the ground up to be a direct bolt-on replacement for the factory Polaris RZR intake. This simple upgrade is a must-have for those running aftermarket roll cages and need an air intake solution. On top of all that, Agency Power has thoroughly tested this system in real-world desert conditions to ensure it delivers the highest levels of reliability, performance, and longevity.

Features:

Lightweight Roto Molded XLPE Plastic Constructed Tubes

Dual Black Intake Tubes

Unique Filter Mounting

High-Flow and Reusable Air Filters

Get Gains of 8-11 Horsepower

Cross Bar Available in Matte Black, Gloss White, and Gloss Red

Bolt-On, Easy Installation

Buy It Here! 

2. Agency Power Cold Air Intake System

The Agency Power Cold Air Intake System for the Polaris RZR is a great way to enhance the amount of airflow going from the intake to the turbocharger. This kit swaps out the stock corrugated rubber intake tube and paper mesh filter with AP’s durable silicone J-tube and high-flow reusable air filter. The J-tube and filter are direct replacements for the factory counterparts, allowing the use of the stock air inlet and box to protect and air in airflow. By adding the Agency Power CAI, you will notice gains in horsepower, torque, throttle response, and overall drivability almost instantaneously. Each and every component of this system was meticulously engineered to provide a reliable and long-lasting system that delivers proven results. As a simple add-on upgrade, this kit will prove to be successful in improving the overall performance of your Polaris RZR without any further mods needed.

The custom high-flow Agency Power filter features a blue mesh design (made of synthetic nano-fibers) with the AP logo and cap. The dry filter media does not need to be oiled and is completely reusable for your convenience. The silicone tube replaces the factory rubberized one and offers an easy installation between your UTV’s turbo and stock air box. It is made from 3-ply silicone material with a smooth inside that eliminates any turbulence caused by corrugated designs. The silicone intake is also much stronger than the Polaris RZR’s factory one, allowing it to hold up much better to harsh environments and off-road elements. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow-off valve port to work with your UTV’s factory components. 

Features:

3-Ply Silicone Construction

Stealthy Black Appearance

Also Available in Red and Blue

High-Flow, Reusable Air Filter

Simple Bolt-On Installation

Buy It Here! 

3. K&N Performance Air Intake System

The K&N Performance Air Intake System will take your Polaris RZR to the next level by getting rid of the restrictive stock one to get the most out of your UTV. This air intake kit comes with dual K&N high-flow air filters and a lidded heat shield that installs into the previous air box space. Air is directed through dual free-flowing aluminum intake tubes into the Polaris RZR’s engine throttle body to deliver noticeable power gains. A high-density polyethylene (HDPE) rotationally molded tube helps to increase the amount of airflow to your RZR’s engine to deliver additional horsepower and torque. The custom heat shield helps to protect intake air from high temperatures in the engine bay to keep things running cool and optimally. 

The system is paired with a washable and reusable high-flow air filter featuring oiled cotton filter media for the best filtration possible. The oversized cone-shaped air filters can be used for up to 100,000 miles before service is required, depending on overall driving conditions. This air intake is also relatively simple to install and can be done in just 90 minutes using basic hand tools. That’s because this system uses your UTV’s existing factory mounting points and includes a replacement silicone idle bypass hose for added convenience. It’s important to note, however, that the 57 series intake system is highway-legal in all 50 states, while the 63 series intake system is intended for off-road use only.

Features: 

Guaranteed to increase horsepower and torque

Roto-molded HDPE intake tube paired with oversized oiled cotton air filter

Engineered to provide high airflow and exceptional filtration

Replaces factory air filter and intake tube

Filter only requires cleaning every 100,000 miles under normal driving conditions

A typical installation can be done in 90 minutes or less with simple hand tools

10-Year/Million Mile Limited Warranty™

Will not void vehicle warranty

Buy It Here! 

Buy the Off-Road Version Here! 

4. K&N Performance AirCharger System

  The K&N 57 (highway-legal) and 63 (off-road use) AirCharger Air Intake System is intended to replace the restrictive factory air filter and air intake housing on Polaris RZR models. This package delivers proven increases in both horsepower and torque numbers for a more enjoyable ride that unleashes the true potential of your machine. K&N’s famous air intake kits are designed to dramatically reduce intake restriction as they smoothen and straighten the airflow your vehicle is taking in. Such allows your UTV’s engine to inhale a larger volume of air than the factory air filter assembly. And we all know that more air means more usable power and acceleration throughout the entire RPM range. K&N knows what it takes to deliver excellent filtration properties in an attractive and high-performing package, and this is no exception. 

The K&N Performance Air Intake System includes a high-flow air filter, which is protected from the elements with an enclosed filter housing. Air is directed via a free-flowing aluminum intake tube into the engine’s throttle body for guaranteed power gains. The oversized conical high-flow air filter is both washable and reusable. It features oiled cotton filter media that is further protected by the enclosed filter housing for added defense against unwanted heat and elements. It can be used for up to 100,000 miles between servicing is needed, depending on your driving conditions. This package can be easily installed in about 90 minutes or less using standard hand tools. The 57 series is legal in all 50 states while the 63 series is not legal for use in California.

Features: 

Guaranteed to increase horsepower and torque

Includes a Free-flowing aluminum intake tube

Designed to improve throttle response and engine sound

Engineered to provide high airflow and exceptional filtration

Filter only requires cleaning every 100,000 miles under normal driving conditions

Typical installation can be completed in 90 minutes or less with simple hand tools

10-Year/Million Mile Limited Warranty

Emissions Compliant – Legal in all 50 states

Buy It Here! 

Buy the Off-Road Version Here! 

5. AIRAID Powersports Air Intake w/ Snorkel & Scoop

AIRAID’s first-ever product was a filter that replaced the restrictive factory component. These were sold as intake system kits and were immediately met with heightened demand and popularity in the high-performance aftermarket. Using that, AIRAID expanded into optimizing air intakes across a wide spectrum of vehicles, including UTVs, to power drivers and explorers to adventure further and discover the full potential of their ride. The AIRAID Powersports Air Intake with Snorkel and Scoop for the Polaris RZR is a complete bolt-on replacement for the stock system and comes with all of the necessary hardware for a seamless installation process. No additional tuning is needed ­– just bolt it on and go on your way!

The AIRAID UTV air intake system is proven to deliver gains in horsepower with the added benefit of less required maintenance. The system starts with an AIRAID premium air filter to increase airflow and provide better filtration, especially in harsh environments. In addition to being a high-quality air filter, this one is fully washable and reusable for added convenience. Simply wash/clean it between rides for optimal performance and keep on riding! The unique AIRAID snorkel system in this package allows your machine’s intake air to be drawn from up high above, away from water and trail dust. Air restriction is addressed in the factory air box by replacing it with a new, one-piece roto-molded air box on many applications.

Features: 

Increases horsepower and acceleration

Snorkel places the air inlet up away from water and dust

Secures air intake snorkels onto the roll cage

AIRAID premium washable and reusable filter

Complete bolt-on kit; Easy Installation

No Hassle Lifetime Warranty

Buy It Here! 

Buy It w/o Snorkel Here! 

[vividracing]

New Post has been published on https://www.vividracing.com/blog/new-holley-intech-cold-air-intake-for-2018-2020-jeep-wrangler-jl-2-0l/

New Holley iNTECH Cold Air Intake for 2018-2020 Jeep Wrangler JL 2.0L

Replace your Jeep Wrangler’s restrictive stock intake system with the new iNTECH Cold Air Intake from Holley. This innovative system offers the ultimate in technology, performance, and styling for late-model cars, SUVs, and trucks. This particular system is designed for the popular 2018-2020 Jeep Wrangler JL models equipped with the 2.0L engine. When installed, this cold air intake produces power gains of up to +18 horsepower and +25 pound-feet of torque on the dyno over the stock setup.

View All Holley Products Here

The iNTECH series uses a “patent pending” seamless housing design aimed to prevent hot air intrusion while simultaneously enhancing the look of your engine bay. The one-piece intake-tube design provides maximum airflow efficiency and supplies your Jeep with a true fresh air intake charge. A tuned resonator on the intake tube itself helps reduce unwanted noise from the intake and improves airflow throughout the entire system to deliver optimal results. Moreover, the large, high-flow, washable, and reusable 4-layer dry air filter eliminates the use of filter oils that can damage MAF sensors and set off check engine lights.

Connections between the housing, filter, and intake tube utilize Holley’s uniquely patented Slip-Seal interface to reduce the number of hose clamps and adapters needed for a cleaner installation process. In fact, this system uses your Jeep Wrangler’s factory mounting locations and emissions controls, making for a simple install. Lastly, the special housing design has been styled to match your JL’s engine compartment to make for a beautifully stealthy appearance.

Features:

Produced +18 horsepower and +25 lb.ft. of torque with excellent performance across all RPM levels

Unique patented Slip-Seal housing-filter-tube interface reduces the use of hose clamps and adapters for a seamless installation

One-Piece fully sealed intake housing design guarantees a true fresh air intake charge

Utilizes factory mounting locations for a simple and secure installation

High-flow, washable, and reusable 4-layer dry performance air filter for maximum air flow and filtration

Air filter media is constructed with an inner and outer aluminum mesh preventing filter deformation and rust

One-piece intake tube designed for maximum airflow and efficiency

Stainless steel hose clamps for maximum clamping force and durability

Housing is styled to enhance the look of your engine compartment for a stealthy appearance

Fitment: 2018-2020 Jeep Wrangler JL (L4-2.0L)

Learn More and Purchase the Holley iNTECH Cold Air Intake Here. 

If you have any questions, please do not hesitate to contact the Vivid Racing team. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com. 

[vividracing]

New Post has been published on https://www.vividracing.com/blog/top-5-best-intake-systems-for-ford-f-150/

Top 5 Best Intake Systems for Ford F-150

If you are looking to treat your Ford F-150 to some goodies, a new intake system is a great place to start. Cold air intakes are one of the first modifications car enthusiasts install on their vehicles. Why? Because unlike other engine mods, such as exhaust systems or bolt-on turbos, intake systems are more affordable and fairly simple to install.

Upgrading your F-150’s air intake system is one of the cheapest ways to increase its horsepower and performance. While they won’t add quite as much power as other engine parts, they will help your engine in numerous other ways like improving airflow, reducing air temperatures, and delivering better fuel economy. Adding to that list of benefits, a cold air intake system will give your F-150 a nice throaty growl that is sure to supply more smiles per mile.  

All in all, you can’t go wrong with an aftermarket cold air intake. But the virtually endless catalog of options out there could be overwhelming to some. To help you along, we have compiled a list of some of the best Ford F-150 intake systems below.

#1 K&N Performance Cold Air Intake System

Get the most out of your Ford F-150 truck with the K&N Performance Cold Air Intake System. Strategically designed to maximize your truck’s power by removing the restrictive stock filter and replacing it with a premium cotton one that allows for improved airflow and enhanced performance. K&N only uses top-grade components when manufacturing its cold air intake systems. This kit features a polyethylene corrosion-resistant construction intake tube and a custom heat shield that helps protect intake air from the high temperatures of your engine bay.

K&N’s high-density polyethylene (HDPE) rotationally-molded tube helps increase the amount of airflow to your engine, thus providing guaranteed power gains. With this system, it is possible to achieve as great as 23 horsepower and 34 pounds-feet of torque, which is an incredible bang for your buck. The system is paired with a washable and reusable high-flow cotton air filter coated with oil to capture dirt and other debris as they flow too. The oversized, conical shape allows you to drive up to 100,000 miles before servicing your filter. The filter is super efficient and effective and may only need to be washed every once in a whole. 

K&N’s cold air intake system can typically be installed in under 90 minutes using your Ford F-150’s existing factory mounting points. Moreover, you can just install the system and go. There is no tuning needed! It may sound different and deliver more power, but your truck will drive perfectly fine without a tune.

Get Yours Here!

#2 Airaid MXP Series Cold Air Intake System

Your Ford F-150 will be faster and more efficient when you install this AIRAD MXP Series Cold Air Intake System. The MXP Series represents the ultimate in AIRAID cold air induction systems. It is specifically engineered to deliver higher levels of horsepower and acceleration gains for both high-performance gas and diesel vehicles. This AIRAID system directs more air to the engine and lets it run more efficiently overall. This means that your Ford F-150 will experience higher horsepower figures and drive further on the same amount of fuel. The power gains can be as large as 24 horsepower when installed properly. That’s a major improvement for the money!

AIRAID’s MXP Air Intake Systems begin with a replacement one-piece roto-molded air box that tackles the faults of the restrictive factory design. The airbox houses an AIRAID premium air filter that delivers outstanding airflow and filtration. The air is directed through a new air intake tube crafted from cross-linked, high-density polyethylene using advanced computer modeling processes to maintain proper mass air flow readings and calibration.

The AIRAID MXP intake combines high-quality materials, durable components, an excellent fit and finish, and aggressive styling that is unparalleled on the market today! This system is available with either a SynthaFlow oiled filter or a dry filter. The filter is washable and reusable, crafted from several layers of high-quality cotton gauze and a special nano fabric material that captures everything down to two microns in size. The AIRAID MXP Series Cold Air Intake is specifically designed for your Ford F-150 for a perfect fit and easy installation process. The kit goes on fast and does not require any special tuning to function properly. Just bolt it on and drive!

Get Yours Here!

#3 aFe Power Momentum GT Cold Air Intake System

Outflow your Ford F-150’s factory intake by up to a whopping 66 percent with the aFe Power Momentum GT Cold Air Intake System. The Momentum GT intake is strategically designed around a pre-oiled, large 9-inch-tall conical inverted top air filter that boasts a 360-degree radial flow. The filter features five layers of high-quality mesh cotton that provides maximum airflow and performance. The oiled filter can also be easily washed and re-oiled for several reuses and long-term functionality. The patented unique air filter-to-housing interface allows for the largest filter size, thus increasing the amount of available air.

The Momentum GT Cold Air Intake spotlights a smooth one-piece sealed housing, rather than the use of multiple-piece housings, to ensure the coolest air intake charge available. A large, clear sight window is also present for hassle-free filter inspection and a more appealing look overall. This cold air intake system utilizes a CAD-designed, dyno-tuned, roto-molded intake tube crafted from cross-linked polyethylene plastic to achieve the maximum power gains possible. The tough molded plastic design is developed to last for years. What’s more, aFe guarantees it will resist chemicals and heat, and not corrode as time goes by.

Two CNC-machined, high-quality billet aluminum fittings are mounted on the tube to provide a perfect connection with the Ford F-150’s OE vacuum lines. Ultra-strong premium stainless steel T-bolt clamps and silicone couplings are included in the kit for a secure installation. aFe Momentum GT intakes are engineered with fewer parts for a quick and easy bolt-on installation process. Tuning is not required; you will enjoy smooth engine operation right from the get-go.

Get Yours Here!

#4 AEM Brute Force Cold Air Intake System

If you are looking for improved performance for your Ford F-150, look no further than the AEM Performance Cold Air Intake. AEM is dedicated to designing air intake systems that allow the largest amount of cold air to reach your truck’s engine and, therefore, boost horsepower and torque figures. This AEM kit was designed, dyno-tested, and tuned specifically for your Ford F-150. Not only does it boost power under the hood, but it cools your engine efficiently so you can experience better acceleration and improved fuel economy. The icing on the cake is the more aggressive sound you will hear when you step on the gas.

Air enters the system via an oversized AEM Dryflow synthetic washable air filter for amazing airflow, filtration, and performance. The air filter is located in the original air box space and is protected by a heat shield designed to reduce intake air temperature and heighten horsepower. The dual intake AEM Dryflow air filter is constructed from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is required. The Dryflow synthetic air filter is also 99.4% efficient in fine dust testing, never needs to be oiled, and filters out dirt as small as one micron. 

The air intake tubes are crafted from CNC mandrel-bent 6061 aluminum with a durable gunmetal gray powder-coated finish. Moreover, AEM’s Brute Force Cold Air Intake was developed to accommodate the engine’s factory emissions control devices like the intake air temperature sensor. 

Get Yours Here!

#5 JLT Performance Cold Air Intake System

The JLT Performance Cold Air Intake will have your Ford F-150 driving faster and more capably. It is specifically designed to draw more air into the engine and keep it cooler for increased power generation. This system was developed using advanced processes to optimize space and ensure the best fitment. It is crafted using an attractive and durable black textured plastic that can handle extreme temperatures and hold its shape and form well over time.

The JLT Cold Air Intake features special MAF housing for added performance, in addition to a Powerstrack air filter to keep the air clean as it moves through the system. The large 4.5-inch S&B filter inlet with a radiused end allows for smoother airflow to the F-150’s throttle body. JLT uses only the best air filters made by S&B to its own stringent specifications. JLT loves S&B’s tapered flange design and Powerstack filtered ends for optimal performance.

The JLT Performance intake system retains the bottom half of your Ford F-150’s stock airbox and maintains a fresh air feed by doing so. JLT also includes a new top half to accept its larger filter (4.5×6 inches) and tube. The black textured intake tube measures 4 inches at the throttle body side to allow for larger aftermarket throttle bodies. In testing, JLT found power gains to be a consistent 10-15RWHP at the peak, with even more under the curve. No tuning or modifications are needed.

Get Yours Here!

[vividracing]

New Post has been published on https://www.vividracing.com/blog/announcing-new-products-specials-and-info/new-products-releases-from-afe-15-17-mini-cooper-s-scorcher-intake-exhaust-filters-video/

New Products Releases From AFe - 15-17 Mini cooper S - Scorcher - Intake - Exhaust - Filters - Video

AFe has done a recent release of products for the 2015-2017 Mini Cooper S 2dr/4dr. The newer 2.0 Turbo power plant has tons of potential and is easy to gain great power with simple bolt on modifications. AFe Has a full line of Intake, exhaust and software to boost power levels up to 50Hp! These items have a straight forward installation, for instant gains. The Dry flow filter and Exhaust are shipping now, Scorcher unit and cold air intake system are set to ship towards the end of the month.

For inquries, give us a call 1-480-966-3040 or email Sales@vividracing.com

aFe POWER SCORCHER GT Module

+38HP / +48FT lbs

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increase turbo boost. It improves vehicle performance and throttle response. In testing, this module resulted in significant +38 horsepower and up to +48 lbs. x ft. of torque verified by our in house dyno.

High Quality Case & Wire Harness: aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors, plugs directly into the stock wiring harness connectors and sensors.

High Precision and Quality: SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products.

Direct Plug & Play Power: This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response.

In-Cabin On-the-Fly Power Adjustments: SCORCHER GT modules features In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin.

aFe POWER 54-12862 Magnum FORCE Stage-2 Pro 5R Cold Air Intake System

8″ Large Air Filter: This intake system utilizes a pre-oiled, large 8″ tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Top Mounted Heat Shield Design: aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations.

Mandrel-Bent Tubing: One-Piece 3″ Mandrel-Bent Wrinkle-Black Powder-Coated aluminum intake tube directs unrestricted airflow from the filter to the turbocharger for more horsepower and torque.

aFe POWER 49-36331-B MACH Force 304 Stainless Steel Cat-Back Exhaust System

    ncludes a high-flow stainless steel muffler

Constructed 2.5″ TIG-welded mandrel-bent, 304 stainless steel tubing

Includes dual 3.5″ diameter Black Stainless steel tips

Utilizes factory mounting locations for easy direct bolt-on installation

All hardware and clamps are included for a hassle-free installation

Dual center exit exhaust system

Fits: 2 Door Vehicles

aFe POWER 31-10256 Magnum FLOW Pro DRY S Air Filter

Oil-Free, Pro DRY S 3-Layer Progressive Porosity Synthetic Media for maximum convenience

100% Polyurethane Frame On All Sides For Extra Long Filter Life

Washable and Reusable for Multiple Cleaning Cycles

Up to 68% increase in Flow

25mm Deep Rounded Open Pleats / 19 Count

Progressive Bump Seal Design for a Perfect Fit