#UK sewage pump servicing

[pumpingstationsuk]

A Complete Guide to Maintaining Your Sewage Pump

Learn essential steps for maintaining your sewage pump, including regular inspections, cleaning, lubrication, and monitoring performance. Keep your system running efficiently and prevent costly breakdowns. For expert maintenance, contact Packaged Pumping Stations Ltd. today and ensure long-term performance.

[pumpsuppliesltd]

Pump Supplies:  Expert Pump Solutions provider

From expert advice to expertly engineered solutions, Pump Supplies delivers both local service and nationwide coverage. With an unmatched fleet of Electric Submersible Pumps and a wide range of accessories and pipework, we're here to offer 24/7 support and give you peace of mind.

[eaglesnick]

Great Britain?

In October 2019 it was reported that,

“Boris Johnson looks to an election with promise to make UK ‘greatest place on earth’ (POLITICO: 14/10/19)

Implicit in this statement is the assumption that Britain is no longer the best place on earth to live and raise a family. A belief that other countries are now better than we are, that Britain is no longer the country it once was. In short, the belief that Britain is in decline, that we have somehow become a second rate nation. 

We all know about the corruption at the heart of government, from tax avoiding Chancellors of the Exchequer, to scandals over Partygate, ministerial bullying, cronyism, and much else beside. Sadly, none of this comes as a surprise, so low is our opinion of politicians (of all parties) and the political process. But although our phlegmatic national character has much to commend it, surely now is time we stirred ourselves into action, cast aside lethargy and began to demand better from those who purport to rule in our name.

We could do worse than look to the French who, objecting to the undemocratic imposition of the raising of the retirement age from 62 to 64, took to the streets in their tens of thousands, and whose political opposition party stood up in the French parliament holding up placards and singing La Marseillaise.

Be it rumours of the UK state pension age being raised to 68, to millions of tonnes of raw sewage being pumped into our waterways we sit idly by and do nothing. From the gradual collapse of the NHS to the quiet but persistent run down of our public sector services we remain silent, and, by default, compliant.

Mr Johnson was perfectly right to draw our attention to the decline of Britain, a decline brought about by successive Conservative governments including his own.

[proven456]

Innovative Pipe Maintenance Solutions for Efficient Infrastructure

Maintaining and optimizing water and pipeline infrastructure is crucial for ensuring uninterrupted service and minimizing costly disruptions. Innovative techniques such as ice pigging, hot tapping, pipe freezing, line stopping, and advanced leak detection systems are revolutionizing the industry. Here’s how these services can enhance the efficiency and reliability of your pipeline infrastructure.

Efficient Cleaning with Ice Pigging

Ice pigging is an advanced method used to clean pipelines without causing damage. This technique involves pumping a thick slurry of ice into the pipe, which scours the interior surfaces, removing sediment and biofilm. It is particularly effective for water and sewage pipes, providing a thorough cleaning with minimal downtime. Ice pigging is environmentally friendly and can be used in pipes of various sizes and materials, making it a versatile solution for maintaining pipeline integrity.

Safe and Effective Pipeline Modifications with Hot Tapping

Hot tapping allows for safe modifications and repairs to existing pipelines without shutting down the system. This technique involves drilling into a live pipeline to create a new branch connection, ensuring continuous service. Hot tapping is essential for industries that cannot afford disruptions, such as oil, gas, and water utilities. It enables quick and efficient modifications, reducing downtime and maintaining productivity.

Temporary Pipe Isolation with Pipe Freezing

Pipe freezing is a method used to create a solid ice plug within a pipe, allowing for temporary isolation without draining the entire system. This technique is ideal for performing maintenance or repairs on specific sections of the pipeline. By freezing the pipe, work can be carried out safely and efficiently, minimizing service interruptions. Pipe freezing is suitable for a variety of fluids, including water, oil, and chemicals, making it a versatile option for different industries.

Controlled Pipeline Interventions with Line Stopping

Line stopping is a technique used to temporarily block the flow in a pipeline, enabling maintenance or repairs on the isolated section. This method involves inserting a plug into the pipeline while it is still in operation, allowing for controlled interventions without shutting down the entire system. Line stopping is crucial for maintaining continuous service in critical infrastructure such as water, gas, and petrochemical pipelines. It ensures safety and efficiency during repair and maintenance activities.

Advanced Leak Detection Systems for Enhanced Monitoring

Implementing a leak detection system is essential for monitoring and maintaining pipeline integrity. These systems use advanced technologies to detect leaks in real time, preventing significant damage and reducing water loss. Water leak detection systems UK are designed to meet the specific needs of various industries, providing accurate and reliable leak detection. These systems can identify leaks at an early stage, allowing for prompt repairs and minimizing environmental impact.

Incorporating innovative techniques such as ice pigging, hot tapping, pipe freezing, line stopping, and advanced leak detection systems into your pipeline maintenance strategy can significantly enhance efficiency and reliability. These methods ensure minimal disruption, reduce downtime, and maintain the integrity of your infrastructure. Investing in these advanced solutions will not only improve operational efficiency but also protect your assets and the environment. For businesses in the UK, implementing water leak detection systems UK is a proactive step towards sustainable and efficient pipeline management.

[hooper8h]

The Essential Guide to Septic Tank Emptying in Norfolk

Septic tanks play a vital role in managing household waste in rural Norfolk areas, where connections to main sewage systems are often unavailable. Regular maintenance of these systems is crucial not only for operational efficiency but also to prevent environmental problems. Understanding Septic Tanks A septic tank is an underground chamber made of concrete, fiberglass, or plastic through which domestic wastewater flows for basic treatment. Solids and organics are decomposed through an anaerobic process. Key components include the tank itself, the drain field, and the pipes that carry wastewater from the home to the tank and then from the tank to the drain field. Importance of Regular Septic Tank Maintenance Neglecting the maintenance of a septic tank can lead to unpleasant and costly issues such as blockages and overflows. Regular maintenance ensures the system operates effectively, avoiding unsanitary conditions and potential fines from non-compliance with health regulations. Regulations and Compliance In Norfolk, septic tank maintenance is governed by regulations that ensure environmental safety and public health. Compliance with these rules, such as those set out by the Environment Agency, is crucial to avoid penalties and contribute to a cleaner environment. How Often Should You Empty Your Septic Tank Emptying Norfolk? The frequency of septic tank emptying depends on several factors including the size of your tank and the number of people in your household. Generally, it is recommended to empty the tank every 1 to 3 years to prevent sludge build-up that can lead to system failure. Choosing the Right Septic Tank Service Selecting a reliable septic tank service is critical. Look for providers that are licensed and have good reviews. Services should not only include pumping out the tank but also a thorough check of the system to identify potential issues. Signs Your Septic Tank Needs Emptying Warning signs that your septic tank requires attention include slow draining toilets and sinks, unpleasant odors around the tank, and unusually lush vegetation around the drain field area. If you notice any of these symptoms, it's time to call a professional. Online Booking and Modern Conveniences Many septic tank service providers now offer online booking, allowing you to easily schedule maintenance. This convenience helps ensure that your septic system is serviced without delay, maintaining its integrity and functionality. Conclusion Maintaining your septic tank is not just a requirement but a necessity for health and safety in rural settings. Regular checks and emptying will save money in the long run and keep your home's wastewater system working effectively. 

For professional and reliable Septic Tank Emptying Norfolk services, trust F.E.S 24/7 Ltd. Our experienced team is ready to provide comprehensive solutions for your liquid waste management needs across the UK.

[masterbuildermercantile]

Streamline Your Projects with the Best Online Plumbing and Heating Stores

In the world of construction and renovation, having access to reliable plumbing and heating supplies can make all the difference. Whether you're a seasoned contractor or a DIY enthusiast, finding the right online store can save you time, money, and headaches. In this guide, we'll explore the top-rated online destinations for plumbing and heating supplies, including the best online pump supply and commercial plumbing resources.

Best Online Plumbing and Heating Stores

When it comes to sourcing plumbing and heating supplies online, quality and reliability are paramount. Here are some of the best online stores that cater to professionals and homeowners alike:

Master Builder Mercantile: Master Builder Mercantile stands out as a one-stop shop for all your plumbing and heating needs. From faucets and fixtures to water heaters and HVAC systems, they offer a comprehensive range of products from top brands. Their user-friendly website and excellent customer service make shopping a breeze.

PlumbNation: PlumbNation is another leading online retailer known for its extensive selection and competitive prices. Whether you're looking for pipes, fittings, or boilers, they have you covered. Plus, their fast shipping and hassle-free returns policy ensure a seamless shopping experience.

Build.com: Build.com is a popular choice for both professionals and DIYers seeking quality plumbing and heating supplies. With a vast inventory of products and helpful resources like buying guides and expert advice, they make it easy to find exactly what you need for your project.

Top Rated Online Pump Supply

In addition to plumbing fixtures, pumps play a crucial role in various applications, from water circulation to drainage. Here are some online stores renowned for their pump supplies:

PumpBiz: PumpBiz is a trusted source for high-quality pumps for residential, commercial, and industrial use. With a wide range of products, including submersible pumps, centrifugal pumps, and sewage pumps, they have solutions for every need.

Global Industrial: Global Industrial is a go-to destination for pump supplies, offering a vast selection of pumps and accessories at competitive prices. Whether you're looking for a sump pump for your basement or a booster pump for your irrigation system, they have you covered.

Pumps UK Ltd: Pumps UK Ltd specializes in pumps for heating, ventilation, and air conditioning (HVAC) systems. With a focus on efficiency and reliability, they provide top-rated pumps from leading manufacturers like Grundfos and Wilo.

Best Online Commercial Plumbing Supplies

For professionals in the plumbing and construction industry, having access to quality commercial plumbing supplies is essential. Here are some online retailers that cater specifically to commercial customers:

SupplyHouse.com: SupplyHouse.com is a leading supplier of plumbing, heating, and HVAC products for commercial and residential projects. With a vast inventory and competitive prices, they're a favorite among contractors and builders.

Ferguson: Ferguson is a trusted name in the construction industry, offering a wide range of plumbing supplies for commercial applications. From pipes and fittings to valves and fixtures, they have everything you need to complete your project on time and on budget.

Zoro: Zoro is a convenient online destination for commercial plumbing supplies, offering a vast selection of products from top brands. With fast shipping and responsive customer service, they make it easy to get the supplies you need, when you need them.

In conclusion, finding the best online plumbing and heating stores, pump supplies, and commercial plumbing resources can streamline your projects and ensure success. Whether you're a professional contractor or a DIY enthusiast, these top-rated retailers have everything you need to get the job done right. Happy shopping!

Read more: Finding the Best Plumbing Supply and Access Doors Online

[pumpsuppliesuk]

Unleash the power of Flygt pumps with Pump Supplies! 🚀💧 Elevate your pumping game with our top-notch Flygt Pump Hire services in the UK. Efficiency meets reliability – every drop counts.

Visit now: https://pumpsupplies.co.uk/products-services/pump-spares-sales/sewage-pumps/

[olko71]

New Post has been published on All about business online

New Post has been published on https://yaroreviews.info/2023/07/big-thames-water-investor-backs-turnaround-plans

Big Thames Water investor backs turnaround plans

PA Media

By Michael Race

Business reporter, BBC News

One of the UK’s largest private pension funds has backed Thames Water to turnaround its finances and performance after fears the firm could collapse.

Universities Superannuation Scheme (USS), a major investor in the water firm, is the first to publicly support it as it looks to secure extra funding.

Thames Water is billions of pounds in debt and there have been calls for it to be nationalised.

USS said the firm “could benefit” from having it among its shareholders.

“We know that leakage and sewage remain major issues, but we also know there are no quick fixes where a complex network of pipes stretching for miles – some of which have been in the ground for 150 years – need to be replaced,” said USS group chief executive Bill Galvin.

Mr Galvin added improvements would “take time” and added “significant investment is needed”.

Thames Water, which serves a quarter of the UK population, has faced heavy criticism over its performance in recent years due to sewage discharges and leaks. The company leaks more water than any other water company in UK, losing the equivalent of up to 250 Olympic size swimming pools every day from its pipes.

Its chief executive, Sarah Bentley, resigned last week, weeks after she was asked to forgo her bonus over the company’s handling of sewage spills.

Why is Thames Water in so much trouble?

No free lunch for water nationalisation – Tory peer

Thames Water is a private company, owned by a group of investors, with the largest being the Canadian pension fund, OMERS, with 31.8%.

OMERS has declined to comment on the water firm’s current situation, but USS, a pension fund for UK academics and the second biggest investor with a 19.7% stake, is the first to announce its support.

“We have given our backing to Thames Water’s turnaround plan and Net Zero roadmap and engage with them regularly to support their long-term strategy,” Mr Galvin said in note to staff, which was first reported by the Financial Times.

“We remain of the view that, with an appropriate regulatory environment, the long-term objective of repairing important UK infrastructure and paying pensions to our members are in strong alignment.”

Thames Water said last week that it was trying to raise the cash it needs to improve.

It said it was keeping water regulator Ofwat informed on progress, and that it still had “strong” cash and borrowing reserves to draw on.

The government has said it was ready to act in a worst case scenario if Thames Water collapsed.

Regardless of what happens, water supplies will continue as normal to customers.

Last year Thames Water’s owners – including USS – pumped £500m into the business and pledged a further £1bn to help it to improve.

But the company is understood to be struggling to raise the remaining cash which it needs to service its substantial debt pile, which is around £14bn. Interest payments on more than half of its debt are linked to the rate of inflation, which has soared over the last year.

Other water firms are also facing similar pressures due to higher interest payments on their debts and rising costs including higher energy and chemical prices.

Related Topics

Companies

Sewage

Thames Water

More on this story

Thames Water customers’ bills ‘will not be affected’

3 days ago

No free lunch for water nationalisation – Tory peer

1 day ago

Why is Thames Water in so much trouble?

3 days ago

Thames Water in urgent talks amid collapse fears

3 days ago

Lib Dems unveil plan to overhaul water industry

4 days ago

[pumpingstationsuk]

How to Improve the Safety of Your Pumping Station

Discover essential strategies to improve the safety of your pumping station, including regular maintenance, modern equipment upgrades, electrical safety measures, and effective training. Protect your personnel and infrastructure with expert advice from Packaged Pumping Stations Ltd. Contact us today for comprehensive safety solutions.

[packagedpumpsolutions]

If you need expert help with your sewage pumping station maintenance, ask the experts at PPS for hassle-free services in the UK. Packaged Pump Solutions is your one stop shop for all wastewater-related issues.

[eaglesnick]

Where There’s Muck, There’s Brass

We learn something new everyday. Apparently, the price the privately, mainly foreign owned, water companies charge us for our water is in part determined by the number of discharges of raw sewage into our water supply.

“The number of pollution incidents a company reports, and any breaches to permits attached to water treatment plants to control raw sewage releases, are actors in determining the price water companies can charge for their services.."  (Guardian:09/08/23)

The big row this revelation has caused centres around the alleged underreporting of raw sewage into out rivers, streams and waterways, thus allowing the water companies to charge more for their services. 

“Water bills: Fight for money back over sewage leaks begins The UK's six biggest water firms are facing legal action over claims they underreported pollution and overcharged customers.”  (BBC News: 09/08/23)

Fair enough, sue the bastards if they are lying about the true number of  raw sewage discharges. But what I find even more worrying is the fact that if the water companies DO meet their pollution targets they can charge us extra on our water bills.

We know the government has given them until 2050 to clean up their act so in the meantime raw sewage will be pumped into our waterways and onto our beaches. I have no idea what the pollution targets are but I don’t really care if its 20 turds per cubic metre of fresh water or 50: it still equates to polluted, unsafe water that is killing fish stocks and aquatic wildlife and presenting a dangerous hazard to human life.  The very idea that the water companies can charge you and me EXTRA for having only 20 turds in our water  rather than 50 is mind-boggling.

[updatesnews]

UK water horror: Hundreds of swimmers falling ill as sewage pumped into seas and rivers | Science | News

UK water horror: Hundreds of swimmers falling ill as sewage pumped into seas and rivers | Science | News

Farmer speaks out over sewage being pumped into a local river The warning comes from Cornwall-based environmental charity Surfers Against Sewage, who have just updated their free Safer Seas & Rivers Service, which provides real-time data about water quality and sewage pollution at 400 locations across the UK. To mark the relaunch, the charity has also set up a temporary lifeguard tower on…

[qubemagazine]

New Post has been published on Qube Magazine

New Post has been published on https://www.qubeonline.co.uk/how-can-smarter-metering-help-the-water-industry-and-consumers-achieve-net-zero-2/

How can smarter metering help the water industry and consumers achieve Net Zero?

NEWS FEATURES FIRE & SECURITY SUBMISSIONS RESOURCES

Industry comment by Craig Mellor, Director, Deer Technology Ltd

Following the COP26 conference in Glasgow, there is a renewed buzz about achieving Net Zero greenhouse gas (GHG) emissions. Governments, local authorities, businesses and other organisations are all aiming for the same target, though not necessarily by the same date. In England, the water industry is ahead of the game, having pledged in 2019 to achieve Net Zero by 2030, two decades ahead of the UK Government’s target date of 2050. Water companies in Scotland and Wales are aiming for Net Zero by 2040 and Northern Ireland is aligned with the UK’s target of 2050.

Local authorities, combined authorities, businesses and numerous other organisations have also announced their intentions to achieve Net Zero, with many pledging to do so sooner than 2050. Something that impacts everyone, from individuals through to large organisations and Governments, is water. Every litre of mains water delivered to the tap has an amount of greenhouse gas emissions associated with it, so this is something to which water companies, retailers and consumers of all sorts need to pay close attention.

According to the Water UK website, the water industry delivers 15 billion litres of water every day and treats sewerage from more than 28 million properties. Water is treated at over 7000 sites and there are hundreds of thousands of miles of buried pipework.

Greenhouse gas emissions are generated in many different ways by the water industry. Pumping is a significant contributor, but there are also emissions due to the need to power water treatment processes, service buildings and operate vehicles. In addition, water and sewage treatment result in emissions of methane and nitrous oxide, both of which are greenhouse gases. When infrastructure is repaired, upgraded or newly constructed, there are further emissions.

An Environment Agency report [1] quotes from the Government’s 2008 Future Water strategy paper, saying the water industry used 7,900 GWh of energy in 2006/7 and emitted over 5 million tonnes for greenhouse gases. Supplying water and treating wastewater accounts for 0.8 per cent of the UK’s greenhouse gas emissions. That may sound like a small percentage but, according to Waterwise, Scottish Water is Scotland’s largest user of electricity [2], which demonstrates the significance of the water industry’s contribution to the UK’s greenhouse gas emissions.

According to the UK Government conversion factors for greenhouse gas reporting [3], 0.344 kg CO2e can be attributed to each cubic metre of mains water.

Water companies are tackling their emissions in a number of ways, including upgrading vehicle fleets, installing on-site solar power systems and advanced anaerobic digestion plants, and establishing natural wetland treatment sites. However, there is another important area where water companies are seeking to reduce their carbon footprints and that is by saving water.

First, water companies are investing in better techniques and technologies for finding and fixing leaks in the network of underground pipes. Second, there is a drive to reduce demand from consumers.

Metering is a key weapon in the fight to reduce demand and consumption – and thereby achieve Net Zero. On the one hand, the meter data can indicate if there is a leak while, on the other hand, visibility of consumption data encourages users to save water. Smart metering also opens the door to new tariff structures, such as rising block tariffs in which the unit charge rises for progressively higher volumes of water taken by customers. This acts as a further incentive to use less water.

In an ideal world, every user would have a meter that would be read sufficiently frequently to provide a clear picture of consumption – and leakage. However, it is not an ideal world and there are still households without meters, as well as commercial and industrial (C&I) users with meters that are classed as Long Unread Meters (LUM), or whose bills are based on Business Assessed price bands or estimates, rather than meter readings. Waterwise has recommended allowing water companies to introduce full metering, and for meters to be installed in the majority of homes by 2030 and the proportion of smart meters to be increased [2].

Whereas the electricity industry has gone a long way down the road with smart metering, there are significant challenges for implementing smart metering in the water industry. For example, water meters do not have an integral power supply unlike electricity meters, so smart water metering needs to be battery-powered. In addition, meters are typically installed below ground level, often submerged in water or mud.

Where water meter readings have been semi-automated, the systems have been proven to be less than ideal. For household meters fitted with sensors that transmit data over low powered radio or Bluetooth, it is still necessary for a person with a reading device to drive or walk close enough to the meter to collect the reading. C&I meters equipped with data loggers that calculate consumption based on pressure and flow or via the pulse output, but this technology can only calculate consumption, so periodic manual reads are still required.

Despite these known issues, Water UK strongly supports the use of smart metering rather than manual meters [4]. A report prepared for Water UK concluded that smart metering, in conjunction with a mandatory water labelling scheme (with minimum standards), was the best strategy for maximising demand reductions, with a forecast saving of 82 litres of water per household per day by 2065 [5].

Fortunately, there is now a technology that enables existing water meters to be retrofitted with smart functionality at far lower cost and without the drawbacks of conventional approaches. The hardware is battery-powered, withstands long-term submersion in water or mud, transmits a time/date stamped image of the register read via the GSM (mobile phone) network at intervals defined by the client. Installation only takes around 10 minutes, with no need to dismantle the meter or interrupt the supply.

Deer Technology’s patented LimpetReader is an ultra-compact opto-electronic device that attaches to an existing meter faceplate with optical tape or adhesive.  Each LimpetReader incorporates multiple micro-cameras for imaging the register. The images are date- and time-stamped before being transmitted by an AutoReader to Deer Technology’s secure server. When water meters are situated close together, multiple LimpetReaders can be connected to a single AutoReader.

Once the individual images have been uploaded to the server, they are stitched together to create a high-quality, distortion-free image of the meter’s register. Software then converts the register image to a numerical value, which is stored with the image. Data and images can be accessed by the customer in a variety of ways, depending on the requirements. Deer Technology’s comprehensive service covers everything from installation through to data management.

Water companies and consumers can utilise this technology to help identify leaks and reduce demand. LimpetReaders can play a significant role in helping to save water and, in turn, help the water industry achieve Net Zero.

The Environment Agency [1] says water metering alone can reduce a household’s consumption by 10-15 per cent, and smart metering and structured tariffs could achieve further reductions. Importantly, a proportion of the water saved by reducing demand and fixing leaks will be hot water. The carbon footprint of hot water is in the order of ten times higher than that of mains water due to the energy required to heat it.

Of course, there is another benefit of upgrading meters for remote reading: reduced emissions associated with meter readings. With conventional meters, somebody needs to travel in a van to and from the meter’s location. Despite multiple meters being read during each trip, the emissions per meter soon add up. Even if the vans are electric, there is still a significant carbon footprint associated with their manufacture, maintenance and end-of-life disposal.

Find out more about Deer Technology’s LimpetReader for remote meter reading at https://deertechnology.com, telephone 01639 363146 or email hello@deertechnology.com.

References: [1] ‘Greenhouse gas emissions of water supply and demand management options’, Environment Agency Science Report SC070010, July 2008. [2] ‘Water Efficiency Strategy for the UK’, Waterwise, June 2017. [3] ‘Greenhouse gas reporting: conversion factors 2020′, UK Government, https://www.gov.uk/government/publications/greenhouse-gas-reporting-conversion-factors-2020 (data retrieved 6 January 2022). [4] ‘Response to [Defra’s] Consultation on Reducing Personal Water Use’, Water UK, December 2019. [5] ‘Pathways to long-term PCC reduction’, ref AR1286, Artesia Consulting Ltd for Water UK, August 2019

  How can smarter metering help the water industry and consumers achieve Net Zero?

NEWS FEATURES FIRE & SECURITY SUBMISSIONS RESOURCES

[olko71]

New Post has been published on All about business online

New Post has been published on http://yaroreviews.info/2023/06/thames-water-in-funding-talks-amid-collapse-fears

Thames Water in funding talks amid collapse fears

PA Media

By Michael Race

Business reporter, BBC News

Thames Water is in talks to secure extra funding as the government says it is ready to act in a worst case scenario if the company collapses.

The water firm, which serves a quarter of the UK population, has billions in debt and is under pressure with its boss resigning unexpectedly on Tuesday.

The government said “a lot of work is going on behind the scenes” and it had a process in place “if necessary”.

Regardless of what happens, water supplies will continue as normal.

Even if the firm were to collapse, it would not happen imminently, the BBC understands.

The UK’s biggest water firm has been heavily criticised over its performance following a series of sewage discharges and leaks. Thames Water said it is trying to raise the cash it needs to improve.

It said it was keeping water regulator Ofwat informed on progress, and that it still had “strong” cash and borrowing reserves to draw on.

The firm leaks more water than any other water company in UK, losing the equivalent of up to 250 Olympic size swimming pools every day from its pipes.

If the firm cannot secure additional funding, it could be temporarily taken over by the government until a new buyer is found, in a special administration regime (SAR). This route was most recently taken with energy supplier Bulb after it ran into financial difficulties.

Asked about Thames Water in Parliament, environment minister Rebecca Pow said it was not her place to comment on the financial position of a company, but said water firms were “considered resilient”.

Earlier Business Secretary Kemi Badenoch said she was “very concerned” by the situation, adding “we need to make sure Thames Water as an entity survives”.

Thames Water boss quits after sewage spills

Thames Water bosses forgo bonuses over poor service – BBC News

On Tuesday, Thames Water’s chief executive Sarah Bentley quit the business after just two years in the job. It came weeks after she was asked to forgo her bonus over the company’s handling of sewage spills.

The firm has not given a reason for her departure. Earlier this year, Ms Bentley blamed the firm’s poor record on sewage management on failings at the company before her time.

“When we look back, we have decades of underinvestment which has led to cost-cutting and some poor decisions leaving the business in a really debilitating state,” she told the BBC in March.

Last year Thames Water’s owners – a consortium of institutional investors – pumped £500m into the business and pledged a further £1bn to help turn things around.

But the firm is understood to be struggling to raise the remaining cash which it needs to service its substantial debt pile, which is around £14bn. Interest payments on more than half of its debt are linked to the rate of inflation, which has soared over the last year.

Debt fears

Since 2016, profits have not covered the cost of paying interest on its debt, investment costs, and dividend payments, according to Russ Mould, investment director at AJ Bell.

Professor David Hall of University of Greenwich said investors are reluctant to take on the risk of further investment due to fears it will not be repaid.

He said the £500m of investment was the only time investors had put their own cash into the company since it was privatised in 1989, having instead raised cash for investment from customer bills.

For the last five years, its owners have backed the decision not to pay any dividends to external shareholders. It has however paid dividends internally to its parent company.

If the government is forced to step in, Professor Hall said shareholders rather than the public were likely to lose money.

Other water firms are facing similar pressures due to higher interest payments on their debts and rising costs including higher energy and chemical prices. Ofwat said last year that it was concerned about the financial resilience Yorkshire Water, SES Water and Portsmouth Water as well as Thames Water.

Water bills have been on the rise, with the annual bill for an average household in England and Wales hitting £448 in April.

Bills are set to rise again in 2025 by about £42 per household on average over a “long time frame”, former Environment Secretary George Eustice said on Wednesday.

It came after the Times reported bills could rise by as much as 40%, a figure Mr Eustice dismissed, saying it would be “far lower”.

Shadow energy secretary Ed Miliband said the situation at Thames Water was “an absolute scandal”.Asked whether the company should be nationalised, he replied: “I don’t think the answer to the water company’s crisis is to pay out billions of pounds to shareholders, when that money could be going into sorting out what is happening in the water industry”.

Separately, Chancellor Jeremy Hunt met with regulators, including Ofwat, early on Wednesday. He told them that they needed to “work at pace” to ensure businesses reflected any falling costs in the prices they charged customers.

Also at the meeting were regulators from the energy, financial and communications sectors, to face questions about whether there is a profiteering problem and what they are doing to tackle it.

Related Topics

Companies

Sewage

Thames Water

More on this story

Lib Dems unveil plan to overhaul water industry

47 minutes ago

Thames Water boss quits after sewage spills

23 hours ago

[girlinpride]

Waste Water Pumps Market key players analysis & distributors insight 2021

The report delivers the challenges in front of the Waste Water Pumps Market that allows the better understanding of the market and provides the lucrative opportunities that are available. Analyst has studied the current market scenario while concentrating on the new business objectives. Report includes change in customer requirements, customer preferences and the vendor landscape in the market.

Waste Water Pumps Market Report study provides in detail information to understand the imperative market parts that aligns with the business decision related to raw materials, demand, and production capacity. The analysis provides demands for the future, besides the opportunities that are available for individual. Study focuses on industry chain analysis, upstream and downstream raw material suppliers, key players, production process analysis, cost analysis, market distribution channels and major downstream buyers.

The Waste Water Pumps Market Report delivers analysis of various organizations, affiliation and new businesses. Study includes authorized estimations to develop better understanding of the organizations. Report provides the information about Key players in the market, manufacture analysis, market CAGR, production capacity, product segmentation, supplier analysis, trends and forecast. Research furthermore consolidates impact of government regulations and standards over the market.

Research analysis covers historical data from the year 2015 to 2019,In addition to this report considers 2021-28 as the forecast year. This helps manufacturers and clients understand the past trends and analyze the future trend. Competitive development like expansion of the plant, ventures, agreement, and acquisition are discussed in the report.

Access Full Report @ https://www.profsharemarketresearch.com/waste-water-pumps-market/

Waste Water Pumps Market report is segmented based on below parameters:

Global Waste Water Pumps Market: Product Types

· Centrifugal Pumps

· Positive Displacement Pumps

Global Waste Water Pumps Market: Applications

· Municipal Wastewater

· River Sewage

· Other

Global Waste Water Pumps Market: Company Analysis

· Grundfos

· Xylem

· Watson-Marlow

· KSB

· VETUS

· Wastecorp Pumps

Research study on Waste Water Pumps Market is based on following regions and countries:

North America

· U.S.A

· Canada

Europe

· France

· Germany

· Spain

· UK

· Rest of Europe

Asia Pacific

· China

· Japan

· India

· South East Asia

Latin America

· Brazil

Middle East and Africa

Waste Water Pumps Market Report delivers comprehensive analysis of :

· Challenges and Opportunities

· Emerging and Current market trends

· Market player Capacity, Production, Revenue (Value)

· Market Forecast for 2021-28

· Market growth drivers

· Supply (Production), Consumption, Export, Import analysis

· End user/application Analysis

About Profshare:

Profshare Market Research is a full service market research company that delivers in depth market research globally. We operate within consumer and business to business markets offering both qualitative and quantitative research services. We work for private sector clients, along with public sector and voluntary organizations. Profshare Market Research publishes high quality, in-depth market research studies, to help clients obtain granular level clarity on current business trends and expected future developments. We are committed to our client’s needs, providing custom solutions best fit for strategy development and implementation to extract tangible results.

Contact :

Prachi M.

Profshare Market Research

sales@profsharemarketresearch.com

[gobimservice]

Benefits Of Bim For Mep Designers - Bim Service Provider | GoBIM360

We live in an age where process automation is taking place. Every business process is getting digitalized slowly and steadily and every decision taken is derived by data. In the GoBIM360 fraternity and even on the site when construction needs to improve the productivity at every end and at every step through digitalization. GoBIM360 BIM service provider England (UK) is continuously evolving and we have witnessed great advancement in technologies when it comes to Building Information Modeling (BIM). It is used to effectively utilize the resources – time, material, manpower, etc. and collaborate and coordinate a part of every project stakeholder (Architects, Structural Engineers, MEP Engineers, Contractors, Subcontractors, Owners, etc.) to have minimal changes in construction ensuring that everything runs smoothly.

BIM in Building Design

  BIM plays a very important role for every stakeholder. Adaption of BIM benefits the four major pillars of  any construction project:

Design

Procurement

Construction

Facility Management

 In a building design, every stakeholder has a part/input, which means that it has to have a meaningful collaboration method and willingness to reach a common goal. A fun fact is that 92% (https://www.autodesk.com/autodesk-uiversity/class/Getting-MEP-Designers-Ready-BIM-2019#handout ) of the building information is not available when the designs are being made. This creates a lot of unawareness and can lead to changes orders (COs). The average percentage of changes orders in a project cost is typically at 10 percent. These changes in order lead to delay in overall project delivery. 30 percent of projects can’t meet the original schedule and budget.  This can be changed by implementing BIM.  BIM can help in reducing wastage of resources by 37 percentage.

  A few of the commonly known benefits that BIM brings in construction are:

3D representation

Quantity take-off based on the 3D BIM model

BIM in MEP Design

BIM is an intelligent, 3D model-based process that helps MEP professionals design, detail, document, and fabricate building systems more efficiently. With BIM, project teams improve collaboration, share data, and speed up project delivery from design to construction.

Working in a BIM process gives MEP project teams insight into design and constructability, to improve accuracy, reduce and resolve clashes, and optimize building systems design.

For Mechanical, Electrical and Plumbing Engineers/designers, BIM plays a major role at all fronts. BIM covers two major aspects in MEP design [1] Digital Engineering and, [2] Intelligent BIM.

Digital Engineering: MEP design BIM model is model-based and is data-driven. It will contain all the information and data requirements to be met by the building product manufacturers with technical and functional details. It will also apply calculations and help in generating data-driven MEP design. BIM not only helps in generating an MEP model but also allows collaboration and data sharing throughout the building life cycle.

Intelligent BIM: BIM brings together all the major stakeholders- MEP engineers, owners, product manufacturers, fabricators and contractors. It streamlines processes that support better design by utilizing

the model and its data. It helps in developing models with data-rich objects, and design automation for coordination with less wastage and at a lower cost.

The fabrication level of MEP coordination models provide detailed layout and spatial information of the Mechanical, Electrical and Plumbing elements of a design. BIM models will also identify and illustrate potential conflicts between these interdisciplinary trades with architectural design that must go hand-in-hand in one project.

MEP Coordination

image source: united bim

Trades of MEPFS Coordination

The trades of MEPFS Coordination are:

Mechanical System – HVAC Equipment and distribution such as Cooling tower, AHU, Ducting, etc.

Electrical System – Panels, switchboards, elevators, transformer, cable trays, etc.

Plumbing and Sanitary System – Pumps, water holding tanks, pool filtration equipment, Sump, sewage pit, grease and sand traps, etc.

Fire Safety System – Fire sprinkler pumps, sprinkler tanks fire shutter, smoke curtains, piping system, etc.

Outside of Building – External works, rooftop, and external face of a building, etc.

Benefits of BIM for MEP Designers

MEP designers have the tremendous advantage of using BIM. While CAD software provides the basic documentation of the work, BIM enables engineers and other building designers, construction, and building managers to plan and think all the aspects of the building in 3D from the beginning of the plan to the end and even for the future alteration.

Information that has been stored with the 3D model of BIM makes it easier for all the stakeholders to analyze and collaborate in the entire building process. It makes the task of cost estimation, calculating energy load, and creating heating and air conditioning (HVAC) systems, easy and sustainable.

Along with the basic advantages of saving money and time the additional benefits of BIM in MEP includes:

Better building design

Streamlining of Information

Proficient support and improvement in lifecycle management

Powerful structure execution plan

Improved building schedule

Great level of flexibility

Clash Detection in an early stage of the project

Minimization of Risk

Accurate estimation of raw material

Proficient building performance analysis

Proficient building performance analysis

Improve maintenance and lifecycle management

Wrapping up

While MEP services work as the nerve of the construction industry, BIM services act as the perfect valve for this industry. It ensures the swift and smooth functioning of the entire project. Building Information Modelling has many benefit for the MEP Designers, CAD Autodesk. They can optimize the design to a great extent, reduce the risk and improve the accuracy and constructability of the entire project.

Source:- https://www.united-bim.com/bim-for-mep-designers/