#Rope Making Machines 25-55 mm
Explore tagged Tumblr posts
akiropes · 2 years ago
Text
0 notes
secretladyspizza · 3 years ago
Text
The Ultimate Guide to Men’s Custom Chains
For most men’s chains, 50 cm (20”) is the average length. This falls at the collar bone between the top two buttons on a shirt and looks good inside or outside the shirt. If you’re wearing a pendant necklace, opt for 55-63 cm (22-25”) so the pendant finishes in the middle of your chest.
35-45 cm (14-18”) – Quite form-fitting and will be visible above your shirt.
50-55 cm (20-22”) – Falls at the collarbone and is the most common size for men’s necklaces. Can be worn inside or outside the shirt.
55-61 cm (22-24”) – Falls in the middle of the chest and looks great with a medallion, pendant, or dog tags. Can be worn inside or outside the shirt.
61-76 cm (24-30”) – Designed to be worn on the outside of your shirt. Looks best with a larger pendant or a thicker chain. Total attention-grabber.
If you’re only wearing a chain (and aren’t looking for a statement-making necklace), a width of 2-6 mm is a good start. When adding a pendant, make sure it fits the chain and isn’t overpowered by its thickness. If you’re looking for a wholesale men's chunky chain necklace that falls in the ‘bling’ category, shop for 12 mm or wider. Chain width and length go hand and hand, so make sure they’re proportional to each other – in other words, no 35 cm (14″) chains with 12 mm width.
1-6 mm – This ranges from the discreetly thin to the standard width of most men’s necklaces. Can easily go under your shirt.
6-10 mm – This necklace width works well for pendants and chains outside of your shirt.
10-X mm – You’ve entered the ‘I wore this to impress’ zone. Necklaces of more than 10 mm (the thickness of recent iPhones) are worn to garner attention.
Most men’s necklaces fall into this type. A chain is a strand of rings, discs, or beads that interlock. While that sounds simple enough, there are countless variations and styles of chain necklaces to choose from… not to mention an array of clasp styles. You’ll want a clasp that supports the weight of the chain and fastens easily (especially if you get dressed alone).
Types Of Custom Chains For Men
Cable Chain – The cable chain is the most popular type of chain necklace for men. It’s created from connecting oval links and resembles an actual chain. Alone, cable chains aren’t the most statement-making necklace on the market, but they’re great for holding a cross, coin, or pendant.
Curb Chain – Curb chain necklaces are made of links that interlock when they lay flat. You’ll often see thick, chunky curb chains used in street and urban style. Cuban chains or Cuban link chains are popular variations of the curb chain necklace.
Marine Chain/Anchor Chain – For all the sea lovers out there, the marine chain necklace is inspired by anchor chains used on ships. Each oval link has a horizontal bar across the middle and interlocks like cable chains and lies flat like curb chains.
Figaro Chain – With its roots in Italy, the Figaro chain gets its name from the title character in The Barber of Seville, a famous Italian opera. This necklace is special because of its pattern of flat oval links. Typically, the pattern is of 1 large link followed by 2-3 shorter links. The Figaro chain necklace is a variation of the curb chain.
Rope Chain – The rope chain consists of chain links twisted together and resembles a rope. Rope chain necklaces are known for their strength and are often used with pendants.
Wheat Chain – In a men's gold wheat chain necklace, oval links are plaited together in the same direction to look like tips of wheat stalks. Wheat chains are often used with pendants.
Ball Chain – The ball chain (bead chain) is most often used for dog tags and keychains. It consists of ball-shaped links connected with or without small breaks.
Herringbone Chain – The herringbone chain is a flat necklace characterized by v-shaped links in alternating directions. It’s often confused with an Omega chain which has a similar design but is made from flat pieces in a curved design. Herringbone chains are not as flexible as Omegas and are prone to kink. Both are notorious for pulling and pinching the finer hairs on your neck – a great reason for staying groomed.
Box Chain – Square links give the box chain its name. Box chain necklaces are found in a variety of widths and are great for hanging pendants.
Snake Chain – A variation of herringbone and omega chains, snake chains are made from tightly connected plates or bands that resemble snakeskin. The result is a smooth, round zig-zag pattern. Known for being delicate, they’re great with pendants.
Hip Hop Custom Chains
Hip hop chains come in various styles, materials, and sizes. They can come in silver, gold, or iced out, and in all different types of styles; that’s the cool thing about these accessories, you have so much to choose from! Most chains range from 5 to 9 mm and 30 to 40 inches in length; however, you want to make sure you have a long enough link just in case you want to put a pendant on it. The most popular styles are Cuban, box, rope, snake, or Franco chain. Depending on your type of swag your favorite kind of rapper chains may vary. Come to Churinga and customize your own hip-hop chains.
Click hip hop jewellery wholesale if you want to know more.
Do stainless steel chains last?
Roughly, 316 stainless steel wholesale chain necklaces can last for up to 25 years with little maintenance. Although they can lose their shine and need re-polishing after a few years of wearing the wholesale 316 stainless steel chains, the cost and frequency of maintenance are low compared to other jewelry metals.
Do stainless steel chains tarnish?
Wheat chain stainless steel is durable and resists corrosion and oxidation. Our jewelry will not rust, tarnish, or turn your skin green, even if worn daily. More reasons why stainless steel hip hop jewelry wholesale chains are the best… … Unlike many other metals, these are safe to wear and no harm will come if you wear stainless steel chains wholesale for life.
What brand of jewelry does factory connection sale?
Shop factory direct jewelry from Churinga Stainless Steel Jewelry Factory/Manufacturer in China. Over 5000 designs are available in stock! Browse Churinga 316L Stainless Steel Jewelry for the latest designs of Earrings/Rings/Bracelets/Necklaces/Pendants, All at attractive wholesale prices Manufacturer by Churinga Jewelry. We provide the largest selection of wholesale stainless steel costume jewelry, wholesale stainless steel gold plated Jewelry, wedding engagement rings, etc. Shop at unecklace.com if you want to go into the jewelry business.
Check out our stainless steel necklace chain bulk selection for the very best in unique or custom from Churinga stainless steel necklace wholesale shop.
Custom Chains Details📷📷📷📷📷📷Who is the best jewelry factory in China?
Churinga is the best jewelry factory in China. Churinga is one of the best jewelry factory brands in China.
Churinga is affiliated with Hotsell Company Limited, and it is a professional fashion jewelry manufacturer in China, set design, production, wholesale, and export trade as one of the enterprises. Product substrate metals are stainless steel, copper alloy, and silver, a surface thin layer of gold plated, rhodium plated or palladium plating, auxiliary material with artificial gem (synthetic cubic zirconia, synthetic crystal, synthetic ruby, etc).
Product variety, style fashion, good quality, which covers rings, pendants, earrings, bracelets, necklaces, anklets, bangles, jewelry sets, etc. Our series products are sold all over the world, we provide good services to all of the customers at home and abroad.
We are one of the Chinese leading Jewelry manufacturers providing high-quality jewelry with fast delivery and the most competitive pricing. Customized service is our professional offer.
Churinga Jewelry Factory Team
📷
Churinga Jewelry Factory Certifications
📷
How does a jewelry factory?HOW IS JEWELRY MADE? WHAT IS THE PROCESS OF MAKING JEWELRY?STEP 1: DESIGNING A 3D JEWELRY MODEL
After the initial idea and/or sketch is developed, it’s time to start work on the digital model. Using CAD (Computer-Aided Design) software, the 3d designer will make a digital render of your jewelry.
STEP 2: 3D WAX PRINTING YOUR JEWELRY
In most modern jewelry production, the manufacturer uses a 3d printing machine to print a wax model made out of resin, which usually doesn’t take more than 48 hours.
The Rubber Mold
The original model is encased in plaster-like investment, which is specially created for jewelry making. After the investment sets, the encased wax model is burned away in an oven, leaving a jewelry-shaped void in the hardened investment. That space is filled with silver, forming a slightly smaller duplicate of the original wax design, which is polished to perfection. The silver master model is then packed into a fat sandwich of special mold rubber and squeezed tight under high heat and pressure until it forms a solid block. The rubber forms itself around the master model, creating a perfect three-dimensional impression of the piece of jewelry. The rubber is cut in half to remove the silver master. Then the rubber is put back together and hot wax is injected through a hole in the rubber to fill the ring-shaped space inside, forming a wax reproduction of the master model (but a bit smaller).
The Wax Tree
To finally turn wax into gold, a number of wax models, usually 10 or 20 are placed on a large branching wax tree. Positioning each piece on the tree must be done carefully, thicker pieces will go on the bottom, thinner on the top and the joint where the piece is joined to each branch must be positioned in a thick place in the design, where there is no detail, like the back of a ring. When the tree is complete, the whole wax structure is placed in a flask.
STEP 3: CASTING THE WAX MODEL INTO METAL
The jewelry goes through the casting process. At this stage, your piece starts looking more like the jewelry you might see in a store. The wax is melted away and is replaced with your metal of choice in molten form, usually gold, silver, or platinum. The metal then dries into the shape of your jewelry. This technique is called “lost wax” casting.
STEP 4: THE PRE-POLISH
First, the jewelry has to be removed from the branch, or sprue, that held it to the tree in the mold. It is then is tumbled into smoothness, sometimes sanded, lapped to make edges crisp, and then buffed by hand on a polishing wheel.
STEP 5: BASIC JEWELRY ASSEMBLY
After your jewelry passes through the design and casting stage, the final fabrication can take anywhere from 3 days to 3 weeks. At this point, the jeweler refines the main structure of your ring, necklace, or another piece.
STEP 6: THE STONE SETTING PROCESS
For this step, the diamond setter finally adds the diamonds or other gemstones onto your piece. He carefully sets the central stone into the mount. If side stones are involved, the setter needs to hand drill for these before setting. Using a microscope, they then set each separate stone.
STEP 7: POLISHING, FINISHING, AND QUALITY ASSURANCE
In the final stage, a polisher works to make sure the metal is polished to perfection so it’s as shiny as possible. Or it only needs a light final polish to bring out the luster and shine of the gold. This is done by putting a fine red jeweler’s rouge on a soft cotton cloth and buffing the piece by hand, making sure that all the details and highlights shine. Finally, the jewelry is inspected and each detail is analyzed to make sure production was successful.
📷
Churinga Jewelry Factory Shipping And Payment
We support global supply. Meet your jewelry business with optimal efficiency.
📷
Jewelry Stores Near Me – Churinga Jewelry Factory
📷
Churinga Jewelry Factory FAQ
Q1: Are you direct factory wholesale?
A1:Yes, we are direct factory manufacture with more than 10 years experience. Over 200 new arrivals are launched each month. welcome, contact our customer service to know more details.
Q2: Can I place a sample order?
A2:Yes, we welcome samples to check the quality, mixed samples are acceptable. Depending on the design, the design fee charged for samples is $30-$50, and the sample fee will be refunded when ordering in bulk.
Q3: Can I get mixed products?
A3: Yes. Mix color and designs are available.
Q4: Is there a discount for larger orders of Jewelry?
A4: For new customers, there is a small discount, but when the value of the order is increased, we will provide a larger discount. For previous customers, we are happy to provide a discount for your loyalty. Please enquire.
Q5: How to place an order?
A5: You can choose some items you like online, or you can write down the item/code number, with quantities you want, contact our customer service to place an order.
Q6: Can I get one customized sample that laser my logo or make my design?
A6: Yes, OEM or ODM is welcome. customized designs, materials, sizes & colors are available. our designer will according to your picture or ideas to draw/design pictures. The product will arrange production when you confirm. We are willing to provide you with one/two samples for your testing of our design and quality. Sample charged the US $20-100/design depends on the design, sample charge will refund upon bulk order.
Q7: What is the lead time?
A7: It depends on the order quantity and the season you place the order. Generally, it is 2-3 days after getting payment if the goods are in stock. If it is not in stock, normally 7-15 days for small quantity and simple style, and about 25-30 days for large quantity and complicated style. Please kindly contact us and we will provide you with an estimated production time more exactly based on your need.
Q8: When can I get the quotation?
A8: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation. Please call us or tell us in your mail, so that we could regard your inquiry priority.
Q9: What’s your after-sales service?
A9: We will have a full inspection before the order ship out, but once you find any defective/short of quantity/other problem, pls send us the related pictures by email within one week, we will suggest to you our best solution to satisfy your requirement.
0 notes
akiropes · 4 months ago
Text
Rope Making Machine Manufacturer & Exporter | Aawadkrupa Plastomech
Rope Making Machine Manufacturer & Exporter | Akiropes
Tumblr media
Are you in search of top-quality rope making machinery? Look no further than Akiropes, the leading manufacturer and exporter of rope making machines in India. With a global presence spanning over 65 countries, Akiropes has earned a reputation for excellence, offering competitive prices, round-the-clock support, and on-time delivery.
Superior Quality, Global Reach
Akiropes takes pride in its commitment to producing rope making machines of unparalleled quality. With a focus on precision engineering and advanced technology, their machines are built to deliver exceptional performance and durability. Whether you're in need of a machine for manufacturing nylon ropes, plastic ropes, or any other type of rope, Akiropes has the solution to meet your needs.
OUR PRODUCTS
Rope Making Machine 2-6 mm
Rope Making Machine 4-8 mm
Rope Making Machine 6-12 mm
Rope Making Machine 8-16 mm
Rope Making Machine 12-25 mm
Rope Making Machine 16-32 mm
Rope Making Machine 16-44 mm
Rope Making Machine 25-55 mm
Extensive Product Range
Akiropes offers a diverse range of rope making machines to cater to varying needs and specifications. Whether you require a machine for producing nylon ropes, plastic ropes, or any other type of rope, Akiropes has you covered. Their extensive product lineup includes state-of-the-art machinery designed to deliver superior performance, efficiency, and reliability
Unmatched Expertise and Innovation
Akiropes boasts a team of seasoned professionals who bring a wealth of expertise and experience to the table. From design and manufacturing to after-sales support, every aspect of their operations is driven by a dedication to excellence. Leveraging the latest technological advancements, Akiropes continuously innovates to stay ahead of the curve and provide customers with cutting-edge solutions.
Competitive Pricing
In addition to their superior quality, Akiropes is dedicated to providing competitive pricing. By leveraging efficient manufacturing processes and economies of scale, they are able to offer cost-effective solutions without compromising on quality. This commitment to affordability makes Akiropes the preferred choice for businesses of all sizes, from small-scale operations to large corporations.
24/7 Support
At Akiropes, customer satisfaction is paramount. That's why they offer round-the-clock support to address any questions or concerns that may arise. Their knowledgeable and experienced team is always available to provide assistance, whether you need help with technical issues, spare parts, or maintenance services. With Akiropes, you can count on reliable support whenever you need it.
On-Time Delivery
Akiropes understands the importance of timely delivery in today's fast-paced business environment. With a well-organised supply chain and efficient logistics management, they ensure that orders are processed and dispatched promptly. Whether you're operating on a tight deadline or planning ahead, you can trust Akiropes to deliver your rope making machine on time, every time.
Conclusion
In conclusion, Akiropes is your trusted partner for all your rope making machinery needs. With superior quality, competitive pricing, 24/7 support, and on-time delivery, they offer a comprehensive solution for businesses worldwide. Whether you're looking for a rope making machine, want to inquire about prices, or need assistance with plastic rope making, Akiropes has you covered. Contact them today to request a quote and experience the difference for yourself!
For More Information:
"Aawadkrupa" survey no-131-A,Navagam Bhavnagar-Rajkot highway Bhavnagar, Gujarat 364060
9510186014,9879615963
0 notes