#Softraid convert volume

[motogreys]

Softraid convert volume

Softraid convert volume cracked#

Softraid convert volume license key#

Softraid convert volume serial#

Softraid convert volume driver#

This especially affected the log entries for disks which are predicted to fail (SR-407). Fixed a bug in the SoftRAID Monitor which caused some log entries to be truncated.This version warns a user every time the startup or restart (SR-68). Older versions of SoftRAID would only warn a user once.

Softraid convert volume driver#

Fixed a bug in the SoftRAID Crack driver which prevented it from warning users if a volume was missing a disk.

Fixed a bug which caused Tech Support Reports to sometimes be missing volume headers (SR-238).

This would happen if you configured email notification to send an email on reboot.

Fixed a bug in the SoftRAID Monitor which caused it to sometimes skip the SMART test on startup.

Softraid convert volume serial#

Fixed several broken links in the SoftRAID serial code mac On-line help (SR-386).

Fixed a bug in the SoftRAID 5.5.6 license keys driver which caused the SoftRAID Crack Monitor status indicator in the menu bar to go yellow whenever a mirror read-only secondary volume was attached.

Softraid convert volume cracked#

Fixed a bug in the SoftRAID patch cracked Monitor which caused it to display the “Disk is missing from a mirror volume” dialog even when this preference was disabled (SR-413).The filename was causing DiskWarrior to say that the file was incorrectly encoded (SR-415). Fixed a problem with the filename of the Japanese QuickStart Guide.Fixed a bug in the SoftRAID application which caused big pipes connected to the volume tiles to be missing 2 pixels on their left side when displayed on Macs with Retina displays (SR-374).This primarily affected the SoftRAID_Email.log file when SMTP logging was enabled. Fixed a bug in the SoftRAID Registration keys mac Monitor which could cause log entries to be corrupted or incomplete.The volume tile now updates immediately when the user enables or disables the volume’s safeguard (SR-320).The SoftRAID application no longer crashes when you attempt to create a volume with more than 16 disks (SR-399).Fixed problem which caused certifying 4 Kn disks (disks with 4 KB sectors).

Softraid convert volume license key#

Fixed a bug in the SoftRAID License Key driver which could cause some RAID 1+0 volumes to fail early in the rebuild process with a disk error (SR-381).

Fix a bug in the SoftRAID driver which causes disk errors in mirror and RAID 1+0 volumes (SR-416).

This would only happen if more than one secondary disk was missing or out of sync.

Fixed a bug in SoftRAID driver which could cause mirror volumes to rebuild instantly, leaving secondary disks with invalid data.

Fixed a bug in the SoftRAID 5.5.6 Crack and keygen Monitor which prevented it from reliably sending email notifications.

Softraid 5 1 (a) freeload Download.

Just click the help button in any SoftRAID window or dialog box and SoftRAID will display the relevant help page. There are over 100 pages of information to help you understand SoftRAID’s great features and help setup your volumes for your particular use. SoftRAID does include an extensive help section in the application itself. You can even have the SoftRAID Monitor notify you via email whenever there is a problem. You can test a disk before you start using it, monitor it for defects. SoftRAID can also create RAID 4 and RAID 5 volumes. You can convert your AppleRAID stripe volume to a RAID 1+0 volume. SoftRAID supports RAID 4, RAID 5 and RAID 1+0 volumes. SoftRAID 5.8.1 add to watchlist send us an update. Windows silicon image sii 3114 softraid 5 controller freeload - Silicon Image SiI 3114 SATALink Controller, Silicon Image SiI 3114 SATARaid Controller, Silicon Image SiI 3114 SATALink. Download WordPress today, and get started on creating your website with one of the most powerful, popular, and customizable platforms in the world.

[wnmnblog]

OWC USB-C Travel Dock For Mac Or PC Here Now

OWC USB-C Travel Dock For Mac Or PC Here Now

OWC Holdings, Inc., a division of OWC, a leading zero emissions Mac and PC technology company, announced today the launch of SoftRAID v. 5.6.3, an update and bug fix release, which makes SoftRAID compatible with macOS 10.13 High Sierra. SoftRAID http://www.softraid.com keeps precious files protected against disk failure — ideal for everyone who needs to safely store and quickly access large amounts of data, including photographers, videographers, editors, audio producers, web designers, database and media managers, advertisers, archivers, and more. SoftRAID 5.6.3 features a highly optimized driver, which provides a software RAID solution that equals and can often exceed the performance and reliability of dedicated hardware RAID controllers. In addition, SoftRAID provides advanced disk testing, logging, disk health monitoring, and a unique disk failure prediction system for advanced warning of potential disk problems to protect users from catastrophic data loss.

Easy Setup Automatically Guides Less Technical Users through Setup

SoftRAID guides less technical users through the process of creating SoftRAID volumes, automating the process of configuring disks and making recommendations to help users setup their SoftRAID system. All users have to do is decide what the RAID volume will be used for and how much space to use (with hints from the application) — SoftRAID Easy Setup does the rest.

Key Changes/Bug Fixes in SoftRAID v. 5.6.3 • Now compatible with macOS High Sierra:* o SoftRAID 5.6.3’s certify, verify, and monitoring features work with APFS formatted disks (Note: SoftRAID 5.6.3 does not support creating, modifying or converting APFS volumes). o Driver modifications ensure that disks do not hang as a result of changes in macOS High Sierra’s kernel features. o Driver now uses fewer threads — no more than 1 thread per disk for disk update operations, since macOS High Sierra limits the number of threads which can run at one time. o Driver has been changed to handle disk errors better.

• Fixes driver loading to ensure that the correct driver is installed the first time and that newly updated drivers are always loaded. In previous versions, it was possible for older cached versions of the driver to be loaded by mistake under certain circumstances. • Driver no longer reports read errors on stripe (RAID 0) volumes as write errors. • The command line interface of the SoftRAID Tool no longer returns an error every time the disk unmount command is used. In previous versions, this command used to unmount all volumes, which use a given disk and would return an error even if it was successful. • Also includes numerous bug fixes, details of which can be found in the release notes at: http://ift.tt/2xjBP4l.

SoftRAID Key Features: • Supports all versions of Mac OS X from 10.6.8 through macOS High Sierra 10.13. • Disk Error Reporting: SoftRAID monitors and logs all disk errors often ignored by macOS. • Email Notifications: available with full version of SoftRAID only. • Predictive Failure Analysis: provides advanced warning of imminent disk failure on all disks which support SMART, most USB 3, 3.1 and USB-C disks (enclosures) and also many USB 2.0, FireWire 400 and 800 disks. • Certify Disk: guarantees disks reliably read and write data (destructive, ideal for new disks). • Verify Disk: ensures entire disk can be read (non-destructive test for any-time use). • Validate Volume: confirms that entire volume is readable and all parity data is correct. • Supports all Intel based Macs with Core Duo 2 processors or later. • Supports Thunderbolt 1, 2 & 3, eSATA, SAS, FireWire and USB 2.0, 3.0, 3.1 and USB-C. • Converts AppleRAID stripe (RAID 0) and mirror (RAID 1) volumes to SoftRAID. • Supports RAID 0, 1, 4, 5 and 1+0 (and non-RAID volumes) – (RAID 4, 5 and 1+0 volumes not available with SoftRAID Lite). • Supports TRIM for SSDs on all SoftRAID RAID levels. • All SoftRAID volumes can be startup volumes. • Supports volumes up to 4 petabytes (4,000 TB). • Supports up to 16 disks per volume and up to 32 volumes per Mac. • Automatic rebuilding of out-of-sync RAID volumes. • Fast rebuilds for accelerated rebuild times. • I/O and error counters for every SoftRAID disk and volume. • Extended disk information including: hours of use, reallocated sector counts and media wear for SSDs. • Disk labeling and LED blinking to aid in disk identification. • Extensive logging of SoftRAID events. • Command line interface with dedicated man page (not available with SoftRAID Lite). • Built-in recovery tools for recovering severely damaged partition maps.

SoftRAID version 5.6.3 is compatible with all versions of Mac OS X from 10.6.8 through the latest release of macOS 10.13 High Sierra. SoftRAID works hard to ensure that their software is ready for every new mac OS release. via IFTTT https://youtu.be/g1Sf2oJsFck

[wnmnblog]

OWC USB-C Travel Dock For Mac Or PC Here Now

OWC USB-C Travel Dock For Mac Or PC Here Now

OWC Holdings, Inc., a division of OWC, a leading zero emissions Mac and PC technology company, announced today the launch of SoftRAID v. 5.6.3, an update and bug fix release, which makes SoftRAID compatible with macOS 10.13 High Sierra. SoftRAID http://www.softraid.com keeps precious files protected against disk failure — ideal for everyone who needs to safely store and quickly access large amounts of data, including photographers, videographers, editors, audio producers, web designers, database and media managers, advertisers, archivers, and more. SoftRAID 5.6.3 features a highly optimized driver, which provides a software RAID solution that equals and can often exceed the performance and reliability of dedicated hardware RAID controllers. In addition, SoftRAID provides advanced disk testing, logging, disk health monitoring, and a unique disk failure prediction system for advanced warning of potential disk problems to protect users from catastrophic data loss.

Easy Setup Automatically Guides Less Technical Users through Setup

SoftRAID guides less technical users through the process of creating SoftRAID volumes, automating the process of configuring disks and making recommendations to help users setup their SoftRAID system. All users have to do is decide what the RAID volume will be used for and how much space to use (with hints from the application) — SoftRAID Easy Setup does the rest.

Key Changes/Bug Fixes in SoftRAID v. 5.6.3 • Now compatible with macOS High Sierra:* o SoftRAID 5.6.3’s certify, verify, and monitoring features work with APFS formatted disks (Note: SoftRAID 5.6.3 does not support creating, modifying or converting APFS volumes). o Driver modifications ensure that disks do not hang as a result of changes in macOS High Sierra’s kernel features. o Driver now uses fewer threads — no more than 1 thread per disk for disk update operations, since macOS High Sierra limits the number of threads which can run at one time. o Driver has been changed to handle disk errors better.

• Fixes driver loading to ensure that the correct driver is installed the first time and that newly updated drivers are always loaded. In previous versions, it was possible for older cached versions of the driver to be loaded by mistake under certain circumstances. • Driver no longer reports read errors on stripe (RAID 0) volumes as write errors. • The command line interface of the SoftRAID Tool no longer returns an error every time the disk unmount command is used. In previous versions, this command used to unmount all volumes, which use a given disk and would return an error even if it was successful. • Also includes numerous bug fixes, details of which can be found in the release notes at: http://ift.tt/2xjBP4l.

SoftRAID Key Features: • Supports all versions of Mac OS X from 10.6.8 through macOS High Sierra 10.13. • Disk Error Reporting: SoftRAID monitors and logs all disk errors often ignored by macOS. • Email Notifications: available with full version of SoftRAID only. • Predictive Failure Analysis: provides advanced warning of imminent disk failure on all disks which support SMART, most USB 3, 3.1 and USB-C disks (enclosures) and also many USB 2.0, FireWire 400 and 800 disks. • Certify Disk: guarantees disks reliably read and write data (destructive, ideal for new disks). • Verify Disk: ensures entire disk can be read (non-destructive test for any-time use). • Validate Volume: confirms that entire volume is readable and all parity data is correct. • Supports all Intel based Macs with Core Duo 2 processors or later. • Supports Thunderbolt 1, 2 & 3, eSATA, SAS, FireWire and USB 2.0, 3.0, 3.1 and USB-C. • Converts AppleRAID stripe (RAID 0) and mirror (RAID 1) volumes to SoftRAID. • Supports RAID 0, 1, 4, 5 and 1+0 (and non-RAID volumes) – (RAID 4, 5 and 1+0 volumes not available with SoftRAID Lite). • Supports TRIM for SSDs on all SoftRAID RAID levels. • All SoftRAID volumes can be startup volumes. • Supports volumes up to 4 petabytes (4,000 TB). • Supports up to 16 disks per volume and up to 32 volumes per Mac. • Automatic rebuilding of out-of-sync RAID volumes. • Fast rebuilds for accelerated rebuild times. • I/O and error counters for every SoftRAID disk and volume. • Extended disk information including: hours of use, reallocated sector counts and media wear for SSDs. • Disk labeling and LED blinking to aid in disk identification. • Extensive logging of SoftRAID events. • Command line interface with dedicated man page (not available with SoftRAID Lite). • Built-in recovery tools for recovering severely damaged partition maps.

SoftRAID version 5.6.3 is compatible with all versions of Mac OS X from 10.6.8 through the latest release of macOS 10.13 High Sierra. SoftRAID works hard to ensure that their software is ready for every new mac OS release. via IFTTT https://youtu.be/g1Sf2oJsFck

[wnmnblog]

OWC New USB-C Travel Dock For Mac Or PC

OWC New USB-C Travel Dock For Mac Or PC

OWC Holdings, Inc., a division of OWC, a leading zero emissions Mac and PC technology company, announced today the launch of SoftRAID v. 5.6.3, an update and bug fix release, which makes SoftRAID compatible with macOS 10.13 High Sierra. SoftRAID http://www.softraid.com keeps precious files protected against disk failure — ideal for everyone who needs to safely store and quickly access large amounts of data, including photographers, videographers, editors, audio producers, web designers, database and media managers, advertisers, archivers, and more. SoftRAID 5.6.3 features a highly optimized driver, which provides a software RAID solution that equals and can often exceed the performance and reliability of dedicated hardware RAID controllers. In addition, SoftRAID provides advanced disk testing, logging, disk health monitoring, and a unique disk failure prediction system for advanced warning of potential disk problems to protect users from catastrophic data loss.

Easy Setup Automatically Guides Less Technical Users through Setup

SoftRAID guides less technical users through the process of creating SoftRAID volumes, automating the process of configuring disks and making recommendations to help users setup their SoftRAID system. All users have to do is decide what the RAID volume will be used for and how much space to use (with hints from the application) — SoftRAID Easy Setup does the rest.

Key Changes/Bug Fixes in SoftRAID v. 5.6.3 • Now compatible with macOS High Sierra:* o SoftRAID 5.6.3’s certify, verify, and monitoring features work with APFS formatted disks (Note: SoftRAID 5.6.3 does not support creating, modifying or converting APFS volumes). o Driver modifications ensure that disks do not hang as a result of changes in macOS High Sierra’s kernel features. o Driver now uses fewer threads — no more than 1 thread per disk for disk update operations, since macOS High Sierra limits the number of threads which can run at one time. o Driver has been changed to handle disk errors better.

• Fixes driver loading to ensure that the correct driver is installed the first time and that newly updated drivers are always loaded. In previous versions, it was possible for older cached versions of the driver to be loaded by mistake under certain circumstances. • Driver no longer reports read errors on stripe (RAID 0) volumes as write errors. • The command line interface of the SoftRAID Tool no longer returns an error every time the disk unmount command is used. In previous versions, this command used to unmount all volumes, which use a given disk and would return an error even if it was successful. • Also includes numerous bug fixes, details of which can be found in the release notes at: http://ift.tt/2xjBP4l.

SoftRAID Key Features: • Supports all versions of Mac OS X from 10.6.8 through macOS High Sierra 10.13. • Disk Error Reporting: SoftRAID monitors and logs all disk errors often ignored by macOS. • Email Notifications: available with full version of SoftRAID only. • Predictive Failure Analysis: provides advanced warning of imminent disk failure on all disks which support SMART, most USB 3, 3.1 and USB-C disks (enclosures) and also many USB 2.0, FireWire 400 and 800 disks. • Certify Disk: guarantees disks reliably read and write data (destructive, ideal for new disks). • Verify Disk: ensures entire disk can be read (non-destructive test for any-time use). • Validate Volume: confirms that entire volume is readable and all parity data is correct. • Supports all Intel based Macs with Core Duo 2 processors or later. • Supports Thunderbolt 1, 2 & 3, eSATA, SAS, FireWire and USB 2.0, 3.0, 3.1 and USB-C. • Converts AppleRAID stripe (RAID 0) and mirror (RAID 1) volumes to SoftRAID. • Supports RAID 0, 1, 4, 5 and 1+0 (and non-RAID volumes) – (RAID 4, 5 and 1+0 volumes not available with SoftRAID Lite). • Supports TRIM for SSDs on all SoftRAID RAID levels. • All SoftRAID volumes can be startup volumes. • Supports volumes up to 4 petabytes (4,000 TB). • Supports up to 16 disks per volume and up to 32 volumes per Mac. • Automatic rebuilding of out-of-sync RAID volumes. • Fast rebuilds for accelerated rebuild times. • I/O and error counters for every SoftRAID disk and volume. • Extended disk information including: hours of use, reallocated sector counts and media wear for SSDs. • Disk labeling and LED blinking to aid in disk identification. • Extensive logging of SoftRAID events. • Command line interface with dedicated man page (not available with SoftRAID Lite). • Built-in recovery tools for recovering severely damaged partition maps.

SoftRAID version 5.6.3 is compatible with all versions of Mac OS X from 10.6.8 through the latest release of macOS 10.13 High Sierra. SoftRAID works hard to ensure that their software is ready for every new mac OS release. via IFTTT https://youtu.be/JfQiPJ8qPAg

[wnmnblog]

OWC New USB-C Travel Dock For Mac Or PC

OWC New USB-C Travel Dock For Mac Or PC

OWC Holdings, Inc., a division of OWC, a leading zero emissions Mac and PC technology company, announced today the launch of SoftRAID v. 5.6.3, an update and bug fix release, which makes SoftRAID compatible with macOS 10.13 High Sierra. SoftRAID http://www.softraid.com keeps precious files protected against disk failure — ideal for everyone who needs to safely store and quickly access large amounts of data, including photographers, videographers, editors, audio producers, web designers, database and media managers, advertisers, archivers, and more. SoftRAID 5.6.3 features a highly optimized driver, which provides a software RAID solution that equals and can often exceed the performance and reliability of dedicated hardware RAID controllers. In addition, SoftRAID provides advanced disk testing, logging, disk health monitoring, and a unique disk failure prediction system for advanced warning of potential disk problems to protect users from catastrophic data loss.

Easy Setup Automatically Guides Less Technical Users through Setup

SoftRAID guides less technical users through the process of creating SoftRAID volumes, automating the process of configuring disks and making recommendations to help users setup their SoftRAID system. All users have to do is decide what the RAID volume will be used for and how much space to use (with hints from the application) — SoftRAID Easy Setup does the rest.

Key Changes/Bug Fixes in SoftRAID v. 5.6.3 • Now compatible with macOS High Sierra:* o SoftRAID 5.6.3’s certify, verify, and monitoring features work with APFS formatted disks (Note: SoftRAID 5.6.3 does not support creating, modifying or converting APFS volumes). o Driver modifications ensure that disks do not hang as a result of changes in macOS High Sierra’s kernel features. o Driver now uses fewer threads — no more than 1 thread per disk for disk update operations, since macOS High Sierra limits the number of threads which can run at one time. o Driver has been changed to handle disk errors better.

• Fixes driver loading to ensure that the correct driver is installed the first time and that newly updated drivers are always loaded. In previous versions, it was possible for older cached versions of the driver to be loaded by mistake under certain circumstances. • Driver no longer reports read errors on stripe (RAID 0) volumes as write errors. • The command line interface of the SoftRAID Tool no longer returns an error every time the disk unmount command is used. In previous versions, this command used to unmount all volumes, which use a given disk and would return an error even if it was successful. • Also includes numerous bug fixes, details of which can be found in the release notes at: http://ift.tt/2xjBP4l.

SoftRAID Key Features: • Supports all versions of Mac OS X from 10.6.8 through macOS High Sierra 10.13. • Disk Error Reporting: SoftRAID monitors and logs all disk errors often ignored by macOS. • Email Notifications: available with full version of SoftRAID only. • Predictive Failure Analysis: provides advanced warning of imminent disk failure on all disks which support SMART, most USB 3, 3.1 and USB-C disks (enclosures) and also many USB 2.0, FireWire 400 and 800 disks. • Certify Disk: guarantees disks reliably read and write data (destructive, ideal for new disks). • Verify Disk: ensures entire disk can be read (non-destructive test for any-time use). • Validate Volume: confirms that entire volume is readable and all parity data is correct. • Supports all Intel based Macs with Core Duo 2 processors or later. • Supports Thunderbolt 1, 2 & 3, eSATA, SAS, FireWire and USB 2.0, 3.0, 3.1 and USB-C. • Converts AppleRAID stripe (RAID 0) and mirror (RAID 1) volumes to SoftRAID. • Supports RAID 0, 1, 4, 5 and 1+0 (and non-RAID volumes) – (RAID 4, 5 and 1+0 volumes not available with SoftRAID Lite). • Supports TRIM for SSDs on all SoftRAID RAID levels. • All SoftRAID volumes can be startup volumes. • Supports volumes up to 4 petabytes (4,000 TB). • Supports up to 16 disks per volume and up to 32 volumes per Mac. • Automatic rebuilding of out-of-sync RAID volumes. • Fast rebuilds for accelerated rebuild times. • I/O and error counters for every SoftRAID disk and volume. • Extended disk information including: hours of use, reallocated sector counts and media wear for SSDs. • Disk labeling and LED blinking to aid in disk identification. • Extensive logging of SoftRAID events. • Command line interface with dedicated man page (not available with SoftRAID Lite). • Built-in recovery tools for recovering severely damaged partition maps.

SoftRAID version 5.6.3 is compatible with all versions of Mac OS X from 10.6.8 through the latest release of macOS 10.13 High Sierra. SoftRAID works hard to ensure that their software is ready for every new mac OS release. via IFTTT https://youtu.be/JfQiPJ8qPAg